Lenovo service center. We enter "Safe Mode" through BIOS

Experienced PC users know about such Windows option as "Safe Mode". It is necessary in modern OS, because the latter are not at all sinless. Errors do happen, and sometimes it is impossible to correct them in working order. With XP and 7, everything was more or less clear. But with version 10, things got much more complicated. The standard entry to safe mode was disabled. Now this is not so easy to do. What caused this decision of the developers is not clear. But the fact is undeniable that the seventh version was much clearer than the newfangled "ten". However, in the days of XP, they said so. So, most likely, users will get used to this "miracle". So how do you enter Windows 10 Safe Mode? We'll talk to them about this.

What is Safe Mode?

Safe Mode is a way to boot the system with only the most important drivers. That is, only those components will be loaded that are necessary for the minimum system performance. No additional codecs, flash, or other unnecessary crap. This mode is used to fix operating system errors, return to an early state using system recovery. Also, some viruses can only be removed in this way. Therefore, everyone needs to know how to enter Safe Mode in Windows 10.

Sometimes this state of the OS is required to fix the "accounting" or local transformation. Naturally, to carry out this procedure, you need access to the Internet. And here the "Safe mode with loading network drivers" option will help. Users of the "dozens" need to choose this option, because they will not be able to fix their account without the Internet. And this again brings us back to the question of how to enter Safe Mode.

How do I enter if the OS starts up?

There are various options for loading tens in safe mode if everything works fine. The easiest one is to click on "Shutdown" with the "Shift" held in "Start". Then you will be prompted to choose the type of download. You just have to choose the one you need. Also try to "return" the start of the mode by pressing F8. You just need to write the desired text in the commander's line. How to enter Windows 10 Safe Mode via Command Prompt? More on this below.

There is another option. Enter "Parameters" and further - A lot of unnecessary text appears with the available options. Among others, there will be items "Restart computer in safe mode" and "Restart computer in safe mode with support for network drivers." We select the one that is needed at the moment and restart the PC or laptop.

You can also try this procedure. We go to "Start", select "Run", enter "msconfig" (without quotes). A dialog will appear with the "Download" tab. Among the fair amount of items there will be "Boot Options" and "Safe Mode" with a bunch of options. Here it also needs to be ticked off. And then just restart your PC.

Using the command line

Go to "Start", select the "Command line" item and enter the text in the commander: "bcdedit / set (default) bootmenupolicy legacy" (without quotes). Then we reboot the car and press F8. Windows start options window will appear. Here we select "Safe Mode". And whether you need network drivers - decide for yourself. This is one of the answers to the question of how to enter safe mode

Through the commander, a variety of problems are usually solved. But in the top ten it is best to use Windows Power Shell - a console borrowed from the Linux operating system. This tool allows you to execute commands as an administrator and works much faster than the standard commander. And it is clearer to those who have used "Ubuntu" or "Mint" at least once. The command line method works on any Microsoft operating system (except XP). The Redmond company did something adequate. Honor and praise to her!

What if the OS won't start?

There is only one way here. There is no way to run Windows in Safe Mode. Therefore, you need a USB flash drive with a distribution kit of "tens". When loading the installer, you can twist the feint with the commander and force Windows to boot from the HDD in safe mode. You just need to find the inscription "System Restore" in the welcome window of the installer. A commander will appear there, in which we enter the text already familiar to us (without quotes). Now restart your PC or laptop. This is one of the answers to the question of how to enter Windows 10 Safe Mode through BIOS.

Many people think that if the operating system doesn't want to work, then the easiest way is to reinstall the OS. On the one hand, this is so - a clean system always works faster. But on the other hand, frequent reinstallations of the operating system are sure death for a hard drive. Not to mention the fact that you need to kill a lot of time to fully configure the system. This is without taking into account the time to install it. Therefore, it is easier to solve all the problems that can be corrected using Safe Mode.

ASUS Laptops

There are some nuances here. The fact is that ASUS notebooks have a peculiar entrance to the boot menu (media selection at boot). Before performing actions with the commander in the tens installer, you need to force the laptop to boot from the drive with the distribution kit. To do this, just hold down Tab at startup and select the desired boot type. How to enter Windows 10 Safe Mode? ASUS is the same PC. That is, the method with the commander from the tens installer also works.

In general, Asus notebook manufacturers have their own concept of convenience and ergonomics. That is why engineers deviated from the standard canons and assigned some deranged keys for low-level laptop control. Therefore, before trying to change the BIOS settings, you need to read the instructions very carefully. Otherwise, your "correct and standard" actions can lead to very sad consequences.

Acer Laptops

The most problematic in this regard is the E5-731 laptop. In order to get into the boot menu of this laptop, you need to do a number of operations. First you need to press Enter to get into the BIOS of the laptop. Then move to the "Boot priority" tab and select our USB flash drive with the "tens" installer. Now, be sure to restart the device. The laptop will boot from the drive, not the HDD. How to enter Windows 10 Safe Mode in Acer E5-731? With the help of the commander in the installer. Exactly the same as in the previous examples.

With Acers, everything is somehow incomprehensible. This method of getting to drives with distributions was used in ancient system units with processors from AMD, and why manufacturers decided to choose this method is unknown. But in this situation, after manipulating the commander, you will have to return to the BIOS again and prioritize starting from the HDD. And this is completely inconvenient.

Lenovo Laptops

How to enter Windows 10 Safe Mode through the Lenovo laptop BIOS? It's easiest here. It is enough to press the F12 button when starting the device - and the media selection menu will appear. Select the USB stick and boot. And then we proceed according to the already known scenario with the command line and the required command. Laptops from Lenovo are the simplest in this regard. The Chinese company clearly knows a lot about ergonomics.

In general, Lenovo laptops are in no way inferior to more eminent brands in terms of quality and arrangement of controls. And in the case of Windows 10, they behave more adequately than other models. There's even an interesting Safe Mode option for those using UEFI. It is enough to hold down Delete at start - and launch options will appear. Why isn't it lovely?

Conclusion

Of course, getting into Safe Mode in Windows 7 was much easier. But even in the top ten, he has not gone anywhere. It's just that the developers made it less accessible. But with the help of certain commands or actions, it is quite possible to load the operating system in this mode. And then you can fix errors in drivers, the operating system itself and its components. The main thing is to do everything clearly according to the instructions. Then there will be no problem.

If none of the above methods helped to fix system errors, then there are at least two ways. The first is to reinstall the entire operating system. This advice is not devoid of common sense, since the fresh "Windows" always works better and faster. If you do not know how to install, or you do not have free time, then there is only one way out - to carry your laptop or PC to the professionals in the workshop. They will do everything quickly and painlessly. But it will cost money.

How to enter Windows 8 Safe Mode !?

Safe boot mode of the operating system is an option to load the minimum required number of functions and software.

When logging in from Safe Mode, a label is displayed in the corners of the screen.

This is used to diagnose system problems. The absence of a problem in Safe Mode allows essential services to be excluded from the expected cause.

Also, a large number of problems can be eliminated only from.

There are several possibilities to initiate the start of the system in this format. For this, both a simple keyboard shortcut and a bootable optical / flash drive are used.

Method # 1: Keyboard shortcut at boot time

This option is known to most confident users of early OS versions who know how to enter Safe Mode windows 8 while loading.

It consists of a few quick presses of "F8" before the system boots.

In some cases, you will need to use "Shift + F8". As a result, a screen with a list of boot options should appear.

Using the arrow buttons, select the "Safe Mode" item and confirm the selection with the "Enter" key.

In the latest version of the operating system, this option may not be compatible on all PCs.

If you cannot use the above combination of buttons, then you should take the following actions:

After these manipulations, loading can be done using hot keys.

The described method will help answer the question of how to enter windows 8 safe mode on an hp laptop.

Method # 2: OS Configuration Tool

To call the utility for setting the operating system parameters, you need to press "Win + R". This action will open a line of execution in which you need to write "msconfig".

After pressing "Enter" or "OK", the settings window will appear directly. In it you need to open the "Download" tab.

At the bottom of the window, in the Boot Options field, you must select the Safe Boot and Minimal items.

After agreeing with all the above settings, you will be prompted to reboot.

It can be confirmed or postponed. This will allow the computer to apply the settings after the first OS restart.

Note! The system will always boot in safe mode until the user deselects the boot options. After fixing the problems, it is important to remember to return the settings to normal.

Method number 3: Diagnostic tools

If you need to activate the buffer format of a running OS, then it is better to use the following method. To do this, you need the "Options" button on the sidebar.

Then you need to select "Shutdown" and, with the "Shift" button held down, click on the "Restart" item.

These actions will launch a diagnostic screen. On the "Select action" screen, click on "Diagnostics".

In the "Diagnostics" window, you will need to open "Advanced options".

On this screen, select the "Boot Options" item.

A list of conditions in which the OS will boot will be shown here. After familiarization with the parameters, you need to click the "Restart" button.

In the next step, the diagnostic program will provide several boot options. The selection is carried out using the "F1-F9" keys.

The fourth item is required in the list, that is, you need to press F4.

After these manipulations, the computer will boot in safe mode and you can perform the necessary actions.

Some users think: "how to enter windows 8 safe mode through BIOS?"

So this is impossible to do, because the BIOS is not associated with the OS.

If you have a significant computer problem, you may need to sign in through Safe Mode. If started correctly, this function will make it possible to boot a PC with a set of basic drivers - a mouse, monitor, keyboard, video adapter, disks. Also included are standard services to help keep the system running. Using this method, as a rule, it is possible to eliminate most of the malfunctions associated with computer work. Find out how to carry out this procedure correctly.

What is Windows Safe Mode

Safe Mode is inherently diagnostic and helps identify problems with device drivers. If you're having trouble starting up your PC normally, you should try turning it on with Basic Services. If the device works normally with such parameters, the essence of the failures should be looked for in the recently appeared additional elements. Such loading Windows allows you to remove software that interferes with the adequate functioning of a laptop or stationary PC.

If the computer is turned on immediately in safe mode, then there is a problem that prevents the operating system from starting. As a rule, this is influenced by the programs that you installed recently. To fix the problem, you can use the "System Restore" function, which you will find in the "Start" tab, "Control Panel".

How to boot windows 7 in safe mode: instructions

Two methods are used to launch in a safe mode, they differ from one another in principle. In the first version, the procedure occurs at boot time, and the installed Windows 7 does not start, so you can easily make changes to the operation of devices. In the second case, the inclusion of the basic set of services comes from the OS environment, which imposes some restrictions and will not make it possible to fully carry out repair procedures. However, both of these methods can solve some of the problems that arise during operation. Read more about them below.

Entering windows 7 safe mode at OS startup

If you encounter problems in the functioning of your PC, you need to know how to enter safe mode windows 7. If the device is turned on, click the "Restart" button in the "Start" tab. You need to switch to special mode when the computer is off. Before the icon appears, indicating that Windows is starting, you must click on the F8 key several times. Try not to miss the moment, otherwise the OS will start and you will have to reboot the device again. A window with the following connection parameters should appear on the screen:

• Safe mode. With it, you can start using a set of standard driver programs. Only those services are included that are required to start and operate the computer.
• With loading network drivers. You will need to choose this method if you want to use the Internet or connect via a local network.
• With command line support. The familiar desktop interface will not launch. Choosing this option causes the command line to appear instead.

In addition to the tabs described above, you will see other possibilities. For example, enabling boot logging creates a special file that records all the drivers that are in Autostart. This helps detect broken programs. VGA launch will help you set up the ideal monitor resolution. Choosing the last good configuration will allow you to restore windows with the settings that were at a healthy boot. The remaining options (Directory Service Restore, Debug) are for IT professionals.

Use the arrow keys to select the tab that best suits your task. After making the selection, press the Enter key on your keyboard. Then you can enter Windows and figure out the causes of the problems. Using this method, you will be able to restore the system by rolling back to the moment when the device was working normally, removing virus programs, broken drivers and much more.

Possible startup problems:

• A window starts, indicating that Windows is turned on. This can happen if you press F8 too slowly or not enough times. Repeat the procedure by restarting your computer.
• Disabled F1 to F12 buttons. If this happens, you need to know which key turns them on. Hold down the Fn button, and then press F8, and the device will boot.

How to get into safe mode from the OS environment

In some cases, a system login can be performed using the minimum number of services from the operating system environment. This method can help in solving many problems, although it is less popular. If windows crashes are too severe, enabling from the OS may not bring the desired results. How to get into the mode you need (safe) using the operating system:

• Find the Win key on your keyboard (it may have a Windows icon displayed when you turn it on). Hold it together with the R button.
• The command line will appear. Enter the following letters there without the quotes "k". Press the "OK" button.
• This will bring up the settings window. Among the tabs, open the section called "download".
• Select the required operating system. As a rule, most computers have one OS - in your case, windows 7, loaded by default.

• Below you will see a section called Boot Options. Select "Safe Mode", check the box next to "Minimum".
• Click "Apply", then "Ok".
• Then a small window will appear where you will see two tabs "Restart" and "Exit without rebooting". If you want to restart your computer now, select the first option. In the second case, the next time you turn on the PC, the device will start the basic set of programs.

What to do if Safe Mode does not start on a laptop

On some laptop models, there is an issue that prevents the device from turning on with minimal services. Then, after pressing F8 several times, the window in which you can select such a function does not appear, and the operating system starts to start. This may be due to the default keyboard shortcut, which involves holding down the Fn + F8 button at the same time. If this option does not work, the problem may be related to a broken keyboard.

When the operating system boots normally, you can enable the minimum set of services required for operation using the command line:

1. To do this, press "Win + R", enter the combination of letters "msconfig" without quotes. Click "Ok".
2. Then you can go to the tab where you need to select "Download", mark the desired OS.
3. In the Boot Options section below, look for Safe Mode and select Minimum. Finally, click "Apply", "Ok".
4. Select "Restart" or "Exit without restarting" if you need to start with a minimum set of programs later.

Video: how to enable safe mode on windows 7

If you have never entered Safe Mode using the operating system, then the first time you may not understand how to do it according to the instructions. Check out the step-by-step video below from an experienced PC user to help you resolve this issue and troubleshoot your issue. The video presenter explains in a few minutes how to enable the basic software suite effortlessly. The method is simple, even those people who have never encountered such a problem can cope with it. Watch a step-by-step video tutorial:

Sometimes you need to start a laptop in safe mode on windows 7, windows 8, whist or XP. The differences are only in the eight, the rest are almost the same.

To enable safe mode on samsung (samsung), asus (asus), acer, hp, sony xperia, lenovo, sony vaio, msi or Packard bell laptops, you can use one of the three methods provided below.

Why three? Anything can happen - suddenly one does not work - try the second. In general, safe mode is the same as usual, only some services / programs on the laptop do not work.

I turn on Safe Mode on my laptop mainly to disable (uninstall) antivirus applications and non-removable programs.

First way to start laptop in safe mode on windows 7

To download, go, open, call, install, get, transfer, select, restart or switch to safe mode, click the restart option and immediately after turning on (there is no Windows logo yet) click the f8 button.

In rare cases, you may need to press another key: from f1 to f12. Then you have to experiment or go straight to the second method.

Running Windows in Safe Mode: Method Two

You can start safe mode in Windows (I am writing about windows 7) through the "control panel" by clicking "administration" by clicking on "system configuration" and moving to the download tab, and that just put a tick in the appropriate place (see the picture below).

You can do another way by using the "msconfig" utility. Paste it into your laptop search (without quotes). It will appear at the very top - click once, and then do as described above.

The third way to enable safe mode on a laptop on win 7

This method is for the lazy - just force the laptop to quit. For example: remove the battery and disconnect the mains.

It could be easier. Press and hold for a few seconds (until everything goes out) the shutdown button.

Then just turn it on and you will see a menu for 30 seconds in which you can select various ways to start the laptop - the very first one on the list is the one you need.

That's all, I think one of the three options will definitely suit you. Successful problem solving.

Categories: Uncategorized

Safe Mode in Windows 10 is necessary for debugging and troubleshooting the operating system and software: driver problems, to remove viruses, troubleshoot errors, etc. In Safe Mode, only standard programs and drivers are loaded with the system. to operate the system in a safe mode.

In Windows 7, to enter safe mode, at the very beginning of the system boot, you need to press the "F8" key. This method does not work in Windows 10. According to Microsoft representatives, starting with the Windows 8 operating system, the use of the "F8" key was disabled to speed up the computer startup, because this key did not have time to work.

How to enter Windows 10 Safe Mode? You can start Safe Mode in Windows 10 using other methods. In this article, I will share four of the easiest ways to enter Windows 10 Safe Mode (there are other more advanced ways).

Three ways to boot Windows 10 in safe mode, you can use in a working operating system, and the fourth method will help in the case when the Windows operating system does not boot on the computer at all.

How to boot into Windows 10 Safe Mode

The first method is to enter Safe Mode using a system tool that works in Windows 7, Windows 8, Windows 8.1, Windows 10 operating systems.

Press "Win" + "R" on the keyboard. In the "Run" window enter: "msconfig" (without quotes), and then click on the "OK" button.

In the System Configuration window, click the Boot tab. At the bottom of the window, activate the "Safe Mode" item. By default, the minimum load is selected. Therefore, if in safe mode you need network connections, check the "Network" box to load network drivers.

After that, the Windows 10 operating system will start in safe mode. Before exiting safe mode, enter Computer Configuration using the method described above to disable safe mode.

How to enable Safe Mode in Windows 10

The second method is suitable for users of operating systems Windows 10, Windows 8.1, Windows 8. In the boot menu, which opens before starting Windows 10, a new item "Safe Mode" will be added (or something like that, at your discretion).

Right click on the Start menu. In the menu that opens, click on the "Command line (administrator)" item. In the command line interpreter, enter the command:

Bcdedit / copy (current) / d "Safe Mode"

This text must be entered with spaces where present, quotation marks from the English keyboard layout. After entering the first quotes, switch to the Russian keyboard layout, enter the text: "Safe Mode" (or something similar), then switch to the English keyboard, enter the second quotes.

After that, simultaneously press the "Win" + "R" keys on the keyboard. In the "Run" window enter: "msconfig", click on the "OK" button

In the "System Configuration" window, in the "Boot" tab, you will see that a new entry "Safe Mode" has appeared among the list of operating systems. Here you can choose the minimum boot of safe mode, or boot from the network. In the "Timeout" field, you can change the display time of the boot menu. By default, the menu will be displayed for 30 seconds, you can select another period of time, for example, 10-15 seconds.

Before starting the operating system, the "Select operating system" window will open. This window offers a choice of two options: "Windows 10" and "Safe Mode". Use the arrows on your keyboard to highlight Safe Mode and then press the Enter button.

If you do not select anything in this window, then after a certain period of time, Windows 10 (Windows 8.1, Windows 8) will be launched.

This window will open before each start of the operating system.

To remove the system selection menu, enter "System Configuration", highlight "Safe Mode", and then click on the "Remove" button. After rebooting, Windows 10 will be loaded immediately.

Boot Windows 10 in Safe Mode

Method 3: Boot Safe Mode with a Custom Boot Option. Press and hold the "Shift" key on the keyboard, enter the "Start" menu, click on the "Shutdown" button, and then click on the "Restart" item in the context menu that opens.

This will open the Select Action window in Windows Recovery Environment (Windows RE). Click on "Troubleshoot".

In the Advanced Options window, select Boot Options.

In the "Boot Options" window, click on the "Restart" button.

In the next window, you will need to select one of the following safe mode options:

• Enable Safe Mode (F4).
• Enable safe mode loading network drivers (F5).
• Enable Safe Mode with Command Prompt (F6).

To select boot options, use the number keys, or the function keys "F4", "F5", "F6".

After selecting the appropriate mode, the Windows 10 operating system will start in safe mode.

Entering Windows 10 Safe Mode if the system won't boot

The previous methods work with a working operating system: first Windows 10 boots, and then it enters Safe Mode. If the operating system does not boot at all, then you can enable Safe Mode in Windows 10 using a bootable USB flash drive, or an installation DVD with an operating system image.

Boot on your computer from a bootable USB flash drive, or from a DVD disc. After that, the "Windows Installation" will start (do not be alarmed, we will not install the system).

Next, the "Select action" window will open (see image # 6 for the previous method above, the images are identical for both methods). Next, in the "Diagnostics" window (image # 7) click on "Additional parameters". In the "Advanced Options" window (image # 8) select "Command Prompt".

In the next window you will be asked to enter the password for the account. If you log into the system on your computer without entering a password, do not enter anything. Then click on the "Continue" button.

A command line interpreter window will open. Enter the following command at the command prompt:

Bcdedit / set (globalsettings) advancedoptions true

After entering the command, press the "Enter" key. Close the command prompt window after the operation is complete.

In the Select Action window, click Continue.

After restarting your computer, you will see the Boot Options window (see image # 10 above, for the previous method). Here, using the keyboard keys, you must select the appropriate item to boot the system in safe mode: "Enable safe mode", "Enable safe mode with loading network drivers", "Enable safe mode with command line support".

Each time you boot Windows, you will see the Boot Options window. To boot the system normally, you need to press the "Enter" key.

In order to remove the "System Settings" window every time Windows boots, you need to boot again from the bootable USB flash drive or DVD, and then select "System Restore" in the "Windows Setup" window. Alternatively, press and hold the "Shift" key, enter the "Start" menu, click on the "Shutdown" button, and then "Restart".

Bcdedit / deletevalue (globalsettings) advancedoptions

Close Command Prompt and then shut down your computer. Now after starting Windows, you will no longer see the Startup Options window.

Conclusions of the article

You can enter Windows 10 Safe Mode using the system tool. After adding an additional item to the boot menu, you can choose to boot into safe mode when Windows 10 starts. Using the special boot methods in the Windows RE recovery environment, you can start various options for Windows 10 safe mode. Using a bootable USB flash drive or installation DVD, you can boot Windows 10 in safe mode when the system won't boot.