How to hide wires from a TV. How to hide wires from the TV on the wall - simple solutions against non-standard ideas

A lanyard sticking out in plain sight can negate all the efforts of designers. Before you hang the TV on the wall, consider how to disguise the cable system so that the wires are not conspicuous. Let's consider different options for solving the problem.

Wires in grooves

When looking for a shelter for communications, ensure the integrity of the insulation, do not allow friction and bending of the cable. You can't just shove annoying wiring behind the cabinet - they don't joke with electricity.

Photo: Instagram yutnii_podokonnik

Designer Yves Béhar created The Frame (Samsung) TV, imitating paintings. The most prudent owners plan the wiring of cable networks in advance, marking out niches for grooves, in which wires laid in corrugations and fastened with staples will be placed. All communications are output to a common console with the required number of outputs, and at the end of the wiring of the networks, the grooves are plastered.

TV hidden in the floor mirror. A wall-mounted TV with built-in wiring is ideal for aesthetics, convenience and safety. Cobwebs of cables do not spoil the look of wall decoration, small children and pets cannot reach the wires. At the same time, there is no need to perforate the entire wall - the wires can be taken under the floors, moldings and door trims, fortunately, many manufacturers have already taken care of the release of skirting boards with removable top panels and recesses for cables.

Concealed wiring in the wall is the gold standard for aesthetics, safety and ergonomics.

Photo: Instagram studio_disage

One of the trends is to “hide” TV so that it is invisible when it is off (for example, disguising it as a mirror).

Wires behind the TV set and furniture

The apartment has already been renovated and there is no way to perform hidden wiring? Try hiding the wires behind the TV. The main thing is to choose the right bracket: if all the sockets fit at a distance to the edges of the TV receiver, the wires will not be visible. Mark with a chalk or pencil the places for the sockets, cut two parallel vertical strips for strobes with an angle grinder at intervals of 2-3 centimeters and hollow out the inner surface with a puncher to the desired depth. Next, drill the required number of holes for the sockets with diamond bits and start laying the wires.

The sockets are shifted to the side, making room for the bracket.

If this is the first time you are holding a construction tool in your hands, it is better not to tackle walls. Hide wires behind mirrors, shelves, wall sets, frames and decor items - vases, ottomans, curtains, dry bouquets and live plants, fixing the cable with electrical tape.

The built-in secret panel is a safe haven for cable systems.

Pencil case-transformer with a built-in TV receiver hides labyrinths of wires in the depths.

Photo: Instagram studio_disage

The modular TV stand serves as a shelter for wires and thousands of useful little things. Convertible furniture makes things much easier - it is enough to free up space at the location of the TV receiver, and all the cords will end up behind cabinets and shelves.

Photo: Instagram velikayavalensia

Carved TV frames are an elegant move. You can also choose a cute cabinet or hinged panel with a built-in cable niche, closed by a door or panel. The most radical solution is to install a TV from a centralized station: no wires - no problem!

Photo: Instagram albinadesign

The bench under the TV looks strange, but it masks the wiring well.

Wires in a cable duct

If it is impossible to remove the hanging wires out of sight, decorative cable channels will help to elegantly integrate communications into the environment. The range of offers is not limited to the same type of plastic boxes - look for conceptual models that turn cable networks into elements of themed decor. Wires in junction boxes lined with bricks are suitable for a stylish loft, and in high-tech apartments, cable channels in the form of thin pipes are often found. Fans of eco-style should pay attention to boxes upholstered with wood or MDF panels. The cable ducts are attached to the walls with dowels, glue nails or hidden screws.

Graphic wire patterns are a new take on wall decor. From long wires, they collect original author's compositions that support the theme and general mood of the interior. Before proceeding with the assembly, draw up a wiring diagram, then transfer the sketch to the surface of the working wall and measure the length of the main segments with a nylon thread. Drawings of wires in colored casings with curly overlays, continuing the wall painting, look very interesting.

A little imagination and decor - and the cable will turn into a blossoming tree! By combining different decorating techniques, you will transform the cable system into a spectacular installation that will look fresh and unusual. Feel free to experiment: the most unexpected solution will most likely be successful!

Quite often, homeowners think about the question of how to hide wires from different equipment. If they "show off" outside, then this will not add aesthetics to the interior. You can cope with such work on your own, for this you just need to prepare some tools and show your imagination. The manipulations will not take long.

Decorating TV wires

In some apartments and houses, you can often find a picture when whole lines of cables and wires go from equipment like a TV. However, they can be hidden in the wall, given some rules. Among them should be highlighted:

electrical wires should not have damage to the insulation;
it is better to place wires as far away from microwaves, refrigerators, washing machines and irons as possible;
it is important to prevent moisture and condensation from getting on the cables.

If you are also faced with the question of how to hide the wires, then it is best to place them in a cable channel, where low-current lines pass like the Internet, alarm and telephone wire. The wiring for the apartment must be made in one piece. Intersections are unacceptable, and factory-made signal splitters and splitters should be used during installation. There should be no twists in the wires, since they will not be able to create good shielding, which will negatively affect the signal quality.

Modern solution: using the box

Before hiding the wires, you should consider several solutions to this issue, among which the use of decorative boxes should be highlighted. They can be made of metal, plastic or composite materials. Such a device not only looks quite simple, but also meets fire standards.

There are also disadvantages of this solution, they consist in the high cost of products, the need for the master's skills, as well as the lack of recommendations for installation.

If you still do not know how to hide the wires, then you should not purchase the first box or cable channel that comes across, which suits you in appearance and cost. It is important to pay attention to the fittings, namely:

stubs;
transitions for corners;
tees;
peak elements.

This will not only simplify installation, but also make the box look attractive.

Laying the cable in the wall

Quite often, novice home craftsmen wonder how to hide the wires from the TV on the wall. If you lay them in a strobe, then this will become the most invisible and reliable way. Plasterboard is sometimes used as an alternative solution, but installation takes time and skill. It is best to use the slitting method, however, you can resort to it only if the cable laying is accompanied by repairs.

Using drywall sheets for decorating wires

Before that, you can consider several options for resolving this issue. Plasterboard sheets are one of them. For work, you will need to prepare:

wire;
electrical tape;
strong rope or thread;
small diameter nut.

The order of work

The distance between the screws will depend on the load on the plastic box. When working with drywall or a wooden wall, where the cable channel will be fixed, self-tapping screws are installed every 50 cm. With uneven walls, the fastening step decreases, which allows you to hide gaps and defects. Floor cable duct should not be fixed with too long self-tapping screws. For a secure fit, 40 mm fasteners will suffice. It is recommended to use a screwdriver with a Phillips bit for screwing in.

Decorating wires in a cable channel using dowel nails

If the cable duct is to be reinforced to a brick or concrete wall, which is quite common for modern houses and apartments, in this case you cannot do without a cable duct and dowel nails, which are also called quick installation. To carry out the work, you will need a hammer drill with a 6-mm drill.

To self-fix the cable box on a brick and concrete wall, you must perform a number of the following steps. 6-mm holes are drilled in the bottom of the cable channel, the distance between which will be 50 cm. The box is applied to the wall according to the marking, which will allow marking the attachment points that coincide with the holes in the cable channel. The holes must be drilled, only after the box can be installed in its place. With a hammer, nails are hammered.

Using "bedbugs" to install the cable channel

If it is necessary to install the cable channel into a metal surface, the thickness of which is 2 mm or less, use metal screws, also called bugs, to fix it. On sale you can also find a special gun, with which the cable channel is installed on concrete.

Original ideas for home: how to make computer wires invisible

You, too, can try to solve the question of how to hide the wires from the computer. There are several modern solutions for this. The first idea is to mask the cords under the table top. For this, clips are used, installed on self-tapping screws or reinforced with double-sided tape.

If you don't want to spoil the table at all, then you can hide the wires in an ordinary shoe box, but you can first decorate it by making a design that is close to the interior of the room. If you are wondering how to decoratively hide the wires, then for this purpose you can purchase a special decorative cover in which the extension cord is hidden. It can be attached to the desk top.

When the speaker cord gets in the way, it is usually hidden in a case that is fixed to the back of the table. Excess cords and charging can be removed using regular office supplies. Another ingenious idea is to run wires through a hose. This quite often helps to solve the question of how to hide the wires under the table in one shell, which will not spoil the interior so much.

Conclusion

The workplace can be made neat and aesthetically pleasing using one of the above methods. There is nothing difficult about this, the cords can simply be placed in a box or secured under a table. An additional advantage is that the cords will be reliably protected from children and pets.

1 Wires in grooves

Designer Yves Béhar created The Frame (Samsung) TV, imitating paintings. Photo: Instagram yutnii_podokonnik

The most prudent owners plan the wiring of cable networks in advance, marking out niches for strobes in which wires laid in corrugations and fastened with staples will be placed. All communications are output to a common console with the required number of outputs, and at the end of the wiring of the networks, the grooves are plastered.

TV hidden in the floor mirror. Photo: Instagram vsrede

A wall-mounted TV with built-in wiring is ideal for aesthetics, convenience and safety. Cobwebs of cables do not spoil the view, small children and pets cannot reach the wires. At the same time, there is no need to perforate the entire wall - the wires can be taken under the floors, moldings and door trims, fortunately, many manufacturers have already taken care of the release of skirting boards with removable top panels and recesses for cables.

2 Wires behind the TV set and furniture

It makes things much easier - it is enough to free up space at the location of the TV receiver, and all the cords will end up behind cabinets and shelves.

Carved TV frames are an elegant move. Photo: Instagram velikayavalensia

You can also choose a cute cabinet or hinged panel with a built-in cable niche, closed by a door or panel. The most radical solution is to install a TV from a centralized station: no wires - no problem!

The bench under the TV looks strange, but it masks the wiring well. Photo: Instagram albinadesign

3 Wires in the cable duct

Wires in junction boxes lined with bricks are suitable for, and in high-tech apartments, cable channels in the form of thin pipes are often found. Fans of eco-style should pay attention to boxes upholstered in wood or. The cable ducts are attached to the walls with dowels, glue nails or hidden screws.

The wires are disguised as a picture of photowall-paper. Photo: Instagram formulakomforta40

Wood cable channels can be made by hand. Take two planed boards and place the cables between them. You will get a kind of baguette that looks charming next to paintings or panels in the same unpretentious framework. You can achieve complete merging of the box with the wall decoration if you close the boards with an overlay with a suitable texture or paint them to match the wall.

4 Wires as an interior detail

Sometimes there is no better way to disguise questionable furnishings than to display them in a visible place.

Graphic wire patterns are a new take on wall decor. Photo: Instagram booklya_ya

From long wires, they collect original author's compositions that support the theme and general mood of the interior. Before proceeding with the assembly, draw up a wiring diagram, then transfer the sketch to the surface of the working wall and measure the length of the main segments with a nylon thread. Drawings from wires in colored casings with curly overlays, continuing the wall painting, look very interesting.

If the color design of the cables does not suit you, collect all the wiring in an extension cord - the choice of shades and textures will significantly expand.

Short wires are decorated with edging and overlays. The cable, decorated with an LED garland, brings intrigue to the atmosphere, and massive beads are strung on thin wires to create ethnic accents. In children's communication, they decorate with stickers and funny figures, and in a romantic girl's bedroom - with artificial flowers, lace and feathers. For fixing cables it is convenient to use ready-made plastic clamps - inconspicuous or curly.

A little imagination and decor - and the cable will turn into a blossoming tree! Photo: Instagram u.domashnii

By combining different decorating techniques, you will transform the cable system into a spectacular installation that will look fresh and unusual. Feel free to experiment: the most unexpected solution will most likely be successful!

Greetings to everyone who has dropped by our internet light. Our portal is connected with questions about electrical engineering, but we do not forget to periodically talk about things indirectly related to it, which, however, are no less important in our everyday life.

The choice of today's topic fell on the TV on the bracket, namely, how to hide the wires from the TV on the wall. At first glance, it may seem that the question is not so complicated, but even the most ardent skeptics, after reading the material, will discover something interesting and new. So, let's go!

We will start with the most obvious and will gradually move towards more interesting and original solutions.

Straight into the wall

Today, hidden wiring is more popular than ever, and in general, people try to hide from their eyes any communications that, in their opinion, spoil the appearance of the interior. The antenna wire for the TV was no exception, which very often has to be pulled through the entire apartment or house, since a high-quality video signal can be obtained, often, only by installing the receiver only in a certain place.

In solving this problem, floor skirting boards with cable channels are very helpful, which can hide most of the cable along its length. However, if the TV is hanging on the wall, the wire has to be taken out of the baseboard and directed towards it, and it is not difficult to guess that the whole picture immediately deteriorates.
Plus, do not forget that the television antenna wire is not the only cable that fits the TV. At a minimum, you will need to power the equipment from the electrical network, well, as a maximum, it will also include: Internet LAN cable (many modern TVs are already, in fact, a computer capable of connecting to the network); wires for transmitting video and audio signals from various DVD players, TV receivers, HI-FI acoustics, etc.
The picture begins to take shape and is completely terrifying, and sometimes the maximum that can be done is to reel everything in a heap with nylon ties, and at least somehow try to disguise all this disgrace.

Perhaps the most time-consuming and messy way to hide such a number of wires is to lay them in the grooves made in the wall during the repair. However, the method can be safely called the most accurate and technologically advanced, since the wires hidden in this way will not be gnawed by your cat, no one will accidentally hook their feet, plus everything will be displayed in a single console containing all the necessary outputs.

In this case, there is no need to gouge the entire wall in order to distribute all the wires around the room. It is enough to stretch them up to the same baseboard and hide everything else in it.

The big drawback of this approach is that it is applicable, it is only in rooms in which repair work is being carried out. If your walls are just finished and you do not want to touch them anytime soon, then scroll right to the next chapter, where alternative methods will be offered on how to hide the television antenna wire.

If you are ready to take drastic measures, then we stock up on tools and go ahead:

First of all, you need to accurately map out the location of the TV on the wall.
Next, it is determined which bracket you will use for mounting. This point is very important, because, despite the world standard VESA, which includes the most common mounting points, the brackets themselves can be of different shapes and sizes.

Advice! Not paying attention to this, you can end up with communications peeking out from behind the "carcass" of the TV, since the bracket is too massive, or it will interfere with switching.

It is advisable that the device was already in your hands, so that everything was measured out clearly.
Try on the bracket to the TV and measure the distance that remains to the edges - this is where we will place all the sockets.
We transfer measurements to the wall and begin to get dusty. The grinder cuts two vertical stripes a couple of centimeters deep, at a distance of 2-3 centimeters from each other.
Further, the inner part is hollowed out with a perforator to form a full-fledged groove.

Then, with the help of diamond crowns, a number of holes are made for the purchased TV outlet. Immediately see that this element contains all the necessary outputs and a sufficient number of power points to be enough to connect all the equipment.
Further actions are extremely simple. First, all the wires are placed in the grooves, which must first be fixed with plastic brackets so that they do not fall out and do not interfere with further plastering.
The ends of the wires are connected according to the scheme with the socket, and it is installed in its place.
All grooves are covered with gypsum plaster, after which the subsequent finishing is carried out.

Cable channel

A less elegant solution would be to use a cable channel, but not everything is so simple - this element can be made by yourself or you can find a non-standard store version, making it an integral part of the interior. Plus, do not forget that it will be much easier and faster to implement such an undertaking.

After examining the assortments of electrical goods stores and electronics trading, you can find the following types of cable channels:

The easiest option is PVC... We all saw them - this is an ordinary plastic box of white or other color, which has a removable lid that is held on by snaps. It is possible to successfully fit such a product into the interior only if it is combined with the environment in terms of color - it will merge with it or, on the contrary, will be brightly contrasting.

Quite a rarity - models from MDF that can be effectively combined with the environment.
Metallic options- more often it is aluminum, which is shown in one of the photos above. Such a product looks impressive enough to become part of some futuristic interior.

The structure of all models is very similar. They are attached directly to the wall using dowel screws, after which all connections, together with wires, are hidden under a decorative cover.

As already mentioned, in some cases it is advisable to make a box with your own hands. The quality of workmanship and the final appearance will depend entirely on your skill with the instrument, as well as the type of materials used in decorating the room.

The photo above shows a very simple and at the same time effective way of assembling such a box. It is made of planed boards, between which all the wires are laid. On top of them, you can place any decorative overlay, and paint the boards themselves in any shade to make them as inconspicuous as possible.

Special furniture

Furniture manufacturers also did not ignore the problem and offered their solutions to the buyer.

As you can see, the variety is very great, and there are enough non-standard furniture options. In part, they are not able to hide all communications and still require strobing, however, with this approach, there will be much less dirt, so you can resort to this method even in a renovated room, having done everything as carefully as possible.

Creative problem solving

Well, for dessert, we offer you several options that can not only be effective, but also allow you to decorate an additional room.

Decorating

A very interesting way out of the situation will be not to hide the wires from the TV on the wall, but to decorate them, that is, to make them part of the interior.

Here are some interesting examples:

There are a lot of decoration options, and even manufacturers offer their solutions. And if you have enough experience and imagination to create and implement your ideas, you can create a real masterpiece for mere pennies.

The simplest ways of artistic decoration will be the following options:

Parts of the wires can be placed behind furniture, attached to it from the back with tape or staples;
Install live plants under the TV;
Use a varnished snag;
Make a necklace out of wire by putting large beads on it;
Apply ready-made plastic clamps from the manufacturer;
And much more.

Decorative boxes

If the wires themselves do not bother you much, but the massive tees and extension cords "call out" your eyes, then the original solution to the issue will be to place them inside a decorative box, which you can make yourself, or purchase a ready-made version. By the way, instructions for assembling one of these solutions will be given in the video attached to the article.

Various devices are also very effective, allowing you to hide and fix the largest parts in inconspicuous places.

Here are some photos with similar solutions:

That, in principle, is all that we wanted to tell you about how you can hide or disguise the antenna wire for the TV and other cables. No need to put up with the given! Get down to business wisely, and the result will not keep you waiting!

Every person who loves order is trying to improve his home, making it as comfortable as possible for living and aesthetically beautiful. For many of us, our own apartment is not just a roof over our heads, but it is something more, it is our fortress and our nest. Home improvement is a very broad and interesting topic.

Today we decided to touch upon a topic that is quite sore for many - the problem of wires, or rather a large number of them. Despite the fact that scientific and technological progress has allowed us to transfer many devices to a wireless connection, nevertheless, the problem of a large number of wires for many of us is very relevant ..

How to hide wires on the wall, ceiling and floor?

If you have a cable running along the ceiling or wall, then it can be hidden in a decorative plastic box. The box, depending on the type of wall or ceiling, is mounted on self-tapping screws or on dowels, a cable is laid in the niche of the box and is closed from above with a fixing bar. This method is simple, and the most commonly used. But, nevertheless, instead of a cable, you will get a plastic box, which, of course, is better than a passing cable, but not an ideal solution.

So that your wires do not pass from the outside of the wall, floor and ceiling - we recommend that you initially hide them inside.

How to hide wires in the wall... When making repairs, there is nothing difficult to hide the wire in the wall, having a grinder and a hammer drill. With a grinder, make grooves along the entire line of the wire, and knock out the central part with a puncher, after which the grooves are ready. Laying the cable should also not be difficult, since the laid cable is immediately fixed with alabaster, which instantly solidifies. After laying the wire, using a cement mixture, you can close up the grooves with the laid cable. That's the whole procedure.

How to hide wires on the ceiling... You can also hide the wire in the ceiling, and this is even easier to do than into the wall. To do this, you can construct a decorative curly niche made of plasterboard, along the perimeter of the entire ceiling. In this niche, you can easily lay all the wires by pulling them with plastic ties into one line. In addition, for the aesthetic transformation of the ceiling, we recommend organizing lighting in this niche, it will significantly transform the room in the dark, creating beautiful relaxing lighting.

You can also hide the wire in the niche of the suspended ceiling, this option is even more practical, since the wires do not need to be laid along the walls, they can be laid as you like, even diagonally.

How to hide wires on the floor... An excellent option to hide the wire running across the floor is a plinth. For this, there are special skirting boards with a cable recess in the central part. You take out the central part of the skirting board, put the cable in this niche and then put the central part back - the most practical way.

If you want to hide the wire in the floor during repairs, there are several ways to do this. The first way is to knock out a groove in the floor with a puncher for laying the wire. Then thread the wire in the corrugation and place it in these grooves. After that, the grooves with the wire are filled with cement, and the issue is resolved.

It is much easier to lay the wire into the floor if you plan to use a cement screed. To do this, you need to lay the wire stretched in the corrugation on the floor surface, after which the cement mixture is applied to the floor, thereby hiding the stretched wire under you.

How to hide wires from a TV?

The best way to hide the wires coming from the TV is, as mentioned above, to run them through a special plastic decorative box. You can hang the TV on the wall, and in the place where the TV is mounted on the wall, bring out all the necessary wires, so that the wires will not be visible at all. Very often, the television cable is hidden in the baseboard or in the floor, we discussed these methods above.

How and where to hide the wires from the computer?

Well, the last, more global problem: where to hide the wires from the computer !? Wiring between devices and powering them is a problem for many computer users. The string of wires does not fit into the interior in any way, and besides, it gets confused underfoot. How and where to hide the wires?

First you need to turn to wireless technology. By installing a Wi-Fi router in the apartment and connecting the Wi-Fi modules to the devices, you can safely remove a couple of three wires that went from the router to devices that consume the Internet. Install a Wi-Fi access device in the corridor so that the cable of the Internet provider does not pull throughout the apartment. For devices that received the Internet via wires: a computer, a receiver, a TV, you can buy Wi-Fi modules (if there are none) and, by setting up a wireless connection, you additionally get rid of several wires stretching throughout the apartment. In the future, try to buy Wi-Fi enabled devices.

So that the wires do not lie on the floor, and there are no turns of them - buy wires of the required length, in which case they will be taut, thereby not lying on the floor in turns. The wires that lie under the table can be run along the bottom of the tabletop by attaching them with tape. Surplus wires can be hidden in special decorative wire boxes. Such boxes have a funny design and will harmoniously fit into any interior, and there is a wide selection of them on the Internet.

As in the other cases listed, all wires from the computer that go to remote devices can be pulled through the baseboard. A more complex solution is the construction of a raised floor for wiring. To do this, raise the space on which the computer is located by a few centimeters with the help of the constructed niche, in which all the wires will be hidden.