How to make a swing from wood and metal. Children's swing with their own hands: what can be made of, drawings, dimensions and instructions with a photo Children's swing with hands, a diagram

Children can ride the outdoor swing for hours. The child is attracted by the sensation of flying. In apartment buildings, swings are installed in playgrounds, and in private plots, they are installed by caring parents.

The simple design makes it possible to make a do-it-yourself hanging swing. Moreover, children can be involved in the design, construction or decoration process.

Outdoor wooden swing - children's joy in flight

Making a swing from wood is the most common practice. This is not surprising, because they differ in the following advantages:

environmental friendliness;
availability of lumber;
relatively low cost;
ease of working with wood;
security. The wood material is soft, which reduces the risk of serious injury from a fall.

Due to the properties of wood, a children's wooden swing can be found in almost any private yard or in the country. From the point of view of mobility, they are divided into stationary and portable. A swing made of wood, unlike metal, is often made stationary, because the tree does not have sufficient weight for stable standing (the frame of a wooden swing requires reliable fastening).

Based on this feature, it is necessary to think over the installation site of the swing.

Where to put the swing?

When choosing a place, you need to consider:

visibility. If possible, the child should be in sight;

remoteness. The economic zone and the nearby reservoir are not a place for games. If there are no other options for installation, you need to fence off the areas. Also make sure that the swing is located at a safe distance from fences, walls with windows, trees, etc. obstacles to flight. It is also not worth installing a swing next to communications;

illumination and shading. The installation site should be light, but create shade, especially in the summer at noon;

humidity. Outdoor swing made of wood will become unusable from excessive moisture, not to mention its harm to the child;

lack of drafts;

absence of poisonous plants, allergens, honey plants, thorny bushes;

surface relief at the installation site. The installation site of the swing must be leveled. Then you do not have to vary the length of the support pillars, and the child will not have anything to interfere with enjoying his favorite fun;

the quality of fastening of each node of the swing.

How to make a swing from a tree with your own hands - step by step instructions

To be sure of reliability, you need to build a swing yourself. A step-by-step guide for beginners will allow you to indicate the correct direction and construction plan.

Stage 1 - choosing the design of a children's swing made of wood

Children's wooden swing should be safe - this is an axiom! In many ways, their ability to stand steadily is determined by the configuration of the support (frame). Before starting work, you need to decide which frame of a wooden swing will be optimal for installation. After all, its shape affects the safety of the structure and determines the place and method of its installation.

Types and types of swing frames

U-shaped frame

It is considered the most economical model. Less lumber is used to make it. In addition, the supports do not interfere with the movement of the child and cannot cause injury through negligence. However, for stability, the structure needs concreting of the supports, therefore, it is stationary. The frame is ideal for installation on soft ground and for the manufacture of suspended sectional swing.

L-shaped frame

It is sometimes referred to as the upside-down "V" support. More stable compared to the previous version. This option allows you not only to hang a swing, but also to create a children's corner.

X-shaped frame

It is a type of L-shaped, only the support beams are fastened not at their junction, but slightly lower, at a distance of 150-200 mm. A jumper is laid at the intersection of the vertical bars. This is an easier way to make a support. It should be noted that such a frame needs additional reinforcement in the form of a side stop.

A-shaped frame

The most reliable of all designs, due to the lintel, which reinforces it. It is this frame that should be preferred if it is planned to expand the swing by arranging the stairs, installing a rope for climbing and other elements of the playground.

Stage 2 - drawing a wooden swing for children

The presence of a drawing or a sketch of a swing helps to determine the optimal dimensions of the structure, calculate the load, choose the right section of wood for manufacturing, determine the amount of material and parameters of the blanks.

Drawings of a swing made of wood should contain:

frame configuration (shape);

dimensions of a wooden swing. It should be noted that the dimensions of the swing are the height as well as the perimeter of the base;

presence and place of installation of additional reinforcing elements (kerchiefs, spacers);

the number and type of sitting (taking into account the age of the child);

type and length of suspension (ropes, chains, cables, etc.);

You can make an additional drawing with a detailed breakdown and dimensions of the blanks.

The dimensions of a wooden swing are determined based on:

the age of the child - the length of the suspension, the size and configuration of the seat depends on it;

growth - determines the length of the suspension.

You can make a swing "for growth", then:

the optimal seat width is 600 mm.

seat height above the ground - 500 - 550 mm. This will allow, on the one hand, to swing and stop the swing on its own, and on the other, it will not interfere with rolling;

height from seat to crossbar - 1,600 mm. To make it comfortable for the child to swing while standing;

the total height of the swing from the ground to the bar is determined taking into account the thickness of the seat.

Advice. The seat and harnesses must be able to support the child's weight. For reasons of practicality, it is better to make a safety margin of up to 100-120 kg (several children or a child and an adult).

Stage 3 - material for wooden swing

To make a wooden swing with your own hands, you need to choose the right wood. It is better to give preference to durable types of wood - oak, larch, or cheaper ones from spruce, pine, birch. The main thing is that the lumber is dry, of good quality, without falling out knots, holes and other defects.

Depending on the type of frame, you need to prepare:

for a U-shaped frame - timber 80x80 or 100x50 - 2 pcs. For all other types of frame - 4 pcs.;

for the crossbar - a bar (log) with the same section - 1 pc .;

for sitting - boards 600x300x25 - 1 pc. For the manufacture of a seat for children under 2 years of age, additional elements are thought out - a back, handles, fences;

for suspension - a welded chain with an anti-corrosion coating or a strong rope (the one used by climbers is suitable). The length of the suspension is equal to two heights of the swing. On average - 4 500 mm - 1 piece;

for fixing the frame - wood screws 80x4.5 - 40-50 pcs., as well as self-tapping screws 50x3.5 - 250 pcs.

for attaching the suspension - a carabiner, hanging hooks, steel corners. Quantity - depending on the method of fastening;

for wood processing (protection) - primer;

for decoration - paint or wood varnish.

for concreting racks - cement, gravel and sand (for mounting a U-shaped frame).

From the tool you will need: a screwdriver, a saw, a plane, a grinder, a level, a drill, a plumb line.

Stage 4 - making a homemade swing from a tree for a summer residence

We pass from theory to the practical implementation of the project. Consider how to make a wooden hanging swing with your own hands.

Preparing a place for installing a swing

After choosing a place, you need to remove the remnants of construction waste, remove thorny bushes and level the site.

Note. Some users advise concreting the platform for the swing, citing the fact that in the place where children push off the ground, a pit appears in which water accumulates. Others believe that this is the lesser of the troubles. After all, falling onto a concrete base is a serious risk.

Lumber preparation

Outdoor wooden hanging swings should be safe for children. Therefore, you need to grind each workpiece in order to exclude the appearance of splinters. And also cover all wooden elements with a primer. Ready-made swing can be primed, but then there is a possibility of destruction of the wood at the joints.

Installation of a frame for a children's swing made of wood

As discussed above, there are several ways to construct a frame. Therefore, we will consider the main nuances of installing each of them:

U-shaped frame. The arrangement begins with the fact that the vertical posts and the upper lintel are fastened. Then you need to dig two grooves (the depth is 1/3 of the height of the support). Pour a crushed stone-sand cushion on the bottom, set up a stand, concreted, wait until the concrete hardens, and install a suspension with a seat.

Note. The lower part of the supports must be treated with any means that will prevent wood from rotting. The most cost-effective and reliable option would be to use waste engine oil.

L and A-shaped swing frames are usually also assembled on the ground. Procedure: cut four supports at an angle for a more reliable connection. Then attach the top bar to the knot. In the case of the A-frame, a crossbar is added to make the structure more stable. Then the assembled frame is installed in the prepared place. For reliability, you can stick it into the soil (pre-treated with an anti-rotting primer) or fix the lower part of the supports to the ground using a long rod and a bracket.

X-shaped swing frame. It is done similarly to the previous one. Only the ends of the supports are not filed, but fixed to each other. A jumper is placed in the formed upper corners.

Note. To prevent the installed X, L and A-shaped frames from falling into the soil, users recommend concreting the spots under the base. Thus, the likelihood of skewing of the structure is eliminated and its mobility is preserved.

The weak point of the X, L and A - shaped frames at the junction of the vertical supports and the lintel. To make this knot, long self-tapping screws are used, but, as the masters note, it is advisable to use a nozzle-nozzle of suitable sizes. The photo shows this element and its installation location.

Advice. It is necessary to fasten the self-tapping screws in the manufacture of the frame in this way: first, drill a hole with a diameter slightly less than the diameter of the self-tapping screw, and then assemble the blanks on the self-tapping screw. Some masters advise, for reliability, to glue the joints of the workpieces, while others recommend strengthening the knot by using metal plates or wooden spacers.

Seating device for swing

The manufacturing method and material of the swing seat is determined by the age of the child. Children are not picky about design, they are quite satisfied with a tire seat or a simple board. In this case, you can count a dozen ways to make it.

Attaching the swing to the bar

A hanger (cable, rope or chain) is attached to the crossbar. The hanger is a swing assembly for attaching the swing to the crossbar. The suspension carries the maximum load, which means that special safety requirements are put forward for it.

Note. The seat is installed only on chains or cables, not on wooden or metal hangers. Garden swings are designed for adults and do not need to be adjusted, and a garden swing made of wood for children needs to be adjusted as the child grows.

Attaching the swing and seat suspension can be done in several ways using different fasteners:

throw the rope over the crossbar and tie or fasten with a bracket;

using metal pads that are attached to the crossbar at the top;

with a carabiner.

Material prepared for the site www.site

By screwing the anchor into the crossbar and attaching the suspension to it.

By wrapping around the bar.

Stage 5 - decorative design of the swing

Decorating a wooden swing has a twofold function. On the one hand, it protects wood from external factors. On the other hand, the original design of the swing forms a beautiful and bright element of the playground. The main rule is that paints and primers must be of high quality and safe so as not to harm the health of the child.

As an additional decor, you can install additional jumpers on the frame, which will strengthen it, and the children will have a ladder that will be interesting for those who are waiting in line to ride.

Wood swing care

Care consists in checking:

attachment points;
suspension;
seating;
the quality of the paintwork.

give the swing a load greater than that for which it is designed;

avoid shock loads (sudden sitting on the seat);

try to distribute weight along the plane of the seat (do not heel);

ride perpendicular to the support. The suspended swing is designed to ride along the supports;

stick to a moderate swing amplitude to avoid overturning an unsecured swing.

Conclusion

The reliability of the installation of the suspension and the seat, and at the same time the strength of the entire structure, we check on ourselves. If nothing deforms under the weight of an adult, then the child will stand. However, a wooden swing for a summer residence needs periodic inspection of the main assembly and attachment points.

Swing at the summer cottage is not always fun for children. They are mainly used as a decorative element and complement the landscape design. Moreover, they serve as a great way to relax, swaying a little, after a hard day at sunset.

At the dacha, you can build a swing from wood and metal with your own hands, and it is not at all necessary to buy a new product in a store for unreasonable money.

What the swing is made of

Mostly either wood or metal is used, but it is best to use both as it requires the warmth of the wood as well as the strength of the metal.

This mainly concerns the support of the swing, but the seat can be made of completely different materials, for example, it can be plastic, timber, ropes, chairs or even armchairs. Look at the photo of the garden swing and you will see many options that you did not even know about before.

The basic rule of the swing is comfort and safety. The seat and support legs must be very strong to support several people at once.

To hide from the rays of the sun, you can make a small fabric canopy or polycarbonate, wood and roofing elements.

Swing with a soft chair

Before you start building, you need to think over the purpose of the swing, namely who will use it, location, seasonality.

It will not be superfluous to choose such a model so that it is combined with the general picture of the site, that is, with a house, a bathhouse and a garage.

Mobile swing

Such a swing can be assembled and disassembled, as well as carried to another place. A very handy product if you have children. Such a swing can be either suspended or on special supports that are installed in the ground.

The best ideas on how to make a swing for children are in the names of the swing itself - it can be balance beams, a hammock, or even a sofa.

Moreover, you can think about the construction of non-standard swings: in the form of chips, oval, which are suspended on a special rack, in the form of various figures of animals and vehicles

Make such a swing for children, and they will spend all their free time without parting with them.

Instructions on how to make a hanging swing

For a hammock swing, a support frame is usually not provided. Only the seat itself is made, which is subsequently hung on a strong chain or rope to the beams on the ceiling or massive tree branches on the street.

Tires

The easiest way to make such a swing is to take an old unnecessary tire, which has not yet completely deteriorated. It is tied with a strong rope and hung under a tree. In addition to the rope, you can use a chain, which is secured with a nut and screw.

Moreover, you can not just pass the mount through the hole in the tire, but make three holes in the plane of the rubber and fix the hook mounts there with nuts and wide washers.

Wood

It is also very easy to make. You need to take a sturdy board and drill four holes in it at the corners. A rope is passed through and also attached to a tree branch. Go further and instead of a board, use an old but reliable chair with sawed-off legs, so your swing will have a back.

Hoop

It is imperative to use only a metal hoop, inside which a cobweb with small cells is woven with a rope. To increase the safety of such a swing, it is better to cover the metal frame with foam rubber and fix it. Such swings are fastened in the same way as all the previous ones.

Canvas swing

We take a piece of strong tarpaulin, several corners and rivets. It is important to fold the tarpaulin several times and sew the layers together with high quality. The material is inserted into triangles at the edges and secured with rivets. With the help of a rope or chain, the swing is suspended from tree branches or from the ceiling.

Swing on racks

If you want to make a standard type wooden swing on support posts for the whole family, then you need to draw up the correct drawing and calculate all the dimensions of the future swing for reliable manufacturing.

To make them, you will need some materials and tools - a very strong and thick rope, a lot of wooden products from which the seat will be assembled, possibly plywood, as well as fasteners. Do not use nails or self-tapping screws, as they will not provide the same security as galvanized bolts.

To build the support, use a large beam that can withstand the required weight. The bars must be brought as deep as possible into the ground so that the swing does not go back and forth when swinging. It is also important to cover all wooden elements with an antiseptic so that the wood does not deteriorate over time.

When making a garden swing with your own hands, use the step-by-step instructions so as not to be mistaken in the stages of construction. Keep in mind that swings are fun, but falling off them can be painful.

Photo of a swing with your own hands

To diversify the rest in the country, in the shade of the garden trees, there is a comfortable swing, where you can relax and recharge. We want to tell you how to make a garden swing with your own hands, because it is doubly pleasant when joy is also brought by the use of the product of your own labor.

Preparation for the construction of a swing

Choosing a place on the site

A swing is not just a bench or a stump with a seat, this type will be a stationary and relatively capital object, so you need to choose the appropriate place for it.

This means that we need to take into account all the nuances of this structure, namely:

Mobility. Part of the structure is a movable unit that performs damped oscillatory movements under the action of gravity, like a pendulum. Therefore, it is necessary to calculate the maximum stroke of this pendulum in each direction and make sure that there are no obstacles within these limits: trees, stumps, bushes or pieces of garden furniture;
Stationarity. To ensure the movement of one part of the structure, it is necessary to securely fix the other part of it - the support frame. To do this, we will have to bury them in the ground and concrete the racks to a depth of 60 - 70 cm;
Site quality... You've probably noticed the constant puddles and mud under the yard or homemade swing, as the ground under the seat is constantly scrubbed with your feet during braking, and a depression is formed there where water and dirt accumulate. Therefore, for a comfortable use of the attraction, you should immediately save yourself from this misunderstanding - make a concrete screed or put tiles, rubber, at least make a gravel backfill.

Important!
For normal and long-term operation of the structure, it must be installed as evenly as possible, that is, when the seat hangs freely in the lower position, the chain or cable must be perpendicular to the upper crossbar.
It is most convenient to use a plumb line to control this parameter.

It is also important to remember that it is very dangerous to be in the vibration zone of the attraction bench, as you can get a strong blow and seriously injure a part of the body. Therefore, this area should either be restricted for access or ensure that no people or animals enter it while the swing is operating.

Another aspect that is often overlooked: most likely, the attraction will be a permanent place for your children to play, so it is better to think in advance about a way to limit the zenith or the highest point to which you can swing the pendulum. Otherwise, children, due to unreasoning, can swing it up to a full turn around the crossbar, winding chains on it and falling upside down.

Important!
From all that has been said, one can draw the following summary: the place for should be spacious, even, free from obstacles and be in the line of sight relative to the house for control and safety.

The choice of material and type of construction

Several factors will depend on the choice of the type of construction and materials:

Reliability;
Durability;
Price;
Security;
Relevance from a design point of view.

As a rule, two types of materials are used for self-production: wood and metal, as well as their combinations. We will not consider concrete work and site improvement work for now.

At first glance, metal models are more reliable and durable, and other things being equal, it is so. However, metal is also susceptible to corrosion, and if it is improperly processed, this advantage is easily lost.

On the other hand, properly selected and processed wood, with timely care, demonstrates quite acceptable reliability indicators comparable to metal.

If we consider these materials in terms of safety and artistic value, then wood is the undisputed leader here (unless, of course, your garden is not made in the style of a Gothic cemetery and is not replete with forged trellises and fences).

It is also important that the processing of wooden parts is much easier and does not require tools such as a grinder, electric and gas welding, a drill for metal, etc.

If we talk about cost, then a really beautiful forged frame will cost much more than high-quality wood, and the use of banal pipes or corners will result in a "freak" that will ruin the beauty and atmosphere of a country estate.

Important!
We consider the most suitable from the point of view of expediency a wooden structure, reinforced with metal parts in some places.

Making a swing

Before starting work, it is necessary to draw up a work plan and a drawing. You can easily find drawings of a garden swing with your own hands on our website, you can also make them yourself.

We take 4 three-meter beams 100x100 mm and make two L-shaped structures, connected at an angle of 50 - 55 degrees using furniture bolts;

We retreat from the lower end of the support 60 cm and divide the remaining part by three. At the level of the border of the first and second thirds, we mount puffs from an edged board, two for each leg. We fasten with bolts.

Now we connect the resulting frames with a 100x100 mm crossbar made of oak timber. We select the length of the crossbar so that the width of the frame is 50 cm greater than the width of the seat.

We dig in the legs of the structure to a depth of 70 cm, where 10 cm will be filled with rubble and sand. Next, we concretize the pits with a solution of cement, sand and crushed stone 1: 3: 5. We set the structure along a plumb line so that the thread is perpendicular to the crossbar;

Important!
Part of the support beam, which will be immersed in concrete, is treated with bitumen mastic.

Output

A good wooden swing in the country is a great place to relax and a joy for children of any age. We told you how to make them yourself, the nuances are in the video in this article.

One of the children's favorite pastimes is swinging on a swing. There is a swing in almost every courtyard in the city. However, in the summer, children often go to their grandparents in the village or take them to their dacha. To diversify the rest of your child, you can make a children's swing for a summer residence with your own hands. Instructions, photos and diagrams can be found in this article.

The swing can have a different design: from the simplest "bungee" to a large swing on which you can even lie. Further, the designs of the swing will be described, which you can make yourself, in order of increasing complexity.

Garden swing is very popular in the country.

The simplest swing familiar to most is the bungee swing. It is a solid stick tied to a tree on a rope (rope, chain). The bungee is made extremely simple: a strong stick about half a meter long is selected (you can saw off part of the handle for a shovel, rake, etc.), a rope is tied to its middle, the other end of which is attached to a thick branch of a tree. It is best to use the so-called scaffold assemblies - they tighten themselves and hold the load well. A child can make such a swing independently. The bungee can be improved if, instead of a stick, take a sturdy board, drill in the center and pass the rope through the hole, and then fasten it with a knot.

The simplest bungee can be made from rope and stick.

Slightly different from the bungee is another shell - a trapezoid. The trapezoid is the same stick, but the rope is not tied to it in the middle, but from both edges. The rope can be solid, but you can use two of the same length. If one solid rope is used, it can be fixed to the branch with a regular loop (photo 1).

Helpful advice. It is better to choose a stick with a significant margin of safety. Firstly, the increased strength guarantees the safety of the swing, and secondly, then you can cut small grooves on the stick in the places where the ropes are attached so that they do not slip - this also increases safety.

Tarot rope can be fixed between two supports

The simplest swing

The simplest swing can also be hung on a thick branch, but it is better to make a crossbar with supports for this. The structure of the supports will be described at the end of this article.

Simple rocker with padded seat

The seat is a square or rectangular plank suspended from four corners. You can use plywood. Not far from the corners, four holes are drilled in the seat into which a rope or eye is passed (there is a ring at the eye instead of a head); if the eye is not used, then the rope can be passed through the hole and tied in a knot (its thickness should be equal to the diameter of the hole), thus fixing the board to it. If an eye is used, then instead of a rope, a chain can be taken, which is attached to the eye with a carabiner.

A backrest made of the same plywood can be attached to the seat on the metal corners. Another version of the backrest (suitable for small children) is shown in photo 2. Tubes made of wood up to 30-40 cm long (of the same length!) Are put on the ropes, after which a stick-crossbar with drilled holes along the edges is put on every two adjacent ropes. This design, despite the simplicity of manufacture, is quite convenient, safe and will serve for a long time.

Note. Instead of putting on wooden pipes (not everyone can make them!), You can tie knots on the ropes at an equal distance from the seat. Then the crossbars will be held by knots, not tubes. It doesn't look so aesthetically pleasing, but it is easier to manufacture.

Helpful advice. When making any wooden parts of the swing, it is necessary to clean them with a sandpaper or a file - this will protect your children from splinters and give a more aesthetic look to the product. In order for the swing to serve for a long time, it must be varnished or painted to protect it from moisture.

Swing made of wooden pallets (pallets)

The chain or rope is also fixed to the wooden pallets at the four corners. The advantage of pallets lies in their large size and strength: on wide pallets it is convenient to swing while standing, or you can put a mattress and swing while lying down. Pallets can be joined together to form larger structures.

Seating swing made of wooden pallets (pallets)

Swing from car tires

Car tires are strong enough but cut well. The most primitive application of a tire is similar to a bungee: the tire is tied to a branch with a rope in an upright position, you can sit in such a swing. But such a seat is not very comfortable, and its appearance is not aesthetically pleasing. This is not a reason to stop using tires.

A tire swing tied horizontally on three or four chains looks much better. Four or three holes are drilled in the tire at an equal distance from each other, into each of which an eye is inserted and secured with a nut. Between the eyelet and the seat (and between the nut and seat), it is useful to lay wide washers. The ropes (or chains) are brought together to support at one point on a steel ring.

The strip cut from the tire is used instead of the board, as described above. In this case, “ears” are attached to the edges of the strip from the tire, for which the rope is held or the carbine is hooked with the chain.

Tires can be used to make various shapes for a swing

Swing made of fabric on a metal frame

The swing seat can be made from a metal frame with a strong fabric stretched over it (for example, a tarp). Rope weaving can be used instead of fabric. An example is a hoop swing.

A swing made of a hoop resembles a hammock: a wide and strong hoop is tied to three or four ropes, from which thin ropes, woven by the macrame technique, into a kind of spider web, go to the center. The weaving pattern can be different, the main idea is that the weaving can withstand the weight of your child. The hoop is usually wrapped with foam rubber and cloth, or braided with twine, so as not to injure the child with a possible impact and for greater comfort. Instead of macrame, you can stretch a tarp over the hoop, as noted above.

Supports for the swing. Attaching the swing to the supports

Supports (goats) are made of three bars, logs, boards or metal and look like the letter A: their lower ends are placed in specially dug holes and buried or concreted. It is better to make a crossbar even for a children's swing from a metal pipe. In the absence of a pipe, a beam is placed on the trestle - a thick beam or a rounded log. The structure must be solid and not wobbly. Steel supports are assembled using welding, and wooden ones are connected with screws, anchors, self-tapping screws and metal corners.

If the seat is suspended from a metal bar, it is a good idea to use rings - plastic, metal or wood. The latter can be carved out of wood yourself. If you tie a rope to a tube without rings, the rope may fray. Then it is necessary to regularly check its strength. If there are rings, then it is better to lubricate the contact points of the rings and the crossbar.

If the swing is suspended from a log or beam, then rings are not needed: the rope will not slide on the tree due to strong friction. Both ropes and chains can be attached to eyelets (or hooks) firmly screwed into a bar or log. Wooden structural elements must be varnished or painted to protect them from moisture.

Instead of a wooden crossbar with eyelets, steel crossbars with rings welded to them can be used. On a wooden beam, the frames can be replaced with clamps on which to hang carabiners. The chains can also be attached to the uprights using anchors with wide washers. In this case, the beam is only needed to give the structure stability and rigidity.

Cribs can be attached with chains

The chains can be attached not separately, but connected with rings: the left chains are attached to one, the right ones to the other. Rings are also suspended on carabiners from eyelets, hooks, clamps or welded to a metal bar.

Children's rope swings are not as reliable

Let's dwell on two more types of swing.

Rocking chairs

A rocking chair can replace a swing for a child. The advantages of a rocking chair include safety for the rocking chair (there is no risk of rope tearing) and mobility (you can bring it into the house, you can take it out into the street); the disadvantages are the relative complexity of manufacturing and the fact that such a chair can crush the leg of someone standing next to it. A variety of rocking chairs can be considered wooden rocking horses. The main difficulty in the manufacture of a rocking chair is the manufacture of rounded runners; for a baby rocking chair, they can be cut out of thick plywood.

Rocking chairs are safe and fit even for the smallest

Rocking horse made of solid wood

To make the runners, you need to draw their outlines on a sheet of plywood and carefully cut them out with a jigsaw, then clean them with a file and sandpaper. A seat made of plywood or chipboard (plywood is stronger and lighter) is attached between the runners on metal corners. It is necessary to work very carefully so that the rocking chair does not turn out to be crooked.

A floor rocking chair for babies can also be made of thick cardboard

The seesaw.

The swing-balancer is a long bar-board, at the ends of which the seats are made. At least two people can swing on such a swing. The simplest version of a swing balancer is done like this:

A long (2.5 - 3 m) solid board or timber is selected, cleaned and sanded.
Handles are screwed on each side about half a meter from the edge. To do this, on both sides of the beam, it is attached along a plank, to which the crossbar is then attached (photo 5).
Seats made of plywood or boards are screwed or nailed on both sides, it is advisable to attach cushions so that the seats are soft.
A thick, strong pillar about a meter long to a depth of half a meter is dug into the ground (or concreted).
A hinge is screwed or nailed to the middle of the bar, which is then attached to the buried post.

Another option is also possible, when runners are cut out of thick plywood, as for a rocking chair, and are attached to the middle of the beam. Then the swing becomes portable and can be used indoors.

The scheme of making a swing - a balancer for children

Security

When making a swing, remember: negligence in work can result in injury. Be sure to choose strong chains and ropes, check the stability of the structures. It is better to spend more time and money and make the swing stronger than necessary, than to become the culprit of a spoiled rest, and worse, a serious injury to your own child, due to an error in calculations.

There is another interesting type of swing - this is a grasshopper swing. Grasshopper swing scheme

Swing for a summer residence with your own hands

42 photos:

We will send the material to you by e-mail

You can create these designs yourself or purchase a ready-made set of factory production. In any of the options, it is necessary to study in detail such a popular version of children's fun as a children's street swing for a summer residence. The types, materials, production of such a structure are of a huge variety, so the information presented in our review will come in handy when choosing the right products in the store. It will also help you not to make mistakes during the implementation of the corresponding project with your own hands.

High-quality swing is an indispensable component of a full-fledged playground

For whom and what benefits are the swing for giving: obvious facts and important nuances

Do not assume that swings and slides are for children only. Beautiful products will adorn anyone. The sturdy structures are capable of supporting the weight of a teenager and an adult. It should be remembered that appropriate entertainment and play facilities will distract the child from other activities for a long time. This tool will "create" free time that parents can use at their own discretion.

After careful study of this issue, it is not difficult to formulate the following positive results:

The baby swing is an effective tool that replaces the bassinet. With their help, without any extra effort, they create specific movements so that the baby falls asleep calmly.
When the child begins to walk, the garden swing for children will help develop the vestibular apparatus, dexterity, and strength. They will be useful for exploring the world around you and your own physical capabilities.
Even a small indoor rocker for children in an apartment is quite suitable for learning independent actions.
Double and balancing stationary models for a child in the country will help to establish communication with peers.

For your information! The attractive, well thought-out design provides a good environment for physical activity. It distracts attention from computer games and other sedentary activities. A high-quality children's sports complex with swings for babies is an effective preventive measure. It strengthens health, improves the protective functions of the body.

The above photos with comments explain the need for serious preparation for this project. The double swing should be designed for a solid weight. Outdoor constructions, adults, create with a sufficient margin of safety. Decorative and protective surfaces and materials are selected taking into account natural influences. You should create a diagram with dimensions, a list of accessories. It will be useful to study the reviews of the owners if a decision is made to buy a finished product in a store.

Classification of materials for children's outdoor swing for summer cottages, taking into account consumer characteristics

In any case, you need to decide on what to make the appropriate design. The following list provides general requirements:

The cost of suitable materials should be reasonable. When calculating, you need to add up the purchase and transport costs, handling and installation costs.
The finished products will be used outdoors. Consideration should be given to changes in humidity and temperature, direct sunlight, and other external influences.
The reliability of structural elements and joints should not be in doubt. We must remember about static and dynamic loads.
It will come in handy if too careful maintenance is not required for a long service life.
In collapsible structures, special attention must be paid to the strength of the joints. But such products are easier to repair. After the end of the summer season, they can be dismantled for later storage indoors.

Country wooden swing: ease of processing and other advantages

The simplest outdoor swing for children in the country can be done in a couple of hours, no more. After edging, the board will make a good seat. To prevent the rope cables from slipping off, recesses are made in this part. The garden trees should be examined carefully. A strong branch at a height of 2 meters or more from the ground will do. A clamp is installed at the place of installation of the upper attachment, which will prevent contact between the rope and the tree. This will increase the reliability of this node.

For your information! Note that it is easier to establish the correct build sequence by using written documentation.

Video: do-it-yourself garden swing made of wood

Suspended and balancing plastic swing: features of the use of materials

The different designs will be discussed in detail below. But for an objective analysis, it is better to take into account some parameters of different models when studying polymeric materials.

To make such a product reliable, the developers correctly distributed the stiffeners in the most critical places. It can be seen how smooth shapes can be created from plastic, without sharp edges and other unsafe elements. This lightweight structure can be easily moved to the desired location. The wide base of the center section provides good support. This part can be hollowed out to improve stability. Inside, for weighting during operation, you can pour water, or fill in sand.

The ribbed surface of this seat prevents slipping. So that the ropes do not fray, they are passed through special tubes, inserts. They are securely fastened with special blocks with retaining rings. In the lower part, ribs are visible, which increase the rigidity of the structure.

Based on these examples, the advantages and disadvantages of plastics can be formulated:

These materials are used to make cute products for children that are resistant to various types of external influences. Dyes are added to the base of the mixture, so the brightness of the paints is maintained for a long service life.
Polymers are well suited for complex products. With the correct design of the project, a high level of security will be ensured.
Plastic structures, even with large sizes, weigh a little.

The main disadvantage is the relatively low resistance of parts made of cheap hard polymers to strong impacts. One should not forget about the decrease in strength with decreasing temperature.
Also it should be noted the low maintainability. In this case, it is recommended to use adhesive joints only for attaching decorative elements.
Some types of polymers are destroyed by ultraviolet rays, and release allergens and unpleasant odors when heated. It is imperative to take into account possible unfavorable factors when choosing suitable products for a child.

Metal swing for giving: reliability and durability

Metal is heavier than wood and plastic. But it is from it that parts designed for high loads are made. This material is often used to strengthen structures, manufacture the most critical elements of supports and fasteners. The main disadvantage is the need to protect against corrosion processes. It should also be noted the following nuances that will hinder the successful implementation of the relevant project:

It is not easy to make high-quality outdoor children's swing from steel with your own hands. The material is difficult to handle, cut.
To speed up working operations, you will have to purchase drills and hacksaw blades "for metal", tools with powerful electric drives.
You can create a curved pipe shape without damaging the workpiece using a special one.
The manufacture of forged elements and welded joints will need to be mastered. To accurately reproduce these and some other working technologies, appropriate equipment is required.

These comments should be read carefully in order to realistically assess the promise of future action. At a minimum, you will need a preliminary design selection and drawings. With the help of these materials, it will be possible to conclude whether it is worth creating a country swing yourself.

With the help of this figure, you can examine the individual elements:

The most difficult knot here is a special mechanism (I). It provides support and swing of the rocker arm (1) on the axis (11), free rotation 360 degrees around the central shaft (8,9).
The yoke (3) fixes the required position of the ball bearings (4, 5). A removable cover (2) provides protection from dust and precipitation.
The rocker arm is made of 48 x 3.5 tube (diameter x wall thickness in mm). This piece is welded to the cheeks of the bracket (12) with a strip (40 x 5 mm).
We make the support legs from a pipe (33.5 x 3 mm). Frame (15) and handle (13) made of metal bar (12 mm).
For the manufacture of the seat, you can use a wooden board or plywood with a thickness of 10 to 12 mm.

Before assembly, all external surfaces of metal parts, except for bearings and axles, are sequentially coated with a primer and paint. A lubricant is applied to the moving joints to reduce the coefficient of friction and eliminate extraneous sounds. Wooden parts are carefully processed with sandpaper, impregnated with anti-decay agents, and varnished.

For your information! The entire project can be divided into several stages. Some of the simple parts and assembly can be done by yourself. Welding joints and other complex operations are easier and cheaper to entrust to professionals.

From this photo, it is clear that it is difficult to create such a structure at home.Using the video, you can figure out how to make a homemade swing for the street and summer cottages:

Related article:

There are many options for ready-made devices on sale, but it is much more fun to make them yourself. Drawings, dimensions and photos of various designs described in the article will help you cope with this task.

Classification of types of structures for children's outdoor swings for summer cottages

From the examples given, it is clear that a combination of several materials is most often used. This allows you to make fuller use of the existing advantages and, at the same time, reduce the negative impact of disadvantages.

How to make a beautiful and high-quality product will become clear if we consider in detail the different types of swings for children. The following photos with comments provide recommendations for performing work operations and creating individual nodes, examples of completed projects.

The most difficult technological processes are easier to study with the help of such materials. Here, for example, it is described in detail how to weld a frame from a steel corner:

Please note that in addition to a special rectifier and electrodes, you will need gloves, a mask, and other personal protective equipment. Work is carried out in a place specially designated for this, in strict observance of safety rules.To install a suspended structure on a tree, you need to figure out how to fix it so as not to damage the pivot point during operation.

Here the author of the project used a hook with a latch. It provides a secure fit, but does not interfere with dismantling when the need arises. In this example, not only advantages can be noted, but also disadvantages. In the assortment of a specialized store, it is not difficult to select components with a view to certain loads. But the ring and hook at the point of contact will be subject to wear. The paint layer will quickly be destroyed, traces of rust will appear. There is no way to learn how to eliminate squeaks during use with a lubricant.

The easiest way to use such pendulum products. To place them, you just need to choose a flat area in the yard that is suitable in size.

Important! Pay attention to the hardness of the surface in this option. If necessary, special supports are installed under the legs, which increase the support area. You can also use a suitable-sized reinforced concrete slab, or pour a small foundation with reinforced mortar.

Round swing, with a net, is removed to the storage place in the winter season. In the spring, it is enough to check the attachment point. If everything is in order, with the help of a stepladder, such a nest will be brought into working condition in a few minutes.

It is more difficult to figure out how to install stationary street structures. For a large, heavy structure, you will have to create a reliable one. In the calculation it is necessary, especially the soil, the depth of the groundwater. In domestic climatic conditions, in severe frost, the heaving forces are able to push the beam out, violate the correct geometry.

The last two photos are manufactured products. You can browse them and other professional solutions to take advantage of ready-made ideas to implement your own plans.

The following list provides a classification of products of this type according to several main parameters:

Indoor and outdoor models differ in the level of protection from external influences.
Portable swing can be moved to another place, disassembled for storage in the winter season. Stationary structures are designed for year-round operation.
By design, suspended and balancing models are distinguished. There are modifications in each category. Rigid, flexible stretchable suspensions are used. To provide the ability to move in several directions, the support units are equipped with bearings and springs.
Swing with single, paired larger large seats.
Grouping by material is relevant only to the main structural elements. In practice, different combinations are often used: a metal frame, rope suspensions, plastic and wooden seats.

Powerful electric motors drive large swings and merry-go-rounds in amusement parks. For private structures, such equipment does not make sense, because one of the main functions of the corresponding product is the development of the child's physical capabilities.

Below is information about what other designs are and how to build a swing from pipes, rings, and other standard products.

Baby swing

Based on the knowledge gained, it is not difficult to formulate a list of requirements for individual parameters of a future project.

It is necessary to make sure that there is enough free space. With the maximum range of motion, it is necessary to exclude the possibility of contact with walls, pieces of furniture. For this reason, it is not recommended to install rope structures in arches, doorways. It is better to use rigid swing suspensions with bindings that block lateral movement.

Multi-point soft straps are designed to fix the body. Rubber feet prevent the product from sliding on a smooth floor. Padded bar pads prevent injury. Such a swing for the house is quickly disassembled. Therefore, during the summer holidays, you can take them with you to the dacha. But it must be remembered that many of the models of this type are intended for indoor use. Tissue and some other elements will be damaged by precipitation and other natural influences.

This project was created taking into account the peculiarities of a particular interior. It does not imply the ability to move the swing to another location.

But upon careful study of this photo, it is not difficult to find out that such a wooden swing is not too difficult to make with your own hands. Chains, rings, fasteners are standard metal products. Beams and other wooden parts can be ordered from, or you can create your own.

Important! It should not be forgotten that all street structures made of such materials must be protected with special impregnations and varnishes from insects, rain and sun.

Kids rope swing

The board cut to the required size is carefully cleaned, burrs are removed, and the edges are rounded. It is fixed on the ropes with your own hands, choosing a suitable tree branch. The whole process will take no more than an hour using improvised materials, inexpensive carpentry tools.

Swing on chains

A rather heavy structure can be fixed on such suspensions. The maximum permissible loads can be taken from the accompanying documentation for a particular brand of chains.

Welded joints and forged elements are used here. The rigid frame is made of metal. Nice "warm" seat - made of wood. A large translucent polycarbonate sheet protects well from rain and sun. It weighs a little, so it does not create unnecessary loads on the power elements.

How to make a swing from pipes

One of the advantages of this solution is simple assembly. All products exactly correspond to the dimensions specified in the project. The kit includes the necessary fasteners. The table below shows the main characteristics:

In this figure, you can see that the size of the product is set based on the growth of future users.

Do-it-yourself children's swing from plastic parts can be assembled quickly. They are lightweight, highly resistant to atmospheric precipitation, and affordable.

Important! It should be remembered about the limited loading capacity of such plastic structures.

Hoop swing

The following algorithm will help you figure out how to weave a swing yourself:

At the first stage (1), two ropes are fastened with knots on a hoop at an acute angle. A similar component is created on the opposite side with a loop overlap in the center during installation.
The same assembly is installed in the perpendicular direction (2).
Continue filling the free space at different angles (3). All the ropes are pulled with force so that they do not sag.
At the final stage, a circular track is established (4). Fixation points (nodes) are marked with blue dots.

Swing balancer for children

A similar design of domestic production costs from 5500 to 7800 rubles. They offer welded products that must be transported using a suitable vehicle. If you purchase a collapsible kit, you can install it yourself. In the version "for the street" it is supposed to be used intensively, including on public playgrounds. For personal use with comparatively lower loads, the service life is much longer.

Elements of children's country swing

In this section of the site, the individual components of the structures are studied in detail. This data will be useful when choosing component parts for a specific project.

Swing seat

Swing canopy

Different materials can be used to create a high-quality swing for a summer residence with your own hands. The photos below show examples of relevant engineering solutions:

Frame for children's swing

Bearing elements, connections, attachment points must withstand the weight of the structure itself and users without damage. It is necessary to take into account the additional dynamic loads that are generated during the use of the swing. Below are examples of individual engineering solutions that are used in practice in professional and homemade designs.

Where and how to buy a children's swing for a summer residence

Model	price, rub.	Note
Pioneer TK-2	100/35	7300-19200	Outdoor model with basketball hoop.
MSG-01	145/-	12300-14800	Children's complex with swings "nest", double and standard.
Wooden swing	-/-	390-590	Operation indoors and outdoors is possible. The frame for fixing the gimbal is not included in the standard package.
Double space	100/41	15600-17600	Outdoor sports complex.
SET 3	50/-	35000-44000	Gondola set
ROTATING SEE-SAW	50/-	11800-18800	Swing-balancer with a central support for 360-degree rotation around the axis.

When choosing the most economical option, it is recommended to pay attention to the current sales. The widest assortment is offered by trade enterprises in St. Petersburg and Moscow. The simplest set of seat and rope suspension can be purchased inexpensively. The cost of large sets with slides, houses and other additional elements is tens of thousands of rubles.

How to make a children's swing for a summer residence with your own hands

In order not to figure out how to weld a reliable support frame at home, the nuances of other complex operations, you should choose a relatively simple collapsible structure.

This version of the dimensional drawings is selected as an example. It contains all the main components of this type of product. With the following description, you will learn how to build a roofed outdoor summer swing yourself. The knowledge gained will come in handy during the manufacture of a specialized design for kids in the country:

According to the given dimensions, the corresponding parts should be created. Non-standard items can be ordered from a specialized workshop. Chains, hooks, fasteners are purchased in the store. Based on the drawing, you can create a list of required components.
Wooden planks (2) are impregnated with a deep primer and varnished. They create a protective and decorative layer on the surfaces of the crossbars (21) and other metal parts. This operation is not necessary if the product is already protected by galvanizing, or using other technologies in the factory.
You can start by assembling the seat. The corners (3) with stiffening strips (6) are connected into a strong frame. They are fastened with bolts and rivets (5). The planks (2) are fixed with screws (1).
The finished seat is placed in the center of the platform. They start assembling the frame. A square base is laid out of the rods (4). The side rods (7) are attached to it. Stability is ensured using crossbars (21).
The roof support frame (18), the spacer washer (17), the insert (16) and the rod (13) are connected to the upper points in succession. These parts are supported by bolts (20) on both sides. It is easier to perform this operation with an assistant not to damage them.
To fix the normal position, install the bolt (15). Braces (12) strengthen the joints.
The seat is suspended using steel ropes (9), rings (11) and carabiners.

After the assembly is completed, the awning is pulled, the cushions for the garden swing prepared in advance are laid. The design described here will turn out to be quite heavy, so it is better to perform all actions directly at the installation site of the product. The described swing mounts are quite functional. But they can be improved if the upper units are mounted on bearings.

The following photos show examples with comments on making special adjustments to some homemade products for a child.

For your information! The spider web swing works well for the little ones. To increase the level of safety, it is sufficient to increase the height of the walls of the seat.

Save time: select articles by mail every week