Do-it-yourself lamps and lamps from pipes: four simple instructions. Do-it-yourself lamp made of pvc pipes DIY lamp made of pipes and fittings

We often come across articles that describe how you can create unusual, but at the same time useful things for your house or apartment from unnecessary materials, which, for example, were left after repairs. Also, crafts can be made from plastic bottles, disposable tableware, corks and the like. But in this article we will talk about material such as PVC pipes, which, according to the rules, are needed and used in the sewer system, but now we will describe how to make a useful thing out of this material, such as a PVC pipe lamp.

From a completely simple and inexpensive material, you can create something fabulous and fantastic, the most important thing here is to have skillful hands and a rich imagination, the rest is up to the small. Thanks to these good qualities, you can create beautiful and beautiful night lights in the form of lamps.

In fact, we don’t know who first thought of this idea and created such beauty as a lamp made of PVC pipes, but nowadays people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such needlework, but ours is no exception. country Russia.

To carry out a beautiful craft, we will list the materials and tools that we will need during the work:

1. A drill with a sufficient and diverse set of nozzles that have different thicknesses and can still be distinguished by the types of grinding, we need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide for a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

PVC pipe wireless lamp

If you do not want to spend a lot of time and effort on making a pipe lamp, then the work can be done with just one drill. But if you want to perform a drawing that is voluminous and complex in its composition, then for this you need to include in the work the execution of small to large holes, complex rhinestones, work with the thickness of the pipe walls, removing the outer layers to add volume and aesthetics and, of course, giving the effect 3D to some details.

Before we start making patterns and rhinestones on a lighting device, let's decide what size we need a lamp. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let's move on to choosing templates and stencils for the desired picture that you want to depict on your device. As patterns, a floral look of a picture, a landscape or a banal ornament, and the like, the choice of your taste can serve.

The silhouette of the selected pattern is transferred to the pipe in a very simple, but at the same time convenient method, at the same time, attention is paid to the edges at the top and bottom. Before you begin, consider the desired size of the holes in the pipe in diameter so that the drills fit your ideas. A very simple option can serve as a good idea, for example, you don’t need to draw and cut out various patterns, you can simply cut out a beautiful decorative lamp using the drawn holes of various diameters.

A very elegant drawing is obtained when light halftones are used in the work. Such an effect and quality can be obtained when the outer layer of the pipe, that is, PVC, is removed with the help of abrasive tips. The more layers you remove, the greater the transparent effect will be and the light will be much brighter in these places than on a simple surface.

To give the lamp made of PVC pipes the effect of 3D format, it is necessary to attach the parts that will protrude beyond the walls of the pipe, first you need to thin them with the same tips that were used when giving the light halftone, after doing these works we cut out the shape with special construction knife.

To give aesthetics and the final effect, we take a building hair dryer (it gives more intense heat), heat the form to a state of elasticity and bend it to the side. We leave the mold alone and wait for it to cool, when it cools it will remain in the same state in which you bent it during heating.

Such a lamp at the end of the work can not even be painted, the natural color of the pipes (white) will fit into the design of your house or apartment quite easily. But still, if you want to give the lamp a color design, then it will not take much time and a lot of effort, you just need paint from an aerosol can.

Upon completion of work from the sphere of scenery, it is worth moving on to works that will answer all practical questions. So, for the completed crafts, you need a very strong and stable shelf or base, at your discretion, because the lamp made of PVC pipes must stand steadily, since it weighs a lot and is also rather big in size.

As a light in your device, there can be various types of lighting using lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and deform the decorative shell. To give a more decorative lamp, you can use a garland during lighting, it will turn out very interesting.

For a true jack of all trades, the remains of building material are a real treasure. From a pile of rubbish, he is able to create masterpieces suitable for interior decoration and useful for everyday use. Remains of plastic, plumbing fittings, plugs, metal fasteners are enough to create a beautiful and functional pipe lamp that can be hung on the wall or used instead of a table lamp.

If the finished product seems unpretentious to you, you can complicate its design by adding metal parts - pipes, bolts, nuts, fitting legs

Self-assembly of lamps from pipes

Even people who do not know the basics of plumbing can build a product from pipeline segments, metal and plastic parts, and it will not be difficult for specialists involved in laying communications every day to come up with their own, unique, interesting options. The suggested instructions are just examples of how quickly and easily unnecessary materials can be turned into useful things.

A plumber's dream - a lamp from a water pipe

For the device of household communications, polypropylene is increasingly being used - a durable, flexible, reliable material that does not give in to rust, which has been performing its functions for decades. Systems are installed instead of obsolete metal pipelines, which are dismantled and thrown into a landfill. Let's take a few used iron parts and make a concise, convenient lighting fixture out of them.

We will need:

• 1 pipe of arbitrary length;
• 2 flanges for stands;
• cross as a connecting element;
• 2 knees;
• electrical cord with switch;
• lamp (energy-saving or LED);
• cartridge, clutch for fixing.

If the base diameter is 20 mm, respectively, the rest of the parts have the same cross section.

Strictly technical, rough lamps and cozy home floor lamps are all made from ordinary water pipes.

The assembly process is simple. We connect the knees and flanges with the cross - the stand is ready. We insert the pipe from above, then fasten the coupling. We pass the wires, be sure to make insulation, since the metal conducts current, we screw in the light bulb. A few simple manipulations - and the original lamp made of water pipes is ready!

In order to give the old details an aesthetically attractive look, we clean all the elements with fine sandpaper, cover with paint for metal.

Video: Functional robot lamp made of pipes and fittings

Wall lamp made of flexible metal-plastic

For the wall version, a more dynamic tubular LED lamp is needed, which can be directed in different directions, and here metal-plastic products will come in handy. Unlike plastic parts, they are durable, have elasticity, in other words, they bend.

The ability to bend and take on various shapes will help make the lamp unique

The base, which is mounted on the wall, for convenience, is best made from a piece of wood - solid pine, birch blanks, a fragment of thick plywood. We drill a hole in it for a flexible element. From a small bar we grind the body for the cartridge, given that a movable fragment will be attached on the other side.

A ready-made pipe wall lamp is a great backlight for paintings or photographs

All that's left is to assemble. We insert an electric wire, previously threaded through the base, into a metal-plastic blank (from 20 to 50 cm long), fix the cartridge and produce insulation. We fix the base on the wall, screw the LED element and enjoy the effect. It remains to be added that the flexible tube for the lamp can be turned in any direction, and if desired, even tied in a knot, if the length allows.

The cost of metal-plastic products of medium diameter is low - from 60 to 100 rubles per linear meter

Video: Plastic pipe LED lamp

Three-arm horizontal illumination

A convenient lamp made of several movable copper tubes on a metal base can create full-fledged lighting for a small room or a backlight for paintings, photographs, collages or shelves with souvenirs.

To work, you will need pieces of metal pipes of the same diameter, copper bending tubes for making horns, several tees (according to the number of horns), a half-flange (for fixing the lamp on a wall or ceiling), plugs, electrical wire and fasteners. You will also need lamps - it is better to take LED ones that do not heat the surrounding parts and the illuminated surface.

The tool needed for assembly is in every home:

• jigsaw or hacksaw for metal;
• pliers;
• screwdriver;
• drill and thin drills;
• insulating material;
• paint on metal, brush.

First you need to prepare the copper tubes, then unscrew the base and finally assemble everything into a single structure. We make horns for lamps from copper blanks 30-40 cm long. To do this, they need to be gently bent so that they take the form of a smooth arc. Beware of creases, as the corners on the tubes will spoil the appearance of the structure and will prevent the electrical wire from being threaded. We wind the compression fittings on the ends, thread the wires, fix and isolate the cartridges.

We clean the metal pieces, paint, after drying we twist a long pole out of them. We attach copper horns to it at regular intervals, not forgetting about the safe connection of electrical wires. We fix a do-it-yourself lamp made of pipes on a wall or ceiling so that the rays illuminate the desired area, screw in the bulbs and check. The design in a trendy industrial style is ready.

Plastic Tube LED Night Light

Plastic is easy to process, so there are plenty of opportunities for decorating ceiling lamps and lampshades made from this malleable material. Openwork lamps made of plastic and polypropylene pipes are installed on the floor, on the table, used as a table lamp, night light.

Beautiful designer lamp made of plastic elements and multi-colored light bulbs

We stock up on plastic blanks, get to work. The best option is products with a diameter of at least 15 cm, so that the walls of the finished lampshade do not come into contact with the lamp, even if it is LED. From the tools you will need a drill with various nozzles, drills, a clerical knife, a construction hair dryer.

Operating procedure:

• We are preparing the base - a heavy stand with a fixed cartridge, we are supplying an electrical wire. Suitable wooden block or construction of several parts.
• From a thick pvc pipe we cut out a segment 20-30 cm in height, we process the edges - this is the future lampshade.
• We apply an image on a plastic surface using a stencil - an ornament, a drawing, a pattern.
• Using a drill, knife, scalpel, we cut out the extra parts, making cuts, cuts, through holes. We leave some parts translucent, reducing the thickness of the material. We heat with a hairdryer to bend or deform the necessary elements.
• We install the lampshade on the base, turn on the lamp.

Video: Table lamp made of polypropylene pipes and fittings

White, not suitable for a bedroom or living room, the color of the plastic can be changed to a brighter shade by painting the surface of the lampshade with special acrylic paints. Finished lamps made of PVC pipes look just magical.

To connect the elements we use threads, bolts and nuts

Taking a cue from designers

The use of old unnecessary things to create unique interior items has long been of interest to designers, engineers, and self-taught craftsmen. Metal and plastic pipes turned out to be a convenient material for creating various lamps, chandeliers, table lamps, floor lamps, sconces. Some of them look modern, suitable for decorating high-tech offices and rooms, while others, elegant and stylish, are appropriate for a modern interior.

Elaborately carved flowers and butterflies transform a plastic pipe into an amazing decoration.

It is curious that magnificent design items that cost a lot of money are assembled from the most common building materials, which means that each of you, if desired, can create your own unique masterpiece, which is not inferior to well-known analogues either in appearance or in functionality.

It has been repeatedly stated that very unusual and spectacular products for interior decoration are obtained from materials that would seem not intended for this. A lot of decorative gizmos are obtained from disposable tableware, plastic containers, all kinds of cases, lids and corks. And almost anything is made from plastic bottles, from boats and rafts, to sofas and armchairs, from baskets, organizers and vases, to earrings, bracelets and rings. PVC pipes are no less successful, the purpose of which is to cope with sewer needs.

And now, it would seem, from such a prosaic, albeit practical, routine, plastic pipes go to a completely different level of being: skillful hands and imagination turn them into extraordinary, almost fabulous night lamps.

It is difficult to say who first thought of this idea, but today craftsmen from Brazil, Argentina, Australia, China are engaged in the manufacture of PVC lamps, and fans of this curious design technique have also appeared in our country. The manufacturing process is quite simple, even a teenager who knows how to handle power tools can handle elementary models. The lamp is made by applying through holes through which light will penetrate.

To make a lamp out of PVC pipes, you will need a drill with various nozzles: drills of various thicknesses and grinding nozzles with an abrasive. The pipe itself is chosen with a fairly wide diameter, from 20 to 50 cm, you need to focus on what place the lamp will take in the interior and what pattern will be chosen for application.

The simplest models of lamps can be made using the same type of perforation with a drill, complex, three-dimensional models include not only a pattern from holes of various diameters, but also working with pipe thickness, removing plastic in layers, as well as cutting and adding volume to some details of the composition.

Before starting work, we determine what size our lamp should be. Dimensions determine the diameter of the pipe and its height. Then we select the template of the desired pattern. It can be a simple ornament, a patchwork or floral motif, or a plot or a thematic picture.

The contours of the pattern are transferred to the surface of the PVC pipe in a convenient way, including paying attention to the top and bottom edges. When starting work, consider the required hole diameter when using different drills. Even just by making holes of different sizes along the contour of the picture, you can already get a finished lamp.

A more elegant drawing is obtained if light halftones are applied. This effect is achieved by removing PVC layers from the surface of the pipe. To do this, use abrasive nozzles on the drill. The more layers removed, the more light will be seen through.

If a 3D effect is needed, the contours of those parts that should protrude beyond the pipe are first thinned using the same abrasive grinding nozzles, then cut out with a construction knife. To shape them, they are heated with a hair dryer, preferably a building one, it gives more intense and uniform heating, and is bent to the side. When cooled, this shape remains.

A lamp made of PVC pipes will look in the interior and in white, so to speak, primordial color. But if there is a desire to have a color design, then this is easier to do, painted with PVC paint from an aerosol can.

After the decorative part is completed, it's time to take care of the practical side of the issue. For this lamp, you need a reliable heavy base, it will allow the lamp to become stable.

Energy-saving lamps are chosen as the light source for the PVC lamp, they will not overheat the decorated shell. Even more interesting is the use of LEDs, for example, light garlands. Then glow color effects are used, making the lamp even more attractive.

Want to reduce or increase stress? Buy a transformer 220-110. Affordable price and quality that will last you more than one year.

Creative ideas often appear unexpectedly and seemingly out of nowhere. But their material implementation gives such dividends that the costs of their implementation in reality seem scanty. Today we will try to make a decorative lamp out of a seemingly nondescript PVC pipe that will not leave anyone indifferent.

It will take

To materialize this creative idea into a beautiful product, we need to have:

• a piece of 10 cm PVC pipe about 30 cm long;
• paper;
• wooden box or timber 12 × 6 × 30 cm;
• a small piece of matte PVC plastic;
• electrical materials (wire, plug, cartridge, bulb).

You should also get:

• metal ruler and marker;
• dremel;
• milling cutter with nozzles;
• sickle knife;
• sandpaper;
• a can of aerosol paint;
• glue gun.

Algorithm for manufacturing a lamp from a PVC pipe

On the pipe blank, we mark a section 24 cm long. Using a sheet of paper, we make circular lines according to the markings on the side surface of the plastic pipe.

According to the circular markings, we cut off the excess from the plastic pipe blank with the help of a mini-grinder.

We place a wooden box on the desktop, which will serve as a template. Once again, we check its cross-sectional dimensions: they should be 12 × 6 cm, which is acceptable as a template for a PVC pipe with a diameter of 10 cm.

We twist a sheet of paper into a tourniquet and set fire to it from one end from an external source of fire (lighters, matches, etc.).
Thermal energy from a burning sheet of paper will be quite enough to soften the plastic pipe material, mainly on one side. This method is for those who do not have a building hair dryer.

Then, quickly, before the plastic has cooled down, we insert a wooden template inside the pipe and form a rectangular section from a circular section along the entire length, pushing the wooden box along the pipe until it appears on the other side of the pipe blank.

We leave the template in the pipe for a while until the plastic cools down and takes on a stable rectangular cross-sectional shape, after which it can be removed from there. After making sure that the shape of the rectangular plastic element turned out without flaws, we process the ends with a mini-drill, removing burrs and rounding the edges. The round ring left from cutting the plastic pipe is used as a template to reproduce the circle in the center of the wide side of the rectangular plastic element.
Using a manual milling cutter, we cut out a circle according to the marked markings and clean the edges of the resulting hole by changing the nozzle.

At a certain and equal distance from the edge of the hole, we outline 23 points, evenly spaced along the circumference of the large circle. We carry out 23 small holes of the same diameter according to the applied markings. Using a sickle-shaped knife, carefully remove burrs from all holes.

On the front side of the rectangular blank, where one large and 23 small holes have already been made, we mark two symmetrically located slots indented from the ends by 1.5 cm and also 1.5 cm wide, which will also pass along the sides of the blank, a little short of to the opposite wide side.

Carefully cut out the slits with a mini drill and cut-off wheel and remove the strips of plastic using a crescent knife. They also clean the edges of the slots.

On the back side of the workpiece of the lamp housing, from one end, we outline and drill two small holes with a mini-drill, one below the other, and clean them with a sickle-shaped knife.

With a small piece of sandpaper of suitable grit, we finally grind all the places of cutting and drilling of the lamp body.
We apply paint from an aerosol can on the future body of our homemade lamp and make sure that it lies evenly over the entire surface and without smudges.

In accordance with the dimensions of the lamp body 12 × 6 × 24 cm, we mark out a sheet of translucent PVC plastic for cutting and cut out a piece of 24 × 24 cm with scissors. Draw a marker along the ruler two straight lines parallel to the edges and at a distance of 6 cm from them.

We bend the plastic sheet along the drawn straight lines and get a U-shaped profile, which we insert into the lamp body so that the wide side lies against the front panel from the inside and overlaps the large and small holes.

We glue the U-shaped matte plastic with a glue gun to the lamp body in the corners and let the connection harden and seize.

We pass a copper two-wire wire through the upper hole made on the back of the lamp housing so that the cartridge at one end is inside the housing.

We attach an electric plug to the second end of the wire, and screw an incandescent bulb with a colored bulb with a power of not more than 5 watts into the cartridge in order to preserve the plastic from which our lamp is mainly assembled.

We plug the plug into an electrical outlet so that a light bulb lights up inside the body of our homemade product. As a result, we will witness an unusually beautiful glow of our decorative lamp, the effect of which will increase even more if placed in a dark place.

Attention!

Plastic dust is a serious hazard to your health, so a respiratory mask will be quite useful for the entire time you work on a lamp made of PVC pipe. Do not interfere with gloves and goggles.

One of the tools that help create a comfortable atmosphere in the house is a beautiful lamp. The stores offer a wide variety of models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having simple details available, you can make a unique design. With particular ease, plumbers can make such devices.

In this article:

We collect a chandelier from pipes

Ordinary chandeliers are chosen as the main source of light in the living rooms, in the kitchen and in the bedroom. To diversify the design of the room and stand out against the background of acquaintances and friends, a device made from improvised materials will help.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

• a ceiling lamp with a grate from an industrial lamp;
• two pieces of plastic pipes;
• the wire;
• plumbing tee and corner;
• two flanges, the same size as the cartridge;
• wooden block or other base;
• paint can;
• paper;
• screwdriver and screws.

First, disassemble the ceiling by removing the grille and cartridge, if a lamp with a grille looks good in your interior, then leave it. Screw the metal flange on the outside of the cartridge. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then successively attach the elbow, then another piece of pipe, a tee, and finally finish again with a flange. With each new part, do not forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to a wooden base. Don't forget to run out and connect the cables to the central system. The finished product can be painted in any color so that it fits the interior of the room. Don't forget to lay down some paper before doing this so you don't stain the floor. Screw in the lamp and, by clicking the switch, check the operation of the lamp made of PVC pipes.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can independently assemble wall lamps from water pipes with rotary lamps. To change the angle of incidence of light, it will be enough to turn the lighting device in the desired direction. During work you will need:

• flexible plastic pipes 20-50 cm long;
• solid birch, pine or thick plywood for the base;
• electric wire;
• cartridge and lamps;
• jigsaw;
• screwdriver and screws;
• spray paint and paper;
• sealant.

At the base we make holes that match the diameter of the pipe. From a small bar, cut out a place for attaching a cartridge, do not forget that a metal-plastic case will be supplied from the reverse side. Pull the wire through the flexible base and solid wood or plywood.

We insert the metal-plastic pipe into the base and fix it with screws or glue. We fix the cartridge in the prepared bar, and isolate the circuit with sealant. We paint the finished structure made of plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp for the cartridge - then the pipe lamp will look more attractive.

Table lamp made of muffs

Let's go back to the loft style, only now let's make a table lamp with one light source. It is suitable for home office or office. Depending on the chosen light source, such a product will help either focus or relax.

Necessary tools and materials:

• long and short nipple;
• fitting (six metal corners and three tees);
• six small nipples that will connect the corners;
• drill with a drill for metal;
• wire with plug and switch;
• glue;
• insulating tape.

Prepare metal parts by first cleaning them of grease stains with white spirit. Since the rein will need to be threaded through narrow holes, cut out the derailleur. Screw the lamp into the socket and insert it into the first square, before that, stretching the wire through the part. Fix the lighting device in the design position with glue.

In one of the tees, make a hole for the cable outlet. In order not to be mistaken with the place of drilling, imagine how the lamp will stand.

We fasten small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We fasten the corner in which the cartridge with the lamp stands to the long nipple, then comes the corner and the short nipple. We connect the two parts of the lamp together. Do not forget to stretch the wire in advance. Insert the switch back and test the table lamp.

Such lighting devices from parts of the pipeline will show guests and relatives your resourcefulness. Seeing the finished result, you will experience great joy and a sense of pride. DIY lamps will last a long time and will never go out of style.