How to make an indoor fountain at home with your own hands? Home fountain - DIY making. Making home fountains.

By making a do-it-yourself indoor fountain at home, you can not only save a fairly large amount of money, but also purchase a useful interior decoration. According to the Chinese teachings of feng shui, the symbol of Water, located in the northwestern part of the dwelling, provides wealth in the family. A babbling stream, a cascade of waterfalls or another form of a fountain can be a wonderful personification of a moving element in a house.

Small decorative cascades for interior decoration should be made taking into account the fact that there is nowhere to drain the constantly arriving water at home. This means that the amount of liquid that is in the system must be constant. To comply with this requirement, the fountain installed in the room must be made to work in a closed loop. In this case, water will be collected in a storage tank. The pump installed in the system must raise it to the highest point of the structure, from where the liquid will pour out, again falling into the tank.

In order for a thin stream to flow down beautifully, drip or beat upwards, decorative obstacles should be made on its way from shells, stone, shards or other objects. In ancient China and Japan, specially trained craftsmen built the channel for the stream so that it gurgled beautifully. Adjusters of the "music of water" created real masterpieces from ordinary stones, laying them so that cascades with depressions were formed, into which drops and trickles fell, producing a noise characteristic of a stream or waterfall.

What to prepare for work?

To create a mini fountain, you need to choose the right pump. Its power depends on the height to which the liquid needs to be lifted. This value is dictated by the dimensions of the structure and is determined individually. If you want to make a fountain with your own hands so that the stream of water hits upwards, it is better to buy a pump with more power and a regulator. To assemble a small tabletop cascade, an aquarium pump is sufficient to filter the water.

Before making a do-it-yourself fountain, you need to prepare:

• a reservoir into which water will drain;
• silicone tubes;
• waterproof glue;
• materials for decorating the product.

The bowl of the tank must be large. In addition to its direct function of collecting liquid circulating in the system, it will also serve as the basis for a composition made of stone or other materials. Some of them can be placed directly in the container.

What if there is no pump?

A low-power pump that can raise water to a height of about 20 cm can be made by yourself. For this you need:

• a motor from a child's toy, camera or other, protected from water ingress;
• batteries (from a telephone or finger-type);
• charging connector if a mobile phone battery is used;
• LEDs - optional;
• switch of any type;
• electric wires;
• plastic gear;
• small round container (aerosol cap, plastic bottle);
• waterproof glue.

Make an impeller for water supply from a gear from an unnecessary mechanism: adjust the wheel to the diameter of a round container, glue 4 pieces of plastic crosswise to the shaft: Fig. eleven). Drill a hole in the bottom of the container for the motor shaft, and in the side for water. Lead the motor shaft inside the container, glue the motor housing to the bottom of the pump reservoir from the outside, and fix the impeller to the shaft inside (2). Cut off a piece of plastic, make a small hole in it, glue the open part of the pump body. Attach a tube to the hole in the side and seal the connection (3). Lead the wires to the motor and carefully insulate the connection, protecting it from water. Any sealant is suitable for this.

Use the diagram (4) to mount the motor connection to the power supply. It is important to remember that the batteries must be kept away from moisture. You can fix them on the outside of the pool, and the switch can also be glued here.

The circuit can include a resistor to adjust the speed of the motor or LEDs for decorative lighting.

Assembly technique

A homemade or commercial pump must be attached to the bottom of the tank (storage tank). Its depth should be such that the pump is completely submerged in water. You can hide the pump in different ways: place a mesh cover on top of it, on which pebbles or shells depicting the bottom of the reservoir will be laid, or hide it inside a large decorative element. One of the design options - a dry fountain - provides for a completely hidden water surface in the reservoir. To do this, lay a lattice on top of it and fix the stones. The water will pass through the stones into the container without forming a visible pool. Rice. 2.

How to make a mini fountain in an apartment with your own hands from ceramic pots (Fig. 3), a small master class will tell you:

1. 1 Prepare 2 ceramic pots and 5 trays (2 large and 3 small). Cover them with waterproof varnish, drill a hole for the tube in the center of 1 larger and 1 smaller pan. Make cuts at the edges of the pallets to allow water to drain off.
2. 2 Install the pump on the bottom of the tank, following the diagram in the figure. Close it with a large-sized pot, and lead the pipe through its drainage hole and drilled holes in the pallets to the very top of the structure.
3. 3 Place the smaller pot next to it and attach the pallet to it. The next tier consists of 2 small trays (one is inverted and serves as a base for a bowl from the other). The pallets must be placed so that the holes sawn in their sides allow water to flow from one to the other, forming a cascade.
4. 4 Decorate a do-it-yourself fountain, assembled from the simplest materials, with beautiful stones, plants and shells, figurines of aquatic animals or birds.

Such a miniature pond can be placed on the table or given a special corner among indoor plants. The iridescent water will not only revive and decorate the composition, but also allow it to humidify the air a little.

Waterfalls in the room

Stylish and fashionable interior decoration is a vertical waterfall (Fig. 4). It is not much more difficult to make this kind of indoor fountain with your own hands than a mini tabletop fountain. The only difference is the pump power for such a large structure. When looking for a pump, you need to pay attention to the fact that the height of the water column is at least 1.8-2 m. This will make it possible to arrange a water wall or a stream originating from the ceiling of the room.

Before making a home waterfall, you need to waterproof the floor in case of a tank leak. For this, a plastic wrap can be used. It is advisable to cover a section of the floor with it by 15-20 cm more than the perimeter of the future structure.

For a panel on which water will flow, you will need:

• thick glass or mirror;
• bars 5x5 cm for support posts;
• boards for the base of the top cover;
• plastic pipe with a diameter of 2 cm for water distribution over glass;
• a block or thick board for the stopper step.

The device of the fountain supply system is the same as described above.

On top of the fountain pallet, you need to install and fix a board with a stop to fix the glass in a vertical position. Knock down the frame from the support bars and the crossbar from above. The horizontal strap of the top cover can play the role of the crossbar.

Drill a piece of plastic water pipe, the length of which is the width of the glass panel, along one line along the axis. The holes should not be too far apart to give the impression of separate streams. Plug one end of the spray tube, secure it to the top cover strip. Install backlight if necessary.

Place the glass panel vertically with the lower edge resting on the latch step. Attach the side pieces on liquid nails to the support bars. In order for the water not to spread beyond the panel, on its edges you need to glue the sides made of strips of glass, wood, plastic.

Install the pump in the pan, lead the water supply pipe up to the open end of the distribution pipe. Connect, seal the connection. Hang on the front section of the top cover. Decorate your home fountain with your own hands according to your own taste. Through many holes in the sprinkler pipe, water jets will hit the glass and flow down it into the sump, creating the illusion of a falling stream.

Materials for decorative finishing of indoor fountains, made in a tabletop or floor version, can be found in pet stores (colored soil, castles, shells, ships in the aquarium department). Flower shops sell bamboo plant supports and beautiful containers. In the souvenir departments you can find artificial bonsai, figurines of birds and animals.

There is nothing more pleasant than to relax after a hard day under the quiet splash of water in a man-made stream. The decorative functions of the fountain are perfectly combined with its main purpose - to humidify the air in the room. Live indoor plants can be added to the streams of flowing water.

In specialized stores today you can buy very original. The assortment of such goods is quite large, as they say, for every taste and color. Many people like it when they hear the murmur of a small trickle of water in the house. These sounds allow you to relax and unwind after a hard day at work. However, most consumers do not know what can be done. In this case, special costs are not required, as, indeed, knowledge.

Material for construction

So, below we will describe how to make a fountain at home. To create an original design you will need:

1. Glue.
2. A container that will serve as the basis for the fountain.
3. Approximate scheme of the fountain
4. Large sink.
5. A small piece of hose commonly used for cleaning aquariums.
6. Polyethylene film.
7. Expanded clay, decorative multi-colored soil and shells of various shapes and sizes.

The large shell will serve as the centerpiece of the entire composition. A pump and a hose are needed to pump water, and multi-colored soil, shells and expanded clay are needed for decoration. You also need a small piece of plastic wrap. So, expanded clay can be purchased at any flower shop. As for the black, red soil, it is better to use a special mixture for aquariums.

We select the capacity

A home fountain must be strong enough and beautiful at the same time. Therefore, the container for its base should be selected more carefully. The first step in making the structure is the selection of the vessel. For the fountain, in this case, you can take a pots for flowers. If there is no such container, then you can use a flower pot, a beautiful basin, a clay vase, and more.

The most important thing is that the vessel does not leak. If, for example, there are holes in a flower pot, then these should be repaired with epoxy glue.

Choosing a pump

Since everyone can make a fountain at home, it is worth paying special attention to the pump. After all, not everyone understands them. There are several with a spray bottle at the tip and a regular one. In this case, the first option is not suitable. First of all, splashes can get outside the main container. And one more thing - we have a completely different idea.

Therefore, to make a mini-fountain with your own hands, an ordinary pump will be enough. You can make the tip yourself. In this case, the pump should simply raise the stream up.

First step

So, how to make a fountain at home at no extra cost? First, cut off a small piece of hose, about 10 centimeters long. After that, you need to put it on the pump tip and see if the hole in it is completely open. The power of the jet, which will be supplied to the fountain, depends on this. The finished structure should be installed at the bottom of a previously prepared container.

The home fountain in this case will be with a large sink in the center. It is from it that the water will flow. Therefore, it is necessary to make a hole in the sink that will fit the hose in size. This can be done using a conventional drill. Of course, the sink should be drilled carefully so that its walls do not crack.

Stage two

The scheme of the fountain is quite simple. With its help, everyone will be able to assemble a similar decoration for their interior. When the pump is installed in a container, you can fill in expanded clay, which must be covered with polyethylene from above. A hole for the hose should be made in the foil in advance.

Polyethylene is necessary so that expanded clay does not float when wet. Indeed, water will be poured into the container. After that, multi-colored aquarium soil should be poured onto the film.

Sink stand

The composition will not look good if the main element is simply set on stones. Therefore, a neat stand should be made. So, how to make a fountain at home, which will not only soothe with the pleasant sounds of flowing water, but also be a great addition and highlight of the interior? You can create a beautiful stand from pebbles. They can be held together with epoxy glue. When making the stand, do not forget about the hole for the hose.

Assembling the structure

When the stand is ready, pass the hose through it. If it is too long, then it needs to be shortened. Otherwise, it will be visible where the water is pouring from. Now you can install the main element - a large sink. Pull the hose only one centimeter into the pre-drilled hole.

That's all, it remains to decorate the fountain. To do this, put some shells around the sink and put the most beautiful stones. All this can be purchased in the store - for lovers of aquarium fish or in a gift shop.

If there is no large shell, then it can also be replaced with any suitable item. The main thing is that a hole for the hose can be made in it. The design of a decorative fountain for a room depends entirely on the imagination of its creator.

The final stage

After the composition is completely folded and all its elements are fixed, water must be poured into the container. It makes no sense to completely submerge the soil. So the fountain will lose its main idea and its charm. The most important thing is that the pump is completely hidden under water.

Now you can turn on the fountain. To do this, you need to plug the cable from the pump into the outlet.

That's all, the homemade fountain for the room is ready. However, it is worth remembering that the water will gradually evaporate from it, especially in the hot season. Therefore, it will be necessary to add liquid to the decorative fountain at least once a week. More often if necessary.

You can mask the cable from the pump going to the outlet. Alternatively, the indoor fountain can be decorated with artificial flowers. This will give the composition a more dramatic look.

Finally

Now you know how to make a home fountain. It does not require high costs and special talents to create it. Enough to turn on the fantasy. It does not take much time to make such compositions, but they will delight you for more than one year.

The intense rhythm of our life presupposes periodic rest, both physical and moral, and there is nothing more pleasant than sitting in silence, enjoying a beautiful view and pleasant sounds.

For this purpose, decorative fountains for an apartment may be suitable, which fully meet all these requirements.

After all, there is nothing more pleasant than listening to the sound of murmuring water and looking at the pouring fountain. And to build it in an apartment, even if small in size, is a completely solvable task.

In addition to the listed useful properties of this structure, the fountain in the apartment is a good air humidifier.

In contact with

classmates

Types of mini-fountains at the place of application

Small home fountains can be divided into several types. At the place of application, they are divided into country and indoor fountains. It is clear that a country fountain, in most cases, is installed on the street, and a room fountain in a city apartment. The country fountain is made in large sizes and it is important to choose the right place for its installation.

Do-it-yourself decorative fountain in an apartment video:

Place for installing a country fountain

When choosing a location, it is important to observe three important conditions:

1. It is highly undesirable to install near trees. First, growing roots can damage the fountain bowl and its waterproofing. Secondly, falling fruits and foliage can also disrupt the water supply system and bowl.
2. If the fountain is installed in open areas, then water bloom may occur, due to the direct hit of the sun's rays.
3. If the fountain is installed in the immediate vicinity of the house, then additional dampness may form on the building during windy weather, due to the drift of water droplets from the fountain towards the house.

Classification of fountains by the type of falling water

By the type of falling water, the decorative fountain can be divided into several types.

1. Waterfall. This view has a falling water protrusion design. It has a beautiful appearance and is most commonly used.
2. Cascade. The installation scheme is the same as for the first type, only it consists of several streams of water. The liquid in them pours over thresholds or inclined ledges.
3. An ordinary fountain, made in the form of a jet spraying upward and spraying spray around itself.
4. Fountains in the form of streams and lakes. They have an original appearance and are becoming more and more popular.

DIY indoor fountain

Looking at the decorations of some of the fountains, it seems that their production and installation are very difficult to execute. Yes, there are structures that are quite cumbersome, and their installation will require serious professional skills and knowledge from you, but a small mini-fountain with your own hands can be made by almost every person who has simple skills in construction and installation work. In addition, you will create a design based only on your preferences and taste, which is most suitable for your home interior. In addition, you will significantly save money.

Materials and tools

So, if you still do not know how to make a mini-fountain in your apartment, then read our step-by-step instructions. Before starting this work, you need to purchase the necessary materials and tools.

• Capacity for the fountain. This can be a basin, a flower pot, or something else of your choice.
• The hose used to clean the aquarium is about 10 cm long.
• Polyethylene with dimensions slightly larger than the container.
• Waterproof glue, expanded clay.
• The pump used for the aquarium.
• Medium or large shell, and stones or pebbles to strengthen it.
• Small seashells and colored soil used for decorations.

The bowl for the fountain, which we choose, needs to be checked for cracks and holes, in order to prevent, in the future, leaks.

Fountain materials

Installing the pump

If you are making a tabletop fountain, then first you need to find a hose for work through which a stream of water will come out. To do this, cut off 10 cm from a regular aquarium hose and insert it into the pump. Check immediately if your system is in working order so that you do not come back to this question later. We install the pump to the bottom of the container and fill it with expanded clay. Do not forget to level the surface after backfilling.

Final work

After you have filled in expanded clay, you need to cover it with foil, after making a hole for the hose. Then we pour decorative soil onto the film.

Note!

For a sea shell, it is advisable to make a base of stones and fix them to the shell using waterproof glue.

The next step is to push the tube through the stones and the sink, after making a hole in it. The end of the hose should protrude about 1 cm from the sink. The surface of the fountain should be decorated with stones and sinks at your discretion. Thus, you saw that a tabletop fountain with your own hands can be made without spending significant effort and money.

Advantages of a fountain without a pump

If you think that when constructing fountain structures it is imperative to use a mini-pump for a fountain, then you are wrong. You can make a small fountain without using a pump, while it will work exclusively thanks to the laws of physics.

Yes, in these designs there are some restrictions on the power of the jet, but you do not have to spend money on electricity and deal with the purchase and connections of the pump. You need to know that such a fountain should not be large, otherwise you cannot do without a pump.

Decorative fountain

How the fountain works

Such a fountain will work on the principle of communicating vessels, with only some peculiarities. They need to be placed on the same level, connected with two pipes. It is better to take plastic containers and preferably of the same volume, and tubes, with a minimum thickness, for a longer trouble-free operation of the fountain. The tubes are inserted into the bottom of each vessel, into pre-drilled holes, which must then be sealed.

Backlit fountain

Final assembly and installation of the fountain

In order for such floor fountains to work without a pump, you need to use a third vessel, equal in volume or greater than the previous two. To this vessel, in the walls, closer to the bottom, make two more holes, where you insert the two ends of the tubes from the smaller containers.

We also tightly seal the inlets of these tubes, and insert a T-shaped adapter into the bottom of a large vessel. After that, the construction of your fountain is considered complete. You just have to arrange it according to your taste, preferences and combination with the interior of the apartment.

Garden fountain

Where can apartment fountains be installed? As you probably already understood from the above, there are various types of fountains for an apartment. In addition, they can be installed not only on the floor, but also on a table and even on a wall.

Note!

Tabletop constructions are usually the smallest in size and can even be placed on bedside tables and windowsills.

Floor fountains depend on the size of your apartment and can be quite impressive in appearance. Wall fountains look like real works of art and have a panoramic view or a painting.

Their installation and manufacture, of course, is more complicated and requires much more skills and material, but with the successful performance of your own, you will get indescribable pleasure contemplating on them.

Watch a video on how to make a decorative fountain in an apartment with your own hands:

In contact with

Do you see inaccuracies, incomplete or incorrect information? Do you know how to make your article better?

Do you want to offer photos on a topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Today you can start building a small fountain at your summer cottage. We will show you how to do it simply, beautifully and inexpensively.

Varieties of fountains

A fountain is called a decorative hydraulic structure, in which water can be supplied under pressure upward and to the sides, as well as simply flow down the walls of the structure. The water in the fountain circulates due to the work of the pump (this principle is also used in artificial and). Depending on the nature of the movement of the water flow, there are cascading, geyser and bell fountains.

• Geyser... The most common type of fountain is when pressurized water is thrown vertically or at an angle. The height to which the liquid is supplied can vary widely. By changing this indicator, you can create both a cozy low fountain and an impressive noisy stream of water reaching a height of several meters.
• Bell... Another easy-to-use solution that fits perfectly into the landscape landscape. Water in such a fountain is supplied to a small height, from where it is evenly distributed around the perimeter by a nozzle, forming a continuous water film in the form of a hemisphere.
• Cascade... The implementation of the cascades is diverse and the most effective: water slowly pours from one container to another, creating the illusion of stepped waterfalls.
• Hybrid solutions... Usually geyser and cascade types of fountains are combined. Water under pressure is supplied to the upper part of the cascade structure, where one or more geysers are formed due to excess pressure. Further, the path of water runs along a cascade.

Construction of a fountain made of stone

We invite you to familiarize yourself with the technology of making the simplest cascade fountain from scrap materials. The techniques underlying its construction will allow you to build any decorative fountain with your own hands.

Before starting work, sketch on a piece of paper a diagram of your future creation. This will allow you to evaluate the pros and cons of the conceived design and already at this stage to choose the best pump option.

Improve your garden in just 10 easy steps:

1. Choose a suitable location... Try to find an area on the leeward side of the house, otherwise the walls may suffer from moisture. Decide on the height of the garden fountain X ( see fig. above). The distance between the house and the fountain should not be less than three times the height to which the water is supplied.
2. Decide on the size... Use a ready-made container (plastic, ceramic, metal, etc.) or dig a small ditch and cover it with waterproofing material or fill the bottom and walls with concrete.
3. Dig a pit and a trench... Make the dimensions of the pit 10-20 cm larger than the dimensions of the container. This is necessary for the construction of a sand cushion. If, after installing the plastic container, voids remain on the sides, fill them with soil and rubble. Dig a trench 30 cm deep from the pit to the house - it is necessary to lay the cable supplying the pump. For protection, place it in a suitable sized plastic pipe or hose. Lead the cable into the house.
4. Install a submersible pump... In order not to have to frequently clean the filter of the pumping equipment, install it on a brick pedestal.
5. Connect the pump to the stainless pipe... The tube will serve as a frame for a structure made of stones, and water will be supplied through it. Determine the size of the tube taking into account the depth of the container and the height of the X fountain.
6. Cover the container with wire racks and sticks... To avoid water contamination with large debris, cover the container with a plastic or stainless mesh with a mesh of no more than 1 × 1 cm. Place several bars across the container that can support the weight of the stone structure.
7. Prepare stones for installation... Choose flat stones of interesting colors and shapes. Wash and dry them thoroughly. Think over their location and drill a hole for the tube (see item 5).
8. Assemble a decorative structure from stones... Place stones carefully on the tube, trying to locate the center of mass at the bottom 1/3 of the height of the structure. This means that larger stones should be at the bottom.
9. Fill the container with water and test the fountain... Water should wash over most of the stones evenly. Adjust the flow and swap stones if necessary.
10. Finishing touch... Cover up the cracks with small stones, and decorate the top of the fountain to your liking.

Not quite sure how to make a fountain? The construction process of such a structure is presented in some detail in the following video.

You can use the most unexpected objects as nozzles. The following video shows a bottle garden fountain - looks unusual.

Selecting a pump for a fountain

The range of pumps is extremely large, so do not rush to buy the first model you see. Your task is to select the device that is optimal in terms of characteristics, suitable for use in specific conditions. And the first thing you need to decide on is to buy a submersible or surface pump?

Features of surface and submersible pumps

For each specific case, select a pump with the appropriate characteristics. First of all, you should be interested in the following indicators:

• maximum head... Usually denoted as H max, measured in meters. Characterizes the maximum height of water rise;
• maximum productivity... It is indicated by Q max, measured in m 3 / h or l / h. Determines the volume of fluid that can be pumped through the pump in an hour.

To make it easier for you to select the equipment, we suggest that you familiarize yourself with the data in the table below. With their help, you can determine the approximate characteristics of the pump.

Guideline data for the selection of a fountain pump

A fountain without a pump - is it real?

There are two approaches to making a fountain without installing a pump:

• head due to the pressure of the liquid column... To build such a structure, you will need a sealed container, pipe or hose installed in the place of the fountain nozzle. Fix the container above the level at which the nozzle is located (the pressure depends on the height), connect it with a hose or pipe to the nozzle. Fill the reservoir with water - get a batch-type design: the fountain will work until the container with water is empty;
• pressure head due to pressure in the water pipe... Take advantage of the head potential generated by your garden community's central plumbing system. Just connect the fountain to a pipe and you can adjust its operation to your liking. Only in this case, do not forget to provide options for using the resulting volume of water!

Regardless of what kind of fountain you decide to build on your garden, be sure to check out the most. Someone else's negative experience is worth a lot! And you can always buy a fountain - a ready-made factory solution that does not require complex work.

An indoor fountain will decorate the house, humidify the air in the room, and give a little coolness on a hot day. It is not at all necessary to buy expensive installations. If you consider yourself a creative person, then please be patient, let your imagination run wild and start creating a fountain with your own hands.

The design of the indoor mini fountain is quite simple. It is based on the principle of a closed cycle: water is poured into a system connected to a power source, while the submersible electric pump lifts the water up, and then, depending on the type of construction, it flows into the storage tank.

An indoor fountain can be of three types, depending on the method of water discharge:

• gushing: the jet beats up and falls into the mini-pool;
• cascading: water falls from a small height, overflowing over decorative ledges;
• closed: water circulates in flasks or flat wall containers in the form of paintings.

Photo source: http://svoimirykami.ucoz.ru

Location of the indoor fountain

Before starting work, decide on the size and location of the future fountain. A bulky, large fountain will look out of place in a small apartment.

An indoor fountain can be floor-standing, wall-mounted or table-top. The choice depends on the size of the room and on the functions assigned to the fountain. For a small room, a small tabletop fountain will be optimal.

Functionally, the fountain serves not only as a decorative item, it humidifies the air well. Therefore, fountains should not be installed near wooden furniture: it can deteriorate from constant moisture. When choosing the location of the fountain, take into account the presence of small children or pets in the house: install the structure where it will not interfere with anyone.

Photo source: http://www.coonplace.ru/

Materials for creating a fountain

Most often, indoor fountains are made of glass and stone. The glass part is a kind of foundation for the fountain, its base. The stones are used for the stability of the structure. For parts of the fountain that do not come into contact with water, you can use wood, ceramics, synthetic materials.

Photo source: http://www.zoloto72.ru

The indoor fountain can be supplemented with lighting. In the dark, such a fountain will serve as a kind of night light. Sound background and additionally built-in clock or barometer will make the fountain functional.

The main element for creating an indoor fountain is a pump (water pump) for circulating water. The indoor fountain is a small setup, so don't overdo it. Choose low-power, quiet pumps for aquariums or especially for small fountains with a capacity of approximately 6 W and 240 liters per hour. The higher the power, the more noisy the pump. You should be hearing the murmur of water, not the electric motor.

Photo source: http://svet-lanka.blogspot.ru

Indoor fountain decor

The beauty of creating a fountain with your own hands lies not only in saving money, but also in the ability to decorate it according to your own taste. If you have difficulties with inspiration, then you can always use advice from people in the know: look through magazines about the interior.

What can be suitable as a decor? Before you run to the store, think about how many pretty things you have around your house and nothing to do. A pots, a ceramic pot or a vase, shells and pebbles brought from the sea - the most popular "filling" for fountains, can be used as a base. Even souvenir figurines can find a second life. Artificial trees and flowers, gravel, natural plants - all this can be a decoration for a fountain.

To create flowing water, you can use different containers: bowls, seashells, lakes, etc.

Photo source: http://domgvozdem.ru/

Indoor fountain step by step

Making a fountain with your own hands is quite simple. The main things you need:

• sealed container for a fountain: flower pots, vase, pot, bucket;
• water pump (pump for distillation of water). The pump can be bought at a hardware store or at a pet store, a low-power water pump for aquariums will do;
• a piece of hose (for example, for cleaning aquariums);
• decor elements.

Photo source: http://www.trozo.ru

We install the pump at the bottom of the selected vessel (there are suction cups on the pump) and attach a hose to it. We put stones around the pump, and the pipe supplying water is brought up between them. We cover the space around the pump with large decorative elements (expanded clay, stone), then with smaller ones (pebbles, shells, glass). We leave only the outlet of the filter - fill the rest with water. The tube, like the pump itself, should be completely disguised so as not to disturb the harmony of the composition. And then the decor and design at your discretion.

Photo source: http://home-sweet.ru

A good solution is to "seat" the figurine (frogs are often used) on a pipe supplying water. To do this, you need to drill a hole in the figurine and pass a tube through it, water will flow from the frog's mouth.

Reliable fixation and sealing of the entire structure is achieved through the use of waterproof adhesives.

The water ejection power is regulated by a wheel located on the pump housing. This power also depends on the diameter of the tube: the smaller it is, the higher the jet, respectively. If you want the water to flow out in several streams, install a divider on the tube.

The operation of a room fountain does not cause much effort and consists only in maintaining the water level in a sufficient volume for circulation. There should be enough water to keep the pump in the water at all times. The water will evaporate, so every week it will have to be added to the fountain.

Photo source: http://tvoidizain.ru/

Funny video

2 year old toddler loves to throw. Look what happened when his parents bought him a basketball hoop!