How to make a homemade air conditioner in the car. Homemade air conditioner from a car radiator

Every year the heat breaks new records, the prices for air conditioners soar, and you always want coolness in the house without large financial costs. We offer you several ways to escape from the summer heat, for which you only need improvised means and ingenuity. We will tell you how to make an air conditioner at home.

Important! All air conditioners made at home use the principle of cooling the surface by evaporating water. Of course, a homemade air conditioner can not be compared with a split system, but it can lower the temperature in the room by several degrees. Consider some examples of making home remedies for heat.

Remedy for the heat from our ancestors

Even in the days of the absence of cooling systems, our ancestors used a wet towel. They wrapped, for example, a bottle, and put it in a through place, and in the process of water evaporation, cooling occurred. This principle formed the basis of the simplest climatic device - a wet towel on the fan housing. If the process is automated, then part of the towel can be dipped into a container of water, it will be absorbed by the cloth and evaporate under the influence of the air flow.

The most primitive home air conditioner

If you do not want to spend a lot of time assembling a complex device, but still want to make an air conditioner at home with your own hands, you will definitely like this method.

To create a cooling system you will need:

several plastic bottles of frozen water;
fan;
wire for fasteners or a bottle tray.

Proceed like this:

Freeze bottled water.
Space the containers a couple of centimeters apart by placing them on a drip tray or by mounting them directly to the fan.
Turn on the fan.

Advantages of a homemade device:

cheapness;
reusable.

Disadvantages of this design:

a problem with the removal of condensate that appears on the surfaces of bottles;
frequent need to replace bottles with containers of frozen water.

Pipe, water and fan

This is another option on how to make an air conditioner at home using frozen water and its cooling properties, which is also not difficult.

To make the device you will need:

several plastic bottles with frozen liquid;
a piece of plumbing plastic pipe (with a diameter slightly larger than the diameter of the bottle);
fan;
hot glue.

Manufacturing instructions:

Place a few plastic bottles of frozen water inside the pipe.
Attach the fan to one end of the plastic pipe with hot glue.
Turn on the fan.

The principle of operation of this device: a directed air flow passes through the gap between the bottles and the walls of the pipe. Such contact of air with cold objects greatly lowers its temperature.

Disadvantage: there is no condensate outlet, but if you make a few holes at the bottom of the pipe, this will not be a problem.

Important! Do not point the structure at a person, especially in the summer heat, as this is unsafe for health.

Hose, copper pipe

If you set out to make an air conditioner with your own hands a more advanced device, take this method into service.

This design uses:

garden hose (preferably made of rubber);
thin copper tube;
fan.

Manufacturing:

From a copper tube, form a radiator over the entire surface of the radiator grill (leave gaps for air flow).
Fix the formed radiator.
Connect one side of the tube to a cold water faucet.
Run the other end down the drain.
Turn on the cold water faucet.
Connect the fan to the mains.

Schemes of portable (portable) air conditioners

Such climatic devices will be a real salvation for people who are tied to their workplace: office workers, gamers.

Container, ice and cooler

The principle of this small air conditioner is the same as that of previous models. Its main advantage is compactness, ease of use and direction of action.

In order to make an air conditioner with your own hands, you will need:

plastic container for 1.5-2 liters (for storing food and non-food products.);
cooler (from the computer power supply);
corrugated plastic siphon;
stationery knife;
glue gun.

Step by step assembly instructions:

Make a hole in the lid of the container - slightly smaller than the fan.
Using a hot glue gun, stick the cooler into the lid so that it draws air into the container.
Make a hole in the other end of the lid with a clerical knife (this is a hole for a corrugated siphon).
Cut 25-35 cm from the corrugated plumbing siphon.
Glue this piece into the lid with a gun.
Fill the container with ice.
Close the lid.
Turn on the fan in the power supply.

Your portable air conditioner is ready. Rotate the siphon section and direct cold air anywhere in the room.

Air conditioning from an old refrigerator

If you have an old refrigeration unit, then it will perfectly serve as a means of freshening the air in the room. In fact, it is a real air conditioner. The principle of operation is based on the transfer of heat by freon from the evaporator to the condenser.

To make the device you will need:

2 fans;
plastic pipe;
electric jigsaw (with a saw for metal);
assembly foam.

Step by step instructions for making:

Drill a hole for the fan in the door.
Install a fan in the freezer door to blow air in.
Make a second hole to let the cool air out.
Insert a plastic pipe into this hole.
Carefully close the gaps with mounting foam.
Install a second fan facing the condenser for better heat dissipation.
Turn on the refrigerator and fans, and you can cool the room.

Important! You can make more than just an air conditioner out of an old refrigerator. Want to know how else you can use it? We have covered this topic in our review.

Cooling device from a car radiator

In order to make an air conditioner with your own hands from a car radiator, you will need:

radiator (preferably from domestic cars);
fan (can be bought with a radiator at an auto parts store);
plastic clamps;
rubber hose;
sealant;
case from a computer power supply;
terry towel (as a pallet).

Manufacturing instructions:

Mount the radiator on the back of the case.
Install a fan on the front of the case.
The airflow must move from the heatsink to the fan.
Install rubber hoses on the pipes extending from the radiator, attach them with clamps.
Water is supplied through one hose. Connect it to a cold water faucet. The other hose serves as a means for withdrawing water.
Put the whole structure on a towel.

Important! The main thing in this system is the speed at which water will pass through the radiator and the speed of the fan motor. All this depends on the speed of cooling the room.

The advantage of this device is the absence of condensation.

Flaws:

the radiator must be connected to the electrical network through a 12 V adapter, which must be purchased separately, or used from an old computer power supply;
labor-intensive manufacturing method;
if the apartment is equipped with water meters, then such an air conditioner will cost a lot.

How to make air conditioning in the car?

To make a car version of the air conditioner, you will need:

a plastic container (a container from a cooler bag is best);
saloon radiator from the stove;
a small submersible pump (aquarium or from a machine washer);
a pair of fans;
connecting tubes.

In the car, the device can only work from the cigarette lighter, so if you do not have a car charger for your phone, then you need to purchase one.

To make an air conditioner in your car with your own hands, follow these instructions:

Install the pump at the bottom of the container.
Pull the wires from the pump out.
Poke a couple of holes in the lid of the container for the fans.
Fasten the fans.
On the inside of the lid, install the stove radiator with silicone.
Connect the wires from the fans, pump, charger.
Connect the pump to the radiator using connecting pipes.
Pour ice into the container.
The device is ready to work.

Important! The car air conditioner is able to provide comfortable conditions in the cabin for up to 5 hours. To get rid of excess noise during the operation of the air conditioner, put a hose on the radiator outlet.

Traveling in hot weather by car without air conditioning is unpleasant and undesirable for a number of reasons. The heat inside the car can not only cause the body to overheat, but also increase the risk of trouble on the road, as the driver loses alertness when overheated. To this we can add that no one likes to sit in a hot car.

The problem of air conditioning is especially acute for those situations, and when you have to stand in traffic jams for many hours, there is no oncoming air flow through the open window. Therefore, a home-made air conditioner on the water, which is presented below, is very simple in design and inventive idea, although low-power, but for some time it may come in handy on the road for the car and its passengers.

Details on video slides

It functions on the use of ice, so it does not work for long, about 1 hour. You can improve this refrigerator-air conditioner for a car using Peltier elements. Their effect is that when voltage is applied, one side of the element will heat up, and the opposite side will cool. As a result, we can cool the water in the air conditioner. Therefore, it is worth thinking about improving the design presented below.

What do we need to make an air conditioner?

A plastic container, or, as it is otherwise called, a cooler bag. Small water pump powered by 12 volts. Suitable for aquarium. Car heater radiator. Several pieces of wire. Tubes for connecting the pump. Pair of fans. Dremel, silicone, piano hinges, cigarette lighter plug.

Action one. We put the pump on a homemade air conditioner.

First you need to strengthen the pump, it must be installed at the bottom of the container. Wires from it must be removed to connect to a power source. In this case, coolers from a PC at 12 volts are used as fans. They are placed in the cover of the device. Since it has two layers in plastic containers, you need to make a square hole from the inside according to the size of the coolers. On the reverse side, you need to make two holes with a dremel. Fans will draw air from inside. Fix the cooler with its own screws.

Step 3. We put the radiator.

We will put it from the inside of the lid. The pipes must point downwards. We use silicone to install the radiator. In addition, you can put on hot glue or epoxy.

Action 4. Completion of the creation of the air conditioner.

For the convenience of the lid design and quick replacement of ice, you can use a piano loop. We connect the radiator to the pump with a hose. The outlet hose from the pump is connected to the radiator inlet. To avoid the sound of water, it is advisable to also put a hose on the outlet pipe.

Next, we connect all the elements to the vehicle's on-board network. If your coolers and pump require less than 12 volts to function, consider using a cell phone charger. In the author's model, as a source, the output is 12 volts through the cigarette lighter.

For the working condition of a home-made simple air conditioner, ice is placed in a plastic container, water is added. When the power is on, the pump will pump cold water through the radiator. At the same time, the coolers will remove cold air from the container into the passenger compartment, cooling it. Naturally, when the air conditioner is running, you need to close all the windows and doors of the cabin.

It will be cool inside the car for at least one hour. For example, in a traffic jam, this air conditioner will be a salvation from the heat. There is another option that they sometimes want to do - (the link leads to an article about a Peltier device), which is unlikely to be effective in a car.

About where to buy goods for cars at the lowest prices,.

For those who like to craft at their leisure, making an air conditioner in a car with their own hands is a real challenge that simply needs to be accepted. Especially if it is unbearably hot outside and your car is not equipped with a climate control system. A homemade air conditioner for a car is not as complicated as it seems at first glance, the design. The most important thing is to know the principle of operation of this device and stock up on all the necessary equipment, because the design of the future portable car air conditioner depends on the available tools at hand.

To begin with, let's figure out what is the essence of the device of a mobile air conditioner for a car. There are two types of air conditioners: compressor and evaporative. For the manufacture of the former, special equipment is required, as well as various expensive parts and perfect knowledge of cooling systems. Another thing is relatively simple evaporative systems. Namely, the device of self-made cooling devices is most often based on their principle of operation. The trick is that in order to evaporate water, such a cooler-humidifier requires a large amount of heat, which it takes from the environment.

It is possible to design an evaporative air conditioner for a car at no special cost. For this you will need:

the simplest plastic container (an unnecessary cooler bag is also suitable);
saloon stove radiator;
two computer coolers with dimensions suitable for the container;
bilge pump;
hoses and wires;
fasteners;
cigarette lighter plug.

Then fans are mounted, one of which is intended for blowing the compressor of our car air conditioner, and the second for blowing out coolness. To collect warm air, several holes are drilled on the sides.

Installation of all of the above home-made devices is carried out in any part of the car's interior - the main thing is that the air enters exactly where it is needed.

We can conclude that designing an air conditioner for a car with your own hands is a very simple and not at all expensive business. So if you are looking for an affordable way to save yourself and your passengers from the heat, a homemade cooling system is just what you need.

Video “Do-it-yourself air conditioner for cars”

After watching the recording, you will learn what parts the car air conditioner consists of, how to assemble it and how to care for it.

In the manufacture of a do-it-yourself refreshing device for the home, the principle of cooling the surface by evaporating water is most often used. Many variants of such devices are quite simple, so everyone can build a home-made cooling air conditioner at home with a minimum set of funds.

The simplest device for the home

The simplest cooling device that does not require almost any material, financial, time, or intellectual costs will be the design of a fan and a wet towel. The towel is thrown over the mechanism, the air passes through, evaporating the water. The evaporation process cools the towel, so the passing air will become slightly cooler. This method can be slightly improved by lowering the end of the towel inside a container of water.

It will not be possible to cool the room in this way. But for individual use it will be effective.

Fan + plastic container. Option 1

The most common option for building an air conditioner from improvised means is a combination of a ventilation mechanism and plastic bottles with cold water or ice. You will need:

ventilation mechanism;
plastic or other containers;
ice/chilled water.

Action plan:

The container is filled with cold water, frozen.
Cooled, mounted to the fan grille or placed in front of it. Be sure to leave gaps of 1-2 cm for circulation, cooling the air flow.
Consider a way to collect condensate, which will definitely appear.

The water needs to be changed periodically. You can make two sets at once, cooling them alternately.

Fan + plastic container. Option 2

cooler;
plastic containers (three two-liter and three half-liter);
foam tape.

Manufacturing:

For two-liter containers, you need to cut off the bottom, drill holes inside. In one case - from below, in the other - from the side.
Wrap the cooler with foam tape (for fixing, absorbing vibrations).
Place the mechanism between the cut off parts so that the bottom of the bottle with side holes is at the bottom.
Remove the bottom from two container lids.
Inside two half-liter bottles on the side, make holes equal in diameter to the neck.
Insert the neck of a large capacity inside the side hole of a small one, fix it inside with a cut off lid (you can use a long knife or other tool).
The second, small, fix with the first in a similar way. Now the small bottles can rotate perpendicular to their bases.
Attach a third half-liter container with ice to a plastic box with a cooler.
From above, cover it all with a two-liter bottle with two small ones attached.

An impromptu homemade plastic bottle air conditioner is ready to use. The air flow is regulated by rotating half-liter containers in two directions. It will be useful for a small room, with individual use.

Fan + copper pipe

You will need:

fan mechanism;
copper tube/rubber hose;
water pipes.

Mounting scheme:

Wind the copper pipe/rubber hose to the protective fan grille and fix it. It is necessary to leave gaps between the turns of the tube, hose for free circulation, air cooling. There should be no strong bends.
Connect one end of the copper tube/rubber hose to the faucet. Take the second one to the sink. In this position, the structure can be fixed.
Open the water under low pressure.
Turn on the fan mechanism.
Adjust airflow direction.

Such a unit is able to cool a medium-sized room. Can be costly due to the large amount of water supplied.

container + cooler

Necessary materials:

plastic container with a volume of 1.5-2 liters;
minifan from a computer power supply;
corrugated plastic siphon;
glue gun;
mounting knife.

How to make a homemade air conditioner, assembly design:

Inside the lid of the container, cut a hole slightly smaller than the minifan;
Glue it to the lid so that the air flow is directed inside the container (using hot glue).
Cut a hole for the siphon pipe.
Cut off 25-30 cm from the corrugated plumbing siphon.
Fix the resulting segment inside the container lid with a hot gun.
Put ice inside the container.
Close the lid tightly.
Connect the minifan to the mains.

The direction of the cooled air can be adjusted with a siphon. If possible, it is better to use a large piece of ice. The air flow, getting into the container, will be able to circulate in it and cool more. In the case of small pieces of ice, there will be no such air circulation.

The direction of the cooled flow can be adjusted using a siphon. It is better to use a large piece of ice. The air flow, getting inside the container, will be able to circulate and cool more. With small pieces of ice, there will be no such circulation.

Radiator + auto fan

Source materials:

car radiator;
12 V auto fan;
frame for fan mechanism;
case-fixator;
fastenings;
rubber tubes;
a set of clamps;
insulating tape;
sealant;
12 V power supply.

Device instruction:

The outlet for the radiator temperature sensor must first be closed with a tight plug.
Fasten the radiator horizontally to the fixing panel.
Fix the autofan so that the air flow is directed from the radiator into the room.
Using clamps, install the rubber hoses on the radiator tubes.
Connect the cold water supply hose to the faucet.
Place the drain hose in a sink or bathtub.
Place a drainage container under the structure.
Eliminate air pockets inside the radiator.
Connect to mains.

The device reduces the temperature by supplying cold water. The cooling time of the room depends on the speed of the autofan, the speed of the liquid supply. The power is low, it will cool a small room.

Old refrigerator + fan

Necessary:

old refrigerator;
plastic pipe;
two fan devices;
jigsaw;
assembly foam.

Manufacturing process:

Cut a hole inside the refrigerator freezer door for the first mini fan.
Fasten so that it blows air into the chamber.
Drill another hole in the same place.
Insert a plastic pipe inside the resulting hole to bring the cooled air out.
Seal gaps tightly with mounting foam.
For better heat dissipation, you can install a second cooler, the air flow from which will be directed to the condenser.
Connect the structure to the network.

An improvised air conditioner from an old refrigeration unit can be a good alternative to the climate system. The principle of its operation is based on the supply of heat by freon from the evaporator to the condenser (like many air conditioners).

Fan + Peltier elements

Air conditioning on Peltier elements is a controversial device, the energy efficiency of which is low. It looks like an electronic double-sided plate with two wires. After connecting to electricity, one side heats up, the other cools. Device Diagram:

Purchase Peltier elements (4-8 pcs).
Attach with the heated side to the finned aluminum heatsink.
Install the radiator so that it is cooled by fresh air.
Attach a computer cooler to cooling surfaces to force room air in their direction.

The Peltier air conditioner cools the temperature, while consuming a large amount of energy. Half of the energy consumption is heating the second side.

This video demonstrates the process of creation, test experiments of a homemade cooling mechanism

The disadvantages of homemade air conditioning far outweigh the pros. Before embarking on manufacturing, it is necessary to weigh all the pros and cons well. If the construction of the already existing fan mechanism and a couple of bottles will cost nothing but the time spent (cooling, replacing containers), then more complex devices will require some material investments, a lot of time for their assembly, arrangement.

Friends! More interesting stuff:

Ouch! There are no materials yet (((. Scroll through the site again!

Publication date: .

With the onset of summer comes the heat, which becomes truly unbearable on the road. Sitting in a traffic jam for many hours, when it literally soars from the asphalt, is a nightmare for any motorist. And if the built-in “condo” is also acting up, then it’s just right to douse yourself with cold water and ice in order to at least somehow alleviate your condition.

Although a huge number of gadgets have already been invented for cars that work from the cigarette lighter, air conditioners for cars remain a mysterious and incomprehensible topic for many. On the market and on the Internet, you can find a bunch of different gadgets called with a serious word - air conditioning. However, to understand whether they have something in common with your favorite office oasis, let's look at the principle of operation of these devices.

The principle of operation of a car air conditioner

The air conditioner installed in the car at the manufacturer's factory works on the same principle as office units. That is, it absorbs heat through the evaporator, cooling the interior of the car. At the same time, the "exhaust" air is discharged into the environment (outside).

The air conditioner itself is a sealed system filled with freon and compressor oil. Oil reduces friction, partially removes particles released during operation and circulates in the air conditioning system.

Based on this, it becomes obvious that a car air conditioner can only be a unit that can utilize air to the street. And of course, such a device cannot cost 3,000 - 5,000 rubles.

The Chinese air conditioner from the cigarette lighter to the car outwardly and in its functions is more like a conventional fan. Such a device does not cool the air, but only passes it in a circle, creating a light breeze. Manufacturers go to tricks and proudly call such products a 12-volt car air conditioner, but in fact, in nature, such units are still produced only for trucks. These overall devices, powered by a voltage of 24 V, crash into the cab roof and cost about 85,000 rubles.

Nevertheless, as they say, “pain is tricky for inventions” and if you really need an analogue as close as possible to the air conditioner, then you can make such a device yourself.

How to make a mini air conditioner for a car with your own hands

You can make something similar to air conditioning in a car from the cigarette lighter yourself. For this you will need:

a new or old plastic refrigerated container (aka cooler bag);
an appropriately sized stove radiator;
several fans (you can buy the same as for computer video cards);
wires;
pump (you can take an aquarium or from a glass washer barrel);
old car cell phone charger.

The pump must be fixed at the bottom of the cooler bag, and the wires from it should be brought out. On the inside, we make a square cutout with a diameter of the prepared radiator, and on the outside we cut out two round holes for the fans.

After that you need:

Screw the fans and combine them into wiring.
Install the radiator on the inside of the cover, lowering its branch pipe down.
Cigarette lighter powered car air conditioner

To prevent it from falling off, you can additionally strengthen it with silicone.

Healthy! If there are piano hinges lying around in the garage, you can use them to connect the lid and the container body.

Connect the pump outlet and the radiator inlet on the cap. To prevent water from interfering while driving, you can also attach a hose to the radiator outlet.
Run the wires to the old charger.
Ready.

This installation does not look the most presentable, but copes with its functions. Before connecting a home-made unit to the cigarette lighter, it is necessary to fill the container with ice and fill it with water. As soon as the air conditioner turns on, the pump will begin to draw cold water from the container to the radiator, and the fans will blow the resulting cold air through the car.

The advantages of such a device are its environmental friendliness and low cost. If we talk about efficiency, then a home-made air conditioner can also boast of this. An hour later, when the ice melts, it is enough just to fill in a new portion and the unit will again saturate the red-hot car with coolness.

In custody

As you can see, unscrupulous Chinese manufacturers only confuse motorists by passing off ordinary fans that are not able to cool the air as full-fledged air conditioners powered by 12 V. If you look at the control buttons on such gadgets, you will see that there is even close It's not about cooling. Usually there are only "fan", "off" and "on" buttons. But air conditioners for trucks are not fiction, but real, expensive and difficult to install units.

Climate control system

Climate control systems are either standard on the car, or it can be installed for a fee. Installing climate control on a car is a rather complicated and time-consuming engineering operation.

In any case, it is better to entrust it to professional specialists in this field, otherwise you risk money and the comfort of driving your car - you never know what you will do there on your own.
By no means all car models, even the most modern ones, are convenient for installing climate control, and what can we say about older models.

The definition of an air conditioner with automatic control includes two fundamental concepts - we will call them "brains" and "iron".
The "iron" that is hidden under the hood - condenser, compressor, connecting hoses, etc. - it is part of any air conditioner from entry-level to the most advanced levels. But another “iron” is important to us - which is under the torpedo the air conditioner heater block.

Robot protection

This is where warm air turns into cold air and vice versa. And the main difference between climatic devices of different types is precisely in the principles of controlling this unit and in the design itself.

Drivers who use the climate control system are spared from having to constantly move the damper levers - with climate control, you just need to set the temperature you need. The microprocessor device is guided by the information coming from different sensors and independently automatically selects, sets and maintains the desired temperature mode, regardless of what is happening outside at that moment.

It is also worth noting that the aforementioned microprocessor device would not be worth anything if it were not endowed with intelligence, that is, an appropriate program - an algorithm that takes into account all the variety of familiar comfort conditions for different climatic conditions.

Of course, a complete automatic system should not involve human intervention, but it cannot exclude it either - if necessary, the driver can set the appropriate climate regime himself.

Portable mini air conditioner in the car 12 volt

Characteristics of the car: The dimensions of the car are as follows, length - 3389, width - 1100, height - 1511 mm. The wheelbase is 2133 mm. Ground clearance 183 mm. The car is equipped with a hybrid powertrain. The 2-cylinder engine is equipped with a system that provides engine power output.

Mini air conditioner in the car 12 volts - truth or scam?

There are 4 valves per cylinder. The diameter of one cylinder is 71 mm, the piston stroke is 76 mm. The engine crankshaft and accelerates to 8000 rpm. The maximum torque is maintained up to 5000 rpm.

Posted by admin: at the request of Alberic

Watch a VIDEO about how to make an air conditioner in a car with your own hands in KAMAZ.

Evaluation by a car owner named Nicodemus: In the car there are 5 main and 2 additional seats under the rear row of seats, the ceiling of the cabin is high to make it more convenient to climb into the 3rd row, while the back of the passenger seat of the 1st row folds forward, the back of the 2nd row of the right side also folds forward - this is how a cargo area with a length of 2.8 meters is formed. In this situation, 3 people rode on the left side plus a sofa: a base, two backs, two sides, of course, the right mirror was not visible. Briefly, I would call Zafira a dream of a summer resident. I don’t advise with a deep gauge, since the ground clearance under the protection of the crankcase is 12.5 cm. To put it bluntly, the car is sharpened for high-speed and comfortable driving on good roads, the maximum passport speed is 197 km, if possible, I drive in places in the absence of photo greetings 160 km, while handling is excellent.

Título original: Hoe om te maak lugversorger in die motor met hul hande in die KAMAZ

Release date: 17. 09. 2015

Duration: 3:05

Quality: Blu-ray

Laughter in the subject: At a reception at the American embassy, the US ambassador boasted that, they say, they have a sorcerer in the state of Alabama - he raises the dead. V.M. Molotov calmly noted that in the USSR there is a wonderful athlete who overtakes an airplane at a run. Khrushchev, having heard about this fact, summoned Molotov to himself. “What are you talking about, Mikhalych? Well, how - they will demand to present a miracle athlete? - First, we will demand that they present their necromancer. - And if they do? - We will demand a check, let him raise ... Stalin, for example. Nikita, not like an airplane - you can overtake a rocket!

Video instruction: how to make an air conditioner in a car with your own hands in KAMAZ

Car mini air conditioner: is there any sense in it

Should you install an air conditioner in your car?

Air conditioning in a car can be installed not only at the factory. This device can be additionally equipped with almost any machine. In this article, we will consider the pros and cons of such tuning, and also find out which cars can be equipped with air conditioning.

Installation pros

The main purpose of an air conditioner is to cool the air in the cabin. With it, you can easily and quickly cool a car that has warmed up under the hot sun. The second action is the dehumidification of the interior air, which helps to effectively combat the fogging of glasses, for example, during rain.

In many cases, installing an air conditioner will cost less than buying a new car with this option.

And most importantly, this convenient system can even be installed in cars where it is not provided at all, for example, on the VAZ "classic".

Cons of installing an air conditioner

Air conditioning is a very complex system, consisting of many large and small elements. They are located both in the cabin and in the engine compartment, noticeably "eating up" the place. When the air conditioner is installed in a car that is not suitable for this, there is a danger of overheating of the engine due to the blocking of the free space around it.

But the most important drawback, which will definitely manifest itself when the air conditioner is turned on, is a drop in engine power. It is believed that a running compressor takes up to ten horsepower from it, which is especially critical for weak engines. In this case, it is better to turn off the air conditioner when climbing uphill and overtaking in the oncoming lane.

Along with a drop in power, an increase in fuel consumption is observed.

Air conditioners for cars from the cigarette lighter in Krasnodar

On average, it increases by 0.5 - 0.8 liters per 100 kilometers. Another minor drawback will be the increased noise of the car due to the running compressor and condenser fan.

Is air conditioning harmful to health?

There is an opinion that air conditioning in a car is a direct path to a cold. Partly, it is. But here it all depends on the correct use of this system. Many drivers turn on the air conditioner for a long time, which causes the air in the cabin to cool very much. When getting into a car on a hot summer day, a person is dressed in light clothing and is likely to catch a cold from the temperature difference. To avoid this, it is enough to use the air conditioner more carefully, without turning the interior of the car into an ice cave.

If it is difficult to constantly monitor the operation of the air conditioner, there is an option to install an automatic control unit. In this case, you get almost climate control. This device will control the activation of the air conditioner for you, maintaining the set temperature.

Another nuance of the air conditioner that affects people's health is bacteria. During operation, moisture condenses on the evaporator (installed under the torpedo) and creates an ideal place for the reproduction of special microorganisms - legionella. They are carried into the cabin by the air flow and can lead to the development of pneumonia in people. Particularly vulnerable in this case are those who have weak immunity, as well as the elderly and smokers.

To prevent bacteria from growing inside the air conditioner, manufacturers use germicidal filters or a suitable evaporator coating. You can also carry out antiseptic treatment of the air conditioner. Such a service is provided in many car services where car air conditioning is refueled.

It is noteworthy that the treatment of the evaporator is not included in the scheduled maintenance work, which is carried out on new cars by the dealer. Thus, those wishing to take care of their health will have to pay for additional work. As always, everything related to health is not cheap - cleaning the air conditioner is estimated at 2,500 - 3,000 rubles.

How is the air conditioner installed?

In most cases, installing an air conditioning system is a very complex undertaking. Especially on machines that are not designed for this. In each case, a compressor, a clutch for its inclusion, an evaporator, a condenser, connecting lines, electrical elements, and wiring must be installed on the car. And also - to “make friends” all this with a standard interior heating system, since the same air ducts are used.

In Russia, automobile air conditioners made in Italy, Japan and Israel are most common. The most popular brands are Alex Original, Autoclima and Unicla.

What cars are installed and how much does it cost?

As mentioned at the beginning of the article, you can put air conditioning in almost any car. Car services successfully install air conditioning systems in Niva, Volga, Zhiguli and, of course, foreign cars.

The cost depends on the level of complexity of the work and the class of the car. For example, installation of an air conditioner on an average foreign car is estimated at $2,500. For the VAZ-2110 - 1,300, and for the Volga or Niva - 1,400 dollars.