Harmless effective bath cleaner. Safe bathroom cleaners

Everyone wants to have order in their bathroom. But in order to keep it clean, you need to buy detergents and cleaners for the bathroom. Moreover, everyone wants it to be not only cheap, but also of high quality. The surface of the bathroom can deteriorate from products that can scratch it. That is why experts advise buying cleaning products that will be gel or have a liquid composition.

How to choose the right detergent

When choosing a tool, you need to pay attention to a number of recommendations, which are listed below:

It is not necessary to buy a product at a high cost. Since not every product that is expensive is of good quality;
Pay attention to the composition of the product. It must not contain substances hazardous to health;
The bath product should be quickly washed off so that allergic reactions do not appear in case of contact with the skin;
It is more economical to buy a product in a large bottle.

In consistency, it should not be completely liquid. Associated with this is the consumption of liquid for the bathroom. Regardless of the cost, trust only a reliable manufacturer.

In order to make your choice correctly, you can look at the catalog of detergents and cleaning products for the bathroom presented on our website.

You can also find prices for bathroom detergents and cleaning products in the product catalog section.

How to choose the right cleaning agent

There are a lot of manufacturers of detergents. How to choose the one that is right for you. When choosing, pay attention to the following:

The product must be suitable for daily use. It must fight rust and plaque that periodically forms;
It is better if by its composition it is not a dry consistency, but in the form of a gel;
Choose a product that can be used not only for washing the bathtub, but also used in the kitchen and washroom;
It is better if there is no strong chlorine smell;

Please note: if you have an acrylic bathtub installed, then not every product will suit you.

How to clean the bathroom properly

In order for cleaning the bathroom not to cause you trouble, you need to wash it regularly. In this case, you can use the tips:

Moisten the bathroom walls with water;
Apply the product to a soft sponge and distribute it evenly over the surface;
If there are stains, you can rub them with a brush. Be careful not to damage the surface;
The final stage is rinsing with water.

If you want to keep the bathroom clean, use only authorized products.

If the mother-in-law looks askance, maybe this is not a manifestation of her bad character - look into the bathroom, is everything all right there? The bathroom has special requirements for cleaning. Often the bathtub is used not only for its intended purpose: we sometimes wash and wash some things in it, bathe our pets. Active pollution associated with daily use appears in the bath, it must meet hygiene requirements, because we wash ourselves and bathe children in it. The question of how to make the bathtub snow-white is an acute one for any housewife, even if weekly visits by the mother-in-law are not threatened.

What makes the bath dirty?

Let's take a look at the main bathroom troubles, how to deal with it, and the best bathroom cleaners:

Normal pollution. Impurities arising from use - deposits of soap and dead skin, washed away during washing. This is the simplest type of dirt, in most cases, it is enough to rinse after use. Removing dirt while it is fresh is the cheapest way to clean the tub;
Soap bloom. As strange as it may sound, the soap used for washing itself leaves a hard-to-remove plaque that you have to fight from time to time;
Limescale. If the water in your area is hard, you should be familiar with the problem: limescale. By the way, it appears not only in plumbing, dishes and household appliances suffer - washing machines, dishwashers;
Rust deposits. The increased iron content in the water leads to the appearance of another plaque - brown rust spots. Rust also refers to dirt that is difficult to remove, requiring special attention during cleaning and complicating the constant care of the bathroom;
Yellowness. This trouble is associated with worn-out plumbing systems and can also cause many inconveniences - not every store-bought bath detergent is able to effectively deal with this type of pollution;

Fungus and mold.A black-bluish bloom at the corners of the abutment to the walls and in the seams of ceramic tiles, which cannot be washed off, is a mold colony. Not only does it look disgusting, but it is also dangerous to health. The mold we most often encounter can belong to different types, for example, to the species Cladosporium, Ulocladium, Stachybotrys, Alternaria, Penicillium, Phoma, Aspergillus, Chaetomium, Wallemia and others. They have varying degrees of pathogenicity. Alternaria mold belongs to the 4th pathogenicity group and grows well not only on walls, but also in human lungs. Or Aspergillus - 3 group of pathogenicity, is the cause of aspergillosis in humans and animals - numerous diseases caused by inhalation of Aspergillus mold spores. The fight against mold is no longer a question of the beauty of the bathroom, it is a struggle for the health and safety of your loved ones - in addition to cleaning, disinfection is needed;
Old bath. A bathtub with an old, damaged coating is a separate big problem. The question of how to clean an old bath most often worries many housewives;
Bathroom after renovation. It would be better, of course, to reliably cover the bathtub for the duration of the repair, but anything can happen, and sometimes the surface gets smeared with building compounds, a problem arises than to wash the bathtub after repair. Its solution depends on what the builders have stained;
Spilled ink. Even the tidiest person sometimes spills something that has a permanent coloring effect. Knowing how to wash the potassium permanganate from the bath, remove brilliant green, wash off drops of hair dye, or other highly dyeing substance, will not be superfluous.

Removing contaminants of various origins requires the use of various cleaning agents for the bathroom. The variety of materials from which modern bathtubs are made makes this task even more difficult. Let's try to understand the intricacies of such a procedure as cleaning the bath at home.

Cleaning common dirt

In the arsenal of any housewife should be a cleaning agent for the bath. Which of the products offered by modern household chemicals is the best cleaning agent for the bathroom, we will not discuss, because this is a matter of habit, financial capabilities and advertising effectiveness.

If the bathtub is new, to simplify life and maintain the coating for a long time, maintain the surface regularly using your usual bath detergent. After use, dirt can be easily washed off using detergents or bath gel. The method of using the thorough cleaning agent is almost the same:

moisten the surface with water;
apply the product using a soft sponge;
wash off with plenty of water;

Important: Make sure that the chosen bath product does not contain strong acids. The chemical composition of the care product is especially important if you have an acrylic bath, made of artificial or natural stone. And modern cast iron with an enamel coating are not the ones that were familiar to our mothers: the enamel on them is thinner and softer than on the old ones.

Removing soap deposits

We repeat once again - regular plumbing maintenance requires less physical strength, money for daily bath cleaning, and does not require the intervention of heavy chemical artillery, which is an effective bath cleaner, but together with dirt it can take away a beautiful coating. Lather, in combination with hard lime water, dries on the surface to form a hard-to-remove hard coating.

The easiest way to clean your sink or tub is to keep the foam from drying out and turning to stone by rinsing off the foam flakes with water. The way to prevent the appearance of soap plaque is to use liquid soap for washing. Talc is added to solid soap, it is he who settles on the walls. Moreover, not only the bathtub suffers from plaque, but also the tiles on the walls, the chrome surface of the faucets, the sink and other surfaces.

How to remove solid soap deposits from walls and faucets, how to clean the bathroom and how to clean the sink? There are special products on sale for cleaning the bath from soapstone, if you want to know how to clean a bath without chemicals, then there are folk methods. Although, of course, citric acid, soda, vinegar, salt are also chemistry. But many, choosing which agent is better to clean the bath, prefer to do without products from the household chemicals department.

Tip: The easiest way to clean the bathtub at home from soapy deposits is lemon juice. Take natural lemon juice, squeezed from lemon, or dissolve a package of citric acid in a glass of warm water, dilute the natural juice with water 1: 1. The lemon juice solution can be placed in a spray bottle or applied to the surface with a soft sponge, leave for a while, and rinse off with warm water.

This method will not only help to cope with the formed soap deposits, but also solve the problem of how to clean the bathtub to make it shiny.

Cleaning limescale

Hard limescale is inevitable if the water is hard. One way to combat it is to install pre-filters with a water softener cartridge. This will reduce the rate of formation of lime stalactites on the surface of the bathtub and sink, on the walls of household appliances and on the electric kettle.

If limescale has formed, you can use a commercial commercial limescale cleaner or a home remedy to clean it. A good cleaner for a dirty tub is a mixture of baking soda, vinegar, and liquid dishwashing liquid. Take 1/2 cup of baking soda and mix with 1/2 cup of liquid detergent and 1/4 cup of vinegar.

Apply the resulting mixture to the contaminated surface, leave for a while and rinse with water. To clean the delicate surface of acrylic, you should not use soda: although it is soft, it is still an abrasive. You can clean lime from an acrylic surface either with lemon juice, as described above, or with a mixture of ammonia and hydrogen peroxide, taken in equal proportions.

Rusty smudges

To combat the appearance of rust stains, it is also better to use anti-rust agents: pre-filters and working mixers. If the question of which bathroom cleaner is better to use for rust is relevant for you, then when choosing how to clean the bath from rust stains, pay attention to such representatives of household chemicals as "Surzha" and "Cif". They deal with rust stains quite easily. As in all cases of household pollution, there are also methods "from the kitchen cabinet and first aid kit", allowing you to achieve an excellent result. This is already known, soda and citric acid or vinegar.

Tip: You can use mustard to clean an acrylic or stone bathtub. Use homemade, no preservatives. Apply a thick layer of fresh, strong mustard to the rust stain and leave for 9-10 hours. After the specified time has elapsed, moisten a layer of mustard with warm water and rub over the surface, rinse with water.

We fight yellow stains

Old water pipes are the cause of yellow stains. How to wash the bath in this case? The best way is to eliminate the cause, not fight the effect. And the best remedy for cleaning the bath from the yellowness that has appeared is dry bleach diluted with water to a state of gruel. Apply the mixture to the stain and leave to dry, rinse with water. More severe methods can be applied. A solution of hydrochloric acid is sold in hardware stores. Pour the acid onto a soft cotton cloth and wipe the stain.

Remember! It is necessary to work with hydrochloric acid with extreme caution, use rubber gloves. It is necessary to protect the chrome surfaces on the bath itself and the mixer. Chlorine-containing substances cannot be used for cleaning acrylic and natural stone.

What to do when black plaque appears in the corners?

Black plaque growing in the corners of the walls and edge of the tub is mold. It is useless to wage a superficial struggle, and use disinfectants. Mold is a fungus, in addition to the upper, visible part, there is a mycelium, mycelium, which can penetrate deep into the surface of finishing materials. Most often, mold does not affect the surface of the bath itself, but the joints: between the side of the bath and the wall, the seams of the tiles. If mold has settled in your bathroom, it may be worth considering repairing, or at least updating the surfaces where it found its place and ventilation.

Remove the old joint sealant, and you should also clean the tile joints by removing the old grout. Re-grout the tile joints with a new grout, when dry, cover with a special agent that prevents the appearance of fungus, for example, KIILTO CLEAN. When using silicone sealant, select a product that is mold resistant. And most importantly - make supply and exhaust ventilation, which will protect your home from the appearance of mold;

Old bathtub with damaged surface

How do I clean a visibly damaged bathroom? A bath that has served its useful life has all of the above contaminants. Cleaning is complicated by a damaged, rough surface that absorbs dirt like a sponge. Considering that it is difficult to clean an old bathtub, it is equally difficult to keep it clean, even with regular maintenance, the best way is to change it.

For your information: If, out of cost savings, you are thinking about updating an old bathtub by applying a new coating, no significant savings will come out - quality products are expensive, their price is comparable to the cost of a new simple cast-iron bathtub. No other way to quickly renew the surface at home can compare with the strength of the enamel layer applied in the factory.

If the time to replace the bathroom has not yet come, there is a way to clean the old bathtub. To do this, you will need, in addition to baking soda, soda ash. Soda ash, unlike baking soda, is a stronger alkali, with a ph 11. Soda ash is sold in household chemistry departments, you can find it in the laundry powder section. By the way, it softens hard water well.

Mix baking soda and soda ash in a 1: 1 ratio, can be diluted to a slurry with water for ease of application. Using a brush, apply the mixture to the bath surface. Do not be afraid to make significant efforts: this is not an acrylic bathtub, and for the rough enamel of an old bathtub, it will not be worse. Leave the applied composition for 10 minutes.

Mix equal parts vinegar and bleach powder and, without rinsing off the previous soda detergent, top with the vinegar mixture. After thirty minutes, wash off with plenty of water. This method of making the bathtub white is effective, but you may need to repeat the process again, depending on the degree of damage and contamination of the bath. But it should be borne in mind that the damaged enamel will very soon require cleaning again.

We remove traces of repair

So, how and with what to clean the bath after renovation? Try to close the bowl for the duration of even the smallest repair work, then you will not need a product for your bathroom, because some building compounds simply do not wash off the surfaces, for washing others, special solvents may be required, which, together with building dirt, can dissolve and spoil and surface.

And some building materials in themselves are, in addition to pollution, also substances that damage the surface of enamel, acrylic, stone. In order not to think about how to clean the paint from the bath, try to immediately wipe off a drop of paint while it is fresh. Traces of lime mortars are removed with products such as Duty Extra - mortar remover. But it should be used very carefully to clean the surface of the bath;

How to remove traces of various dyes

Potassium permanganate, or potassium permanganate, leaves behind a persistent brown coating that is difficult to clean even from glass. To understand how to clean the bath from potassium permanganate, you will need basic knowledge of chemistry. Brown oxide MnO₂ is oxidized to colorless Mn₂ with a solution of hydrogen peroxide and an acid, for example, the already tested citric acid.

You should not think too much about how to wash the bath from spilled green stuff. A fresh stain can be removed with rubbing alcohol if it is not an acrylic bath. And over time, with normal use and washing, the stain will come off by itself.

Conclusion

A snow-white bath at home is not a luxury, but a necessary guarantee of the truly hygienic procedures carried out in it. And the answer to the question, the better to wash the bathtub, depends on how your bathtub is soiled. In choosing a product, follow our advice and customer reviews. Although, as it turned out, soda and citric acid will help clean the bathtub at home from most of the dirt.

In the spring, not only the body requires renewal and freshness, but also housing \u003d) Therefore, I continue to write about eco-friendly bathroom cleaners that will not harm health.

This year, I went to European cities several times and looked into every health food store I met! It's nice to see the familiar Ecover brands, Natracare hygiene products in Germany and Italy, and at prices more expensive than we buy them.

Therefore, I did not bring safe chemistry from Europe, but i am now collecting a basket on iHerb with household funds, for spring cleaning \u003d)

Bathroom cleaners

Last year, a large-scale audit by the EWG (independent) showed these results for bathroom cleaners. Tested 227 products from 58 popular brands, half fell into category F: the most dangerous for human health and the environment.

Safety was assessed on five points:

asthma / lung toxicity
allergic reactions / skin irritation
reproductive toxicity
carcinogenicity
impact on the environment

I went through the entire list and chose the safest health productswhich you can buy on iHerb. They are not sold in Russia, and no one tests ″ our chemistry ″ for irritation and toxicity.

Bathroom cleaners rating

⇒ ATTITUDE, Daily Shower Cleaner, Citrus Zest (cat. B), daily cleaner for bathrooms, tiles, shower stalls. Certified EcoLogo, Canada's globally recognized environmental standard. I love this brand, I use everything I bought with pleasure.

⇒ Bio Kleen, Bac Out, Bathroom Cleaner (Cat. B), a universal bathroom cleaner with “live enzymes” and citrus fruits, does not require rinsing. Cleans and removes unpleasant odors.

⇒ Bio Kleen, Bac-Out Drain Care, Gel Coating Action (cat. B), clogged waste water cleansing gel with enzyme and live bacteria technology that breaks down organic matter and removes clogs. Cleans and deodorizes drains, prevents clogging.

⇒ Bio Kleen, Soy Toilet Cleaner (Cat. B), a soy scrub for cleaning the toilet, removes stains and impurities, deodorizes with peppermint essential oil. Besides washing toilets, it is suitable for tiles, sinks, bathtubs and showers.

⇒ Ecover, Toilet Cleaner, Pine Fresh(cat. B), plant-based, biodegradable toilet cleaner with a fresh pine scent.

⇒ Method, Daily Shower, Natural Shower Cleaner, Ylang Ylang (cat. B), a daily spray for cleaning shower stalls and bathtubs, prevents soap deposits on tiles and glass, does not require rinsing. Suitable for tiles, glass, fittings.

⇒ Mrs. Meyers Clean Day, Multi-Surface Everyday Cleaner, Basil Scent (cat. B), the all-rounder for daily dirt removal, surface cleaning and freshness. The spray is suitable for: wood, tile floors, countertops, porcelain, sanitary ware, artificial stone and granite. And the smell of basil soothes the nerves \u003d)

⇒ Mrs. Meyers Clean Day, Multi-Surface Concentrate, Lavender Scent (Cat. B), a relaxing lavender scent concentrate is as versatile as the basil above. For daily cleaning, it must be diluted with water, and can be used neat to remove stubborn dirt.

⇒ Mrs. Meyers Clean Day, Toilet Bowl Cleaner, Lavender Scent (Cat. B) Toilet bowl cleaner with lavender and orange essential oils. Removes dirt and unpleasant odors, refreshes surfaces.

⇒ Citra-Solv, Homesolv, CitraDrain, Natural Enzyme Drain Cleaner (Cat. C), a powerful enzymatic clogged drain cleaner, safely unclogs pipes and removes debris, leaving a citrus scent. Safe for all plastic and metal pipes, domestic drains and septic systems. Does not damage water pipes.

⇒ Method, Bathroom Cleaner, Eucalyptus Mint (cat. D), bathroom and tile cleaner. Non-toxic, easily dissolves soap deposits, removes mold and mildew stains. When cleaning, you do not need to pinch your nose and be afraid of poisoning in vapors. Suitable for: shower, tiles, fittings, porcelain and chrome surfaces.

These are the bathroom cleaners. Have you tried something from the list? What "chemistry" do you prefer?

Everyone likes a snow-white, ideal clean bath, but does everyone love and know how to take care of it? It is clear that one cannot do without the best cleaning agent in this business. "Price Expert" has compiled ten of the most effective and popular bath cleaning products among housewives.

How to choose the best bath cleaner?

Experts advise cleaning the bath with a gel or liquid composition, avoiding harsh abrasives and concentrated acids. The composition must be relatively safe, it must cope well with rust stains, lime deposits and soap deposits, while not damaging the surface. Disinfectants in the composition will help get rid of germs and unpleasant odors.

Enamelled bathtubs and acrylic bathtubs require different cleaning compounds:

Enamel bath can damage hard particles and high acid concentrations. To preserve the enamel, use surfactants that form a large amount of foam that literally absorbs dirt. Use of mild abrasives and mild acids is possible. Use more aggressive formulations only in the most exceptional cases and pointwise - in especially contaminated areas.
Acrylic bathtubs consist of a polymer that is easily scratched, absorbs dirt and stains. This means that the perfect appearance and whiteness must be maintained with special fluids and sprays for acrylics and plastics. No cleaning particles (even mild ones), solvents or strong acids. If the packaging does not indicate that the product is suitable for this type of bath, it is better not to use it at all. The same recommendations can be applied to shower cabins with acrylic base and elements.

The bath is the main item in the bathroom of each apartment; it is the place where hygiene procedures, relaxation, washing, and other household operations are performed. To withstand such intensive use results in accelerated wear and heavy soiling.

Therefore, all homeowners are interested in the question of how you can easily clean the bath from plaque, yellowness, especially if it is made of such a capricious material as acrylic. are expensive enough to change every 5 years, so it is more rational to keep the wash container clean and tidy. In this article, we'll show you how to care for an acrylic bathtub to keep it white and shiny throughout its life.

Material characteristic

Acrylic is a modern polymer material from which modern, technologically advanced baths are made. They are lightweight, have low thermal conductivity, high wear resistance and a beautiful glossy sheen. A huge assortment of forms, an inexpensive price and a large size range of acrylic products have become the reason for the huge popularity of these products. Acrylic bathtubs have the following advantages:

Note! Cleaning an acrylic bath and removing limescale, yellowness or other contaminants is a responsible task, the appearance and service life of the product depends on the correct implementation.

Causes of damage

The price of a quality acrylic bathtub is 7-35 thousand rubles, so hardly anyone wants such an expensive purchase to become unusable without proper care after 1-2 years of use. Not knowing how to clean an acrylic bathtub, a homeowner runs the risk of getting a damaged washing container after a few months of operation, suffering from limescale, yellowness and dirt. To make cleaning an acrylic bath easier, the following manufacturer's recommendations must be followed:

Important! It is important for homeowners to understand how to care for an acrylic bathtub to protect the product from limescale, stubborn dirt and yellowness. To clean the product if the wash container turns yellow, you can use a special mild cleaning agent with a foamy consistency. The use of abrasive products will cause scratches. Small fresh dirt can be washed off with plain water and a soft sponge.

Washing methods

Acrylic bathtub owners often wonder what to do to keep it from turning yellow, and how to avoid limescale build-up. Acrylic is a dirt-repellent material that needs a little maintenance if you know how to clean an acrylic bath to keep it looking.

To keep the acrylic bathroom clean, rinse it with running water after each use without using a cleaning agent. To dry the container, you can wipe it with a soft absorbent cloth to protect it from plaque and yellowness.
Once a week, you need to wash the product using acrylic bath cleaner to clean it from rust, stubborn dirt, plaque and yellowness. The product is foamed and then applied to the bath with a soft sponge. For it to work, it is left on the surface for 10-15 minutes and washed off with plenty of running warm water.
If small cracks or scratches appear on the surface of the acrylic, they are removed by grinding with fine-grained sandpaper. In order to return the shine to the material after processing with sandpaper, a special polish is applied.

Manufacturers state that the most common reasons for the loss of attractive appearance and gloss of acrylic products are poor quality running water, as well as the use of abrasive, strong or aggressive cleaning agents.

Detergents

What to do to maintain the appearance, whiteness and gloss of an acrylic bathtub? The answer is simple - rinse the product with running water after each use, and also regularly clean it with special products. ... If you do not know how to clean an acrylic bathtub, you can use the manufacturer's recommendations. They recommend using the following brands:

Please note! When deciding what means to wash an acrylic bathtub, refuse to use strong, aggressive brands, which include acids, ammonia, solvents, acetone, alkalis.

In addition, apply the detergent only with a soft sponge; it is highly discouraged to use brushes, as they leave scratches on the surface of the material, into which dirt is subsequently clogged. Before washing the acrylic bath, make sure that the product does not contain abrasive particles, which also injure this delicate material.