A do-it-yourself dressing table is a great gift for your sweetheart. Dressing table for the bedroom with your own hands Dressing table for the bedroom with your own hands

If, in practical terms, you are not a deliberately meaningless person, like a people's deputy or the chairman of the fund for the protection of hamsters from gophers, you must certainly imagine the structure of some of the objects around you. And if you also consider yourself a real man, you can make these items or at least fix them. You should not immediately grab the adjustment of the hadron collider - it will not be useful on the farm. But it makes sense to remember that there are much more women's holidays in the year than it seems reasonable. An alternative to buying a gift is to do something yourself, which is not a problem for a person with a full set of working limbs. Let's say you decide to make your own dressing table.

The proposed model of a dressing table with your own hands

Required tool

Here is a list calculated for repeated exploits. So:

Electric drill with a chuck up to at least 10 mm. Ideally, a good screwdriver is more convenient.
Jigsaw with chipboard files. If you are afraid of a jigsaw, prepare money to order curly cuts.
Roulette.
Construction angle (something along which you can draw a perpendicular, with millimeter marks). The length of the ruler is sufficient for 300 mm.
Drills for wood, with a diameter of 8 mm and 5 mm. It's easier to buy a set.
Combination screwdriver with bit set. The kit must include a hexagon bit for confirmations (ask in the building market, they know).
Iron.
Pencil, hammer, knife, dry cloth, fine sandpaper.

Parts order

You will not be able to cut a chipboard sheet at home so as to maintain the desired geometry and cleanliness of the cut. Sawing will have to be ordered. Most building markets selling laminated chipboard have such a service.

Self-made curved saws (radii, etc.) will have to be glued with a soft U-shaped edging in order to close the inevitable chips on the laminate. Kant and other accessories should be bought in specialized furniture accessories stores that are in every city. The sellers will advise you in case of any difficulties.

Note: To communicate with sellers, learn materiel - they do not understand the words "fityulinka", "contraption" and "insert into such a hole."

The choice of color and texture of chipboard is yours, the only technical detail is detailing for a thickness of 16 mm. Also, attention to the edge - melamine, 0.5 mm thick.

We need details of laminated chipboard (all dimensions in millimeters):

1000x450 - table top
630x300 - sidewall
614х350 - 2 pcs., Curbstone sides
350x350 - drawer
600x110 - shelf under the mirror
80x100 - 2 pcs., Shelf side panels
1050x600 - rear panel for the mirror
350х350 - cabinet bottom
318x80 - 2 pcs., Strips in the cabinet
149х343 - 4 pcs., Drawer fronts
100x300 - 8 pcs., Side of boxes
100x259 - 8 pcs., Front and back of boxes

Fiberboard details (3.2 mm thick):

625х345 - the back wall of the curbstone
297х289 - 4 pcs., The bottom of the boxes

Note: Fiberboard parts can be fastened with self-tapping screws (3x16) or nailed down with ordinary nails (1.5x25). The main thing is to check the precise geometry, the right angle in the resulting parallelepiped.

Fittings and fasteners

Confirmations 5x70 (sold in hundreds, useful).
Self-tapping screws 4x16 - "-.
Self-tapping screws 4x25 - "-.
Roller guides for boxes x300, 4 sets.
Drawer handles 4 pcs.
Piping and melamine edging with adhesive backing (with a margin for the first time).
Metal corners, furniture 3 pcs.
Adhesive or mechanical mirror fixture.
Additional screws for handles 4x40, 8 pcs.

Preparing for assembly

Before picking up the parts you need, practice on the scraps. Knowing theoretically how to make a dressing table and putting theory into practice makes a difference.

Countertop shape

Make curly cuts with a jigsaw according to the drawings and snap the “curved” sides of the parts with edging. The end of the part under the edging is first primed with glue (the usual "Moment") until it dries, then another layer of glue is applied and the edging is put on.

Sidewall (right)

It is better to draw the radius of the panel for the mirror by the mirror itself, giving the necessary tolerance. Mirror dimensions 850x500 mm.

Rear panel for mirror

We glue the melamine edge with an ordinary iron. To do this, apply it to the desired end with the glue side down, run it several times from above with a hot (3/4 power) iron and iron it with a dry cloth. We cut off the excess with a blunt (so as not to damage the laminate) with a knife and sandpaper the edges.

The marking of the guides for the boxes on the sidewalls of the curbstone is made from the top of the sidewall according to the following formula: Box number (counting from the top) * facade height (here 149 mm + edge \u003d 151 mm) - 25 mm.

Thus, the center of the fixing holes of the upper rail should be 1 * 151-25 \u003d 126 mm below the top edge of the cabinet, the second 2 * 151-25 \u003d 277 mm, and so on. The lower runners along the same axes are marked at the bottom of the sidewall at a distance of 30 mm.

We fix the guides with 4x16 self-tapping screws with an indent from the front side of the sidewall by 5 mm (for a snug fit of the facades).

We pre-drill the parts fastened with confirmations. The figure shows that in the end face of the part a hole with a diameter of 5 mm and a depth of 60 mm, and in the plane, the diameter of the through hole should be 8 mm.

Holes for confirmations

Assembling the curbstone

The sides of the boxes are drilled flat, the front and back walls are drilled into the end. We collect the "boxes", nail hardboard (fiberboard), fasten the guides with 4x16 screws from below, through the hardboard. It should be remembered that the guides are "left" and "right". The front part of the drawer runner (the one without the roller) is flush with the front edge.

We tighten the sides of the curbstone with confirmations with slats and a bottom. The back wall is fiberboard. Through holes with a diameter of 5 mm on the strips are needed to attach the cabinet to the tabletop from below with 4x25 self-tapping screws.

Assembling the curbstone

The facades are also attached to the front wall of the drawers and are additionally fixed with screws for 4x40 handles after precise alignment.

Final assembly

If you have coped with the curbstone, keeping your fingers and mind intact, smoke and proceed to the remaining elementary stuff. The figures show the order in which the side-table-top-drawer unit should be mounted. Carefully, slowly, with the same confirmations and furniture corners. The corners are needed so that the fasteners do not stick out of the table top, but you can also buy plugs in color for confirmations.

Assembling the sidewall-tabletop-drawer unit

The module "panel with mirror + shelf with supports" is attached from below, through the table top.

Final assembly

Now you know how to make a dressing table with your own hands - all that remains is to clean up the mess in the apartment and get ready to receive grateful kisses from your beloved.

A dressing table is a very useful item that will be the perfect addition to your bedroom. However, if at the moment there is no way to purchase this piece of furniture, then you can try to make it yourself. How to make a dressing table with your own hands? This is a completely feasible task, which is simplified by using the instructions below. If you consider yourself a novice master, choose the simplest possible scheme and get to work. If you have the knowledge and experience, it will be more interesting to find and implement a complex ladies' table with numerous drawers and shelves.

Before you equip your dressing table with your own hands, you should prepare the following materials:

chipboard (a laminated version of the same material will work as well). These options are best suited for self-made furniture, as they are lightweight and quite affordable. In addition, they can be processed without significant effort. Standard - 16 mm thick plates. Alternatively, you can take MDF made in accordance with GOST, which is characterized by a high degree of efficiency and a long service life. If this material suits you more, please note that it has a higher price;
wood. If you have some experience in joinery, then you can choose this material to create a dressing table for a girl. Choose the species that are easiest to process, such as pine, which is relatively inexpensive. Do not forget that to work with wood you will need special equipment, at least a device for milling;
plywood sheet, which will be required for the manufacture of the bottom of the boxes, as well as the back wall of the table.

Don't forget about tools and special tools. Their list includes:

fasteners (confirmations, screws);
roller guides that will be needed to equip boxes. If you do not want to make boxes and plan to do with shelves, then this element is not required at all;
furniture corners made of metal;
furniture fittings;
edge for finishing work;
a screwdriver (a drill with a set of nozzles is also suitable instead);
an electric jigsaw (it is useful for cutting chipboards);
tape measure for making accurate measurements;
building corner;
grainy paper;
screwdriver for work with confirmations.

In addition to the items already listed, additional items may be required, such as a mirror, if you plan on making a stylish dressing table with a mirror to fit into your bedroom. Decorative accessories made of wood will also not be superfluous. They will give the finished product a stylish and modern look, the women's room will be radically transformed if you put a beautiful hand-made table in it. The hope remains that you will be able to pick up the elements you need.

In order to master the making of a dressing table, heed a few valuable tips. First, the key to quality work is the thoroughness of its implementation. Even if you have chosen the most laconic model from the photo, try to grind every detail with special accuracy so that in the future there will be no problems with fitting.

1 2 3 4

Secondly, use the diagrams, observing all the features that the drawing contains.

If you decide to include any additional element in the structure or change the dimensions, then you will have to make additional efforts: buy accessories, replace one material with another, and so on.

This makes the job much more difficult. There is only hope that the novice master will be lucky and he will cope with the task.

How to arrange a dressing table?

1 2 3 4

Assembly instructions for a standard product will help you create a presentable and stylish piece of furniture:

A determinant with the dimensions that the finished product will have (such a parameter as height is especially important), as well as with the place where the furniture will be. The standard is a model with a height of 80 cm. However, the size of the dressing tables may vary depending on the area of \u200b\u200bthe room and other circumstances.
Make a project or pick up a finished one by looking at the photo on our website. Transfer each element to special drawing paper.
Attach the prepared templates to the chipboard, cut out the parts along them using an electric jigsaw for this purpose. If the structure does not include too complex details, then even a novice master who does not have much experience can handle the work.
Sand the ends of the blanks with sandpaper. If chips are formed during this procedure, then it is better to mask them with a special tape. Cover the end pieces with a primer twice to make the edge stronger. For this, it is recommended to use high-quality glue.
Put a piping on the countertops, glue the ends with melamine edging. Fix it well on the edge, and then process it with a heated iron.
Assemble the individual elements that make up the furniture frame. Fasten the countertop, uprights, legs and back wall together. To do this, make holes at the designated points, and then fix the elements using confirmations. Check the corners with the building corner: if everything is done correctly and correctly, tighten the fasteners with a wrench.
Assemble the boxes by drilling the individual elements and securing them with confirmations. Check carefully whether the standard is met and then tighten the fasteners with a screwdriver. Secure the plywood bottom with small studs. Attach the guides and counterparts in the appropriate places, and then insert the box.
On the front, make holes for the handles and fix the fittings.
If the design assumes the presence of a cabinet that closes on the door, you will have to install overhead hinges. To fix them, make holes 12.5 mm deep, attach the hinges using screws. Screw the fittings to the door with self-tapping screws.

If you want to create a do-it-yourself illuminated dressing table that will decorate the interior, purchase LED strips consisting of small lamps. Lighting is a tricky procedure, try to do it with extreme care when creating your own dressing table for the toilet. Alternatively, you can opt for small light bulbs if you have some skills for an electrician and installer. Otherwise, hope remains only for a specialist, whose help is worth using in order to avoid accidents.

Many real owners are wondering if it is possible to design and make home furniture of an average level of complexity by yourself. Of course, it will not be easy for a beginner to make cabinets, tables or bedside tables from a real one. In addition to special skills, special machines and a lot of space in the garage or workshop are needed here, which not everyone can afford in an urban environment. But it is much easier to solve the question of how to make a dressing table with your own hands, if you assemble it not from wood, but from more accessible and easy-to-use chipboard. The fittings are easily bought in a construction supermarket, and even cutting sheets can be ordered from a seller if they are purchased at specialized enterprises. You will only have to design furniture, drilling, cutting small pieces and assembling it.

How to make a dressing table with your own hands?

It is very convenient to model the future product using the 3ds Max program. If you are not very familiar with programming, then you can make simple sketches on paper.

We take chipboard in colors, but if you are not satisfied with dark furniture, buy material for yourself in any other shade. We advise you to immediately stick the PVC edge on the sheets.

We use a pre-prepared template to mark the ends of the parts.

We mark the mating holes.

The template allows you to mark the center of the future hole without a tape measure. Our blanks are 100 mm wide, and 8 mm should be retreated from the edge.

We mark the rest of the details in the same way.

With a hammer and a sharp object, we punch in the center of the hole.

It is most convenient and accurate to drill a sheet on a vertical machine, but in the absence of one, an ordinary drill will do.

The holes are ready, the first part of the do-it-yourself dressing table task is complete.

According to the dimensions, we proceed to the assembly of the boxes. The general view of the drawing shows that we will have 6 small drawers and one large draw-out drawer.

In the second part of the drawing, the racks are not shown in order to make it more convenient to mark the length of all blanks. The dimensions of 6 small boxes are 310x260, but they differ in height. The drawer has dimensions 410x260x60. In accordance with the drawing, we purchase guides.

We collect boxes.

We mark the places where the guides will be attached to the racks. From below, you can immediately drill a hole for the thrust bearings.

We install adjustable legs at the bottom of the cabinet.

The curbstone is ready and you see that in the matter of how to make a dressing table with our own hands, we are already moving towards the final.

We put the boxes in place, check the operation of the mechanism.

The boxes are installed.

The handles can be screwed on or made for the fingers on the facade a curly cut.

We cut out the plate for the mirror, glue the edge and mark the place for its fastening.

Apply a layer of quick-drying silicone or other quality glue.

We install a chic mirror with a facet, carefully seating it on silicone.

We assemble the curbstone, fasten all the structural elements together. At the end, we fix a lamp above the mirror.

The dressing table that we assembled with our own hands is completely ready.

Whatever one may say, it is better to store all the care products, cosmetics and perfume in one place, and not randomly distribute on the shelves in the bathroom, hallway, bedroom and dressing room. A do-it-yourself dressing table is what you need if you want to think over everything to the smallest detail in the design for convenience. It is not so difficult to make it. In fact, in various variations, it is a small one-sided table with drawers and a mirror. The mirror can be stationary or movable, mounted on the hinged tabletop cover from the inside.

Diy photos and drawings of the dressing table

Not so long ago, I went through photos from last year's furniture exhibitions. And in the folder for 2014 I found one very good model.

I liked the console design very much. It's brilliant - to build a console on a similar principle, for example, to a bedside table and get an excellent dressing table with your own hands!

How to make a bedside table with my own hands, I have already painted. Such a console can be attached to any chest of drawers (for example, to) - and a dressing table with a mirror will be quite stylish and interesting to look at.

You can, of course, not try to make the existing furniture in the bedroom multifunctional, but make a dressing table with your own hands as an independent and separate piece of furniture. The drawing and assembly diagram with the dimensions of the do-it-yourself dressing table will look like this.

The dimensions can be changed - make a dressing table with a mirror larger and wider, the way you want. We will describe step by step how to make such a model with your own hands.

How to make a dressing table with your own hands?

Let's not waste time thinking about what the vanity mirror will look like. Since there are really a lot of options:

Attach it to a substrate or insert into a frame.
Make it square, round or fancy shape.
Decorate with sandblasting and bevelling.
Complement with stylish lamps or LED strip.
Buy separately and hang to the wall. In a strict wooden frame or with a frame made of openwork forging.
Design a movable box for it, which will allow you to change the angle of inclination of the mirror.

Which of the options to choose is up to you.

Let's focus on the basic design of the dressing table for now. In fact, it will be necessary to assemble the frame of the curbstone, the boxes for it and the console superstructure.

There is not much to drill for the assembly for confirmations. If the parts are cut to size and rolled on the visible sides, the whole process will take no more than a day.

DIY dressing table, calculation of details according to drawings

You can make a dressing table for a girl or quite an adult lady from any material - wood, plywood, laminated chipboard. The main thing is to decide on the model from the photo. Then draw everything to scale in order to determine the size and not "lose" sight of the details. And then, taking into account the thickness of the material, calculate the dimensions of all the blanks.

The most convenient way to do this is in Excel, entering data into a tabular form. For our model of the dressing table, the calculations of the parts, taking into account the chipboard thickness of 16 mm and indicating the sides for edgebanding, will be as follows.

Chipboard consumption relative to the whole sheet is small, it can be completely combined with the manufacture of other pieces of furniture for the bedroom. Or lay, for example, a few simple shelves in the cut to attach to the wall on beautiful holders - they will never be superfluous in the house.

You can also drive a base under a mirror of the desired size into the flow - if you decide to choose the option when it is simply attached to the chipboard, as in the photo.

Drilling of dressing table parts and assembly according to drawings

First, all the details of the future table must be drilled. Before that, it is better to lay out the paired parts so as not to confuse the sides from which they will be drilled relative to the leading edge. And also do not forget that the front, sidewalls of the boxes are drilled mirror-like relative to each other.

If all the holes have been drilled correctly, the furniture will be assembled as a constructor. How to install drawers in a cabinet, with which guides, you can see here, in the assembly of a high chest of drawers. All actions will be similar.

To facilitate the assembly of the dressing table with my own hands, I will give an assembly drawing.

What you need to make a do-it-yourself dressing table

From the tool, if you order sawing parts and edging on the side, you only need the usual master's tool - a drill for drilling, a screwdriver and a screwdriver for assembly, an awl, tape measure, square and other small improvised material that is in any home.

You will also need to purchase accessories and consumables. I indicated everything you need in the estimate table.

Additional costs include purchasing a mirror of the desired size and design.

It doesn't take too much money if you decide to make your own dressing table. Much less than picking up something from ready-made furniture.

How to make a dressing table with your own hands as the desired piece of furniture and decoration, it is suggested to familiarize yourself with this article.

While the dressing table seems like an optional item, in practice it is necessary. Some models turn into a shelf and are placed under the mirror not only in the bedroom, but also in the hallway or bathroom.

If desired and possible, a dressing table is easy enough to make with your own hands.

Many girls set a dressing table in their bedroom. Here you can not only store everything you need, but also use it as a wonderful decorative element. Such models are executed in a variety of styles so that the owner can choose or make a product that best suits the general.

The most popular dressing tables are those with a mirror. In the interior of the bedroom, the most common models are made in vintage, modern or classic style, which look very elegant.

For those who pay more attention to visual design, classic and vintage are suitable. These models have expressive, rather bright decorative features that can be seen in the photo.

A simpler and more practical style is modern (see). Contrasting elements, even corners and small details are attractive.

They can look like modern dressing table options. For manufacturing, chipboard is used, into which plastic parts are inserted.

The criteria for choosing dressing tables are:

Each model has its own characteristics, detail and practicality, so it's worth paying attention to. But the price of a ready-made comfortable table can be much higher than it was planned to spend on it, so many are interested in how to make a dressing table with their own hands.

Tip: Before you start creating an author's model, you should familiarize yourself with the nuances of how factory products are selected.

The design should be quite comfortable to use, but not take up a lot of space. The product is made compact and as spacious as possible. This can be solved by arranging additional sectors placed on both sides, in front of the mirror and under the tabletop.
With a large room, you can install a volumetric structure with a sufficiently large mirror, which will be convenient and at the same time beautiful.
There is an option for mounting the product with a suspended table structure. This model takes up less space and is a cheaper option.
After choosing a model, you can start making a dressing table.

Preparatory work

Before starting the assembly of the structure, it is necessary to develop its drawing, which will indicate all the dimensions necessary for manufacturing. When making a do-it-yourself dressing table, drawings and diagrams help in the work, which will avoid unforeseen mistakes and miscalculations.

Such documentation is developed independently. In this case, an individual model of furniture is invented or a ready-made analogue is taken as a basis.

You can use your own dimensions and change the entire structure to suit your requirements. The dressing table is equipped with one or two bedside tables (see).

The necessary small items are removed into the drawers, and cosmetic accessories, a home first-aid kit, books are placed on the shelves. But you can redistribute the storage space to your liking.

To carry out the work, you will need tools:

Electric drill with a set of drills that are designed for woodworking operations.
Screwdriver with a set of necessary bits.
An electric jigsaw or a hacksaw that has small teeth.
A set with various blades of screwdrivers.
Hex keys.

It is necessary to prepare measuring instruments:

Measuring tape centimeter.
Measuring ruler.
A metal or wooden square.
Building level.

Advice: The control of the installation of fasteners must not be neglected, otherwise the furniture may be deformed.

You will need a regular pencil for marking.

What materials are needed to make a table

During the preparatory work, you should decide on the location of the mirror. It can be part of the table or separately mounted on the wall. The easiest way is to use a ready-made mirror, which will avoid time-consuming and rather complicated work during its installation.

It is necessary to make a decision on how the tabletop cuts will be decorated. Amateur craftsmen simply grind them or putty and then paint them. But such methods are not reliable enough.

Tip: For decoration, you should use a special furniture edging or end tape. To install it, you will need an iron or a small power hair dryer.

For the manufacture of countertops of an unusual shape, it is easier to contact a specialized carpentry workshop.

When making a model, you must:

Make a life-size piece from paper or cardboard.
Select fittings:

pens;
furniture hinges;
all kinds of awnings;
guides for pulling out drawers. They can be roller or ball designs. The former are of low cost. Ball guides are more reliable and convenient to use.

Self-tapping screws, confirms or Euro bolts are used to fix the elements.

Method: For the reliability and durability of the nodes, all connections should be additionally glued with ordinary PVA glue.

For this method of fixing, you will need to use clamps to tighten the parts until they are completely dry.
Special plastic plugs that cover the bolt heads enhance the product's appearance.
The table can be made from:

Chipboard;
sufficiently thick plywood, at least 16 millimeters thick;
solid wood panel, but in this case the furniture will have a more massive look.

How to assemble a dressing table

The dressing table is made in the following sequence:

The table top is being formed. Previously, you should glue the surface of the sheet according to the applied markings with paper construction tape.
A cut is formed on top of it. This will prevent the formation of chips, chips and excess chips.
The front edge of the cover is processed. It should be roughly sanded with coarse sanding paper and then overcoated with glue. In this case, you can use glue "Moment".
The primer must be completely dry.
The surface is greased with glue again.
The end edge is installed.
The tape is glued with an iron. In this case, the temperature of the iron should be set to "cotton".

The excess edge is cut off with a clerical knife.
The slices are cleaned.
The mirror rack is designed in the same way.
The curbstones sawn in advance according to the dimensions of the sidewalls are marked out for installing guides under the boxes.

The location of the boxes is marked as follows:

the serial number of the box is taken, starting from the top;
multiplied by the wall height in centimeters;
the height of the edge for finishing is added, which is equal to 25 millimeters.

With a box height of about 140 centimeters, with an edge height of four millimeters, the calculation will look like this:

first box: 1 x 140 + 4 - 25 \u003d 119 millimeters;
second drawer: 2 x 140 + 4 - 25 \u003d 259 millimeters.

In this case, the guide or its center for the first box is fixed at a distance from the upper edge of the sidewall by 119 millimeters, and the second at 259 millimeters.

Dressing table drawers are assembled.
In the side blanks for the walls, holes are drilled in the plane; in the front and rear elements, the same sockets are formed at the ends.
For fixation, a wooden dowel or Euro bolts are used.
Collect around the perimeter of the wall.
The bottom is attached to them, which can be made from a small thickness of plywood or hardboard.
From the outside, guides are attached with self-tapping screws. When using roller designs, each side requires the installation of its own guides.

The dressing table is being finalized.

For this:

Pedestals are mounted.
Transverse top braces or strips are connected to the side elements.
The bottom is fixed.
Before installing the screed, holes are formed in them to fix the tabletop.
The last ones to be installed are:

table cover;
on boxes, facades;
fittings;
doors to compartments for storing small items.

For laminate vanity tables, you can finish the job here.

When using chipboard or plywood, the product needs a final finish.

For this:

All cuts and cuts are carefully sanded and sanded.
The surfaces are covered with paint or stain.

Tip: When using paint, the table will look like it is assembled from precious woods, and the stain can make the structure of the wood more pronounced.

The purchase of furniture with a glossy shine helps the surface treatment with varnish. Otherwise, the table will be dull.

How to make a dressing table with your own hands with drawings developed independently or by third-party organizations, the video in this article will tell you.