Oven cabinet formula. The cabinet for the oven and the hob - the stages of assembly of the simplest design Drawer for the oven dimensions

The built-in oven is very convenient. This device is an independent "player" in the kitchen and can be installed where it is impossible to put a classic oven combined with a hob.

An oven set is a very important part of a modern kitchen. An oven, a hob and a storage box for accessories are built in here. These cabinets have indents for ventilation of the device, which distinguishes them from conventional cabinets.

Interesting fact! The first built-in ovens appeared more than half a century ago. Now these devices are the best-selling devices in the world, despite the prevalence of classic models of ovens.

There are several types of cabinets for installing the oven:

Pencil cases. In this type of construction, ovens are built in at eye level, and spacious cabinets are installed below for storing various kitchen utensils.
Under the hob... Such devices are more like the classic version of ovens combined with stoves. They are less convenient than pencil cases, because you have to bend over constantly while cooking, which brings some discomfort. Also, there may be problems with cleaning the oven. But they have advantages in some situations. For example, in small kitchens it will be difficult to put a large cabinet for the oven. Also, this design is suitable for those who concentrate all items for cooking in one place.

Pros and cons of the design in the pencil case

Pencil cases have a number of conveniences: when preparing food, you do not have to bend over, it is easier to follow the cooking process. These headsets are useful for wearers with back problems. Of course, their scope is much wider than just a place for an oven. There you can install a multicooker, toaster or other kitchen appliances.

Since the ovens are at a height, it is important that the fastening is strong, because injuries can be caused if the structure collapses.

How to make a do-it-yourself cabinet for an oven

It's easy to make such a headset yourself. It is important to have basic knowledge and necessary materials. Self-service is cheaper and the procedure usually takes about three hours. Creation takes place in several stages:

Dimensions. Standard sizes of headsets: width - 60 centimeters, height - 85 centimeters. It is necessary to calculate in advance the size of the headset so that the width of the oven is 1–2 centimeters less;
Materials:

Plywood, thickness - 18 mm;
Materials for worktops with a thickness of about 30 mm;
Drawer guides;
Furniture supports (conventional, plastic);
Euro screws or confirmations, Self-tapping screws (3.5 x 16 mm);
Screwdriver, tape measure, pencil, ruler;

Drill 4 holes in the bottom, the indent on the right and left is -60 centimeters.

Assembly. Count 5 centimeters from the edges to the middle, attach the legs. Place the bottom with an edge, attaching the side parts (holes on the bottom are specially for this). Tighten tight so that the screw head does not protrude beyond the plywood. Then we attach the partition by screwing the configs through the side holes.

Prepare the box by installing the mating parts of the rail.

We move on to the next part of the design - installing the hob. First, in the worktop, determine the center where the hob will be installed. To do this, you need to additionally measure the outer part of the plate. After that, outline the dimensions of the future opening into which the inner part of the panel will be installed. Measure the inside.

It is important to make drawings five millimeters larger for free entry of the structure. Then drill a hole in the line. It is important that it does not go beyond the line. After that, the jigsaw blade is inserted and the opening is cut out.

Then you need to try to insert the hob into the opening. If necessary, carry out additional trimming. Then fix the device with the fasteners that come with the stove.

Ventilation

Good ventilation is essential for ovens to function properly. It is important to take care of this even before making the cabinet for the oven. For good ventilation, place the oven 60 mm from the wall of the headset, and the gaps on the side and bottom should be about 5 centimeters.

Some cabinets are designed with a special clearance between the back wall and the bottom for more efficient ventilation. It is important to take care of this in order to avoid damage to the furniture, as well as damage to the oven itself. Read the instructions for the oven carefully before constructing the cabinet.

conclusions

Ovens are a real miracle of technology. After built-in devices without a hob appeared in the world, people have the freedom to choose the location of this device. They are compact, they have more useful and interesting functions that will help you create culinary masterpieces.

Although for such ovens you need to purchase special kitchen sets, competently understanding this issue, we will be able not only to purchase comfortable and high-quality cabinets, but also to create them with our own hands, having the basic skill and the necessary materials.

Sketch of the body of the kitchen section, without facades.

In this section, 550 mm full extension telescopic guides are used as pull-out elements.

The edge is marked with a red line next to the size number. This means that this end of the part is front (visible) and must be faced with a furniture edge. If there are two lines, then this means that both ends of the part of the corresponding size are pasted over with an edge.

In the given detailing of the kitchen section (module), the dimensions are indicated without taking into account the thickness of the edge.

The thickness of furniture edges with a thickness of up to 0.6 mm is not necessary to take into account in the size of the part ... The size of the part will need to be reduced by the appropriate edge thickness if an edge such as ABS is 1 or 2 mm thick. For example: part width 400 mm, edge thickness 2 mm. it is necessary to paste over both ends of the part. Then the size of the width of the part must be adjusted taking into account the thickness of the edge. Those. you get 400 - 2 mm. - 2 mm. \u003d 396 mm.

	Name.	Dimension "X"	Size "U"	pCS.
1	Sidewall	704 \| \|	560 \|	2
2	Bottom.	600 \| \|	560	1
3	Communication - oven shelf.	568 \| \|	560	1

6	Drawer side.	550 \|	70	2
7	Front and back panels of the drawer.	510 \|	70	2
8	Drawer bottom, fiberboard.	550	541	1

Kitchen section with drawer and shelf. Assembly diagram.

Drawer assembly diagram:

Drawings of parts of the kitchen section with assembly holes.

1. General drawing for the left and right sidewalls.

3. Communication - oven shelf.

Built-in household appliances are increasingly seen in modern kitchens. And this is not surprising. Stoves and refrigerators, washing machines and dishwashers, microwave and UHF ovens integrated into the kitchen set allow you to save the work surface and use the interior of the cabinets more functionally. And, of course, they give a more holistic and harmonious look to the overall kitchen design. How to build an oven with your own hands? It is worth starting with the correct layout of the kitchen set.

With a competent approach in developing a kitchen design project, the location of a freestanding stove or a duet "oven + hob" is inextricably linked with the supply of the hood to the ventilation shaft. Therefore, even at the stage of the beginning of the repair, you can clearly determine the location of the oven. And, accordingly, provide sockets for connecting it.

However, not everything is clear here. It is impossible to locate the outlet strictly behind the oven. When the plug is included in it, a "dead" zone is formed, which will not allow the oven to slide in to the desired depth.

The option of placing the outlet below the level of the oven is also not very successful. It is much more convenient to first turn off the equipment, and only then remove it from the kitchen cabinet. And not vice versa - when the need arises to disconnect from the network, start pushing a rather heavy unit.

The most optimal solution is to move the outlet below the level of the table top into a nearby cabinet. Ideally, there are drawers in the adjacent cabinet near the oven. Then, in the cabinet itself, you can not install the back wall at all. It is enough to remove the required drawer - and access to the outlet is open.

It is also a good solution to screw an overhead socket to the side of a cabinet with hinged doors. It will not interfere with the internal filling of the cabinet, but it is quite convenient to use it.

The main thing is that this cabinet does not turn out to be a table under the sink. Such close proximity to water, sewer drain is undesirable.

Drawings of how to build an oven with your own hands

This task is not as difficult as it might seem at first glance. To facilitate installation, household appliances are produced in certain standard dimensions. You can always exchange one built-in oven for another without changing the kitchen furniture.

The standards here are simple: any electric or gas oven is built into a 600x600 mm niche. Moreover, the width of the niche is 600 mm, taking into account the thickness of the side walls of the module for the oven (according to the requirements of most models, the final size of the opening should be at least 560 mm).

The depth of the oven is designed to fit under a worktop with a standard width of 600 mm. That is, the body to the front overhang should be 550-560 mm. It will not work to build an oven with your own hands under a narrowed countertop. But under the extended, in various design variations, it is quite.

Nuances can arise in specific non-standard cases. Therefore, carefully study the instructions at the stage of purchasing household appliances. For some ovens, it is necessary to provide space for ventilation in the design of the box.

Or even a special cutout for air circulation in the bottom of the cabinet or countertop.

A typical design of a cabinet for an oven is shown in the drawing.

If the pedestal table is "clamped" between adjacent modules, then there is no need for the upper tightening bar. Many furniture makers do not install it at all.

If the height of the kitchen unit is standard (840-850 mm with different thicknesses of the worktop), then the height of the side of the cabinet for the oven will be 720 mm. By simple calculations (720-600) we get a space of 120 mm at the bottom of the installation. More precisely, the free space will be (120-32) only 88 mm, minus the thickness of the bottom and shelf.

A drawer with a box with a height of 50-60 mm is usually built into this space. If you increase the height of the lower row of the kitchen to match your height (you can read about this), then the drawer will be deeper and more functional.

Actually, according to the same principle, the cabinet "turns" into a cabinet for a built-in oven. We just increase the height of the space of the bottom drawer.

But there is one important nuance here. The depth of the sidewalls of the increased cabinet must also be increased so that the gap between the wall and the cabinet body is not visible.

This means that the air circulation near the oven built in this way will be disrupted with your own hands. It is not for nothing that a separate drawing is attached to the instructions for ovens for installation in a pencil case. In which you can see that you need to leave the drink under the air circulation.

Therefore, a cutout should be provided in the countertop covering such a low cabinet for a built-in oven with your own hands. It can be covered with a ventilation grill.

Do-it-yourself cabinet for the oven, drawings and calculations

Take, for example, the calculation of a cabinet for a built-in oven of standard sizes. Its drawing will look like this.

With a tabletop width of 600 mm, taking into account the overhang at the front and rear, the depth of the cabinet will vary between 460-500 mm.

If it is decided to place the tensioning bar in the center of the module, then it should be lowered by about 10 mm relative to the sidewalls. Otherwise, it will interfere with cutting the hob into the worktop above the oven with your own hands.

If the cabinet body is made of laminated chipboard 16 mm thick, then the calculation of the details will look like this.

№	Part name	length	width	qty
1	Bottom	600	500	1
2	A shelf	568	500	1
3	Sidewalls	704	500	2
4	The backdrop behind the drawers	88	568	1
5	Drawer side	450	60	2
6	Drawer forehead	510	60	2

1	Drawer bottom (fiberboard)	540	448	1
2	Drawer facade (laminated chipboard, MDF, solid wood)	116	596	1

Sometimes a drawer in the design of a box for an oven is abandoned altogether. It is absolutely not needed as a storage place, if the kitchen is large and there are enough drawers for the hostess. Then on the opening under the oven put "blende" (rigidly fixed facade).

In traditional kitchen ovens, the oven is combined with the hob. But not all housewives are satisfied with this option for organizing the workspace. To make the cooking process as convenient as possible, and the kitchen interior to be stylish and compact, special furniture is used to build in ovens.

Features and benefits of a kitchen with a built-in oven

An oven cabinet is a design designed to install an oven in it. It can either be part of a furniture set or be purchased separately.

The advantages of a kitchen interior with a built-in oven include:

external appeal - such an interior looks much more elegant than a kitchen with a conventional oven;
saving useful space;
the ability to organize a "working triangle" (cooking area) as it is convenient for the owners of the house;
practicality - such furniture often combines several functions at once. For example, it can serve as a storage system.

But such a solution also has features that must be taken into account when choosing:

the cost of built-in appliances, complete with furniture, is higher than traditional;
in the event of a rearrangement or failure of equipment, problems may arise: the oven will have to be changed along with the cabinet, since it will be difficult to find a structure that is suitable in size - usually the furniture is selected for the equipment, and not vice versa.

Types of designs of kitchen cabinets for built-in ovens

Two types of furniture are used for embedding equipment:

floor stands;
cabinets-pencil cases.

The curbstone for the built-in oven allows you to place it at a height of no more than 20 cm from the floor. For most housewives, this is a familiar option.

A cabinet for an oven involves placing equipment on one of its shelves and has the following advantages:

allows you to set the oven at an optimal height;
makes it possible to make it inaccessible to small children;
ideal for people who have a hard time bending over.

Pencil cases are not suitable for cramped kitchens - they look too bulky there. In this case, it is better to choose a higher base cabinet.

Depending on the shape, the furniture for the oven can be:

straight line - in the form of a rectangle. Typically, such designs are part of the furniture composition of the headset;
angular - they are made in the form of triangles or trapezoids and allow you to install equipment in the corner.

Particular attention should be paid to the material from which the cabinet is made. It must not only withstand the impressive weight of equipment, but also be heat-resistant and safe for humans.

For the manufacture of structures for the oven use:

Chipboard - it is inexpensive and does not have high performance properties;
MDF is a higher quality material. Furniture from it turns out to be durable and does not deform under the influence of steam;
natural wood is a material that requires special care. It is used in rare cases for the production of oven cabinets.

For the manufacture of rear walls and bent facade elements, fiberboard or plywood are used.

The material itself and its coatings must not contain toxic synthetic substances: under the influence of heat, they enter the air and can cause serious poisoning.

How to choose a cabinet for the oven - what are the requirements

Built-in ovens can be:

gas;
electric.

Gas ovens are more expensive, but they pay off faster - gas is cheaper than electricity. However, the heat in them is not distributed so evenly and some foods are not baked.

In any case, furniture must be equipped with a ventilation system - a grill or special openings. Some models are available without back panel.

Electric models are not economical and require high-quality wiring, but the dishes are cooked in them evenly, for which they received the recognition of most housewives.

It is important to choose the right size for your furniture. If this is an oven cabinet, then its height is usually from 65 to 80 cm.

Depending on the design, this parameter includes:

the height of the box for the oven - 59.5 or 60 cm (standard);
height of the legs / basement - 10-12 cm;
countertop thickness - 2-4 cm;
drawer height - 10-20 cm.

The depth of the cabinet is from 50 to 65 cm, depending on the model of the built-in appliances. Of these, about 10-13 cm. Is the overlap of the countertop on the body, which is necessary for the stable placement of the oven. Width varies from 50 to 120 cm.

The sizes of kitchen cabinets are more variable, their depth and width are identical to the parameters of the pedestals, and the height can be from 160 to 220 cm.

The module under the oven should always be larger than the equipment itself, in order to ensure free air circulation.

What can combine a cabinet under a built-in oven

A cabinet for a built-in oven can combine the functions of other household appliances:

Microwave ovens (microwave ovens);
hobs.

An oven with a microwave oven function has gained wide popularity due to its practicality and convenience. It allows you to use the oven as a microwave, and modern models are equipped with other modes of operation - for example, defrosting, grilling, baking.

Structurally, this technique is an oven equipped with a magnetron - a microwave radiation generator.

Any oven can be combined with a hob. There are two options for this technique:

dependent set - in it the cabinet and the panel have a common control system;
independent - in this case, the oven and the panel are purchased separately.

The dependent kit looks stylish and harmonious, but is inferior to the independent one in practicality - in case of a breakdown, the entire structure fails. In addition, in the latter case, there is a choice of technology that meets the needs of the hostess.

Additional equipping of oven cabinets - storage and opening systems

Oven furniture can be used to store kitchen utensils.

For floor pedestals, the storage system is represented by an upper or lower drawer of limited height. Because of this, only certain items can be stored in it. For example, pans and baking sheets.

A pencil case has more possibilities for organizing a storage system - in it it can be represented by open shelves, pull-out drawers and compartments with doors.

Usually the oven is built in the middle of the structure, so the storage compartment is located at the bottom or at the top.

In the closed sections of the cabinet-case, various types of door opening mechanisms are used:

swing doors - the simplest: the doors are hinged and open "towards themselves";
folding - horizontal hinged system: opening up or down;
lifting - opened with gas lifts.

Rules for placing a cabinet under the oven in a kitchen set

In order for the oven cabinet to harmoniously fit into the interior of the kitchen, to be convenient and safe to use, observe the following recommendations when placing it:

follow the “working triangle” rule - a space bounded by three points: an oven, a sink and a refrigerator. The total amount of its sides should not exceed 6 meters;
select a comfortable vehicle height. The best option is from 20 to 80 cm above the floor;
do not place the oven close to the refrigerator: this can lead to damage to one of the appliances;
the distance between the sink and the oven must be less than 45 cm to avoid short circuits;
the gas oven should be located no further than 1.2 m from the pipe - the longer the hose, the less reliable it is;
think over the opening area. It should allow you to freely pull the baking sheet out of the oven.

Stages and rules for installing an oven in a kitchen set

Installation of a built-in oven consists of several stages:

checking equipment for performance by connecting to the network;
installation of the cabinet in the right place;
checking the wiring - it must have a sufficient level of resistance and be grounded. It is desirable to have a circuit breaker that is triggered by voltage drops;
if the oven is gas - check the pipes. They must be intact, without damage;
placing the oven in the furniture niche. If the cabinet is equipped with a back wall, then holes must be made in it for wires;

[email protected]

The built-in oven is a very convenient model. Not everyone is satisfied with the option when the oven is located under the hob: especially when both units need to be turned on at the same time. The independent model can be placed anywhere and at any height.

Product dimensions

The production of ovens was started by foreign companies. This noticeably affected the dimensions of the product.

The standard width of models is considered to be 90–120 cm. This corresponds to the European concept of comfort.

However, the standards of Russian kitchen sets are completely different. Here, the cabinet for the oven and the hob has a width of 60 cm. In this case, the manufacturers of the devices gave way and began to produce models with the corresponding width. For example, the well-known manufacturer of household goods Ikea.

In order to ensure ease of installation, the width of the oven should be reduced by 1–2 cm.

Today you can find very miniature built-in models - with a width of 45 cm and a height of 60 cm. However, these are rather test samples. As a rule, even with a width of 45 cm, the height remains the standard 85 cm.
The depth in most products is 50–55 cm.

A curbstone for a built-in oven is usually equipped with a drawer for storing baking trays, dishes and other things.

Materials and tools

Do-it-yourself cabinet for the oven is a very real task. There are no particular difficulties here. To make it you will need the following:

plywood or chipboard 16–18 mm thick;
a worktop with a thickness of 28 mm or more;
legs;
furniture confirmations, dowels and screws;
guides;
electric drill;
joiner's glue.

Kitchen cabinet calculations

As a rule, the instructions for the oven contain data not only on the dimensions of the model itself, but also on the requirements for the installation niche. This should be used in the calculations.

The cabinet for the oven has dimensions equal to the parameters of the installation niche plus the thickness of the material used. In fact, it is a box with a double bottom - horizons 1 and 2 and a horizontal crossbar at the top - a body bar. The latter is required for the normal fastening of the hob to the worktop. In addition, this part maintains the distance between the sidewalls, which is also important.

First, you need to make calculations, then the following parts are cut out of the chipboard or MDF sheets:

sidewalls - the sum of the height of the niche, the thickness of the table top and the height of the legs - 2 pcs;
horizon - that is, the bottom, the dimensions are exactly equal to the parameters of the installation niche - depth and width - 2 pcs;
body strip - its length is equal to the width of the niche, and its own width does not exceed 100 mm.

The back wall of the drawer, as a rule, is not included in the detailing: it is made from fiberboard scraps. Usually its height does not exceed 100 mm.

Drawer parts are calculated using the residual method. This is easy to do:

the height of the facade is equal to the difference in the height of the kitchen cabinet, the height of the legs and the thickness of the first horizon. The facade does not cover it due to the peculiarities of the installation of the oven. Width corresponds to 60 cm minus 3 mm. As a rule, there is no handle here: to make it more convenient to use, a notch is made on the second horizon;
the side parts are equal in length to the depth of the cabinet minus the gaps, and in height - to the distance between the two horizons minus the gaps;
the length of the back wall takes into account the thickness of both sides and the thickness of the rails.

Chipboard or MDF can be cut to size in the workshop: using professional equipment, the pattern will take much less time, and accuracy is guaranteed. In addition, in most cases, parts are trimmed here - they close the ends with a melamine strip. Otherwise, the operation will have to be done by hand.

Assembling the product

The kitchen cabinet for the oven and the hob is assembled for confirmation or dowels. The fastening of the latter is duplicated with glue. Holes for them are drilled in advance.

Mounting on self-tapping screws is allowed.

First you need to assemble the box itself - the sidewalls and horizontals.
Then fix the body strip by lowering it 10 mm from the edge of the sidewall.
The legs must be attached to the bottom of the product with self-tapping screws.
If it is decided to make a drawer, then before installing the first horizon, guides are attached to the walls - hinged or telescopic.
Install the back wall.
Assemble the product and install it on the guides.

Do-it-yourself cabinet for the oven is ready. In the photo you can see a product that is in no way inferior to even well-known brands like Ikea.