Blinds made of paper have recently been very popular among housewives who want to create a unique comfort. This window decoration option is universal and multifunctional. But not everyone knows about the method of making blinds from ordinary wallpaper. This solution looks economical and original. To create such a product, you must have a minimum of knowledge and skills. In this publication, you will learn how to create blinds from wallpaper with your own hands.

The heat of summer days makes even the most heat-resistant people hide from the merciless rays of the sun. This is especially true for residents of high-rise apartment buildings, the windows of which are directed to the south. But not always financial opportunities allow you to buy high-quality blinds. Sometimes there is no time and desire to wait until they are made in accordance with the required parameters.

That is why the question of how to make blinds with your own hands is becoming more relevant than ever. For manufacturing, you will need materials that everyone has at home. In addition, at this time, the use of blinds from wallpaper with your own hands (photos of the use of such products can be found in the interior) is a frequent occurrence. This is not only an original, but also an affordable element of room decor. It is also a reliable protection of the room from overheating, and curtains from burnout.

Paper blinds blend harmoniously with the design of any room. But given the characteristics of the material, it is better not to use curtains in the kitchen and in other utility rooms. Blinds from the wallpaper on the windows of the cottage, veranda, loggia and on look organically.

This product has many advantages:

• you can easily create it at home with your own hands;
• reliably protects the room from sunlight;
• unusually decorates the window;

• there is an opportunity to use any pattern or pattern;
• does not interfere with flowers on the windowsill;
• suitable for any interior style;
• can be changed every week.

Paper blinds will prevent unnecessary waste, as well as relieve the owners of the repeated need to go to the workshop. You need to spend only an hour or two on a homemade curtain, no more.

• short service life;

• rapid wear;
• in comparison with salon models, they have a cheap look.

Do-it-yourself blinds on the windows: types of structures

The blinds were invented by the Indians of the West Indies. Their models were distinguished by the presence of shutters with inclined wooden slats, which reliably protected from the sun. These blinds were called colonial.

Venetian blinds appeared in the 18th century. The design of this model was characterized by the fact that the inner sides were attached with hinges, and the outer ones with a cord. This made it possible to change the slope of the lamellas in accordance with the season and weather.

Modern types of products are classified depending on the material from which the curtains are made and on the way they are adjusted. Let's consider the most popular designs:

1. Vertical models are blinds in which the parts are placed vertically and can be rotated at the required angle. You can adjust the rotation of the lamellas with a cord.
2. Horizontal products - curtains, designed in the "ladder" system. The lamellas are placed horizontally, and their tuning is done with a special drum.
3. Roller blinds are blinds in the form of a cloth made of fabric or paper, which are rolled up using a special mechanism. Such products are the perfect choice for the living room.
4. Blinds-pleated - the material of the curtain is folded in the form of an accordion. Adjustment is carried out with special cords and tapes, at the ends of which there are special clips.

When choosing blinds, you need to pay attention to the shape of the window for which the curtain is intended, as well as to the material and ease of regulation.

Helpful advice! For people who want to independently control the level of illumination in the room, it is better to choose horizontal models or pleated blinds.

What is needed to createblinds do it yourself

The question of how to make blinds yourself is of interest to many women. Even people who have never been involved in needlework can make curtains from wallpaper. But before starting work, you must definitely choose the material for the product, tools and decorations for decorating the finished curtain. And the process of creating blinds itself will take no more than 2 hours. The production time depends on the chosen model.

To make blinds from wallpaper with your own hands, you will need the following tools:

• sharp scissors;
• hole punch, awl or similar tool;
• ruler;

• tape measure;
• pencil for marks.

There are such devices in any home, so you don't have to buy them specially. As a material, you need to find:

1. The basis of the curtain is wallpaper. You can use the remnants saved after the repair.
2. To fix the position of the blinds, a tape or decorative cord is used.
3. Adhesive for joining parts.
4. Plain and double-sided tape.
5. A clip (a regular bead, a clothespin to match the color of the wallpaper, or a hair clip will do as well).

Helpful advice! The quality of the curtain depends on the properties of the base. The sturdier the material, the better the blinds will be. It is recommended to choose dense wallpaper, thanks to this, the product will not tear for a long time.

If you choose a restrained color of the canvas, then the curtain will fade slowly, which means it will retain its aesthetic appearance for a long period of time. It is also best not to use material with too large a pattern, as this may affect the visibility in the room.

How to make blinds from wallpaper with your own hands: step-by-step instruction

Blinds made of wallpaper are often used on windows in the country, loggias, balconies, verandas, as well as in rooms with windows facing the sunny side. They look original, and the manufacturing costs are minimal.

Such products are ideal for windows of non-standard sizes, because it is often problematic to buy curtains for these windows. In addition, these models, due to the density of the material, are able to completely protect the room from sunlight.

Before starting work, be sure to remove all unnecessary and prepare the workplace. Indeed, for the manufacture of high-quality and beautiful curtains, you will need a lot of free space. It is important to prepare all the necessary materials and tools.

Step-by-step instructions will help you easily make blinds from wallpaper with your own hands:

• using a tape measure, the glass of the window is measured, for which homemade blinds are made;
• since the fabric of the product is bent in the horizontal direction, then one-fourth of its value, or 30-40 cm, must be added to its length. In this case, the size will be correct. In this case, the width does not need to be changed. For example, if the height of the window frame is 135 cm, it is necessary to add another 25%, which in this case is 35 cm. As a result, a canvas with a length of 170 cm is required;

• the length of the decorative cord or ribbon must be greater than the size of the product; tying bows or knots must be taken into account. Also, this value is influenced by the way of fixing the lower part of the blinds;

Related article:

Types of roller blinds. Dignity. Window installation options. Features of installing roller blinds with your own hands.

• then spread the wallpaper and cut out the required rectangle from the material. It is important to ensure that the drawing on the canvas is not distorted or cut off. To prevent the roll from curling up on the table, its edges can be pressed with a small weight. If the window is wider in width than the width of the wallpaper, then you can connect the two canvases with glue or tape;

• mark out the corrugation and bend the canvas. The stripes should be straight and parallel to each other. It is better not to make the width of the fold more than 7 cm. The optimal size is from 3 to 5 cm. To make the folds even and clear, it is recommended to use a ruler;
• you need to try on the unfinished curtain to the window. If necessary, the excess should be cut off;
• depending on the model, the curtains on the folded material are marked with a pencil in the middle, or marks are left 15 cm from the edges for piercing holes. In the first version, one cord will be passed in the center of the blinds, in the second - two on the sides;
• a hole punch is made along the marked strip. Also, an awl, screwdriver or any other similar tool is suitable for this. The resulting hole must be slightly widened so that a rope or tape can be passed through it freely;
• use scotch tape to strengthen the paper. To do this, it is necessary to paste over the holes on both sides, after which they are re-made with a hole punch;
• then a strong tape or cord is pulled through the holes, then the accordion is straightened along the canvas. The upper end of the tape is fixed with a knot;

• the blinds are attached to the window using double-sided tape. To do this, at the end of the curtain, at the fold, a strip of adhesive tape is glued so that it completely covers the fold of the canvas. After that, the protective coating is removed, and the product is attached to the window;
• at the bottom, the blinds are made in the form of a fan. To do this, the last few strips are connected with PVA glue or glued together with tape. A cord or tape is fixed from the window. Another design option for the lower part of the curtain is to leave it rectangular, tying it up with ribbons from below;
• so that the blinds do not disperse along the entire length of the rope, a retainer must be put on the lower edge. You can use a regular bead as it;
• the product is ready.

This is one of the options for making blinds for a window from wallpaper, but there are a lot of such instructions. The order of the items for creating the structure will be similar, but there may be some differences depending on the type of blinds.

There is an even simpler option for making pleated blinds, in which you do not even need to thread the tape. In this case, the required length of the wallpaper is folded like an accordion, as in the previous version. The finished curtain is attached to the frame with double-sided tape, and the lower part is fixed with a clothespin or hairpin, forming a beautiful peacock tail.

Helpful advice! The holes through which the cord is threaded must be treated with tape, otherwise the product will quickly collapse.

It is very easy, fast, and most importantly - cheap to make curtains blinds with your own hands from paper. You can use unnecessary pieces of wallpaper that were left after repairs, and ordinary utility tools. It is recommended to decorate the finished product with rhinestones, sparkles or patterns. If desired, the blinds from the side facing the street can be pasted over with foil. This will help reflect the ultraviolet rays, preventing them from heating up the space in the room.

For arched windows, paper blinds can be used to decorate them in style with elegant wallpaper fans. This method not only protects from the sun, but also brings special charm to the interior and emphasizes the unusual shape of the window.

If it becomes necessary to close only the upper part of the window so that the sun's rays do not fall on a certain area of ​​the room, for example, a desk or a baby's cradle, then a curtain in the form of a fan is best suited. You can attach it to one of the corners of the frame. This option looks original and stylish both from the inside of the room and from the outside.

You can also watch a video on how to make blinds from wallpaper with your own hands.

Blinds from wallpaper: varieties of paper products

Homemade blinds can add variety and unique color to the interior of the room. There are several options for such products. Let's consider them in more detail.

The curtains in the form of an accordion on a ribbon or cord and a model with a similar design, but on two tightening ropes, are extremely popular. Usually in such products, they are located vertically and parallel to each other, but on opposite sides of the edges. Photo blinds from wallpaper will help to harmoniously fit this model into the interior of the room.

It should be remembered that for the manufacture of such a curtain, two clamps are needed, and the consumption of cord and tape will be twice as much. This model is identical to real factory curtains. Such blinds perfectly close windows, which means they protect residents from the sun's rays and the prying eyes of passers-by.

Paper blinds are very popular. They look impressive, and also perfectly cope with the protective function. Since such models fit snugly against the window, they darken the room remarkably. Making blinds with your own hands is very easy. Often, fabric is used as the basis for such a product, rather than paper.

Helpful advice! It is recommended to use paper first to create the blinds. After all, a piece of spoiled wallpaper will cost the hostess much less than a piece of fabric of the same size. But fabric roller blinds look more spectacular.

No less original type of blinds made of paper is a Roman blind. To make such a product, more material will be required, and some skills are also required. But they look so original and beautiful, like lambrequins or ordinary curtains.

Any version of wallpaper blinds will be an excellent option for decorative window decoration.

Making roller blinds with your own hands from wallpaper: a master class

There are a huge number of ways to make paper blinds with your own hands, step-by-step instructions, master classes, thanks to which you can quickly get an original and cheap decorative window addition.

You can see the features of making blinds from wallpaper on the video with your own hands. The main thing is that the curtain does not need to be folded in the form of a pleat, but it is enough to wind it into a tight small roll. It also eliminates the need to make holes for the cord. The fastening system of this type of blinds differs from previous models.

Before making blinds with your own hands, you need to prepare the tools:

• drill;
• hacksaw for metal;
• pieces of wallpaper;
• a metal tube with a diameter of 1.8 mm;
• a wooden or plastic plank for a plumb line;
• blinds mountings 1.4 - 2 m;
• superglue (for gluing fabric to metal);
• double sided tape.

Instructions for creating do-it-yourself blinds from wallpaper step by step with a photo:

1. The taken measurements of the window are transferred to paper.
2. The length of the future product should be doubled. The paper must be folded in half to ensure that the blinds are tight. In addition, add another quarter of the total length.
3. The resulting piece is folded in half. The edges of the material are connected with glue or double-sided adhesive tape.
4. Saw off the metal tube of the required length.
5. At the ends, using a stapler, pockets are made into which small weights must be placed. You can also use a wooden plank or plastic tube for a plumb line.
6. The glue is applied to the wallpaper and glued to the prepared tube.
7. Blinds are installed on the window. Marks are made on the frame according to the size of the curtain. Using a drill, the resulting product is attached to the window.

Do-it-yourself roller blinds can be made easily, quickly and efficiently; and they will be no different from the store options.

Two-layer paper curtains with an air gap: step by step instructions

This option is a little more complicated than previous models, which means it will take a little more time and effort than a regular pleated pleat. But such a product looks more stylish and respectable, and it also reliably protects the room from the heat.

To make two-layer blinds, the wallpaper must first be marked and then cut into strips about 10 cm wide. The cut strips must be twisted into a tube and the edges must be glued by 1 cm. There must be enough such tubes to cover the entire window height.

When the glue is dry, the tube must be pressed against a flat lamella so that the ribs on the sides of the part are clearly formed. You need to fold so that the gluing point is in the middle of the upper side.

Further, the middle line of each lamella is smeared with glue with a strip of about 1 cm, then all the elements are connected to each other. During operation, the glue should not flow, therefore it is better to use dry. Leave the stack of glued tubes to dry completely. Only then can the resulting structure be expanded.

At 15 cm from the edges with an awl or other similar tool, it is necessary to make holes through which the cord is passed. It will not be visible from the outside, since it will pass through the inside when it is threaded through the edges of the ropes.

You can hang these air blinds using two rings tied to the upper ends of the rope. They are hung on hooks that are screwed into the upper slope of the window opening. In the case of plastic windows, double-sided tape should be used, since the produced curtain is very light.

Blinds from wallpaper: video-instructions for creating a paper curtain

Self-made blinds from wallpaper are an excellent choice if you need to quickly curtain a window. A paper curtain made from the remnants of unnecessary wallpaper is an excellent homemade protection of a room from the bright sun. Such blinds perfectly complement the design of an apartment or house and are a worthy alternative to conventional curtains.

It is very easy to make such blinds on windows from wallpaper with your own hands and you do not need to spend a lot of money and time. There are a huge number of workshops and instructions for creating blinds from wallpaper with your own hands step by step. This is what explains the enormous popularity of the products.

Not many people know the method of producing blinds from wallpaper. Although such a solution is more economical and original than a factory product. For manufacturing, you need a minimum of material and a little skill.

Blinds from wallpaper

Paper blinds are becoming more and more popular among housewives who love to create coziness with their own hands. In addition, this option for decorating window openings is not only versatile - it can be used in the kitchen, in the hallway and in the bedroom, but also multifunctional - you can completely shade the room or partially. The product will fully correspond to the interior, since the craftswoman can easily choose the color scheme, as well as the shape, by purchasing the necessary wallpaper.

What is needed first

How to make blinds is of interest to many hostesses, but it is also important to prepare correctly: choose the material, tools, decorative decorations for the finished curtain. You don't need much time for work - only 1-2 hours. It all depends on the complexity of the model.

Tools for making curtains from wallpaper:

1. Sharp scissors so that the edges do not break and are neat;
2. Hole puncher. It is better to take a purchase, so it will be easier to thread the fixing cord later;
3. Ruler for aligning the edges;
4. Measuring tape - calculation according to the measurements of the window;
5. A simple pencil for marks during the preparation of a sketch of the future product.

Such devices can be found in every home, so there is no need to specially purchase equipment.

As for the selection of material, you won't have to worry here either:

1. The wallpaper that will make up the base of the curtain;
2. Tape, decorative cord - will fix the position of the wallpaper canvas;
3. Retainer. Instead, you can use regular beads;
4. PVA glue;
5. Scotch.

Important ! The lifespan of wallpaper blinds directly depends on the quality of the wallpaper.

As for the choice of wallpaper, there are some features that will affect the type of blinds and the service life. It is better to choose dense wallpaper so that the curtain does not tear for a long time and completely closes the windows. The colors are preferably restrained, such wallpapers will fade slowly, which means they will not lose their aesthetic appearance for a long time. The pattern should not be too large - this can affect the visibility in the room.

Step-by-step instruction

Attention ! The holes into which the cord will be threaded must be covered with tape so that they do not fray.

It is very easy to make blinds out of paper, and most importantly, quickly and inexpensively. For manufacturing, you can take the rest of the wallpaper after repair and ordinary utility tools.

Varieties of paper blinds

You can make a wide variety of blinds with your own hands, which will bring a unique flavor to your interior. Curtains of a similar design are very popular, but unlike the above, they have two tightening cords. Usually they are placed vertically to each other on opposite sides of the edges.

The only thing that should be taken into account is that you need two clamps and the consumption of the cord, as well as the scotch tape, will increase. But the product, designed in this form, is identical to the real factory blinds. The curtain remarkably closes the windows, protecting the inhabitants of an apartment or house from the sun's rays and curious looks.

Paper blinds are very popular. They look very impressive, while completely shading the room, as they fit well to the window. It is very easy to make a roller blind with your own hands. Often, in the manufacture of roller blinds, they do not take paper, but fabric. But it is better to study on paper, since a damaged piece of cloth will cost the hostess much more than a piece of a roll of wallpaper.

The peculiarity in the manufacture of roller blinds is that it is not necessary to fold the paper into an accordion - it is enough to wind it into a tight small roll. There is no need to make a hole for the tape, which will fix the state of the curtain. The fastening system of this type of paper blinds differs significantly from those already listed.

There are situations when, when decorating windows, you want not to spend money on buying new curtains, but to save money and show your imagination, creating them on your own from scrap materials. And what could be easier and easier than paper crafts? What can you do with your own hands out of paper, which is rather uncomplicated and at the same time necessary in an apartment? A little tip - paper blinds or pleated curtains from wallpaper. Despite the seeming simplicity, such a decor not only looks beautiful and aesthetically pleasing on the windows, but also practical: you can create such curtains in just a couple of hours, and they will last more than one season and will cost you completely free, because there are remnants of wallpaper in every home. In addition, windows and walls during their installation are not subject to mechanical damage, because you do not need to drill, nail or twist anything - the curtain is hung on double-sided tape. And to update the interior, it is enough to spend another couple of hours and create new blinds from the remnants of wallpaper of a different color.

Wallpaper curtain - step by step instructions with a photo

Homemade paper blinds and curtains can be of different types: roller blinds, Roman ones. This master class talks about how to make pleated blinds for plastic or wooden windows with your own hands from the remnants of non-woven wallpaper, using very few tools and materials.

Before starting work, we collect the necessary minimum from the following list. We need:

1. Wallpaper.
2. Scissors or a utility knife.
3. Ruler and pencil.
4. Double-sided tape.
5. Rope.
6. Roulette.
7. Hole punch or awl.

Then, step by step, we perform the steps listed below, which are presented in stages and supplemented with photos for clarity.

Step 1

Using a tape measure, we measure the window frame (if the frame is hinged with a handle, the measurement is made to the base of the handle) or the glass unit itself, on which the produced blinds are planned to be installed.

Measurement of the glass unit along the inner edge of the glazing bead.

Step 2

We unfold the roll on a flat surface, measure the required length and draw a perpendicular line along which we cut it. Please note that the length of the cut wallpaper, taking into account the folds on the produced blinds, should be 25-27% more than the height of the measured window.

Example: during the measurement, it turned out 130 cm, therefore, we cut the wallpaper with a length of 162-165 cm

Step 3

We mark the trimmed canvas along the entire length on both sides symmetrical to each other, with risks for future corrugation. As a rule, the width of each strip varies within 3-5 cm, but you can skip this recommendation and make it a little wider. Then we fold the "accordion" along the marked lines as shown in the photographs.

Advice for the lazy: you can not mark the canvas, but simply adjust all subsequent folds to the width of the second fold. The main thing is to make sure that all the folds are the same size, except for the very first one, on which the curtain will be hung. Its width is calculated from the width of the double-sided tape that we use, plus a 1-1.5 cm tolerance.

Step 4

After the "accordion" is assembled, measure out the middle of the width and mark this place along the entire thickness by drawing a line from top to bottom, as shown in the photographs. We draw a line on the side where there is no drawing, from the same seamy side we will make holes with a hole punch. You can also "make holes" with an awl, but with the help of a hole punch, the holes are smoother and more aesthetic. In any case, the distance from the edge to the puncture should be 8-10 mm.

Step 5

We pass a guide rope through the prepared holes.

Step 6

We fasten the rope stretched through all the blinds with double-sided tape to the fold, which is planned as the upper one. To do this, cut off a strip 8-10 cm long from the tape and glue it in the middle of this fold. Then we make a loop on the guide rope and also glue it on top of the scotch tape as shown in the photo.

After that, already on top of the loops on the same fold, we glue a continuous strip of adhesive tape over the width of the wallpaper (we do not remove the upper protective film from it yet) and proceed to the next step.

Step 7

The next step is to create a "fan" at the bottom edge. To do this, again cut off a small strip of scotch tape, less wide than the width of the lower fold strip and about 15-20 cm long. We glue it on one side, considering the hole in it as a separator for the sides of the strip width, as shown in the photo below. Then we remove the protective film from the adhesive tape and bring the ends of the bottom edge together to form a "fan". We press the folds together.

Everything! Original and beautiful blinds from the wallpaper, created with your own hands and this master class, are ready. It remains only to hang them on the window sash.

Step 8

We remove the protective layer from the tape, hang our pleated curtain on one of the window sashes, adjust its length to the desired height and fix it. To fix the required length, we make an easily untied knot at the end of the rope.

You can use additional clothing accessories: instead of a knot, use a retainer, and install a tip on the end of the guide.

Blinds from wallpaper made with your own hands and this step-by-step instruction will look great on both wooden and plastic windows and will perfectly fit into the interior of not only a room, but also a glazed loggia or balcony.

Another of the possible pleasant additions to the creation of paper homemade products will be their joint production with the kids. Kids love any kind of paper craft. Create a comfortable environment for co-creation and make curtains for the children's room together. But keep in mind that such curtains have an "accordion" shape and even when they are lowered to the end, folds remain on them. Because of this, any drawing looks broken, and the images of cartoon heroes and princesses so beloved by boys and girls will have to be abandoned. For boys, in this case, pictures with marine motifs or abstract geometric shapes are suitable. For girls - prints with flowers, hearts, jewelry. There are many options, the main thing is to approach the creation of blinds for windows from wallpaper with imagination and inspiration.

How to make blinds from video wallpaper

[Voters: 15 Average rating: 3.8]

Russia, Moscow region, Moscow +79041000555

Do-it-yourself wallpaper blinds: various methods and step-by-step master classes

It takes ~ 6 minutes to read

Save

In winter, you want light, and the curtains on the window move as far as possible. And in the summer you need to hide from the scorching sun and protect the interior of the apartment from its rays. There are blinds for this. They were invented in hot countries - in India, in Spain. They do not let in the scorching light of the sun and close the room from prying eyes. In this article, we'll talk about how to make them from wallpaper with your own hands.

Blinds in our climate are widespread in offices, shops, in our own apartments. They are easy to buy, but there is an opportunity to save your money and make them yourself from wallpaper. Everything you need for this is in every home. After all, after the repair, there are always unclaimed rolls. These curtains are needed for apartment windows, balconies, summer cottages. If there is not enough leftover material for all the windows, then they can be bought in addition in stores for repairs.

Advice! Ask the seller for discounted rolls left over from the sale. They are excellent in quality, and the price is much lower.

Save

It is easy for any person to make them on their own. Everything you need for this is in any home.

First of all, you need to decide which wallpaper to make the product from. They should be strong, but not too thick. You need to pay attention to their pattern so that it is in harmony with the color of the curtains, furniture of the room. An interesting option when they are made of the same wallpaper with which the room is pasted over.

The first way

For work you need:

• a roll of paper wallpaper with a length of at least 1500 mm;
• scissors;
• meter ruler and pencil;
• cord 1.5-2 mm thick;
• awl;
• double sided tape;
• retainer;
• decorative tape.

Save

We measure the window. Blinds can consist of one wide strip or two narrow ones. The width of the strip should be equal to the width of the window, the length should be equal to the height of the window plus 25%.

It is more convenient to work on a large area. Cut off a strip of wallpaper of the desired size, lay it out on the table, place weights at the ends so that the roll does not roll up.

The strip must be folded with an accordion of 3-15 cm. To make the accordion neat, you need to draw the wallpaper along a ruler. First, place points on the selected width on both sides of the piece. Then connect them with a ruler. In childhood, many people made toys by folding paper like an accordion, so the process is clear to everyone.

We make the first folds using the edge of the ruler. We apply a ruler to the line, bend it. Draw the side of the scissors or a blunt knife along the fold line so that it is clear and fixed.

Save

When the whole accordion is ready, stepping back 15 cm from both ends, we make holes with an awl through which the cord will be pulled through to lower and raise the curtain. If you are planning a wide strip for the entire window, then make more holes in the middle so that the blinds do not bend. If the curtain is narrow, then the holes are made in the middle of the strip, but on the sides it is not necessary.

The next step is to pull the cord into the holes with a large needle or crochet. Its tips need to be melted, the lower edge fixed in a retainer, you can buy or cut from an old jacket. It is needed to keep the curtains at the correct length.

On this, you can finish the production by decorating them with a satin ribbon, tying a bow out of it. The bottom of the curtain will be straight and horizontal.

You can finish the blinds with a peacock tail. If a rope is threaded through the middle, then the opposite ends are connected together and glued, a beautiful fan is obtained.

Save

There are windows of complex shape - at the top there is a window in the form of an arch. Then they can be made in the form of a fan, as at the end of the curtain, and the window can be closed completely. If the arch consists of two half-arches separated by a wooden partition, then we make two half-fans and close each half-arch.

If there is no need to close the entire window, but you need to shade part of the room, then we make a fan of the required size and close part of the window. We fix the blinds from the wallpaper on the window with double-sided tape, it can withstand up to 3 kg. You can make another homemade mount - then glue a strip of thick cardboard to the last accordion, use nails or other fastening material.

Second way

Save

There is another, more complex way of making curtains from wallpaper. They provide better protection from the sun because they are double:

• Wallpaper must be cut into strips with a 100 mm busbar.
• The strips are twisted and glued into tubes, the number of them must be sufficient to cover the entire window.
• After drying, the tubes are compressed into a flat lamella with clear ribs, and the place of gluing is placed on top in the middle.
• The tubes are coated in the middle with glue and glued to each other in a high stack. To avoid smudging and leakage of the glue, dry glue is used.
• After complete drying, holes are made at a distance of 15 cm. Ropes are passed through them, the lower ends of which are clamped with a retainer. Thanks to these cords, the blinds can be raised and lowered.
• Attach them to two plastic rings and hang them on nails driven into the window frame. Or simply glued with double-sided tape.

Roller blinds: DIY step-by-step instructions

Blinds or roller blinds. How to make them yourself? This method is the easiest. No need to fold the wallpaper into an accordion, no need to pierce holes and pull a cord through them.

You need to measure a piece of wallpaper two lengths of the window plus another quarter:

1. The cut piece is folded in half for strength, glued at the ends with glue or double-sided tape.
2. At the edges, pockets are folded back and stitched with a stapler. Weights are threaded through them - wooden planks.
3. A tape of two lengths of curtains is attached to the upper pocket. Thrown on both sides.
4. Blinds are glued to the window with tape. They are made in the same way, you can only take a different number of tapes that hold the roll. You can take one wide ribbon, reinforce it in the middle, unfold the curtain to the desired length and tie a beautiful bow. Or, tie two ribbons on the sides of the roll with a bow at the same height from the windowsill. The roller blinds are ready.

Master class for making blinds from newspapers

The manufacturing process of this type is the most difficult and most time consuming.

Save

You will need:

• newspapers;
• beautiful cord;
• two plastic rings;
• rope;
• Crochet hook;
• paints, brushes for coloring newspaper tubes.

For blinds, up to 200 newspaper tubes 400 mm long must be screwed onto a standard window. Long tubules can be trimmed on the fly.

Master class: the newspaper is wound on a thin metal rod, usually a knitting needle is taken. Having rolled a piece of newspaper on it, they glue the edge of it. All straws should dry well. Then they are painted with acrylic paint. It is recommended to add PVA glue 3 to 1.

After painting and drying, the most crucial moment comes. A large number of small round tubes need to be connected into a strong canvas.

The first method of connection: fasten the tubes, intertwining with a rope, making one or two knots. It is advisable to lubricate each unit with glue for greater strength. You need to start from the top of the curtain. The rope should be almost twice the length of the curtain. We tie the upper end to a plastic ring. Now you need to intertwine both ends of the cord from the inside and outside.

Save

The second option is used by those who know how to crochet at least a simple chain. This method is more reliable, the tubes are tightly held by a cord chain, do not untie and do not stretch.

At the bottom, the cord is tied to a knot, we coat it with glue for strength. We lay out the canvas on a flat surface and align the tubes, cutting off too long.

Drive nails or special hooks into the window frame. It is easy to hang the canvas on them by the plastic rings. In any case, the curtains are easy to remove on a cloudy or rainy day.

In order not to remove the blinds completely, you can take a beautiful satin ribbon, strengthen it on top and lower the curtains on both sides. At the bottom, at the desired height, tie the ribbons into a knot and knit a beautiful bow. These homemade curtains are an option for roller blinds.

Blinds repair

Old faded plastic, paper or wood blinds can be restored with wallpaper. It is necessary to choose the wallpaper that best suits the interior of the apartment, enlivens and decorates it.

You will need:

• wallpaper;
• old blinds;
• PVA glue;
• scissors;
• ruler;
• pencil.

On old curtains we measure the width, length and number of slats. Draw the same stripes on a roll of wallpaper. We mark the places of the holes in the old blinds in order to make cuts later. Cut out the strips and glue them onto the old slats. Cut into three parts at the holes. We try to glue one by one, without disturbing the wallpaper pattern.

Trying on the windows, admiring the updated curtains.

How to make do-it-yourself roller blinds from wallpaper, other options

If there are small pieces of white wallpaper left, then we advise you to make curtains with your own hands using the tucking technique. This technique originated in Ukraine and is now used everywhere. Patterns are cut out of paper. It turns out paper lace that looks good on the window day and night.

To make such a paper curtain, you will need knives, scissors, a wooden rug, pattern patterns. On the Internet, you can always find tips on this option for making blinds with your own hands from the wallpaper step by step and photos of patterns for cutting. With skill, diligence, patience and accuracy, real works of art are obtained.

Save

Another option is Roman shades. They are usually made from fabric, but wallpaper can also be used. They need more material and more time to craft.

Blinds are a practical piece of home decoration. They protect people and the environment from the harmful rays of the sun. In addition, these are not only useful, but also beautiful things in the interior.

When you want to design your own in a design way, it will be useful to study the instructions on how to make blinds from wallpaper with your own hands. The HouseChief editors in this publication will analyze in detail all the points regarding the design of double-glazed windows with photo examples. After all, protection from sunlight in the house should be beautiful and practical.

Read in the article

Advantages and disadvantages of wallpaper blinds

Suppose you have unwanted rolls after the repair. It is quite possible to use them for the organization of light-protective cloths on the windows, that is, for the manufacture. However, before you start creating a useful accessory, you should familiarize yourself with the advantages and disadvantages, which sometimes become decisive.

First of all, let's consider the benefits:

As for the disadvantages of this invention, it is not subject to wet cleaning and very quickly fade in the sun. Therefore, after a while it turns into a very unattractive product.

Interesting ideas for blinds on windows from wallpaper with your own hands

If you are faced with the question of how to make blinds for windows, you should first determine the required dimensions. It all depends on the width of the window opening and the frame itself. It is from this that it is worth starting from when developing a design. Let's take a look at some incredible ideas that will transform a room.

1. Floral designs... Various colors can participate here, but more often pink, lilac and green predominate. This design can be done in the form of a "Peacock Tail" and an unusual accordion. Often, a light, colorful version of the blinds is hung.
2. Accordion blinds - pleated... If they are made correctly, they will add zest to the interior design of the room.
3. ... This is one of the simple ideas on how to make wallpaper blinds. There is nothing to tinker with here, except for a small decorative mount. Such curtains last longer than others and perfectly regulate the intensity of light transmission.
4. Accordion "Inside" it is considered a completely complete solution for windows if the morning sun enters the room. The manufacturing process is pretty straightforward. There is also the option of folds to the outer edge of the window.
5. If there are already ready-made blinds, but I want to diversify them, why not glue pieces of colored wallpaper to the stripes. But here it is important to accurately determine the dimensions so as not to disrupt the closing-opening function.

In addition, the housewife does not have to limit herself at all in her fantasy. Why not create your own design idea and surprise your guests?

How to choose components for the manufacture of blinds

When choosing materials for making homemade blinds for windows, you can use any kind of paper wall coverings (it is desirable that they have a good density). At the same time, it is better to pay attention to those that will match (this usually happens, since the remnants of the pasted ones are used).

Wallpaper

In addition to those materials that remain after, you can use completely different ones. Canvases can be chosen according to your preferences.

Please note that colors that are too bright will not work in sunny rooms. Such options fade very quickly and lose their presentable appearance. But the models of rolls in light colors will retain their freshness longer.

As for the density, paper wallpaper should be preferred for training in making. They flex well and hold their shape throughout the season. But ordinary paper practically does not darken the room, and if it is urgently needed, then why not use vinyl or non-woven?

Suitable tools

To decorate windows, you will need a small list of tools and improvised means, namely:

• scissors, hole punch, ruler;
• decorative tape, retainer, lace;
• glue or double-sided tape;
• nippers, painting knife.

You cannot do without the listed list in order to fix ready-made blinds in the window opening. The fittings can be plastic, silicone or metal. The main thing is that the hostess has the skills to work with them.

On a note! Our detailed instructions with photo instructions will help you study in detail the entire process of making blinds from wallpaper with your own hands and repeat it in your apartment.

Features of making blinds with your own hands on windows in the form of an accordion

Blinds from wallpaper are considered so affordable that they can be made without difficulty, the main thing is to prepare so that all the components for work are at hand.

What is needed for manufacturing

First of all, you should prepare the tools for each stage of the work. Then they can simply be removed to the side so as not to interfere. What will come in handy:

• scissors, tape measure;
• double-sided tape, lace;
• clamps with a spring;
• hole puncher;
• the wallpaper itself.

Instead of a hole punch, you can use a simple pencil with an empty grater box at the end. Only it will be many times longer and more difficult to work in this way.

How the window opening and frame are measured

Depending on how the paper curtain will be fastened, the parameters should be measured. To attach the curtain to the outer edge of the window opening, it is necessary to measure its length and width, and add 10 cm down and on the sides to the blinds as a reserve.

If the fixation of the paper curtain will be carried out inside the opening, then it is advisable to make its size 5-10 mm narrower. As for the fastening on the frame, here it is necessary to measure against the glass and use the dimensions of the canvas exactly. It is even easier to try on the canvas on the window and add to it half the height of the window downward, because when bending, the length decreases slightly.

For the convenience of taking measurements, a laser tape measure is suitable. With its help, you will definitely not make mistakes.

Do-it-yourself blinds from wallpaper step by step: detailed photo instructions

It is preferable to work on a large free surface. Best of all, on a clean floor. Prepare him for this: remove the tracks and wipe. Next, we act according to a strict algorithm, illustrated by a photo, which will help to make blinds from wallpaper with our own hands.

Illustration	Description of action
	We prepare the necessary equipment and make sure that they are in harmony with the interior.
	We make segments according to measurements, if necessary, we glue the width on the sides. This is done only if the wallpaper is narrower than the window opening.
	Next, we do accordion folding. For convenience, we take a ruler, the width of each fold should be 3-4 cm.
	We fold it with an accordion almost to the very top. You can leave a piece to fix to the frame, but not necessarily. We fix the ends with a clothespin and leave for a while.
	Then we bend the entire resulting structure in half to get a fan with a gap in the center.
	We make a through puncture in the center with an awl. The upper part of the resulting fan is used for gluing.
	Using a gypsy needle, thread through both holes. In this case, the length of the lace should be greater than the length of the finished curtain. We lower our clamp almost to the very bottom.
	We pass the lace through the hole in the wallpaper and glue it with tape to the inner side of the fold so that the puff is held tight.
	We glue two strips of double-sided tape. If it is wide, then one tape for the entire width will be enough.
	Little by little, peel off the protective tape of the tape and glue it to the frame or slope. We adjust the height of the canvas using the clamp.

We see that the process of making paper blinds takes about 30 minutes. At the same time, the result is quite unusual and rich, despite its budget.

DIY workshop on making roller blinds from wallpaper

Do-it-yourself roller blinds-curtains from wallpaper are an excellent option for decorating double-glazed windows. They can be made from any kind of paper wall covering. If you want the curtains to cover the entire window, then, most likely, two halves of the canvases will come in handy. You can also choose broader options. Do-it-yourself blinds made of non-woven or vinyl wallpaper are considered a good alternative to paper, since this business requires smooth canvases that are difficult to wrinkle.

What you need to work

Stock up on material that is truly appropriate for the particular room. And for the work itself, they will come in handy:

• roll (not whole);
• tube for securing the roll;
• scissors, double-sided tape;
• fixing tapes.

To create rolled paper curtains, it is necessary to provide for the option of fastening to the window, otherwise breaks in the structure of the wallpaper and their unreliable fixation in the opening are possible. An excellent solution would be to install a special cornice.

Removing window dimensions

The most convenient way to measure a window is to use a wallpaper canvas and figure out what width you need for the opening. If the roll is too narrow, you can expand the canvas a little by gluing additional strips on both sides so as not to spoil the design.

If you measure the width of the window with a tube, then you do not need to know the exact value. Attach it to the window, cut off the excess and, relying on its length, select the required width of the wallpaper.

We make blinds from wallpaper with our own hands: step by step instructions

It is not difficult to make roller blinds from the remnants of wallpaper, the main thing is to follow the instructions and do not forget important points. Let's take a closer look at the whole essence of the process.

1. We take the selected tube (you can use the old one from the factory roller blinds), glue the tape of double-sided tape along the entire length.
2. We fix the inner part of the wallpaper on the tube and wind it up to the end.
3. We bend the lower end of the wallpaper, insert it into the weighting bar in a special groove. It is important that this weight covers the entire length of the blinds.

There remains little to do: fix the finished paper curtain in the window opening. For details on how to make blinds from wallpaper with your own hands step by step, see the video at the end of the publication.

How to fix a curtain rod for a roller blind

For fixing, it is better to use specialized cornices with brackets. These models are sold in stores. They have special grooves and rope mechanisms that will securely fix the roll and will freely adjust its height.

You can independently insert special regulators or an axis with a holder into the tube, which will play the role of a curtain lifter.

Do-it-yourself paper blinds "Peacock's tail" from wallpaper: what is important to remember when making

It is the rounded options that are considered the most popular today. They are suitable not only for rectangular windows, but also look perfect in semicircular double-glazed windows. To properly build this element, you need to study a few useful tips:

• to obtain an inseparable semicircle at the base of the paper blinds, you can use double-sided tape, gluing the two ends together;
• when installing a fan-shaped structure in a semicircular frame, it can be made from several canvases glued in width and simply fixed at the bottom point with glue or a clothespin;
• semicircular wallpaper curtains can only partially cover the window, for example, from the top. These options are usually stapled underneath with a stapler with large staples.