How to make an Iron Man paper mask: detailed description. Practical instructions: how to make an iron man suit, valuable recommendations, simple master classes Iron man paper helmet

All children love to transform into fairy-tale heroes. They play their first acting roles already in kindergarten. Of course, every girl dreams of becoming a wonderful princess, and a boy's dreams are a brave knight. But if for the transformation of the baby it will be enough to buy a beautiful and long dress, then in order to "equip" a warrior into battle, you will need a special costume and accessories. The first and, perhaps, the main attribute of all knightly uniforms is the headdress. So, you want to make the little boy an original carnival costume in a modern way? Then check out one of the many ways to make an iron man helmet. The instructions are given in the form of a step-by-step guide with comments.

What and how to make an iron man helmet: preparation

Before starting work, you need to decide on a few points:

• for what purpose it is planned to make a headdress;
• what the future product will look like;
• what will be its technological and functional characteristics.

If you plan to make part of the costume, for example, for a New Year's party, do not over complicate the work. It makes sense to simplify as much as possible the functionality of the helmet and its manufacturing technology. In the case of designing this main component of a superhero costume (photo 1), a completely different approach is needed to participate, for example, in an exhibition of works by senior schoolchildren. Here, both the appearance and its manufacturability will be of particular importance. This instruction: "How to make an iron man's helmet" is presented in the form of a description of the initial stages. Plan further work depending on the desired result, using various raw materials and technologies.

Necessary materials

Use a fairly thick landscape paper or Whatman paper to make your pattern, and draw lines with a pencil. For cutting, you will need a clerical knife, ordinary scissors and small ones, such as manicure ones (for neatly decorating the corners and recesses). For a simplified version of the helmet, use corrugated cardboard (a store box for groceries, cosmetics, etc.). Connect all parts with strong and quick-drying glue ("Moment" type) manually or using a special gun. For external design (covering parts and their fastening), you will need adhesive tape of various colors. The reamer of the iron man's helmet can also be made from a less dense material. This option is used if you plan to plaster parts and their further connection to each other, for example, with magnets.

Assembling the template

Photo 2 shows the drawings of the iron man's helmet. Parts of the pattern will, when connected, be located on the following parts of the head:

1. Ear.
2. Parietal.
3. Back.
4. Chin-buccal.
5. Nasal.
6. Frontal.

Knowing this condition, the parts cut out of paper will be easy to assemble into a single product. Photo 1 of the finished helmet will help to distinguish the details, since almost all areas are colored differently and have clear connecting boundaries with each other. But still, before joining the product into a single whole, arrange the parts over a wide space and outline the bonding points.

We make an iron man helmet from paper or cardboard

In order for this headdress to turn out to be voluminous, you need to skillfully arrange the connecting joints. To do this, especially in areas of curved lines, make small cuts that will help to give them a convex shape when gluing. Photo 3 clearly demonstrates this stage of work. After assembling all the parts together, tape them with tape of different colors. You can also use colored paper for decoration, which must then be covered with transparent adhesive tape. Give your child the opportunity to fantasize by creating a creative creation with a contemporary theme.

Application of complex technologies

Photo 4 shows how to make an iron man's helmet from thick paper (whatman paper). If you cover the assembled product on top with a thin layer of gypsum mixture and let it dry, you can get blanks for a more technologically advanced model. In this case, in the process of work, you need to think about how all removable or sliding parts will be connected to each other. The simplest and most suitable option with this technology is the use of magnets fixed inside. It is also possible to install rotating hinges in the cheek and chin area to make the front parts move. Outwardly, such a modern helmet can turn out to be especially attractive due to the use of a special luminous emulsion when painting. Well, the final stage of the work will be the installation of mini-bulbs inside the craft in the frontal region to illuminate the eye recesses. That's all, the helmet is ready!

This original craft can serve as a basis for creating similar headdresses for other fairytale heroes. Create, embodying the most unusual fantasies into reality!

Nowadays, on the screens of cinemas and TVs, you can very often see various superheroes wearing colorful and interesting costumes. And it is not surprising that modern children are very fond of these characters and want to be like them. When various masquerade parties are held, the child always wants to go there in the costume of his favorite movie comic book character.

But a professional suit costs a lot of money, it is not always possible to purchase one for a child. But do not be upset about this, since such a suit can be made on your own at home.

Tony Stark's popularity

One of the most popular superheroes is Tony Stark. walking on TV screens in a highly modern and technologically advanced iron suit that is not afraid even of tank shots. Of course, an armored suit cannot be made at home, but it is quite possible to create an outfit that is similar in appearance at home.

At such moments, they begin to wonder how to make Iron Man on their own. If you decide to make a costume, then you can choose several ways. And you will have to choose this path on your own, taking into account the time, opportunities, and also the wishes of the child. But you need to remember that the costume should be made very light so that the child can easily move around in it.

To make a simple version of the suit, you need to purchase regular red pajamas. You can also use a long-sleeved jersey and red sweatpants.

Necessary materials:

• pajamas or red pants and a T-shirt;
• brushes;
• black and yellow paint on fabric;
• small flashlight (keychain).

Once all the necessary materials are collected, you can proceed to making a fancy dress for the child.

Manufacturing:

The suit is ready. This is also a great New Year's version of the costume..

The second version of the outfit for the child

This option will be more difficult, and it will take longer to tinker with it. To make Ironman's outfit, you will need: yellow and red cardboard, scissors, good glue.

Manufacturing process:

The suit is ready. Gloves can be used in regular red, and if desired, there is an option to attach pieces of red cardboard to them.

Suit for an adult

Recently, adults are also fond of making various costumes from films. To do this, you can use a special program called Pepakura. Ironman's suit drawings are very easy to find, just enter the required request on the Internet. When we have downloaded the drawings for the program, open and print all the sheets. If there is no printer at home, then all files can be easily transferred to a USB flash drive, and then printed anywhere with the necessary equipment. But it is worth noting that ordinary paper will not work; you need to use cardboard sheets, which are more durable.

Necessary materials:

Using the Pepakura technique

Pepakura - modeling various paper shapes... In our country, so far this technique is only gaining popularity, but abroad it already has many admirers.

So, let's begin:

1. When the sheets are printed, we cut out absolutely all the details along the lines. This shouldn't be difficult. Once the parts are cut, you need to find the fold lines and draw along them with a ballpoint pen so that they fold well. This should not be difficult either, because if you open the Pepakura program with the drawings installed, you can see the places that need to be bent (you can also change the dimensions there). They will be indicated by dashed lines in the printed drawing. And it is also very convenient that everything will be numbered there, and you just need to connect all the objects cut in a certain sequence by numbers. We use good glue for this.
2. We connect all parts of the drawing until the components of the suit are completely glued together. When the parts are ready, you need to use fiberglass or fiberglass, as well as epoxy glue. On the back of the suit we glue the cardboard very well with glue, and then we put 1 or 2 layers of fiberglass there. The result should be a very hard piece that will not lose its shape even if it accidentally falls.
3. This process will be very lengthy, and therefore you should be patient. It is better to do all work with glue on the balcony or in the open air, since the smell from the epoxy composition will be very unpleasant and will cause a lot of trouble to households. Until the stage of grinding has come, it is necessary to try on all the details and adjust for yourself, if there is such a need.
4. After strengthening, you need to let the parts dry. Make sure all the components are solid. Now we use ordinary plaster or plaster for cars. To begin with, you can use a construction one, and in the last layer after polishing, apply an automobile one to give additional strength to the product. Begin to apply the plaster to the parts of the suit in several thin layers. Expect each layer to dry well.
5. Now we use very fine sandpaper and sand all the components. There should be no ugly corners or bulges. All sanding work is also best done outdoors, because if you do it inside the house, soon all furniture and carpets will be covered with dust.
6. When all the material has been sanded, you can take the automotive filler and apply the final layer with it. Wait for it to dry, then reapply sandpaper. Make sure all the details are even.
7. You can proceed to painting. For this, it is advisable to use red as well as yellow paint in spray cans. The color is selected in such a way that it is similar to that of Ironman.
8. The Tony Stark reactor on this suit will be much easier to make than on the children's one. To do this, just buy a small strip of LEDs and attach a switch with a battery to it. All this must be attached with glue to the hole that is specially installed on the bib. Cover the top of the reactor with transparent white plastic, which can be obtained by cutting a large container for water. Any hardware store has one.
9. The stage of assembling the suit has come. In order to fasten all the elements, it is necessary to use special tapes that can be bought on the Internet. They are sold in large reels. These tapes are often seen on bags sold for guys. It is these ribbons that they throw over their shoulders. And you will also need a lot of fastexes. These are the connecting elements that help hold the two parts of the suit together. Fasteks are attached to the tapes. And the tapes themselves must be attached between the parts with good glue. The suit should not be too heavy, and therefore it is quite possible to put it on glue, and the parts should not come off.

Very often people practicing pepakura are faced with the question of whether how to make an iron man hand, or rather, the junction. Everyone wants to see not an ordinary fabric in the folds. For this, corrugated hoses are used, which are cut and inserted into the right places.

And also many questions arise about how to make an iron man's helmet. A model is made of paper, after which all the details can be molded from plaster. But with the radiance of the eyes, problems arise. To do this, use LEDs and slightly transparent white plastic from the bottles. But the backlight can shine strongly in the eyes, and therefore it is better not to use it for a long time.

Ironman costume that looks just like in the movies, ready. You can try it on and go to various fan gatherings such as comic-con or similar meetings.

Attention, only TODAY!

Well, fellow papercrafters, it's time to make the Iron Man Suit with your own hands.

By popular demand, we are posting the Mark 6 Iron Man costume. I don’t know why, but we decided to start with this particular model, so get ready for a long and exciting quest to collect all the parts together. First of all, we buy a valerian pack, scalpels there, all the cases, and read further about how to make an iron man suit with your own hands.

Well, first of all we need the Iron Man Mark VI helmet. I attach the actual scan (drawings). Occupies 14 pages in pepakura. Well, actually, we collect it like a regular helmet. Even a couple of spacers are included.

Iron Man Helmet Mark 6 -

What goes behind the helmet in our iron man suit? Correctly Neck! It takes 7 pages in papakura, it is not difficult to assemble, as always you will have to worry a little with fintiflyushki.

Next, we will take on the chest of the gallbladder. Here it would be necessary to measure your chest, or rather ribs and compare with this scan. This model of the female breast is made for the average static adult papercrafter. The girth in the ribs in this drawing is 32 cm in the narrowest place, on average 35. Perhaps you are starving or, conversely, a noble bodybuilder, so it is better to play it safe.

Oh yeah, I almost forgot about the collar from the Iron Man suit. Two pages and assembled easily.

This time, the Iron Man suit will gain forearms. Contrary to the expectations of some, the forearm is between the biceps and the hand. This useful part takes 10 pages in pepakura. It's easy to assemble. Requires mirroring.

And finally, the last part of the hand is actually the palm itself and the fingers of the iron man made of paper. Judging by the scan of the hand, it smells of the first difficulties here, although it may only seem.

So, our do-it-yourself iron man suit is slowly beginning to take shape. Now it's time for the press, or belly, which makes us a little upset, because it takes as many as 25 pages, a lot of ends.

The time has come for the intimate part - ZhCh panties. These, of course, are not panties, but a codpiece, but whoever you like best. Takes a coward 8 pages in pepakura, easy to assemble.

Well, here we come to the feet of our iron man suit. The thigh of our hero is located on 15 pages. Don't forget to mirror.

Well, that shin arrived in time. She also swung something on 21 pages, has both the left and the right part. A couple of spacers are included.

Well, here we come to the completion of our miracle costume. Foot comrades papercrafters, foot ...

This piece in the Iron Man suit is attached between the forearm and palm. Some call it the wrist plate. But the main thing is that you understand where she should find her refuge.

Well, that seems to be all. It's just something to do. I sincerely wish you good luck, because it will come in handy if you decide to bring all this to mind. Something like this should come out after gluing the paper model. True, this is a different mark.

The briefing is over. A short anatomy lesson is complete. Start gluing! GOOD LUCK!

Print Thanks, great lesson +5

Any boy would like to be like at least one superhero. It's so great to have some kind of ability that only you will have. With her, you can feel strong and brave in order to fight evil and save the world from trouble. Therefore, we suggest that you and your child make an Iron Man mask together.

• Colored paper in red and yellow
• Cord or rope
• Black marker
• Simple pencil
• Stationery glue
• Scissors

Step-by-step photo lesson:

Draw the silhouette of the Iron Man mask on the red semi-cardboard. Next, carefully cut it out with scissors.

Now let's cut out the ears. There are only two such details.

We glue the ears from the back.

Then take a yellow sheet of thick paper and outline the silhouette of the red mask a little. We begin to draw the details, which should be yellow. They should not go beyond the mask.

Cut out. We apply it to the base, namely the red mask. Adjust the shape if necessary.

We glue the yellow part of the mask onto the red one.

With a pencil, we begin to draw the eyes and mouth.

Cut holes for the eyes along the contour. It is best to do this with small scissors so as not to go beyond the contour. Moreover, it will look neater this way.

Outline the area around the eyes with a black marker, creating an outline. We will also draw lines for the mouth and strokes for all other parts of the mask.

Then take a black string or lace and glue it on the back side by the sides. To keep them well, you can use hot glue from a gun.

On this, the Iron Man mask made of colored paper is ready. She will delight many boys who watched cartoons or films about this superhero.

Beyond obvious attractiveness and charisma Robert Downey Jr. as a genius billionaire turned superhero - Tony Stark- the movie from Marvel has created a great temptation to find out what kind of toys and devices are built into the latest version of his high-tech suit. And while innovations such as a suit that unfolds from a suitcase right on your body, or clothes that always follow you when you wear special bracelets remain in the realm of science fiction, there is still hope. Much of what is built into the suit " Iron man"Has analogues in our world, albeit not as chic as in the film.

With a durability-enhancing exoskeleton and jet beams, as well as a robotic assistant, becoming a real Tony Stark will be quite difficult - and certainly not cheap - but not impossible, anyway.

Despite how cool Tony's toys are, without a source of energy, they will remain only beautiful armor. You need to connect a small arc reactor based on cold fusion.

Fusion reactor technology is at the heart of the Stark Industries business and the Iron Man suit. There are no analogues of this technology in our world yet (though). Marvel.com suggests that the technologically comic reactor has its roots in the tokamak, an experimental Cold War thermonuclear reactor developed back in the USSR. Like the arc reactor, the "tokamak" is made in the form of a toroid, includes plasma, magnetic fields and generates a huge amount of energy.

The tokamak is much larger than the arc reactor - even larger than the prototype at Stark Industries - and has still not gone beyond the scope of the experiment. But given Tony's genius in miniaturizing complex structures, most likely the basis of a fantastic thermonuclear reactor is precisely the tokamak.

According to Neil DeGrass Tyson, the problem with designing a fist-sized power source is not so much about generation as about storage and potential side effects. For better performance and minimization of burns, DeGrasse Tyson recommends a different type of power source: one of them can be based on controlled annihilation of matter and antimatter. , For example.

Reactive gloves

The jet-beam glove is one of Tony Stark's most used weapons, but it can hardly be accurately recreated in the real world. Of course, this option is not suitable for the quivering fans of "Iron Man". One of them, the German Patrick Pribe, during one of the breaks in his work (for the processing of polymers) made something that looked like a reactive glove: a laser built into his hand.

A laser powered by lithium-ion batteries may not have the destructive power of Iron Man's gloves, but it can do harm. It emits a 1000 mW beam, which is 200 times stronger than the laser beam allowed for use in most countries. In short, if you want to fry your cat, he may well catch fire.

Not satisfied with the work done, Prieb went further and created what he called "", completing it with a retractable laser.

According to the legend of the "Iron Man", the hero can fly thanks to powerful jets of energy beating from the feet of his shoes. They move him through the air, without the danger of spontaneous combustion of his legs and without the need to wear high heels that would make the hero look like a representative of glam rock. However, in our world there are no jet boots that will help you take off, but there is something different: a personal jetpack. Jetpack.

Personal jetpacks have been around for a long time. The first sample appeared in 1919 in Russia, its creator was the inventor Alexander Fedorovich Andreev, but only in 1960 the first jetpack was presented to the public. Unfortunately, the high cost and short flight time meant that the hype around the invention would quickly disappear.

But the dream lives on. New Zealand-based Martin Aircraft has developed the Martin Jetpack, a petrol-powered personal jetpack that can be airborne for up to 30 minutes at a time. It is intended for the consumer market. According to some estimates, its price is about $ 1 million, and this is the minimum. But no one disputes the fact that all initiatives are expensive for the real Tony Stark.

DARPA (Defense Advanced Research Projects Agency of America) has been working on exoskeletons that can improve the physical combat capability of American soldiers for over a decade. In 2010, defense contractor Raytheon unveiled one of the results for the first time: the XOS 2 exoskeleton.

The suit is designed for work in the field of logistics, that is, logistics, significantly increases the strength of the wearer, allowing him to easily penetrate the three-inch layer of wood. Built-in hydraulics work independently of the muscles of the suit wearer, thus giving him the ability to work for three. Lightweight materials and construction leave maneuverability, which massive military equipment cannot boast of.

There is, of course, a problem. Each suit must be plugged into an outlet and also connected to a central control panel. The tie-on suits are slated for release in 2015, while Raytheon is developing loose-fitting suits for future use.

Exoskeletons are used not only in the military environment, of course. Outside the theater of war, the same technologies can help people re-learn to walk and gain extra muscle. In fact, it is Ekso Bionics, one of the leaders in the development of medical exoskeletons, who shared their technology with Lockheed Martin for military purposes, not the other way around.

Like the military exoskeleton, medical devices are designed to help the body with added strength, but they also help the muscles retrain and strengthen them in the process. It may not be possible with their help to lift a row of wooden beams or rockets, for example, but thanks to exoskeletons, people who cannot walk or do not have such a precious opportunity will get it.

Thought-Controlled Computers

If the fact that Tony Stark controls an entire suit of high-tech armor with the power of thought seems completely impossible to you, how surprised you are that there are already technologies with which you can control a computer system with just the power of thought.

An experimental system has been developed in the Advanced Technologies Laboratory in collaboration with Ruzbeh Jafari, assistant professor of electrical engineering at the University of Texas, that allows you to control, for example, a Samsung Galaxy tablet without touch or voice commands. It's all about where you are looking and where you focus.

It must be admitted that technology has not yet reached the stage where it is possible to write a rudimentary message using this method, let alone control a complex military machine. So far, the user's choice is limited to a meager menu. But this is just the beginning.

Holographic display

While watching the movie "", in the scenes showing Tony Stark inside the armor, we see screens popping up in front of him, providing him with the necessary information. It looks great. Why don't we have this? In fact, everything will be, and very soon.

In fact, the point is not in glasses that can take pictures, thereby bringing Google Glass closer to Iron Man technologies, but in the very concept of a wearable computer connected to the Internet, which can respond to voice commands and display information available only to the wearer. Obviously, miniature glasses for Instagram lovers are the first step towards a full-fledged helmet that will help fight crime.

J.A.R.V.I.S.

Smart homes are a tempting idea for science fiction lovers. However, with advances in wireless networking, data analysis and systems like J.A.R.V.I.S. are rapidly approaching scientific reality.

According to Dayana Cook of the Washington University School of Computer Science and Electrical Engineering, the key to intelligent housing will be an ubiquitous intelligence capable of seeking and interpreting information, as well as autonomously acting according to algorithms. Some of these systems already work in your home. Air conditioners can automatically adjust the temperature, refrigerators can defrost automatically. Etc.

While Jarvis is an assistant at Stark’s lab, Cook’s research on smart homes is focused on something else: she’s exploring how mobile intelligence can help retirees live longer without outsourcing.

If you are still a fan of Tony Stark technology, we suggest you take a break from the movie and go straight to the comic. One version of the iron suit is equipped with rollers that extend from the bottom of the armored suit.

A natural question arises: although the impetus to the development of technology in the film led to the creation of elements of exorbitant power, why not take and equip your iron suit with rollers?

Unfortunately, science does not give a definite answer to the question of how to find a reasonable and nice secretary who will be infinitely loyal to her boss.