Pattern for a chair with a back. We sew a chair cover with our own hands

Sewing a chair cover with your own hands is not easy, but after being inspired by the ideas and watching the master classes, you can do it. With chair covers, the interior will acquire individual features, and the same covers will help create a single harmonious style, for example, when the chairs are of different colors and shapes, and of course, the covers will hide the old and unpresentable look of the chairs. You can buy chair covers, but you still have to look for the covers that are suitable for your chairs, so we will look at different options for covers.

How to sew a chair cover with your own hands

Before sewing a chair cover, you must take all measurements

Cover pattern for a chair with a square back

The easiest way is to sew a chair cover with a square back, more difficult with a rounded one, but more on that later. It is advisable to make a one-piece pattern, but if this is not possible, then sew from separate parts. Separate parts can be sewn on the chair itself by attaching the fabric with the right side to the chair. Then sew everything on a sewing machine, turn it right side out and put it on a chair.

In the figure below, the numbers indicate the parts that need to be cut out.

For parts No. 1,2 and 3, add 2.5 cm for allowances, and for parts No. 4, 5 and 6 - 2 cm for allowances on top and sides and 3 cm for allowance for the bottom edge. The sixth part must be folded in half in width and measure the middle of the back of the chair and add 9 cm to it. For a chair cover, one part No. 1, 2 and 5 and two parts No. 3, 4 and 6 are required.

After cutting, we begin work with the sixth part. We tuck 1.5 cm, and then another 5 and sew on a typewriter. Next, add the hemmed elements together and make a mark on the upper cut, as shown in the picture below.

Then we cut off the top of part 1 and the cut and grind them with their front sides. Do not forget about the allowance of 1.5 cm. We also grind parts 1 and 2. After we put the resulting part on the chair with the wrong side up, pin the side parts No. 3. It makes sense to sweep them right on the chair, then remove the future cover from the furniture and grind the elements along estimate. Then the part must be ironed.

With an allowance of 1.5 cm, we grind part 4 with short cuts of part No. 5. Next, we cut off the resulting frill with a side cut of one wedge, 3 sides of the seat and a side cut of the second wedge facing each other. With an allowance of 1.5 cm, we grind the resulting seams. We turn the cover on the front side, straighten the corners and iron.

Drawstring cover

An interesting version of the chair cover, sewn like the first option, only an additional insert of fabric is made on the back of the back and ribbons are sewn on.

How to make a fabric insert

Another idea - a chair cover with beads

Pattern of chair covers with skirts - fabric consumption

Chair cover with elastic band- pattern under the photo

A simple pattern for a chair cover

An easy way to make a pattern for a chair cover:

How to sew a chair cover video master class:

How to sew a chair cover with your own hands

Cover pattern for a chair with a rounded back

How to sew an office chair cover

Cover pattern for an office chair. Since there are many curves on the office chair, it is more convenient and faster to make a pattern right on the chair.

Lay the fabric on the chair and fix it with adhesive tape, as shown in the photo

Outline all the folds

Don't forget the seam allowances

Sometimes the owners are very tired of old chairs, and they want to update something in them. For this purpose, you can create a textile version of the covers.

With the help of covers it is easy to change the appearance of the chairs and the entire accompanying interior. New paints of various colors will be added to it.

Covers for chairs will help to give the kitchen coziness, chic and originality. Due to the richness of patterns for covers, they can also be used for a dining room, nursery, guest room, hallway.

This design option for chairs can be successfully used to create a high-quality interior in a restaurant or cafe.

With it, it is easier to organize a themed banquet or party. Since the covers give the chairs the necessary touch of solemnity and style.

But the decorative orientation of their use is not the only one, since the covers can play a role in protecting the chair from various contaminants and subsequent rapid wear.

Sometimes there are surprises that leave marks on the chairs. Children are often not distinguished by accuracy, and pets even more so.

The covers are very advantageous as they can be easily removed for cleaning or washing. If one of them completely deteriorates, it will be possible to prepare a new one to replace it.

What is the difference between covers and various chair covers

They differ in purpose, texture and form. There are quite strict options, beautiful, very simple or very unusual. For any chair, you can choose a cover that suits him.

For example, the same children's chair used for feeding a baby can be decorated with a cover based on a bright print or nice embroidery.

And a chair created on a wooden base can be decorated with a cape that matches the color. Even a fishing chair can be designed in an unusual way.

Although designers believe that it is easiest to decorate the option with a high version of the back. Covers are everyday or festive.

Purpose of application

Everyday versions are created for everyday use. They will have to be washed frequently, so it is best to sew from denser versions of the fabric.

They should have perfect functionality so that they are easy to put on or take off.

Festive options will rarely be used, as they are only needed for special occasions. They can be decorated with a large number of decorative elements.

In this case, you can allow a creative approach to creating such a cover with your own hands.

Covers are divided into groups according to their shape.

The designers decided to distinguish three groups of cases according to their shape. The one-piece version is able to cover the entire chair even with the legs. This version is considered the most versatile, since its functionality allows it to be used for different purposes.

With this option, you can ensure an infusion into any interior and hide the shortcomings of the chair.

However, they are quite difficult to sew, which is considered the main disadvantage of this choice. In addition, they will require a lot more fabric compared to other versions of the forms of covers.

Covers to cover the back and seating area are usually suitable for domestic use. Separate cover options for the back and seat can be provided.

Usually the seat is more exposed to various troubles than the back. Because of this, the seat cover will have to be washed more often than the version for the back.

This version is suitable for providing an informal atmosphere in the summer kitchen or garden version of the gazebo. And also it is very good for a child's room.

Chair back covers. In principle, they are indirectly classified as covers, since for the most part they are used during various celebrations.

They are fairly easy to create and don't require too much fabric. With their help, you can ensure the quality of the celebration of the New Year or birthday, any children's holidays.

Which option to choose

Covers can be bought, however, it is much more interesting to create them yourself. To sew one cover, you will have to spend about 1-2 meters of fabric.

If there are no sewing skills, then you can turn to professionals who are ready to create a unique version of the cover. They will be happy to create the necessary product, having listened to the wishes of the customer.

DIY photo of chair covers

To turn an ordinary chair into an original piece of decor, it is not necessary to restore it. DIY chair covers are a great option with which you can avoid a lot of hassle. As you know, chairs serve a long life, but their appearance sometimes leaves much to be desired. Knowing how to sew beautiful covers, you can quickly ennoble the interior of your home, and in addition save money.

Before you start figuring out how to sew chair covers with your own hands, you should take your measurements correctly. Everything is sewn quite simply, if you follow the instructions clearly. Measurements start from the height of the chair. Not necessarily the cape will be to the floor, you can adjust its length yourself. Next, you need to measure the length and width of the back of the chair, the same is done with the seat.

How to take measurements from a chair

How to start making patterns?

The pattern of the cover is done in just a few minutes. There are a sufficient number of photos and videos on the Internet, as well as step-by-step recommendations for the work. The standard chair cover consists of three parts:

back - bends in half and goes around the chair, if desired, you can insert foam rubber or synthetic winterizer between the fabric;
seat - a synthetic winterizer must be placed under it;
ruffle - made of any length, to hide the legs of the chair.

Pattern for a cover by size

Patterns of covers for chairs can be pre-made from graph paper. This will allow you to roughly imagine the future version of the cape and will not let you spoil the material if you do not have experience yet. Covers for chairs are made quite quickly and the finished version can be seen in a few hours.

Work process

Knowing how to sew a chair cover, you can not only decorate the house, but also please your loved ones with an original gift. You can also decorate the room in this way in an original way for any event, because chairs with a back are almost always an integral part of the interior.

1. Taking measurements

Patterns of covers should be with a small allowance, for the necessary folds. If you decide to use a synthetic winterizer, then on the basis of the patterns you need to cut it out as well, just make it a little smaller so that it does not interfere with the sewing process. Sewing chair covers at home with your own hands is an affordable way to change the decor of your home.

Further, the patterns of the chair are well smoothed out to avoid irregularities in the sewing process. How to make a soft lining? Everything is very simple! The patterns are folded face to face, then a synthetic winterizer is applied to the wrong side and carefully stitched. Sewing chair covers should start with hand ties, for convenience when working with a sewing machine. Sew all the details with your hands first, and then try on what you are making a cape on, and this can be: a computer chair, a high chair or a cover for a high chair.

The remaining side will have to be sewn on the front side, but this seam will not be too visible on the product, because it will be closed with a high chair detail. A do-it-yourself chair cover pattern will come in handy for a long time, so do not immediately throw it away. Chair covers are in great demand among holiday organizers, and some housewives even open their own small business in which they offer to make such beauty.

The lower ruffle is sewn from below to the seat. A chair cover with such a cape looks more aristocratic and therefore it is better not to make it too short. Moreover, it can better hide the unsightly parts of the stool. You can also decorate it with a ruler of lace or put small bows around the edges. This option will be a wonderful gift for a children's room, little princesses will especially appreciate such a masterpiece. Knowing how to sew a chair cover with your own hands, you can constantly change the interior of your home.

2. Start with percale. You need to straighten the percale from the center to the periphery, pinning the pins every 5-8 cm. 3. Having tightly fitted the entire chair, cut off the excess fabric, leaving about 2.5 cm of seam allowance along the edges and on the seat. 4. If there is a hole between the seat and back, slip the percale in there and make a fold.
5. If the front line of the seat of the chair is convex, make recesses at the corners. 6. Pin the darts and check how correct they are. Sew them on the main fabric. 7. To make a skirt pattern, measure the front and sides of the seat. Cut and join pieces of percale to desired length and width.
8. If the back of the chair is too thick, you will need a special insert that connects the front and back panels of the back. 9. Lay another strip over the back of the chair. Finally, cut and fold the back panel equal to the length of the skirt.

Other types of capes

Don't stop there. You can also decorate a stool, if only there was a desire. Those women who know how to use a sewing machine should definitely use their skills. If you have experience in knitting, then you can easily make hand-knitted covers for chairs. It may take a little longer, but the result will be just amazing.

There are the following types of covers that you can sew with your own hands:

tightly seated;
freely seated;
cape.

Tight-fitting chair cover Loose-fitting chair cover Chair covers

Each is good in its own way. For example, it is very convenient to feed children in tight-fitting ones, because they do not ride, and the baby will sit without moving. Loose-fitting ones are sewn in order to be easy to wash. Capes help to quickly decorate a room, because they do not take much time to create. Step-by-step actions will help to achieve the most beautiful result.

For the best result, we sew covers that match the wallpaper or curtains. This will help achieve maximum harmony. For decoration, you can use bows, lace, buttons and so on. Some sew pockets on capes in order to throw small accessories somewhere. This option is great for the kitchen. It is not necessary to do everything according to a template, you can use your imagination, and then you will like your work even more.

Why is it better to sew rather than buy?

The main argument should be that independent work will significantly save money. But this is not the only reason why many women take up work. Thus, you can open up in a new area, show your abilities and surprise relatives and friends. Concentrating on sewing will help get rid of bad thoughts and get out of depression.

Sometimes it is not possible to choose the perfect covers for your interior, since the choice in the store is not always so large. On your own, you can make exactly such an interior that was thought out in your head. Yes, and handicrafts, as you know, are now very much appreciated, and perhaps one of your friends will want to contact you for a quick course in sewing and home decorating.

The uniqueness of each house depends on the little things. The atmosphere of comfort is largely created by textiles, for example, capes on chairs or covers. They not only transform the interior, allowing you to quickly change the situation, but also protect the furniture upholstery. If you know how to sew a chair cover yourself, you can not only save money, but also add something new to the existing design every time. These items are easy to remove and wash.

Recently, it has become fashionable to sew chair covers with your own hands. So you can update the interior with the help of capes and other elements. This not only gives originality, but also allows you to change the situation in the apartment without buying new furniture. Making chair covers with your own hands, you can experiment with the style of the room at least every month. Such covers allow you to decorate the house for a holiday or a special occasion, they are used even in expensive restaurants and cafes.

In addition to the ease and simplicity of sewing chair covers, this way to change the interior has several advantages:

it is cheaper than buying new furniture or reupholstering it;
capes protect expensive upholstery from pet claws and hair;
Covers for furniture allow it to always remain clean.

The simplest case in shape is one-piece. The fabric consumption for it will be more than for others, but it has many advantages. First of all, such a cape hides the chair completely. You can choose the height of the skirt to the middle of the legs or to the floor. This will hide the flaws of the furniture. For the pattern, you need to measure the height of the backrest, the chair itself, the width and depth of the seat.

DIY chair covers can have several varieties:

Universal - fixed at the back with ties or clasps. They can hide the chair entirely, while sitting on it freely. There may be a cape on the back and seat in the form of one piece of fabric, which is fixed on the side with ties.
A half-cover is a product that does not completely cover the furniture. Usually it is fixed to the legs or corners of the chair with a braid or elastic band.
One-piece or separate covers. Capes are popular only on the seat. They are the easiest to sew, and require little fabric.
Beautiful luxury cases. They are often used in cafes during banquets. You can sew such a cover on a chair with your own hands and for a home holiday. It will require expensive fabric, various decorative elements.

Universal

half-case

Separated

Luxury cover

Building a pattern

It is easy to sew a chair cover on your own, the main thing is to choose a model and form the pattern correctly. There are no universal samples for this, since furniture designs are different. It is better to make blanks according to individual measurements. What is needed to make a pattern for a chair cover is a question that should be considered in more detail. Key recommendations:

First, measurements are taken. You need to measure not only the width, but also the depth of the seat, as well as the height of the back. It is important to know that for some models these parameters may be different front and rear. If a cape with a skirt is sewn, you need to measure the height of the chair itself, take into account the slope of its legs.
It is necessary to pay special attention to the shape of the corners of the furniture. They can be straight or round.
If the chair has an unusual shape, for example, with a round seat or curved back, the pattern can be made directly on it. Sometimes it is required to make separate parts so that the product exactly repeats the bends, for example, side inserts.
When cutting the fabric, be sure to make allowances for the seams. It is also important to consider that the material can shrink when washed, so it is better to sew a cover for the chair a little larger in size or wash the workpiece in advance.

Complex patterns for chairs with a back are recommended to be made from paper. It is applied to furniture, fixed with adhesive tape, and then cut. Such a pattern is accurate, it is easy to fit, change, improve it. Then the paper parts are applied to the selected material and cut out.

You can do the same with fabric. To do this, take cheap material or an old sheet. The fabric is applied to the chair, cut and sewn. At the same time, you can see how the finished product will look like, remove its shortcomings, and redo it if necessary. After that, the seams are ripped, and the trial version is used as a pattern.

Fabric choice

It is recommended to sew chair covers from inexpensive fabrics. They should be easy to wash, durable and wear-resistant. It is not recommended to make such capes from velvet, wool, velor or viscose. They will be impractical and expensive.

For one product, 1.5-2 meters is enough - this must be taken into account when purchasing the material. The required amount depends on the shape of the selected cover and on the size of the chair.

Typically, a standard canvas has a width of 150 cm. For chair covers with a back and a skirt, you will need from 130 to 150 cm, even with additional decorative elements. For ordinary capes, less material is needed, it depends on the size of the individual parts. When purchasing fabric, it is important to take into account seam allowances, the unusual shape of the legs or back, and the possibility of shrinkage.

The most commonly used fabrics for chair covers are:

synthetic canvas is a durable and practical material that goes well with any style of interior;
cotton fabric or jeans - they have attractive colors, are easy to wash, they are most often used to sew children's covers;
linen - ideal for the kitchen, as it is hypoallergenic, wear-resistant;
satin - looks beautiful, well suited for special occasions;
flock, lycra and other synthetic materials - stretch well, are practical, easy to care for.

In addition, sometimes it is not necessary to buy a new fabric. Products made from old jeans, plaids or even knitted sweaters look original and beautiful. Such capes on chairs create a cosiness and unique house atmosphere. Well they are suitable for interiors in country or loft style.

Synthetic canvas

cotton canvas

Jeans

Linen

Atlas

Flock

Lycra

Instruments

To sew covers, you need ordinary tools. To build a pattern, you will need tracing paper, newspaper, interlining or wrapping paper. You will also need adhesive tape, scissors, a pencil or marker, chalk, a ruler or a centimeter. To place the finished pattern on the fabric, it is recommended to attach it with tailor's pins or special clothespins. Scissors are best for fabric. In order not to process the seams, you can use zigzag.

To make a cape or cover, you will need fabric, threads of different colors, best reinforced. To make the product soft, you can use a synthetic winterizer, holofiber or other filler. Sometimes an old blanket is put in the middle.

They use a sewing machine to work. Now different models are produced for both craftswomen and beginners. Some have a stitching feature. If it is not there, the products can be overcast by hand or tucked and stitched. Otherwise, the threads will fray, which will affect the durability of the covers.

Master class on sewing various models

Not all housewives know how to sew a cover on a chair. But such decor elements have become popular, so many people want to learn how to decorate the interior with their own hands. Step-by-step instructions will help you do everything right. It must be remembered that there are so many options for furniture models that only approximate advice can be given in it. In each case, you will have to adjust the pattern to the individual shape of the chair.

Simple one-piece case

The most difficult thing is to sew a cover on a chair with a back. Such products are suitable for any room and completely cover the furniture, hiding its flaws and transforming the interior. Sewing master class:

First you need to choose the right fabric, depending on where the cape will be used. For one chair you will need 1.5-2 m.
Take measurements from furniture. Make a pattern on paper or cheap fabric.
Transfer the workpiece to the selected material. In this case, be sure to make allowances for the seams and take into account the bends of the structure.
Sew the details on the sewing machine. If desired, attach foam rubber or other soft material to the seat from the wrong side.
Process the seams and decorate the cape.

Periodically, the product must be tried on in order to correct the error in time.

Baby chair cover

To sew a beautiful cover for a high chair for a child, you need to show imagination. You can decorate it with a large application in the shape of an animal's muzzle, make it in the form of a fairy-tale house or a doll's room. In any case, it is important to choose a natural material so that it does not cause allergies and is easy to wash. The colors should be bright and beautiful.

It is advisable to make several capes on a highchair for feeding, as they quickly get dirty. Sewing them is easy. Stages of work:

Prepare two pieces of fabric - for the front and lining. A synthetic winterizer or other soft filler is also useful. For the front part, it is better to take a bright material, but so that it is easily erased.
If there is an old cape left, outline it on the fabric. If not, make a pattern using newspaper or tracing paper.
Break out the details. It is advisable to immediately outline the places for belts and ties.
Fold the components right side up and sew. So that the synthetic winterizer does not slip and does not fall off, it is better to quilt the cape.
With the help of an oblique inlay, process the edges of the product.
Overcast the cut holes for the belts by hand or on a typewriter.
Sew on ties to attach the cape to the chair.

Make a pattern and draw

Cut out the lining

Fold the short side

Sew the workpiece to the main fabric

Cut

Put a synthetic winterizer on the workpiece, sweep and cut

Turn out, process the edges of the product

Sweep holes for belts

Sew on ties

Put on a chair cover

Elasticated seat for round stool

It seems that it is easy to sew an ordinary seat on a stool, but it is not. It is quite difficult to make a cover for a round kitchen chair. Its features are that you need to sew an elastic band around the edge so that it holds the product. It is also recommended to make a lining. The advantage of this option is that it will require quite a bit of fabric: according to the size of the seat, plus 5-10 cm for the collar and elastic band.

Instructions for creating a cape for a round stool.

Measure the product diameter.
Make a pattern on paper. You can attach it to a chair and outline.
Cut out the fabric, not forgetting to make an allowance for the collar.
Put an elastic band on the edge, tuck and sew.

The product must be constantly rotated when sewing so that the seam is round.

Measure the diameter of the chair

Make a pattern with an allowance for the collar

Cutting the fabric

Lay the elastic, tuck and sew

Finished case

Festive cover with a skirt

Such capes are usually made solid, they cover the chair entirely to the floor. For this, an element such as a "skirt" is used. To make the cover really festive and decorate the interior, and not spoil it, you need to sew it correctly. Making recommendations:

Measurements must be accurate, taking into account the shape of the chair. No seam allowances are made at this stage.
Create a sketch of a pattern on tracing paper. Inexperienced craftswomen can make it from a newspaper right on a chair.
Before cutting the fabric, you need to try on the pattern on the chair and, if necessary, correct the mistakes.
When cutting, be aware of allowances for seams and for creating folds.
All the details are sewn with a machine: first the side seams of the product, then the back with the seat, only at the end the skirt, forming folds.

Take stool measurements

Draw a sketch of the cover

draw patterns

Cut out the back and seat from the synthetic winterizer

Cut out the details of the seat and back from the main fabric

Fold down the layers of the seat

Fold the back, sew in a synthetic winterizer and stitch

Cut fabric for ruffles

Form folds

Cut from the main fabric of the tie

Sew on ties

Put a chair cover on

decoration

Beautiful and original do-it-yourself chair covers are obtained even without much effort. You just need to show a little imagination. To create a cozy interior, you can use a variety of color combinations, beautiful appliqués, patchwork sewing.

Various decorative elements are also used, zippers, bows, ties are especially popular. They are needed so that the cape does not fidget and does not slip. After all, if you sew it exactly to the size of the chair, it will not fit, so it is recommended to make it larger. You can also use zippers on the side of the back, ties or fasteners with large buttons at the back.

In addition, do-it-yourself chair covers are often decorated with other elements:

ruffles or flounces;
satin ribbons;
brooches, artificial flowers;
rhinestones, lurex.

When using such decorative elements, it must be taken into account that the cover will often have to be washed. This product is subject to severe abuse, especially if it is intended for the kitchen or children's room. In addition, a large number of decorative elements can make sitting on it uncomfortable.

Most often, do-it-yourself chair covers are sewn into the kitchen. They help keep the room clean, create comfort and good mood. If you wish, you can update the interior throughout the house. Homemade covers look appropriate in any room, suitable for various styles. The main thing is to choose the type of fabric, color and model of such a product.

Video

A photo

The desire to beautifully and effectively transform the design of the room and its interior appears in every needlewoman, but not every one of them wants to make any drastic changes, resort to large-scale repairs. One of the simplest, but at the same time effective ways to logically finish the interior or emphasize it will be the tailoring of original covers for chairs and stools.

Such design elements can not only please the eye and give old furniture a new life, but also protect it from various kinds of pollution and pests. To discover this practice, it is recommended to read it in its entirety. This material will tell you how to sew a cover on a chair, a nozzle on a stool, patterns for chair covers will be shown, what fabric to choose for this and what features the sewing process implies.

The cover is able to return the popularity of the old chair

Benefits of making your own chair covers

Firstly, the covers, which were created by oneself, not only meet all the style preferences of the hostess, but are also made to last, from high-quality material. Chairs with backs and stools in protective covers do not lose any of their practical properties, but acquire new characteristics: beauty, elegance. Removable upholstery protects furniture from premature aging, abrasion.

Simple cover for kitchen chairs

In the process of sewing, you can determine how well this or that fabric fits the seat, how it sits and stays on it. It is impossible to check this when buying store products.

Important! If the cover is sewn with your own hands, it will be of high quality and will cost a minimum of money or almost free if fabrics from old things were used for sewing.

Homemade stool covers

The advantages of making "upholstery" with your own hands are obvious:

The seats will be original and will fit perfectly into the interior of the room, if you meet some requirements;
Furniture that has been improved by "cladding" will become more comfortable and "live" longer due to security;
It will take little material and money to manufacture, and the appearance of the furniture will change dramatically;
Removable covers can be easily removed and washed if they get dirty.

Covers not only protect furniture, but also complement the interior

How to choose a style

Chair decoration is classified according to several factors: style, which includes the form and function of the products, as well as the material for manufacture. The latter will be discussed in detail in the next section.

Depending on the shape of the products, they are divided into several categories:

Solid, which fully cover the furniture from external influences. They cover not only the seat, but also the back and legs. They have a strong fixation, which helps to radically change the design of furniture and hide its flaws;

The one-piece cover that has already become a traditional option for chairs with a back

Separate, which will include separate covers for the back and seat. Due to this, specific advantages appear: ease of care, since you can easily remove part of the decor and wash it, practicality.

Separate elements are practical and original

Only sitting. It covers only the seat and the lower part of the chairs. This option is the most practical and requires little time and economic costs.

The cape on the seat reliably protects it from abrasion

The choice of style also comes from the purpose and functions of the covers, based on which they are divided into:

Everyday accessories used daily. It is worth remembering that such covers, due to the constant load, should be washed more often. To do this, when choosing a material for them, they rely on a dense and highly resistant fabric that is easy to clean;

Simple cape for everyday use

Solemn. They are designed for festive events and carry the main task - to decorate the design and cause the effect of "wow" among the guests, to focus on the table. They differ from ordinary ones in that they are made, as a rule, from expensive types of fabrics with various decorations in the form of bows, frills, ribbons and draperies.

Solemn covers effectively focus attention on themselves and the table

The choice of fabric for tailoring

Tailoring can be done from a variety of materials. It all depends on the final destination of the cover. For everyday use, you need a practical and inexpensive fabric, and for the holidays - a beautiful and elegant one. In addition, they take into account the room in which there are chairs, its purpose and its own interior.

Important! For everyday use, you should choose a wear-resistant material that can be removed and washed or knocked out at any time. One of the criteria also becomes the absence of electrification and absorption of pollution. Some of the best fabrics for tailoring are considered to be cotton fabrics, microfiber, linen or silk.

Stylish case in bright colors

Cotton fabrics

Among them, satin, calico, denim or twill are in priority. Their key advantage is that they keep their shape well, do not cause allergies in sensitive people and can withstand machine washing. Cotton fabrics are inexpensive and are produced in various shades, colors and patterns. They also have disadvantages: fast fading and getting wet.

Cotton covers

linen fabrics

These include matting, linen itself and canvas. They are environmentally friendly, highly durable, dirt-repellent and can be subjected to enhanced machine washing and intensive use. Linen also does not absorb dirt well, it is hypoallergenic and easy to care for. Rough, minimally finished linen fabrics are perfect for a daily slipcover. The disadvantages are: the complexity of cleaning and ironing, rough texture. Linen covers are suitable for everyday use in country or ethnic style rooms.

Linen fabric looks practical but beautiful

Flock and microfiber

These materials are new generation materials. Their main advantages were:

wear resistance;
attractiveness;
Lack of creasing;
No deformation when washed.

Important! Despite this, microfiber and flock should not be heat treated: dried on a radiator and ironed. This is not necessary in the absence of creasing.

Microfiber upholstery for chair

Silk

Silk fabrics include: brocade, satin, crepe satin. Their advantages are that they are durable, noble and resilient. Silk fabrics make it possible to collect spectacular folds and draperies. There are also disadvantages: high price, demanding care and washing, gentle ironing. Such canvases are suitable for creating festive covers in classical and neoclassical, Indian and Arabic styles.

Silk covers are able to emphasize the solemnity of the event

How to take measurements and make a pattern?

The first thing to do when sewing is to take measurements from the furniture. The pattern directly depends on the design and dimensions of the chair or stool. To take measurements, they take material that holds its shape well and put it around the chair, securing everything with pins. At this stage, they take into account: how much the legs of the chair will be covered, whether there will be fasteners on the back, and so on.

Luxury and functionality combined in brocade

Measurements can also be taken using tracing paper. To do this, a layer of paper is first applied to the seat and secured with pins. After that, a stroke is made along the contour. For allowances, add one and a half centimeters on each side. Subsequently, the details are cut out. The back is measured in the same way if sewing is done for a chair.

For the front of the cape, the length of the legs and the width of the front edge of the product are measured. After that, a given rectangle is drawn on the tracing paper with the addition of 5 cm at the bottom and 10 cm on the sides. To all this, add an allowance of 1.5 cm for the seam of the upper edge.

Practical and stylish capes

In the same way, patterns are made for the sides of the "skirt". To the edge, which is adjacent to the outer part of the back, add 15 cm. The pattern is made in several copies. The measurement of the outer part of the back is done like this:

A large sheet of tracing paper is applied to it to the top of the back;
The edges of the outer side are marked;
Lines are drawn along the legs to the floor;
5 mi are added at the bottom and 1.5 cm for the allowance.

Semi-transparent cape on the back

Important! Centers are marked at the top and bottom of the patterns, along which the canvas is then folded and cut into two even parts.

Transferring the pattern to fabric

The drawing is done on tracing paper in the section above. After it is ready, it is transferred to the fabric, taking into account the position of the equity threads. Transfer can be done with pencils, remnants or chalk. It is worth recalling that the pattern is made in duplicate.

Case measurements

Step-by-step instructions on how to sew a cover for a chair with a back

You can order tailoring from the purchased fabric from the master, but it is much more profitable and more pleasant to make it yourself. The only caveat: all measurements must be accurate and take into account seam allowances and fabric shrinkage during washing. For this, one or one and a half centimeters should be enough.

Instructions for sewing a simple product

To get started, you need to prepare all the necessary materials and tools:

Threads and needles;
sewing machine;
Sticky tapes;
Scissors and awl.

Taking measurements from a standard chair

The step-by-step instructions for making are as follows:

Make a pattern on tracing paper or film that fits well on furniture to perform all measurements;
Cut a seat from a soft synthetic winterizer and make allowances of 1 cm from the edges and 3 cm at the back;
Attach the synthetic winterizer to the seat and measure the recesses for the legs at the back. Cut notches along the contour;
Determine the height of the cover and, leaving the bottom of the furniture open, measure the sides and back of the chair;

Case decorated with bows

Transfer the pattern to the selected material and cut it out, not forgetting to leave allowances for seams and shrinkage;
Round the corners on the sides for a better “seat” of the cover;
Sew all the pieces together on a sewing machine. Make notches on the rounded edges to avoid wrinkling of the fabric;
Sew decorative elements in the form of braid or beads around the perimeter of the seat;
Try on a chair cover;

Case for children, decorated with a flower

Features of baby chair covers

If the cover is made on a highchair, then it would be most correct to make it from hypoallergenic types of cotton fabric, which is durable and wear-resistant. This material is breathable and easy to wash. The fabric itself is quite cheap and it will not be a pity to throw out such a cover in case of damage to it by a small tomboy.

It is best to put on a water-repellent cover on the highchair, which will be washed without problems. Since all furniture has its own design, you will have to individually carry out all measurements on a chair or on a standard cover.

Stool seats wear out quickly without a cape

Tuck the unsewn side and stitch it in any way;
Mark the places where the seat belts should be located if necessary;
Decorate the product with bows, ruffles, ribbons or decals.

High chair mattress

Beautiful examples of cases

To expand the creative potential of the reader, below are options for beautiful and elegant covers that can restore the former glory of any furniture.

Bright fabric from unnecessary things can easily change the look of a simple bar stool.

Thus, the pattern for chair covers does not differ in any particular complexity. To make it and other stages of work is within the power of any, even a novice craftswoman. There are many classes of cover styles, they are divided into solemn and daily ones. Based on this, the material for manufacturing, the presence of decorative elements and other things are selected.