Ferroli gas heating boiler device. Varieties and correction of malfunctions of Ferroli boilers

When people make bathroom renovations, they try to change all the accessories.

Such actions help to achieve comfort for every day.

Such items include washbasins.

The market is now overflowing with sinks of various types and designs.

But a washbasin should not only be pleasing to the eye, but also convenient, practical and properly installed. In the current article, we will look at how to install a tulip sink yourself.

Tulip washbasin concept

Tulip - a shell on a pedestal

Recently, quite common washbasins in the form of a flower.

The tulip sink, in addition to the usual bowl, has a stand.

That is, the bowl is on a leg.

That is why it has such a name.

Its general appearance resembles a flower.

The stand is made of the same material as the bowl.

These are usually ceramics. Usually the products are made in one piece.

In some varieties, it is required to connect the sink and stand to each other independently. The tulip washbasin has an elegant appearance, therefore it is quite popular.

This design is very durable and can last up to 20 years. Ceramics are not afraid of moisture. This type of sink well hides all plumbing communications.

For example, a siphon or pipes. Therefore, the bathroom acquires an aesthetic appearance with the presence of such an accessory. The washbasin is no more than 85 centimeters high.

It will not take up much space and will help save space. This type of sink has practically no drawbacks, except that it requires a little more space than a regular sink.

How to choose the right sink

How to install a tulip sink with your own hands? Before proceeding with the installation, you should make the right choice of the accessory.

Sanitary ware in ultramarine color

It will largely depend on the square of the room, as well as the number of pipes and hoses. You should pay special attention to the following points:

It is better to choose a sink equipped with an overflow system. It will help you avoid problems with neighbors in an unforeseen situation.
When all communications are supposed to be repaired in the restroom, any sink option will do. But, if the replacement of pipes is not expected, you will have to measure the distance between the floor and the pipe. This will help determine the height of the required counter under the sink.
It is also important to guess with the width of the pedestal. He must hide all pipes from view. Therefore, you should also measure the width of the pipes under the washbasin.
Together with the sink, you need to choose a siphon, since usually it is not included in the kit. It is better to pick it up immediately on the spot, when buying a washbasin.

Now the market is overflowing with a huge number of washbasin models. It will not be difficult to find something for your bathroom.

It is important that the washbasin blends harmoniously with the interior and overall space of the room. Ideally, it should hide all pipes from a person's field of view.

Installation procedure

Some craftsmen are wondering how to install a tulip sink in the bathroom. This procedure does not require special knowledge and skills.

Installing the washbasin

The main thing here is to adhere to a certain scheme of actions:

The first thing to do is prepare the instrument. Here you will need: a screwdriver, a wrench, a hammer, a drill, a level, dowels and expansion plugs.
Next, you need to find a place to fix the bolts. For this, the accessory is applied to the surface and marks are made through the holes. Only after determining the exact location can you take up the drill.
A siphon must be attached to the drain of the tulip bowl in advance.
The sink is attached to the wall, the bolts should not be tightened immediately, it is enough just to bait. A pedestal or leg is required to be attached to the center of the bowl. The main thing here is not to forget about the withdrawal of the corrugated drain hose into the sewer. In simple words, a drain is made.
After everything has been summed up, you should proceed to fixing the accessory. For this, the bolts must be tightened.
It is better to immediately spread the joints between the washbasin and the wall with a special transparent sealant. This will help prevent water and moisture from entering there. That will prevent the formation of fungus in the future.
And the last step is to install the mixer. This is usually not difficult at all.

After completing the installation, immediately check the accessory for leaks. To do this, you can plug the drain with a stopper and draw in water. A properly installed washbasin will add comfort and coziness to the bathroom.

The video shows the installation of a sink with a pedestal:

Select it and press Ctrl + Enter to tell us.

Source: http://FoxRemont.com/engineering/water/sanitary/kak-ustanovit-rakovinu-tyulpan.html

How to install a tulip. Replacing the washbasin, installing a tulip with your own hands

As a rule, a "tulip" sink is monolithic or consists of separate components - a bowl and a stand. Despite the presence of pedes

thal, often such a sink is attached to the wall using brackets or dowels. The sink can also rest on a pedestal, but in this case it is fixed firmly to the wall.

How to install a tulip

If the drain fittings are not included in the kit, then it is worth purchasing the sink at the same time as the siphon, so that the structure would

are compatible. It is also advisable to buy a mixer simultaneously with the purchase of a sink. Almost all imports

modern, and now many domestic sinks have overflow protection ("overflow" system). Water

through a hole in the upper part of the bowl, through a special channel inside the ceramic, it flows into a siphon. You need to know that standard domestic siphons are not suitable for such sinks. There is nowhere to drain the water coming from the overflow system. Therefore, it will be necessary to purchase a special siphon in the kit suitable for such a system.

In the post-Soviet space, tulip sinks have become very popular for their pleasant appearance and ease of use.

Tulip shells are nowadays installed everywhere, both in small apartments and in huge Premium class cottages, and this is due to the obvious advantages of the “tulip” - strength, variety of assortment, durability and convenience.

But before moving on to the features of the "tulip" installation, it is worth considering in more detail what such a sink is, and what are its advantages. The first thing you should pay attention to is the leg, which plays the role of a pedestal, and which takes on part of the load that falls on the sink.

It is due to this leg that this type of product got its name, for its resemblance to a flower with a thin and long stem.Installation of a tulip sink begins with the fact that water supply and sewage pipes are brought to the place of its placement.

The bowl of the product is installed on a pedestal, after which the places for placing the brackets or the places for placing the holes for the bolts in the wall are marked. Yes, do not be surprised, the installation of the tulip shell is done not only on one leg, but also on a bracket, or a hidden fastening inside the tulip itself. This is due to the fact that the leg will not be able to provide the necessary stability of the bowl and the entire structure may collapse under high load, or fall in one direction.

After placing and fixing the bowl, the installation of the tulip sink continues by connecting the bowl to a siphon, which connects it to the sewer, and then connecting the mixer to the water pipes using a flexible hose.

It is worth making an important reservation in this place: many violate the sequence and first connect the water supply, and then the siphon.

But in the event that some gasket or the mixer turns out to be faulty, flooding, albeit small, is inevitable, while the preliminary connection of the siphon and the sewage system will avoid excess moisture on the floor of the room. Connecting a tulip sink ends with placing a leg under a bowl, which will hide unaesthetic communications.

It is recommended to apply a layer of transparent silicone sealant at the junction of the bowl and the pedestal to increase the service life of the sanitary ware. Well, and, of course, it is not recommended to install and connect it yourself, but it is worth inviting a professional plumber. The cost of work is only 1500 rubles.

Plumbing work

The most common type of washbasin in modern bathrooms is the pedestal washbasin or the so-called tulip washbasin. This floor-standing washbasin perfectly matches both classic and ultra-modern interiors. In addition, among its advantages are functionality, practicality and durability.

As a rule, a "tulip" sink is monolithic or consists of separate components - a bowl and a stand. Despite the presence of a pedestal, such a sink is often attached to the wall using brackets or dowels. The sink can also rest on a pedestal, but in this case it is fixed firmly to the wall.

Sinks - "tulips", like other types of sinks, come with a hole for installing a mixer and deaf. For standard "Soviet" bathrooms, where the piping provides for the installation of one mixer for the shower and the sink, the option without a hole is more suitable.

If the drain fittings are not included in the kit, then it is worth purchasing the sink at the same time as the siphon so that the designs are compatible. It is also advisable to buy a mixer simultaneously with the purchase of a sink.

Almost all imported, and now many domestic sinks have overflow protection (overflow system). Water flows through a hole in the upper part of the bowl through a special channel inside the ceramic into a siphon. You need to know that standard domestic siphons are not suitable for such sinks.

There is nowhere to drain the water coming from the overflow system. Therefore, it will be necessary to purchase a special siphon in the kit suitable for such a system.

Sinks-"tulips", in addition to a winning design, are distinguished by the ability to hide all communications in the base-stand. A neatly and securely installed "tulip" does not spoil the interior of the bathroom with protruding pipes, taps and valves.

Replacing the washbasin, installing a tulip with your own hands

When installing a tulip for the first time, you will need a guide from which you will build on when doing this job.
So, let's begin! What do you need for this?

First, the tulip itself, the leg and sink of the washbasin.

Secondly, you need a little white and Ceresit, you can use colored Ceresit to match the color of a tulip.

Thirdly, you will need an electric drill or a hand drill, but you may have problems with it, as well as two dowels and a suitable drill for them.
Fourth, don't forget to get your sink drain. When buying a tulip, a drain is NOT included in the kit.

When choosing the color of the sink, match the tulip to the tone of washable wallpaper or tiles, for harmony. You should purchase everything you need and check the package contents, preferably in one store, so that one seller advises you. You should also save the receipt after the purchase, as well as after each significant purchase.

Now everything is purchased and delivered to your apartment or house. After that, you should dismantle the old tulip or sink.

As a rule, first disconnect the drain by directly shutting off the hot and cold water supply taps. If the sink was bolted to the wall with bolts, then unscrew them with a wrench, usually by 13. Next, we loosen the tulip leg with our hands.

After the tulip and shell have been removed, the site should be prepared for the new tulip. Cement or Ceresit must be removed from the floor with a spatula.

Next, we prepare the wall in order to attach a new sink, if the height and distance between the tie bolts match, it does not cost anything to change, if they differ, then we prepare according to the new specification.

That is, we drill holes, while removing the old ones, change the height (level), outline new places for the dowels. In order to remove the old holes, they should be covered with Ceresit, which dries quickly, which will allow you to continue working on the sink soon.

Of course, it takes 24 hours to completely dry, which should be taken into account during installation. Then we install the tulip leg and try on the sink, while the holes in the wall and on the sink must match, in this case it is better to check it again before you drill.

If everything coincides, then you should begin to assemble the siphon for the washbasin and attach it with the appropriate plastic washers, not forgetting to put insulating rubber washers. We tighten them with our hands so as not to overtighten. Now we fix the sink to the wall with tie bolts.

Two bolts must be screwed in in order to put the leg. When installing the leg, you should raise the sink, for this we did not tighten the bolts, passing the corrugated hose of the siphon inside the leg and bringing it out at the bottom through a special hole.

After you have installed the leg, insert the drain hose through the O-ring into the drain pipe.

Should fit tightly. If it does not fit, then use a screwdriver or a technical knife.

Having installed the leg, you should fix the sink with tie bolts, having previously prepared the cement mortar or Ceresit mortar, then you should walk along the contour of the leg with the mortar.

If there are tiles on the floor, you can use a special adhesive designed for such surfaces. The washbasin can be used immediately after installation, but the leg must dry.

Back in the days of perestroika in our country, the tulip shell was considered a great "chic". And everyone, paying tribute to fashion, thought only about how to install a tulip shell at home. However, even today, when the demand for it has dropped a little, the installation of such a sink gives a good and inexpensive opportunity to give our bathroom a charming look.

After all, the popularity of the tulip is associated with a practical design, which consists of a compact ceramic pedestal and the sink itself, which resembles the appearance of a flower that closes the plumbing system and allows you to give the bathroom an aesthetic look.

Since the release of the first model, a wide variety of design implementations of the product have been produced, such as: round built-in washbasins, oval, overhead corner washbasins, square washbasins, etc., which can satisfy various tastes and requirements of customers.

Therefore, very often even today, many people have a question: "how is the tulip shell installed?" The answer to this question is "yes, very simple." And for this it is not at all necessary to invite plumbers, but you can simply do with the services of a home assistant. Before buying, you need to make the right measurements.

The most important thing is to measure the distance between the water inlet valves and the floor. When you have made sure that all the dimensions are the same, place the sink against the wall and mark the places for fixing it on it. Now, use a drill to punch holes in the places marked on the wall and drive the dowels into them. After that, you can fix it with a foot and attach a mixer with a siphon.

Today, many designers have developed various modifications of modern, stylish bathroom furniture: cabinets, tables, bedside tables, bookcases, etc. You cannot place a regular, simple tulip sink in such furniture, since this requires a sink built into the countertop, for example, a round recessed washbasin or a square recessed washbasin.

But don't be discouraged - all these products are installed according to the same principle. Now, knowing how to install a tulip, you yourself will answer this question, which is easy.

Your thoughts on "which sink to install?" depend on your taste and desire to create the interior that will bring into your bathroom not only a comfortable and cozy atmosphere, but also a modern, stylish atmosphere.

You can buy any sink in the online store, where a very wide, varied assortment of various modifications and designs is presented. Including: the popular countertop washbasin, recessed round, oval, rectangular and more. dr.

How to install a tulip sink

Despite all the variety of models on the modern market of sanitary equipment, the tulip sink has enjoyed well-deserved popularity for many years and the demand for this model is only growing.

This type of sink is a sink with a pedestal-leg. A siphon and all unaesthetic water communications are hidden in the leg of the "tulip". This sink will make your bathroom more compact and sleek.

You will need

pencil, drill, dowels, bolts, mixer,
siphon for drainage

Instructions

1 Select a sink. When choosing a new washbasin, it is necessary to consider not only its color and design. To be fully prepared, you need to make some measurements before going to the store. First, you should measure the width of the wall where the sink is supposed to be installed. It is also necessary to take into account the distance to the water supply valves and the sewer inlet, the diameter of the pipes and the height of the proposed installation.

2 Remove the old sink. Remember to shut off the hot and cold water before starting the dismantling. Disconnect the siphon, unscrew the hoses, remove the mixer, and then the sink itself.

3 Place the sink body on the base without securing it.

4 Slide the new sink against the wall and mark the attachment points with a pencil.

5 Drill the holes and insert the correct size anchor plugs.

6 Assemble the siphon and place it on the sink. Installation of a tulip sink involves assembling and installing a siphon before attaching the sink to the wall.

7 Attach the mixer to the sink. Connect the flexible line to the installation valves. Move the communications into the base of the sink.

8 Fix the sink to the base with two screws using a sleeve.

9 Screw the sink to the wall through the holes in the attachment points and tighten with nuts and washers.

10 Connect the mixer to the pipes. Connect the siphon to the drain. Check the connection carefully. If the connection is not made neatly enough, then after a fairly short time, an unpleasant odor may appear in the bathroom.

11 Fill the joint between the wall and the sink with silicone sealant.

Source: http://goodlinez.ru/sanitary_works/472

Installing a tulip sink

In the article How to choose a bathroom sink, we have already talked about the popular model of sinks, called "tulip" because of the similarity with this beautiful flower, which gives it a long pedestal, reminiscent of a tulip stalk.

The design of the sink not only looks very aesthetically pleasing in any bathroom interior, but is also very practical. Thanks to its "leg", the shell is securely fixed and even if you lean on it, it will not fall, since the force will be transmitted to the support and then to the floor.

In addition, in the pedestal (this is how it is correct to call the leg of a tulip sink), you can place flexible hot and cold water connections, as well as a corrugation or a siphon for draining waste water from the sink into the sewer system.

Installing a tulip sink is not particularly difficult and you can easily perform all the necessary operations yourself if you use the tips given in this article.

Different designs of tulip sinks - which one to choose?

Despite the external similarity, sinks of this type still have some differences in their design, which you should be aware of before buying.

The cheapest models have one hole for water drainage and one hole for installing a tap.

This design is the simplest and most convenient for installation and operation.
But, if you plan to decorate the bathroom interior in a style that uses retro elements, then you may need a sink, where, in addition to the tap hole, there will also be two holes for hot and cold water taps. Pay attention to this.

You should also think in advance - do you need an overflow? On the one hand, it is quite convenient if you wash something in the sink by drawing water into it, plugging the outlet. This will avoid a flood in the bathroom.

But if you don't plan on regularly filling the sink, then you can do without overflow.

Moreover, its presence only complicates the system of branch pipelines, and also creates additional inconveniences when cleaning with a plunger in the event of a blockage, when it is necessary to tightly plug the overflow hole.

You also need to decide on the height of the sink, the color and design of the decoration. If you have decided on the design and have already bought the model you need, then you can proceed directly to the installation.

Let's see how the tulip sink installation is performed step by step with a photo.

Required tool

For installation, you will need the following tool:

roulette;
screwdriver;
electric drill;
adjustable wrench;
open-end wrenches;
pliers;
center punch;
drill for concrete;
drill for tiles (if there is tiles on the wall);
hammer;
level;
silicone sealant.

Installation of a sink with a pedestal (tulip)

Installation begins by marking the places where the sink is attached to the wall by placing the sink on its feet and marking the holes. But before that, you need to completely assemble all the fittings attached to the sink in order to do the fitting taking into account the entire "body kit".

Attach a faucet, flexible hoses, siphon outlets or corrugation to the sink. This will allow you to determine whether it will be convenient enough to connect to the connection points of the existing water supply and sewerage networks.

The outlet is attached through the gasket using a screwdriver, tightening the screw on the stainless steel divider grate, which serves to catch large debris. After that, the tap, outlet fittings and connections are screwed to the sink. The leg (pedestal) of the sink is placed against the wall where the sink will be located ...

A sink is installed on the leg with fittings screwed to it. During the fitting process, it is advisable to check the horizontal installation of the back wall of the sink using a hydraulic level.

After that, we check whether all the connections and the outlet can freely reach the connection points. If necessary, you should immediately make adjustments - move the sink or use the liner / outlet of a different length.

After that, using a soft pencil, mark on the wall the location of the mounting holes in the ceramic shell of the sink from the side of the rear wall. In these places, you will need to drill the wall, insert dowels into the holes made and screw in the studs that will fix the sink to the wall.

When the installation sites are outlined, the drilling site is marked on the wall with the help of a core drill with a light blow of a hammer.

If the core is not at hand, you can use a carbide tipped drill.

If there are tiles on the wall, be very careful not to split them. In this case, you can use the tips from the article How to drill a tile and stick thick tape at the drilling points, which prevents the drill from sliding at the beginning of drilling.

After that, you need to drill holes to the desired depth. If the wall is papered with tiles, you must first go through the tiles with a special feather drill, and then continue drilling by rearranging the carbide-tipped drill and turning the drill into percussion mode.

When the holes are ready, dowels are inserted into them.

After that, using an adjustable or open-end wrench of a suitable size, you need to tighten the pins:

That's it, threaded metal studs are screwed into the wall and you can screw the sink to them.

The leg is placed on the floor in the place of installation, and the sink is installed on the leg, putting it on the metal studs sticking out of the wall.

The sink is fixed to the studs with nuts through elastic gaskets. Tighten the nuts very carefully so that the faience does not burst at the attachment point from excessive force. As soon as the nut starts to go with effort, you should stop tightening.

In addition, when tightening the nuts, you need to tighten them in turn - a little the first, then the second, then again a little the first, then again a little second, and so on. The same method of tightening the nuts is used when installing the toilet - it is fastened to the floor in the same way by alternately tightening the nuts.

This makes it possible to more evenly distribute the emerging forces in the body of a fragile plumbing fixture and prevent cracks from appearing.

Special caps are put on the nuts to prevent debris from entering and to prevent metal corrosion. A little grease can be smeared under the caps. In this place, no one will see it, and if necessary, remove the sink, the nuts can be easily unscrewed even after a year, as if you tightened them yesterday.

After fixing the sink to the wall, you can start attaching the flexible piping and outlet fittings to the existing water supply and sewerage networks.

The connection to the cold and hot water supply is carried out through a ball valve (or valve) for the possibility of promptly shutting off the water if necessary.

It is very convenient to use corner taps, which are mounted on the wall at the pipe outlet and look very aesthetically pleasing.

The last step in installing the sink is filling the cracks with silicone sealant. The popular Sanitary sealant, which is available both in the form of a transparent filler and in white, is quite suitable.

The gaps between the back edge of the sink and the wall are sealed with a sealant, as well as along the perimeter of the pedestal where the sink's "leg" is installed on the bathroom floor. Below you can watch a video of the installation of the tulip sink (click on the triangle to play it): does not represent a sink and you can always do it yourself.

Self-installation of the sink and tulip methods of attaching to the wall of the sink

It is not difficult to install a sink in the bathroom, even plumbers take a little for this work - the work is simple. But at the same time, this is a responsible matter - because how you managed to install a sink in the bathroom directly depends not only on the appearance of the room and the ease of use of the plumbing fixture, but also on the sanitary and hygienic situation in your entire apartment.

If you recall, then quite recently in our country the problem of choosing a sink suitable for your apartment did not exist. Products of the same type were found in almost every bathroom. Nowadays, the variety of these products allows you to create an interior that fully meets your taste, but at the same time, a wide choice poses many questions for the owner of the home.

Types and methods of installation

The installation method of this plumbing fixture directly depends on its type. The most common are:

Hanging or console washbasin - mounted to the wall with brackets. The shape and dimensions of the device can vary greatly, it is easy to install. But there is a significant drawback - communications remain in plain sight;
Built-in washbasin - installed in the countertop. The design hides all unsightly communications and makes it possible to use furniture with a built-in sink for storing small items. True, this design takes up a lot of space;
"Tulip" (with a pedestal) - is distinguished by a special pedestal on which a bowl is installed, which is attractive in appearance and allows you to hide communications, which led to the popularity of this model;
A sink in a bathroom with a semi-pedestal - for such products, the pedestal is attached to the wall, it requires a sewer pipe to be supplied at a certain height.

Things to consider when buying a washbasin

Going for a sink, you need to know exactly what type of sink you need. In addition, you need to know the permissible dimensions of the device and what is the required installation height of the washbasin, for which measurements are taken of the place in the bathroom where it will stand.

Almost any bowl shape is suitable, the optimal length should be at least 55 cm, otherwise, during use, water will spray around the room. These products are produced with holes for the mixer and blind, for this reason, the method of installing the mixer and the appropriate size of the washbasin for the bathroom must be calculated in advance.

It is better to purchase it at the same time as the sink in order to immediately test their compatibility. In addition, do not forget about the correspondence of the fixing elements of the appliance and the plumbing system.

Installation work

Before fixing the washbasin to the wall, you need to determine if it can support the additional weight. If in doubt, it is better to use a supporting frame for mounting the device. For convenience, we immediately mount the crane, instructions for installing the mixer.

The work of installing a sink consists of several stages:

washbasin fasteners

We choose the place where the device will be installed.
We draw a horizontal line corresponding to the upper part of the sink, be sure to use a building level, check its horizontalness.
Places for fasteners are marked as follows - the washbasin is aligned with the upper edge and then the attachment points are marked with a marker. It must be remembered that the height of the washbasin must be such that it is convenient to use it.
We again check if the height of the washbasin is right for you, if it is necessary to change something, it is better to do this at this stage of the work. Holes are made in the places where the fasteners will be located with a perforator. They should be slightly smaller than the dowels used. We introduce glue into the drilled holes, for a stronger connection, and dowels are hammered into them.
Now you need to install the bowl, for this we screw the plumbing self-tapping screws into the holes prepared in advance. We check the reliability of the fastening and install the sink on them. After that, we put on spacer washers on the self-tapping screws, and screw them in slowly. It is not necessary to exert considerable effort, otherwise the bowl may burst.
We close the fasteners with decorative plugs.

After that, we can assume that the installation of the sink is over. Now you need to turn on the water and check if the installation was done correctly. If somewhere, water is leaking, then most likely you just need to tighten the connections, having previously coated it with a sealant.

There should be no gaps between the hay and the sink. The gap could cause water to spill onto the floor and ruin the finish. If, nevertheless, there is a gap, then the joint must be sealed with silicone sealant.

In most cases, the installation of the sink is not difficult. If you do all the work correctly and accurately, without neglecting what is said in the instructions, the result will certainly be positive.

Fixing the sink correctly and in a suitable place will prolong its service life.

Types of sink siphons

The S-shaped corrugated hose is the simplest siphon, in theory it is enough for a simple washbasin, it does not get food residues, hygiene items or toilet paper.

But there is one caveat - during cleaning with a plunger, the corrugation moves strongly and after a short time breaks, it is generally impossible to clean it with a cable.

For this reason, if you have to often clean the sewer in the apartment, you must use a hard siphon, in which a hole with a lid is provided for checking and cleaning it, and for a sink installed in a bathroom or kitchen, it is mandatory.

There are two types of rigid siphons:

siphon bottle;
The pinnacle of the evolution of these products and also of tulip washbasins is the chrome-plated decorative siphon with an opening for the revision. Moreover, such a device is very functional and completely hygienic. But such a siphon is much more expensive than usual.

Installing the washbasin

Do-it-yourself installation of the washbasin in the bathroom is done by attaching it to the wall with dowels on special brackets.

You need to know that to install a tulip sink on a pedestal even from the floor to the bottom of the sink - you shouldn't consider it as a supporting element of the appliance! Self-tapping screws still need to be buried at least 70 mm into the wall surface, for this reason, self-tapping screws with a length of 100 mm or more should be used if the wall is tiled on a layer of plaster, and longer fasteners for thicker coatings. Propylene dowels should be used, metal anchor bolts are well suited. PVC fasteners crack when humidity and temperature change, metal rusts, and polyethylene fasteners have low strength.

The spacious bathrooms use a washbasin with a vanity unit. A lot of space for such a structure is necessary because dirt collects inside the cabinet and under it. And the volume of a seemingly large dressing table is not too large - the main part of the space is occupied by pipes and a siphon

: Bathroom sink do-it-yourself installation. Education

Sealing

Nowadays, all plumbing fixtures are sold with ready-made gaskets. When installing them, you must follow a few simple rules:

Seal only dry joints. You can dry them if necessary before using a household hairdryer.
It is not advisable to grasp the areas where the gasket will stand with your hands. Captured areas - degrease by washing in water with a dishwashing detergent.
Paronite gaskets - hard, yellow, gray or red, are installed between the metal pipe and the plastic elements.
Plastic pipes are made with a margin, they must be cut exactly to size, in the absence of experience in such work - do this only with a special pipe cutter. Even a minimal skew will cause a joint leak.
Before installation, rubber gaskets are treated with silicone sealant. The latter requires clarification. Separately, the silicone and rubber gasket can last 3-5 years, and if they are installed together, they serve an unusually long time. The reason is the difference in thermal expansion of these materials.

If you install the sink correctly, taking these points into account, then the reliability of the connections is guaranteed.

: Washbasin sealing options

Sink mounting height

At what height the washbasin will be installed is not regulated by any documents, it is customary to install it 80-85 cm from the floor. Do as it is more convenient for you - in a short family, you can place it a little lower than generally accepted norms, and for tall people, you can raise it. True, if you need to install a sink with a pedestal, then during installation, it will be necessary to focus on its height.

installation guide will help you understand this issue

: Installing a washbasin - video tutorial

: How to install a washbasin with a cabinet with your own hands

Despite all the variety of models on the modern market of sanitary equipment, the tulip sink has enjoyed well-deserved popularity for many years and the demand for this model is only growing. This type of sink is a sink with a pedestal-leg. A siphon and all unaesthetic water communications are hidden in the leg of the "tulip". This sink will make your bathroom more compact and sleek.

Despite all the variety of models on the modern plumbing equipment market, the tulip sink is already in

for many years it has enjoyed well-deserved popularity and the demand for this model is only growing. This type of sink is a sink with a pedestal-leg. A siphon and all unaesthetic water communications are hidden in the leg of the "tulip". This sink will make your bathroom more compact and sleek. Our article will tell you how to install a bathroom sink room. In addition, we suggest that you familiarize yourself with the articles on bathroom renovation: "How to glue the tiles yourself", "Decorating the walls in the bathroom with plastic", "How to make a floor screed in the bathroom?"

You will need:
pencil, drill, dowels, bolts, mixer, siphon for water drainage
Instructions:
1 Select a sink. When choosing a new washbasin, it is necessary to consider not only its color and design. To be fully prepared, you need to make some measurements before going to the store. First, you should measure the width of the wall where the sink is supposed to be installed. It is also necessary to take into account the distance to the water supply valves and the sewer inlet, the diameter of the pipes and the height of the proposed installation.

2 Remove the old sink. Remember to shut off the hot and cold water before starting the dismantling. Disconnect the siphon, unscrew the hoses, remove the mixer, and then the sink itself.

3 Place the sink body on the base without securing it.

4 Slide the new sink against the wall and mark the attachment points with a pencil.

5 Drill the holes and insert the correct size anchor plugs.

6 Assemble the siphon and place it on the sink. Installation of a tulip sink involves assembling and installing a siphon before attaching the sink to the wall.

7 Attach the mixer to the sink. Connect the flexible line to the installation valves. Move the communications into the base of the sink.

8 Fix the sink to the base with two screws using a sleeve.

9 Screw the sink to the wall through the holes in the attachment points and tighten with nuts and washers.

11 Fill the joint between the wall and the sink with silicone sealant.

Advice

It is not necessary to invite plumbers to install the tulip sink. You can easily do it yourself, and this article will tell you how to install the tulip sink yourself.

Before buying such a sink, you need to make some calculations. Namely: accurately measure the distance from the floor to the water inlet valves. Usually the height is 80cm. Remember to close the main hot and cold water valves before starting the installation.

Then you need to attach the sink to the wall and mark where the mounting bolts will be located. In the marked places, make holes with a drill and insert the dowels there. Then install the sink "with a leg" and tighten the nuts. Then connect the mixer and the siphon. The installation of a tulip sink is identical to that of a conventional sink.

Tulip sink and its installation

It is necessary to decide on the place in which the sink will be located even before carrying out all the final work. It is also necessary to decide on the device for the outlet of sewer pipes and the supply of water under the sink.

After the freshly laid tiles are dry, you can start installing the sink.

Initially, you need to attach the washbasin to the pedestal, and then start trying on at the pre-designated installation site. After trying on, it is necessary to mark the location of the mounting holes on the wall located under the sink with a pencil. It is better to crawl under the sink itself; in a different position, it is extremely difficult to determine the exact location.

After that, you can move the sink to the side and start drilling the holes for the fastening pins. The diameter of the drill must exactly match the diameter of the plastic dowels. Plastic dowels usually come with an installation kit. You can buy this set at any plumbing store near you.

There is no need to postpone the purchase of a drain siphon for the sink, it is better to buy everything you need at once and in one store. After the dowels are hammered in, proceed to tightening the studs. It is on these pins that the washbasin will be attached. Now you need to put on the compensating pads and tighten the nuts securely.

Everything must be done very carefully, a little more force and the shell will break. When installing the siphon, make sure that the rubber rings do not slide out. The siphon outlet sleeve is inserted into the sewer outlet.

Specifications

You don't have to call a plumber to install a new sink in your bathroom or kitchen. In a couple of tricks, you can install the sink alone.

Before buying a new tulip sink, you should take into account all the important measures and dimensions taken, namely: the degree of wear of the old sink, the width of the newest sink, at what height to install the sink, the distance from the bottom of the new sink to two water inlet valves. Make measurements accurately.

For the subsequent installation of the sink, it is necessary to purchase a complete set of dowels, mounting bolts, a siphon for water drainage and a mixer.

Close the main cold and hot water shut-off valves before installing the sink.

We dismantle the old sink: disconnect the siphon, unscrew the water supply hoses and remove the mixer. We dismantle the washbasin itself.

Place the new sink against the wall (or install it on a stand) and mark where the fastening bolts will be located.

Drill holes and drive in plastic dowels of the required size.

Insert the threaded screws into the prepared holes in the wall, then install the sink and stand and tighten with the washer nuts.

Connect the mixer with a flexible water supply to the pipes and install a siphon.

Seal the gap between the sink and the wall with silicone around the entire perimeter. When dry, check again that the new sink is firmly fixed to the wall.

With your own hands

How to install a tulip washbasin

The shell of the tulip looks very neat, all communications are hidden behind a stand-leg. It is quite easy to install such a sink yourself, without calling specialists.

In addition to the external beauty, the tulip shell has obvious advantages. The sink is easy to use, durable and the manufacturer offers a huge selection of this sanitary ware.

The sink got the name tulip due to the pedestal leg, which, in addition to the aesthetic component, takes on part of the sink's weight.

So, if the water supply and sewerage pipes are connected to the installation site of the sink, then you can proceed with the installation. You need to start the installation with the preliminary installation of the sink on the leg, thus we can mark the places for the fasteners on the wall. It should be understood that the pedestal only takes a small part of the load; the sink is mounted on brackets in the wall.

Carefully disassemble the structure and make holes of the required diameter using a punch or drill, then install the fasteners.

Before installing the bowl on the fasteners for the convenience of further work, install the mixer and the sewer siphon, and only then fix the bowl to the wall. Then it remains to connect the mixer pipes to the water supply and the sewer siphon directly to the sewer.

Only at the very end, when you are convinced that there is no leakage, you can install a pedestal leg that will hide all pipes and hoses. To extend the life of the product, apply a layer of silicone sealant to the joint between the foot and the bowl to compensate for the small shock loads that will occur at this point.

Prices / Order

INSTALLATION, CONNECTION, REPAIR AND REPLACEMENT OF SINKS. Price, rub.

Installation of the sink on the brackets, units 1200 - 1500 rubles
Installation of a "Tulip" type sink, pcs. 1500 - 2000 rubles.
Installation of the "Water Lily" sink over the washing machine, pcs. 1500 - 2000 rubles.
Installation of a sink on a ready-made underframe (without a mirror canopy), pcs. 2000 - 2500 rubles
Replacement of the sink siphon, pcs. 1000 rubles.
Eliminating leaks under the sink from 800 rubles
Elimination of a simple blockage (cleaning and bulkhead of the siphon, cleaning the pipe) 950 - 1200 rubles.
Elimination of complex blockage of the sink (cleaning the siphon and pipe + capping the pipe) 1200 - 1500 rubles.

The pedestal washbasin combines attractive looks with functionality and is a popular sanitary ware option. It looks simple and it seems that editing will be within the power of any home craftsman, doesn't it?

You have already bought everything, but do not know how to install a tulip sink with your own hands, so as not to involve plumbing? We will help you understand this issue - the article describes the installation process, lists the main mistakes that beginners make when installing the sink on their own.

The main pros and cons of the tulip sink are also analyzed and recommendations are given on the choice of plumbing fixtures with a pedestal for the bathroom.

A characteristic feature of the tulip model is a high, hollow pedestal leg, thanks to which the model acquires a resemblance to the flower from which it got its name.

The support column not only gives the model an elegant look, but also performs a number of useful functions:

The pedestal gives the structure the necessary rigidity, stability and reliability.
In case of mechanical stress on the bowl, the leg takes the load on itself, protecting the sink from damage.
The hollow column allows you to remove service communications (water supply and drainage systems) from view, making the room look neat and beautiful.

The pedestal, like the bowl, can have various decorative designs, due to which a wide variety of models is achieved.

Image gallery

Stage # 3 - connecting to communications

After that, you need to deal with communications. We plug the drain hole with a reverse corrugated hose, which prevents water from flowing. Then, without fixing it, we insert a metal drain cylinder into the hole.

We connect the washbasin to the wiring. In this case, the fastening of the main drain is necessarily carried out with gaskets on the outer and inner sides. Only after this is the connection tightened, but in no case is it tightened in order to avoid mechanical damage to the bowl.

Correct installation of shut-off valves allows you to regulate the correct operation of the mixer when opening and closing the valve using an angle clamp on the rod

We install shut-off valves. We take into account that when the rod is pulled out of the mixer, the valve closes, while when the rod is pushed all the way in, it is open. The valve opening and closing is adjusted by means of an angle clamp on the rod.

Conclusions and useful video on the topic

In the video below, you can clearly see how to install the sink.

As you can see, with the tools available at hand, the tulip installation is easy enough. A little effort and time consuming - and your bathroom will be decorated with an elegant washbasin that resembles the head of a beautiful flower.

Or maybe you just understand the process of installing the sink and you still have unclear points? Feel free to ask questions - we will try to help you.