Rosreestr file with a floor plan is missing. comments to “How to read a cadastral extract received in electronic form?”

In fact, they are documents with a set of symbols that are incomprehensible to a common user. It is not possible to understand their content in this form. But more often than not, extracts must not only be read, but also saved, and also printed out for submission to various official authorities. Therefore, the question of converting the received extracts into a normal form accessible for understanding and reading is very relevant. How do I convert it for viewing and printing? To view and further work with files in the form of XML, you need to transform them. This can be done in several fairly simple ways. Let's dwell on each of them in more detail. Through the Rosreestr service It is worth noting that the Rosreestr website itself offers a special service that helps to read, save and even print such a file. It is called "Electronic Document Verification".

Open the xml file of the ugrn statement from the rosregister and get it in its normal form

In the top panel, open the "Tools" tab "Compatibility View Options";

in the opened box, check the item "Display all websites with compatibility mode";
press alt, in the opened menu open "Tools", "Internet Options". On the "Security" tab, select "Trusted sites";

then click "https servers must be checked for all nodes in the zone".

In the form that opens, using the "Add" button, enter the addresses: https: //*.rosreestr.ru and http: //*.arcgisonline.com/;

without leaving this window, you need to switch the "Advanced" mode. Select "Allow" in all lines.

The checkboxes from the enabled protected mode are removed.
An alternative to receiving a statement immediately in html mode, which does not need to be opened using software, is to order a document on the commercial site Ktotam.pro.

How to view the xml file of the ugrn statement from the rosreestr

Important

For some time now, documents received on the Rosreestr portal began to be sent in an inhuman XML format, although earlier there was also a regular PDF in the archive. All this is due to clause 37 of the Order of the Ministry of Economic Development of the Russian Federation of February 27, 2010 No. 75 "On Establishing the Procedure for Submitting Information Introduced to the State Real Estate Cadastre" and requests are submitted in electronic form, sent in the form of files in XML format ”.

Attention

This is how Nabiullina E.S. (the then minister) decided to "help" the citizens in getting information from the government. But enough of the lyrics ... The incomparable Internet Explorer will help us, God forgive me, to take a human-readable form for XML documents.

On the XML file, right-click - Open with - Internet Explorer.

How to open the rosreestr xml file?

It is very convenient to order cadastral information via the Internet on the Rosreestr website. But from July 1, 2013, cadastral information prepared in electronic form no longer contains a * pdf document.
This is due to the fact that the new version of the automated information system of the state real estate cadastre (AIS GKN) does not provide for the formation of a PDF document. The current legislation also does not provide for attaching a document in * pdf format.
The cadastral registration authority sends cadastral extracts, cadastral passports and cadastral plans of the territory in the form of two files: * xml and * xml.sig (* xml file signed with the electronic digital signature of a specialist of the cadastral registration authority). These files are not readable by ordinary computer programs.

You cannot print a full statement or other document in these formats.

A simple way to open the xml file of the rosregister statement

But what if you need to open an extract from Rosreestr XML and print it? Then you will need the following method of launching documents from the federal service. Otherwise, you will simply be left alone with a bunch of codes and databases.

But don't be scared, everything is not so scary: the following actions are very easy, so you will achieve your goal in just a few clicks. XML and SIG: how to open Rosreestr?

Now we will try to read the Rosreestr XML file in normal format.
First, you need to make sure that you own two documents: the XML file itself and its SIG digital signature. Without the latter, you will not be able to view the information you need.

How to read a cadastral extract received in electronic form?

If you have two versions of IE (64 and 32 bit) installed, it doesn't matter which one you open. If you have an ancient version of Explorer, then the document will be displayed immediately in the desired form, as we are used to seeing it in PDF format, otherwise we do this: Menu Tools - Developer Tools (or press F12) - Document Mode - Standard IE7 Now the document should be displayed as it should be.
However, if the document contains all sorts of tricky things like a plot of land, downloaded from a remote server, smart IE will block them. In order for them to be displayed, it is necessary to enable the blocked in the issued warning: Now everything should work and be shown. If it did not work out that way, we will again use the Rosreestr portal and select the link "Checking an electronic document" on the document receipt page: Next, select the downloaded file and click "Show in human-readable format".

How to translate documents from the Russian registry into a human-readable format?

So, to translate a file into a readable format, proceed as follows.

select the specified service on the Rosreestr website;
in the window that appears, press the file selection button and load the resulting document;
when the documents are uploaded, you need to check them by clicking the appropriate button;
a new button with the name "show in human readable format" will appear in the updated window;
after clicking it, the document will open in its normal form;
then it can be saved and printed.

A feature of an extract from Rosreestr in electronic form is its provision in an inconvenient for reading xml form.

Dear Readers! The article talks about typical ways of solving legal issues, but each case is individual. If you want to know how solve exactly your problem- contact a consultant:

APPLICATIONS AND CALLS ARE ACCEPTED 24/7 and WITHOUT DAYS.

It's fast and IS FREE!

What is the document, what information it contains, what are the ways to obtain information from the programming version and what to do if the graphic plan is not visible in the cadastral passport. Detailed instructions with examples.

What it is

Since January 1, 2019, all information contained in the state register of rights to real estate and the cadastre has been combined into a single USRN database. It contains information:

data from cadastral passports, drawings, coordinates of land plots;
cadastral number of the premises or land plot;
the area of the site, its boundaries, their designation on the ground, if a land survey has been carried out, the permitted use;
the layout of the premises, its purpose - residential or commercial, the size of its constituent elements;
cadastral value of real estate, close to the market value;
the date the object was put on cadastral registration;
the history of the transfer of rights to objects - the names of the owners, documents of title: contracts of sale, exchange, donation, inheritance, privatization, order of a state or municipal authority, etc.

How to get it

There are many ways to issue an extract from the USRN. You can apply personally to the departments of Rosreestr or the MFC, or order a document through the Russian Post in the original or use the services online.

Information on request is provided:

through the Rosreestr offsite;
using the commercial portal Ktotam.pro;
through a single resource of the State Service.

A request is sent by filling out a special form. To do this, you need to know the exact address of the property or its cadastral passport. If this information is unknown, then you can get it online for free through the Public Cadastral Map of Russia service.

The information is reflected on a single portal in automatic mode when the location of an apartment building, an individual building object or a land plot is indicated on the cartographic area.

An extract is required in the following cases:

plans for the acquisition of certain housing or building land or maintenance of subsidiary farming;
when concluding a preliminary sale and purchase agreement with a deposit to obtain information about the owner;
in case of land disputes - to draw up a land survey;
consideration of the case in court in relation to an apartment or premises for entrepreneurial activity, including in inheritance disputes, in connection with donation, disposal of the object of joint property of spouses, etc .;
checking the property for encumbrances when making a pledge or mortgage to the bank;
determination of the debtor's property within the framework of enforcement proceedings when collecting payments and other circumstances.

To receive a service through the State Register, you must register on a single portal and identify the user. Then go to the section "Electronic services" and select the item "Extract from the USRN".

The system will automatically make a redirect to the Rosreestr website, where an application is filled out, data on the person who applied for the public service, the address or cadastral number of the property.

If you do not know the exact location of the object or its cadastral number, then you can use the Public Map of Rosreestr.

On it, it is enough to enter the region and district where the real estate is located, mark the approximate location on the cartographic map, or find it by nearby houses or plots.

Information about the object will appear automatically. The service is provided free of charge, no request is required, all parameters are displayed immediately on the screen online if there is an Internet connection.

How to open an xml file of a USRN statement from Rosreestr

The algorithm for opening an encoded file is as follows:

Upon receipt of a response from Rosreestr, it is necessary to upload the electronic archive to a folder. There is no need to change the name, but the sig inscription needs to be transferred to the folder (1). It reflects the graphic plan for the apartment and its mark on the floor plan of the house.

Next, you should go to a special page on the Rosreestr website https://rosreestr.ru/wps/portal/cc_vizualisation, designed to open files of this type.
Then you need to click on the link "Select a file" and upload an electronic document in xml format.
After that, you need to click "Digital Record" (sig-file) on the document in the folder.
By clicking the "Checks" button, you should go to the "Show in human form" section.

After that, the browser will open the statement in the html format that can be viewed on any programs. In order to use the document later, you need to click "Save" or you can immediately print the help. If the corresponding buttons are missing, you can type a combination of numbers CTRL + C, for printing - CTRL + P.

If the graphic plan is not displayed

Sometimes, when receiving a document, it is impossible to read the object schema. The folder contains a document with the entry "There is no graphical floor plan".

In order for it to become available for reading, you need to move this document to the folder with the open html file. At the same time, you cannot rename the graphic plan, it must remain unchanged.

Now when you open an html document, you can see the layout of the object. It can be saved or printed immediately.

Difficulties arise with the opening of an extract from the cadastral passport. They are also provided in xml form. and xml.sig.

In order to view the layout of an object and basic information about it, you need to use the same methods as when opening usually an extract from the USRN, since now the information is contained in one database.

Online

There are also other ways to open an electronic statement from Rosreestr. To do this, you can use any common browser like:

Safari;
Internet Explorer;
Google Chrome;
Opera;
Mozilla Firefox.

An example of opening an xml file in Internet Explorer:

open your browser. In the top panel, open the "Tools" tab "Compatibility View Options";

in the opened box, check the item "Display all websites with compatibility mode";
press alt, in the opened menu open "Tools", "Internet Options". On the "Security" tab, select "Trusted sites";

then click "https servers must be checked for all nodes in the zone". In the form that opens, using the "Add" button, enter the addresses: https: //*.rosreestr.ru and http: //*.arcgisonline.com/;
without leaving this window, you need to switch the "Advanced" mode. Select "Allow" in all lines.

The checkboxes from the enabled protected mode are removed.

An alternative to receiving a statement immediately in html mode, which does not need to be opened using software, is to order a document on the commercial site Ktotam.pro. Information on the application for it is officially requested from the Rosreestr real estate database.

In addition, the advantage of using the server is the urgency of receiving a response to e-mail and the relatively low cost of receiving the service - 300 rubles. from individuals and 650 rubles. from legal. No funds are charged for mediation.

It is important to know that the electronic version of the extract is informative in nature and is not accepted as an official document by municipal and state authorities, does not serve as evidence in court.

Not all, but many users of modern computer systems often encounter incomprehensible XML. Even fewer users know what this data is and why it is needed. Well, what program to open is generally understood by a few. Although everything is quite simple in this matter, nevertheless, sometimes problems arise. Let's see what's what.

XML format - what is it?

To begin with, the XML format is a data type created using the special Extensible language using commands that include the descriptive part of the properties or settings of an object based on tags and attributes.

In simple terms, the XML format is textual and somewhat resembles the hypertext markup HTML that is widely used on the Internet. Therefore, a preliminary solution to the problem of how to open an XML file in a readable form can be the use of almost any, even the most primitive text editor or viewer. But everything is not so simple here, since the files themselves can have completely different purposes.

What are XML files used for?

Before giving an answer to the question of how to open an XML file in normal form, let's find out what these data types are for.

First, they can contain quite large amounts of information, for example, about music or video collections posted on the Internet. The files themselves are somewhat reminiscent of ID3 tags that are used in MP3 files and contain information about the name of the artist, album, year of release, genre, etc. information can relate not only to a single object (track or movie), but also to their whole set (albums, collections, etc.). The only limitation is the limit of the maximum possible number of lines in the text. This is what often causes problems when opening.

Secondly, such files are very often associated with specialized programs, and the text information contains data about some important settings of the application itself or about parameters set by the user. For example, in any music program, you can set your own parameters for one or more tracks, and then save them as a custom template. And saving, as is probably already clear, takes place in XML format.

How to Open XML File in Normal View: The Simplest Method

Now let's look at the easiest way to open this type of file. Let's take Windows systems as an example. Typically, there is no default association for this format. As a result, it is impossible to open the file with a double click.

On the other hand, even if you apply this technique, any modification of Windows will initially provide a list of several most suitable applications or prompt the user to select the executable EXE file by browsing.

The first thing that comes to mind due to the fact that the format is text, is the choice of an editor of this type. In the list of programs one of the first (if not the very first) is offered the standard "Notepad" - an application included in the mandatory set of any modification of Windows.

However, if you are solving the problem of how to open an XML file in its normal form, you can first launch Notepad itself, and then use the open command from the file menu or the standard combination of Ctrl + O for all applications. Of course, if this option is convenient , in the program selection menu, you can set the use of this method for all files of this type, or select the desired program in the menu yourself, which will subsequently open this format by default (double click).

You can, of course, use any Internet browser for viewing, but you won't be able to edit the data - just view it in the form of text, nothing more.

How to Open a Readable XML File: Optimal Programs

However, the matter is not limited only to a simple matter. It is just as easy to use more powerful word processors like Microsoft Word. An XML file in Word will have exactly the same appearance as any other, for example, in TXT format.

But it is worth paying attention to the fact that the alignment in Word, in fact, like formatting, is somewhat different from the standard Notepad. Yes, you can view or edit the data, but the structure of the document with all sorts of special indents (especially if there are long enough lines) can be broken.

But what many do not know for sure is that the problem of how to open an XML file in normal form can be solved even with the help of a MS Excel spreadsheet processor. True, this is where the line limitation comes into play. In other words, if the document contains too much data, the information will not be displayed in full.

But if we talk about how to open an XML file in a normal form, which is neither readable and editable, then it is better to use original programs that allow you to create data of this type, but not all kinds of notebooks, but special applications with support for the syntax of the language. Among them, we can especially note such as Oxygen XML Editor, EditiX, XML Marker and the like. Here you need to clearly understand that such applications are initially "sharpened" for the language and have much more capabilities compared to other text editors, even the most "fancy" ones.

Error opening XML format

So, with the question of how to open an XML file in normal form, we figured it out a bit. Now let's analyze some errors when trying to open such data for viewing or editing. Typically, the application you are using may display a message that it cannot open the XML file because the integrity of the object you are looking for has been compromised. There can be any number of reasons for this (for example, an incomplete or abruptly interrupted download from the Internet).

More crashes can occur when it contains invalid tags and attributes. In some cases, failures can occur when the XML file is an e-mail attachment. When you try to open it in standard programs like Outlook Express, the file is first saved as temporary data in the TMP format, and the program that is responsible for opening the original file you are looking for does not understand this extension. Therefore, it is better to first save the attachment in its original form, and open it afterwards.

What is the preferred method for working with XML files?

So we figured out how to open an XML file in its normal form. What to use? In the simplest version, any text editor or the same spreadsheet processor is suitable for viewing. But if editing is required, and even with syntax support, in order to avoid possible errors when entering commands, specialized applications are indispensable.