Air mattresses intex repair problem. Air mattress repair, puncture detection and sealing

Today I will share with you my experience in the repair of air mattresses, namely: how to securely glue the mattress with your own hands and repair the air valve.

PVC inflatable items such as pillow mattresses and boats are very practical due to their compact storage capacity. One of the few factors against such purchases is their susceptibility to punctures and cuts. The thin material underlying the product often becomes a victim of the paws, just as the mattress can die the death of the brave at the hands of a tin soldier who was forgotten to be removed from the floor after the game. In some cases, there are problems with the valves: the spacers burst in them! When asked about the maintainability of such products, sellers begin to shrug their shoulders and say that this is all a useless undertaking and no glue takes such material ... well, in principle, their answer is clear, their task is to sell you one more product, and then another one)). But, fans of the theme "!" such a people that he just needs to be convinced personally!

How air mattresses and boats are glued

So I remembered the skills when the question arose "how to glue the PVC pipes" with it so that it would be elastic! At that moment, we had to test the entire stock of various types of glue stored in the pantry, the result was negative. Searches on the Internet led to the modification of the well-known Moment glue, namely, the Moment Crystal came up, it was specially "sharpened" for working with PVC. But, at the time of the puncture of the mattress, my Crystal glue had already dried up due to the expiration date.

All the inflatable mattresses that I have ever repaired (in my case, these were Intex with a velor top), I glued with boat repair glue, bought at the nearest store. Although, judging by its smell, a similar appearance during application and heating, we can say that this is practically the same "Crystal". This glue was not expensive, plus the kit included material from which you can make more than one patch, of course, no patches are included with "Kristall".

How to find a puncture site in an air mattress

So, we have decided on the glue, now it would be better to find the puncture site)) if you have a pool nearby, this is not difficult to do, otherwise you will have to tinker. I looked for the puncture site like this: I pumped up the mattress and listened to the approximate puncture site. Next, I took shaving foam (you can use soapy water or shampoo diluted with water) and began to apply the resulting foam to the surface of the mattress, bubbles and a small air fountain suggested the puncture site. But, do not rush to look for more "on" probably not one puncture!

The place has been determined, you can start restoration work. By the way, maybe someone who gives up on all these patches and fiddles with glue will find this link useful: inflatable furniture, mattresses in Dnepropetrovsk, but those who are full of self-confidence read further)).

How to glue the mattress correctly

In order to put the patch qualitatively, you must strictly follow the instructions for using your glue. In my case, it was like this:

gently clean the puncture site and patch with fine sandpaper (do not make the patch small, as the larger its surface, the more securely it will be glued)
degrease both surfaces
apply glue to both surfaces and, which is important, then warm it up well with a regular hair dryer applied glue within a few minutes! This increases the reliability of the gluing!
be sure to pause 10 minutes indicated on the package and join the patch and the mattress (the mattress is deflated!) And press down hard. The decisive factor is the squeezing force and not the time, so you can hit the patch with a hammer through several layers of fabric, well, without fanaticism, of course))
let the glue dry for the time indicated on the package(if you pump it up before it dries completely, the mattress will start to undermine the air, the load in the place of the patch is large ..)

How to repair a valve on an air mattress

This is what the whole air valve of an Intex inflatable mattress looks like

And, if you get carried away a little with an interesting film in the process of inflating a mattress, you can damage the valve, this is an example in the photo. One of the two impellers burst on this valve.

Naturally, such a valve instantly released all the air. The owner of the mattress has already waved his hand at him, because it is useless to glue it, the impeller area is small, and the load is huge ...

Every modern family has an inflatable mattress. It serves as a bed for suddenly arrived guests, it can be taken on vacation: it is useful for swimming, it can be used as a bed, it is convenient to sunbathe on it.

But sometimes on vacation there is a problem of deflation, let's see how to solve it,how to glue the air mattress.

In contact with

Product features

An inflatable mattress is a cavity made of a special material of various sizes, which, as a result of filling with air, is converted into a sleeping place. They come in single and one-and-a-half sizes, but there are also wider inflatable beds. They also differ in height - there are large models up to 50 cm, and small ones up to 23 cm.

They are firmly established in the everyday life of students, nomadic brigades and those who do not have permanent housing and are forced to move frequently. It is also good to have an air bed if the area of the apartment is small so that you can put it in the closet in the morning.

The presented products are made of polyvinyl chloride - this is a rather soft elastic material, but, unfortunately, it is prone to be easily damaged.

Therefore, every home should know how to implementrepair of inflatable mattresses.

For those who cannot tolerate a chemical odor, we produce environmentally friendlymattresses without glue and odor.

They are often bought for children or the elderly who react painfully to various chemical components.

Attention!A high mattress can be used as a permanent bed by covering it with a blanket. In this form, it looks like an ordinary bed.

Such products are indispensable on vacation, you can sleep on them, sunbathe and swim.

Eliminating valve malfunction

If the product is not damaged in the form of holes and cuts, and it gradually releases air, then the reason lies in a valve malfunction. Ifair mattress repair workshopis far away, then you can fix the malfunction yourself at home by following the step-by-step instructions:

Fill the product with air and lubricate the valve with soapy foam. If it allows air to pass through, then foam will appear around it.
Then you need to remove the adjacent valve, and then the rubber gasket.
The end of the valve must be sanded with fine emery paper and greased with silicone grease.
Then put the valve back in place and pump the product again for testing.

Serious valve breakage can only be repaired in a workshop.... With such a simple taskhow to fix an air mattress, any owner can handle it.

Prices for inflatable mattresses

inflatable mattress

How to find a puncture

Preliminary repair requires study of the issue,how to find a hole in an inflatable question, because it is this unfortunate nuisance that causes spoiled rest and sleep. There are several methods for searching:

Tactile. This puncture detection method does not have any materials at hand. The mattress must be well pumped up and held with your hands above its surface at a height of 2-3 cm. At the location of the hole, your hands will feel a stream of air. To increase sensitivity, hands should be moistened with plain water.Also, the puncture site can be detected by ear - hiss and whistle will be heard from the damage.
Soapy. Dilute strong soapy water and then apply it to the surface with a sponge. Bubbles will form at the puncture site, mark it with a marker.
Submersible. Small mattresses can simply be immersed in a container of water and see where air bubbles come from.
Water. In this method, water is poured into the mattress - a small amount is used. The mattress needs to be shaken and then inspected. If a wet spot is found on its surface, then a puncture is located in this place.

Advice!It is necessary to start looking for damage from the valve, and then from the side seams: they are the ones who most of all suffer from overload. Next, you need to check the bottom, which is in contact with the ground or floor, because it is more prone to punctures.

Preparing for repair

Before starting the repair, it is necessary to prepare its surface for work. First, the mattress must be deflated and dried thoroughly.

You need to know how to properly deflate mattresses. In simple models, it is enough to open the valve and wait a certain time. You cannot press and crush it.

Other models do this differently.

For example, you need to know exactlyhow to blow off a BESTWAY mattress, since it has a special flap that prevents the mattress from deflating if the valve cover is accidentally opened.

In this case, you need to open the lid, and move the plate to the side, then the air will escape.

Now the puncture sites must be degreased with alcohol, acetone or gasoline. The flock cover will have to be removed, that is, carefully cut off. Rubber or plastic does not require additional processing and cleaning.

Preparing the patch

When making a patch, you should knowhow can you glue an inflatable mattress... If there is no material suitable for repair at hand, then any flap of thin rubber will do. You can take a piece from a car or bicycle camera, a child's toy, or any rubberized object. You can also make a patch out of cotton fabric that has been impregnated with rubber glue.

Which glue is suitable for repair

To repair the product, it is important thatwhat glue to glue the inflatable mattress... There are many adhesives, each intended for work with a certain type of material.

Experts advise choosing universal varieties, rubber and PVC compound.When dry, the adhesive should form a strong, flexible and water-resistant bonding layer.

The glue should be used in minimal amounts so that the layer is thin - excess will not help glue the rubber parts together. It is recommended to use the following types of adhesives for repairs:

Moment. It is a versatile adhesive that holds together almost any material: rubber, plastic, PVC, fabrics and more.
Polyurethane shoe. It is a reliable adhesive and forms a strong interlayer between the bonding surfaces. Only when applying glue, the surfaces should be connected and dried with a hair dryer.
PVC adhesive. Inflatable mattresses are often made from PVC, so this type of glue is best for them. It is necessary to glue, applying 2 layers on both surfaces, after which the composition is kept for 20 minutes.
Super moment. Fast-acting adhesives are also suitable for repairing this product, but contain substances that will damage the surface.Its main disadvantage is premature hardening and brittleness during the operation of the product.When the mattress dries, you may find a crackle of adhesive mass on the folds, which will again lead to the need to make repairs.
Real rubber glue. Does not stain when glued. It is necessary to apply two layers of glue to the surface, let it dry, then connect the surfaces and put a load on them for a day.

Prices for polyurethane glue

polyurethane glue

Advice!If you do not have a wide choice at hand, you can patch with any glue. It is important to follow the instructions for gluing surfaces.

What do you need for repair

Now we should talk abouthow to glue an air mattress at home, what tools and tools will be required for this If there is no special repair kit, then any available materials will do:

universal glue "Moment";
flaps of thin rubber;
alcohol or acetone;
cloth gloves;
glue brush;
marker;
soap or shampoo;
water;
thin sandpaper.

The listed materials are almost always in the house, so it is not necessary to purchase a special repair kit, because it is quite expensive.

Prices for glue "Moment"

glue moment

How to seal a puncture

Having found and marked all the defects, you can start the repair yourself. We offer step-by-step instructions,how to glue an inflatable mattress:

Remove air from the mattress, straighten it and carefully lay out the area to be repaired on level ground.
Using sandpaper, carefully clean the adhesive areas on the mattress and on the patch.
The cleaned areas must be degreased with any available means.
Spread a thin layer of glue on the prepared surface of the product and patch with a brush and let it dry for 10-15 minutes.
Place the patch on the damaged part and let the glue dry for 24 hours.

Important:You can put a small weight on the patch. A day later, the repaired mattress is pumped with air, the tightness is checked by lubricating the repair site with soapy foam.

There is one more significant moment,how to glue an inflatable mattress from the velor side, because in this situation, the above repair technology will not work. This applies to mattresses of the popular Itex brand and other manufacturers. To apply a patch to such a product, you need to do the following:

clean the velor surface to the size of the patch. To do this, moisten the surface with acetone and clean the pile with a blunt knife;
wipe the smooth surface again with acetone, and then you can apply glue;
let the glue dry, apply the prepared patch on the surface in the same way. Press it to the surface of the mattress and let dry for 24 hours.

Advice!How and how to glue an Intex inflatable mattress? The patch can be applied from the inside. In this case, the damaged area is pushed out through the valve and sealed in the usual way. Inside, the surface is rubber and does not require additional processing.

Repairing large holes and cuts

How to seal a hole in an air mattressif it is more than 5 mm. In this situation, do-it-yourself repairs may be impossible, it is better to entrust it to specialists. In specialized workshops, the repair of the inner part of the product, the gluing of large cuts and holes is carried out using special equipment.

Repair of damage along the seam

Complex issuehow to glue an air mattress along the seam,experts will help you to decide.

Home renovation may not work, therefore, if there is a workshop nearby, it is better to take the mattress to the master. Damage along the seam is repaired from the inside of the mattress.

To do this, the torn section of the seam is squeezed out through the valve, and then you can start repairing, following the instructions:

Wipe the rubber surface to degrease with alcohol.
Leave to dry completely - during this time, cut out a suitable patch, which can also be wiped with alcohol.
Lubricate the sides to be joined with glue and attach them to each other.
Press them tightly, leave to dry for 12 hours.

As the glue dries, turn out the mattress and pump with air.This is necessary to check the quality of the self-repair.

Damage prevention

To prevent the mattress from being damaged anymore, it is recommended to observe the following operating rules:

Remove any piercing objects or place a thick cloth underneath the mattress before tossing it on the ground.
Do not inflate the product too much.
Protect the product from the claws of pets.
The inflated mattress should not be dragged along the ground, especially when there is a person on it.
Do not jump or sit abruptly on the mattress.
The air must be released slowly.
Wash with soapy water.
Before folding the mattress and placing it in the closet, it must be thoroughly dried.

As you can see from the above you can see,how to glue an inflatable bed- the process is quite simple, you can completely cope with the repair of the product on your own. Better yet, avoid such damage. But if a puncture occurs, do not despair - everything is in your hands.

Every owner of an inflatable product sooner or later faces a problem: how to glue the mattress. An inflatable mattress is a very practical thing. Unfortunately, one of the significant disadvantages of inflatable products is the likelihood of getting a puncture. With this damage, further operation is simply impossible, and sometimes dangerous - when used on water. Even a very small puncture will lead you (or your guests) to wake up in the middle of the night on a deflated bed. So, let's discuss how and how to glue the mattress so that it will serve for more than one year.

Is it possible to fix the mattress yourself

There are many reasons for punctures - a sharp pebble, a splinter, a thorn from a bush or tree, claws and teeth of a pet. You should definitely not rush to throw away the product. Repairing an air mattress is common. Most often, patches and glue are used for this.

The repair process is often even easier than finding the puncture itself. Finding a small puncture is not an easy task when it comes to a tall double model.

Note! According to statistics, side seams are most susceptible to damage. The second place in the ranking is occupied by the so-called bottom of the product. But before you start looking for a puncture, you should determine if a damaged valve is the cause of the pressure loss.

Puncture or hole detection

So, more to the point - how to fix a mattress? As already noted, finding a puncture (especially visually) is not always as easy as it might seem at first glance. For effective detection, use one of the options below.

Water

With the help of water, it is quite easy to find a puncture. But there is a nuance - you need a lot of water. If the mattress is large, it will be quite problematic to apply this method in an apartment environment.

It is much easier to spot a problem at a pond. Place the mattress on the water. Ask a few friends to climb on it (so that it is as submerged as possible). Air bubbles will indicate the location of the damage. Taking this opportunity (the presence of a large amount of water), turn the mattress over and repeat the procedure (if there is any damage on the back side). In apartment conditions, the rubber product will have to be watered section by section with water until a puncture is detected.

Lather

The next effective method. Prepare a liquid soapy solution, pump up the mattress and gradually lather the surface with a sponge. Inflating air bubbles will show where the puncture is. This method is also good because in the process of detecting a puncture, you will at the same time wash the product.

In principle, hearing damage can be detected. It is best to search for a puncture in a quiet, windless place. Pump up the product and listen for the characteristic hissing sound. The sound may be amplified if the mattress is watered.

Liquid filling

This method works, but is not recommended for use. Firstly, a product filled with water becomes very heavy, it is quite difficult and inconvenient to turn it over. Secondly, once the detection procedure is over, it will not be easy to dry the inside of the mattress. If all this does not bother you, fill in water with the addition of soapy detergent inside. 3 liters of prepared liquid will be enough.

Starch or powder

Any fine powder will do. Sprinkle it on the mattress section by section. Where the powder begins to rise in a cloud is the puncture site.

Note! In some cases, there may be several punctures. Therefore, when you find the first puncture, keep checking the product to make sure there is no other damage.

Preparing for repair

After finding all the existing damage, mark them with a marker or paint with dry remnants. Before starting repair work, completely dry the surface naturally (it is not recommended to dry the rubber product near and even more so on heating devices). Degrease the area (with alcohol, nail polish remover, gasoline, acetone).

Note! If the puncture was found on the flock side, the area around the damage must be cleaned up. The best way to do this is to use a fine-grain sandpaper. Scrubbing the pile will allow the patch to adhere better to the mattress surface.

Algorithm of actions

In order not to miss anything, we will describe the algorithm of preparatory actions again.

Detect the puncture (s) in one of the ways and mark them.
Let all the air out of the mattress.
Dry the product naturally.
Clean up the area around the damage (if necessary).
Clean the area thoroughly. Check that there are no small particles or lint left around the damaged area.
Prepare the site for gluing the patch - degrease.

Mattress repair adhesive

In the question of what kind of glue to glue the inflatable mattress, it is better to make a choice in favor of a repair kit from the manufacturer. However, any adhesive designed for working with PVC and rubber products can be used to seal the damaged mattress. As an option:

"Moment" is universal - provides reliable adhesion, dries up throughout the day.
"Desmokol" or similar polyurethane (quite often used for shoe repair).
PVC boat repair adhesives.
INTEX glue.

Special attention should be paid to the last option, especially if you are the owner of a product of this company. Adhesive from a global manufacturer, ideal for the repair of INTEX inflatable products. Usually, in addition to glue, the kit includes vinyl film, a flock patch and instructions for performing work. The set is simple and easy to use. Among other things, the patches come in a variety of colors.

Note! It is not recommended to use superglue or supermoment for repairs. These adhesives harden after drying. Over time, they begin to crumble, which can damage the mattress.

Preparing the patch

Do not use large patches. The optimal size is one and a half to one and a half centimeters. Before using the patch, it must be degreased. The rubber parts can only be glued together after the degreasing agent has completely dried.

How to patch an air mattress when you don't have a professional repair kit at hand? In such a situation, you need to cut the patch from any suitable material. You can use flock rubber (from a child's toy) or a piece of vinyl (from an old air mattress). If you have a leaky bike tube in your shed or garage, cut it off to the correct size. It will act as a patch. For reliability, cut the patches with a small margin around the edges (no more than 3 cm). Cut off excess in the process.

How to apply a patch

The amount of glue applied directly depends on its type. So, for example, "Moment" universal is applied quite thickly. "Desmokol", on the contrary, needs to be distributed in a thin layer. After application, the glue must be dried a little, but no more than 10 minutes (read the instructions). You can shorten the time with a hair dryer.

Press the prepared patch firmly and leave to dry under the press. The "holding" time will vary depending on the type of adhesive. Usually - from 30 minutes to a day.

What if the problem is in the seam

If the seam is damaged, there may be several solutions to the problem. If the puncture is very small, fill the puncture site with glue and leave to dry completely.

The second option is more troublesome, but at the same time more reliable. Pull out the inside of the damaged area through the valve. Further - everything is as usual. Degrease, dry, apply glue, wait 10 minutes, press the patch to the puncture site, leave the product for 12 hours.

What if the damage has formed in the place of the previously glued patch? How to seal the hole in the mattress in this case? Do not delete the old one. During detachment, the hole may enlarge. Instead, cover the problem area with a larger patch, which will cover the old one with a margin.

To avoid the likelihood of "scuffing" the edges of the patch, they should be sanded with sandpaper. Then apply a thin layer of glue along the edge of the patch.

conclusions

A punctured mattress is not a reason to dispose of it. The algorithm of actions is as follows: find the damage, decide how to glue the inflatable mattress, carefully prepare the site and "patch up". Professional repair kits from the manufacturer do the job best. If it is not possible to purchase such a kit, use universal options (for rubber and PVC) as an adhesive for an inflatable mattress, and an old children's toy, a ball, an unusable inflatable mattress or a bicycle camera are suitable as an impromptu patch.

Video

No special skills are required to seal the air mattress and extend its life. It is worth mentioning that not all products make sense to repair. You can figure out whether the product can be recycled if damaged, even at the time of purchase. Inflatable mattresses that are worth trying to seal come with a patch and rubber glue. If there is no repair kit, it is most likely easier to throw away the product.

Features of repairing mattresses for bathing

Mattresses for relaxing on the shore and water get damaged more often than sleeping ones, having stumbled upon a sharp stone, an accidental splinter - any sharp object. At the same time, a repair kit is rarely included with them - this means that the mattress cannot be repaired. Attention should be paid to its design.

Products from two or more independent sections can be glued. A puncture in a separate part is inconvenient, but practically does not affect safety when swimming. It can and should be repaired. It is better to refuse swimming on a sealed one-piece mattress.

These recommendations apply to single damage. If the multi-section mattress is damaged again, moreover, in another section, operation on the water is not recommended. The same - if there are punctures on one section, but from different sides (bottom and top), since the mattress suffers strong loads in water - air pressure from the inside, water from below and from the sides and the body from above.

For repair you will need:

a flap of material similar in quality to a mattress;
waterproof glue;
degreaser, thinner, acetone, alcohol or high octane gasoline;
a heavy object with a flat surface - a press.

Important! The gluing site will always be a risk area. Do not swim far on a repaired mattress and do not overload it in excess of the norm specified by the manufacturer in the instructions.

How to determine the puncture site: two ways

The repair of air mattresses (of any type) begins with determining the location of the damage. It is not difficult to find cuts or tears along the seam; it is more difficult to see a puncture puncture. Cyclists and inflatable boat owners are familiar with this problem.

Method with water:

The balloon inflated with air is lowered into water and heated.
Air begins to escape from the damaged area, bubbles rise in a stream - this is a pointer to the puncture site.
In order not to lose the detected defect, it is first pinned with a finger, and then outlined with chalk, soap or a contrasting alcohol marker.

The disadvantage of this method is that you have to wet the product, and then dry thoroughly for further gluing. This is especially inconvenient when repairing velor mattresses - the silky surface dries for a long time.

Testing without water

If there is no container to lower the mattress into it or there is no time to wait until it dries out, then the puncture is found by the sound. The product is arbitrarily squeezed and listened to. Coming out of a small hole, the air hisses.

You need to be careful not to make a mistake. It is more convenient if the mattress is inflated loosely - then the dense part is moved around the perimeter in order to more accurately determine where the quiet hiss is coming from. The method is better than others for sprayed products, but it is the least accurate.

Another method is with soap. The product will have to be moistened, but not as much as when dipped in water. The bottom line is to inflate the mattress and lather the approximate puncture site. You don't need to press: if there is damage, air will come out of it by itself, inflating a bubble. On it, the future site for the patch is noticed.

Advice! If there is absolutely nothing to circle the puncture with, insert a match or a toothpick with a cut off point into it.

Several ways to repair air mattresses

To firmly glue the air mattress, be sure to follow five steps:

Stripping.
Degreasing.
Drying.
Primary treatment with adhesive.
Bonding with placement under the load during the day.

Important! The material of the patch should be identical to the mattress or as close as possible in quality and composition.

The patch is ideally put in double - on the inside and outside, especially when it comes to a cut or strong tear. For a small puncture, the outer glue is sufficient. In any case, it is necessary to ensure that the glue does not leak into the mattress - otherwise it will stick together and become at best uncomfortable, and at worst unsuitable for use. Therefore, the glue is applied in a thin uniform layer, 1-2 mm short of the edge of the patch.

Stripping is the complete removal of anything that interferes with the adhesion of the adhesive to the substrate. Smooth products are thoroughly washed, but velor types Intex, you will have to free it from the lint. To do this, take sandpaper with a fine grain, with care you can use a knife, razor, etc.

Urgent repair of minor damage with improvised means

As an "ambulance" for the damaged swimming equipment, assembly tape is used. Its advantage over other products of a similar purpose lies in the adhesion strength and elasticity. The method is also convenient in that it is applicable both at home and in outdoor conditions, while you do not need to wait until the first layer of glue dries. The disadvantage of this method is less strength and durability and the inability to repair a strong gap. The tape is good for puncture holes and small cuts.

Interesting fact
Gray adhesive tape, which has a stretching effect, is used by plumbers to temporarily fix a leak. And the insulation from such material lasts for years.

Mode of application:

Clean and degrease the damaged area.
Allow to dry.
Cover with tape. A long cut is desirable - in two layers: the first - along, the second - across.

White insulating tape for electrical wires has approximately the same technical characteristics. It is inferior to the "rubber" tape in width and stickiness. For temporary repair of a puncture in a sleeping mattress, it is suitable - but it must be fastened with two cross-to-cross sections.

Elimination of major damage

It is not advisable to repair a mattress torn at the seam with adhesive tapes: there is too much pressure on the side elements. In this case, a patch must be applied.

Advice! The wrap-around rigid frame reduces deformation of the mattress, making it more comfortable to sleep on. And the same element is a guarantee that the product will still serve after a major repair.

Possible difficulties:

A model in which the side elements are not an addition, but part of an inflatable balloon, is inconvenient for repair at home.
Reliable and sealed grip ensures uniform load pressure. To do this, it must be flat at the bottom, heavy and gripping every millimeter of the patch. In case of significant damage, it is difficult to select the required dimensions of the cargo, but it is necessary. If such a pressing tool is not available, but materials at hand of different weights and shapes are used, then some areas will leak air after the first use of the mattress.

To repair the mattress along the seam you will need:

two smooth thin slats;
clamps;
rubber-based glue;
acetone;
rectangular patch.

Procedure:

The area around the lesion is treated with acetone.
After its evaporation, glue is applied in a thin even layer.
The same preparatory work is carried out with two patches.
The lubricated parts are kept in air (the time of this stage is individual for each type of glue, it is indicated on the tube).
Carefully insert the inner patch and align its middle with the center of the damage.
The second patch is applied on top, carefully smoothed. After connecting the parts, no air bubbles should remain between them.
From below and above the seam to be glued, over the patch, slats are applied and fixed with clamps.
Leave the mattress in a vice for a day or half a day.

A more reliable repair method is only vulcanization used to repair car tires. For this service, it is better to contact the nearest tire fitting.

Inflatable mattresses are convenient for relaxing on the water or as a guest bed. If the product is damaged and begins to leak air, you should try to glue it. No special skills are needed for the procedure, only accuracy and time. A repaired single-section mattress will only serve on the shore, if there are several sections, it is quite permissible to swim on it.

Inflatable mattresses, sofas and beds, unfortunately, are not so rarely out of order. But do not rush to throw them away. And in many cases it is not necessary to contact the service center. Most problems can be quickly fixed on your own. Learn to patch, fix pumps and valves.

1 of 1

On the picture:

What goes wrong in inflatable furniture?

Valve, inline pump, shell- these are three "pain points". The valve may leak over time. You can try to repair it yourself without going to the "inflatable furniture repair". The pump breaks down when the brushes that rotate the manifold are worn out. And this malfunction is also removable. Sheath punctures and tears are the most common problem. To eliminate it, you need to buy a repair kit.

Comment on FB Comment on VK

Also in this section

How to choose the right sofa among the variety of models on offer? The main thing is to decide what its functional purpose will be, and also to take into account the peculiarities of the interior.

A beanbag chair is an extraordinary accessory that will fit into many styles and will become a cozy and original addition to the rest of the furnishings, will help transform the interior and add a bright note.

When thinking about buying a sofa, it is important to remember that it should be as comfortable as possible, functional and harmoniously fit into the interior of the living room. How to choose the right model according to style?

We will learn how to choose a sofa that is right for you, having considered the main types of modular systems, their pros and cons, as well as the interior styles in which this model will look most successful.

The corner sofa is one of the most popular pieces of furniture in interior design. What are its features that can be beneficially used when arranging the interior and what nuances should be considered when buying?

What kind of furniture is needed for a comfortable stay and high-quality restoration? Why does a sofa need wires and can you do without them? What kind of furniture is chosen abroad, and what - in Russia?