Drainage system around the house. Features of the drainage system around the house: species, functions, phased performance

Interior design will not have a complete view without a comfortable, reliable and aesthetic door design.

Slopes from MDF will allow the interior of the completion. But it should be noted that the installation provides compliance with the recommendations and norms that contribute to the achievement of the durability of the structure.

Advantages of building materials

The doorway finish is a time-consuming process that requires accuracy and following advice. Consequently, to make this kind of trim is possible personally. Sucks can be separated by panel materials whose variety can satisfy any requests. Often, finishing works are made by plastic, wooden panels, plasterboard, but the MDF panels are considered the most successful.

Since this finishing building material has numerous advantages:

Availability of material.
Easy installation.
Aesthetic appearance.
The density of the material creates an additional sound - and thermal insulation.
Ecology. Warfather plate is made by the method of pressing wood chips under the influence of temperature and pressure. In the core of binders of fibrous material, carbide resins are used, which are harmless to humans. Consequently, the MDF refers to the environmental building material, which may be safely used for cladding both outdoor and interior structures.
The color palette allows you to satisfy any requests. You can choose the coloring of the panels from the wenge to bright shades.

But both of any building materials, MDF panels are not devoid of flaws:

Weak resistance to mechanical damage. When deforming the MDF panel damage is not subject to restoration.
It does not withstand significant moisture indicators.

Consequently, the decoration of the door slut panels of the MDF should not be made in conditions of high humidity.

Sleeps input door from MDF do-it-yourself (video)

Preparatory moments

All the advantages that the outer doors can be facing the MDF panels can be shown during the installation. Consequently, before starting work, you can explore the video, exactly how the slopes are doing at the entrance door. Warm panels are 2 options:

Designed for finishing works (possess a M-shaped form).
Wall panels.

Most novice masters have a completely natural question, how to strip the slopes of the MDF input door correctly. To begin with, it is necessary to make detail. To make the door sluts from the MDF, you need to remove the size of the opening that should be portrayed on paper. According to transferred data, each element should be shown schematically. It is recommended to consider moments:

The presence of the thoring.
The procedure for placing parts.
Width of the opening and angles of inclination.

After installing the door, all the slots between the wall and the box should be seen by foam. After frozen the foam, all excess should be cut off.

Installation of slopes frame

Sucks from fibrous panels can be made frame and adhesive method. Installation of slopes from MDF panels with their own hands in the framework of the following technology:

At the edges of the slope of both pitched and the outside, with the help of a dowel, fix the wooden slats, which you need to close the MDF panels over time. Brussia should be aligned by level. To avoid skewing the design between the skeleton and the opening you need to score wedges.
From the MDF to cut 3 sheets (2 for vertical mounting and 1 - horizontal).
Details should be attached to the impeller and outline dots for cutting.
The trimming should be made strictly in the magnitude of the door hole.

To the inner edge of the panel of the panels, we apply liquid nails and attach to the frame.
Panels should be aligned so as to achieve a minimum gap between them.
The fixation can be strengthened using self-tapping screws that screw in the upper and lower part. Self-tapping caps are decorated with special elements.
The final moment is the fastening of platbands.

If the depth of the opening does not exceed the width of the MDF, then in this case it is possible to fix it in a seamless method by setting vertically.

Installation of slopes with adhesive way

If preference is given to the adhesive method, then in this case you should familiarize yourself with the tips on installing the entrance door and discovery of MDF. Algorithm works of work:

First of all, for the adhesive method, you need to plaster slopes .
Prepared surface is recommended to treat primer. After the priming of the surface, you need to wait until a complete burden.
Install beacon profiles by level. To install profiles on the slopes, the solution should be applied and align the beams by level in all directions. Give time to the solution to grab.
The solution is applied to the slope and aligns the beaches with a spatula. After the manipulations produced, the slopes should be left for 2 days until the solution is completely sealing.
The inner side of the part is covered with glue and gripped to the surface.
When all the elements are set to the formed joints are embarrassed or covered with lining.

Important! After performing all manipulations, you can move to the outer finish of the door design. For this purpose, the surface is possible to bind with platbands or align the surface with a putty. On the expanses of Runet there are photos, video and reviews that describe in detail the entire step-by-step process of the frame and adhesive method.

How to bend MDF.

Sometimes it becomes necessary to separate the elements of a round or semi-alone configuration to be separated by trimmed sheets. Naturally, the question arises how to flexing the material and is it possible. It should be noted that bend the MDF is possible, subject to the use of thin panels (the average should not exceed 3 mm).

To heat the panel, the following actions should be made:

Production of the workpiece from the fiberboard.
Produce a sheet of sheet across the bend.
Cut pieces of MDF of the necessary dimensions.
On the seeds of the folding of the line with an interval of 5 mm. It must be 1 mm.
The resulting chips must be assembled and mixed with glue to the formation of a casczyce mixture, which the holes are filled.
Share the MDF sheet on the template and fix it with nails. Nails do not need to drive deep, for ease of elimination.
The last stage is the removal of the workpiece, grinding and painting.

Following the recommendations, it is possible without effortless to sow units of MDF panels or other construction materials independently. To do all the manipulations of the personally able to everyone, despite the fact that the decoration of slopes in such material as MDF is a painstaking and time-consuming process.

Photo gallery of finished work

From this article, you will learn about the most popular way to separate the slopes of interroom doors without flaws in practicality and durability. We offer a detailed scheme of installation of slopes from door MDFs. You will also learn the rules for the appropriate preparation of the opening and installation of doors.

Each professional builder over time takes more technical solutions that are perfect in all respects. The dispute about the most acceptable embodiment of the door slopes and portals can be considered closed, the optimal method is already found and is practiced increasingly.

Surprisingly, the installation of slopes from the MDF does not require professional participation, it is quite easy to perform with domestic masters using a set of simplest tools: an electric bike, a syringe gun and a mounting knife. Among other things, you will need: roulette, square and pencil, as well as brush-maclove. For proper and durable decorations, the appropriate preparation of openings and compliance with the rules of installation of door frames will be required.

Road installation rules

The assembly of the door frame is performed on non-permanent self-pressing, the upper segment is always located on top of the side racks, and not between them. After assembling the box, it is necessary to cut off the boundaries of the crossbar of the boring excessive, so that the installation grooves is continuous for all three sides.

The only win-win version of the interior door fastening is the technique of direct installation by frame anchors 8x120 mm in the amount of three pieces for hinged and two pieces for the auto side of the box. When attaching to the "dry" partitions, anchors are replaced with screw brazed.

After fixing, the box must be adjusted for the bends, then the technological seam is filled with the mounting foam with the opposite side. The door after filling the seam must be kept closed about 40 minutes, paving remote plates according to the approach. After the polymerization of foam, the adjustment wedges need to be removed and made formed cavities.

Preparation of the opening before installing

Operactions in brick or concrete partitions even before installing doors should be plastered along two guide boards, nailed to the opposite walls. At this stage, the desired deposit angle and the installation dimensions are set. Each line of opening should have a uniform SCOS from 3.5 to 15 °. The opening itself should be 100 mm wider and 60 mm above the door block web.

After installing the door, clean the installation groove is performed from the mounting foam, the segment of the door diet is performed. If, with a plank plant in the installation groove, the thickness of the slit is more than 3 mm, it is desirable to apply an aligning layer for tile glue to plaster. The installation grooves should periodically obey, after drying, the surface must be impregnated with adhesive primer twice.

Marking and trotting

The finishing of the slopes of interroom doors with DOWERS from MDF does not apply to dusty works, so it is better to perform it after finishing finishing works in the rooms so that it is possible to immediately install the platbands.

The standard width of the problem is 90, 120, 170 and 380 mm. If the width of the slope is greater than the available sizes, two or three parallel boards go on it. In the case of telescopic badges that have a puzzle profile, you will have a wide number of slots, but no gaps on the junctions of the door block will not be guaranteed. And yet, the telescopic badges is better to increase the door blocks in the "dry" partitions with narrow slopes.

First places and cut the upper crossbar. To do this, on the floor right under the door you need to decompose the parallel number of boards with the back side. Measure the width of the upper face of the opening at opposite points. Mark it on the back of the boards with the condition that the line of longitudinal cutting of ordinary sobers is facing the doorway, and telescopic - to platbands. Measure the length of the upper slope in the wide and narrow part, set the exact difference on each side. Transfer the markup on the blanks with an indent from the angles of 5 mm and number the boards in the installation order.

Vertical dobors are measured and installed after fixing the upper crossbar. According to the carbon attached to the doorway, the difference is installed in height, the size obtained is transferred to markup. Boards side slopes It is advisable to do 1-2 mm longer to make it possible to accurately fit the detail of the emery bar.

How to install and what glue

Slopes from the MDFs are allowed to be attached to liquid nails or mounting foam. When using foam, you can not build up the plaster for a more dense fit, but it requires a professional approach. The choice in favor of glue should be done with the thickness of the gap between the MDF panel and the plaster up to 5 mm, the foam is used to fill thicker seams.

Boards on the slopes are glued along the rows, ranging from the door frame. First, the cropped parts are trying and visually notice the level of inclination. Then, a glue or mounting foam is applied to the back of the board, 15-20 mm from the cropped edge into the adhesive composition are segments of the cork tree or other elastic material, in the thickness of approximately equal to the adhesive seam after drying. These mortgages perform the role of support points: To make the board in the groove the board as close as possible, sufficiently press the edge slightly.

The upper slope is frozen first, the boards are temporarily fixed by repair. The common plane is enough to simply remove the carbon, but for this you need to set the right direction of the first plan. After setting the crossbar, parts for vertical faces are embroidered. They are also trying to first "dry", configuring the dimensions and a slice for a dense adjoining. After gluing, each plank is proposed on the floor and presses up, the allowable gap between the slope and the flooring is 2-3 mm.

How to cut and install the platbands

After installing the good and pouring the glue, it is necessary to close the ends of the slopes and the foam seam by platbands. The method of their attachment for various shapes of the profile of the box and sobers may differ.

Telescopic platbands are installed by the comb in the grooves of the box or the dough, the mount can be reinforced with concentrated PVA liner or liquid nails. It is possible to install such platbands only after complete solidification of glue or foam on dogs, otherwise their separation is possible.

Smooth platbands are attached to a soft furniture cloves with anodized coating and without hats. Installing them is possible already 1-2 hours after installing the good.

Cut the platbands only with a stouch or cutting saw. As for the corner of the cable, then under 45 ° fasteners with a semicircular form of the front surface, and rectangular cuts off strictly perpendicularly. In this case, the circuit of the platband is formed according to the scheme opposite to the assembly of door boxes: two vertical racks and crossbar between them. Thus, sections of sections will not be visible, as they are turned up.

After installing the window adjacent to the wall () look not aesthetic. You can correct the situation by separating the window by opening the panels from MDF. This material is used quite often for and door. In the article, let's talk about the main advantages and disadvantages of the MDF panels, available varieties, and most importantly describe the entire process of finishing the slopes with their help.

The MDF panels have their own distinctive features in comparison with panels from, and. Among the main advantages can be allocated:

A variety of colors presented in the construction market.
Availability of material.
Attractive appearance.
The density of the material that creates additional sound and thermal insulation.
Ease of material, and therefore a slight load on the surface and simplicity of transportation.
Easy installation.

In addition to the above advantages, the ecology of this material should be noted. The MDF panels are manufactured by pressing wood chips under the influence of high temperatures and pressure. Carbide resins are used as the binder component, absolutely harmless to the environment. In addition, the MDF panels are not affected by the light, they do not fade. Among the negative characteristics of this material should be mentioned:

Easily break and cannot be restored.
It is not opposed to high humidity indicators, which means their installation can only be carried out in dry rooms.

Types of panels for finishing windows

Depending on the method of manufacture, there are several types of panels:

All-paced- Produced by the pressing of wood chips mixed with carbide resins. The surface of such panels is smooth on both sides. Different with high strength and acceptable price.
Laminated - Produced in a similar way as combined, but the lamination process is undergoing at the final stage. On such panels there is a special protective film that allows you to maintain the quality of the material. The color palette of laminated panels is quite wide.
Moisture-resistant - Excellent option for finishing window slopes, as well as surfaces that may be subject to high humidity. We are manufactured without adding chemical components under the influence of temperatures and have high strength.

How to do yourself?

Compared to other finishing materials, the discharge finish of the MDF panels requires enough time and time. Warm plates require the presence of both theoretical knowledge and practice. But the final result is worth it - the slopes from MDF look great in any interior.

Tools and materials

Attention

Buy and prepare all the necessary materials and work tools should be in advance.

In addition to the MDF panels, you will need:

Building level.
Roulette and pencil.
Screwdriver.
Electrolzik.
Mounting foam.
Special construction stapler.
Metal profiles and appropriate fasteners.

Preparation of opening

Before installing panels, you should carefully prepare the window opening. The surface for the subsequent installation should be perfectly smooth, but it is extremely difficult to achieve this. Because most often the material is fixed on wooden bars. Preparation of opening to the installation is made as follows:

Old finishing materials are removed, the surface is cleaned of the construction dust and garbage.
If there are cracks or cracks on the window, they are shuffled with epoxy or cement mortar.
The opening is treated with anti-grapple solution (you can use the "Antiplebra" spray).
Prepare a frame of wooden bars and also to process it with an antiseptic.
Install bars using a construction level, and secure them with a dowel with a plastic sleeve.

How to mount?

The installation of slopes can be carried out in two ways - the MDF panels can be attached to a wooden frame or directly to the surface of the slopes with the help of glue or mounting foam. Let us consider in more detail both ways to separate window openings with their own hands.

Installation of carcass

Installation of slopes from MDF panels framework allows you to perform work most quickly. Installation is carried out as follows:

A starting profile is fastened all over the perimeter of the window. The material is fixed with self-tapping screws.
Wooden rails are installed on another edge of the window.
Pre-harvested on the size of the MDF panel is installed in the profile and fixes on a wooden rail.
At the end, platbands are installed. F-profile is used for them.

Formed voids will need to be elapsed or.

Adhesive way

This method can be considered more simplified in comparison with the previous one. For gluing panels, special glue either mounting foam. All work is carried out in stages:

Window opening should be cleaned from the surplus of foam and other contaminants.
The surface of the slopes should be sharpened and aligned.
The necessary measurements are removed and the panel is prepared.
A glue or foam is applied to each carved element.
Each fragment is first pressed against the surface and smooth and only after 2 minutes fixed finally. It is done so that there is no unnecessary air, overlap or foam between the panel and the window slope.
Internal angles are wicked by sealant, the external is lined with a plastic corner.

Thus, the adhesive method requires a minimum of effort and time, and the final result is similar to the previous one.

Installing platbands: how to glue corners?

Installing platbands - the final stage of all work. You can purchase ready-made corners from MDF when buying the panels themselves. As a rule, they are sold with them and easily pick them up in color and size. Prints for windows perform 2 main functions - protection of the mounting seam from destruction and giving the complete type of construction. Tubes are attached to the surface in two ways:

via ;
with the help of "liquid nails".

How to bend panels?

When it is planned to finish the elements of a rounded form, the question arises how to properly bend the MDF panels. You can only do this in the event that thin panels are selected for installation - no more than 3 mm thick.

The procedure will be as follows:

It will be necessary to make a blank from the fiberboard and produce notches of the sheet across the bend.
Cut pieces MDF suitable size.
Where it is planned to make a fold, draw dotted lines with an interval of 5 mm. It must be 1 mm.
From the construction chips, you need to make a mixture, mixing it with glue and fill it with existing holes.
List MDF lay out on the template and secure nails. At the same time, nails need to be driven over only superficially for further elimination.
At the end, it should be removed the workpiece from the fiberboard, pollute the panels and paint.

Thus, the above recommendations will become a good theoretical basis for self finishing with the help of MDF panels. As we see, this is a rather complicated process, however, by following the task of once, you can easily repeat all actions again. In addition, having fulfilled all the work independently, you can save your budget for hiring workers.

In contact with

Door slips from MDF are the element of the finish that gives the design a finished view. Manufacturing and installation of products can be performed independently, if there are basic carpentry skills and the necessary tool.

Most often, finishing slopes input door panels MDF, since this material has the following advantages:

Excellent appearance. The material is suitable for any style and is combined with almost any interior. Harmoniously combined with furniture.
Availability. Panels have a low price, they can be purchased in many stores selling decorative materials. Furnitura is also inexpensive.
Easy installation. If you need the necessary tools and skills to work with a tree, you can make a slope from the panels with your own hands.
Additionally insulates and isolates the room.
Exterior finish from MDF is an environmentally friendly material, safe for people.
For the children's room there are panels made of wooden plugs.

The disadvantages include features:

The material is deformed and destroyed under the influence of moisture. This should be taken into account when installing slopes in the bathrooms.
Average damage resistance. MDF panels are able to withstand minor mechanical damage due to high density. However, the material is easy to scratch and damage the protective layer.
Sometimes there are problems with the selection of some elements.

Finishing of door slope panels MDF

For the finishing of door slut panels, MDF will not need special tools and special efforts. Allocate the following steps of work:

surface preparation;
insulation opening;
shuttlefishing;
marking and sawing MDF;
installation of panels;
installing platbands.

Everything can be done with your own hands. To do this, you will need such tools and materials:

putty knife;
a hammer;
dowels;
self-tapping screw;
drill;
screwdriver;
ruler and pencil;
plumb;
building level;
mounting foam;
cement mortar;
wooden rails.

Preparation and insulation of the doorway

At the preparation stage, the surface is cleaned of dirt and dust, remove all protruding items, close the cracks, slots. If there are large damage, the coating must be removed to the base. When there are slopes for the entrance doors, you should be careful not to damage the wires that are often allowed next to the louting.

If the old coating is disassembly, the surface is plastered. For this, the cement-sand mixture is used. The next stage is transmitted only after the solution is completely frozen. Thermal insulating material is placed on top. On this, the preparation of the opening to install the slopes is completed.

Outcasting

If the old coating has not been deleted, it is necessary to align the surface and make the discarded at the necessary angle. It is necessary to perform a qualitatively work, since otherwise drafts can occur in the room, heat loss and so on. To do this, make a cement-sand mixture. Align the surface with a wooden rail or rule.

Preparation of MDF fragments for slopes

First remove all the sizes and transfer them to paper. Relative to the data obtained mark the markup of each element of the slope. It should be considered:

presence or absence of a threshold;
in what sequence are parts;
width of the opening and angles of inclination.

Installation of panels

Now you can start installing panels. You can do this in two methods. When the width of the opening is small and fasten one-piece parts, fragments are fixed with glue. Frequently used materials in this case are liquid nails and mounting foam. When the trim needs to be shown, set the crate. With the help of self-samples, the mounting of each element is carried out.

The second option is inconvenient by the fact that there is a need to score wooden bars into the wall. This creates an additional load and destroys the surface. Therefore, it is better to choose MDF in sheets, because you can cut fragments of any size.

Installation of trimming

After the installation of slopes go to the installation of platbands. They are the final and easiest stage of work. It is easiest to attach platbands with nails with a flat hat. So you can achieve high quality fixation, and if necessary, it is also easy to dismantle all the elements.

Nails with a length of about 4 cm are clogged every 40-45 cm. Pre-drill holes of the corresponding diameter so as not to damage the material.

After installing the entrance doors, the joy of replacement can darken a bare wall with mounting nodes, which still needs a subsequent finish. The most optimal option is the sealing of the slopes of the input door of the MDF panels, which have an affordable cost and occupy less time than plaster or other methods. If there is a hacksaw, an electric lobby, a grinding machine and a canister with foam, then you can perform work with your own hands

Advantages of sealing MDF

The installation of slopes from the MDF is available at the price of most buyers, and the color scheme allows you to choose the design corresponding to the doorway and style in the hallway, so most of those who have installed new doors, prefer the opening finish of the opening of this material. Still kind of MDF are allocated by the following advantages:

the material isolates the opening from noise and cold;
well tolerate bears of moderate power and resistant damage;
the decorative layer contains a pattern that simulates a natural tree, which looks very rich and gives comfort in the hallway;
easy installation that does not require a perforator or ability to handle a drill.

Preparation before decoration of slopes

In order for the sealing of slopes to be qualitatively important to correctly process the walls that will remain under them, otherwise there may be fungus or from there will be cold. After installation, there are many small dust and garbage in the opening, so it is necessary to carefully clean it. To prevent the formation of damp and mold, the wall is recommended to be treated with antiseptic impregnation. Next, the surface is ground.

If, after installation, small gaps remained, which missed the installers, then they need to be seeded with a canister from the canopy, so that the cold air does not come from the inside. When the material is freezing, it will be necessary to trim in the end, so that when finishing the slopes of the inlet door, the MDF panels do not persist in the foam, which will not allow you to adjust the wooden lining on the box.

The preparation includes cutting panels of the desired size. Typically use material with a thickness of 8-12 mm. It is possible to place it vertically or horizontally. The first option allows you to quickly close the large area, so more often stopped on it. For cutting, an electrolybiz is used, but it is important to provide an absolutely smooth line of cut. If there are no such skills, it is better to order a cut in a joiner's workshop. The width of the panels is desirable such to completely overlap the distance from the box to the angle of the wall. The second set is harvested for wrapping an angle (platband) and its width is considered to be 7 cm.

Stages of sealing of slopes with MDF panels

When everything is ready to start mounting. The work is performed at the following steps:

It all starts with the top plank. Pre-on the wall at the top of the opening are applied to the mortgage stains of the foam. Their diameter is 5-8 cm, and the height depends on the remoteness of the wall from the start of the size of the box. Ideally, to make the incoming input door from the MDF, it is necessary that the panel is flush with a box or even slightly lower.
The cut cover is attached to the place of the desired height. Between it and the wall will be a gap. It is tested by painting scotch and then adjust the position in the level. From the bottom, the bar is propheted by the T-shaped wooden strut.
Now you can start the spout of the gun inside and suck more foam for better fixation, but it is necessary to act neatly so as not to squeeze the material outward.
By the same principle, the side panels are installed on the tubercles with foam, only to cut them will be required by pieces of a bar tied with a tape to the box to exclude the curved form of MDF.

After closing the inner wall of the opening, you need to create a beautiful transition to the outer side. To do this, use the second set of chopped strips of 7 cm wide. But before fixing, it is necessary to cut the end of the panel under 45 degrees to get the right joint with the top jumper. For such trimming, it is measured 7 cm in length from the edge and carry out a solid line to the angle, according to which the cut is carried out. This is performed on the right and left panels in the mirror image. The cropped edge is polished for a neat species, but it should not be too low to the outer surface so as not to remove the decorative layer.

The panels are attached to the mounting foam and are fixed by painting tape to the wall and door canvase. At the bottom of their length, it is performed before the plinth, if it is already there, or until the floor, and the plinth is already hardened from the lining. The installation of slopes from MDF to the inlet door ends with a plastic corner with a shelf of 15 mm on the angle of the wall around the perimeter, which is permitted only after drying the foam holding the main design, and removing the tape. The color of the closing junction of the element is selected by identical MDF, which will look holistic and beautiful.

The online store "The right choice" offers not only to competently install the metal door, but also close the slopes with the MDF panels, which will completely eliminate the owners from final finishing work. Installation of goods starts from 800 rubles. And there is a large selection of color and thickness of the panels. Installing a whole portal is possible. Learn the deadlines and finishing options are conveniently through feedback.