Venetian plaster in the interior of the living room. Venetian plaster - a wide variety of design options and tricks for work (105 photos)
Reading time ≈ 6 minutes
A backsplash refers to the area on the wall between hanging cabinets and the cooking surface. This is a work area in the kitchen that can serve as both a protective function of the wall area from dirt and a decorative one. With the help of an apron, you can place the right accents in the interior, as well as play with lighting.
The material of this kitchen area must necessarily be practical and environmentally friendly. It is very important to know how to attach a functional and attractive backsplash in the kitchen. PVC material, of course, will not be able to compete with the usual tiles or tiles, but it will perfectly suit any interior.
Features of PVC
Recently, PVC panels are often used to decorate the kitchen area. They decorate the walls and floor, zoning areas in the room. PVC panels are made of durable polyvinyl chloride (a special chemical compound consisting of carbon, hydrogen, ethylene and chlorine). This compound is environmentally friendly and safe, therefore it is suitable for premises where food is prepared.
Externally, it is a flat surface painted and varnished, connected by small honeycombs and stripes with the same surface on the other side. On the cut, the honeycomb is perfectly visible and clearly visible. The entire panel looks airy and light, but it is quite tough and durable. A special feature of PVC is its resistance to sudden thermal changes.
You can buy PVC panels in a specialized store, there are several types of them:
- In the form of a PVC Panel - width from 15 to 50 cm, while the length can reach from 2.6 to 3 meters. Sometimes you can find such panels with a length of 4 to 6 meters. The thickness of the panel itself is about 1 centimeter.
- PVC Sheet - Sheets with a matt or glossy surface. The width of such sheets is from 80 to 203 centimeters, the length is from 150 to 405 centimeters. Not a single seam is clearly visible, the surface is decorated decoratively.
- In the form of a Lining, PVC is a long plastic strip, the width of which is from 10 to 12, 5 centimeters. There are both plain lining and stripes that imitate various natural coatings, also with patterns.
Is PVC sheathing suitable for a kitchen apron
To understand how to fix a plastic apron in the kitchen, you need to carefully analyze the issue of using this material for a specific functionality. In order for the panels to serve for a long time in conditions of humidity and temperature changes in the kitchen, stabilizers are added to their composition during manufacture. This chemical composition is completely safe for humans. In addition, the panel material will not be flammable. The advantages of PVC can be enumerated for a long time:
- Repair work is carried out quickly and easily, there is no strong dirt and construction dust.
- Installation of panels is possible both on a prepared base and on bare walls.
- The material is moisture resistant and does not require special care.
- A wide range of panels in stores with various designs and decor.
- Nice and affordable price.
A kitchen apron is often the main accent and ideological center in kitchen design, so it is always in sight. Sometimes a bright drawing or a thematic pattern is placed in this area in order to delight all family members and guests during tea drinking. PVC panels can be decorated with painting, prints, lettering or just a play of color. The style can also be chosen according to your taste: country, imaginary, ethno or Provence. If you are a creative person and have the opportunity to apply a drawing on the surface of the material with your own hands, first buy white panels, paints and varnish.
If you decide to depict or place a large drawing on the apron, do not overdo it. It is advisable not to cover another wall with the same pattern, since the excesses will no longer be appropriate.
To understand how to attach an apron made of plastic in the kitchen, and at the same time save money, proceed as follows:
- You can cover the surface of the panels yourself with a special film with a selected pattern or a mirror surface.
- You can paint on the panels with acrylic or oil, depicting any drawing or pattern. They also use blanks and stencils for pre-selected prints.
- To use self-adhesive tape, the panels must be thoroughly cleaned from dirt and degreased. It is necessary to glue carefully and slowly.
The process of attaching PVC panels to the walls
The technology of fixing panels in the area of the kitchen apron is simple, and the process itself does not take much time, so the help of a professional is not necessary. Fastening is done in two ways: on a pre-made frame or directly on the walls:
The PVC panel is well suited for the kitchen to decorate the apron, and how to fix it, you can see in this video.
Elimination of damage
In the process of work and use, problems may arise, or the apron may lose its original presentable appearance. You can always fix the damage, the main thing is to follow the rules.
PVC panels are a practical and environmentally friendly material. It does not differ in durability, but with proper and careful care it can last up to 10 years.
In the kitchen, it is very important to choose the right finishing material for the work area. It is the part of the wall that is located between the worktop and wall cabinets that most often lends itself to contamination. Drops of water, grease, soot constantly fall on it during cooking, therefore, a kitchen apron is very often mounted from This material meets all the requirements, has an aesthetic appearance and a relatively low cost. However, in order to make the unambiguously correct choice, it is necessary to familiarize yourself in detail with the advantages and disadvantages, as well as the technical characteristics of plastic.
Criteria for choosing a material for a kitchen apron
Before proceeding with the repair, the question arises before everyone: "What materials should be preferred for finishing the space?" Appearance alone will not be enough here. It is necessary to calculate all the financial costs that may be needed to purchase materials. And also the whole range of work: some of them can be done independently, and for some you can hire professionals. However, these are not all of the criteria that influence the choice of cladding. The kitchen is a specific space, therefore it is extremely important for it to take into account such properties as unpretentiousness, durability, safety, practicality and reliability. And the most suitable solution will be PVC panels that fully meet these requirements.
Choosing for a kitchen apron
Polyvinyl chloride (PVC) is a modern material used for manufacturing Thanks to high technologies, it became possible to give them different colors, apply original ornaments and patterns, as well as different sizes. According to the last parameter, they can be divided into three main types:
- Sheets. Their surface is even and smooth, it can be either matte or glossy. Standard sizes: length - 1.5-4 m, width - 0.8-2 m. Sheets have proven themselves from the good side, rightfully considered a reliable and practical type of finishing.
- Panels. The most popular and demanded cladding. Their assortment and variety allow you to easily choose the right option for any interior. A kitchen apron made of PVC panels differs from others in seamless installation. Most often they use standard sizes of 50 x 60 cm, but you can also find those where the length reaches 3 m.
- The lining is an original type of finish, which differs from others in its narrow width of 10 cm. The color range is mainly monochromatic.
Characteristic features of plastic panels
Those who want to save a little on an apron can and even need to opt for PVC panels. The features of this material allow not only to reduce financial costs, but also to cope with their installation on their own. The installation itself will not take much time and will be done without unnecessary dust and dirt.
Advantages of a plastic kitchen apron
By installing an apron in the kitchen made of plastic (PVC panels), you can solve several problems at the same time, since the advantages of this type of finish are numerous. Let's list the main ones:
- Prevents dust and moisture build-up directly under the panels. And this, in turn, protects against the growth of bacteria and fungus.
- Seamless assembly facilitates maintenance and keeps the surface impeccably clean.
- A huge number of design solutions, various patterns, colors and textures.
- A backsplash panel is inexpensive, its price is so attractive that it is suitable even for families with a small budget. If you purchase material with photo printing, then it will cost 1000-1500 rubles. for one unit, and monophonic ones are much cheaper.
- Certified panels are completely safe, even when exposed to high temperatures. They do not contain harmful substances, so they do not release them during melting.
- Possibility of partial replacement of one or several panels, if the installation was carried out on special fasteners (bolts).
- Ease of maintenance. It is enough to wipe the surface with a damp cloth with a little detergent.
- The material does not absorb odors at all, which is very important for the kitchen.
Let's move on to the disadvantages
A kitchen apron made of PVC panels, like any other material, can have drawbacks. However, this does not mean that it is not suitable for cladding. You just need to know certain points in order for the panels to please the eye for a long enough time and there is no need for frequent repairs.
Cons of PVC panels:
- Do not use coarse brushes, especially metal ones, as they leave scratches.
- Subject to mechanical stress, with a strong impact, the surface may deform.
- Melting point features. A kitchen apron made of PVC panels should not be placed close to an open fire, as this can provoke a fire. Therefore, in this area, it is necessary to additionally clad the wall.
- Cheap models can emit harmful substances.
Installation features
The kitchen apron made of PVC panels can be fixed in several ways.
Option 1 - for profiles
First, you need to attach the wooden beams to the wall. The distance between them should correspond to the width of the panel. Self-tapping screws are used for fastening, and after installation, their hats are decorated with special devices (plugs). This method is more often used for unprepared walls, on which irregularities and drops are pronounced.
Option 2 - for glue
Before choosing this installation method, it is necessary to carry out preparatory work. They consist in puttying and priming. After that, along the perimeter of the panel and in the center, they are coated with glue and pressed tightly against the wall. It is better to give preference to polymer adhesives, for example They set quickly enough and subsequently create a strong connection. However, it should be noted that dismantling, if necessary, will be rather difficult, and, as a rule, it will not be possible to remove the entire panel.
Option 3 - direct attachment to the wall
This installation method, like gluing, will require careful leveling of the wall surface. After that, holes are made in them and dowels are installed, their location must exactly correspond to the four corners of the panels. And the last step is direct fastening with screws.
A kitchen apron made of PVC panels is an excellent finishing solution. Its diversity allows you to give the space an unusual and extravagant look. And if it is decorated with LED backlighting, then such a move will significantly enhance the effect produced, and such a kitchen will not leave anyone indifferent.
A plastic apron for the kitchen is a great alternative. A fairly budgetary and quick option for decorating the kitchen, while the installation can be easily done independently. In addition, you do not have to live in the field for a long renovation. All work is carried out with a minimum amount of dust and dirt. If necessary, the old panel is quickly replaced with a new one.
An apron in the kitchen is an irreplaceable design that will help keep the walls from splashing while cooking or cooking. The wallpaper will quickly lose its original appearance, and styling can take a whole week. The most practical solution is to install an apron.
The most practical and inexpensive is plastic. Consumables for installing and fixing the panel are inexpensive, installation will take a short time. The apron is easy to maintain. The only thing he fears is scratches. Therefore, when cleaning, it is not recommended to use abrasive substances and metal sponges.
The main parameters of plastic panels for the kitchen
To choose the optimal size of the apron, it is important to determine the location and. The standard distance from the floor surface is up to 85 cm.It is desirable that the tabletop cover the apron by at least 1 cm.Thus, the optimal distance from the surface to the lower border of the apron is 84 cm.
All other parameters depend on the arrangement of the kitchen. The ideal height of the wall panel for the kitchen is from 55 cm to 65 cm, depending on the installation of the wall cabinets. The upper border of the apron should also be hidden behind hinged structures at a distance of at least 1 cm.
If it is not provided on the wall surface, and the cabinets are placed in one line, then the apron will be in the form of a rectangle with a width of 57-67 cm. The length of the panel depends on the size of the kitchen.
| Photo | Description |
 | For small aprons, it is not advisable to use photo printing, which will simply hide in a small area. |
 | The option with a calm design of both the apron and the entire interior as a whole does not look interesting either. Everything merges. To revitalize the interior, you need to make one bright accent. |
 | Mirror and glossy surfaces always look advantageous in the interior, but you need to be prepared for frequent maintenance. Any droplet will immediately catch your eye. |
Where to buy plastic kitchen panels, prices and photos of ready-made options
With a ready-made apron design plan, you should contact large hypermarkets specializing in construction products. They have the largest selection.
You can buy an inexpensive plastic apron for the kitchen in small retail outlets, their price may be lower than 250 rubles per 1 sq. m. As a bonus, they can offer delivery of the apron to the address.
The price of the product depends on the way the pattern is applied to the surface and the thickness of the panel. A quality product will cost more. You can apply an individual pattern, which will also slightly increase the cost of the apron. If the budget is limited, you should choose from ready-made samples in stores.
Calculator for calculating the required area of a kitchen apron
Each kitchen has a certain section of the wall, located between the cabinets (wall-mounted and floor-standing) and the stove, sink, work surfaces and various electrical appliances, which needs to be protected from common contaminants during cooking. A kitchen apron is a structure that is installed in this space to protect the wall. Today, the most popular is a plastic apron for the kitchen, as it is quite practical, durable, easy to clean and can become a real interior decoration.
Features and Benefits of Plastic Kitchen Aprons
Plastic panels for the kitchen, of which an apron is often made to protect the wall, have many advantages, in particular:
- The material is highly resistant to moisture, which is a very valuable quality for kitchen coverings. Thanks to this, plastic panels can be installed even in the space behind the sink, without expecting deformation during operation.
- The surface of the plastic panels can be coated with any color, which allows the apron to perfectly fit into the overall design of the kitchen interior. In addition, modern technologies make it possible to apply all kinds of decorative elements, even paintings and photographs using the technique of photo printing.
- The installation of the apron is not particularly difficult, so you can handle this process yourself, which allows you to save a little on repair and decoration costs. An important point is that due to the ease of installation, the panel can be very quickly replaced with others, for example, if you want something new.
- The working panel, finished with plastic, can withstand rather high temperatures (up to 80 ° C), so the panels can be safely installed behind the stove, which allows you to protect the wall from splashing boiling dishes.
- It is very easy to clean the surface of plastic from grease and other contaminants. Any mild cleaning agent can be used for this.
- The size of the panels is different, they are lightweight, do not create unnecessary stress on the kitchen walls.
- An important advantage is the low cost of this material, which allows you to decorate the kitchen not only beautifully and functionally, but also profitably.
Types of plastic for kitchen aprons
The modern market for building and finishing materials presents a fairly wide selection of panels in this category, so it is worth considering in detail the main types of plastic for a kitchen apron. These include:
Kitchen apron made of ABS plastic
Aprons for the kitchen from ABS - acrylonitrile butadeine styrene. Most often, the size of such panels is 2000x600x1.5 cm or 3000x600x1.5 cm. A kitchen work machine made of ABS can look very beautiful, due to the fact that these panels are decorated with photo printing. It is this type of plastic that can be called the most in demand today, since it is an excellent alternative to some materials that have a high cost. Also, this plastic has many advantages, for example:
- It weighs much lighter than heat-resistant glass and therefore does not place stress on the wall.
- The coating is resistant to not only common household chemicals, but also mild abrasive preparations.
- The material is completely environmentally friendly and safe.
- Textures and design options are very diverse, which gives consumers some freedom of choice.
Of course, like any finishing material, ABS panels have some disadvantages, in particular:
- The color of the plastic without a topcoat and design is yellowish.
- Such an apron cannot be brushed as it may damage the coating.
- The applied design can quickly fade if the kitchen work wall is in direct sunlight or has additional lighting.
- Do not allow solvents and products containing acetone to come into contact with the panels.
- In most cases, you have to make an individual order for the design of the apron, which increases the overall costs.
Kitchen apron made of PVC panels
Kitchen apron made of PVC - polyvinyl chloride. A plastic apron for the kitchen made of this material can be called, perhaps, the most unfortunate option. When selling it, store consultants and sales agents emphasize the pros, but they are silent about the fact that each of the benefits of coverage has a downside, and this makes them controversial.
The sizes of these panels are different. Their width can be from 15 to 50 cm, thickness from 0.5 cm to 1 cm, and length 2.6 - 2.7 meters or 3 meters. In this case, the service life of the material directly depends on the thickness and hardness of the plastic, the thicker - the longer it will last.
The main advantage of PVC panels is their very low cost, on which many consultants focus the attention of the buyer. But this fact can be considered a plus only relatively. The panels remain in good condition for about six months, after which they need to be replaced. Many experts compare this material to disposable or plastic dishes due to their poor quality. Therefore, in most cases, you have to buy them twice a year.
The second plus is considered to be easy installation, the ability to install aprons with your own hands without any problems. But here it must be remembered that when replacing the panels, they will need to be dismantled. Most often, the fastening of such aprons is carried out using liquid nails, therefore, with all the ease of installation, it is not so easy to remove them from the walls, as well as to clean the surface of the adhesive structure.
But there are also frank disadvantages here, for example, the fact that the material is afraid of high temperatures, and therefore it cannot be used to decorate the space behind the stove and in other hot zones. This will require the use of a different coating, which makes the purchase of PVC panels simply pointless.
The second very important disadvantage is the non-environmental friendliness of the material, which is most pronounced when heated. Reputable manufacturers have significantly higher environmental performance indicators than cheap and low-quality materials, but their cost will be higher. However, even these panels retain another important disadvantage, which is the rapid tarnishing and erasure of the applied decor.
Polycarbonate kitchen panels
Polycarbonate is a special environmentally friendly plastic consisting of carbonic acid and phenol, which has a universal purpose due to its technical characteristics and features. Polycarbonate is used in construction and finishing works.
Polycarbonate panels can be honeycomb or monolithic. The dimensions of the produced honeycomb materials are standard and are 300, 600 or 1200 cm in length, have a width of 210 cm, and their thickness varies from 3 to 40 mm. The internal structure of the panels has 3 options and is three-, two- and single-chamber, while the strength of the material is directly related to the number of chambers.
As for monolithic slabs, their length is 3.05 meters, and their width is 2.05 meters, with a thickness of 1 to 12 mm. In most cases, such panels are used as a substitute for quartz glass where increased strength requirements are imposed on the material.
Polycarbonate plastic panels for the kitchen can be called one of the best options, since this material is very durable, looks like glass, it is transparent, but is not afraid of impacts. Such an apron will not fade in the sun, it is not afraid of high temperatures, which allows you to install it along the entire length of the kitchen work wall.
Of the minuses, it can only be noted that polycarbonate is still plastic, therefore it is afraid of scratches, like any other type of similar material, therefore it is not recommended to clean it with a brush and coarse sharp objects.
Plastic lining
Lining PVC (polyvinyl chloride) is a long plastic strip, the width of which is from 10 to 12.5 cm.The surface of such strips can be either completely smooth and monochromatic, or imitate various natural textures, patterns, but mostly light monochromatic shades prevail ... The length of the plastic lining is 3 meters.
The material has all the characteristics, pros and cons of polyvinyl chloride, but it also has its own personal drawback. When using lining, the kitchen work wall has to be sheathed with it, which requires a lot of time and accurate calculations. The finished apron will not have a solid look, because stripes will remain at the joints of the panels. The presence of joints when installing panels in the kitchen has its drawbacks, because such an apron will be difficult to clean, especially if dirt gets into the junction.
Types of decor of plastic kitchen panels for a work wall
To decorate a plastic kitchen apron, you can use different options, including showing your own imagination, for example, by making hand-made art painting using high-quality acrylic paints. Today, this design is one of the latest fashion trends.
The main method of drawing pictures on plastic plates can be called photo printing, which allows you to create almost any kind on the surface of the working wall. But here it is important to choose the right decoration option so that the apron fits well into the overall interior of the kitchen, becoming its decoration. Decor options can be as follows:
- Drawing from berries and fruits. They are to the liking of many people, pleasing to the eye and cheering up with the richness of colors. But it is worth stopping your choice on such a fragment only if the walls of the kitchen have a neutral tone, and the furniture is simple lines and shapes without patterns and bright colors. In this case, a kitchen apron with fruits will become a real decoration. But with classic carved furniture and colored walls (cabinet doors), a good combination will not work.
- Floral drawing. This design, as in the case of fruits, will look perfect when combined with a neutral color of the walls and simple, smooth, even furniture in light colors. You should not choose a floral pattern to match the overall color of the kitchen, since in this case there will be no accent in the interior.
- Natural textures. Most often in this category there are imitations of wood or natural stone, but it is very difficult to fit them into the kitchen interior, making an accent. As a rule, such a decision looks too strict and unnatural. Avoid combining such decor with marble countertops.
- Mirror plastic apron. This option is an excellent solution for decorating a small kitchen, as it visually expands the space. In order for the mirrored surface not to create unnecessary stress on eyesight and does not lead to stress, the overall interior of the kitchen should be designed in calm and light colors with an emphasis on bright little things, for example, a bouquet of flowers or a painting. But such a coating also has a significant disadvantage - every even small droplet is always visible on the mirror. Such an apron must always be kept perfectly clean, and for this it will have to be constantly cleaned and rubbed, which plastic panels do not like very much.
Installation methods for plastic kitchen aprons
It is not difficult to mount a plastic apron for the kitchen with your own hands, so you can cope with this task yourself. Today, plastic plates can be attached in several ways, each of which has its own characteristics.
Most often, a plastic kitchen apron is attached using liquid nails or other types of glue. It is simple, very fast, does not require the use of special tools (except for a glue gun), but this method can be used only if the working wall is flat. Plastic is lightweight, modern adhesive solutions set very quickly, so it is enough to apply glue, install a decorative element, press it tightly and hold it for several minutes. But before using this particular method, you should think about the fact that it will be very difficult to dismantle the panel in the future.
The second mounting option is to mount the decorative element on self-tapping screws. If the walls are flat, then this method can be called optimal. It does not require serious efforts, does not cause unnecessary costs, does not create problems when dismantling is necessary. Of course, after screwing in the self-tapping screw, damage remains on the surface of the decorative plate, but today this problem is easily solved, because there are many different decorative plugs on sale that allow not only to hide this defect, but also to decorate the apron.
The third installation option is the installation of plastic on the crate. You can use this method if the wall surface has strong irregularities and distortions that need to be hidden. But it should be remembered that in this case the decorative panel becomes more vulnerable, since some space remains behind it. For this reason, the plastic can crack if accidentally hit. To prevent this from happening, when installing on a crate, you need to choose thick plastic plates that have a higher strength or just level the wall.
[email protected] site
P.S. We do not sell furniture, we only help you get acquainted with what happens and navigate in the choice.
