Brush on the door. How to choose and install a brush seal for various doors

Before using the services of our online store www.website, please read this Agreement carefully.

This agreement, hereinafter referred to as the "Agreement", is concluded between the online store www.

1. On the activities of online stores in the Russian Federation.

Legal relations of purchase and sale in the Russian Federation are regulated by the Civil Code of the Russian Federation (paragraph 2 "Retail purchase and sale", Chapter 30). By virtue of paragraph 3 of Art. 492 of this Code, the provisions of the Law of February 7, 1992 No. 2300-1 “On Protection of Consumer Rights” apply to relations under a retail sale and purchase agreement with the participation of a citizen buyer not regulated by the Civil Code. Article 26.1 of the said Law (Article 26.1 was introduced into the Law by the Federal Law of the Russian Federation of December 21, 2004 No. 171-FZ, which entered into force on January 9, 2005) establishes that a retail sale and purchase agreement can be concluded on the basis of familiarization a consumer with a description of the goods proposed by the seller through catalogs, brochures, booklets, photographs, means of communication (television, postal, radio communications and others) or in other ways that exclude the possibility of direct acquaintance of the buyer with the goods or its sample when concluding an agreement (remote method of selling goods).

Internet commerce belongs to this category, since when ordering a product via the Internet, the buyer does not have the opportunity to directly familiarize himself with the product itself or its sample.

Regulation of this type of trade is carried out on the basis of the Rules for the sale of goods by remote means, established by Decree of the Government of the Russian Federation of September 27, 2007 No. 612. The norms of the above legislative acts apply without restrictions to the purchase and sale of goods through online stores.

The sale of goods through the online store takes place on the basis of a retail sale and purchase agreement concluded between the seller of the goods and the buyer. In accordance with paragraph 2 of Art. 432 of the Civil Code of the Russian Federation, such agreements are concluded by sending an offer (proposal to conclude an agreement) by one of the parties and its acceptance (acceptance of the offer) by the other party. Proposals containing all the essential terms of the contract, which can be accepted by anyone who responds, are recognized as a public offer in accordance with Art. 437 of the Civil Code of the Russian Federation.

Similarly, the offer of goods on a website on the Internet, addressed to an indefinite circle of persons, is recognized by the current legislation of the Russian Federation as a public offer (clause 1, article 494 of the Civil Code of the Russian Federation), if such an offer contains all the essential terms of the retail sale contract (name of goods, price per unit of goods, direct offer for the purchase of goods).

In accordance with the all-Russian classifier of types of economic activity OK 029-2001, approved by the Resolution of the State Standard of November 6, 2001 No. 454-st, the sale of goods via the Internet is retail trade carried out through tele-shops and computer networks (OKVED code 52.61 .2).

Online stores must provide the following information on the website in a form accessible to the consumer:

• offer (conditions for the sale of goods)
• a set of information for consumers (observance of rights to information about the product, manufacturer, seller), certificates, technical documentation, etc., copies of licenses (if the activity is subject to licensing).

The seller's obligations to transfer the goods to the buyer arise from the moment he receives the corresponding message from the buyer about his intention to conclude a contract for the purchase of goods (acceptance).

The acceptance of the buyer is an application in which the potential buyer of the goods must indicate the following:

• the name and address of the seller,
• your last name, first name and patronymic (or another person who is the recipient of the goods),
• the address to which the goods are to be delivered,
• name of the product, article number, brand, variety, number of items included in the package of the purchased product, price of the product,
• type of service (when provided), time of its execution and cost,
• buyer's obligations.

The online store (seller of the goods) is obliged to deliver the goods to the place indicated by the buyer within the time period established by the contract, and if this is not named, to the place of residence of the citizen (clause 1, article 499 of the Civil Code of the Russian Federation). In order for the retail sale contract to be considered fulfilled, it is not necessary to transfer the goods directly to its buyer. In the absence of a buyer, the goods may be transferred to any person who has presented a receipt or other document evidencing the conclusion of an agreement or the delivery of goods (clause 2, article 499 of the Civil Code of the Russian Federation).

Ownership rights to the goods under contracts that include the condition of their delivery by the seller are transferred from the seller to the buyer at the time of delivery of the goods to the buyer.

The possibilities for the consumer to refuse the goods are specified in paragraph 4 of Art. 26.1 of the Law "On Protection of Consumer Rights". The buyer has the right to refuse the goods at any time before its transfer, and after the transfer of the goods - within 14 days.

Return of goods of proper quality is possible if its presentation, consumer properties, as well as a document confirming the fact and conditions of purchase of the specified goods are preserved. The consumer's lack of a document confirming the fact and conditions of the purchase of goods does not deprive him of the opportunity to refer to other evidence of the purchase of goods from this seller.

At the same time, the consumer does not have the right to refuse goods of appropriate quality, having individually defined properties, if the specified product can be used exclusively by the consumer who purchases it.

If the consumer refuses the goods, the seller must return to him the amount of money paid by the consumer under the contract, with the exception of the seller's expenses for the delivery of the returned goods from the consumer, no later than thirty days from the date the consumer makes the relevant request (if necessary, an examination - within 40 days ).

In case of exchange and return, the cost of delivery is paid by the Client. If you received a poor-quality product or you were not delivered what was ordered, the cost of the return is paid by the online store.

In the event of disputes over the quality of the goods or the reasons for the occurrence of defects in the goods, the seller accepts the goods of inadequate quality from the buyer and conducts an examination. The buyer has the right to participate in checking the quality of the goods and challenge the conclusion of the examination in court.

2. Basic provisions

2.1. This Agreement is concluded between the Buyer and the online store at the time of placing the order. The Buyer confirms his agreement with the conditions established by this Agreement by making an application for the purchase of goods when placing an order or registering on the Site.

2.2. These Agreements, as well as information about the product presented on the Site, are a public offer in accordance with Article 435 and Part 2 of Article 437 of the Civil Code of the Russian Federation.

2.3. The relations between the Buyer and the Online Store are subject to the provisions of the Civil Code of the Russian Federation on retail sale and purchase (§ 2 Chapter 30), as well as the Law of the Russian Federation “On Protection of Consumer Rights” dated February 7, 1992 No. 2300-1 and other legal acts adopted in accordance with with them.

2.4. The buyer can be any individual or legal entity capable of accepting and paying for the goods ordered by him in the manner and on the terms established by this Agreement.

2.5. The online store reserves the right to make changes to this Agreement without notice.

2.6. This Agreement shall be considered in the form as it is published on the Site and shall be applied and interpreted in accordance with the laws of the Russian Federation.

3. Product Information and Warranty

3.1. At the request of the Buyer, the manager of the online store is obliged to provide (by phone, via Skype or by e-mail) additional information necessary and sufficient, from the point of view of the Buyer, for him to make a decision to purchase the goods.

3.2. The price of the goods indicated on the Site is a reference and can be changed by the online store unilaterally without prior notice.

3.3. In the event of a change in the price of the goods ordered by the Buyer, the manager of the online store immediately informs the Buyer about this (by phone, via Skype or by e-mail) in order to receive confirmation or cancel the order. If it is impossible to contact the Buyer, this order is considered canceled.

3.4. The invoice issued to the Buyer is valid for 3 business days.

3.5. For all products available in the range of our online store, a guarantee is provided - 2 weeks (14 days) from the date of receipt of the order, or an extended warranty for a longer period, if it is specifically agreed for this product.

3.6. The online store assumes responsibility for all defects of the goods, with the exception of those that arose as a result of the buyer's violation of the rules for using, storing or transporting the goods and through the fault of third parties. If your product turned out to be defective and, despite careful handling, became unusable during the first two weeks of use, please let us know by mail. We will exchange your product for an identical one, and if this model is not in stock, for an item of equal value, or we will refund your money.

4. The procedure for purchasing goods

3.1. The buyer has the right to place an order for any product presented on the Site. Each item can be ordered in any quantity. The order can be placed by the Buyer in the following ways: made by phone, by e-mail or placed independently on the Site.

3.2. After placing an order through the Site, a letter is sent to the Buyer's e-mail confirming the acceptance of the order, indicating the names of the selected goods and the total amount of the order, which is an integral part of this Agreement.

3.3. If the goods are not in stock, the manager of the online store is obliged to inform the Buyer about this (by phone or by e-mail) and inform the possible delivery time of the goods.

3.4. The buyer has the right to make a preliminary order for a product temporarily out of stock, replace it with another product, or cancel the order.

3.5. The Buyer has the right to refuse the ordered goods at any time before it is sent to the Buyer, or at the time of receipt from the courier until payment.

4. Delivery of goods, terms

4.1. Delivery of goods ordered in the online store, in the agreed quantity and assortment, is carried out by a courier service or a transport company.

4.2. The cost of delivery of the goods is paid by the buyer in accordance with the choice of delivery method.

4.3. The maximum delivery time for the goods to the Buyer's address, from the moment the payment for it is received to the current account, is for the regions from 3 to 45 days (delivery time is specified upon purchase). For Moscow and the Moscow region, the delivery time is from 1 day, but not more than 7 days.

5. Payment for goods

5.1. Prepayment for the goods, in the amount of 100% of its value, is made to the current account through the payment services offered to the Buyer, or upon receipt of the goods for cash to the courier at the time of delivery of the goods.

5.2. The goods are paid only in rubles.

5.3. The type of payment depends on the delivery option you choose. When placing an order, the manager of the online store will tell you how you can pay for the purchase. Please note: our couriers accept cash rubles and do not accept payment cards. Payment by card is possible only on the site when placing an order.

Application No. 1
to the Delivery Agreement.

1. Delivery in Moscow and the Moscow region of orders worth more than 3000 rubles:

Delivery geography	Delivery cost, rub.	Delivery terms	Payment Methods
Within the Moscow Ring Road	Is free*	15 days**	Cash to the courier; bank transfer.
Outside the Moscow Ring Road	Plus 30 rubles per 1 km
Pickup	Is free	15 days**	Cash at the store; by credit card Visa or MasterCard on the site; through the Yandex.Money payment system; bank transfer.

2. Delivery in Moscow and the Moscow region for orders less than 3,000 rubles:

* Shipping cost depends on the weight and size of the item. The cost of delivery of oversized goods (weighing more than 5 kg and one of the dimensions of more than 1.5 meters is negotiated individually).

** The exact delivery time will be reported by the manager of the online store. If the delivery date changes, we will notify you of the exact date.

Application №2
to the Payment Options Agreement.

In our online store, the following forms of payment for the order are possible.

1. Cash payment to the courier.

You pay after receiving the goods and checking them. We will be grateful if you can prepare the payment amount without change.

2. By plastic card on the site.

Pay for the order using Visa and MasterCard payment cards immediately after placing it. It's safe and convenient. Our partner is NPO "Yandex.Money". A secure internet connection will keep your card details safe. In case of refusal of the goods, we will return your funds to your account within 10 days.

3. Transfer to a bank account.

After placing the order, we will send you a ready-made receipt by mail, which can be paid at any bank in the country.
As a rule, we see that the order is paid for within 1 - 3 working days after payment and immediately send you the order.

4. Electronic wallet "Yandex.Money".

Fast and secure transfer of funds for those who have electronic cash.

Agreement for the processing of personal data

The buyer, leaving an application on the website www.site, accepts this Consent to the processing, storage and use of his personal data (hereinafter referred to as the Consent).

Acting freely, by his own will and in his own interest, as well as confirming his legal capacity, the Buyer gives his consent to the Branch of Furniture Accessories LLC in Moscow (TIN 6829087131), which is located at 125438, Moscow, st. Avtomotornaya, 7, floor 3, room 301, to process their personal data with the following conditions:

1. This Consent is given to the processing of personal data, both without the use of automation tools, and with their use.

2. Consent is given to the processing of my following personal data: Last name, First name, Patronymic; Date of Birth; contact phone numbers; email addresses; mailing address; place of work and position held; location information; OS type and version; browser type and version; device type and screen resolution; the source from which the buyer came to the site, from which site or through which advertisement; OS and browser language; what pages the user opens and what buttons the user clicks on; ip address, cookies.

3. Personal data is not publicly available.

4. The purpose of processing personal data: processing incoming requests from individuals in order to provide advice and customer support; registration of the buyer on the site; fulfillment by the seller of obligations to the buyer; delivery of goods to the buyer and after-sales service; analytics of the actions of an individual on the website and the functioning of the website; conducting advertising and news mailings; conducting audits and other internal studies in order to improve the quality of services provided.

5. The basis for the processing of personal data is: Art. 24 of the Constitution of the Russian Federation; Article 6 of Federal Law No. 152-FZ “On Personal Data”; present consent to the processing of personal data

6. During the processing of personal data, the following actions will be performed: collection; record; systematization; accumulation; storage; clarification (update, change); extraction; usage; transfer (distribution, provision, access); blocking; removal; destruction.

7. Personal data is processed until the individual unsubscribes from advertising and newsletters. Also, the processing of personal data may be terminated at the request of the subject of personal data. The storage of personal data recorded on paper is carried out in accordance with Federal Law No. 125-FZ “On Archiving in the Russian Federation” and other regulatory legal acts in the field of archiving and archival storage.

8. Consent may be withdrawn by the subject of personal data or his representative by sending a written application to the Branch of Furniture Accessories LLC in Moscow at the address indicated at the beginning of this Consent.

9. In the event that the personal data subject or his representative revokes consent to the processing of personal data, the Moscow branch of Furniture Components LLC has the right to continue processing personal data without the consent of the personal data subject if there are grounds specified in clauses 2–11 of part 1 of the article 6, part 2 of article 10 and part 2 of article 11 of Federal Law No. 152-FZ "On Personal Data" dated July 27, 2006

10. This consent is valid all the time until the termination of the processing of personal data specified in clauses 7 and 8 of this Consent.

11. The Seller reserves the right to make changes unilaterally to these rules, provided that the changes do not contradict the current legislation of the Russian Federation. Changes to the terms of these rules come into force after they are published on the website www.site.

Strip cheeks are widely used today, and they are used to solve both production problems and for home and office needs. Here are the main applications for brush seals, among the many possible:

Sealing of gaps of doors of various versions.

Sealing gates of various types.

Movement orientation and positioning.

Transportation.

Protection and shielding.

Framing and covering gaps.

Cleaning and striping.

Cleaning and surface treatment.

Polypropylene (length 3000mm)

prices from 22.03.2019

h, F or Y) Brush without profile

15 mm 450 rub./m. 300 rub./m.h-profile F-profile

25 mm 460 rubles/m. 310 rub./m.

35 mm 530 rubles/m. 380 rub./m.

45 mm 550 rubles/m. 400 rub./m.

55 mm 570 rubles/m. 420 rub./m.

65 mm 630 rubles/m. 480 rub./m.

75 mm 650 rubles/m. 500 rub./m.

85 mm 680 rubles/m. 530 rub./m.

95 mm 1070 rubles/m. 920 rub./m.Y -profile

105 mm 1130 rubles/m. 980 rub./m.

115 mm 1180 rubles/m. 1030 rub./m.

125 mm 1300 rub./m. 1150 rub./m.

135 mm 1370 rubles/m. 1220 rub./m.

145 mm 1540 rub./m. 1390 rub./m.

155 mm 1660 rubles/m. 1510 rub./m.

Our prices for standard brushes made of high quality

Nylon (Germany) (length 3000mm)

prices from 22.03.2019

Bristle height Profiled brush ( h, F or Y) Brush without profile

15 mm 740 rubles/m. 590 rub./m.h-profile F-profile

25 mm 800 rub./m. 650 rub./m.

35 mm 880 rubles/m. 730 rub./m.

45 mm 990 rubles/m. 840 rub./m.

55 mm 1070 rubles/m. 920 rub./m.

65 mm 1110 rubles/m. 960 rub./m.

75 mm 1130 rubles/m. 980 rub./m.

85 mm 1190 rub./m. 1040 rub./m.

95 mm 1270 rub./m. 1120 rub./m.Y -profile

105 mm 1330 rubles/m. 1180 rub./m.

115 mm 1400 rub./m. 1250 rub./m.

125 mm 1500 rub./m. 1350 rub./m.

135 mm 1670 rubles/m. 1420 rub./m.

145 mm 1740 rub./m. 1590 rub./m.

155 mm 1860 rubles/m. 1710 rub./m.

Advantages when using strip brushes

Reduced space heating/cooling costs.

Almost all types of gates and doors have gaps between moving parts (without which their operation would be difficult). This gap makes it possible to freely penetrate warm or cold air into the room. Large warehouses and production facilities with large gate and door surface areas suffer the most. You have to spend a lot of money on heating and air conditioning such premises.

After installing strip sealing brushes, this problem is solved. Sealing brushes are an excellent barrier to heat loss. The seal will help reduce losses due to air leakage by up to 98%. It also helps to save heat by installing strip brushes on industrial furnaces, improving their operation.

Barrier to snow, dust and debris.

By installing sealing brushes on the gates and doors, you will significantly reduce the penetration of dust and debris into the premises. In addition, these seals can protect moving machine parts from the ingress of various types of contaminants, which can prevent shutdowns and costly repairs.

Wear resistance, flexibility and soft pile material.

The strip brushes are made of high quality nylon and polypropylene with increased wear resistance, which guarantees a long service life, even with intensive use, while they can be used on any surface without fear of damaging it. Compared to rubber and vinyl seals, the brushes are more flexible, so they contact uneven surfaces much more closely. From the above it follows that sealing brushes are ideal for working on uneven surfaces.

Noise isolation.

Sealing brushes are an excellent noise barrier in test areas, production halls or just a noisy street.

Wide temperature resistance

On request, it is possible to manufacture strip brushes from heat-resistant nylon. Such seals will retain their properties at temperatures from -50°C to +200°C.

Protection against the entry of pests.

Strip brushes will reliably protect food warehouses from the penetration of small insects, and horsehair brushes will scare away rodents.

Sunlight protection.

The sealing brushes are dense enough to prevent sunlight from entering through gaps in the door leaf or equipment guards, while providing reliable protection for light-sensitive elements.

The name of the brush seal - "Schlegel" (Schlegel) - gained fame along with German brand products. Now the seal for doors of cabinets and other furniture is produced by many companies in different countries, it is also known as "buffer tape", "shock absorber-seal". For entrance doors in public institutions, a door closer is usually used; in other cases, self-adhesive shlegel is popular.
The material for such a seal is a fleecy tape. Schlegel for sliding doors is placed in the grooves of the profile, opposite all ends of the wings. To soften the blows of the door on the frame, not to let dust in, to hide gaps, to protect the fingers of the smallest furniture users - all these functions are assigned to the door shlegel.

Buy a brush seal in our online store!

The buffer tape comes with an adhesive and non-adhesive base, different colors - can be matched to the profile. It is made of propylene, with a pile of a certain length - the material is waterproof, not afraid of household chemicals and all sorts of pests, and has an antibacterial effect. In our online store there are two options for the height of the brush seal: SSC-106 - 6 mm, SSC-112 - 12 mm. It may be necessary to buy a brush seal at retail in Moscow if this useful part was not found in the selected furniture.

Sliding doors, having a number of features, in comparison with the classic swing doors, have a significant drawback. They do not guarantee a snug fit of the canvases to each other, they form gaps both under and above them. For visual overlap of cracks, protection from dust, insects, partial insulation, brush seals (flashings) are used.

We will briefly review the types of brush seals for sliding doors, as well as cases where their use is appropriate. On what types of sliding plastic doors or windows, in addition to interior ones, they can be used.

What are they made from?

The brush seal (flash) is an ordinary brush, the villi of which are made of a wide variety of materials, depending on the flooring, window sill material, and their operating conditions.

Most often, for the manufacture of brush seals, synthetic fibers are used: nylon, polyethylene, silicone, synthetic rubber, natural bristles or metal wire.

The basis for its manufacture can be polymeric woven materials, rigid bases - plastic, rubber, metal.

Usually, the accessory is mounted at the bottom of sliding plastic doors (windows) blocking the gap formed at the bottom of the door with the upper location of the rollers on which the canvas slides. When it is used for "French" windows that do not have a plastic frame, it can be located around the entire perimeter of the glass, be transparent (silicone) acting as a flashing.

What is it used for?

Most designs of sliding plastic doors (windows), with rare exceptions (lifting-sliding - as in buses), do not provide an absolutely tight fit of the leaf to the door (window) frame, it becomes necessary to partially eliminate this drawback.

The use of traditional rubber (silicone) seals is impossible due to the high coefficient of friction of these materials and rapid failure, difficulty in opening doors, and damage to the flooring. Quite another matter is a soft, dense, multi-row brush that easily glides over any surface, blocking the resulting gap.

But the brush does not guarantee insulation, getting rid of odors if the structure is installed in the kitchen, from frost and drafts, if a French window leading to the terrace is equipped with such a flashing. But the flashing will reliably protect the room from the penetration of dust, insects, raindrops knocking on the window.

Depending on whether brush seals are used on plastic or wooden sliding doors - external, leading to the street or internal - interior, the structure, height, thickness of the material from which they are made differ.

For external street brush seals used for insulation, porous rubber is used, which has a very low thermal conductivity. Due to the large width of the strip, several rows of bristles, their tight fit to each other, it provides quite effective protection against heat loss in the room and insulation.

When brush strips are used in interior sliding wooden structures, or for closets, where the main purpose of use is not to insulate, but to prevent dust from entering (flashes). They do not have such a dense structure (2-3 rows of tufts of bristles).

Brush strips differ in design. For wooden, metal sliding - often made on an adhesive basis, which allows you to quickly mount, if necessary - just as quickly replaced.

For plastic sliding windows, the bristles are mounted on a metal frame with a profile section, which is simply inserted into the corresponding groove of plastic products. For each manufacturer of doors (windows), only its "branded" profile is used. These items are not interchangeable.

For glass sashes, silicone (transparent) brush seals are used, which have a U-shaped profile, put on the end of the glass, previously degreased and moistened with water.

When dry, they are firmly fixed.

Summing up

The use of brush seals is a necessary measure, which is caused by the imperfection of the design of plastic windows, when cheap designs are used that do not provide for complete sealing. They do not prevent heat loss, drafts, or the spread of odors. But they effectively cope with the task of protecting the premises from dust, the penetration of insects from the street. The use of such an accessory is permissible only on verandas, terraces that are not heated. If you use them to insulate warm rooms, this will lead to an unjustified overexpenditure of thermal energy due to high losses through a loose structure.

A brush seal for doors (schlegel) is used to eliminate gaps and dampen the closing and opening of the wings. This useful element is most often installed by the manufacturer. In the absence of it, it is advisable to do it yourself.

The described type of product is a tape base with a pile. It can be presented:

• felt;
• nylon bristles;
• silicone;
• polyethylene;
• metal wire;
• natural bristles.

Brush seals for doors, or flashings, have differences in the bases, which are produced with an adhesive layer and without adhesive application. They are made of polymeric materials, plastic, metal.

Scope of application

The brush seal is used more often for sliding doors, roller and sectional doors, windows, wardrobes. A characteristic quality of these designs is the loose closure they provide. When installing this hardware provides:

1. long period of operation;
2. depreciation of parts;
3. protection against dust and moisture;
4. thermal insulation;
5. soundproofing;
6. preventing insects from entering the premises.

They also get rid of the gaps between the door leaf and the floor and in the hinged structure. In this case, the lower sections of the valves will be involved. This is a profitable alternative to thresholds.

Product Features

Sealing brushes have features for different types of doors. They are available in different densities, heights and widths of the bristles. The height varies from 3 mm to 15 cm. Products are made in various colors. The entire range is chemically neutral and resistant to UV radiation and abrasion. Used over a wide temperature range.

Mounting methods vary depending on the mounting location and design. They can consist of simple gluing by means of an applied adhesive layer or they can be pressed into the groove of the profile.

How to choose

To select fittings, it is enough to know what structure it will be attached to and what size gap needs to be eliminated. For wooden and metal sheets, a flashing is purchased on an adhesive base with bristles of the appropriate size. For glass, a shlegel is produced based on a U-shaped profile. In window and some types of door panels, the buffer tape is inserted into the corresponding groove.

It is recommended to glue fittings with a frequent and short pile coating on the ends of the wings of sliding wardrobes and doors. The color is selected in accordance with the interior.

How to attach with your own hands

If there is no door seal, you must install the brush seal yourself. Installing a self-adhesive seal will not cause difficulties even for a person who does not have special training.

Bristle or adhesive-based metal wire will help to deal with gaps in sliding or swing gates. It is best to protect wooden canvases in such a way that they are in a metal frame - the selected material for insulation will be attached to it.

If these are interior structures, then a strip linear brush on the adhesive layer can protect against dust penetration into the room and heat leakage. To achieve good insulation, flashings are used from multi-row and frequent pile. The surface on which the seal is to be installed must first be cleaned of debris and degreased with a solvent or alcohol. Then the protective film is gradually removed and the tape is applied to the selected area.

Particular attention is paid to the edges of the fasteners. For reliability, they can be additionally smeared with glue and pressed.

When processing structures of sliding systems, a number of features should be taken into account. The flashing in these types of ceilings must be installed on the connecting parts using an F-shaped profile. The door leaf is removed, and the brush holder is screwed or glued to the end side. It is available in metal and plastic versions. The choice of brush models consists in the selection of material and taking into account that the product will be attached to the groove.

During the installation process, stretching of the pressed tape is not allowed. Otherwise, after cutting from the edges, it will take its original shape, that is, it will not be enough for the required length.

In the case of attaching a U-shaped profile to glass, the process of cleaning and degreasing surfaces is also provided. Immediately before installing the fittings, the area of ​​​​the contact sheet is wetted with water.

Some manufacturers produce clips for fastening the Schlegel, which are included in the sales package. Installation in this case will not cause difficulties.

Due to the versatility of application, ease of installation, a rich assortment of designs, this useful element is gaining popularity.