Sanding drum. Homemade wood grinder with your own hands Grinding drum for a drilling machine

Hello to all lovers of homemade products, every DIYer who works with wood to some extent probably has a separate device dedicated to grinding, whether on a grinder or manually, but sometimes it happens that the workpiece is round or it needs to be sanded inside . In this article I will tell you how the author made grinding drums with his own hands, with the help of which finishing work will not be a burden.

To make this homemade we need materials such as:
* Wooden planks, their thickness may vary, for an average drum it is 15-20mm.
*Steel rod or ready-made bolt.
* Washers and nuts.
*Sandpaper.
* Joiner's and PVA glue.
* Crowns or so-called annular drills.
* Rubber bands for banknotes.

First step. In order to get started, we need to determine the dimensions of the drum, after the dimensions are selected, we select the crown for the same size. With a crown installed in a drilling machine, we drill 5 round blanks, you can change this number depending on the desired height and the thickness of the blanks themselves.

Second step. Armed with PVA glue, glue the adjacent surfaces of the finished round blanks and clamp them to each other with a vice, observe the gluing accuracy so that one bar does not go beyond the edges of the other. At this stage, the strength properties of PVA glue will be enough.
Wait for it to dry completely, then fasten the bolt in the middle into the drilled hole and tighten it with nuts on both sides, having previously thrown a washer on both sides.

Third step. This step requires a grinder or sandpaper, with the first method it will be easier and faster. We clamp the bolt with the finished drum into the cordless drill and grind it with coarse sandpaper, gradually moving to a finer grit, thereby giving a smooth surface to our drum.

Fourth step. The final assembly stage includes cleaning the drums from the dust that was formed in the previous stage, as well as covering the surface with wood glue for gluing the grinding element. With ordinary scissors, cut out a piece of sandpaper pre-marked to size and glue it butt-to-butt on the sticky surface of the drum, and so that it does not stick out during the drying of the glue, fix it for a while with rubber bands for banknotes.

After that. as the glue dries completely, you can use the homemade product for its intended purpose, try the drums in action.

Everyone who was engaged in construction work, repair, restoration of old doors, windows, window sills, etc., certainly faced the need for the work surface to be even, smooth and sliding. Previously, we picked up sandpaper, if the surface was large, then we strengthened the sandpaper on a wooden trowel and, stocking up on great patience, began the monotonous and monotonous work - grinding. Now, to help professionals and amateurs, a lot of devices have been created, the so-called grinding machines and machines. Using them for certain grinding operations, we facilitate the process of manual labor by shifting some of the simple functions to the machine. Today we will talk about grinding machines that are used to process wooden products.

Purpose, classification and scope of grinding machines

Grinding machines are used to reduce the surface roughness of workpieces, as well as to obtain accurate dimensions. Grinding is usually the final step in the processing of pre-prepared parts.

When working on grinding machines, grinding materials and tools are used.

Grinding materials - special powders, pastes, abrasive skins.

Grinding tools include - cutting, polishing and grinding, circles, bars and segments.

Depending on the purpose, the machines are divided into several types:

Circular grinding;

Internal grinding;

surface grinding;

Specialized grinding machines.

The classification of machine tools is based on the following features:

Type of surface to be ground (internal or external, cylindrical or flat);

Type of parts that this machine can process (cylinders, shafts, rollers, rails, etc.);

Design features of machines (centerless, planetary, two-column);

Features of elements of workpieces (splines, threads, profiles, etc.).

The area in which grinding machines are used is very wide. Recent advances in machine tool building, as well as the production of parts by casting, stamping, rolling, turning and carpentry, make it possible to use grinding machines instead of turning and milling machines (horizontal boring machines). Now grinding machines can perform the following operations:

Cutting and peeling blanks;

Precise processing of various planes, wheel teeth, rotational surfaces, etc.;

Tool sharpening.

Drum grinder: purpose and main elements

Drum grinder It belongs in appearance to surface grinding, in class - to calibration. The main tool of the machine is a grinding wheel, which is made in the form of a cylinder (drum). Usually such a machine is used for woodworking. With it, it is very convenient to grind and calibrate boards, slats and other flat and long wooden parts, such as panel surfaces made of chipboard, MDF, solid wood, veneer, etc.

The main elements of the drum type grinder are:

The bed on which all components and parts of the machine are fixed;

Motor that provides rotation of the grinding and feed drums;

Sanding drum;

Mechanism for changing the frequency of rotation of the feed drum

Desktop;

feed drum;

Protective cover;

Device for dust removal;

The mechanism for changing the height of the grinding drum.

How the drum grinder works can be seen in the video.

Some models of drum-type grinding machines on the Russian market

Today on the Russian market of grinding equipment in the drum grinding machines section products of various manufacturers are presented. The leading place here is occupied by products under the JET trademark. The American company JET, part of the Swiss holding WMH Tool Group AG, today presents the following industrial and domestic drum grinders:

JET 10-20 Plus. Price: 25000 rub.

The drum sander with a full capacity of 500 mm (250 mm x 2) is well suited for a small workshop where free space is highly valued.

JET 16-23 Plus. Price: 37000 rub.

Universal grinding machine with great potential and possibilities: musical instrument production, furniture production, kitchen sets, shop and bar equipment, a wide range of carpentry operations.

Double drum sander JET DDS-225. Price: 160,000 rubles.

Very powerful machine, suitable for operation in production conditions.

The Russian Tool Company Enkor, an official dealer of leading foreign manufacturers of tools, equipment, machine tools, etc., offers the Corvette 57 drum grinding machine manufactured in China. The machine is designed to perform preliminary grinding of flat wooden blanks and bring products to a given size, processing varnished and primed surfaces.

Corvette 57 - drum grinder price: 24100 rub.

The German company Elmos Werkzeuge, a manufacturer of power tools, woodworking equipment, garden equipment, presents its Elmos DS 163 drum-type grinder. Price: 16400 rubles. Designed for use in production as an alternative to manual grinders.

Summing up this brief overview of the grinding machines that are offered for purchase on the territory of the Russian Federation, we can say with confidence that there is a certain choice. You can find machines for use in large-scale production, in small businesses and for use in personal households. As they say: "Any whim for your money."

However, not everyone today is ready to pay a tidy sum for a grinding machine. And the habit left from the time of the Union to do everything from improvised materials and with your own hands, makes modern Kulibins move their convolutions, rustle in the bottom of the barrel and "the eyes are afraid, but the hands do" - to produce a lot of useful and necessary things. Moreover, technologically they are not much inferior to their production counterparts, but in price they are several times cheaper. Below we will see how to assemble homemade drum grinding machine.

DIY drum sander

What it is useful for, we examined above, as well as what it should consist of. Therefore, we take a list of the main elements and begin to look for and collect them. And then let's talk about how to make a drum grinder at home

Engine

Let's start with the engine. The easiest way is to take it from an old washing machine. If it is, then half the work is done. From there you can take the entire electrical part, pulleys and belt.

Making a grinding drum

Now about the drum. It can be made from various materials and sometimes, it would seem, completely unnecessary remnants of repair and construction activities. For example, from wooden rings cut and glued together, or four cylindrical bars, fixed on a metal axis with epoxy glue, or from a paper pipe onto which a linoleum roll is wound.

Here we will consider in more detail the manufacture of a drum from a piece of PVC pipe. For manufacturing, we need: a steel rod 16-20 mm, a piece of PVC pipe with a diameter of 100 mm, a wooden board, screws, rubber, glue. Perhaps everything. The steel rod will be the axis of the drum. We cut off a piece of the required size from the pipe. In length, it is slightly smaller than the rod. We cut out two end caps from wood according to the diameter of the internal section of our PVC pipe. We drill a hole in them for the rod. Plugs are inserted into the pipe and secured with screws. The screw heads must be recessed. We pass our rod through the holes of the plugs and fasten them with epoxy glue. We glue thick rubber on top of the PVC pipe. It will serve as a substrate for the skin and provide it with a better fit to the part. The drum is ready. You can strengthen sandpaper with staples for a stapler or double-sided tape. It is better to glue the tape in a spiral, this will avoid shocks when sanding.

Case and desktop

Wood or 15mm aviation plywood is suitable for the machine body. You can also make a table out of them. We make the case simply and unpretentiously: two side panels, a spacer panel in the middle and a desktop consisting of a base firmly attached to the case and a movable part. The working table must be strong and must not bend when pressing the workpiece against the drum. On the feed side, it can be reinforced with an additional cross member, which will also create a support surface for the adjusting screw.

In order to ensure the adjustment of the stroke of the working table relative to the drum, on one side we fasten its movable part to the base with two hinges or a piano hinge, and on the feed side we screw in the adjusting screw through the middle spacer. It is important to know what the thread pitch of the screw is, then it will be possible to set the required thickness of the part processing.

Installation

We mount the engine in the lower part of the case. We derive its axis through a hole previously made in the body. In the upper part of the body we install a grinding drum. The axis of the drum rests on two bearings in cages, which are bolted to the side walls. We make the holes for the clips a little larger in diameter. So it will be easier for us to align the drum. We fasten the pulleys on the axis of the engine and the drum and pull the drive belt. We mount the wires and the switch. We screw in the adjusting bolts from the bottom and the clamping bolts on the sides, which will support the desktop at the desired height.

The final touch - the case can be treated with varnish or paint, of course, before installation. Now our homemade drum sander is ready for use. For greater convenience in work, you can add a protective cover over the drum to it. Connect the nozzle from the vacuum cleaner to the casing. This will remove the dust generated during operation.

In conclusion. In this article, we tried to consider issues related to drum-type grinding machines. And you make a choice to work on the device purchased in the store or make it yourself.

Sanding various wooden parts is a necessity that everyone who wants to make repairs in their home, or create some kind of decor element with their own hands, faces.

Of course, you can sand small parts with ordinary sandpaper, but to cope with a large amount of work, you should change the sanding to a grinding machine. It will help to significantly save time and quickly bring the part to the appropriate form. One of these useful devices is a drum grinder.

Classification and structure

Drum-type grinding devices belong to the calibration class machines. Such a grinder is most often used for woodworking, but other materials can also be processed with it.

Cylindrical grinding wheel (drum) allows you to calibrate boards and rails of various lengths and configurations. The workpiece can also be made of different materials: chipboard, veneer, etc.

The structure of the grinder:

Cylindrical grinding drum.
Feeder.
Dust extractor.
Working surface.
Drum speed converter.
The motor that drives the grinding cylinder.
A bed for fastening the key components of the machine.
Drum height adjuster.
Operator protection device.

Here are the main elements of the structure of the drum machine. Depending on the specific model of the device and the specifics of its purpose, the configuration may vary slightly.

Main device models

Drum-type machines can be purchased ready-to-use. There are several of the most popular and widespread brands for the production of these devices. It makes sense to present their individual models.

JET company. The American company specializes in the production of modern machine tools of various types, including drum machines. In the line of its products there are several grinding machines with a cylindrical shape of the working circle.

JET DDS-225. This machine is one of the most powerful devices of this type in the manufacturer's line. It is used both in home workshops and in small industries. A characteristic feature is a double grinding drum. The cost of this machine is appropriate - from 150,000 rubles.
JET 10-20 PLUS. A compact sanding device that allows you to process up to 50 centimeters of surfaces. Perfect for small home workshops. The cost does not exceed 25 thousand rubles.
JET 16-23 PLUS. It is considered one of the most versatile machines of its type. It is used to process building materials, kitchen appliances and even musical instruments. Most often, such a machine is used in small furniture manufacturing enterprises.

Corvette 57. A Chinese-made machine, which is distinguished by a rather high build quality and wide functionality. The machine is designed for grinding flat surfaces of wooden blanks and turning parts to the required dimensions. The machine has a fairly affordable price - 24 thousand rubles.

In addition to these machines, there are also good options from German manufacturers. It is worth noting that, depending on the price, German companies also offer appropriate sets of features for their devices. The minimum amount for which you can purchase a grinding machine in the basic configuration is 15-16 thousand rubles.

Video: step-by-step production of a drum grinder.

How to make a grinding machine with your own hands?

If it is not possible to shell out a fairly round sum for a decent version of a drum grinder, then you should try to make it on your own. For a person who is well versed in mechanics, this is not too difficult a task. In addition, this way you will be able to save significant financial resources.

In order to assemble a drum grinder at home, you need to acquire the following parts:

Drum grinding. A cylindrical fixture can be created on the basis of "garbage" building materials. For this purpose, even pieces of wooden bars are often used, which are evenly attached to a special metal axis with glue. In this case, special attention should be paid to the tightness of these bars to each other. Also, the drum can be made on the basis of a PVC pipe with a diameter of up to 10 cm, which is put on an iron rod with a diameter of 1.5-2 cm. It should be slightly shorter in length than the rod itself. We insert special plugs with holes for the rod into the ends of the pipe. We recommend fixing the plugs with screws. We pass and fix the rod. We wind a dense layer of rubber onto the pipe, on which sandpaper will be attached.
Engine. It is best to use a working motor from an old washing machine (as well as pulleys, belts, etc.). The optimal motor power should be between 200 and 300 watts. It is desirable that the motor also be asynchronous and single-phase. The rpm level is 2000-3000.
Frame. By design, it should be simple and convenient. It is best that the body of the machine consists of two side panels, spacers and the actual table itself. Particular attention should be paid to the strength and rigidity of the working table, which should not be deformed when the workpiece is pressed onto the drum. The desktop should consist of a base and a movable part.

After the main parts of the machine are assembled separately, you can proceed to the final assembly of the entire apparatus. First of all, you should attach the motor to the bottom of the machine body in place of the pre-drilled holes. The grinding drum is installed in the upper part of the housing and is attached to two bearings that are located on the side walls of the housing.

Then we attach special pulleys to the drum and motor and pull the drive belt. After all the necessary preparations with electrical wires, we fasten the desktop with special bolts that will keep it at the required level. Experts strongly recommend mounting a protective cover on the machine.

It is worth noting that the independent creation of a drum grinder is also not without certain costs. This is primarily about your time, but the machine will cost you less than the factory machine only if you have a working motor. Without an engine and certain skills, it is almost impossible to create a cheap analogue of a branded machine.

The vast majority of grinding operations in everyday life are carried out manually or using a drill. This is understandable. Buying expensive specialized equipment for use at home, where grinding operations tend to vary greatly in appearance, is not always advisable.

There are various devices for manual and mechanized grinding. All of them can be divided into two main types.

Tools that directly process the part itself are hand-held devices, which include grinding blocks (blocks, bars) and grinding attachments for a drill or grinder, which are all kinds of support plates and drums.
Devices that provide the necessary position of the grinding tool relative to the part - guides, support surfaces, etc.

Dust removal devices can be attributed to a separate type, which, due to the abundance and harmfulness of grinding dust, should also not be neglected.

Hand sanders

When working manually, a variety of grinding devices are used to ensure the necessary processing parameters.

The simplest hand-held devices include sanding pads, which can be named: sanding blocks, sanding bars, etc. Depending on their shape, they can process both flat and shaped surfaces.

The sanding block consists of three main elements - a body with a working surface on which the sandpaper is stretched, a clamping mechanism that fixes the sandpaper on the block, and a handle to which force is applied during grinding. The latter may be absent as an independent element, in which case its role is played by the body. The clamping mechanism can also be replaced by other elements that perform its function, for example, or Velcro.

Many types of branded pads are produced, differing from each other in the shape and method of attaching the emery skin. The body is most often made of plastic, the working surface of which is covered with a soft material that helps smooth out bumps.

The simplest sanding pads are easy to make yourself. Wood is the best for this. It is advisable to paste over the working surface or upholster it with a soft material, such as felt.

The simplest design of the bar consists of two pieces of board or chipboard, fastened together with screws - so that the skin fits the lower piece, and its ends are clamped between the parts.

With a little more effort, you can make a more functional bar in which the skin will be clamped with a wing nut, which is much faster and more convenient than using screws for this.

For processing large surfaces, if for some reason a power tool is not suitable, it is best to make yourself a grinding "planer". Its possible design is shown in the figure below. It is so simple that it needs no explanation. The dimensions of the device are determined by the specific working conditions - the parameters of the processed plane and the physical data of the worker.

Grinding "planer"

For grinding edges that are at an angle of exactly 90 ° to the adjacent surface, a tool that allows you to provide the required right angle will be useful. It is shown schematically, the specific implementation can be any.

Device for grinding edges (end view): 1 - base, 2 - handle, 3 - side stop, 4 - stiffener, 5 - sandpaper, 6 - strip of felt.

One of the main tasks in the manufacture of homemade bars is the reliable attachment of the skin to them. In addition to mechanical clamps (using screws, nuts, etc.), other methods of attaching sandpaper can be used in homemade sanding bars.

You can just nail it on the ends with small nails. The method is easy to implement, but inconvenient if you have to change the skin often.

An acceptable way to secure sandpaper is by gluing it. Adhesives are suitable for this, making it relatively easy to separate the skin from the base when replacing it.

Sometimes the skins are fastened with wedges. Cuts are made in the bar, into which the edges of the skin are tucked and wooden wedges are driven. Cuts and wedges can be of various sizes.

Devices for drills and grinders

Manual grinding requires a lot of effort and time. With significant amounts of grinding work, it is advisable to use a power tool - a drill or a grinder, in particular. To turn the latter into a grinding tool, they must be equipped with a suitable grinding attachment - a backing plate or a drum.

Sanding pads. These nozzles are a disk of plastic or rubber, to which an emery cloth is attached in the form of a circle. Plastic plates have a soft or not very soft layer between the base and Velcro, for better adhesion of the skin to the surface to be treated. The plates for the drill have a shank in the form of a rod, for angle grinders - a thread for screwing them onto the output shaft of the angle grinder. The grinding attachment for the angle grinder can be converted into a drill attachment by screwing an adapter with a shank into it.

But due to the rigidity of the attachment for the grinder, a strictly vertical position of the drill relative to the plane during grinding is practically impossible. When using a rigid cymbal (flexible is easier to work with), any slight tilt will cause the rim of the cymbal to bite into the workpiece and the drill will try to get out of hand, resulting in more angulation and deeper digging into the edge of the circle. This results in well-marked depressions on the machined surface. Therefore, only grinding attachments that can compensate for the tilt of the drill are suitable for the drill: either rubber, or with a thick soft layer between the plastic base and Velcro, or with a movable pin mount.

Rigid cymbals are only suitable for working with a fixed drill, such as shown below.

If you can’t find a suitable nozzle for a grinding drill on sale, and there is a hard nozzle, then you can make a thick soft layer between the plastic base and Velcro with your own hands.

Velcro is carefully cut off with a clerical (construction) knife, and a large round sponge for washing the body is glued as a soft layer. When the sponge is compressed during the grinding process, the symmetry may be broken (the Velcro with the skin is shifted in one direction), but at the speed of the drill (3000 rpm) this is not critical, it will probably not work with the grinder.

Combined nozzles for grinding on a drill are produced, in which the shank can be in two positions relative to the working surface - be rigidly locked with it or have a degree of freedom (unlocked). In the latter case, the working surface of the tool has the ability to adapt to the inclination of the drill, so that the processing is obtained without the formation of recesses. But the price of such devices is close to the price of orbital sanders.

To make the shank movable, the flare nut is twisted (in the photo below with a similar device, it is twisted to the cartridge).

The skin is attached to the plates with Velcro. This method of fastening requires a special sandpaper, on which a Velcro backing layer is applied.

Sanding drums. Grinding drums for a drill are a cylinder with a shank, sanding paper is fixed on the cylinder in the form of an endless tape (an emery cloth tape glued with ends) or a strip of sandpaper with free ends. In contrast to the support plate, in which the working surface is located perpendicular to the axis of rotation, for drums it is located parallel to it.

In order for the skin to sit tightly on the drums, the latter have various tension mechanisms. According to the principle of operation, there are two of them - increasing the outer diameter of the drum (used for an endless belt) and tensioning the abrasive belt using a special mechanism (used for open belts). The increase in the diameter of the drums is implemented in different ways - by pumping them up (for pneumatic models), by axial compression (for drums with rubber elements). The tension of an open tape can also be performed in different ways. This is most often done with a rotating screw that tightens the ends of the sandpaper. Below are several options for drums with different types of skin tension.

The drum for endless belt sanding can be made by placing rubber spacers between wooden discs. When the axle bolt is tightened, the rubber is crushed, expanding in the radial direction and securely fixing the sanding paper put on the drum.

Grinding fixtures using a drill. Grinding parts with a plate or drum, holding a drill in your hands, is not as easy as it might seem to someone who has never done it himself. In many cases, a better surface can be achieved by holding the tool stationary. Particularly when machining small parts that are easy to handle by hand. There are grinding devices that allow you to fix the power tool, making it completely or partially stationary.

You can use branded drill guides, which are mainly designed for drilling, but can also be successfully used for grinding - mainly with a drum. There are two ways to work with them. By fixing the drill in the guide motionlessly and moving the workpiece relative to the tool (photo A below), or by moving the guides together with the drill relative to the workpiece, pressing the support surface of the guides against the latter (photo B below). In both cases, the tilt of the drum is eliminated, which ensures that the surface is processed at the desired angle.

You can independently make the simplest two-board grinding device, which allows you to ensure that the angle of the grinding edge with respect to the main surface is exactly 90 °.

Dust removal. When sanding wood, a lot of dust is generated, which not only creates inconvenience, but also harms health when inhaled. Dust needs to be dealt with. The easiest way to do this is to suck it up with a vacuum cleaner, placing the hose close to the grinding area.

When using the content of this site, you need to put active links to this site, visible to users and search robots.

Every person who has had to deal with wood processing knows the importance of the final polishing of the finished product.

This also applies to holders for various agricultural implements, and wooden furniture, and building elements (doors, windows, window sills) and any other wood products. Sanding allows you to remove burrs, as well as bring smoothness and shine to the wood.

Of course, grinding work can be done with a regular piece of sandpaper or a special attachment for drills or angle grinders. But this takes a lot of time and does not ensure the ideal shape of the product. Therefore, for such purposes, various grinding machines were created.

Most often, in domestic conditions and in small-scale production, a drum grinding machine is used, the device, the principle of operation and the possibility of making it with our own hands, we will consider in this publication.

1 Drum grinder - device, principle of operation

The drum grinder got its name from the rotating cylinder - the drum, which, in fact, performs the function of grinding.

In addition to the grinding itself, which allows you to remove burrs and give the wooden surface a perfect smoothness, such devices also perform a calibration function. Drum grinder or any other type allows you to adjust the wooden part to the desired dimensions with millimeter precision.

This machine is used for finishing sanding and grading of flat and long wood products, such as wood panel surfaces, chipboard, fiberboard, etc., doors, window sills, and so on. The use of such a device for processing cylindrical parts is not possible.

1.1 Main components

The drum grinder has no fundamental differences from any other machines in terms of appearance and set of main components.

The basic package of such a device includes the following elements:

The bed is the part of any machine to which all other elements are attached.
The engine performs the function of driving the moving parts of the machine. Most often, drum sanders for wood are equipped with two motors. One rotates the drum itself according to the principle of a drill, the second sets the feed tape in motion.
Grinding planer drum, on which the emery belt is wound and attached. It is necessarily equipped with a tensioning mechanism, with the help of which, when the tape is heated, it is automatically tensioned. The rotating drum with sanding belt directly smoothes the woodwork.
Feed drum with conveyor belt. This part of the woodworking machine produces independent wiring of a wooden product on the grinding drum. Due to the flat surface of the conveyor and the same distance from the belt to the drum along its entire plane, the product is evenly adjusted to the desired dimensions.
The mechanism that regulates the speed of the conveyor belt.
Fixing racks of the grinding drum, equipped with a ruler. The ruler and screw fixation on the racks allow you to set the required thickness, under which the product must be adjusted.
The protective cover covers the grinding drum to prevent injury during operation.
Machine for removing dust and chips.

1.2 How it works

Such a grinding machine works on the principle of a drill. Its grinding part rotates the engine at high speed - an average of 2000 rpm.

The sander can have different weights, different sizes, sanding drum length, conveyor belt length and width, maximum and minimum drum installation height, etc.

The choice of technical parameters of the device depends on the functions for which it is purchased.

After installing the machine, you need to calibrate the grinding drum to avoid eccentric rotation and unnecessary vibrations. In addition, a non-centered drum will not be able to clean the products evenly.

To do this, we take two beams of the same height, install them on the feed belt, lower the drum on them and fix them in this position. Next, set the height of the mechanism, depending on the size of the part to be ground.

We turn on the installation. For the first pass it is better to set the minimum speed of the feed belt, for the final - the maximum - 3 meters per minute.

The grinding drum should gain momentum, like a drill. After that, we put the wooden beam that needs to be processed on the conveyor belt. The passage of the beam under the drum occurs automatically.

We repeat this action the required number of times until our part comes into the desired shape and acquires the specified dimensions.

If the sides of the product are of different sizes, the height of the drum must be adjusted for each change in parameters.

2 Types of machines

If we talk about grinding machines in general, their classification is based on two parameters: the scope and the functions performed.

According to the field of application, the machines are:

circular grinding machines. Are intended for processing of the details having round section;
surface grinding. Their task is to grind flat parts. The drum machine also belongs to this type;
internal grinding. With the help of such mechanisms, the internal surfaces of the product are processed. Drills are often used for this purpose;
specialized. Designed for processing complex surfaces - threads, grooves, teeth, etc.

Different machines can perform different functions:

pruning and cleaning;
sharpening;
grinding.

2.1 We make a drum machine with our own hands

It is difficult to make a drum grinder for raw wood with your own hands, but it is quite possible.

To do this, we take a list of necessary elements and look for suitable material and spare parts.

And so, we need:

Bed. For these purposes, any stable workbench or table is suitable, to which other elements of the machine can be screwed. It is better if the bed is metal. If you have to use a wooden structure, you need to strengthen it with your own hands.
Electric motor with a power of 200-300 watts. The speed should be 1500-2000 rpm. It is better if it is a single-phase asynchronous motor. For these purposes, a mechanism from an old washing machine is suitable (in this case, we take pulleys with a belt from it), drills, grinders, etc.
Sanding drum for wood. This is perhaps the most important and most complex part of the machine, on which the quality of the work performed will depend. We will talk later about how and from what to make a home-made grinding drum with our own hands.
Drum stands. The device that fixes the drum and regulates its height can be made of wooden beams. The height adjustment mechanism can be made by hand in two versions. The first option is through holes on the racks through which the drum will be attached. This option is simpler, but it only allows you to work with a fixed adjustment step of about 1 cm. The second option is long screws mounted perpendicular to the drum. In this case, by tightening the screws, we will be able to raise the grinding device, releasing - to lower it. In the second variant, height adjustment is possible with an accuracy of up to a millimeter.

We will not make a conveyor belt with our own hands. It's possible, but not necessary. Feeding on homemade machines is usually done manually.

2.2 Making a drum

Before proceeding with the manufacture of the drum itself, you need to clearly understand what functions our machine will perform. The fact is that the smaller the size of the cylinder, the easier and faster it will be rotated by the engine from the drill.

To make a grinding drum, we need a piece of anything that has a cylindrical shape, the desired length and diameter. It can be a wooden beam with a round section, a PVC pipe, a metal pipe and much more.

We will consider a PVC pipe as a material for making a drum with our own hands.

We take the segment of plastic pipe that is required in size. We also need a metal pin that acts as an axis, wooden or plastic plugs that match in diameter with the inner diameter of the pipe, self-tapping screws, rubber, glue.
We take the plugs and make holes in them that correspond in diameter to the thickness of the rod.
Holes in the plugs must be exactly in the center. The slightest eccentricity of the drum will lead to incorrect operation of the machine.
We tightly plant the plugs into the pipe and fix it with self-tapping screws.
Insert the pin into the holes in the plugs. The axis should protrude from the cylinder by 2-3 cm on each side. It is she who will act as an attachment to the adjusting racks.
We glue rubber on the drum. To her it will be easier to attach the sanding belt.

2.3 Assembling the machine

To assemble the machine you need:

Install the racks on the frame.
Attach the drum to them so that the height of its rise can be adjusted.
Connect the motor to the drum using a belt or chain drive.
You can get to work.