Organizer for storing plywood tools. How to make a quality DIY toolbox

The visiting card of a true master is the box in which he stores the instrument.

It is impossible to do without this accessory if you need to do the job quickly and efficiently, without wasting time looking for drills and self-tapping screws, taps, screwdrivers and dozens of other necessary little things.

A plank box with a handle, which for centuries served as a repository for hand tools, today can only be found in the museum of wooden architecture.

She was replaced by light and durable cases, suitcases and organizers that amaze the imagination with a variety of shapes, volumes and sizes.

How not to drown in the sea of \u200b\u200bproposals and choose a convenient, fairly compact and reliable tool box, we will consider in our article.

What is a toolbox for?

It has three main functions:

• Optimizes storage space by keeping the maximum number of needed fixtures in the minimum space.
• Facilitates and speeds up the work, since all the accessories in it are laid out in a certain order, well visible and easily accessible for use.
• Simplifies tool transport with handles, shoulder straps or wheels.

It should be noted that tool storage is not the only function of such boxes. Since small fasteners are often required during work, the most "honorable" place at the upper level is assigned for it.

Types of tool storage boxes

Depending on the method of accessing the content, there are open and closed boxes.

The first ones resemble an ordinary travel bag. Their main advantage is quick access to stored items, and their disadvantages are inconvenience during carrying (the contents spill out when tipping over) and a low level of safety.

The most popular are boxes - strong boxes with a tightly closing lid, equipped with latches and a lock.

Depending on the type of material used for the manufacture, tool boxes are divided into metal, plastic and metal-plastic.

The steel box is durable and reliable. However, it cannot be called easy. Therefore, aluminum is often used in production - a light, durable and corrosion-resistant metal. If you need a large portable box for storing tools, opening its contents in several levels, then it is better to give preference to this particular material.

Plastic is another material widely used in the manufacture of tool boxes. It is distinguished by an affordable price, sufficiently high strength and durability.

Two main drawbacks of this material should be mentioned - low strength of the "body-lock" connection and fragility in the cold. Therefore, in the cold season, you should protect such a suitcase for tools from strong blows.

The search for a material that combines the lightness of plastic with the strength of metal led to the creation of galvanized metal-plastic. Boxes from it are spacious, light enough and can withstand very heavy loads.

Another distinguishing feature of tool boxes relates to the way of use: professional and household. The former are distinguished by their large capacity, maximum reliability and high price. Household models are small in size, and inexpensive materials and accessories are used for their manufacture.

The "specialization" of tool boxes also varies, which must be taken into account when purchasing. The box can be designed to store only carpentry tools or locksmith accessories. The universal version combines in its design compartments designed for different types of mounting equipment (screwdriver, drills, grinders, clamps, drills, ties, screws).

Often all the free space is allocated for a convenient layout of hardware. Such a box is called an organizer.

You can't put a lot of tools in it, but all the small things necessary for work will fit completely.

How to choose the right option?

First you need to answer the following questions:

1. How many and what tools do you most often need for work.
2. Is there enough for your needs a standard compartment for hardware (screws, screws, screws and nuts) or is it better to buy a separate organizer box for them?
3. Do you often move the tool over long distances (option with wheels, shoulder strap or regular handle).

Having dealt with your needs, you can start choosing a suitable model, focusing on the products of well-known companies. There are not very many of them on the "box" market.

The most popular are foreign brands Stanley, Kroft, Keter, Fit, Blocker. Choosing a toolbox of domestic production, you should pay attention to the products of the Zubr company.

The American firm Stanley (Stanley) produces professional and household tool cases. Its products are of traditionally high quality, for which you will have to pay decent money. So for a standard 19-inch plastic box from this manufacturer (49x25x24cm), sellers ask from 2,000 rubles.

The average cost of a box made of metal-plastic (20-inch size) is 2,900 rubles. Large boxes of this company, equipped with transport wheels, can be bought for no less than 8,000 rubles.

For domestic use, inexpensive tool boxes made by the already mentioned firms Fit, Keter, Kroft, Blocker are well suited. Depending on the size and quality of the material, the price tags for these products range from 400 to 3,500 rubles. Models with wheels are generally slightly more expensive.

The Zubr company produces suitcases for tools in different cost categories (from 500 to 4,500 rubles) and practically competes on equal terms with products of foreign brands. Therefore, among her products, both an experienced craftsman and a simple lover of home crafts will find a suitable option for themselves.

When choosing a tool case, pay attention to the quality of the plastic soldering, its thickness and the reliability of fastening the latches. The last point is especially important, since the tool case with spontaneously opening or broken locks is extremely inconvenient to carry.

Those who use not only small hand tools but also larger electrified tools will surely like the model with removable partitions. By removing them, you can significantly increase the internal volume of the box.

How to make a DIY toolbox?

Such a design does not have especially complex elements, so it can be done on your own. The simplest homemade toolbox is an open box with a handle.

For its manufacture, you can use a thin board, plywood or OSB board. Having cut out two ends with holes for the handle according to the template, the side walls and the bottom are screwed to them with self-tapping screws. After that, one or two partitions are placed inside. Their height must be chosen such that there is room on top for installing a shallow wooden or metal box in which small fasteners will be stored.

Putting a cover made of durable artificial leather on such a box with compartments-pockets sewn to it, you can significantly increase the amount of stored tools.

The wooden handle can be replaced with a strap handle, more convenient to carry.

A more difficult task is to make a folding tool box with your own hands. It is very roomy and easy to use.

The most interesting feature of this design is the system of levers (metal or wood), with which it opens its compartments on several levels.

After assembling the large lower and four upper compartments, place them one on top of the other, as shown in the figure, and then mark the places for attaching the swing arms.

Before fixing them completely, check the ease of movement and the accuracy of the opening of the entire structure. On the side walls of the upper compartments, you need to attach two metal carrying handles.

All the necessary accessories (locks, locks and hinges) for a homemade box can be purchased in specialized stores.

As soon as the owner of the house decides that it is time to hang up the shelf for flowers, which his wife is so persistently reminded of for the second month, it turns out that the necessary tools have disappeared somewhere. The situation is familiar, because usually hand tools, all these keys, hammers, screwdrivers, are kept out of sight. We use tools, of course, not every day, but the storage system must be organized correctly so that later in a hurry we do not need to look for, for example, a key for 12.

Storage options

Let's immediately decide what we're going to talk about a workshop that can be set up in a garage, a free-standing barn, a summer kitchen, on a fairly spacious loggia or balcony. There are usually not many tools in the apartment, and the existing screwdrivers, hammer and pliers can be folded into a specially designated box or bag, which can take place on the mezzanine or in the hallway.

If there are noticeably more hand tools, they need their own separate corner, in which you have to put things in order. The main condition is that the storage place for tools must be dry, because metal parts do not like moisture.

A well thought out storage system has many advantages. You will always know exactly what and where lies, you will not have to look for anything. If the tools are always in their place, you will remember in time that a month ago you gave your neighbor a nail puller, which he needed literally for an hour. Plus, correctly positioned tools take up less workshop space, freeing up space for work.

First of all, you should decide whether you will buy ready-made shelves for tools, a metal mobile cabinet with drawers, or equip a workshop with your own hands "from scratch". Immediately, we note that ready-made storage systems for hand tools are not always 100% suitable, often they have to be altered for themselves.

Consider a few ideas for self-organizing the storage of hand tools in the workshop.

1. First of all, it is worth taking care of the little things: nails, screws, bolts, which tend to get lost and crumble throughout the room. For their storage, you can adapt ordinary plastic bottles with cut necks - you will immediately see what is where. Small plastic boxes are also suitable, which are better to sign, noting that, for example, there are nails of this size. It is convenient to place such containers for storing small items on a shelf above the work table so as not to clutter it up. But glass jars should not be used in the workshop. There are too many heavy metal objects that can accidentally touch such a fragile container.

2. Magnet. Real craftsmen usually have a large magnet on their desktop, to which small metal tools successfully cling. Now there are special magnetic surfaces, holders, on which you can conveniently and simply store many tools and parts.

3. Plywood board - the choice of old school craftsmen. From pieces of bars on such a shield, you can create a whole storage system that will not take up much space and will allow you to place almost all hand tools. The costs for such storage places are minimal, and everything will be done according to the needs of the master.

4. You can also buy ready-made sheet metal with holes for tool holders. However, you can do this yourself. Saws, keys, and other tools with special holes in the handles are hung on ordinary nails or self-tapping screws in the right order.

5. It is convenient to provide a separate storage for screwdrivers, for example, a regular school holder for pencils and pens.

6. Plastic boxes with compartments, which are usually used for forks and spoons in the kitchen, can also be adapted for small hand tools.

7. If you don't really want to build panels and make shelves, you can transfer an old sideboard or sideboard to the garage workshop. It has tons of shelves and drawers that can hold a lot of tools. The main thing is to arrange everything yourself, in order to know exactly where the gardening tools are stored, and where the carpentry tools are.

8. For drills and bits of a certain size, it is better to buy a ready-made lodgment - an insert with tools. Or drill holes in a wooden beam where the drills will fit. And sign - 3, 4.5, 9 and so on, so that you immediately know the required size of the cutting tool.

9. When arranging storage areas in the workshop, care should be taken to ensure safety, especially if small children can enter the room. In this case, it is better to hang piercing and cutting tools on the wall higher, and chemical liquids are securely closed in a cabinet with lockable doors.

10. For garden hand tools, a free-standing rack with holders for long handles of shovels and hoes is perfect. Of course, you can just lean them against the wall, but remember the proverb about the same rake?

Let us state that it is not so difficult to organize a workshop, there are many simple ideas. Just tune in to the fact that once you have to tinker in the garage a little longer, make an effort, but then there will always be a strict order in your workshop and there will definitely not be any problems with finding a screwdriver with a “cross”.

The house constantly has to fix something. It could be a leaking tap, a shelf that has come loose, or a broken chair. Of course, a man needs a special tool for each of these actions. As a result, this leads to the accumulation of a large number of self-tapping screws, hammers, wrenches, etc.

Where to put all the tools so that they are in one place and at the same time do not attract attention? Of course, the best option would be to have a box for tools, which can be purchased at the store or made with your own hands.

What are the boxes?

Hardware stores offer not only materials for repairs, but also special boxes in which it is convenient to store tools in a compact form. If there is no time and desire to make such a box with your own hands, then you can easily purchase it ready-made. However, it would be much better to do it yourself.

A homemade box will be direct proof that a man is a jack of all trades and can easily cope with any task.

Before buying or making at home, you should clearly determine the type of box that will be most useful. For this, its purpose is determined.

Irregular use does not imply a fancy design. Much better in this case is a simple box-box with one section. There is also another type - an organizer box. It is more suitable for men who are constantly involved in renovation work, whether at home or in the workplace.

Making the right choice is based on personal preference. The choice of a box depends on the man himself and his skill and desire to make something.

How to make a box with your own hands in stages?

If it was decided to make the box yourself, then you need to have step-by-step instructions, including a sequence of actions. It will allow you to accurately understand how to make a tool box without much financial and labor costs. Let's define the main stages of work:

Defining a plan

This stage is very important, since the calculations obtained and the schemes made will make it possible to draw up a prototype of the structure. If somewhere there is a mistake or error, then the final product may be very different from what was intended.

To represent the box in the form of a drawing, use paper and a pencil or a special program on a computer.

Materials for work

It should be clearly understood what materials will be used to create the future toolbox. They are categorized as required and optional.

The latter depend on the specific case, and the mandatory group includes measuring devices, fasteners, a hammer, a hacksaw, etc.

Manufacturing process

The main work that will determine the outcome takes place at this stage.

Manufacturing work

To understand the specifics of how to make a structure yourself, we will give a simple example, which is shown in the photo of a toolbox. The design is a box-box with a special handle for moving.

What is such a box made of? Plywood, plastic or metal materials work best. Their choice again depends on the personal preferences of the master. As a rule, most use conifers for manufacturing. It's all about their availability, high quality and ease of processing.

Let's look at the process of making a box-box step by step:

• After a drawing is made on paper or a computer, it is transferred to the material that will serve as the basis for the design. That is, details are drawn on wood, plastic or metal with a pencil, and then cut out with a hacksaw.
• The main elements of the box: walls (4 pcs.), Bottom. The simplest toolbox may not contain a lid.
• Once all the parts are cut, they are connected with glue and wait to dry.
• A few hours later, when the glue is completely dry, the joints are additionally fastened with nails or self-tapping screws.
• Installing the handle. A wooden rail is suitable as it.

By following these simple steps, you can get a great DIY toolbox.

The finished structure is additionally coated with a varnish layer to give shine, a beautiful appearance and protect the material from liquid ingress.

The presented box-box is considered the simplest, but at the same time it is very convenient. Following step by step instructions, even a beginner can make such a box with his own hands.

Of course, later you can make a more advanced and complex model, but for the first experience, a simple box-box cannot be better suited.

DIY toolbox photo

A large and convenient box for tools is the dream of any craftsman. This is understandable, because in such a repository you can compactly pack all your tools. They are not so expensive today, so one of the options is to buy in a store or create a similar masterpiece yourself. Which option would be acceptable for you? Of course, the purchased one has a certain size, but there may be much more tools than can fit into it. But one way or another, you have to put up with it or again run to the store and buy a new one. It is quite another matter to do it yourself: I selected the necessary material and calculated it for all available tools and even with a perspective. Conveniently? You will most likely agree with this argument. Therefore, in this article, let's talk about how to make such a box yourself at home.

What should HE be?

If this is a home box, then it can be a regular box with a handle. Well, if you are, for example, a plumber, then it is clear that you need a box that is more functional, spacious and durable. This role will be successfully performed by the organizer. However, in this article, as an example, consider a simple home option - a box with a handle. So, we will assume that we have decided on the type of box where we will keep all the tools we need, or almost everything.

Where do we start? First, let's select the material. It can be plywood, wood or even metal, then we will make calculations. Only then can you start drawing up a detailed drawing. This can be done in the classical way, that is, on a Whatman paper using a well-sharpened pencil, ruler, compasses, square, etc.

The non-classical method is using a special computer program. "AutoCAD" and "Compass" are just "sharpened" to make a professional accurate drawing. The advantage of such programs is that they will help to avoid errors in the calculation and, moreover, it is possible to see in advance what you will get out of all this.

These programs will only serve well if you have the specific skills to use them.

The material was selected, and now for the manufacture it remains to assemble all the tools that we will need. Of course, the types of tools are individual. It all depends on what kind of box you want. They are also different. But, one way or another, there are universal tools. They are always needed. This is a measuring tool:

• fasteners;
• a hammer;
• screwdriver.

We start manufacturing

We take a traditional material - a coniferous edged board. As for processing, it is the simplest and most affordable material, which also has good strength properties.

As planned, it will be a wooden box, and our task now is to materialize the drawing itself into a material. For this business we need a ruler and a pencil. After that, we carry out the markings on the material and cut out the component parts of the product with a hacksaw or jigsaw. If we have planned a conventional non-closing option, then we need to make five planes: four walls and a bottom.

When assembling, it is generally best to use wood glue. The joints must be cleaned, and only then apply glue, after which we firmly squeeze the parts together. Be sure to let the glue dry completely.

After this operation, we can additionally strengthen the box with fasteners - self-tapping screws. They fixed it. Now you need to make a handle. This can be a regular wooden strip that we need to nail or screw to the top edges of the side elements.

Organizer

Following the principle "from simple to complex", now let's talk about the organizer. It is clear that in the open-top box, which was described above, you can put a large tool: a hand saw, a hammer, a mallet and much, much more.

And what to do with small things? All sorts of screws, bolts, nuts, etc. This small fastener tends to get lost or not be at the very moment when it is especially needed. This is where we need an organizer.

As already noted, this type of boxes by their design is the most functional in operation. What is he like? It's kind of like a box on a box, or rather, many drawers in one section for storing not only medium-sized tools, but also all kinds of small things. Of course, at first glance, it may seem that it will not be easy to manufacture such a structure. But it only seems to be. Basically, difficulties arise in the manufacture of a sliding mechanism. Everything else is much easier to do. Now in more detail about the manufacturing technology.

1. We start by making the main body. It must be open and deep so that we can fit various medium-sized tools (hammers, wrenches, etc.) into it. We can say that the design of this main body is quite simple, but in essence it is an ordinary box, which can be divided into several sections using vertical planes.
2. The next stage is the production of 4 smaller boxes. You have probably noticed that the number of these sections is even, and we mentally divide them into pairs, trying to adhere to the size of their lower big brother when manufacturing. They will be stacked on top of each other. One pair of boxes (top) will have lids. They will be either folding on the piano hinges, or retractable like a Soviet school pencil case.
3. Now it remains to connect these boxes to each other. We will do this using metal connecting strips. We need 6 pieces. On the one hand, as well as on the other, we hook on one plate (short) to connect the two lower boxes - small and large. Two more plates (long) will connect all the boxes. And finally, the longest plank will act as a handle, and at the same time connect the two upper floors of the organizer. As you can see, there is nothing complicated here, and the sliding mechanism is extremely simplified, as shown by the example of a metal organizer - the principle is the same.

Making a metal case for tools

Now let's talk about a homemade metal case. Don't immediately conclude that this is impossible. Of course, only an experienced locksmith can make an organizer out of metal on his own and with the presence of special tools and appropriate material. Factory-made metal boxes are usually made from light metals such as aluminum so that the box itself is not heavy. It is difficult to work with aluminum at home.

In principle, a metal box for - it says loudly. Rather, an ordinary box will be made of metal. The material that will be needed for the manufacture of such a box is the usual soft zinc plating (about 0.3 mm thick). From the tools we need:

• square;
• caliper (marking);
• sharpened small core or marker;
• ruler;
• a hammer;
• anvil (wide metal bar);
• file;
• pliers.

Then everything follows the same scenario: drawing, marking. The most interesting thing is that all this can be done directly on the galvanized sheet using a sharply sharpened core (or marker), whatever you like. We then mark with a marker on the metal those places that we will have to delete.

After that, we start cutting using metal scissors.

After trimming all the excess, we get such a complex geometric shape ("winged rectangle").

Now let's do some blacksmithing. For this case, we have an anvil, and, tapping with a hammer, we will gently bend the edges of our workpiece. It is better to do this not chaotically, but in a certain order.

First, bend one side, and then bend the other.

Now the sides are in turn.

After that, let's bend the protruding petals. They will make the structure itself more rigid, and it will not "play".

Pliers can be used to wrap protruding parts on top of the box.

After such manipulations, you should thoroughly walk around the entire product with a hammer, aligning it.

In this case, it turned out to be a small box. But after all, according to this principle, you can make a similar one - more, and in the end you will get such a metal tool box.

So, if you wish, anything is possible.

We hope that this article will be useful to you, dear readers. If your tools are in order, then supplement it with the manufacture of a regular tool box. If your tools do not have a permanent "place of residence", then think about building a two- or even three-story "transforming house" for it. Try this, and your tool will always be in place, and you yourself will be pleased to use a product made by yourself in your household.

Video

This video shows how you can make a toolbox from scrap materials:

See how you can make organizer cases for the tool yourself:

Every man will agree that a high-quality and multifunctional tool box is an almost irreplaceable thing in the household. Many craftsmen prefer to buy a ready-made box in the nearest store, where a wide range is presented. But such an adaptation can be made independently, in accordance with personal wishes. Moreover, the manufacturing process itself is not considered difficult, thanks to which even a beginner can cope with this task.

Classification of tool boxes

There are several main criteria due to which multifunctional products can be divided into several main groups.

According to the material from which the body is made:

By type of stored instruments:

Construction of modern boxes

Speaking about the design of such boxes, we do not mean their shape, but the way of opening and the presence of auxiliary sections. The following designs are considered standard today:

Making a box from plywood

To make a do-it-yourself toolbox from plywood, you will need the following tools and materials:

Before you start manufacturing, you need to carefully work out the project of the future product (the drawing can be done on a computer or on plain paper). The necessary calculations are made, the main dimensions are fixed. Thereafter all marks must be transferred to a plywood sheet... This can be done using a regular ruler, tape measure, marker or even a pencil. All blanks for the future box are cut along the outlined lines. And also it is necessary to mark all the grooves and cut them out on the blanks. Irregularities formed in the process of work can be processed with a chisel. It is thanks to the grooves that the final design of the box will turn out to be stronger and more durable.

The next stage is the assembly of the entire structure. Use high quality wood glue to glue small parts together. The main sides of the box are also glued together. To improve the result, they need to be pressed tightly against each other. It is best to use a special rubber strip for this. You cannot remove it until the glue is completely dry. On the doors, you need to round off the corners.

Convenient handle for boxing with tools can be made of MDF. Initially, the layout is drawn directly on the wood and only then is it cut out. When the handle is ready, the surface must be finished. It is fastened with wood glue and screws.... If you do not want to make a handle yourself, then you can purchase it at a hardware store. The main criterion for making the right choice is high strength and reliability. Now you need to attach the outer drawer cover and doors. All parts are applied in place, and then the areas for attaching the loops are marked with a pencil.

To organize the order in the box, you can make small compartments. All components are cut according to the same principle as the box. Grooves are made and glued. On one side of the box, you can make a special compartment for storing screwdrivers. The most convenient option is considered to be where this function is performed by special plywood inserts with slots. Velcro is attached to the other side of the drawer to store cables and extension cords.

Wooden box manufacturing technology

It is this option that is considered a classic in joinery. Drawings of this portable vault were printed in magazines 50 years ago. For the manufacture of you will need a high-quality board with a thickness of 10 to 20 mmand also a hacksaw for wood. Due to the simple manufacturing technology, many craftsmen still choose this option.

In the classic design, there are no separate compartments or special multifunctional devices. The final product will look like a neat deep box with a comfortable handle along its entire length. This shape of the handle has a practical purpose. After all, if the weight of the tools used is unevenly distributed, then you can always find the center of gravity point.

A practical addition is the insert section with its own handle, the height of which takes up 50% of the entire drawer. This box can be used for small tools (awl, screwdrivers, small keys), as well as consumables (bits for screwdrivers, electrical tape, drills). Any type of wood can be used for its manufacture.

Universal case made of plastic canister

If you want to make a toolbox with your own hands, but there is no plywood sheet, then you can use a regular plastic canister. For work you will need:

• Hacksaw.
• Plastic containers.
• Fasteners.

The used canister must be rectangular with a comfortable handle, which must be centered. In addition, it must be equipped with a screw cap to be used as a lock.

The process of making the box itself is quite simple. Using a hacksaw, you need to make cuts in the canister. The first cut must fall on the center of the neck and the container handle, it is best to remove the plug, and cut through the top wall. The second cut is made exclusively in the horizontal direction. It is best if it is located at the top of the canister, on the end sides. The plastic container itself must be sawn from the top wall at a distance of 4 cm, and on the sides by 3 cm.

When all the cuts have been made, the canister can be opened. To do this, bend all the side parts of the top cover with the halves of the handle. In such a box, you can store various materials for fasteners: nails, bolts, screws, nuts. The top must be closed by folding the handles together. Such a device is fixed with a screw cap.

To make the box as strong as possible, additional gaps must be made on the end walls... Small holes are drilled in the lid itself or in the walls, into which hooks are inserted, as well as bolts and nuts.

Metal box for instruments

This option is most suitable for experienced locksmiths who have the necessary equipment and material. Factory-made metal tool boxes are made from lightweight metals such as aluminum. As a result, the product is as light and durable as possible. But at home, working with aluminum is much more difficult.

Even a beginner can make this version of a metal box. After all, the most ordinary box and special partitions will be made of metal. Initially, you need to prepare the main material - galvanized steel (0.4 mm thick). From the tools you need to prepare:

• Marking vernier caliper.
• Metal square.
• Ruler.
• A hammer.
• Pliers.
• File.
• Sharpened core or marker.
• Anvil.

Next, a drawing and markup are made. You need to mark only those places that will need to be deleted later. Now you can start trimming with metal scissors. After trimming everything that is superfluous, you should get a kind of geometric figure (winged rectangle).

Next, you need to use an anvil. By tapping with a hammer, gradually bend the edges of the workpiece. It is better not to work in a chaotic manner, all actions should be consistent. First, one sidewall is folded, and then another. To wrap protruding parts, pliers are used.

After these manipulations, you need to walk with a hammer over the entire structure to align it. This will create a small metal box for storing tools. In the future, you can experiment not only with the size, but also with the shapes of such boxes.

Almost every home has some kind of tools. When there are too many of them, you can make your own multifunctional storage box. Experienced craftsmen believe that such a box is considered an integral attribute for storing various devices. Such boxes can be stored in the workshop and even taken with you on a long journey.