Bar counter mount. DIY bar counter for the kitchen

The classic bar counter is a barrier table in a drinking establishment. Because of its convenience and versatility, it has found its place in people's homes, in the kitchen.

Designers use a huge number of methods and materials to create bar counters for the kitchen.

Unfortunately, it was quite difficult to make such an interior item on your own. But do not be upset, you should arm yourself with instructions, advice from professionals, and the creation of such a structure from wood, chipboard or any other material will become quite real.

Types of bar counters and their need

If there is enough space in the room, the counter serves its intended purpose: visitors are located near it.

Some notice that this design is really an indispensable item in the breakfast or coffee house.

The peculiarity of the racks lies directly in the filling itself: it is impossible without glass holders, wine glasses, various glasses, fruit vases, as well as a large number of other details.

Bar counters for a small kitchen are rarely designed due to limited space. But if the customer wants to equip his kitchen with a counter, then in such cases it is usually attached to the wall. This option is not at all standard, but very practical.

Installing bar counters in medium and large kitchens

When equipping a medium-sized kitchen, they come to the installation of a rack - a “peninsula”. This means that the rack is attached to some other piece of furniture. Reliable fastenings are needed due to the fact that the structure in its height differs from the workplace.

Note! Yellow kitchen: advantages and disadvantages of kitchen design with a yellow tint (75 photos)

Basically, straight or inclined pipes are used, they serve as a support for the rack.

To place your piece of furniture in a large kitchen, any placement method will do. In a large kitchen, even the installation of a free-standing island will not take up the necessary space for work. In addition, there is no obligation to use decorative details.

Sometimes designers come to the use of a plasterboard wall, to which the tripod itself is then attached. There are a huge variety of bar counter designs for the kitchen, since it is possible to combine different materials: for example, metal with wood, and sometimes even with glass.

Multifunctionality and practicality

In fact, kitchen counters are most often used in situations where you need to separate the kitchen area from the living area.

Studio apartments are usually small spaces, so the owners try to make the most of the available space. In this case, it usually comes out combining the bar counter with the kitchen-living room.

To place your piece of furniture as conveniently and practically as possible, you should heed a few tips: it is possible to install shelves, bedside tables, small cabinets under the counter.

You can hang a variety of mounts above it: on pipes-holders, or under the very ceiling. It is also possible to build a two-tiered kitchen counter.

Kitchen counter dimensions

The height of the kitchen bar is usually about 130 cm. It will be quite convenient to use it while standing, but in order to sit down, you should purchase a special chair.

But the width already has some conditions: usually it should be at least 30 cm: if the rack is narrower, it is simply not convenient to put dishes and other items on it.

For greater comfort, rack cabinets can be equipped with lighting. Usually, LED strips or lamps are used for this. This solution is a very big savings.

LEDs take a small amount of energy, they also do not have the ability to heat up and will last you a long time.

Types of bar counter bases

The metal base is classic. It goes through the countertop and rests with the first end on the floor and the second on the ceiling.

It is recommended to buy high-quality German or Polish pipes. Products from Chinese manufacturers look the same on the outside, but after a short period of time, the paint covering them will begin to peel off.

In the countertop, you need to make a hole for the riser and string the countertop onto the support. A stop nozzle, also called a “fixing ring”, is strung on the base end, with the part visible to the eye, everything is closed with an artificial overlay.

Fasteners are used to fix the tripod. Shelves, holders, etc. are attached only after the rack is installed. When the countertop is along the wall, it is fixed thanks to decorative brackets. For the strength of the structure and reliability, they are placed as close to each other as possible.

How to attach the rack to the wall?

The bar counter in the corner kitchen is attached to the wall with the help of corners. For this procedure, you should buy reliable corners.

There are two types of corners: simple and reinforced. The latter are used for heavy and massive structures. A tabletop, created by oneself, usually rests on one corner, and more massive ones on several.

Kitchen interior with breakfast bar

In sufficiently large rooms, the rack can be located in the middle of the kitchen, while it forms an island.

Quite often, in the designs of kitchen studios, a stove and a sink are placed on this island, and the bar counter towering above them from the side of the guest room closes them.

In addition, the design will appeal to amateurs and culinary professionals.

For the final choice of your kitchen design, we offer you to see photos of the bar counters in the kitchen. We are sure that this will help you decide and make a choice.

Photo of a kitchen with a breakfast bar

The western piece of furniture in the form of a high table and graceful chairs still does not go out of fashion, more and more surprising with new configurations and designs. Bar counter accessories are indispensable devices that provide additional storage space for kitchen utensils, food and drinks. Modern manufacturers offer many options for different designs for every taste and budget. When choosing accessories for a bar counter in the kitchen, it is worth remembering their original purpose and purchasing only what is really useful in the household.

Bar counter equipment: pros and cons

The bar counter performs a number of important functions: it zones the space, is used as a dining table or simply serves as an interior decoration. It can be single-level or multi-tiered, with or without shelves. The most important factor is that it harmoniously fits into the overall interior and does not clutter up the space. A round bar counter is suitable for spacious rooms, and a rectangular compact one will look good in a small kitchen.

The presence of accessories and equipment has its advantages and disadvantages. Of the advantages of accessories, one can distinguish the rational use of space, especially when installing a multi-level structure. It is possible to organize the working and dining area so that each item is in its place, and everything you need is at hand. Finally, bar counters for the kitchen with stylish accessories and lighting delight guests, becoming the highlight of the interior.

However, if you overload the design with shelves and accessories, especially in a small kitchen, the room will visually decrease, become cramped and bulky. In addition, the bar counter will have to be cleaned much more often from dust and dirt that accumulates on appliances, glasses and roof rails.

Varieties of accessories

Accessories for the bar counter are classified according to the type of fastening and purpose. All accessories are usually made of metal, sometimes combined with tempered glass. You can choose the most successful option, which will be combined in color with other interior items: copper, gold, chrome, bronze, and also choose a matte or glossy finish.

Fastening classification

Bar shelves of the central type, which can be round or cone-shaped. These include a fruit bowl, glass holders with special recesses for legs, niches for storing cutlery, small items, condiments, etc. They are mounted on a pole passing in the center of the shelves.

Swivel (side) shelves for bar counters with the help of mounting on the railing, which extends to the side, have the ability to rotate around its axis. Such bar fittings will become indispensable if there is not enough space for table setting, because it can always be removed to the side. It includes: a round fruit bowl, a cone-shaped shelf for storing kitchen utensils, as well as a single or triple hanger on which you can hang the necessary cutlery.

Hanging system for storing glasses, bottles and glasses, which is not attached to the bar, but to the ceiling. Thanks to this design, the kitchens, photos of which can be viewed on the website, look especially stylish and modern.

Classification by purpose

Bar shelves in which you can store kitchen utensils.
Hangers with hooks for hanging napkins, cups, ladles, etc.
Designs for storing glasses and bottles.

Hanging baskets for the bar counter are a very original accessory if the design is adjacent to the wall. They can be multi-tiered and fastened with hooks like a railing on an apron.

Mounting methods

To install a multi-level system of shelves, you will need a bar pipe with a diameter of 5 cm. When choosing a material, give preference to brass or nickel - they are the most durable and easy to use. The rod is fixed with the help of flanges to the ceiling and to the floor and with the help of side fasteners to the wall. Rails are put on the pipe for the bar counter, which allow you to adjust the height of the shelves. Such holders allow you to change the rack configuration by adding or removing new elements.

The bar pipe itself and everything that is fixed on it with the help of various holders

Choice of equipment

Accessories for the bar counter should be selected in accordance with its purpose and the volume of the room. If the piece of furniture is considered as a table for a snack, then it would be advisable not to overload it with accessories, but to build a small shelf or cabinet. In the absence of a bar, this option would also be appropriate, since the bar leg, as well as a solid structure with a tabletop, does not imply central and swivel shelves.

For those who like to cook a lot, it is recommended to install hangers with hooks for storing kitchen utensils, which should always be at hand. You will also need a fruit bowl and a side shelf for small items. Hosts who prefer to have fun with friends can get a hanging system for glasses and beer mugs. A similar design with backlight will look very impressive.

In order for the bar pipe not to remain empty, it is necessary to install swivel-type shelves that do not interfere with table setting and are easily moved to the opposite side. In addition, guests do not have to reach far for the desired item.

And finally, a short video with an overview of the various universal shelves for the bar.

The bar table, if it is in the kitchen, is statistically used even more often than the dining table. When purchasing a bar counter, think in advance what accessories you will need, do you need a hinged bar system, central and side shelves, or will it be enough to hang a small cabinet?

Pros and cons of equipping a bar counter

Accessories for a bar counter in the kitchen have their pros and cons.

Pros:

this is a great solution if there is not enough storage space;
the central and side shelves are very convenient and functional to use.

Minuses:

the need to regularly dust bottles, glasses, appliances;
a large number of accessories overloads the space, the owners need to be especially careful with filling the rack.

Types and types of bar counter equipment

Accessories and fittings are different in terms of fastening method, shape, materials and purpose.

According to the method of attachment, we can distinguish:

Central shelves for the bar, which are mounted on the pipe in the center;

Side or rotary shelves, which are attached to the pipe to the handle that extends to the side;

Suspension systems that are not attached to the bar and pipe, but to the ceiling.

The shape of the central and side shelves are cone-shaped or round.

According to their purpose and functions, bar accessories are divided into:

Holders for glasses;
Bottle holders;
Universal - for storing things, dishes, food and serving;
Hangers for cutlery, mugs, napkins, etc.

Accessories and fittings are most often made of metal or a combination of metal and glass. But the following metal variations can be in color: gold, bronze, copper, glossy and matte chrome.

The color of accessories and furniture fittings must match the color of the kitchen fittings. Read more about the combination of colors in the interior of the kitchen.

What furniture fittings are needed to create a multi-level shelf structure?

First of all, you need a pipe that performs the function of a foot and a base-fastener for the shelves. It is made of brass or nickel and most often comes in a diameter of 50 mm. The pipe (or rod) is fixed to the rod holder to the floor, side-mounted to the wall and / or to the ceiling with a ceiling mount. The bar counter is also attached to the countertop with a special flange.

How to choose the right package

Let's figure out what will really be necessary, and what is better to refuse so as not to clutter up the space.

Choosing accessories for a bar counter is necessary based on its purpose. In what capacity is it most often used: as a home bar for parties and celebrations, as a table for breakfast and snacks, an additional surface for cooking, working at a computer, or simply as an accessory that separates?

If the bar counter is for you, first of all, a place to relax with friends, then complete it with a multi-level composition of: a holder for glasses, a central shelf for bottles, a side shelf for serving and storage. If the kitchen and the counter itself are large, and you want to create the atmosphere of a real bar, then install a hinged system as well.

Using more than three shelves is only permissible if your bar counter is a bar counter, and not a breakfast table.

If you often cook at the bar table or want to use it to store kitchen utensils, then you will need: triple hangers with hooks on which you can hang ladles, a side serving shelf, a universal central storage shelf (preferably with high sides) and desired glass/bottle holder. But, if there are children in the house, then, of course, it is better to refuse this idea.

In other cases, it will be enough to hang rails on the wall with hooks for appliances, baskets for plants. Or you can just have a small cabinet or shelf for storing glasses, drinks, dishes and other items that you most often need at breakfast or while working at the computer. From the central and hanging shelves, if they are not urgently needed and your kitchen is not full, it is better to refuse.

Having made a modern renovation in your kitchen, you will think about a bar counter that will fit perfectly into the overall interior and make it more relaxed.

Location

It is suitable both for a separate dedicated kitchen and for a studio apartment in which the rack is able to zone the space without overloading it. The bar counter in the interiors of apartments is popular abroad, where people are known for their love of snacks, however, for Russians, eating is a kind of ritual, and therefore the design has acquired its own characteristics.

As a rule, the counter is located in the kitchen.
This design is not able to replace a full-fledged dining table, but is only its addition.

Varieties

The classic version of the design is based on high consoles. Such a rack has a height of 1.1–1.15 m. In order for this type of rack to fit well into the interior, it is worth choosing chairs with high seats for it.

Combined rack, i.e. combined with a dining area. Accordingly, the bar counter will have the same height as the work surface (0.9 m) and suitable chairs (0.6 m) should be chosen for it. This is done mainly for convenience.

If the structure is combined, then it will have two heights. That is, a higher-level countertop plays the role of a bar counter, and a lower element acts as a dining table. This method is often used when zoning the kitchen and living room. In this case, the dining area is located on the side of the kitchen, and the bar area is located on the side of the living room. With proper design, this option is quite convenient.

Another option is when the bar counter is installed in the center of the kitchen with a large area. In this case, the rack is a continuation of the hob and sink. This model is not suitable for everyone, but also finds its connoisseurs.

Bar arrangement

If the area of \u200b\u200byour apartment is quite large, you can equip a separate full-fledged bar that will not belong to the kitchen. In such a bar there is a place for washing, a refrigerator for drinks and lockers with a variety of alcohol.

With this arrangement, the bar counter fully fulfills its original functions and is a place of rest where you can have a drink. This option is relevant for small families living in a studio apartment. In this case, the structure can be located anywhere in the room.

Unfortunately, the range of bar counters in stores is small. As a rule, you can find accessories for it: shelves, lighting, countertops, accessories. It is necessary to select and equip everything in such a way that the design is combined with the general interior of the room in which it is located.

Manufacturing

In order for a bar counter to appear in your interior, you need to decide on the material for its manufacture. For this you can use: wood, glass, chipboard, natural or artificial stone, metal and combinations of these materials. Corin is mainly used for finishing the tabletop, which is durable and available in a wide range of colors. From it you can easily make the desired shape that is suitable for your room.

In the manufacture, it is not necessary to make the countertop of the same material as the work surface.

Equipping the rack, you need to competently and beautifully use the space above it. Shelves and canopies for wine glasses, fruit baskets, napkin holders can be placed here. By making such a multifunctional "tree", you use the space and decorate the room.

If you have a small kitchen, it is not necessary to deny yourself a bar counter. In this case, it is combined with the dining area, but is made slightly higher than the table. Do not make the rack too high, as it will look out of place in a small room. The best option would be to continue the work surface or countertop, that is, the location in the same plane with the rest of the items.

It is necessary to prepare the following tool and material:

level;
perforator;
metal profiles;
drywall;
dowel;
self-tapping screws;
putty;
putty knife;
dye;
screwdriver;
cutter;
grater for smoothing putty;
sealant;
roller, brush and tray for painting.

Determine the dimensions of the structure - the width, length and height of the rack. The main thing is to be comfortable behind her.
At the next stage, a metal frame is made.
In the manufacture of the frame, it is very important to give it sufficient rigidity. To do this, corners can be made from a solid profile, for example, cut two of its walls with scissors for metal and then bend an angle of 90 °. You can strengthen the bend with the help of a cutter or by tightening the screws.
So, the UD guide profile is fixed to the wall and floor. Dowels are used for fastening. It is necessary to make two frame walls.
They should be connected to each other with a transverse profile. Each profile is also fastened with a cutter.
If it is necessary to connect two profiles perpendicularly, crabs are used.

If you want to install a backlight on the bar counter in the future, then wires should immediately be brought into the structure, leaving the conclusions outside. When the frame is completely ready, check it for stability. After that, you can proceed to fixing the drywall. Self-tapping screws should be slightly recessed into drywall. After they will be easier to putty, and paint the entire surface of the bar.

After installing drywall, each joint must be puttied with a mounting grid. This will prevent cracks from appearing.

If at the end of work there are places where the rack does not adhere well to the wall or floor, these cracks can be treated with sealant. Skirting boards are installed at the floor.

To work, you will need the following set of materials:

beam 50 × 100 mm;
edged board 25 × 300 mm;
MDF sheets 18 mm thick;
plinth;
molding;
self-tapping screws;
acrylic sealant;
dye.

The manufacturing process is as follows:

At the first stage, a design project is developed. At the end of the article, ready-made drawings of bar counters will be presented. You can use a ready-made project or upgrade it a bit to suit your individual needs. At this stage, you should decide what the length, height and width of the structure will be.
Now, starting from the finished project, you can begin to manufacture the frame. To do this, mark the future frame on the wall and floor by drawing the contour lines of the future location of the bar counter.
Fasten the beam to the floor and wall along the marked lines.
It is also necessary to install support posts and cross beams for mounting the tabletop. Determine the height of the racks so that the top of the countertop is flush with the work area in the kitchen. In this case, each vertical rack should be installed in level.
Between themselves, the racks are connected by transverse bars. For fastening, you can use furniture corners.
When the frame is assembled, it is sheathed.
For sheathing, you can use MDF sheets. They will additionally give the structure the necessary rigidity.
The tabletop is made of edged board, which is sanded and varnished.

All wooden elements of the rack should be treated with special anti-corrosion compounds to increase moisture resistance and to protect against fire.

Fill all gaps between the bar counter, wall and floor with acrylic sealant. The ends of the installed countertop should be closed with a molding.

A brick bar counter is a truly solid structure, which is highly durable. If the apartment has a wooden floor, then the creation of such a structure will have to be abandoned.

For construction, you will need cement mortar and bricks. The design will look like a parallelepiped. Row after row, brickwork is laid out, fastened with mortar. For facing such a rack, facing red brick is better suited, the laying of which is carried out for jointing. As for the countertop, it can be made of natural stone, wood or MDF board.

Bar counters can also be made from natural stone. For example, polished granite is a great option. The surface is not afraid of moisture, sharp objects, hot and cold, and no stains remain on it.

In order for the installed stone worktop to have a finished look, its edges are decorated with a decorative chamfer.

There are a number of advantages to using natural stone:

strength;
heat resistance;
ease of care;
a wide variety of colors and patterns;
durability;
resistance to various influences of reagents.

When you think over the design of the bar counter, try to comply with the measure. That is, the design should not be overloaded with many items and details. It is worth starting from three basic rules:

Functionality. Decide what you want from the bar and when designing, take into account all your preferences so that in the end it turns out to be as convenient as possible.
Division of space. In the case when it is necessary to zone the room, the rack should play this role.
The beauty. The rack should be not only comfortable, but also aesthetic, fit perfectly into the overall design. The combination with all other pieces of furniture is a strict requirement that the design must meet.

A photo

Blueprints

Using the provided diagrams and drawings, you can design and make a bar counter yourself:

Saving usable space is the problem of the majority. What kind of tricks do home craftsmen go to so that there is at least a little more space. Recently, more and more often they stop at such a solution as a do-it-yourself bar counter, which carries several useful functions at once, without requiring large financial costs. In today's article, we will talk about the possibilities of its self-assembly in various with step-by-step instructions and photo illustrations of manufacturing.

The choice of the type of such a structure will depend entirely on the requirements that apply to it. Consider the main types of bar counters that you can mount yourself.

Wall construction. The tabletop is attached along the wall, under it are located for various small things. This type of bar counter saves free space and is used as.

Island option. The countertop is mounted in the middle of the kitchen. It can be used as a dining or. The option is only applicable to .

Peninsula. This rack is an L-shaped (rarely U-shaped) tabletop, one of the long sides of which adjoins the wall and is used as a work surface. The rest can be used as a dining or buffet table.

Mobile view. In fact, this is not even a bar counter in the usual sense, but an elongated table on wheels that can be placed anywhere, and then removed so as not to interfere. However, such a construction has the right to exist. Such bar counters are used instead of a table.

The number of legs for the bar counter can be different. It all depends on the length and width of the tabletop. For short bar counters, you can get by with one foot.

wall bar table

Bar counter in the kitchen: height from the floor and other optimal parameters

The dimensions of the bar counter depend on the dimensions of the room, but there are certain generally accepted norms. The height is usually 1.1-1.3 m for freestanding bar counters designed for zoning rooms. If the countertop is adjacent to, then it must match it. In this case, the height will be 85-90 cm. Most often, such racks serve as a dining or working area. There are bar counters for the most - 75 cm from the floor. They can be used as a full desktop.

The width of the bar counter for the kitchen should not be less than 30 cm. Otherwise, there can be no question of any functionality. The best option would be a size of 80 cm, however, with small dimensions of the kitchen, you can reduce it to 55-60 cm.

The length of the bar counter is calculated depending on the number of people who will be behind it at the same time. For a comfortable location, one person should have at least 60 cm.

Making a bar counter in a loft style: what is required for this, step-by-step instructions for the production of work with photo examples

The bar counter is more, after all, applicable in cafe-bars. That is why we chose a similar room for step-by-step instructions. For work you will need:

solid wood board, 30-40 mm thick for countertops;
boards, 10-15 mm thick for finishing;
, self-tapping screws;
grinder;
spray paint in cans;
nails, ;
PVA glue.

The basis for the bar counter will be a support made of foam concrete, into which self-tapping screws are easily screwed. We will not dwell on today - this is not difficult and it makes no sense to deviate from the topic.

Do-it-yourself bar counter: step-by-step instructions for making a loft-style design

Consider all stages of work:

Illustration	Action Description
	We attach a wooden tabletop to the base of foam blocks and polish it perfectly. You can choose any shape of the future rack. Between themselves, the tabletop boards are joined at an angle of 45 ° and glued with PVA.
	The cladding board is painted (any color can be chosen), and after drying, it is superficially cleaned with a grinder. This action allows you to "expose" the structure of the wood, making it clearly visible.
	On the base of the foam block we fasten the slats on which the lining will be fixed. The slats are fastened with self-tapping screws, which are quite easily twisted into the foam block.
	With the help of nails we fix the lining on the rails. Boards can be fastened evenly along the entire length, and it is possible to place them in parts in a chaotic manner - this will give clarity to the structure of the tree.
	Lastly, cover the countertop with paint. In our case, black is chosen (after all, this is a night bar), and for the home, you can choose lighter colors. It is better to use car enamel as a coating - it gives more shine. The finish coating with varnish will not interfere either.

Useful information! If you don’t want to do woodworking, you can buy a finished bar countertop or order it at any furniture workshop. Instead of a foam block base in an apartment, it makes sense to use LSTK (light steel thin-walled structures), which are sheathed with plasterboard.

Quite often, drywall with a light steel frame made of metal profiles is used as the basis for a bar counter, which is subsequently finished with various materials for a certain style. We will definitely talk about the technology of assembling the base from today - we have no right to miss this topic, but first we will consider the option of making a bar counter for a wooden house.

Bar counter made of wood: tools, materials, manufacturing nuances

These are pretty common. Wood is an environmentally friendly material - it is this fact that most attracts home craftsmen. Indeed, in the conditions of gas contamination of modern megacities, you always want to have an island of natural nature in your apartment.

What you need to make a bar counter for a wooden house

For work it is necessary to prepare:

beam 50 × 50 mm for mounting the frame;
sanded board or MDF panels for cladding;
, square;
drill, hammer, nails, hacksaw;
sanded board, 40-50 mm thick for countertops;
furniture varnish.

Step-by-step instructions for creating a wooden bar counter for your home

Let's study the step-by-step instructions with a photo:

Illustration	Action Description
	The first thing to do is to assemble the frame of the structure. When doing this work, be careful with the angles - they must be exactly 90 °, otherwise the rack will be crooked. For convenience, it is better to use a square.
	Facing can be made from any material. In our case, this is plywood. Pay attention to the checked box - this element is optional and serves more for aesthetics than for practical purposes.
	Having cut and laid the countertop in place, we close its ends with decorative slats. Instead, you can use aluminum or plastic lining, sold in furniture fittings or household goods stores.
	Now you should carefully sand all surfaces and corners. We run our hands over them - no joints should be felt. Next, we clean the surface of dust, treat it with an antiseptic and. After complete drying, cover all surfaces with furniture varnish.
	For aesthetics, we stuff decorative strips around the perimeter. Previously, they can be covered with stain, which will add contrast. It is also possible to color the slats in a color suitable for the interior of the room.

As you can see, such work will not be particularly difficult, but it will require care and accuracy from the home master.

How to make a drywall bar with your own hands: a few tips for beginners

The algorithm of actions is almost identical to the previous version. It can be used as a material for the frame, however, to facilitate the construction, it is better to make it from a thin-walled metal profile. The tool will need the same as in the previous case, with the exception of a hammer and nails - there will be no sense from them here.

All work is done in the same way as making a wooden bar counter, so there is no point in dwelling on step-by-step instructions in detail. Let's just say that later, after facing the frame with drywall, you can use any materials for finishing, be it simple or, or any paint.

Making a bar counter in a stone apartment: difficulties and nuances

If we are talking about natural stone, then we cannot do without difficulties. This requires certain knowledge and skills. Today, many are replacing natural, which looks no worse, but is much lighter and cheaper. In order to make such a bar counter, it will be necessary to lay out a foam block support, similar to the first option described in today's article. After, with the help of a mortar or special glue, the base is lined with stone.

The countertop will have to be ordered or purchased ready-made - hardly any of our readers have their own marble or granite processing workshop. The marble countertop is considered the most practical - the stone does not scratch, practically does not get dirty, but the emerging dirt is easily erased with a simple rag.

Important! If you decide to install a bar counter made of stone, pay attention to the floors. If a wooden coating is laid, it will have to be disassembled - the wood may not withstand the weight of a massive structure.

Bar counter for a small kitchen: folding design and making it yourself

If there is very little space in the kitchen, you can make a bar counter, which will be laid out as needed, and then removed, which will free up usable space. Now let's figure out how to make it.

Often there are home craftsmen who expect to make such a design adjacent to the wall with a narrow side. Let's say right away that if one person sits at such a counter, then this is possible, but no more. After all, its length in this case will not work more than a meter. That is why the junction is performed only along the long side. The only possible way will be in which the countertop will not fall, but rise to the wall.

The algorithm for performing work and the necessary material

To make such a design you will need:

hinged hinges along the length of the tabletop;
pipe-emphasis on hinges with a seat on the wall;
mounting level;
countertop (the lighter it is, the better).

We choose a place along the wall, convenient for location. We measure the required height from the floor and draw a horizontal line using the mounting level, along which we fasten the hinges. We fix their second part with self-tapping screws from the end of the countertop along the long side. From below, closer to the outer edge, we fasten the pipe-stop on the hinge. Now, having laid the level on the countertop, we find an ideally horizontal position and mark on the wall or floor under the counter the installation site for the stop seat. Having fixed it in place, we can consider the work finished.

Now that the Dear Reader has figured out in general terms the possibility of making various types of bar counters with your own hands, we suggest that you familiarize yourself with photo examples of finished structures.

Examples of bar counters in the interior of a studio, home, cafe

The examples below will help a novice home craftsman who is just thinking about making a bar counter to decide on a style. Also, the appearance of structures can lead to any thoughts. All presented bar counters are made by home craftsmen on their own.

Do-it-yourself bar counters in apartments, studios and cafes:

Bar counters for the kitchen: photo examples of designs with prices

Not everyone has the time or desire to independently carry out all the work on the manufacture of such structures at home. We offer you to get acquainted with examples of ready-made bar counters that can be purchased. All prices are correct as of October 2018.

Bar counter «Dorset (150)», walnut. Differs in minimalism, but its cost suggests otherwise. You can buy a similar design at a price of 15,500 rubles.

Bar counter Chivas

Beautiful bar counter "Andrea", which is suitable for the style of "Retro". The length of the structure is almost one and a half meters, the width is 51 cm. It is used for countertops. The cost of this product is 32,700 rubles, while the master will have to assemble it himself. Although you can pay extra for the assembly of 3000 rubles. and the experts will do it.

Bar counter Andrea

Another option for the style of "Retro" - "Gordian Classic" with dimensions 100×100×60 cm. Made of natural pine. On the inside there are shelves - a minibar. Cost - 20,500 rubles. It is possible to order an identical oak bar counter, but in this case the cost increases to 50,000 rubles.

Bar counter It's Wine Time! Classic 2

Looking at the cost of the presented models, you involuntarily begin to wonder: isn’t it better to spend not too much time and make a bar counter for your apartment yourself?

Summing up

The bar counter in the apartment is a relatively new trend, which means you can always come up with something unusual, original. You always want your apartment to be different from others. Remember that in such work everything is limited only by the flight of your imagination. The main thing is to have enough strength and means to bring the idea to life. Indeed, only in this case, the home master will feel satisfaction from the work done, and the bar counter made by him will not only be an aesthetic moment in decorating the interior, but will also bring practical benefits in saving space.

A tabletop made from a saw cut of a solid log is “aerobatics”:

We hope that the information presented in today's article was useful to our Dear Reader. Despite the fact that we tried to convey it as fully as possible, you may have any questions during the review. If so, you can ask them in the discussions below. The editors of the site will be happy to answer them as soon as possible.