Block house outdoor. Block house finishing: material advantages and installation rules

The decoration of buildings involves the use of modern cladding, thanks to which the building not only acquires a beautiful appearance, but also is reliably protected from heat losses. On the construction market, you can purchase various materials for facing work, but the block house deserves special attention. The material is characterized by high performance. It is easy to install, perfectly emphasizes the style of any architectural building, giving it chic and individuality.

Features and Specifications

Block house is a unique decorative material. It is produced in the form of boards with a flat inner and convex outer side. Also, the device of the product includes docking parts (thorns and grooves), which provide reliable fastening, allowing you to avoid the formation of gaps and cracks during installation. For the manufacture of a block house, various woods are used, but most often they choose raw materials from deciduous and coniferous trees, which are characterized by excellent aesthetic qualities, hardness and strength.

Boards undergo high-quality processing during the production process, so they are suitable for installation in any conditions. The main feature of the material is that it does not crack during operation. This is due to the fact that in the manufacture of a block house it is equipped with special grooves that relieve stress from the tree.

The material is produced in various sizes, which makes it possible to use it for both interior and exterior decoration. Sheathing of premises, as a rule, is carried out using a wooden block house with a section of 46 * 180 mm, and metal or vinyl panels are chosen for exterior decoration of buildings.

The main characteristic of the boards is their class, which is determined by the quality of the wood and the way it is processed.

Therefore, on sale you can find products of two options.

Block house of the highest category. It is considered the highest quality, intended mainly for exterior cladding. Such boards are characterized by the absence of chips and holes.
Simple panels. Such products have a lower price, so often on the surface of such boards you can find a slight "fringe" or "hairiness".

It is also worth noting that the block house has different panel thicknesses, ranging from 20 mm to 50 mm. In this case, the minimum width of the boards is 70 mm, and the maximum - 190 mm. Before installing decorative wooden panels, they must be carefully processed: primed and coated with several layers of varnish or paint. After drying, the painted wood is sanded and covered with a protective layer, which must be renewed every 5 years.

Since the block house is available in a rich assortment of colors and textures, it can be used for sheathing any type of premises and buildings, regardless of the style direction. Country houses look especially beautiful in this design. Finishing is a real decoration of landscape design. If you sheathe the walls inside the building with material, you will get an unusual effect, due to which the interior will be filled with comfort and homely warmth.

Types: advantages and disadvantages

Since the block house is made from various raw materials, it is divided into several types. The most popular is the material made from natural wood. The main advantage of such boards is their environmental friendliness. The basis of a wooden block house can be spruce, pine or larch, so choosing it for the exterior cladding of the house, you can get an unusual decor with an imitation of a log cabin.

Depending on the quality of the array, wooden panels are divided into three groups.

Class "C". Boards have a well planed surface, without knots and other large defects. However, for this product, slight darkening, chips and scratches are allowed.
Class "B". Cloths are characterized by a low price, therefore, traces of mechanical damage, light and dark knots may be present on their surface.
Extra class. The boards are perfectly processed and devoid of any flaws. They are expensive, as they are characterized by high quality, which is achieved by a manual selection method.

Regardless of the class of production, the following advantages of a wooden block house can be distinguished:

good heat and noise insulation;
presentable appearance;
naturalness.

As for the negative properties, such boards are expensive, ignite easily and require antiseptic treatment.

If you are planning a budget option for finishing, then vinyl panels will be the right choice. They are sold at an affordable price, imitate natural wood. The main advantage of the products is that before installation they do not need to be additionally impregnated with antiseptics and varnished. In addition, compared to wood, they have a longer service life and do not require special care. Since the vinyl block house is lightweight, it does not put pressure on the structure of the building.

The advantages of vinyl panels include:

a huge selection of textures and colors;
ease of installation;
durability;
resistance to moisture and ultraviolet.

There are few disadvantages of such a material: it is sensitive to temperature changes, requires compliance with a special installation technology, and the surface of such boards looks dimmer than an array.

A steel block house is considered no less popular. It is a curved profile painted to look like natural wood. Thanks to this material, it is possible not only to decorate the facades, but also to carry out high-quality thermal insulation. The main advantage of the product is its super strength, but like vinyl panels, the material is only suitable for exterior decoration, as it looks unpresentable indoors.

The advantages of steel panels include:

long service life;
affordable price;
ease of installation work;
moisture resistance and fire safety.

However, despite the positive characteristics, steel elements also have disadvantages. They quickly heat up in the sun, and their installation requires the use of additional components.

Criterias of choice

The construction market amazes with a huge assortment of block houses, but in order to perform a high-quality finish, you need to choose the right material.

The product should not only have a beautiful appearance, but also have performance characteristics that allow it to last a long time.

A huge role in the choice of panels is played by their width. For facade cladding, it is better to choose a board with a width of at least 159 mm, and for interior decoration - 80 mm. For wall cladding in rooms, the use of wide panels is not recommended, as they visually reduce the area of \u200b\u200bthe room.
Particular attention must be paid to the type of wood from which the material is made. Larch is suitable for outdoor work, it is resistant to moisture, has an original texture and color. When decorating inside buildings, it is best to give preference to linden or oak. They provide excellent waterproofing and insulation of the room.

When choosing a block house, you must also specify the class of its wood. Perfect cladding can only be obtained from high-quality panels of the highest category. Therefore, all boards must be packed in a single film, have the same width and length. It is not allowed to purchase material on the surface of which there are cracks, knots and resin stains.
It is recommended to buy boards with a length of at least 6 m, this will reduce the number of joints during installation.
If the products do not have certificates, and the moisture content of the boards exceeds 20%, then they cannot be used for finishing.

Preparation and accessories

Before starting installation work, the block house should be prepared. For this, a short period of time is allocated for the acclimatization of the material. This usually takes several days. At this time, insulation, waterproofing are laid outside the walls and the material is calculated in a cube.

Also, the installation of panels provides for the assembly of a vertical crate from slats or bars. The distance between the frame elements should be 70 cm. To provide the necessary waterproofing, a thin frame is additionally attached to the self-tapping screws over the insulated crate.

To install the boards, you need to purchase certain components.

Universal straps.
Hanging profiles. Their fastening is carried out, as a rule, above window openings to protect the finish from moisture. If the facade consists of several levels, then profiles are used between transitions.
Starting bar. It is necessary for mounting the bottom row of boards.
Finish profile. It is placed along the edges of the wall to fix the last panels.
Connecting strips and corners.
Special fastening elements (kleimer and self-tapping screws).

Installation tools should consist of a standard set, including a tape measure, level, screwdriver, hammer and drill.

Technology and installation rules

When the crate is made, it will be possible to begin to mount the panels of the block house. Laying the material is a simple process, so the work can be done independently without resorting to the help of specialists.

To perform the installation correctly, it is enough to follow the installation rules. It is also important to ensure a solid fastening of the finish. Boards to the frame must be fastened with metal brackets or clamps. If the cladding is carried out with thick panels, it is recommended to use self-tapping screws coated with an anti-corrosion compound.

The installation of the panels begins with the fact that they are laid out in the room in such a way that the spike of each part is on top and the groove is on the bottom. This simplifies further workflow and reduces the risk of dust in the grooves. It is important to provide a small gap between the ceiling, floor surface and sheathing to ensure natural ventilation. You also need to leave gaps between the panels themselves when they are docked. This is done so that the skin does not undergo deformation during temperature changes and moisture on its surface.

It is worth considering that the exterior decoration of the facade requires the presence of such additional materials as insulation, antiseptic, primer and vapor barrier film. Before sheathing the house with a block house, you need to install a vapor barrier. The work is carried out with the help of staples and a stapler, with the help of which the film is fixed to the frame, forming an overlap of 10-15 cm.

If the block house is mounted horizontally, then the bottom corner should be sheathed first. The panel is installed on the profile and fixed along the entire length with a clamp, which, in turn, is attached to the crate with self-tapping screws. Then the second panel is inserted into the cutters, its groove should “look” down.

Observing the above technology, the entire wall should be sheathed. In some cases, the installation of the material is performed not with clamps, but with self-tapping screws. In this case, it is important to accurately join the panels by screwing in the screws at an angle of 45 degrees.

As for the design of the corners inside, they are decorated with a 5 × 5 cm beam or special skirting boards. At the same time, experts advise installing bars before sheathing. Thanks to this, the finish is more attractive.

We must not forget about the lining of window and doorways. The most important thing is to protect them from the penetration of dust, precipitation and cold air. It is better to choose platbands with carved patterns or unusual ornaments. They can be curly, round or flat.

The block house looks interesting in the interior of residential premises.

Such cladding is practically no different from the outer cladding, but is characterized by its own nuances:

for work, usually narrow panels are used;
internal and external corners are drawn up at the end of the entire installation.

It is not recommended to use a block house for decorating walls in rooms with high humidity. If the style provides for the presence of panels in the bathroom or in the kitchen, then they must be covered with a protective layer of varnish. To extend the life of such a sheathing, it should also be treated with mastic and stain.

It is desirable to update the interior decoration periodically. To do this, every 5-7 years a protective layer is applied to it, after removing the old coating. The walls of the premises can be sheathed with boards both vertically and horizontally.

Can you make your own?

Despite the fact that the modern market is represented by a chic assortment of block houses, many owners of suburban housing prefer to make it with their own hands, rather than purchase it ready-made. At first glance, this may seem complicated, but if you have a small workshop and a woodworking machine at hand, then the process turns out to be quite doable.

Today, it is examples of traditional architecture that are becoming a trend, gaining popularity. It is prestigious to have a beautiful wooden house, a country cottage built of logs. At the same time, new technologies and modern materials appear: they allow you to build buildings quickly, reduce the load on the foundation and achieve good energy efficiency parameters. In addition, construction costs are also reduced.

You can build a cottage from an innovative material, but visually it will appear wooden. This is achievable if you buy a block house. It is a plate with a complex cross-section: their inner surface is flat, but the outer surface imitates a rounded log. Sheathing a house with such lumber creates a complete illusion of wooden masonry.

Block house features

Many are interested in how much a block house costs, how profitable it is to use it for finishing work, facade design. Manufacturers present options in various price categories. The type of lumber is decisive here.

Experts and craftsmen note: strength, durability does not depend on the variety. All panels are equally reliable, have decent performance properties. Boards are made from proven raw materials, dried in the same chambers, using a single technology. But the varieties are divided at the final stage of production. When sorting, visual characteristics are taken into account to a greater extent: the number of darkening, the density of traces from knots, the accuracy of geometry.

Attention deserves the advantages of demanded lumber:

The quality is strictly controlled. All boards are durable, attract high stability, wear resistance.
People love the environment. The material is natural, natural wood is used.
Block house is not subject to deformation. Its shape will remain original even after prolonged use.
Lumber is adapted for use in difficult climatic conditions. He is not afraid of serious temperature differences, humidity and wind loads.
Installation is carried out without problems, ventilation cuts are provided to prevent the accumulation of condensate.

Block house in the company "StroyLesGroup" attracts by the price per m2, since the material is supplied from the manufacturer, excluding intermediaries.

Block house from StroyLesGroup

Choose reliable building materials in a specialized company! We have a large assortment, panels of different grades are available in any required volume. Warehouse facilities help to quickly handle orders for large deliveries. Delivery is carried out promptly, strictly within the specified time.

Many people dream of a wooden house, because it is the standard of ecological cleanliness and beauty. But the construction entirely of wood will cost the customer a round sum, which not everyone can afford. Sheathing the walls of the house with a block house is one of the options for saving money and getting the desired effect.

How to sheathe a house with a block house - an alternative to an expensive log house

A modern block house is one of the types of wagon boards, which has the outer side of the panel in the form of a rounded log. This sheathing material is used for finishing the building, both from the outside and from the inside. The main advantage of wall cladding with a block house is its excellent appearance and ease of installation. Each panel has a groove-thorn connection system, which allows you to mount it yourself without special tools and in the absence of professional skills.

Arrangement of internal and external decoration using log imitation is a practical and modern step. Now you will find on the construction market, as well as plastic and metal. Wooden has several quality classes, for example, class Extra and class A are best suited for interior decoration, since they have a minimum number of knots and the absence of any other wood defects. A low-end wooden block house is great for exterior decoration.

Plastic products can be both colored in bulk and have several layers of paint on the front side. It is better to choose mass-dyed, as well as products made from primary raw materials. Siding made from waste has a significantly shorter lifespan.

Advantages and disadvantages of materials - choose carefully

These procedures must be performed at least once every five years, although for a longer service life of the finishing material, it will not be superfluous to re-paint and impregnate every two years. In addition, a wooden block house is one of the most expensive types of such siding.

Metal and plastic types also have a significant disadvantage compared to wood - whatever one may say, they only imitate the appearance of a wood texture.

From afar, the difference will be difficult to determine, but close up, this visual deception is revealed. All species are united by one undoubted quality - during the sheathing of the house with a block house there is an opportunity to additionally insulate the house. Not to mention the aesthetic perception of a sheathed house - even the most nondescript cinder block building will take on the appearance of a village hut, with the attractiveness inherent in such buildings.

Sheathing a house with a block house with your own hands - features of choice

Despite the external simplicity, it is not the most common task to choose a suitable wooden block house for the exterior decoration of the facade of the house. First, you should focus on the width of the block house. The fact is that each manufacturer has its own measurements, and the material purchased in two different places may differ in terms of thickness and width.

Therefore, try to choose the most common sizes. For example, for the exterior of a building, it is best to use wide boards up to 150 mm wide. Secondly, it is necessary to determine the type of wood from which the board is made. For the external siding of a block house, you need to use boards of coniferous trees (spruce, pine, larch) - they have an increased resistance to the rotting process.

It is also necessary to find out from which region of the country this board came on sale. Wood from the north has a higher density, which means it is more durable.. This can be determined even visually - the northern wood between the annual rings has a smaller distance. Naturally, for finishing the facade of the building with a block house, you can use a board not only from the northern forests.

Technology for sheathing a house with a block house - step by step instructions

In addition to the block house itself, you will also need other finishing materials - it is a sin not to use this opportunity and not to insulate the building at the same time. That the sheathing of a stone house, that the sheathing of a wooden house with a block house, have no fundamental differences. To begin with, the walls must be surrounded by a layer of vapor barrier so that moisture from the house does not penetrate outside, forming condensate, which will significantly reduce the thermal insulation properties of materials.

A vapor barrier membrane is available at every hardware store. It is fastened with an overlap, joining strips of 10–15 cm. It is best to seal the joints with aluminum tape. Then you can proceed directly to the cladding of the building.

How to sheathe a house with a block house - a step by step diagram

Step 1: Block house crate

The size of the bars that are selected directly depends on the thickness of the thermal insulation plates. For example, for the central regions, the maximum thickness varies in the range of 10 cm. The distance between the wooden blocks should be no more than 60 cm, although it is best to adjust it to the size of the insulation boards. Before fastening, the selected bars must be treated with an antiseptic. For installation, it is better to use self-tapping screws or special nails (if the wall is made of stone - dowels), with wide caps.

Eco-friendly houses made of natural materials have become very popular in recent decades. One of the most common are traditional wooden buildings. Such structures are suitable both as a summer cottage or a capital cottage for year-round living, and for small office buildings.

And enthusiasts say that it is worth using a practical block house.

Why wooden houses often need cladding

Houses made of any wooden building material have long been a priority among citizens. The leaders of sales in this segment are profiled or glued beams, logs. Such materials are already dried, equipped with saw cuts, connecting elements, and prepared to the maximum for the construction of reliable walls.

Supporters of naturalism prefer to use a traditional log, which implies a long period of shrinkage of the structure - with this method, the flaws in the blanks will always be in sight. In this case, sheathing the house with a block house is recommended no earlier than a year or two after the completion of construction.

The walls of self-built houses often have visible defects or need additional insulation, since the climate in most regions of the country is very unstable. It would be quite a reasonable step to clad a wooden structure on the outside, which does not reduce the usable space of the premises and gives the building a special charm. Exterior wall decoration for frame houses is necessary - this method will create a cozy atmosphere inside the building and ennoble its appearance from the outside.

A separate category is capital old buildings, which lose their external attractiveness and become less comfortable. Additional presentable wall protection will extend the life of the house: it will protect against precipitation, mechanical damage. The insulation is laid outside and combined with a hydro-barrier, and the surface of the old tree is cleaned of paint, varnishes, covered with antiseptic compounds. Diligent owners can do all the work with their own hands.

Block house: advantages, species diversity and selection rules

Block house is considered the most successful and presentable type of wall paneling. Its environmental friendliness is undeniable. Most often, softwood is used as the starting material for panels. Many consumers are attracted by the ability of lamellas for many years to release phytoncides that inhibit the development of bacteria.

Strength, excellent insulating properties in combination with maintaining natural air exchange are arguments that can be decisive when choosing a facing material. Also important is the ease of installation of the structure - any craftsman can do it with his own hands - and the absence of "wet" work.

Professionals note that the pine block house is indispensable for the external cladding of the walls of a residential building, but for saunas and baths, dense hardwood panels will be a rational choice. In order to choose the best variety and not be disappointed in the material, you need to decide on the price category before the start of purchases:

Class A - an elite block house of excellent quality without the slightest error. It remains the most expensive and very presentable.
Class B - implies the presence of minor knots - up to 3 cm - on the front side, which, with a skillful arrangement, can even decorate the facade. And on the back side, small chips are acceptable.
Class B - the number of knots and their configuration is not regulated.

The grade of material for the walls is selected depending on the purpose of the building and the aesthetic preferences of each. If you plan to build a house with your own hands, then when choosing lamellas on your own, you should carefully examine each segment and put aside specimens with cracks and mold.

Masters draw the attention of beginners to special nuances: the closer the lines of annual rings are to each other, the stronger and denser the wood. The implementation of sheathing with a blockhouse of the building from the outside involves a wider modification of the board - about 150 mm.

Sheathing the house with a block house is made on a prepared frame, which is easy to build with your own hands from slats or ordinary boards. A similar crate is located along the walls in increments of 500-700 mm. And the resulting gap is great for laying insulating materials. The layer thickness is calculated depending on the region. For example: in winter, the thermometer shows from -8 to -12 o, which means that a five-centimeter thickness of the material is enough.

If you plan to use mineral wool, then the step is selected in proportion to the existing plates. And in front of the block house panels there is a layer of wind protection. Any type of waterproofing will extend the life of the base material.

To do the work with your own hands, you will need a screwdriver, which can be replaced with a conventional drill. A square, saw or grinder with a set of disks will also come in handy.

When constructing the frame, plumb lines and levels are used - the rails must be installed strictly vertically. Only in this case, the lining will have the correct geometric shapes. If samples of class B or C are available, then before work, you need to scrupulously inspect them and plan the location of the panels. Defects should be masked with a special putty. Any block house is treated with impregnations.

It is important to correctly cut the material, carefully measuring all the parameters of the walls with your own hands, taking into account the presence of door and window openings.

For sheathing the outer walls of a wooden structure, the block house is laid horizontally. The spikes should be located on top: in this way they will protect the grooves from rainwater. Sealed connection - "thorn-groove" ensures the tightness of the structure.

Experienced craftsmen prefer to build corners by perfectly washing down the lamellas at an angle of 45 degrees. And for those who do such work for the first time with their own hands, it is worth using a decorative outer corner. To ennoble the joints near the window or door, you need to purchase cashiers.

For fastening to the frame of a wide block, clamps and self-tapping screws are used: holes are carefully drilled in the panels, which are then masked with the help of selected putty or closed with special plugs.

The finishing stage is the application of varnish or paint to the block house. Renewal of the coating must be done every 5-7 years.

Appearance is an important quality of the house, so its design should be taken with all responsibility. When choosing a material for finishing, it is worth considering its properties, it must be durable, wear-resistant, environmentally friendly. But in addition to these qualities, he must give the building a respectable appearance, make it expressive, attract the surrounding views. If you want to make the house unique, original, stylish, then you should think about using the block house material. Exterior decoration will make the facade play with completely new colors. Such a finish will ensure long wear and tear of the house, while it will not be necessary to repair the facade and other parts of the building for a long period. But before using this material, you should carefully consider its properties.

Block house is a natural material used for interior and exterior decoration of the house. In its structural properties, it is similar to a tree. It has a pleasant smell of wood, which has a beneficial effect on the nervous system. Besides , it creates a cozy , comfortable , warm atmosphere in the house . Since the wood heats up and is able to retain heat for a long time, the block house is used for facing residential buildings, baths, saunas, balconies, loggias. The exterior finish is made from a wide block of hausa, which imitates wide logs.

The individual components of the block house are fastened together using the tongue and groove method. The difference from wood is the size of this material, as well as the bulge of the front side, similar to rounded log . In order to understand what a block house looks like, you should look at the photo from varieties this material used for finishing houses.

Advantages and disadvantages

In order for the finishing of the house with a block house to be of high quality, it is necessary to consider the main pros and cons of this material, and there are many of them.

Among the positive qualities, it is worth highlighting a number of properties:

environmental friendliness - since the basis of this material is made from natural wood, which is preliminarily dried, it can be attributed to environmentally friendly varieties. Often, coniferous wood is used for production, which has high strength qualities. It allows you to maintain a normal microclimate in the room;
high strength - buildings with a house block finish are able to withstand various negative environmental influences. Houses can withstand rain, hail, strong winds, as well as other mechanical impacts. Steadfastly tolerates the influence of sunlight, while not losing its properties, qualities;
has high waterproofing - this quality ensures that dampness, fungus, and various mold lesions will never occur in a house with a finish from this material;
excellent aesthetic appearance - block house cladding of structures, houses, buildings gives them a presentable appearance. The outer cladding of this base will always be bright, unusual, expressive. The interior decoration also has a beautiful view. Walls made of this material do not require additional finishing work;
easy assembly - its assembly is quite simple, does not require much labor. Its installation can be done independently, while without the involvement of lifting equipment;
light weight - due to the fact that the material has a small mass, it does not create an additional load on the foundation.

Block house has negative qualities, but they are quite few:

has high flammability - in order to reduce the likelihood of fire, the base must be treated with special compounds that reduce the ignition of the lining;
can easily be deformed, lose shape. If during installation, by negligence, the lining is hit or dropped, then a dent may remain on the base, which will further spoil the entire appearance of the finish;
despite the fact that this material has good waterproofing, after its installation it is necessary to properly equip ventilation. Otherwise, dampness, fungus, mold may appear in the room over time.

Types of block house for exterior decoration

Block house can differ in a number of important characteristics.

By quality class

The quality class of a block house depends on the wood from which it is made. The classification divides the lining into several classes:

class C is the third grade. This foundation cannot be called poor quality, but it is far from ideal. The surface of these products has a poorly planed structure, sometimes black, falling knots may be present in it, and there may also be various holes from knots. In addition, on the basis of this class, the presence of mechanical damage, cracks, and remnants of bark from a tree is acceptable. Usually this material is of low quality, rarely used for finishing the front of houses;
class B - in terms of their properties, products of this class are similar to class C. They are characterized by the presence of knots, holes, as well as small mechanical damage, holes, cracks;
class A - these products have good qualities. The base has a perfectly planed structure. Only small black dots, not falling out knots, may be present on the surface. Lining of this class can be used for internal, external cladding of the house;
extra class E - this is a perfectly selected base, without defects, damage. Products of this class are expensive, but their properties justify the price.

In order to understand the difference between products of different classes, you must definitely look at the photo. Looking at the photo, you can accurately see the differences in the structure of products of each class.

Classification of a wooden block house

Made from vinyl base

These products are a complete imitation of wood. They have almost the same properties, the difference is only in cost. Vinyl products are much cheaper than wood products.

The advantages of vinyl products are as follows:

easy maintenance - after installation, vinyl panels do not need to be finished with additional finishing materials, they retain their original appearance for a long time even without maintenance;
have a long service life. Vinyl panels can last much longer than wood;
light weight does not create pressure on the foundation of the structure;
easy installation - vinyl panels can be installed independently, without the use of additional lifting equipment;
the basis of this type withstands exposure to sunlight. Under the sun's rays, it does not fade, does not lose color.

The base has a non-uniform surface, which may not always coincide with the type of wood. In addition, it is sensitive to temperature changes; dampness, fungus, and mold often occur in houses with cladding made of this material.

Steel

Another type of block house is a metal lining. It has a painted surface that imitates wood. Facing the house with a block house made of a metal base is mainly used for arranging heat-insulating facades.

Advantages of a house block made of steel base:

these products have high mechanical strength. They are able to withstand various impacts, mechanical stress. Therefore, the outside will always have a beautiful appearance without deformation;
resistance to temperature changes;
simple installation;
the cost of these products is acceptable, unlike wood, they are much cheaper;
no need to carry out additional processing of the base;
moisture resistance;
fire resistance.

However, they have some negative qualities. Steel panels have an unattractive appearance compared to vinyl or wood panels. In addition, in hot weather, the lining becomes very hot.

How to choose

In order for the finishing of the block house to be of high quality, it is necessary to choose this material correctly. But choosing high-quality products is a rather difficult task, so during the choice it is worth considering a number of important qualities:

block house width. Facing outside is carried out with boards with a large width, its size must be at least 150 mm;
when choosing boards, it is worth considering their shapes, they should all be the same;
type of wood, the quality of siding depends on the type of wood. It is desirable to give preference to coniferous material. It has high strength, wear resistance;
appearance - inspect the products, they should have a smooth surface, without knots, cracks, pits. The drawing should be clear with bright color.

Different types of block house

Block house exterior finishing technology

The decoration of the outer facade of the building with a block house consists of a number of important processes.

Block house wall cladding technology

Training

Before you start covering the house with a block house, you need to prepare. The preparatory stage consists of several stages:

First, a vapor barrier should be installed on the facade of the house. As it can be used glassine or perforated film. This material is overlapped, fastened with aluminum tape;

Foil kraft paper for vapor barrier

before installing the block house, a crate is necessarily made. It should be performed from the base, which is treated with antiseptic agents. The beam is attached to the wall with nails or self-tapping screws;
Next, the insulation is installed. As it can be used fiberglass or mineral wool;
waterproofing is laid on top of the thermal insulation. It can be used as a waterproof film;
at the end, another crate is made for the house block.

Insulation laying

A second crate is installed on the thermal insulation

Block house installation

The block house installation process is carried out according to the following scheme:

boards should be installed from the bottom row, they must be laid only in a horizontal position;
everything is fastened with screws or nails;
to improve the strength of the entire structure, it is better to use two self-tapping screws for fastening. One self-tapping screw should be installed near the spike, and the other next to the groove;
it is better to lay the panels with the spike up, because moisture can accumulate in the grooves. It is advisable to leave a small gap between the boards vertically, horizontally, this will provide the necessary ventilation;
after that, all gaps must be treated with putty.

How to install correctly? See photos for detailed installation instructions. In the photo you can see in detail each stage of the installation of these products.

Types of fastening block house

Exterior care

In order for the lining of the house block to serve for a long time, it is necessary to properly care for it. And how to care for this material, you can learn from the following recommendations:

after installing the material, it must be treated with special primer mixtures, and after that, paint over with varnish, tinting agents;
after the varnish has dried, the surface must be sanded, then a couple of layers of varnish should be applied again;
it is worth updating the coating at least every 5 years;
it is imperative to install special gutters, because the material can eventually deform and change shape from water.

Block house decoration is the best for residential buildings. But still, before installing, you should carefully study the properties of the block house. And it is also necessary to know how to install it correctly, because its further service life depends on it. In addition, after installation, it is imperative to ensure proper care for this base so that it retains its original appearance for a long time.

Video

The technology of finishing the facade of the house with a block house.

Photo options for finishing facades with a block house

Examples of exterior decoration of buildings using a block house.