How to make a phone stand at home. All options for creating a smartphone stand from a plastic card What you can make a phone stand from

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a wooden phone stand with your own hands is to simply make it from a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a base, such a homemade phone stand can have any wood and can be shaped into any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small planks.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be problematic to find the right angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a stand for a phone of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your handmade mobile phone stand to be beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and you don’t need a special tool for this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.

A mobile phone is a thing that should always be at hand. In the age of information technology, this is hard to argue with. Sitting behind the wheel, cooking in the kitchen, doing needlework or doing other things when your hands are not free, a homemade and original phone stand will become a necessary accessory.

It is simply impossible to imagine a modern person without a smartphone or telephone.

By material

In order to know how to make a comfortable phone stand, let's find out what material is used to make it.

Often, the owner, who wants to have a phone always at hand, wants to arrange it in a convenient way.

• Metal. The metal accessory will be durable and will last a long time. The cost of such a thing will be higher in comparison with the rest, made from more budgetary material.
• Tree. Popular and affordable material. Bamboo, ash is a common type of wood that is used to make holders.
• Ceramics. These holders look elegant, but, unfortunately, are very fragile. Masters working with this material make coasters in the form of animals, shoes, hearts, geometric shapes.
• Textile. A more childish option, when the phone is located on a small, specially sewn pillow or soft toy. This type of phone stand can be made by hand.
• Plastic. A versatile material that allows you to choose the color and shape.
• Paper. With your own hands from paper, you can very simply build a stand for the phone. This is a practical, lightweight option when no other alternative is available.

Modern smartphones have learned to do many different things, successfully replacing our clock, voice recorder, navigator, player and even a mobile cinema.

By style

Note! When choosing a stand style, take into account not only your individual preferences, but also the design features of the room in which it will stand.

Before ordering or creating a DIY phone stand, decide on a style.

• Vintage. A variant made in the form of an old thing made of wood, metal, leather or ceramics, with a design for fixing the gadget.
• Minimalism. Plastic and paper are the main materials of this style. An excellent choice for those who are not interested in extra details.
• Classic. Option for conservatives. Mostly the manufacture of holders in this style of wood, metal.
• High tech. Modern style, without additional decorative elements. The material used is plastic.

A stand is a useful and convenient thing in everyday life.

By appointment

On the table.

The main thing is the strength of the structure.

1. Adhesive based. Products in the form of a circle, one side is glued to the phone, imitating a support, which makes it possible to put the phone at an angle of 45 degrees.
2. On a stand. Fixes a device of any size. It consists of a bottom plate, which is installed on the table and a clamp, in which the gadget is placed.

Universal.

If you are a creative person, then you will find the makings of a phone stand in any item.

1. There is an option when the bottom side of the holder has a mount that can be attached to a table or any other surface. The base of such a device is usually flexible and rotates 360 degrees.
2. The second popular option: in the form of a flexible tripod that can take absolutely any shape. This type can be used: on a walk, in bed, while washing dishes, in a car - absolutely in any convenient place.

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home.

In auto.

It is very convenient to purchase a magnetic holder for the car.

Installation principle: one side is attached to the device with a magnet, and the other to any accessible place in the car.

Phone stand made of unusual and improvised materials

Stationery binders

The device is strong enough and able to hold the phone.

If suddenly in the office it was necessary to fix the phone in a vertical position: here's how to quickly make a phone stand from improvised materials with your own hands. The binder consists of two parts, a colored clip made of plastic or metal and a steel-colored paper clip. We take two binders and fasten them together. We put forward one paper clip in the direction of the phone.

Using pencils

Try making a phone stand out of pencils.

Materials needed: 6 pencils and 4 rubber bands. We assemble a three-dimensional triangle: a tetrahedron. We fasten the ends of two pencils together and put the third one between them.

Important! To build a design, you need to take pencils with rubber bands at the ends to avoid unnecessary slipping.

bottle models

To make a model from bottles, prepare the material: any bottle from a cleaning agent, dishwashing liquid or shampoo, scissors.

Bottom line: the work should resemble a pocket.

Important! The size of the bottle should be at least twice the length of the phone.

Cut off the neck of the bottle and the front wall to the middle. This stand will be relevant for use while recharging. To do this, make a hole for the charger in the upper back of the container. Fold the phone inward, and insert the charge first into the hole, then into the socket.

Such a model can be painted, decorated with paper or cloth.

paper clips

The variant with a paper clip will require minimal costs and time.

The paper clip must be straightened into a straight line. We bend both edges of the paper clip upwards, retreating by 1 cm. Then we retreat by 4 cm from both sides, this part of the structure should fit snugly against the table, like a support. The next step is to bend the paperclip in the middle up so that the previous bent parts remain even, perpendicular to the table.

From a credit card

Set the resulting zigzag on the table, the work is ready.

Place an old, unnecessary credit card in front of you in an upright position. Step back from the edge 1 cm and bend the edge towards you. Divide the rest in half, bend, but in the opposite direction.

From Lego constructor

Take a wide plate - the basis of the children's designer.

It is necessary to fix several bricks from the designer on the plate, in order to support the back panel of the phone, the angle at which it will be fixed will depend on the height of the wall. To fix the device on the sides, take a few more identical bricks and fix them on the base.

From a cassette case

We insert a mobile device into the pocket where the cassette was once stored.

If you have an old cassette cassette left at home, it is very easy to create a holding structure: open it as far back as possible so that the part with the cassette pocket remains in front, and the cassette cassette top cover is placed on the table.

DIY phone stand made of paper and cardboard

Attention! Before you make an origami paper phone stand with your own hands, find and prepare the patterns you like.

You can make a small phone stand with your own hands from the simplest materials.

• Folding cardboard stand. You can make a phone stand out of thick cardboard. Take a sheet of cardboard and cut out a figure: 10 by 20 cm. Fold it in half. Step back from the fold 2 cm and at an angle of 45 degrees cut the cardboard with scissors, not reaching the edge of 2.5 cm. Then change the angle at which you cut, it should be perpendicular to the bottom edge, in this position cut another 1.5 cm, lower the corner of the scissors 45 degrees and cut 1.5 cm down and then again perpendicular to the bottom edge, to the end.

Homemade cardboard smartphone stand.

• Cardboard triangle. Before you make a simple cardboard phone stand, prepare the materials: a strip of cardboard, pushpins, glue or tape. Take a strip of cardboard and fold it into a triangle. Fix the edges with glue, tape or buttons.

In 5 seconds, you can make a solid and strong stand for your phone.

• From a bushing. An excellent do-it-yourself phone stand made of cardboard will come out from the remaining paper towel sleeve. The wide sleeve must be cut in half. In the resulting part, cut a horizontal hole where the phone will fit. From the buttons you need to make legs so that the stand can be placed on the table.

Here's how to quickly and easily make a functional do-it-yourself phone stand out of cardboard.

• Origami. A good paper phone stand will come out of a regular A4 sheet. There are several schemes by which you can fold an excellent support for the device. Knowing how to make a paper phone stand, you can always fold it in a few minutes and enjoy it.

Origami paper phone stand.

DIY phone stand made of wood

We take a wooden beam and make a blank out of it, aligning and processing the edges. Attach the gadget and cut it to size. Corners must be rounded and sanded. Having made the markup for the grooves, cut them out. Take a chisel and carefully clean the cut grooves. Sand the work again before oiling.

Homemade and original stand is ready.

DIY phone stand made of wire

Using ordinary wire, by twisting in a variety of ways according to the schemes, you can create an original holder for a mobile phone. The main thing is that the weight of the device is evenly distributed on the homemade holder.

The advantage of this DIY phone stand is that you can place your phone on it both horizontally and vertically.

Everyone knows why and when you need a phone stand, knowing the quick ways to create it from improvised means, you can always comfortably watch a movie or do household chores and chat with friends via video link.

Also, this stand can be used as a holder for tablets and e-books.

VIDEO: How to make a phone stand.

50 variants of original phone stands:

Mobile phones have become an integral part of our daily life. Even children already use them from the very first grades of school. In order not to leave your gadget just on the table, consider how to make a phone stand from improvised materials.

First option: from binders

Let's figure out how to make a phone stand with your own hands from what is in almost every home. There are quite a few ways. In this master class, we will make it from binders (paper clips).

This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.

To work, you will need binders and a suction cup.

Production order:

1. Connect the binder to the suction cup (a towel holder will work too) in the place where the hook is located.
2. Attach the back of your phone to this suction cup when you need to put it down and you're done.

The advantage of this type is that you can place the phone in any position, both horizontally and vertically, or at an angle.

Second option: paper

When there are a lot of papers of different colors at hand, the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.

To work, you need 24 white checkmarks and 23 pink ones. Check marks are the simplest element of modular origami.

To make modules, do the following:

1. The triangular module is made up of rectangles to make them the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
2. Fold the rectangle in half.
3. And again in half, then unfold to make a fold line in the middle.
4. Bend the edges of the rectangle to this line, and those where the first fold line goes.
5. From below you have formed a ledge, bend its corners up to the edge of the first part.
6. Now bend the entire remaining lower canvas up to get an even triangle on the back side.
7. Fold it in half. And you will see that you have pockets on both sides.

Now let's move on to our question, how to make a phone stand from such modules:

• Fasten white checkmarks in a circle.
• Then place pink ones between each pair. So you get a cone tapering upward.
• Continue assembling the structure to the desired height and you're done.

This method is suitable for those who like to work with paper using the modular origami technique, if you like to cut and paste everything more, then pay attention to the following model.

Third option: from a shampoo bottle

How to make a DIY phone stand from a shampoo bottle? The work will turn out to be very stylish, despite the simple materials, it will look expensive, as if purchased.

Manufacturing progress:

1. Choose the right size shampoo bottle.
2. Make a line in the middle and cut along it. For convenience, it is better not to do it straight, but to leave a protrusion with a slot on the back side, so that you can not only install the stand on the table, but also hang it on the wall.
3. Take beautiful paper with an ornament (you can use wrapping paper), wrap the stand with it and glue it.
4. Carefully cut off the excess wrapper around the outline. Your work is ready.

This craft will look great in your home, especially if you choose the right color and pattern for wrapping paper. You can independently come up with a form for such work or make according to the model. This was one of the many ways to make a phone stand.

Fourth option: from popsicle sticks

One of the most original options for making a phone stand is using Eskimo ice cream sticks. To do this, ask friends and relatives in advance not to throw out such sticks.

When you collect enough, they will need to be glued together:

• first make the bottom;
• then the backrest to the height of the phone;
• the side ones will look good when tilted.

You can connect parts not only with glue, but also by gluing a transverse stick for greater strength.

There are many ways to make a phone stand from scrap materials. We have considered only a few of them. It all depends on your mood and imagination. Even from the old designer "Lego" you can make a wonderful option or sew a wonderful wall cover from dense fabric.

Use any idea. Enjoy your creativity!

It happens that in some places there is not always a stable connection, in my case, the Beeline operator, since the tower is far away and the nearby trees prevent it from transmitting a signal calmly. I didn’t want to make any antenna for the phone, I came up with a simpler one, this is a phone stand that could be placed in the place where the connection is stable and does not depend on weather conditions. And about how to make a stand for the phone, I will tell you in this article.

As in any other homemade product, we need to decide on the necessary materials.

In order to make this stand you will need:
* Parquet.
* Board width 8cm.
* Epoxy adhesive.
* Threads, matches.
* Black felt.
* Hacksaw for metal.
* Drill and drills for it with a diameter of 3 and 6 mm.
* Coarse and fine-grained sandpaper.
* Screw length 55mm.

That's all the materials that we need, which is not hard to get, and if there is no parquet, then any strong board will do.

Now you can proceed to the gradual manufacture of the stand.

Step one.
First of all, you need to determine the dimensions of the future stand, for this we measure the dimensions of the phone that you want to install in the stand in the future, and do not forget to measure the thickness.

In my case, the thickness of the phone turned out to be quite large for the current time, after all, 1.5 cm is not small for a phone in 2017, but all this, taking into account the fact that the phone has a protective bumper.
For convenience, we make a drawing on paper or in a program, as I did.

Step two.
After you have decided on the size of the stand, you can take the tools and cut out the main part. The basis in the stand is its so-called back, the dimensions of which are 8 * 9 cm. We take the thickness of the base 5 mm, no more and no less, because we don’t want the stand to be heavy or too fragile due to lack of thickness. To do this, I sawed across an already sawn board 8 * 9, reducing the thickness from 18 to 5 mm.

Now you need to drill a hole for attaching the stand to the wall, first drill with a 3mm drill, then 6mm, but not through, in order to hide the screw head. Then we round the corners with sandpaper.

Step three.
When the base is ready, you can start making paws, which, with their design, will not allow the phone to fall.
To make paws, as it seemed to me, is best from the parquet that I found in my garage.

At first it was conceived so that the paws were composite, that is, assembled from two parts.

But due to the loss of strength with such a connection, I decided to make them solid. The result is such a foot in the form of the letter G.

There are three such paws in my design.

Step four.
At first, I did not attach much importance to the appearance, but in the course of manufacturing I realized that all sharp edges needed to be rounded off, which I did.

It is best to round sharp edges with coarse-grained sandpaper. Upon reaching the desired result, we grind with a finer grit to remove all teases.
Also, do not forget to sand the main part, since the surface of contact with the phone should be even.
Step five.
After all the component parts are sanded, you can proceed to fixing them to the base.
For these purposes, epoxy glue is best suited, which I have tested repeatedly and has proven to be high-strength.

We stir with matches one to one the right amount of epoxy glue and smear the places where the paws will be installed.

Epoxy glue dries for a long time, but holding the glued parts with your hands for a long time is simply not enough patience. Without thinking twice, I decided that the easiest way to fasten such a design with thread and matches, wrapping a dozen turns around its edges. Due to the large number of turns of thread, everything is held securely, and most importantly, the parts are pressed quite tightly.
We first glue the lower foot in the middle, and then the two side ones.

I had to tinker a little with the side ones, in this case it is better to ask a friend to help, since two hands were clearly not enough to hold two parts, and also wrap it all around with a thread.

Leave everything to dry completely.
Step six.
The epoxy glue has dried up and despite the fact that the width of the touching plane is only 5 mm, the paws hold very tightly.

You can make a small phone stand with your own hands from the simplest materials. Our small master class will help you in your work. Handmade items bring warmth and comfort to your home.

Such a funny cat phone stand is easy to make in one evening. To do this, we need fabric from old jeans to finish the cup, denim or any other fabric for the head, paws and tail.

For work you will need:

1. Denim fabric (stripes of different colors).
2. A piece of bright fabric for a scarf.
3. A little synthetic winterizer or cotton wool for paws, tail and head.
4. A glass of cotton swabs.
5. Bottom cardboard.
6. 4 buttons.
7. Pencil, scissors, needle.

Let's get to work:

Take a sheet of paper and freehand draw a pattern. It's pretty simple, even if you can't draw. The head can be done like this: circle the bottom of your cup from under the cotton buds and step back a little from the edge. Get the head of a cat. Cut out the paper pattern. On it we will cut:

• Head (with ears) - 2 parts,
• paw-hand - 4 parts,
• paw-leg - 4 parts,
• tail - 2 parts.

We select materials:

Here is a box you need to take for work, it just fits perfectly in size:

Next, we will make bottoms for our stand. This chopstick cup has a bottom diameter of 8 cm. Yours may be different. For the outer bottom, we cut out a larger circle of cardboard, and for the inner bottom, 0.5 cm less than the bottom of the glass from under the sticks. Cut out a circle with a diameter of 7.5 cm from denim. Sweep along the edge with a thread, insert cardboard and tighten the thread. The second circle is 1.5 cm larger, cut out of denim.

For the inside of the stand, we take a suitable fabric measuring 12 cm (glass height + allowances on each side of 2 cm) * 27 cm (circumference + allowances of 1 cm). We sew the fabric along the short side. We cut the allowances in the lower part of the resulting lining in several places. We put the inner lining into the cup, distribute the notched allowances so that there are no large folds. You can drop a little glue so that the lining does not “walk”.

We turn the top allowance on the outside of the stand. We also fix it by dripping glue in a circle. If there is no glue available, use tape. Then we must draw the belly of the cat. For the top and bottom, trimmings from the legs are well suited. Lay out the strips and fasten them with pins.

Sew all the pieces along the short side. We put on our stand everything that we sewed. On top of the cup we sew the lining and the top of the product with a hidden seam. Then we sew a large bottom. Make sure it doesn't protrude beyond the diameter of the glass. If the bottom is large, cut off the excess cardboard.

We put the cat pattern on the fabric from which you decided to sew it. Cut out a pattern from paper and fasten with pins to the fabric. Cut out, adding a 0.5 cm seam allowance.

Embroider the cat's face the way you like. You can sew beads or buttons instead of eyes.

We sew the paws, tail and head, leaving small gaps in the seams for stuffing with padding polyester. We turn out the details of the head, paws, and tail. We stuff the blanks with synthetic winterizer or cotton wool.

Sew paws, head and tail to the stand. The paws are sewn on at the top and fastened with buttons.

Sew pieces of denim on the tail.

We tie a bright bow around our cat's neck, you can put a sewn mouse or fish in the paws. If you want to give a product, then a souvenir, for example, a smoking pipe.

How to make a cute and original phone stand out of paper, our small master class will tell. The stand can be made from the base: a cardboard ring left from the adhesive tape, an empty round box of chips, salt, coffee, or a cup of cotton buds.