Do-it-yourself pipe lamp. How to make an original lamp from pvc pipes Make a do-it-yourself floor lamp from plastic pipes

How to make a beautiful street lamp yourself? We will show you unusual and simple ways to decorate your yard with beautiful street lighting.

Street lamps made from natural materials.

An unusual and stylish street lamp can be made in autumn from a grapevine. As a template, we need an inflatable beach ball. We wrap the vine around the ball, securing the intersections with wire for structural rigidity.

After our improvised vine ball is ready, we blow off the ball and carefully pull it out.

Inside such a ball, you can place it as a solar lamp, and wrap it with an LED strip for outdoor lighting. Such tapes often have a color switch, then with the help of a remote control you can change the color of your street lighting.

Beautiful street lamp with your own hands.

A beautiful street lamp in the form of a stream of light can also be made using LED strip.

For more convenience in the garden, it is better to use a solar-powered LED strip.

We fold the light cord in half - this is how we form “the jets of our stream”. We fix a bunch of light cord inside the teapot using a large metal washer and threading the cord through the spout of the teapot.

Here is such a wonderful outdoor lamp that can decorate your entrance to the house or gazebo in the garden.

How to make a street lamp from a log.

Natural material such as logs is one of the most harmonious materials for garden decor.

Cut the log into rings, making a hole in the middle. Inside we install a transparent plastic pipe or a plexiglass pipe. Add an LED strip and a stylish garden street lamp is ready to decorate your garden.

And from hemp you can make a chandelier for a gazebo.

This is what its simple design looks like.

A small tip - in order to accurately select the middle of the stump, you can cut it in half, and then carefully glue it.

Just a wonderful option for a street lamp - simple and effective.

Here is an option on how to use street lamps from saw cut logs to illuminate garden paths

By installing an LED lamp inside a hollow split log, you will get an unexpectedly spectacular result.

Unusual street lamp "Drop".

A glass flask for watering flowers plus an old water tap - and you are the happy owner of an unusual street lamp in the form of an amazing drop of light.

You can buy a glass flask at a houseplant store. We will also need a crane stand and metal wire for the solar powered LED strip.

We wrap the LED strip around the wire and fill the flask with it.

We install our design on a flower bed.

And admire our wonderful street lamp!

Rope street lamp.

A stylish round lampshade made of jute rope can decorate an ordinary street lamp.

We moisten the rope well with PVA glue, immersing it in a bath of glue, then wrap it around the ball.

Let dry and blow off the ball.

We paint the lampshade with paint.

We raise a standard solar-powered street lamp to the desired height using a metal pipe.

We install lampshades on the lamp. When the flowers rise in the flower bed, our lamps will look very cute.

Or you can take care of a beautiful support for our lamp.

We often come across articles that describe how you can create unusual, but at the same time useful things for your house or apartment from unnecessary materials, which, for example, were left after repairs. Also, crafts can be made from plastic bottles, disposable tableware, corks and the like. But in this article we will talk about material such as PVC pipes, which, according to the rules, are needed and used in the sewer system, but now we will describe how to make a useful thing out of this material, such as a PVC pipe lamp.

From a completely simple and inexpensive material, you can create something fabulous and fantastic, the most important thing here is to have skillful hands and a rich imagination, the rest is up to the small. Thanks to these good qualities, you can create beautiful and beautiful night lights in the form of lamps.

In fact, we don’t know who first thought of this idea and created such beauty as a lamp made of PVC pipes, but nowadays people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such needlework, but ours is no exception. country Russia.

To carry out a beautiful craft, we will list the materials and tools that we will need during the work:

1. A drill with a sufficient and diverse set of nozzles that have different thicknesses and can still be distinguished by the types of grinding, we need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide for a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

PVC pipe wireless lamp

If you do not want to spend a lot of time and effort on making a pipe lamp, then the work can be done with just one drill. But if you want to perform a drawing that is voluminous and complex in its composition, then for this you need to include in the work the execution of small to large holes, complex rhinestones, work with the thickness of the pipe walls, removing the outer layers to add volume and aesthetics and, of course, giving the effect 3D to some details.

Before we start making patterns and rhinestones on a lighting device, let's decide what size we need a lamp. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let's move on to choosing templates and stencils for the desired picture that you want to depict on your device. As patterns, a floral look of a picture, a landscape or a banal ornament, and the like, the choice of your taste can serve.

The silhouette of the selected pattern is transferred to the pipe in a very simple, but at the same time convenient method, at the same time, attention is paid to the edges at the top and bottom. Before you begin, consider the desired size of the holes in the pipe in diameter so that the drills fit your ideas. A very simple option can serve as a good idea, for example, you don’t need to draw and cut out various patterns, you can simply cut out a beautiful decorative lamp using the drawn holes of various diameters.

A very elegant drawing is obtained when light halftones are used in the work. Such an effect and quality can be obtained when the outer layer of the pipe, that is, PVC, is removed with the help of abrasive tips. The more layers you remove, the greater the transparent effect will be and the light will be much brighter in these places than on a simple surface.

To give the lamp made of PVC pipes the effect of 3D format, it is necessary to attach the parts that will protrude beyond the walls of the pipe, first you need to thin them with the same tips that were used when giving the light halftone, after doing these works we cut out the shape with special construction knife.

To give aesthetics and the final effect, we take a building hair dryer (it gives more intense heat), heat the form to a state of elasticity and bend it to the side. We leave the mold alone and wait for it to cool, when it cools it will remain in the same state in which you bent it during heating.

Such a lamp at the end of the work can not even be painted, the natural color of the pipes (white) will fit into the design of your house or apartment quite easily. But still, if you want to give the lamp a color design, then it will not take much time and a lot of effort, you just need paint from an aerosol can.

Upon completion of work from the sphere of scenery, it is worth moving on to works that will answer all practical questions. So, for the completed crafts, you need a very strong and stable shelf or base, at your discretion, because the lamp made of PVC pipes must stand steadily, since it weighs a lot and is also rather big in size.

As a light in your device, there can be various types of lighting using lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and deform the decorative shell. To give a more decorative lamp, you can use a garland during lighting, it will turn out very interesting.

Making very beautiful pipe lamps

Do-it-yourself volumetric lamps amaze our imagination with a magical play of light and shadow. But no less surprising is that these strikingly beautiful lamps are made from an unexpected, simple and very affordable material for everyone.

The use of PVC pipes as the basis for a lamp provides wide and unusual manufacturing possibilities. You can cut through the pipe, you can make partial shadows by simply removing the thickness of the pipe, you can make three-dimensional compositions by carefully bending parts of the pipe.

As the author of these lamps Ademar Rocha says, to make a lamp, you need a hand drill with a set of various nozzles, and a building hair dryer, which allows you to give the cut parts of the pipe the desired curved shape.

Drill nozzles allow you to process the edges of the volumetric parts of the lamp, make texture and surface cuts on the pipe, which will create the necessary halftones in the intended light composition. All this will give the lamp a neat finished look.

Of course, our lamp needs a fairly heavy stand, which will give stability to the vertical structure.
For fire safety, it is better to use an energy-saving light bulb that heats up minimally.

LEDs can also be used as a lamp in such a lamp. These are not only safer, but also give more options for color illumination.
Because LEDs allow you to change the color of illumination, then your lamp can delight you with green, red and golden colors. In addition, LEDs practically do not heat up.

Such a lamp, carefully made with your own hands from an ordinary pipe, will be an unexpected gift for Valentine's Day. And such a musical lamp will be appreciated by a music fan. Such a lamp can be made from overlays of two pipes of different diameters.

The surface of the lamp can be painted, and then, when turned off, it will fit better into the interior of your room.
For the lamp, pipes of various diameters can be used. For example, this chandelier shade is made using a dot-cut method from a wide pvc pipe.

Not only volumetric lamps are beautiful, by drawing the desired pattern on the pipe, and making dots on the pipe along its contour, you will get a beautiful lamp that is simple in execution, but wonderful in result. Use not only through, but also translucent holes, so your lamp will be more interesting.

For a true jack of all trades, the remains of building material are a real treasure. From a pile of rubbish, he is able to create masterpieces suitable for interior decoration and useful for everyday use. Remains of plastic, plumbing fittings, plugs, metal fasteners are enough to create a beautiful and functional pipe lamp that can be hung on the wall or used instead of a table lamp.

If the finished product seems unpretentious to you, you can complicate its design by adding metal parts - pipes, bolts, nuts, fitting legs

Self-assembly of lamps from pipes

Even people who do not know the basics of plumbing can build a product from pipeline segments, metal and plastic parts, and it will not be difficult for specialists involved in laying communications every day to come up with their own, unique, interesting options. The suggested instructions are just examples of how quickly and easily unnecessary materials can be turned into useful things.

A plumber's dream - a lamp from a water pipe

For the device of household communications, polypropylene is increasingly being used - a durable, flexible, reliable material that does not give in to rust, which has been performing its functions for decades. Systems are installed instead of obsolete metal pipelines, which are dismantled and thrown into a landfill. Let's take a few used iron parts and make a concise, convenient lighting fixture out of them.

We will need:

• 1 pipe of arbitrary length;
• 2 flanges for stands;
• cross as a connecting element;
• 2 knees;
• electrical cord with switch;
• lamp (energy-saving or LED);
• cartridge, clutch for fixing.

If the base diameter is 20 mm, respectively, the rest of the parts have the same cross section.

Strictly technical, rough lamps and cozy home floor lamps are all made from ordinary water pipes.

The assembly process is simple. We connect the knees and flanges with the cross - the stand is ready. We insert the pipe from above, then fasten the coupling. We pass the wires, be sure to make insulation, since the metal conducts current, we screw in the light bulb. A few simple manipulations - and the original lamp made of water pipes is ready!

In order to give the old details an aesthetically attractive look, we clean all the elements with fine sandpaper, cover with paint for metal.

Video: Functional robot lamp made of pipes and fittings

Wall lamp made of flexible metal-plastic

For the wall version, a more dynamic tubular LED lamp is needed, which can be directed in different directions, and here metal-plastic products will come in handy. Unlike plastic parts, they are durable, have elasticity, in other words, they bend.

The ability to bend and take on various shapes will help make the lamp unique

The base, which is mounted on the wall, for convenience, is best made from a piece of wood - solid pine, birch blanks, a fragment of thick plywood. We drill a hole in it for a flexible element. From a small bar we grind the body for the cartridge, given that a movable fragment will be attached on the other side.

A ready-made pipe wall lamp is a great backlight for paintings or photographs

All that's left is to assemble. We insert an electric wire, previously threaded through the base, into a metal-plastic blank (from 20 to 50 cm long), fix the cartridge and produce insulation. We fix the base on the wall, screw the LED element and enjoy the effect. It remains to be added that the flexible tube for the lamp can be turned in any direction, and if desired, even tied in a knot, if the length allows.

The cost of metal-plastic products of medium diameter is low - from 60 to 100 rubles per linear meter

Video: Plastic pipe LED lamp

Three-arm horizontal illumination

A convenient lamp made of several movable copper tubes on a metal base can create full-fledged lighting for a small room or a backlight for paintings, photographs, collages or shelves with souvenirs.

To work, you will need pieces of metal pipes of the same diameter, copper bending tubes for making horns, several tees (according to the number of horns), a half-flange (for fixing the lamp on a wall or ceiling), plugs, electrical wire and fasteners. You will also need lamps - it is better to take LED ones that do not heat the surrounding parts and the illuminated surface.

The tool needed for assembly is in every home:

• jigsaw or hacksaw for metal;
• pliers;
• screwdriver;
• drill and thin drills;
• insulating material;
• paint on metal, brush.

First you need to prepare the copper tubes, then unscrew the base and finally assemble everything into a single structure. We make horns for lamps from copper blanks 30-40 cm long. To do this, they need to be gently bent so that they take the form of a smooth arc. Beware of creases, as the corners on the tubes will spoil the appearance of the structure and will prevent the electrical wire from being threaded. We wind the compression fittings on the ends, thread the wires, fix and isolate the cartridges.

We clean the metal pieces, paint, after drying we twist a long pole out of them. We attach copper horns to it at regular intervals, not forgetting about the safe connection of electrical wires. We fix a do-it-yourself lamp made of pipes on a wall or ceiling so that the rays illuminate the desired area, screw in the bulbs and check. The design in a trendy industrial style is ready.

Plastic Tube LED Night Light

Plastic is easy to process, so there are plenty of opportunities for decorating ceiling lamps and lampshades made from this malleable material. Openwork lamps made of plastic and polypropylene pipes are installed on the floor, on the table, used as a table lamp, night light.

Beautiful designer lamp made of plastic elements and multi-colored light bulbs

We stock up on plastic blanks, get to work. The best option is products with a diameter of at least 15 cm, so that the walls of the finished lampshade do not come into contact with the lamp, even if it is LED. From the tools you will need a drill with various nozzles, drills, a clerical knife, a construction hair dryer.

Operating procedure:

• We are preparing the base - a heavy stand with a fixed cartridge, we are supplying an electrical wire. Suitable wooden block or construction of several parts.
• From a thick pvc pipe we cut out a segment 20-30 cm in height, we process the edges - this is the future lampshade.
• We apply an image on a plastic surface using a stencil - an ornament, a drawing, a pattern.
• Using a drill, knife, scalpel, we cut out the extra parts, making cuts, cuts, through holes. We leave some parts translucent, reducing the thickness of the material. We heat with a hairdryer to bend or deform the necessary elements.
• We install the lampshade on the base, turn on the lamp.

Video: Table lamp made of polypropylene pipes and fittings

White, not suitable for a bedroom or living room, the color of the plastic can be changed to a brighter shade by painting the surface of the lampshade with special acrylic paints. Finished lamps made of PVC pipes look just magical.

To connect the elements we use threads, bolts and nuts

Taking a cue from designers

The use of old unnecessary things to create unique interior items has long been of interest to designers, engineers, and self-taught craftsmen. Metal and plastic pipes turned out to be a convenient material for creating various lamps, chandeliers, table lamps, floor lamps, sconces. Some of them look modern, suitable for decorating high-tech offices and rooms, while others, elegant and stylish, are appropriate for a modern interior.

Elaborately carved flowers and butterflies transform a plastic pipe into an amazing decoration.

It is curious that magnificent design items that cost a lot of money are assembled from the most common building materials, which means that each of you, if desired, can create your own unique masterpiece, which is not inferior to well-known analogues either in appearance or in functionality.

One of the tools that help create a comfortable atmosphere in the house is a beautiful lamp. The stores offer a wide variety of models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having simple details available, you can make a unique design. With particular ease, plumbers can make such devices.

In this article:

We collect a chandelier from pipes

Ordinary chandeliers are chosen as the main source of light in the living rooms, in the kitchen and in the bedroom. To diversify the design of the room and stand out against the background of acquaintances and friends, a device made from improvised materials will help.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

• a ceiling lamp with a grate from an industrial lamp;
• two pieces of plastic pipes;
• the wire;
• plumbing tee and corner;
• two flanges, the same size as the cartridge;
• wooden block or other base;
• paint can;
• paper;
• screwdriver and screws.

First, disassemble the ceiling by removing the grille and cartridge, if a lamp with a grille looks good in your interior, then leave it. Screw the metal flange on the outside of the cartridge. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then successively attach the elbow, then another piece of pipe, a tee, and finally finish again with a flange. With each new part, do not forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to a wooden base. Don't forget to run out and connect the cables to the central system. The finished product can be painted in any color so that it fits the interior of the room. Don't forget to lay down some paper before doing this so you don't stain the floor. Screw in the lamp and, by clicking the switch, check the operation of the lamp made of PVC pipes.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can independently assemble wall lamps from water pipes with rotary lamps. To change the angle of incidence of light, it will be enough to turn the lighting device in the desired direction. During work you will need:

• flexible plastic pipes 20-50 cm long;
• solid birch, pine or thick plywood for the base;
• electric wire;
• cartridge and lamps;
• jigsaw;
• screwdriver and screws;
• spray paint and paper;
• sealant.

At the base we make holes that match the diameter of the pipe. From a small bar, cut out a place for attaching a cartridge, do not forget that a metal-plastic case will be supplied from the reverse side. Pull the wire through the flexible base and solid wood or plywood.

We insert the metal-plastic pipe into the base and fix it with screws or glue. We fix the cartridge in the prepared bar, and isolate the circuit with sealant. We paint the finished structure from plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp for the cartridge - then the pipe lamp will look more attractive.

Table lamp made of muffs

Let's go back to the loft style, only now let's make a table lamp with one light source. It is suitable for home office or office. Depending on the chosen light source, such a product will help either focus or relax.

Necessary tools and materials:

• long and short nipple;
• fitting (six metal corners and three tees);
• six small nipples that will connect the corners;
• drill with a drill for metal;
• wire with plug and switch;
• glue;
• insulating tape.

Prepare metal parts by first cleaning them of grease stains with white spirit. Since the rein will need to be threaded through narrow holes, cut out the derailleur. Screw the lamp into the socket and insert it into the first square, before that, stretching the wire through the part. Fix the lighting device in the design position with glue.

In one of the tees, make a hole for the cable outlet. In order not to be mistaken with the place of drilling, imagine how the lamp will stand.

We fasten small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We fasten the corner in which the cartridge with the lamp stands to the long nipple, then comes the corner and the short nipple. We connect the two parts of the lamp together. Do not forget to stretch the wire in advance. Insert the switch back and test the table lamp.

Such lighting devices from parts of the pipeline will show guests and relatives your resourcefulness. Seeing the finished result, you will experience great joy and a sense of pride. DIY lamps will last a long time and will never go out of style.