Open-end wrench holder. DIY wrench holder

A garage space is often combined with a workshop. The tool storage system in the garage must be thoughtful... Ready designs GOSNITI are considered optimal.

The DIYer who wants to save money will need to make tool racks in the garage materials at hand... Complex mechanisms equipped with movable elements can't easy to store.

To make the correct placement of the tool in the garage and put things in order, there are the following options organizing storage:

• on shelves;
• on shelves;
• in closets;
• at the stands;
• on the shields.

There are shelves of various modifications:

• hinged;
• closed;
• stationary;
• mobile.

Various materials are used for their manufacture, such as metal or wood... Small parts require hinged shelves... They are usually placed at the chin level of the garage owner. If inventory has often use, for him are better suited open structures, and in the closed store unnecessary things.

See how you can make an interesting DIY storage tool for a garage:

Direct competitors of mobile shelves are movable boxes... The device has specialized containers for the tool.

Factory tool racks in the garage are made in accordance with GOST... These ergonomic designs are easy to DIY. To store large units or tires, you will need large shelving.

If you want to make a tool cabinet in the garage with your own hands, then there should be special drawers or bags... This storage allows to avoid dust. You can also rationally use side walls... With the help of special tool holders in the garage, a place is equipped for fixing the planer... On the doors you can place holders made of pieces of rubber hose.

A skilled craftsman will make a stand for a tool in the garage with his own hands. The material for its manufacture is chipboard sheet... Additionally used as tool holders metal cans from canned food.

How do I store tools in the garage?

A convenient storage place is considered shield, or storage panel, or simply garage tool board... Screwdrivers, wrenches, pliers are fixed on them. To make a tool shield in the garage with your own hands, use an array of boards and strong hooks. The complete set depends on the master's own preferences.

How to place the tool in the garage on the wall - photo:

As you can see in the photo, storing a tool in the garage with your own hands is not at all difficult to organize. All you need is desire and a little patience.

Keeping keys with tools on the garage wall

How do I mount the tool to the garage wall? The optimal storage system for tools in the garage involves the use of the entire wall area.

1. After installing the horizontal guides, they are suspended shelf sections... Little things like nails and screws can be put in plastic jars that contain mayonnaise or horseradish. Their lids are screwed to the shelves.
2. Can be made for nuts, washers, scissors and for keys stand in the garage with your own hands. Special hinges make wire... Washers with nuts are strung onto the split ends, and the dimensions of the fittings are indicated on cardboard tags. Scissors with keys are hung on metal hooks.
3. For drills, cutters and storage of keys in the garage, attach to the wall foam pad... They are firmly fixed in the elastic material and can be easily removed from it if necessary.
4. Another mounting method for garage tools is disposable plastic plates. If you cut them into two equal parts, you get blanks... Then they are attached to the wall with self-tapping screws. The resulting pockets are used to store circular saws or grinding wheels.
5. For storage of clamps it is recommended to use rectangular plywood box... It is fixed to the wall and then the handles of the clamps are placed in it.
6. Sturdy wall mounts are designed to store bicycles... Their base must be metal.
7. In order not to lose the screwdriver of the desired size, they use magnetic holder... Then they are always in sight.
8. From hooks with paper clips, the craftsman will quickly make device for canvasesdesigned for tape slabs.

Convenient panel for storing tools in the garage, which does not take up much space:

Perforated panels are essential for organizing work in a garage, workshop and car service. They complement the shelving units in order to achieve the best ergonomics in the workplace. If you position the tool that is used most often above the workbench, then you no longer have to rummage in boxes in search of the right things. Just as quickly and conveniently, the technical equipment is hung back after use. At the same time, at the end of the working day, it is visually clear that since the hook is empty, it means that the key is lost or remained, for example, in the car during the repair process. You need to find it and hang it back. We recommend using perforations even if the rig is stored in the nightstand. During the renovation, when you change various fixtures, a mess on the countertop is involuntarily created. If you hang everything you work with on suspensions, the surface is freed from unnecessary items. Hanging the key is much more handy and faster than constantly putting the fixtures in the boxes. The holders hold not only the tool, but also consumables. So, for example, in the case of work related to the electrician, all kinds of terminals, cambric, electrical tape are hung, and when doing embroidery, it is very convenient to store a set of threads on the panel. Doing your favorite hobby brings more pleasure, manual labor brings additional comfort when the workplace is in order.

The perforated board can be installed on or fixed to the wall with self-tapping screws. Especially for this, its dimensions correspond to the length of bollardless, single-bollard and double-bollard models. The screen is attached to the table with special stands and brackets. Installation of one or two panels is possible. The cutouts on the panel flange are made in such a way that it can be hung horizontally and vertically, which helps to optimally fill the area, bypassing existing communications and relief.
Wall mounting is simple enough. There are 4 notches on the back. 4 screws are screwed in, and then, the panel is hung on them, like a wall clock. You can make the markings before drilling with any thin sharp nail or awl on the front side.
The hole pitch is 15mm. This allows the shield to be filled with the necessary tool as much as possible. The distance between the centers is 30mm. The diameter of the holes of the perforated screen is 5mm. For screwdrivers, grippers, and other small items, special ... Wall perforation This model is used to accommodate heavy items.
The products are painted with a polymer coating, which is immune to temperature extremes and aggressive substances.

Many thematic forums on the Internet are full of reports on how to put things in order using a perforated panel. With us, your desire will come true. We will help you to solve specific problems.

Perforation loads

Perforated panel length		1000mm	1390mm	1900mm
Perforation hung on the wall	Series "Standard"	68kg	60kg	60kg
	Series "Light"	55kg	50kg	50kg
If the perforations are mounted on brackets on a workbench, the distributed load is 100 kg.

This handy DIY wall-mounted tool holder will be appreciated by any man. Such a device allows you not only to keep all the tools in sight and at the same time at hand, but also to keep them in order, while freeing all the working surfaces. How to make a similar board with magnets for your workshop or garage on your own, then in step-by-step instructions.

Materials

To work you will need:

• boards;
• hot glue sticks;
• hook screws;
• thermal gun;
• sharp knife;
• magnets;
• the tools themselves.

Step 1... First, take measurements from the wall and decide on the dimensions of the boards, which will be the base of the holder.

Step 2... Adjust the boards to the parameters you indicated and sand the cuts.

Step 3... Lay the boards out on a work surface. Prepare the magnets and the tools themselves.

Step 4... Conduct a rough trial of where, how and what tools will be attached to the board. They should be located at a distance from each other so that during work, when taking any of them, you do not cling to neighboring ones with your hand. Consider mounting options for each tool.

Step 5... Mark the places where the magnets are attached with a pencil. Place the magnets on hot glue.

Step 6... If everything is clear with small magnets for oversized and not heavy tools, then you can take such a long strip of magnets to fix a number of screwdrivers.

Step 7... To attach stationery knives in a plastic case, you will have to glue a small piece of magnets to them as well. Otherwise, the knives will not stick to the board.

Step 8... If you have tools whose metal can scratch the holder and spoil the appearance of the board over time, such as this vernier caliper, attach a piece of heat shrink tubing over the magnet. Take the magnet itself more powerful.

Step 9... To attach a mini-spotlight, which is used during soldering or other small work, place it with its base on a metal plate and screw it to the board with screws.

Step 10... Attach a set of drills and bits to hooks for convenience. When purchasing them, pay attention to models whose fastening ends are like self-tapping screws.

Step 11... Place a long flat metal ruler on several small magnets at once, placing them at a short distance from each other.

Step 12... A saw with an aluminum handle is a little more difficult to fix, as aluminum magnetically worse. To do this, you will have to modify the saw a little by riveting a metal part onto it.

Step 13... To hold heavy screwdrivers on a vertical board, attach them to neodymium magnets or pieces of magnetic disks. They are much more powerful than conventional ones, and will cope with this task.

Recently, perforated panels designed for storing tools have become firmly established in various workshops. With their help, you can conveniently and compactly arrange any working tool in production or in a car workshop. Also called cabinets or layouts, perforated panels have a design and functionality that allows you to equip the storage for any need. They can be made of various materials and supplemented with convenient layouts.

Perforated panels - description and materials

The panel is a sheet of wood-based material or metal with stiffeners along the edges and perforations on the working plane. Such holes allow convenient place and comfortably use tools, small-sized equipment, building materials.

Perforated layouts allow you to save work space, keep the necessary tool always at hand and control its availability. A workshop equipped with such panels will have a modern look, and various working devices will always be at hand.

Perforated sheets are attached to special brackets, and tools are placed on them using holders, shelves and hooks. However, on sale you can find cabinet panels that are mounted without any fasteners.

Perforated sheet sizes:

1. On average, the height of such products is 200 centimeters, and the width is 100 centimeters. Large sheets can be produced for various workshops and garages. Their width can exceed more than two meters.
2. The minimum size of the layout is 50 centimeters wide and 100 centimeters high.
3. The thickness of the chipboard can be up to 7 centimeters, and metal - from 1 millimeter.
4. The perforation diameter is 5 millimeters and the distance between the holes is 15 millimeters. This allows you to fill the panel as tightly as possible and at the same time it is convenient to arrange everything.
5. The pitch between the centers of the hook attachment is 30 millimeters.

However, it must be remembered that the dimensions are calculated according to the overall dimensions of the product, while the working surface itself most often has rather modest dimensions. That is, with a structure height of 150 centimeters, the perforated surface used may account for only 50 or 100 centimeters.

The building materials market offers many different standard sizes of panels, so there is plenty to choose from for arranging any workplace.

The areas of application of perforated layouts are unlimited, however, for each case, you should select product with certain characteristics:

• durable metal structures are well suited for professional workshops;
• small-sized sheets will come in handy in a subsidiary farm or garage;
• multifunctional layouts in the form of screens and modules are widely used in manufacturing and industry;
• products with various additions have found their application in the arrangement of showcases in hardware stores.

Affordable tool storage racks are easy to install and easy to use.

The advantages of metal products:

Most often, perforated panels in two colors... They can be white or natural wood.

The disadvantages of metal layouts include:

1. Mandatory fastening for fixing the sheet of horizontal strips.
2. In comparison with models from MDF, the price is quite high.

Perforated chipboard panels

When choosing layouts from MDF, it should be borne in mind that in conditions of increased use, they are not able to provide adequate wear resistance.

Due to the low strength of the material, products for storing tools are made in small formats. Their standard size is 60x60 centimeters. Such layouts are strong enough do not deform or bend... In addition, they are easy to transport and install at the desired location.

Perforated MDF panels are designed to hold only oversized tools. With their help, you can conveniently place and operate hammers, wrenches, screwdrivers, etc. At the same time, when choosing such products for your workplace, you must remember that at high humidity and high temperatures, their service life will not be long.

Perforated panel fittings

It rarely happens that only a sheet with holes is enough to contain the instrument. Therefore, most often perforated layouts are sold complete with various holders and mounts.

Methods for mounting perforated layouts

The panels can be placed on various surfaces.

Wall Sheets are the most popular type of designs. They are fixed directly to the wall and fixed with special screws. With the help of such layouts, you can save room space and, at the same time, comfortably use the working tool.

Perforated panels for locksmith's workbench are manufactured according to the length of the unit. Their size can be matched to a double-pedestal, single-pedestal or bastumbov workbench. Structures are fastened using special brackets and racks. In addition, two panels can be installed on the workbench at once.

In the middle of the room you can place modular screens or systems... They will also perform the zoning function.

Rear layouts can be conveniently positioned on pipe stands or other suitable profiles.

It is worth noting that the placement of various additional elements depends on where and with what the panel is installed.

Varieties of perforated panels

Layouts with decorative effect

To ensure an aesthetic effect, HDF perforated sheets are produced from solid fiberboard. With their help, you can mask some interior items, and also divide the room into separate zones.

Such designs differ durability and decorativeness... Phenol is not used in their manufacture, so they are environmentally friendly. Wood fiber material is able to cope with damp and any temperature influences, so layouts made from it can be installed in almost any room.

Sometimes it is necessary to move or transfer equipment sheets to another place or room. The most convenient way to do this is with the help of special mobile layouts equipped with casters or wheels.

No matter how large the garage is, the problem of compact placement of all the necessary equipment in the household is always relevant. Storing the instrument on the wall will help in many ways to solve the problem of limited space - so the necessary will be at hand, and useful meters will not be used in vain. By organizing your tool storage system on the wall, you can solve many problems overnight. Each type of repair tackle must be placed separately, this will further facilitate the search for this or that item. Next, let's take a look at the most popular and simple ideas for mounting a tool on a wall.

Organizers from cans for tools on the wall

If you do not throw out canned food cans for a while, then you can build a wonderful organizer for storing tools on the wall with your own hands. Pliers, secateurs, scissors, brushes will be organically and conveniently placed in cans attached to the walls of the garage. This simple idea will allow you to make the most of your workshop space and keep all the tools you need close at hand.

Screwdriver holder

A screwdriver is a very useful item in the household. But finding it becomes a frequent problem, since it is small and invisible. So that all the screwdrivers are at hand, and the efforts regarding the search for the item of the desired model are minimized, you can build a holder. To do this, you just need to drill holes in a wooden block and attach it to the wall.

Shelf with saws for tools

Drills, jigsaws and screwdrivers love order no less than any other household assistant. It is convenient to store them on a shelf with cut holes.

garden tools

How to hang tools on the wall in the garage? No one wants to step on the same rake every day, however, if they lie anywhere in the garage, then this will happen more than once. A smart solution would be to remove them from the aisle and attach them securely to the wall. Holders cut from ordinary PVC pipe can help with this.

Racks with containers

Useful little things are conveniently placed in containers on the shelves. For the construction of the shelving, you can use pallets, perhaps they remained with you after the construction of a garage or house.

Important! If you want the rack to be more mobile, you can attach wheels to it.

Organizer for small parts:

• Small items such as screws, nuts and nails are conveniently stored in bottles or jars made of clear plastic. To save shelf space, containers can be attached to a hanging holder.

Important! It is more profitable to make the attachment point on the container lid.

• Empty cut-off cans can be used to store the same tools.

Important! In order not to look for the necessary parts for a long time, it is better to label the containers.

Storing band saws

It is dangerous to store the saw blades twisted into a ring, as they can cause serious injury or injury while unrolling. Office clips can be used to safely store such tools on the wall. With the help of them, a sharp canvas is fixed, hung on a hook or placed on a shelf.

How convenient to store drills and keys?

Another type of small household utility is various keys and drills. A wall mount for the tool can be made from magnetic tape. This way, the drills will not get lost and will always be in order.

Storage of adhesive tape:

• It is very convenient to store tape or duct tape in a drawer with a metal strip distributor. This way it will be possible to easily tear off the required amount of tape without losing its ends for convenient subsequent use.
• Another convenient method for storing duct tape is with a coat hanger. By cutting the bottom of the hanger, you can hang some duct tape and tape on it. The hanger itself can be hung on a hook driven into the bottom of the shelf.

Almost every man has a toolbox in his home or garage. Therefore, it is worth keeping them in perfect order. How best to do this, a new review will tell. Surely everyone will be able to find in it examples of the organization of storage that interested him.

1. Plastic canisters

Cut canisters are perfect for storing nails, screws, bolts and nuts. And in order not to dig for a long time in search of what is needed, it is better to mark the containers.

2. Wooden shelf

The narrow, perforated wood shelf is a great place to store your screwdrivers.

3. Stand

To prevent pliers from being scattered throughout the garage, make a special wooden stand for them.

4. Railing

A thin metal rod is perfect for hanging paint brushes.

5. Individual cells

From the remains of PVC pipes, you can make convenient cells for safe storage of a small power tool.

6. Wooden shelving

A homemade wooden rack for storing wrenches will allow you to forget about the clutter and tedious search for the right tool forever.

7. Open locker

An open wooden cabinet is perfect for storing aerosol paints, which are often scattered randomly in the garage.

8. Mobile stand

A small stand on wheels is perfect for storing hand tools. Such a rack is very compact and will allow you to always have the right tool at hand.

9. Wooden stand

Stylish wooden stand with shelf that is suitable for storing a variety of different tools. Such a product will not only help to streamline hand tools, but will also become a real decoration of the male monastery.

10. Homemade rack

An unnecessary pallet can be turned into a handy stand for storing garden tools, which often take up a lot of garage space.

11. Hanger

A simple wooden block with metal hooks will permanently solve the problem of storing a power tool.

12. Clothes hangers

Simple manipulations with an ordinary clothes hanger will turn it into a convenient organizer for storing electrical tape and tape.

13. Storage system

Forks, shovels, rakes and other garden tools are not very stable and also take up a lot of space in the garage. Sturdy wooden wall hooks will help you place your garden tools along the walls of your garage or shed.

14. Folding table

A homemade wood folding table and wall mounted hand tool storage rack is a terrific idea for small garage owners.

15. Glass jars

Ordinary glass jars with metal lids are perfect for storing various little things. For greater convenience and reliability, the lids of the cans should be screwed to the shelves.

16. Vertical storage

The average garage looks pretty cluttered. The competent organization of storage systems will help to solve this problem. Instead of another closet, equip the walls with various shelves and hooks that will neatly accommodate a variety of things, from tools to huge boats and bicycles.

17. Magnets

Magnetic tape or individual small magnets are a great idea for storing bits for screwdrivers, drills, and other small metal parts.

In continuation of the topic, we will tell you about anywhere.

Who hasn’t been annoyed when looking for a particular wrench in a drawer in a locksmith's workbench or in a special box, where they are usually located in a chaotic mess? There is an opportunity not to spoil your mood, improve your work culture and not waste time looking for the right tool.
To do this, it is enough to acquire a suitable wooden bar, for processing which you will need some simple tools. The whole work will take about no more than one hour. With this simple yet effective open-end wrench holder, you won't have to curse to find the wrench you need right now.

Required tools

In order for the work to go quickly and not require too much physical effort, I propose the following set of tools (of course, they can be replaced with others, in particular, manual ones, the main thing is the high-quality performance of the corresponding operations):

• electric jigsaw;
• belt sander (grinder);
• benchtop drilling machine;
• mechanical cutter;
• manual screwdriver;
• metal ruler and pencil;
• protractor ruler for drawing oblique parallel lines.

Required materials

For the device to last longer, the timber of the corresponding section must be made of hard wood: birch, oak, maple, ash, elm, etc. You will also need two cambric or plastic inserts and two suitable screws of comparable sizes.
In principle, the open-end wrench holder can be soaked in oil, varnished, or simply painted with any oil paint. This will give them more strength and improve their appearance, which is also important in our aesthetic age.

Manufacturing process

We begin the work with sawing out a blank of the future wrench holder from a wooden beam or thick board suitable for the section and length with an electric jigsaw.

Then we process all the edges of the workpiece on a belt sander, which is also called a grinder. For the back side of the workpiece, this is the final operation, so it must be done with sufficient quality.

Now you can start marking the wooden beam.

To do this, along its narrow side, using a metal ruler and a simple pencil, draw a line in the center along the entire length of the workpiece. Then we make marks on the drawn line every 25 mm at an equal distance. These are the centers of the through holes - the bottom bases of the key sockets.
We drill the holes in the bar one after the other, without missing a single mark, on a benchtop drilling machine. The main thing in this operation is to maintain the verticality and parallelism of all holes in relation to each other.

To make the future device aesthetically pleasing and safe to use, we round off all face edges with a milling head of the corresponding profile, which is driven by an electric motor.

Then, using a protractor-ruler, having previously set the required angle of inclination, draw two parallel tangents to each hole with a pencil along the entire length of the bar.

Next, on an electric jigsaw, we make sequentially cuts to all the holes along the previously marked lines and remove the resulting blocks. Open-end wrench sockets are ready!

It remains to drill small through holes at both ends for hanging the fixture to the wall of the garage or workshop. To do this, in pre-made holes in the wall, we insert cambric or ready-made plastic inserts of the desired section.

All that remains is to match the holes on the fixture and in the wall, and screw the large-headed screws tightly using a hand-held screwdriver. The open-end wrench holder is ready!

It remains only to carefully insert the keys into the formed grooves in a certain sequence: large at the bottom, small at the top. As you can see, the device looks not only functional, but also quite aesthetically pleasing.

Improvements and alternatives

In principle, this key holder can be simply cut out with a small, well-sharpened, hand hacksaw, knocking out the sawn plates with a carpenter's chisel or flat screwdriver with a strong handle. With some care in the work, the required functionality of the product and sufficient aesthetics will be ensured.
Instead of a wooden block, you can use two metal plates, connected to each other from the back side by welding with 2-3 jumpers. The slots can be made using a grinder.
It is easier and more convenient for making key holders to use a rectangular, square and even round pipe or a U-shaped finished profile of the appropriate size. It is possible that the reader of these lines will offer his own version of the adaptation for the keys.