Dahlia from foamiran: master class and patterns, photos and MK, how to make with video, flower templates. Master class of a clamp “Dahlia” from foamiran Dahlia from foamiran: forming a petal

Master class on making hair decorations from foamiran “Dahlias”

Chukmareva Maria Nikolaevna, teacher, MBDOU Pychassky kindergarten No. 2, p. Pychas, Udmurtia

Target: making a dahlia flower with your own hands from foamiran.

Tasks:
- introduce children to the material - foamiran, with its properties;
- create a desire to make dahlia flowers from foamiran;
- improve the ability to cut out small parts with scissors;
- develop thinking and fine motor skills;
- develop creative imagination, aesthetic taste;
- cultivate accuracy and perseverance.

Purpose: Flowers and floral arrangements made from foamiran can perfectly decorate the interior of your room, giving it some elegance and homeliness. In addition, flowers made from foamiran will look great as an independent product - a hair clip or headband. This decoration will serve as a wonderful, original addition to any hairstyle, and can also be an excellent gift for any celebration.
I bring to your attention a master class on creating a hair decoration in the form of a flower - a dahlia, made from foamiran.

The presented material will be useful to teachers working with school-age children, educators in their teaching activities, as well as to all parents who want to create beautiful flowers with their children with their own hands.

But first, I suggest you get a little acquainted with the magical material - foamiran.
FoamIran(Foamiran, abbreviated as fom) is a soft sheet material in a palette of 20 or 24 colors (depending on the manufacturer), used in various types of needlework. The average sheet thickness is 1 mm. Foamiran is mainly made in China and Iran. Iranian is considered to be of higher quality. It seems that it was in Iran that the technique of making flowers from this amazing material originated.
Foamiran- this is a plastic suede, it is used to create various types of decor: cards, magnets, flowers, hairpins, etc.
Foamiran- an innovative material with endless potential for creativity.
This material has many advantages:
- foamiran is easy to shape using light heat (for example, applying to an iron or curling iron), twisting, stretching, processing with modeling tools, etc.;
- foamiran can be painted and tinted with paints, patinas, powders;
- perfectly retains applied patterns and outlines on its surface;
- VERY IMPORTANT: this material is pleasant to the touch and after deformation the foamiran firmly retains its shape. That is why it is widely used for making topiary, flowers, jewelry (brooches, hairpins), dolls, decorative items for scrapbooking, etc. Flower brooches made of plastic suede do not wrinkle under outer clothing, and this is a very valuable quality;
So, having familiarized yourself with the advantages of foamiran, you can competently begin to create a flower - a dahlia.
This flower is also called - King of Autumn, since it blooms and smells fragrant in the month of September and majestically holds a magnificent crown - a bud - on a thin stem.
1.

There are many different interesting stories and legends about this flower.
The first legend tells how the dahlia flower appeared on earth. This legend tells that the dahlia appeared on the site of the last fire, which died out with the onset of the Ice Age. This flower was the first to sprouted from the ground after the arrival of warmth on the earth and with its flowering marked the victory of life over death, warmth over cold.
One of the legends tells how in ancient times the dahlia was not as widespread as it is now. Then it was only the property of the royal gardens. Only the royal family and courtiers had the opportunity to enjoy the beauty of these beautiful flowers. This flower did not yet have its current name. No one had the right to remove or remove the dahlia from the palace garden.
A young gardener named George worked in that garden. And as it should be in all legends, he had a beloved, to whom he once gave a beautiful flower - a dahlia. He secretly took a dahlia sprout from the royal palace and planted it near his bride's house in the spring. This could not remain a secret, and rumors reached the king that the flower from his garden was now growing outside his palace. The king's anger knew no bounds. By his decree, the gardener Georg was captured by guards and put in prison, from which he was never destined to leave. And the dahlia has since become the property of everyone who liked this flower. This flower, the dahlia, was named after the gardener.
These are such beautiful legends about the dahlia.
3. For the upcoming work we will need the following materials:
- shape: red and green;
- a couple of toothpicks;
- iron;
- scissors;
- thermo gun;
- ruler;
- a simple pencil.

4. We will need such parts – blanks – to make the flower.

5. First, let's prepare the details for the flower. On a strip of red fom 15 cm long, finely cut into thin strips with scissors.

6. We also cut the next workpiece, approximately 14 - 15 cm long, into strips 0.5 cm wide. We cut the remaining 2 workpieces in the same way, the only thing is that the width of the strips will increase according to the proposed drawing above.

7. Next, on all the workpieces, we cut off the ends of the cut strips with a “fence”, like this.

9. Please note that we leave the first blank with the thinnest strips in its original form, and the remaining strips should eventually be modified.

10. Let's start working with the iron. Heat the iron to medium temperature and apply the workpiece to it for literally 1 second. When heated, the parts will begin to curl slightly. Attention: do not forget about safety precautions when working with an iron.
-Before starting work, check that the cord is in good condition.
-Work while standing on a rubber mat.
-Turn the iron on and off with dry hands, grasping the plug body.
-Put the iron on the stand.
-Make sure that the sole of the hot iron does not touch the cord.
-Make sure that the thermostat indicator is installed correctly (according to the type of fabric).
-After finishing work, place the iron on the stand.
Attention! Do not leave the iron turned on unattended. This may cause a fire.

11. Let's start creating the flower, namely the middle of the flower. To do this, take a toothpick, for more convenient work, the part with the thinnest stripes, and using hot glue we begin to stick this blank onto the toothpick in a circle at the same level.

12.

13. In the same way we glue the remaining parts - blanks.

14. This is how the flower turned out!

15. For further work, cut off the excess part of the toothpick.

16. Next, we cut out dahlia leaves from the green fom using the template.

17.

18.Using the tip of scissors, draw veins on the leaves.

19.Glue the finished leaves onto the flower, placing them on top of each other. In order to hide the place where the leaves are glued together, you need to cut out a circle with a diameter of 2.5 cm from green foil and stick it on top of these leaves.

20. This is how the Kings of Autumn turned out - in all their glory!

The beautiful dahlia is one of the most interesting garden plants. It blooms for quite a long time, which makes it very popular among gardeners. Also, this wonderful autumn-summer flower can be found in interior and wedding floristry.

Dahlias come in a variety of shapes and shades. There are countless varieties of this plant. Thanks to such diversity, you can create the most extraordinary and exclusive flower arrangements with dahlias. The dahlia goes well with wildflowers, garden flowers, such as, and classic flowers, such as callas, lilies and roses. Interesting bouquets can be created if you take peonies or peony-shaped roses and dahlias in a delicate pastel shade as a basis. An unusual and sophisticated wedding bouquet can be composed of white dahlias, bud roses and cornflowers. Foamiran dahlia makes wonderful brooches, hair clips and other decorations.

In this master class I will show you how to make dahlias from foamiran of three types and shades. And in subsequent master classes you will find four more equally beautiful flowers, which can be easily made using templates and step-by-step photos. Let's start the MK with a spherical dahlia made of foamiran.

Globular dahlia and dahlia bud from foamiran: step-by-step master class and pattern

To create this spherical dahlia you will need:

foamiran (I took red, you can choose any other);
white acrylic paint and a damp cloth;
iron;
second glue;
tape;
scissors;
foil;

Dahlia pattern from foamiran

Here is a template for making this dahlia.

How to make a dahlia? Step by step photo

To make a flower we will need 3 petal circles from blank No. 1, for a bud we will also need 3 pieces.

Blanks No. 2, 2 pieces each.

Blanks No. 3, 2 pieces each.

We cut out 2 petal circles for the flower according to blank No. 4.

And 3 petal circles on workpiece No. 5.

From green foamiran we cut out 6 smaller leaves.

And 2 large leaves.

We cut out 2 sepals for the bud and flower.

We find the middle of the petal circles and make cuts parallel to each other. So we cut all the petal circles.

We tint the tips of all petal circles No. 1 and 2 with white acrylic paint and a damp cloth. Tint on both sides.

Petal circles No. 3,4,5 are tinted in the middle.

We process all petal circles using an iron at silk-wool temperature.

Take a piece of foil 8*8 cm and a piece of foamiran. We prepare 2 balls from foil for the center of the flower and bud.

Take a piece of foamiran, heat it on an iron and cover it with foil. This is the middle we will prepare for the flower and bud.

Then we prepare the petal circles. For petal circles No. 4-5, fold the petals in half inward and glue each petal at the bottom.

For petal circles No. 3, the petals of one circle are glued together at the bottom of each petal, for the second petal circle we are glued through one petal. We prepare petal circles No. 3 for the bud in the same way as for the flower. Leave petal circles 1-2 unchanged.

We take the blank and put on the first petal circle and start gluing the petals, glue every 3 petals, glue 4, then glue the middle one of the three. Then all the other petals. Then we glue 2-3 petal circle No. 1, glue all the petals at the base.

Then glue the middle one of the three. Then all the other petals. Then we glue 2-3 petal circle No. 1, glue all the petals at the base.

Glue petal circles No. 2 at the base. This is the middle we got for the flower and bud.

Then we take petal circle No. 3, where the petals are glued one at a time and put it on the core and glue it at the base.

Then we glue the second petal circle No. 3 with all the glued petals below.

We dress and glue petal circles No. 4 at the base.

Then we glue the petal circles No. 5.

Ready-made dahlia bud from foamiran, photo

This is the bud and dahlia flower we got.

Glue the sepals to the dahlias.

We process the leaves with an iron, squeezing them well on the mold. Then we tint with green oil pastels, blending well. We tint the tips of the leaves here and there with brown oil pastels.

We treat the dahlia stem with tape and glue the leaves onto the litons, forming branches. We attach the leaves to the stem.

This is how the sprig of spherical dahlia turned out.

Astro-shaped dahlia from foamiran: master class with step-by-step photos

This dahlia has this name for a reason, because it really is very similar to an aster. By the way, they turn out no less beautiful. But more on that in other master classes, but now let’s start making a dahlia.

To create this type of dahlia you will need:

purple foamiran for the petals and yellow for the core;
yellow and purple oil pastels a tone darker than foamiran + sponge;
iron;
orange stick for applying veins to the petals;
second glue;
wire;
tape;
small nail scissors and zigzag scissors;
elastic band, hairpin or brooch holder;

We start making a flower from the core.

Cut out a strip of 2*20 cm from yellow or lemon foamiran.

We cut it into small fringes, without cutting to the end 0.4 cm - 0.5 cm.

From foamiran in the color of the petals, cut out a strip of 2.5 cm * 30 cm. Cut one side of the strip with zigzag scissors.

We cut the strip along the zigzag step without cutting to the edge of 0.5 cm.

For the petals, cut out rectangles measuring 4 cm. * 1.5 cm - 13 pieces and 3.5 cm * 1 cm - 26 pieces.

We cut out droplet-type petals from rectangles.

Using nail scissors, cut out notches on each petal. You can do two on some of them.

We also make notches on the small petals.

Then we apply texture on the petals with a stick. 3-4 stripes along the petal.

Apply the tint directly with an oil pastel pencil. Apply tint to the top of the petals. We tint all the petals the same on both sides.

We also tint the purple strip with a purple color one tone darker than the foamiran. Apply the tint with a sponge and blend well.

We tint the yellow stripe with bright yellow oil pastels, directly with a pencil.

We begin ironing at silk-wool temperature. We process the purple strip so that it bends slightly, like eyelashes.

We process the small petals by applying them one by one to the iron.

We process large petals like small ones. But additionally we apply the bottom of the petal and slightly extend the stem.

We form the middle of the flower from the yellow strip. We take a thin wire, make a loop on it and begin to glue and wind the strip with fringe. The bottom should be smooth. Then we process the core with an iron. Just press it with your fingers so that it doesn’t fluff up.

Then glue on the purple stripe. We make 3 full circles, as if closing the yellow center. eyelashes look inward. After this, we tear off the strip, turn it over and then glue 2 more circles, but the eyelashes should be facing outward.

Glue small petals in a circle, next to each other. There are 10 pieces in the first row, we glue the second row between the petals of the first row, also 10 pieces.

And the third row, all the other petals are 6 pieces, wherever you see fit.

We glue the large petals in a circle next to each other.

Photo of a finished bud of aster-shaped dahlia

This is the aster-shaped dahlia we got.

We cut out sepals from green foamiran and tint them with green oil pastels. We tint the tips of the sepals with brown pastel.

We process silk - wool on an iron at a temperature. You can twist it slightly between your fingers.

Glue the large sepal.

Glue a hair elastic onto the sepal.

We cut out leaves from green foamiran and process them using an iron and mold. Then we tint them with green oil pastels, shading them well with a sponge, and we tint the edges of the leaves with brown pastels.

To ensure that our elastic band serves us for a long time, we cover the elastic band with leaves.

Then glue the second sepal.

This is the hair decoration we made with dahlia.

How to make a semi-cactus dahlia from foamiran, master class with step-by-step photos

In my opinion, this is one of the most beautiful types of dahlias. We will make it in a bright sunny shade.

So, for a yellow dahlia made of foamiran we will need the following materials:

yellow foamiran;
red oil pastel and sponge;
orange stick for applying texture;
iron;
second glue;
tape;
scissors;
hairpin, elastic band or base for a brooch.

We begin work on the dahlia with a template and blanks for the future flower.

To make this type of dahlia, cut out circles of yellow foamiran with a diameter of 9 cm, 8 cm, 7 cm, 6 cm, 3 pieces each. And a strip of white foamiran 2 cm * 15 cm.

Circles with a diameter of 6 cm are divided into 12 parts.

We divide the remaining circles into 8 parts.

And cut out the petals. You can make the tip of the petals round, or, like mine, slightly pointed.

White stripe into stripes, 0.5 cm.

And we also either round the ends or make them slightly sharper.

We tint the strip with oily red pastels. Apply the pastel to a sponge and blend well. Tinting can be applied on one side.

We tint all petals equally. Paint the center of the petal circles, shading from the center to the edge of the petals.

Then we take petal circles with a diameter of 8-9 and apply texture on each petal with a stick. As if outlining a petal.

We take a lighter, fold it along the grooves, heat it up and pinch the ends of the petals.

We take petal circles with a diameter of 6 cm and apply a drop of glue to the middle of each petal and clamp it.

We glue the petals of a petal circle with a diameter of 7 cm at the very base.

We process the strip on an iron at silk-wool temperature, applying it to the iron in parts so that the strips bend like eyelashes.

We take the wire and make a loop and begin to wind and glue the strip. So that the eyelashes look inward, forming the middle of the flower.

We take petal circles with a diameter of 6 cm. We put them on the base and glue them at the base and press the petals.

Glue the second petal circle with a diameter of 6 cm in a checkerboard pattern, lifting the petals.

Glue the third petal circle with a diameter of 6 cm at the base in a checkerboard pattern.

We glue the petal circles 7-8-9 only at the base, placing the petals in a checkerboard pattern.

Ready semi-cactus dahlia

This is the semi-cactus dahlia we made.

We take a universal mount for hairpins and brooches.

Glue the dahlia leaves to the mount using instant glue.

Then glue the dahlia itself.

Here's a brooch - a hairpin.

The master class was conducted by Marina Chentsova.

It is drizzling more and more often outside, and multi-colored leaves dance in circles. But we can prolong the charm of early autumn and lift our spirits with the help of creativity and flower arranging. Let's make a wonderful autumn decoration - the dahlia flower!

Materials:
foamiran (olive, dark green and any color);
wire No. 18;
a piece of cotton wool;
dry pastel.

Tools:
glue gun;
scissors;
universal sheet mold;
iron.

How to make a dahlia with your own hands.

Redraw the patterns and cut out the required number of flower parts. Using template No. 1, cut out 3 pieces. olive color, 1 pc. color and 1 pc. dark green. From dark green foamiran we cut out an arbitrary number of leaves.

We tint the edges of the petals on both sides with the selected color of dry pastel.

Make a loop at the end of the wire and glue in a piece of cotton wool, forming a spherical shape. The diameter of the cotton core is 1.5 cm.

First, apply the entire piece to the sole of the heated iron until it begins to curl inward. Then we heat each tip individually. And immediately squeeze each petal inward, as shown in the photo. We do this with all the petals.

Next we take on the leaves. We heat them on the soleplate of the iron. We print on the universal sheet mold. To form a central vein, fold the sheet in half lengthwise and heat the vein.

Let's start assembling the flower. Glue the olive blank to the cotton center. Try to glue it so as to completely cover the ball. Piercing with wire, we put on the next three olive-colored blanks.

Note that the petals are bent inward. So, one by one, from the smallest to the largest, we glue the remaining blanks.

Glue blanks 4 and 5 with the bent petals facing outwards. We continue assembly until the last pieces. Be sure to glue them together.

We tint the leaves and sepals with dry dark olive pastel. The sepals are ironed in the same way as flower petals. Glue two sepals so that they look down. To make a bud, stop the process at petals #1.

Decoration in 4 stages: dahlia from foamiran

An elegant dahlia will become an integral part of a fashion accessory. Foamiran is a material with which many needlewomen are familiar. It is not only pleasant to the touch, its color palette is diverse, it is an affordable and not very expensive material that can do wonders. Including decorative flowers that will make up any composition you need.

Master class: dahlia from foamiran, what you need

The dahlia is called the king of autumn for a reason. Indeed, many people associate this flower with the charm of autumn. And for autumn decor, such a foamiran flower will be very useful.

To make it you will need:

Foamiran (color of your choice);
Templates;
Scissors;
A piece of sponge;
Sharp tweezers;
Iron;
Acrylic paint.

Before you start making a dahlia from foamiran, you need to prepare the materials

Most likely, you will have to use ready-made templates or patterns. There are plenty of them on the Internet - choose the one you need and print it out. You can, of course, make your own templates, but if you are not sure, use ready-made ones. In this case, four petal patterns are usually used. All of them are, accordingly, different sizes.

Second step: pattern of a dahlia from foamiran

Take foamiran of the desired color, for example blue. On it, according to the patterns, you need to draw as many petals as are supposed to be in the flower. Each dahlia has its own number of petals, cut out with a margin using all four patterns.

Patterns for the future dahlia from foamiran

Take a petal and pinch it in the middle with tweezers. After this, paint can be applied to the petal on both sides. It is good to use acrylic art paint. When the leaf is sufficiently colored, it can be removed from tweezers. This way all the petals are painted. How exactly to paint, look at the original source - how interestingly colored dahlias are in nature, how simple, subtle, elegant. I couldn't find a better hint.

Dahlia from foamiran: petal formation

The petal must then be heated on an iron, and it must be shaped very quickly, before the material has cooled. You do this manipulation with all the petals. This will take a lot of time, but you need to achieve maximum similarity.

A ball with a diameter of 30 mm will do;
First, glue the smallest petals onto it, then the larger petals;
You can use something else instead of a ball, it’s just the most popular thing that is ideal for these purposes;
When the small petals are glued, you proceed to larger petals - they are no longer so twisted, they are glued in a checkerboard pattern, but on the pre-processed petals, veins are made with a needle on both sides;
In the next row, as you might guess, there will be even larger petals;
So, in the same checkerboard pattern, all the existing petals are glued.

It is necessary to form a dahlia petal very quickly

The authenticity of the created image will depend on how carefully the petals are painted and how accurately you glue them. You can cut out a sepal from green foamiran if it is needed in this composition.

How to properly make a dahlia from foamiran: working with the material

If you have not previously worked with foamiran or, as the material is also called, plastic suede, the process of interacting with this material is probably difficult for you. They love foamiran for its incredible plastic properties - it stretches very easily, and most importantly, it easily “remembers” a given shape.

And for suede to gain volume, the material just needs to be heated. The easiest way to do this is with an iron. Some people find small travel irons (collar irons) in the mezzanines, which in this case will be very convenient to work with.

Working with foamiran is quite easy

Plastic suede is very easy to cut with scissors;
If you use composters for scrapbooking, then you can easily make the most interesting blanks from foamiran;
The molds used in porcelain floristry also add texture to the workpiece;
Foamiran is quite easy to paint over, for example, with high-quality acrylic paints (this is necessary for tinting), but pastels are also perfect;
The easiest way to glue the blanks together is with a heat gun;
Special glue for foamiran is easy to find in craft stores today;
The warmth of human hands is the main tool that makes foamiran sparkle with its brightest colors.

It seems that this material is incredibly delicate, that only a very careful, pedantic person can work with it. This is only partly true. In this sense, plastic suede is considered a very rewarding material; even for beginners in this business, crafts turn out to be lively, spontaneous and neat.

This floral arrangement will be an excellent decoration for hair and clothes, because it is made of light plastic suede that is not afraid of either water or sun.

To work on the product you will need:
- plastic suede in pink and green colors.
-compass.
- scissors.
- red acrylic paint.
- toothpicks.
- lighter.
- two artificial gold leaves.
- three long stamens with beads.
- five green leaves.
- a bunch of small white flowers on a fishing line.
- some cardboard.
- a piece of green fabric.
- medium length clamp with teeth.
- “Moment” glue.
- a piece of foam rubber.
-glue gun.
And let's start work right away by cutting out the petal circles for the flower. The dahlia should be lush. We will cut circles of various diameters from pink foamiran. Each circle will correspond to 1 row of petals in the flower. The diameters will be 6,7,8 and 9 cm. Each circle needs 3 pieces.

Now we take the smallest blanks. Fold the circle in half, pressing the fold. Then, before the fold, we divide one part into three parts with scissors, without taking the middle part about 1 cm. We also cut the second half of the circle, and then we pass along the fold with scissors.

It turns out 6 equal segments, but they still need to be divided in half. And only now all 12 petals need to be rounded one by one, cutting off the upper corners. We process only 3 small circles in this way.

We will divide all other circles into 8 petals. Here you need to fold the circle in half twice, maintaining the folds and cut the whole middle.

And then we divide these 4 parts in half.

And we also trim the upper edges of the petals beautifully. We process all the remaining circles. The edge of the petals can be left smooth, or you can have a corner in the middle.

Now it's time to tint with red acrylic paint. Let's start again with the little ones. Using a piece of foam rubber, apply paint only to the upper edges of the petals on both sides.

And we paint all the other petal circles on the contrary, only in the middle on both sides.

For the center of the dahlia, we cut another strip, 17 cm long and 2 cm high. We make cuts on one edge, 0.8 cm wide, not reaching 0.6 cm to the edge of the other side. The result is a wide fringe. But you should also round each resulting strip. Then we paint the upper part of the fringe. And in our composition we need 3 such strips.

Next we move on to processing the petals. Now we take circles of two large diameters. On each petal we draw three veins with a toothpick. One will be central and two on the edges. Be careful not to tear the suede; you can use a toothpick to slightly break the sharp tip.

And for the two smaller circles, processing is more difficult. Let's start with the smallest ones. We will use glue. Each petal needs to be processed separately. Using the same toothpick, apply glue to the petal at the base, stepping back 0.8 cm from the middle. Let the glue sit for a while and use your fingers to fold the edges of the petal in the area of the glue, hold for a few seconds for good gluing. Let's move on to other circles. Here we do almost the same thing, but we glue the petals only at the very base, near the middle.

Now let's start forming the middle of the flower. We take a strip with teeth and, using the heat of a lighter, give a new shape to this part. We carefully bring the lighter to the bottom of the part and the petals themselves bend down from the heat.

Next, take glue and coat the uncut part of the strip, placing the teeth up. And then carefully glue the toothpick to the edge and simply roll the entire strip into a roll. The bottom edge of the resulting center should be even.

Now, based on this middle, we will form the entire flower. Again we will use the smallest circles first. Lubricate the bottom of the base with glue and pierce the middle of the petal circle with a toothpick. Lift it up and glue it to the base.

Then we glue the bottom of the side of the middle and press the first circle tightly to the base. And so we glue the first three circles.

Next, take the next three largest circles.

For these petals we apply glue only to their centers.

Let's move on to larger petals. They should also be glued only in the middle. But before that you need to make a clamp for each petal. At the very edge of the part, heat the material a little with a lighter and quickly press the two edges together with your fingers.

Only then do we fasten them one by one to the base. We get small circles at the top, and the largest one at the bottom. At this stage, the dahlia is ready.

Only two strips of pink suede remain. And from them you also need to glue the two centers on toothpicks.

Now we need green foamiran. From it we cut out 2 circles with a diameter of 3 and 4 cm. Like the petals, we divide them into 8 parts, rounding the edges. For little ones you can do more, but it doesn’t matter.

We also tint them red on both sides. First draw the veins with a toothpick.

It is necessary to give a new shape only with heat. Using a lighter, we heat the edges of the parts and they turn towards the middle of the workpiece.

We will collect all these details into buds. We take the centers and glue a large circle in the same way as a flower. But we attach the small one with the petals down. And the stick itself should be covered with green cloth. It turns out two buds.

But to make the whole composition interesting, you need to use additional decorations. And let's start by making a base on which we will attach everything. We cut out a circle with a diameter of 3.5 cm from cardboard and immediately prepare a circle 1 cm larger from any green fabric. Carefully glue everything, bend it, align it. Next you will need two golden leaves, which are often used in New Year's decorations. They also need 3 long stamens. You can use ready-made parts, or you can make it yourself. Using fishing line, beads and glitter thread. Next we will prepare 5 more green leaves from fabric, although they can be cut from plastic suede. You will also need a bunch of small white flowers. You can use ready-made flowers or make your own. And the clamp itself will be needed for the base.

Let's start the assembly. We turn the base face down and use a glue gun to attach everything one by one. First we fasten together two golden leaves with stamens. Next, glue one green leaf onto the stems of the buds and place them on opposite sides of the glued first part on the base.

Now we fix 3 sheets in a different direction from the buds. We attach a bouquet of white flowers a little to the side. And in the center of the whole composition we glue the main flower.

The arrangement of small details of the decoration can be arranged according to your taste. To finish, all that remains is to attach the clamp itself well. And for additional fastening, you can use a piece of green fabric and glue it through the inside of the clip to the base on both sides.

This interesting clip can be used on clothes and hair.

Good luck to all!