Homemade handles for a walk-behind tractor. Attachments for walk-behind tractors - improvement and modernization of the main working bodies

Today's peasants cannot imagine their activities without special equipment. Most assemble attachments for a walk-behind tractor with their own hands, since this machine goes on sale with a minimum set of additional tools for cultivating the land.

For summer residents and residents of rural areas, where it is required to cultivate sufficiently large areas of land, this technique is a real savior, allowing you to perform the intended work quickly, efficiently and without heavy physical effort. Only the walk-behind tractor itself is of value as a tractor; to perform various land works, you need to purchase or make attachments with your own hands.

There are a lot of additional tools for this machine, so buying them is profitable only for large farmers and those who are engaged in the implementation of land work to order. But in order to process sufficiently small areas of land or in order to save money, you can create all these tools with your own hands. Often experts advise nevertheless to purchase a hitch in a store, since it plays a rather important role in work and has a universal type. It is simply necessary for walk-behind tractors, with its help attachments are attached, such as: a plow, a trailer, a potato planter, a hiller and much more that is needed in the work of a farmer. Unfortunately, this coupling unit does not come with the equipment, so it will have to be purchased separately. But many craftsmen, in case of unsuccessful searches for a coupling, make it themselves.

How to make a coupling knot?

This part must be made of durable material, as it is the link between the tool for work and the traction force of the walk-behind tractor. This assembly must have strong fixing elements on both sides.

To make it, you will need the following tools and materials:

Metal or channel. You will need them to create the main body of the node.
Fasteners in the form of bolts, nuts and steel rods.
In order for the position of the unit to be changed, you need to think over which adjustment element is needed. It should be a solid and metallic lever.
To assemble this part of the walk-behind tractor, you will need a welding machine, a set of keys, drills and a drill for metal.

Such self-made devices must correspond to the dimensions and carrying capacity of the machine. The assembly must have sufficiently strong fastening parts and fit in size to the main equipment.

Of course, you need to make a universal coupler, since it will be possible to attach to it, both home-made devices and purchased ones.

The universal assembly is assembled in the following sequence:

To begin with, you need to take 2 U-shaped metal arcs of the same size, channel bars are perfect for their manufacture. In each metal plate you need to drill holes: in one - 6 pcs., And in the other - 8 pcs.
The body is a more complex part and is assembled using a welding machine. He must clearly measure and drill holes for the connecting elements, and on one of the brackets it is necessary to think over how to make a movable connection.
The most difficult thing in this work is the manufacture of a lever, or rather, the very mechanism for adjusting the position of the walk-behind tractor. Its main parts are the screw, bracket and handle.

To carry out this work, it is recommended to use a special machine on which it will be possible to grind all the necessary parts. When the hitch is assembled and ready for use, it is worth checking the strength of its attachment and fastening of the working attachment for the walk-behind tractor.

Hinged devices for the walk-behind tractor

In order to cultivate the land and perform a number of agricultural work on a small-sized tractor, you will need the following additional devices:

Rake.
Plows.
Hillers.
Potato planters and potato diggers.
Harrows.
Weeding machines and mowers.
Wood splitters.
Sprayers.
Rotary tillers.

All these devices will sooner or later be needed, but most often they are used, a rake, a plow, tillers and devices for planting and collecting potatoes.

How to make a hiller?

The simplest homemade attachment is a hiller. To assemble this device, you will need the following tools and materials:

2 disks of the same size made of durable metal. They can be made independently, or taken from an old seeder.
Bolts, nuts, metal axles and washers, plain bearings.
T-shaped metal frame.
Racks - 2 pcs.
To correctly adjust the angle of rotation of the discs, you need to purchase screw lanyards.

Adapters are located in the center of the disks, with their help, they are attached to the frame. The stands should ideally be mounted on such devices so that the distance between the discs can be further adjusted. The rest of the parts are assembled by welding and bolting.

Potato digger

This device is indispensable during the harvesting of tuber crops, especially potatoes. It is not so easy to do such homemade products for a walk-behind tractor with your own hands. Before work, it is necessary to create drawings of attachments and think through every detail.

The frame, as the main body, is welded from metal corners or channels. It must be strong and stable enough.

For direct collection of tubers, 1 or 2 metal plates with rounded edges are needed, this is done so that they do not cut the potatoes. You will also need metal rods that are welded to the plate. Together, this design is called a plowshare - it is a moving part of this device.

An equally important piece of equipment is the editorial hub. To make it, you need to purchase 2 metal cylinders, they are designed to connect 2 bushings that ensure the interaction of the shafts.

Body for cleaning tubers. It is quite difficult for an inexperienced craftsman to make it. To assemble it, you need to purchase roller chains, steel rods, it is with their help that you need to assemble a structure that in its appearance will resemble a squirrel wheel. This wheel must be firmly fixed on 2 special rods so that the drum can rotate.

Correctly assembled parts will allow this device to be used in work for many years, and a high-quality result will delight.

Snow removal device

It is not difficult to execute it; to create it, you need to prepare 2 metal pipes and brackets. The so-called dump can be made from sheet metal. The rods are connected to its body by welding, and the brackets make it possible to fix its angle of inclination and location relative to the coupling unit. This moving part can be taken from used self-propelled equipment.

Potato planter

In order to assemble this attachment yourself, you need to prepare the following parts:

The frame is the main supporting element, it can be welded from metal corners and channels.
A metal axle must be attached to the frame, to which the wheels will be attached.
A potato hopper is attached to the bottom of the frame.
The sprockets must be correctly attached to the frame and connected to the adjusting mechanism.

Particular attention must be paid to correctly adjusted sprocket placement, as this will affect the distribution of tubers in the soil during planting. The wheels on this device can be of different diameters, it all depends on the dimensions of the walk-behind tractor and attachments.

Some craftsmen manage to create universal devices for earthwork, for example, by adding or removing any parts, you can create a potato planter from a motor-cultivator, and the rake can be easily converted into harrows by changing the main nozzles on the frame. If you approach this issue competently and competently, then you can gradually assemble all the necessary tools for household and agricultural work on a walk-behind tractor.

After purchasing a walk-behind tractor, you begin to think about expanding its functionality through additional devices. Useful homemade products for a walk-behind tractor can be made by hand.

Rake

If you wish, you can make a special rake for the walk-behind tractor. If the capture of hay is planned to be wide, then pipes designed for a water supply system of various diameters can be put into operation. The easiest way to do it is from a round rod.

It is easier to connect individual parts for welding, which will ensure the strength of the structure. There is a way to simplify the design even more: do not put bearings on the swivel parts. To make it easier to transport the rake, it is worth considering the possibility of folding. Photos of homemade products for a walk-behind tractor clearly show how the structure is assembled.

Dump

The walk-behind tractor is sometimes used to level the soil and ground, as well as to clean the tracks from snow cover. This is possible when using a special blade, which can be made by hand from a one to two millimeter sheet of steel. Stiffeners are made of thicker steel.

They are fastened through special holes. The direction of the row of holes must be strictly vertical. It is advisable to fix the sheet metal to the bottom of the blade in order to prevent burying.

Seeder

Different seeders can plant 1-5 rows in one pass. Seeder types:

Vegetable.
Precise seeding.

With vegetable seed drills, it is good to sow roots and onions. The movement of the feed mechanism is carried out through the drive, and the rotation speed can be changed by changing the stars in the drive system.

The second type of seeders is distinguished by the presence of a brush in the seeding mechanism. The seeds in the container are tidied up with a brush and poured out through the hole in the back. The size of the hole can be changed using a cover disc. The seeder is connected to the walk-behind tractor through a universal coupling. Such homemade equipment will save a lot of money.

Shovel

You can use a homemade dump shovel to remove snow from the tracks. It is not difficult to make it using an ordinary grinder, welder and drill. You can use a metal barrel as a base.

It should be cut into 3 pieces and then welded on 2 of them. The result is a shovel blade three millimeters thick. This thickness is more than enough to fulfill the assigned tasks.

Disc hiller

You can equip your walk-behind tractor with a hiller with your own hands. You should start by selecting old lids from saucepans, preferably stainless steel, with a diameter of forty to fifty centimeters. Sharpen the edges of the lids and, if necessary, shape the lids into a cone.

The next step is to make a hiller frame from pipes, to which the discs from the covers will join. The completed assembly can be tested in the field. If necessary, the angle of inclination of the discs is adjusted.

Crow's feet milling cutter

You can make it even without the skills of working with metal. It is made non-separable and therefore it turns out to be quite durable. The cutter can also be used on other types of agricultural machinery, if they have a similar axle diameter.

Self-made units are not much inferior to counterparts from the store. Such a hitch significantly expands the capabilities of technology and facilitates work on your site.

Of course, walk-behind tractors and accessories for them can be bought. But why spend money if you can show your skills and create a unique unit.

In order to increase the capabilities of the walk-behind tractor, it is enough to equip it with various attachments. For all models, manufacturers have developed numerous add-ons, the use of which makes it easier to work on the ground.

On sale you can find plows and seeders, hillers, furrow diggers, sledges. The choice, of course, is large, but many cannot afford the cost of such equipment. But it is quite possible to make it on your own from cheaper or used materials.

How to make a flat cutter with your own hands?

A practical addition to the walk-behind tractor is a flat cutter. This is an indispensable assistant who creates beds, weeds and spuds plantings, levels, falls asleep, loosens the ground. The possibilities of such a nozzle are almost endless.

If you place the blades of the plane cutter on the left and lead in the same plane with the soil, then you can weed or loosen the ground. Raising the appliance slightly, the blades turned to the left will mow tall weeds. If the blades look down, then it is easy to create beds with them.

A flat cutter will again help to form grooves for planting and fill in the seeds. This is the function of the burier.

You can use the Fokin flat cutter as a hitch for a walk-behind tractor. He has the necessary holes for hanging on the structure. If a flat cutter of a different size is required, then you can make it yourself. Drawings and a small metal workpiece will help with this.

The metal must be of sufficient thickness and strength so that in the future it can act as a blade. The sheet is heated with a blowtorch and bent according to the pattern. When the plane cutter has obtained the required shape, it is cooled with water. In order for this workpiece to become an attachment, it is necessary to make holes for fasteners and sharpen the workpiece with a grinder.

A sheet of metal can be replaced with a piece of pipe, to which pieces of metal are attached like blades. They need to be sharpened.

Sizes and features of the manufacture of hedgehogs

A tiller with an attachment for growing potatoes will save time and effort when caring for this crop. Weeding hedgehogs are a functional attachment that allows you to quickly and efficiently defeat weeds. In the process of weeding, the plants are not simply cut, but uprooted. The land around the plant is well loosened and huddled. Thanks to this, the plant not only gets rid of weeds, but also receives a sufficient amount of water and oxygen.

Hedgehogs can be purchased at almost any agricultural store, but at a fairly high price.

Based on the diagrams and drawings, you can make them yourself.

Components for hedgehogs:

3 discs made of metal or a ring;
a small piece of pipe with a diameter of 30 mm;
steel rods for cutting thorns.

Preferably use rings instead of discs which will lighten the whole structure. The sizes of rings for making hedgehogs of a walk-behind tractor are different. The most common are 240x170x100 mm or 300x200x100 mm. The rings are attached to the pipe through jumpers. The connection should be made at an angle of 45 degrees with a distance between the elements no more than 15-18 cm.

The spikes, cut from a steel rod 10-15 cm long, are welded onto the rings and the axle itself. Depending on the size, they are attached to a large ring in the amount of 15 pieces, to a small one - 5. Also, several pieces can be welded onto the axle.

To facilitate work with the design, a walk-behind tractor with hedgehogs is equipped with additional wheels.

We make a snowblower bucket with our own hands

The walk-behind tractor will come in handy on the farm not only in summer, but also in winter. It is often equipped like a snow blower. It is enough to make a bucket for a walk-behind tractor, and an iron assistant will do the hard work.

A snow shovel is usually made from a 200 liter iron barrel. You will also need metal strips, a square pipe, rubber and steel plates and fasteners - bolts, nuts. From tools - pliers or pliers, drills and drills for metal, wrenches, grinder, welding machine.

The side parts are cut out with a grinder at the barrel. Then the workpiece is cut into three pieces. Two of them are welded along the contour. The remaining third of the barrel needs to be divided into metal strips, which will be the bucket knives. Three 6mm diameter holes are drilled into them for attachment to the edge of the bucket. Instead of a barrel, you can use a metal sheet, which will need to be bent by heating.

A strip of metal is welded to the bottom of the bucket to make it heavier. The metal strip is completely covered with rubber to prevent wear. Then the bucket is attached to the walk-behind tractor. To protect against corrosion, a homemade bucket is primed and painted.

You can turn a walk-behind tractor on wheels into a snowmobile using a trailer and winter wheels... With the help of the channel, the trailer is fixed to the frame. Used truck cameras are used instead of expensive wheels. On each wheel, the deflated chamber is secured with chains and inflated again. Equipping a snowmobile machine is quite simple and homemade sleds.

How to design a trencher?

A homemade trencher is a hinged attachment to a walk-behind tractor that allows you to quickly and effortlessly dig trenches and holes. It is a kind of compact excavator that is both maneuverable and economical. Moves on a wheeled or tracked chassis.

Digger attachment allows you to dig trenches and holes even in frozen ground... The walls of the trenches are flat, without shedding. The excavated soil is light and crumbly and can be used for backfilling.

Two cutters are fixed on the front suspension, on the rear - a shovel for extracting soil from the trench. It is imperative to attach safety guards to the cutting discs and the chain drive. By the same principle, a drill bit is made from a metal rod and plates.

Manufacturing of other suspended structures

The walk-behind tractor can be equipped with a variety of useful devices - a plow, a rake, all kinds of shovels, mowers, skis, brushes. Desire, clear diagrams and description of work will help to repeat store counterparts of hinged elements and even improve them, since they will correspond to individual requirements and conditions.

So, to cultivate the land, a plow is needed that can overcome virgin soil overgrown with grass, wet or stale soil. To make it, you need a steel plate with a thickness of about 5 mm. Using the rollers, the plate is bent into a cylinder. The edges are sharpened with a grinder.

The resulting homemade plow is hung on the stand of the walk-behind tractor through the hitch.

By the same principle, it is easy to make a furrow-forming attachment. It is good if there are stands from the cultivator. They can be attached to the corner or made two racks from scrap materials. For this, plates are cut from a metal sheet with a thickness of 1.5-2 mm. The size of the plates should correspond to the depth and width of the furrow. They are attached with bolts to the struts of the structure. You can use such a nozzle for instillation... One has only to give the plates the required shape. They should be in the form of a disc or circle, located at a certain angle. From above, such plates are located closer than below. Due to this, the discs, while rotating, open the cavities outward.

The attachment to the cranberry walk-behind tractor contains a self-propelled crawler platform. The intake is fixed on the swing frame of the platform. It is made in the form of a box with bent parallel teeth. Moving, the device with the help of the fan pulls the berries into the box. The fan is powered by the engine... Screw-shaped spirals are installed in the box.

Plucked cranberries are heavier than garbage, so they fall to the bottom of the container. Leaves, small specks that fall along with the cranberries, are removed through the hole along with the air flow from the fan.

A brush for a walk-behind tractor is used to clean the area not only from leaves, but also from shallow snow. Simplicity, efficiency and versatility of use are the obvious advantages of this hinged element. A brush shaft is vertically attached to the walk-behind tractor. A ring and discs with brushes are alternately put on it. The diameter of the rings is 350 mm. The width of the grip of such a brush is usually made no more than one meter. So the walk-behind tractor remains maneuverable and covers a fairly large surface area for cleaning.

The length of the bristles is 40-50 cm, otherwise it will soon begin to wrinkle and wrinkle. It will not be possible to restore the properties of the bristles, just attach new discs. The speed of the walk-behind tractor with a hinged brush fluctuates in the range of 2-5 km / h, depending on the engine power of the unit.

For information on how to make a plow for a walk-behind tractor with your own hands, see the next video.

The most effective equipment for a summer residence in rural areas and for a country house is a walk-behind tractor. Only as a device, the walk-behind tractor itself is useless. In order to work with it, you need attachments.

For the owner of small plots, buying sheds for his walk-behind tractor will not be very unprofitable. But for the owner of a large plot, the purchase of high-quality equipment will quickly pay off. But, what to do, already having a walk-behind tractor on the farm and not being able to buy additional equipment for it? The answer is simple: make attachments for walk-behind tractors with your own hands.

How to make attachments for walk-behind tractors with your own hands

In principle, most equipment is very simple in design and can be easily made from what is at hand. However, you still have to buy a hitch for awnings. And you can make other devices like a potato planter, potato digger, lugs, seeder, hillers yourself.

Homemade hiller for a walk-behind tractor

To make homemade hillers for the walk-behind tractor, you need to take two metal discs 2 mm thick and place them opposite each other so that they open outward.

When we have found the correct angle of the discs, we need to bolt the hiller or just weld it on.

Now we need to fix it on the hitch we purchased to the walk-behind tractor and go!

Homemade potato planter

The device of a homemade potato planter is somewhat reminiscent of a hiller. Here, too, there are two disks at the bottom, but on top there is a special bowl into which potato tubers are poured. From the hole in the bowl, the tubers fall into the ground, and the potato planter discs are arranged to bury them with every step.

In order to make a homemade potato planter, we need to assemble the frame, wheels and wheel axle, steel pins, tuber hopper, chain sprockets and an adjusting mechanism. When making a canopy, pay attention to the frame, because this is the main organ of the potato planter.

All other organs are attached to it. Close the wheels in front with a metal plate, without it the potatoes will fall out of the bunker when we don't need it.

Select and adjust the potato planter adjusting device correctly. This is necessary in order to properly distribute the planting material in the soil. Tighten the hopper from below with rubber so that the potatoes do not fall out in vain. The potato planter can be operated on a wide variety of wheels.

How to make grousers for walk-behind tractors with your own hands

In order to make them yourself, you need to have several blanks, a grinder and a welding machine.

In order to make lugs, you can use old rims from a car. Take out the steel angle, it will then be our teeth on the lugs. Take the axle shaft and attach the bearing to it.

Weld a square plate into the center of the rim so that its corners touch the edges of the rim. To be sure, we make holes in the plate and additionally bolt it to the disk. We attach the half shaft from the inner side of the disk to our plate.

When our wheel is ready, let's go into the hooks for it. Earlier, we said that you need to buy a steel angle in order to later redo it by hand. So, we cut the corner with a grinder into parts, fold every two segments into a corner and fasten them with a welding machine.

The hooks that we got must be placed on the rim of the disc at a distance of 15-20 cm from each other.

The second method of making homemade lugs

There is another way to make lug wheels. It will come in handy if you have an old waste gas cylinder and no lugs. We cut off a circle (rim) from a cylinder with a width of five to seven centimeters, the circumference of the rim should be 30 cm.

After that, we make hooks from a 40 mm metal plate and, as in the previous version, we fasten them at a distance of 15 cm from each other. In addition, we weld an additional plate to each hook in its center, which creates an additional "tooth" of the lug.

Add another 60 cm to the edge of each hook - this is for greater penetration into the soil. We weld a square plate to the rim of one of the metal discs, on which the lug axis will be.

Homemade trailer for a walk-behind tractor

Now we will consider the design and capabilities of a homemade trailer for a walk-behind tractor. Sometimes manufacturers themselves do not make them for the walk-behind tractor on sale, or they make them of poor quality, often they bend when transporting cargo, where the trailer is connected to the wheels. The best is a home-made trailer for a walk-behind tractor, it will be 2-3 times cheaper and, accordingly, more reliable.

To begin with, we make the body of the future trailer. To do this, we take steel pipes with a rectangular section or we can use corners as in the case of lugs. We need to cut pipes at right angles with a grinder and then we can sheathe the body with wood or metal. Attach the driver's seat to the front. So you can operate the walk-behind tractor with a cart while sitting and holding it by the walk-behind tractor control handles.

When our body is ready, it's time to think about how our cart will ride. We need to make the wheel axle by taking the rear axle from the car, removing the gearbox from it. You can also use as an axle a metal rod, turned around the edges so that you can put on the wheels for the trolley.

When the trailer is ready, you still need to attach it to the walk-behind tractor. To hitch a trailer with a walk-behind tractor using a swivel knot. To make it, we take a pipe with a rectangular cross-section and weld it to the lower edge of the cart so that a regular triangle is formed, and the edge of the body is the base of this triangle.

We also mentioned the manufacture of the pivot assembly. It is a cylinder with a console on two bearings. This design of the device allows the wheels of the trolley and walk-behind tractor to move independently of each other.

Below you can see drawings of a standard trolley for a walk-behind tractor.

Attached homemade equipment - cutters and plows

One of the main attachments for a walk-behind tractor are cutters and a plow. Only milling cutters are used only on soft and constantly cultivated soil, and the plow is used on virgin soil. Also, the plow is more expensive and not every summer resident can afford it. But, in principle, this article itself was created for those who want the entire set of attachments and do not want (or cannot) pay for it.

For a homemade plow, take a metal plate with a thickness of 3 to 5 mm and a pipe, the walls of which should be 5 mm thick. We will also need to make a plow body.

At the beginning, we take a metal plate and sharpen it as we would sharpen a braid. Let's make a dump out of the plate. To do this, you need to cut it out with a grinder. The ploughshare looks like a trapezoid, you can see its sample below. Now we attach the pipe. And we also need a homemade share. We will replace the purchased one with a circular saw blade. We now attach all the parts made by us to the plow body and attach them to the walk-behind tractor through the hitch.

Motoblocks and attachments to them: video

And now, for a clearer idea of what attachments can be, we present to you a video with a possible canopy for a walk-behind tractor.

We make a reversible plow for a walk-behind tractor with our own hands

Earlier, we considered the possibility of using a plow (homemade) instead of a milling cutter as an attachment for a walk-behind tractor. Both the milling cutter and the plow perform similar functions, but differ in the quality of processing. The reversible plow also differs from the standard one.

Such a plow has a complicated design, in which the body is equipped with a curved feather on top. Thanks to this structure, the reversible plow not only plows the land, but also turns over the layer of land that has been plowed. This is useful when working with heavy soil.
The device of a reversible plow is much more complicated than that of a conventional one, and only a professional can make a reversible plow on their own. It can be very difficult to choose the right quality blanks and not make a mistake anywhere in the process.

In order to assemble such a plow yourself, you need to know what to assemble from, that is, what parts you need to make first.

To make Zykov's plow with your own hands, you need to make a stand with which you will hook the plow to the walk-behind tractor, the plow body with a share, a field board (thanks to it, the plow becomes more stable) and a feather with which the earth turns over.
The dump of this plow is made from a pipe half a meter in diameter with a wall thickness of 5 mm. We turn on the welding machine to cut out the blade, which we then grind with a grinder. For the body of birches, a steel plate with a thickness of 2-3 mm.

Probably, there is nothing more useful for processing a land plot than a walk-behind tractor. But he is useless without attachments, it is this that gives the walk-behind tractor such functionality. This material was conceived as a kind of review telling which articles on the topic "Do-it-yourself attachments for a walk-behind tractor" are published on our website.

We make attachments for walk-behind tractors with our own hands

Homemade lugs

Lugs, another device that are put on instead of wheels and provide the walk-behind tractor with better grip on the ground, thereby ensuring good cross-country ability and stability when performing heavy work. In the material "", you will find detailed information, supplemented by video and drawings, on the manufacture of lugs using car disks and other materials at hand.

Blade for walk-behind tractor

A blade for a walk-behind tractor is a front attachment that allows the walk-behind tractor to remove snow and perform other work with leveling the soil. In the article "", you will find comprehensive information on the manufacture and operation of this hinge.

Homemade adapter for walk-behind tractor

The adapter is probably the most demanded attachment that is in great demand. The reason for the popularity lies in the ease of use of the walk-behind tractor. Instead of following the walk-behind tractor on a bumpy field, you can use the adapter and just drive like a mini tractor. Also, the adapter assumes hanging additional equipment on it, which makes working on the walk-behind tractor comfortable and easy. The topic "" describes the design features, purpose, manufacturing stages, as well as media materials, such as videos, diagrams, drawings, allowing you to make an adapter yourself.

We hope this information is about attachments for motoblocks, and their manufacture. It will be useful to you. We have plans to describe all types of equipment used in working with a walk-behind tractor. Follow our reviews, write reviews, give advice, comment.