Silent compressors: a recognized need. How to Choose a Silent Compressor Powerful Silent Compressor

• This equipment, in spite of the quiet operation mode, is practically not inferior in technical parameters to bulky and noisy industrial installations designed for high load and long-term use.
• The capacity of the offered compressors, depending on the model, ranges from 60 to 650 liters of air per minute. For comparison: the same parameter of a conventional piston device reaches only 520 liters per minute.
• The pressure created by such a compressor varies from 3 to 13 atm. In this case, the power is from 0.75 to 4 kW, and the required mains voltage is 220 or 380 V.
• The range includes various models of compressor equipment with a low noise threshold, manufactured at foreign enterprises under the brands Comprag, Remeza, etc.

To buy a quiet air compressor from EnergoProf, contact the company's employees. Phones are listed in the header of the page and in the "Contacts" section. The product range includes a large number of low-noise compressors of various capacities. Please read our offer carefully before purchasing.

For a high-quality painting of a car, an air compressor is needed, which will ensure an even spray of the paint and varnish material. In case of occasional use, an inexpensive reciprocating compressor with average technical characteristics is sufficient. It's another matter if the compressor has to work in production almost around the clock - you can't do without powerful semi-professional, or even industrial equipment. Of course, any purchase, including a budget one, must be justified by the reliability of work and the corresponding service life. Say, this does not happen, and you need to take a compressor at a higher price right away? We disagree with you, because we are already familiar with the rating of the best compressors of different classes and, accordingly, different price categories. It remains only to choose one of them for your task.

The best household compressors

T. n. garage compressors are designed for short, small jobs. Pneumatic equipment with high air flow rates, for example, spray guns with HVLP technology, must not be connected to them. Painting a car for such a unit is a feasible task, but it takes 2-3 times more time. This is explained by the fact that the duration of its continuous operation usually does not exceed 10-15 minutes, otherwise it quickly overheats and in the absence of a thermostat fails. Hence the conclusion - even a high-quality household compressor is subject to careful operation and requires a competent selection of pneumatic tools in terms of power.

3 Denzel RS 1 / 6-180

The most inexpensive and smallest compressor. Quiet operation
Country:
Average price: 6100 rubles.
Rating (2019): 4.2

The Denzel РС 1 / 6-180 compressor weighing only 11 kg belongs to the cheapest, most compact and economical. Its feature is the absence of lubrication in the cylinder-piston group, and in order to reduce friction, special antifriction materials were used in the design. As a result of this solution, the oil does not get into the air, does not mix with the paint and varnish material, so the unit is very convenient to use for painting various surfaces. The output capacity is 180 l / min., And the spray gun needs the appropriate one - either HP or LVPL systems.

During operation, the compressor generates a maximum pressure of 8 bar, this indicator can be adjusted, which allows it to be used with a full range of pneumatic tools - from a wrench to an airbrush. What is important for many, it looks great and works almost silently. Of course, it is still impossible to call a universal unit, because a complete painting of a car will take a lot of time. The direct drive provided by the design (rigid connection of the electric motor shaft to the air blower crankshaft), although it is the simplest, does not have effective heat dissipation, so the compressor will have to be stopped every 10 minutes.

2 Fubag Air Master Kit

The best package. Maximum range of work. Simple maintenance
Country: Germany (made in China)
Average price: 9400 rubles.
Rating (2019): 4.5

The German company Fubag decided to offer customers not one compressor, but a whole set of the most popular pneumatic tools necessary for car maintenance and home repairs. The official website presents 2 options for kits: 6 and 10 units. The minimum package includes:

• 3 pneumatic guns with nozzles - for inflating tires, blowing or washing and for viscous liquids (with a reservoir);
• 3 tips for inflating balls, bicycle wheels and mattresses;
• flexible 5 meter hose;
• HP spray gun with a 0.5 liter top tank.

As for the compressor itself, I must say that with a rather modest size, it pleases with a capacity of 222 l / min. at the exit. It is made of high quality, ergonomics are well thought out: the pressure gauges are perfectly readable, their readings are very accurate, the craters for filling and draining the oil are conveniently located. A short power cord and incomprehensible instruction, which includes information about several models at once, spoils the impression a little, but given the price and rich set of accessories, these shortcomings can be forgiven.

1 Wester W 006-075 OLC

Best specifications for painting small parts
Country: UK (made in China)
Average price: 7800 rubles.
Rating (2019): 4.7

The power, performance and displacement of the receiver of this model are quite modest - only 0.75 kW, 126 l / min. and 6 liters, respectively. But it fully justifies expectations, and it delivers the stated 8 bar stably even with a long hose. Users use it with might and main in "garage" affairs - local painting and pumping up car wheels, blowing out tools, etc. Someone even adapted to equip a spray booth and a sandblasting service on the basis of W 006-075, however, they replaced the receiver with more voluminous. Due to its compact dimensions (ШГВ 22х48х50 cm), the compressor can easily fit even in the smallest workshop, for example, under a workbench, and does not take up extra space.

The manufacturer did not stint and provided for the presence of all the necessary safety elements in an inexpensive device: 2 pressure gauges, an oil indicator, a safety valve. There are no complaints either to ergonomics or to the build quality: the unit is painted well, the gaps are uniform, although it still does not hurt to tighten some units before the first launch, it has been working for people for several years without breakdowns. The working parts are made of cast metal, rubberized legs reduce the level of vibration (by the way, this "baby" makes a lot of noise), there is a convenient handle for transportation.

The best semi-professional compressors

Semi-professional compressor equipment in most cases is presented by European and domestic manufacturers and differs in a number of characteristics. They provide capacities in excess of 270 l / min. and a pressure of 8-12 atmospheres. To maintain optimal operation, the volume of the receiver is increased and is approximately 50–100 liters. The non-stop operation of such compressors should not last more than 40 minutes, but this is enough to be used for small service stations and tire shops, car services, and small industries.

3 Quattro Elementi KM 50-380

The best balance of performance and economy. Two-cylinder group
Country: Italy (made in China)
Average price: 15300 rub.
Rating (2019): 4.3

For a more or less large-scale painting of cars, a more powerful compressor is needed, and among the relatively inexpensive options we found the most productive - Quattro Elementi KM 50-380. In its marking, indicators are encrypted: 50 l is the volume of the air collector, 380 is the indicator of the input capacity in l / min. The outlet capacity will naturally be lower and will be approximately 270 l / min. - enough to create a pressure of 8 bar in 1.5 minutes. At the same time, the engine power (2.2 kW) and, accordingly, energy consumption does not differ much from the power of less efficient compressors (1.5–2 kW), since the efficiency of this model is higher due to the two-cylinder design of the piston group.

The manufacturer increased the resource of the unit by installing cast iron cylinders instead of aluminum ones. On the bottom of the receiver there is a drain valve that allows you to quickly get rid of condensate, and the receiver itself is covered with paint to prevent corrosion. The compressor weighs 40 kg and has a handle and two wheels for transporting it. As testimonials testify, it turns on infrequently, pumps up quickly, which means it will work for a long time. Of the minuses, the inconvenience of changing the oil and the insufficient length of the supply cable were indicated.

2 Aurora GALE-50

Reliability in work. Availability of 2 outputs for equipment
Country: Russia (made in China)
Average price: 15800 rub.
Rating (2019): 4.5

Initially, I wanted to call this compressor the best in terms of performance - after all, an impressive figure of 412 l / min is declared in the characteristics. But, unfortunately, at the output, it drops to 288, and this is the average value in this category. However, the majority of users are still interested in the unit, since its inherent set of characteristics (operating pressure of 8 bar, 50-liter air accumulator and notorious performance) allows it to be successfully used for painting a car in a service station. Moreover, the model is praised for its reliability - it was bought several years ago, and all this time it worked flawlessly (subject to a timely oil change).

The device is equipped with an air filter to protect the internal components from dust penetration, the welded seams of the receiver, the casting of the cylinders and the engine itself are made of very high quality. The appearance of the unit does not betray its Chinese origin in any way - the elements are fitted well, nowhere is there any backlash or siphonite. The design provides for universal outputs of the "rapid" type for simultaneous connection of 2 consumers. Contrary to advertisements, the compressor weighing 48 kg and dimensions 76.5x34x71.5 cm (SHVG) cannot be called either light or compact, but the presence of a handle and two wheels make it much easier to transport.

1 ABAC Montecarlo L25P

Advanced piston head. High working pressure
Country: Italy
Average price: 18,500 rubles.
Rating (2019): 4.9

In the 90s, Italian ABAC compressors made a splash on the Russian market - unlike the Soviet-style domestic units, they were incredibly light, compact and powerful. Today, of course, the situation has changed, but the championship still belongs to purebred “Italians” like ABAC Montecarlo L25P. It is designed to operate at varying pressures from 2 to 10 bar, which fully satisfies most compressed air needs. The device is equipped with a 50 l receiver, a 1.9 kW single-phase electric motor, two pressure gauges, large transport wheels and a handle.

The developers applied modern technologies in the design of the piston head: for better cooling, they used aluminum alloys and enlarged the cooling fins, provided the piston with graphite-teflon rings, which are characterized by a low coefficient of friction and high wear resistance. By doing this, they have achieved a significant increase in compressor life, especially in cold start conditions.

The best compressors for professional use

If you professionally paint passenger and cargo cars, you will have to forget about inexpensive direct-drive compressors. For auto-makers, high-power units with a belt drive that do not know overheating are needed. They are equipped with similar engines, but due to the difference in pulley diameters, the crankshaft turns much more slowly, therefore, the air injection part does not overheat, and the compressor group has time to be well lubricated. This allows the use of compressors of this category in a more intensive mode, but it must be borne in mind that continuous operation is still unacceptable.

4 Bezhetsk plant ASO S-416M

Stationary unit, recognized as the best product in Russia. Powerful electric motor
Country Russia
Average price: 107,000 rubles.
Rating (2019): 4.4

The S-416M compressor unit is intended for use at construction, road enterprises and motor vehicle fleets. The equipment consists of a receiver with a volume of 430 liters, an 11 kW electric motor installed on it and a 4-cylinder 2-stage compressor head capable of pumping up to 1000 l / min. air pressure 10 bar. The compression process occurs evenly throughout the entire volume of the chamber, therefore the level of noise and vibration is minimized as much as possible, and the preparation of a special foundation is not required to install the compressor.

The compressor is fully repairable, its piston group is made on the basis of auto engine elements. To increase the uptime, simple scheduled maintenance is required every 200 (TO-1) and 500-700 (TO-2) operating hours: flushing the crankcase, tightening the bolts, changing the oil and, if necessary, filters. In general, the unit is considered to be of high quality, reliable and durable, as evidenced by the diploma of the All-Russian competition "100 best goods of Russia", received in 2004.

3 ABAC 6000/270 CT 7.5

2-stage compressor block. Increased air flow and increased working pressure.
Country: Italy
Average price: 89,700 rubles.
Rating (2019): 4.5

In the line of the professional series of compressor equipment from ABAC, we have highlighted the model 6000/270 CT 7.5. It is notable for its reasonable price in relation to technical characteristics and the ability to create an air flow of 827 l / min. under a working pressure of 11 bar. The design of the piston block consists of two cylinders of different diameters, providing 2-stage air compression. This solution, in comparison with single-stage compressors, provides several advantages: economical energy consumption, high performance and effective heat dissipation, which increases the service life.

The device is suitable for professional car painting, crushing, tightening nuts, sandblasting and other semi-industrial tasks. Its reliability and durability are combined with a high level of comfort - there is a clear indication of the oil level, a regulator with a pressure gauge is installed for quick and accurate adjustment of the outlet pressure, a well-thought-out transport unit from two rear wheels and a front swivel. Operational safety is ensured by an automatic unit, the function of which is to turn off the compressor when the maximum pressure is reached and turn it on when it drops to the minimum specified.

2 Remeza SB4 / C-100.LB75

Lacme three-cylinder piston unit. Undervoltage start
Country: Republic of Belarus
Average price: 65,400 rubles.
Rating (2019): 4.8

The Belarusian plant of compressor equipment "Remeza" has been known since 1989, and during this time it managed to turn into an exporter of 25 countries of the world. His models were famous for a pleasant combination of high technical parameters and affordable cost. However, the SB4 / C-100.LB75 model has one more difference - the ability to work stably at a reduced mains voltage (from 180V). But many car services are located on the territory of small enterprises, where powerful equipment causes a voltage drop, or even are located in garage cooperatives with unstable electrical characteristics. The use of conventional compressors in such conditions is fraught with their failure.

Thanks to the design features (3-phase 5.5 kW motor, cast iron compressor block of the French company Lacme, receiver with a volume of 100 liters), the model "blows out" 10 bar with an output capacity of 616 l / min. and easily feeds any pneumatic equipment, be it a gun for painting a car, a grinder or a pneumatic hammer. High-quality assembly of the product is visible to the naked eye, the receiver is painted in the best way, and it is not afraid of dirt or corrosion.

1 FIAC AB 100-360

Minimal oil carryover. Quiet work. Availability of all spare parts
Country: Italy (produced in Belarus)
Average price: 29,990 rubles.
Rating (2019): 4.8

The AB series of single-stage oil compressors are specially designed for intensive (up to 8 hours / day) operation in small industries. The compressor group of the AB 100-360 model delivers a capacity of 252 l / min., Is complemented by a 100-liter receiver and consists of two honed cylinders, as a result of which the oil is better retained on the walls and is less consumed. A specially developed Fast Valve design has also been introduced, which provides a minimum operating noise (74dB) and is considered more reliable than conventional valves.

The Italian manufacturer FIAC has long been known in Russia and has a wide network of specialized service centers. They work closely with Italian engineers, maintain warehouses with a full range of spare parts and quickly solve various technical problems. This is confirmed by the reviews - no one complains about the shortage or long delivery of consumables and parts. In general, the compressor is characterized as a high-performance, safe and durable machine, however, to maximize the resource extension, it is worth adhering to the recommended operating mode - 5 minutes and 5 minutes of rest.

Industrial production

The BAMBI Silent Compressor is an independent, fully self-contained air center, created by BAMBI engineers using the most advanced technologies.

BAMBI offers a wide range of silent compressors to suit your special task as well as any standard application where clean compressed air, comfort, high reliability and efficiency are required.

Laboratories

BAMBI compressors are in particular demand in critical applications. This application is found in research laboratories with unique equipment. To this end, BAMBI not only produces reliable systems, but also provides a high-quality service, as well as meeting the specific requirements of each specific application.

Medicine and Dentistry

Perfectly clean air, complete absence of oil pollution, low noise level - these are the standard requirements for modern medical equipment.

Over the years, BAMBI has been developing to promote compressors in this sector, and BAMBI systems fully meet the requirements of modern surgery.

BAMBI compressors provide hygienically clean air and can be easily connected to any medical equipment.

Silent Oil Compressors

The BB and MD series are designed for users looking for compressors with extremely low noise levels, maximum efficiency and long trouble-free operation.

Although both series compressors have an oil-powered power module, the MD series has unique piston rings designed to keep oil out of the compressed air, making it the only silent compressor of its kind on the market for medical, dental and laboratory applications.

Compressors of these series are standardly equipped with a receiver with an inner lining, a silent check valve, an outlet filter 10 µm, a pressure regulator, and many other devices.

BB series

These compressors are the most inexpensive of all BAMBI compressors. They have the same pump unit and different receivers; pump units can be used for greater performance. The features of this series include an extremely low noise level, like a modern refrigerator. The pumps of these compressors are housed in a metal casing, the crankcase of which is filled with a special oil. The engine and pump itself are suspended by springs inside the casing, drawing oil through the combined crankshaft and engine shaft. Thus, all parts of the compressor are lubricated, additionally oil is sprayed into the casing space, lubricating the cylinder and piston through the air intake.

The compressor piston has no oil scraper rings to increase reliability and simplify the design. Due to these features, BB compressors pass oil into the compressed air, consuming it from the crankcase. The oil level must be monitored, especially if the compressor has been running for a long time. The fact is that the oil consumption increases greatly with the temperature of the pump; the oil level can be monitored through a special transparent window. Compressors in this series are not recommended for full-time use, much less 24/7. They are suitable for you if you use a compressor for power supply, for example, a pneumatic dispenser or for infrequent use.

The BB Series is not suitable for applications requiring oil and condensate free air. If the compressor gets noticeably hot, oil particles enter the compressed air and fill the room with a characteristic odor.

MD series

This is a series of small compressors similar to BB compressors, but with a significant advantage - they do not let oil into the air. That is, with low noise and vibration levels and a durable design, they do not require regular oil topping. The pumps let so little oil into the air that such compressors can be used in dental clinics, the patient will not smell the oil.

HT series

The compressors in this series are oil-free compressors with a low noise level compared to conventional comparable compressors. The noise in its spectrum is not at all similar to the noise from the refrigerator, it is more like the noise from an ordinary compressor, only noticeably quieter. These compressors do not release oil into the air and do not require any maintenance, except for draining the condensate from the receiver. for this you have to pay a shorter service life. These compressors are not recommended for all day operation as they do not have forced cooling of the pump. A version with double the crankshaft speed is available for higher performance (-2P), for which again you will have to pay for the service life and the level of noise.

VT and VTS series

This series belongs to the class of efficient industrial reciprocating compressors. Compressors of this series can work around the clock, thanks to the forced cooling fan. All compressor components are extremely reliable. The compressor pump is oil-free, so the compressor requires a minimum of maintenance, in particular condensate drainage. All models can be equipped with a condenser air dryer for absolutely dry air outlet. Thus, compressed air is obtained, absolutely free from oil and moisture. VTS models have a sound-absorbing casing, which slightly reduces the noise level from powerful pumps.

When it becomes necessary to purchase a compressor, as a rule, it is selected taking into account such parameters as: inlet capacity, outlet capacity, pressure, receiver volume, etc. But not infrequently there are cases when such an indicator as noise level.

There is a whole group of compressed air consumers for whom this indicator is of decisive importance when choosing compressor equipment. These include hospitals, dental offices, chemical laboratories, research institutes, manufacturers of electronic boards (microcircuits), workshops for the production of photo books.

For them, the noise level is of decisive importance, since the compressor equipment is located indoors in the immediate vicinity of the place of work of people and is designed to work for a long period of time. When using, for example, a classic reciprocating compressor, whose noise level can vary from 80 to 100 decibels (dB), you can get a real headache during its long-term operation in a confined space. This is especially problematic for non-industrial premises. Because 100 dB. comparable to the operation of a motorcycle engine or the operation of a powerful rock drill on a construction site.

In the beginning, of course, you can adapt, leave the room while the compressor is running, or put on sound protection, especially since at a noise level of 120 dB or more. this is already directly regulated by labor safety. However, the high noise level brings constant inconvenience, including for those around you. This raises the need for compressors that have low noise levels or, ideally, are silent. But noiselessness is also a relative concept, because a person practically ceases to hear if the noise scale drops below 10-15 dB. Here again, everything is individual. Below is a figure that allows you to roughly correlate the number of decibels and the level of noise.

With regard to compressor equipment, it must be understood that, depending on its type, it has a different noise level. So one of the loudest compressors are belt driven piston compressors, where the noise level can exceed 100 dB. Direct drive piston compressors have a lower noise level, and it ranges from 80 to 90 dB. Oil-free compressors have the lowest noise level of traditional compressors, which, due to their design features, produce less noise, it can fluctuate around 70 dB. If we consider the entire range of compressor equipment, then we can also note screw or scroll compressors, in which the noise level is quite low. But screw compressors, belong to the class of industrial equipment, have high performance (from 500 lit./min.) And hence the price. Scroll compressors generally have a distinct specialization in the medical and food industries.

What if there is no need to overpay for a high performance compressor on an industrial scale? The fact is that the leading manufacturers of compressor equipment have long recognized the need for low-noise compressors and are currently producing individual models or even entire series of compressors with low noise levels. Such compressors have in their name the words: "low noise", "quiet", "silent", etc. all of them, in fact, are aimed at one thing - to emit a low noise level during operation, comfortable for a person's work. And here manufacturers take different paths: some of them create special soundproof casings for compressors, which cover the piston unit, and often the compressor engine, and thereby reduce its noise. Such technologies are typical when low noise compressors are created on the basis of oil compressors. As an example, we can cite a whole series of low-noise compressors, which have a solid soundproof casing, due to which the noise level is quite effectively reduced.

Another way is the creation of fundamentally new designs of the piston unit, which, on the one hand, will allow maintaining sufficient performance for operation, but at the same time will reduce the noise level during the operation of the compressor. This is more typical for oil-free models. And here, as an example, we can cite from the company "Remeza", on the compressors of which the original piston blocks "Twin-cilinder" are installed.

They allow the compressor to reduce the noise level by up to 65 dB. Such compressors can already be classified as low-noise. Direct analogue of the series « OLD "from"Remez_ы " is a compressor ТМ QuattroElementi (Ergus)

At the same time, there are manufacturers specializing in the production of silent oil compressors. These include the English manufacturer « BAMBI ", he produces truly unique models with different noise levels in 40 dB., which is perceived by the human ear as the work of a modern refrigerator. from « BAMBI " is "the quietest" in the entire line of the English manufacturer.

An American company is also working in the same direction. "Jun-Air", the noise level of which in the most "advanced" models with respect to noise also ranges from 35 to 40 dB.

These compressors have really low noise levels, but such a pleasure, as they say, has to pay, as these compressors are more expensive than their noisy cousins. However, here everyone chooses for himself: pay extra for comfort or work with a constant headache. Therefore, whatever choice is made, the most important thing is that it is always there.

Modern industrial enterprises, regardless of the profile of their products, use compressed air energy among other types of energy in many production processes.

A similar type of energy is used in pneumatic drives of modern machines, and when unloading bulk materials, and in the production of PET containers.

Air compressors are the main source of this type of energy generation.

Modern air compressor- This is a complex technological equipment, which, thanks to various technologies of air compression, has its own classification: centrifugal, screw and reciprocating air compressors.

Main parameters of compressor equipment

When choosing an air compressor, the consumer, depending on the purpose of operating the equipment, always pays attention to main parameters of air compressor- this is the engine power (hence the energy consumption, and therefore the cost of generating compressed air), pressure (from low pressure, for example, to maintain combustion in furnaces, or unload cement to high pressure required for pressure testing of pipelines or test benches), and and finally, productivity, that is, the amount of compressed air of the required pressure per unit of time.

But often, consumers do not pay attention to another important parameter - the noise produced by compressor equipment during work. And in vain. After all, many modern industries, having high requirements for the standards of production processes, strive to improve the comfort in the workplace. In such cases, many factors are taken into account - air purity, illumination, temperature, and, among other things, the sound background.

Compressor equipment with low noise level

Realizing the importance of such a parameter of air compressors as reproducible noise during operation, DALGAKIRAN is constantly striving to reduce the noise threshold of its equipment, thanks to the design of the equipment, as well as the use of the most modern soundproofing materials.

In addition, in support of the objectivity of the accompanying technical data, DALGAKIRAN has included a reproducible noise test in the compulsory compressor testing program.

Thus, each unit of the company's products is guaranteed to meet the declared noise characteristics.

Silent Air Compressors

In any production, be it medicine or industry, an air compressor is needed. Thanks to this equipment, a clean air stream is created that does not contain foreign components and harmful substances. All this allows us to maintain comfortable working conditions, as well as safety for the health of employees and visitors. In our store you can buy silent air compressor at a bargain price.

What are Silent Air Compressors

Such designs are versatile devices that are capable of silently clear the air in room. The devices are delivered in a compact structure. The case, made of stainless steel, is lightweight. Therefore, the transportation and delivery of such technical equipment does not cause problems.

No noise and high performance

The main “plus” is the complete absence of any sounds when the compressor is running. These units are based on an electric motor, which allows the compressor to be used in rooms of any size.

Modern silent air compressor models, such as those presented on our website, have increased performance, which allows you to use them non-stop for several days. The device itself is a design with a long wear life, thanks to the presence of an internal cooling system, which eliminates the load on the motor.

Ease of control is another indisputable plus of air compressors.

And, of course, high efficiency and reliability of the equipment: each compressor is equipped with a special filter that cleans the air from germs and bacteria, unnecessary odors and components. As a result of the compressor operation, a clean cooled air flow is obtained, which is absolutely safe for humans and the environment.

Oil-free and oil-free models

In general, all compressors can be divided into two types: oil and oil-free.

Oil models are usually as quiet as possible and subject to less wear and tear. They are used in cases where it is necessary to create the most comfortable working conditions. But they have their limitations. Oil, albeit in minimal doses, but penetrates into the compressed air, which does not fully guarantee the cleanest possible air at the outlet. Of course, such a small amount of oil is absolutely harmless for industrial use, but it is not recommended for the medical field of activity, work with optical devices and in research laboratories. Oil-free models solve this problem.

Varieties of compressors by area of ​​use

Compressors for industrial production will be an excellent choice for solving production problems with minimal operating costs.

The most reliable and efficient models will find their application in laboratories and research centers.

Compressors for dentistry and medicine characterized by the ability to generate perfectly clean air, without oil contamination and with an extremely low noise level.

Buy Silent Air Compressor

In our online store you can buy a suitable model of high quality equipment at a bargain price.