Table for welding work drawing. How to make a do-it-yourself welder's table

When welding small parts, there are problems with their fixation. Subsequently, they will affect the quality of the seam, the reliability of the connection. For the solution, special tables are made, the design of which is designed to increase the convenience of the welder. It is important to choose the right drawing and draw up an assembly diagram.

Table drawings

The problem of self-manufacturing a table for welding is the minimum information about such structures. Factory models cannot serve as a basis for drawing up a drawing, as they are complex, many functions are not applicable in a home workshop. The alternative is to take the simplest drawing as a basis and improve it.

do not install wheels, as they will affect stability;
on the working welding surface, make longitudinal slots (30 mm) with your own hands to fix the clamps;
install an inclined plate under them to protect the tool from sparks and scale;
installation of lifting sidewalls to increase the working surface of the table.

The result should be a similar device for welding:

Materials and accessories

For the manufacture, you can use any available metal-roll - corners, pipes of a profile section, sheet material. It is important that the welder's table be stable, withstand not only the weight of the workpiece, but also the possible increase in pressure on the surface during work.

Tips for choosing materials:

Support legs (legs). They are made from a profile pipe or a corner, the first option is preferable, as the mechanical strength increases. Thickness - from 1.5 mm and more;
Working welding surface. Steel plate with slots for clamps, thickness - from 2 mm. The edges are rounded to make a flat surface.
Additional designs to increase the working area of the table from square or round tubes.
The protective screen is made of sheet iron, preferably with sides.
The bottom shelf is made of fiberboard or chipboard. For better protection, you can put a thin steel sheet.
Stiffeners - corners or pipes.

Additional primer and paint will be required. It is better to process the desktop - this will increase its service life.

Assembly order

To perform the work, you will need a welding machine, electrodes, a “grinder” with metal discs, a measuring tool, bolts for fastening. A design drawing is preliminarily drawn up, the dimensions of the blanks are calculated. In the latter case, the thickness of the weld must be taken into account.

Assembly instructions:

Formation of blanks, checking their dimensions according to the drawing.
Assembly of the frame, welding of the support legs, fastening of the stiffeners.
According to the dimensions of the finished frame, a worktop is made. After measurements, it is not fixed.
Protective screen installation. The angle of inclination is up to 45 °, an additional chute is made for pouring welding waste.
Installation of the main work surface.
The manufacture of sidewalls, they are attached to the structure on hinges. Movable stops from pipes of small diameter.
Priming and painting.
Installing a sheet of fiberboard or chipboard.

Additionally, hooks, boxes or boxes for storing and fixing tools can be installed on the welder's table. The choice depends on the requirements for functionality and ease of use.

What else is needed to complete

To create the most comfortable working conditions, you will need to buy additional tools for the welder. Their function is reliable fixation of the workpiece, the ability to quickly change the position. Requirements - resistance to temperature extremes, mechanical strength.

A set of additional tools:

Clamps. Necessary for fixing the workpiece on the surface for precision welding;
Clamps. They perform the same function, but more specialized - you need to install an angle between the parts to be welded, a complex connection.
Magnetic base. It is recommended for the processing of small parts, the fixation of which is difficult mechanically.

In the latter case, the mass of the auxiliary magnetic tool and the maximum allowable weight of the part must be taken into account.

The video material provides a detailed overview of the optimal table model for a welder:

High-quality welding of two parts is quite simple if, in addition to a good electric device and a mask with an LCD regulator, good electrodes are bought, and all work is done on a comfortable welding table. You can buy a steel workbench for welding in a supermarket or a specialized salon, but a more convenient and rational option would be to make a welding table with your own hands for individual preferences, height and arm length.

Types of welding tables

Most do-it-yourselfers are absolutely sure that you can work with a welding machine on a regular workbench or even on a concrete floor. Experienced craftsmen are able to work with a welding inverter, as they say, “on their knees”, but even they prefer to work on a special table, especially if you need to make a complex spatial structure.

For work using welding at home, four main models of tables are mainly used:

All tables for electric welding, regardless of the scheme, are made of structural steel, most often by welding or using bolted connections. On the side surface of the tabletop or on one of the legs of the table, a contact pad is cut or welded, to which the zero clamp of the welding machine will be connected.

It remains to lay the workpiece on the table, connect the welding to the network, and you can cook the metal. This is much more convenient than trying to weld the part on a concrete floor or on bricks, when the lion's share of the time has to be spent looking for a place to connect the zero clamp.

Welding table requirement

It is impossible to make a welding table according to an arbitrary scheme; when choosing a scheme and a base device, it should be borne in mind that you have to work with molten and spattering metal and an electric arc of one and a half hundred amperes. Therefore, the design must comply with clearly defined requirements:

The base and the tabletop are made only of a tubular profile, the tabletop and the entire structure must be massive enough so that hammer blows or an accidental push, falling parts on the work surface do not lead to the overturning of the structure;
Steel legs or supports must be tied with a lower horizontal strapping from a profile pipe or corner. Thus, it is possible to avoid loosening or deformation of the structure when installing very heavy or large parts on the workplace;
The working surface is equipped with a lattice deck, through which hot slag and metal drops freely, without ricochet, fall into a tray with sand or onto a concrete floor;
The place for carrying out welding work must be equipped with an exhaust hood. If welding work is carried out irregularly, then the metal structure is made mobile or portable, for example, it is installed on steel wheels with a rubber braid or on rubberized nickels.

Note! If the welding table is planned to be used for outdoor welding, the supports must be insulated with getinaks, rubber or any other dielectric without fail.

If the working or welding plane is sewn up with a solid metal sheet, then the lower tier of the workbench can be equipped with a grid or a shelf for storing tools. In professional models of welding fixtures, lodgements in the lower tier there are footrests or mounting hooks for storing electrodes, hammers, brushes and marking tools.

Welding table design

The device and scheme of the workbench must be selected depending on the height of the person, the nature of the parts to be welded, dimensions and weight. The following factors are considered to be the most significant conditions that ensure comfortable work and handling of the welding machine:

Welding table height. In standing conditions, the worktop or work surface should be at the level of the welder's belt;
Table top dimensions. As a rule, for professional work, the width and length of the working surface is 70-75 cm. The maximum welding accuracy is achieved if the welding zone is removed no more than ¾ of the length of the welder's hands;
Welding table dimensions to work in a sitting position, it can be copied from an ordinary home stool or chair, but in this case, the device has to be equipped with a protective screen to a height of 70-80 cm in order to avoid sparks and hot slag from getting on the worker's legs and clothes.

Welding and assembly tables

Workbenches and tables used for simultaneous installation and assembly and welding work conditionally fall out of the general range of welding equipment. Ordinary tables, stands and workpiece holders are made, as they say, in the format of a bedside table, a small square tabletop provides convenient access to parts from any side.

In terms of dimensions and arrangement of the table top, welding and assembly tables are closer to locksmith workbenches.

The working surface is made of thick sheet metal with drilled holes for the installation of clamps, mounting clamps or measuring tools.

Additional devices for fixing workpieces can be located on the tabletop, for example, when welding bulky parts made of thin rolled products, it is necessary to install lodgements, base plates, and tripods on the table to ensure reliable retention of the edges to be welded until the assembly work is completed.

Rotary welding table

The turntable is more like a piece of industrial welding equipment. The working surface is made in the form of a solid metal disk with a fireproof heat-resistant coating, raised above the table frame. The free outer edge of the disc allows you to fix the parts to be joined in any place of the welding fixture.

As a rule, special beacons or markings are applied on the tabletop, which allow the axis of rotation to be aligned as accurately as possible and to avoid the beating of the weld during the rotation of the part. This is the most complex version of the welding fixture, but sometimes you simply cannot do without such a table. For example, if you want to weld an annular seam on a cylinder, a round body of a potbelly stove, connect the blanks of two steel pipelines. In this case, the welding table is necessarily equipped with a rotary belt drive. By rotating the worktop, the welder can weld a heavy seam without changing his position relative to the fixture, which is very important to ensure high quality welding.

Simple welding table

The simplest version of the table can be made according to the scheme shown in the photo. From two segments of the I-beam No. 70, the base of the frame is welded. Legs 60-65 cm high can be made from a square profile pipe. For the manufacture of countertops, you will need ten meters of an I-beam No. 50 or five profile pipes 40x60 mm.

The pipe is cut with a grinder along a short edge into two halves, polished and welded onto the finished frame.

The result is a very reliable and comfortable welding table, on which you can perform most of the welding work.

Semi-professional welding table

To perform welds in products of a higher level, a welding table of a more complex device will be required. One of the models of modern devices is shown in the photo. Structurally, the table differs from any other only in the presence of height-adjustable supports and a table top of a special device.

The working surface is made of perforated slats. A set of steel corners will provide reliable fixation on the welding table of the product, even the most complex configuration.

Necessary tools and materials

To make a full-fledged welding table, you will need a profile pipe 70x70x3.5 mm, a set of roller bearings and a sheet of thick metal. Of the tools you will need a welding inverter, a table saw for cutting metal and a marking tool.

Metal cutting can also be done using a manual grinder, but it will not work to get the much-needed perfectly right cutting angle, so you will have to cut the profile pipe and strips of the table top using a table or stationary saw.

Drawings of the welding table

The design of the welding table consists of two main parts - the support frame and the tabletop. The frame can be made from a channel or a pipe, if the welding table is supposed to be made mobile, then it is best to use a profile pipe or a steel corner.

The frame of the welding table is reinforced in the lower part with an H-shaped strapping made of a profile pipe.

For stationary welding tables, the worktop and protective box are best mounted on a brick frame. The most unusual variants of the welding table are in the form of a folding structure or a folding table mounted on the wall of a garage or workshop.

Most often, for an ordinary garage or workshop, a welding table is made with a sheet metal worktop. In this case, it can be used for both welding and plumbing or repairs. Therefore, the corner zones of the working plane are used to install metalwork yews, devices for cutting and drilling metal. In fact, the best option for a welding table for homework is a combination of a bench for locksmith work with a few additions to connect a welding machine.

Making a welding table

The process of making a table begins with cutting the purchased square pipe. The frame and frame of the table are made of a square tube 70x70 mm. It depends on how accurately the cutting and assembly of all frame parts will be performed whether the entire structure will be sufficiently stable.

Table legs

The first cut four pieces of square pipe 80 cm long will be used to make the support legs or legs of the welding table. Pre-pipe blanks are assembled on a steel plate in one package, cut and trimmed so that the length of all legs is maintained to the nearest millimeter.

The supporting part of each leg must be provided with a thick metal plate on which swivel wheels or rollers will be attached. Cut out of steel - the fives of the plate are immediately drilled under the fasteners of the wheels and welded onto the legs.

According to the selected dimensions, we cut out the details of the supporting part of the frame of the welded table.

We align the workpieces laid out on concrete at the corners - calibers and fix them with clamps. We weld the frame with semiautomatic points or conventional electric welding.

After the metal parts have been stuck with small welds, it is necessary to allow the structure to cool and check the geometry of the legs again. It is necessary that the racks are in a strictly vertical position, and the distances between them on opposite sides differ by no more than 1-2 mm.

The next step is to make the lower tier of the table. Its design is somewhat different from traditional corner tying, as is done in the case of assembly for carpentry and locksmith workbenches.

The frame of the welding table is reinforced in the lower part with an H-shaped strapping made of a profile pipe. This design of the lower tier provides a comfortable setting of the legs when working with parts laid on the welding table. Nothing prevents the transfer of the center of gravity far forward, as a result, it becomes possible to weld the most complex and thin products.

Countertop manufacturing

After cleaning the parts from scale and installing the support rollers, the frame of the welding table is painted with heat-resistant paint. The tabletop is best made from a steel sheet with a thickness of at least 5 mm. The large thickness of the metal ensures that the working surface does not deform and does not give out a bubble when heated strongly.

The table top plate is cut out according to the drawing and laid on the finished frame. Before welding, it is necessary to check for gaps and adjust the support points so that the tabletop rests on all four points of the base. The metal plate is fixed with a clamp and welded to the frame with a carbon dioxide semiautomatic device.

protective box

The main enemies of an experienced welder - dust, slag and scale inevitably accumulate on the desktop. Sometimes emulsion residues and large drops of molten slag must be removed from the countertop before the work is completed.

For these purposes, a protective box is added to the countertop; it can be made of galvanized steel or ordinary roofing metal. The place for installing the protective box on the table is selected depending on the preferences of the welder.

Safety in the performance of welding work

When carrying out welding work, first of all, you need to be extremely careful to avoid electric shock and poisoning when welding parts with zinc or cadmium coating. For safe work, a sheet of asbestos or getinaks is usually laid on the table, on which you can lay the welding key without turning off the inverter.

Conclusion

The manufactured table meets all the requirements for industrial equipment and tooling when working with any type of welding. For safe work, you will need to add a rubber mat, a tool box and a properly functioning ventilation system and autonomous lighting to the table.

A metal table is able to complement any interior, regardless of the style in which it was made. For example, it can be advantageously placed in a high-tech kitchen or placed in an attic. If you do not have the opportunity to purchase a finished branded product, do not despair. If you wish, you can create a beautiful metal table with your own hands by reviewing the helpful tips below and carefully studying the photo with instructions. The information below will help you understand the existing types.

If you decide to make a table with your own hands, you should know the following: the tabletop can be made from various types of materials: plastic, glass, metal or wood. To combine individual elements with each other, the masters recommend using a welding machine for this purpose.

Wooden top Plastic Glass

The base also differs: it can be created from straight metal blanks fastened together (for example, pipes) or bent products, forged metal.

Profile metal table Wrought iron table

To date, the following types of metal tables are distinguished:

a workbench, that is, a desktop for plumbing work, which allows you to carry out a variety of actions with wood and other types of building materials;
forged table;
side and ergonomic table made of metal;
coffee table on a metal base.

Workbench Wrought iron table Sliding table Coffee table

View photos of various models to make the right choice and create the perfect metal table at home.

What do you need to build furniture?

If you are planning to create a table for your home with your own hands from metal, then you will need the following types of materials:

metal profile (instead of it it is allowed to take rolled metal);
primer and paint for processing metal surfaces;
tools for uniform distribution of liquid substances (brushes and rollers will come in handy);
chalk and a smooth surface (this is useful for creating a template);
countertop, as well as bars and adhesive for its secure fixation.

You can not do without special tools:

welding fixture;
a grinder equipped with a metal brush (if it is not available, it is allowed to use a metal brush without a grinder);
saw for working with metal;
a hammer;
screwdriver;
fasteners, in particular, bolts and self-tapping screws.

You may need additional devices, it all depends on which option you prefer.

How to create a table from a profile pipe?

Creating furniture from a profile pipe with your own hands is not so difficult. View the photos on our website to decide how the finished model should look, and then get down to business.

1 2 3

The process consists of the following steps:

Find suitable metal corners. We weld them in such a way that we get a regular triangle. We create an identical figure from tubes, the length of which is 38.5 cm.
Using a drill, he makes holes in the frame, due to which the frame will be attached to the countertop.
We bend metal tubes (length 73 cm) with a hammer, holding the workpieces with a vise. You can not work with the legs, you can not touch them, however, then their end parts will have to be separated at a certain angle. We attach the table legs prepared in this way to the frame, and attach the metal balls to their ends. To weld individual steel elements, it is recommended to use specialized equipment. Only it is able to provide a high-quality connection of welded elements.
Cut out the countertop using the right material. We process the extreme parts with sandpaper (you can also use a grinder for this purpose). We attach the workpiece to the legs using fasteners. We insert the screws into the holes made on the iron frame.

This work can be considered completed. Please note that the tabletop can be made from various materials. This factor has an impact on which mounting method is better to choose. Sometimes people create unique countertops based on corrugated board, the process of creating such a product is quite complicated, and therefore it is rarely chosen.

It is much easier to make a tabletop out of plastic or wood, because the listed materials are quite easy to process, in addition, they are quite reliable.

How to make a console type table?

If desired, you can make furniture using the console. Such a product will be a stylish addition to any home, regardless of its size. Finished tables are small in width, therefore, do not take up too much space. Use a quality console to get a reliable and durable interior element.

1 2 3

The process of creating a table is not too complicated, and therefore anyone can create it, even if he is not a carpentry master. If you want to make furniture of this type, then use the proposed instructions:

We purchase all the necessary tools and fixtures, especially the console and mounting hardware.
We make legs, which without fail must be massive and strong in order to withstand a large table. We buy blanks for their manufacture in a store that sells household goods.
We prepare boards for further processing. We take them (parameters: length - 3 m; width - 20 cm) and separate them with a saw. As a result, we get 4 blanks. You will also need the same number of boards, but with different sizes (parameters: length 145 cm, thickness - 10 cm). We install them in a vertical position on the workpiece made. Along the edges we place 4 square blanks with a side of 10 cm. Combine the individual structural elements with screws. We repeat the procedure according to the described scheme to get a couple more blanks (in the future they will form the upper and lower parts of the product).
We attach the legs.
We indent 2.5 cm from the edge, lay the workpiece on top and lubricate with glue for carpentry. We process both sides with an adhesive, and then apply a board on top. We fix the finished workpiece in the place where it is supposed to be with screws.
We form the lower console by repeating the procedure presented above.

1 2 3 4

At the final stage, paint the finished product and decorate the console to your taste. If you're running out of ideas, check out the photos here to find the perfect design for your new DIY furniture.

The construction of such a structure as a do-it-yourself welding table is the right decision. Thanks to this, you will get a place to work and practice. It should be noted that for the manufacture of fixtures it is better to take metal. Wood is not suitable as it is highly flammable.

Where to place the welding table with your own hands? Most often they put it in the garage. has many advantages. For example, grounding can be installed on it, which provides the master with safety.

Functions of the welding table

The do-it-yourself welding table has a unified design. He is:

a plane for work, in which there are clamps for workpieces;
ground loop.

What tools and fixtures will be needed?

Many are interested in how to make a welding table with their own hands. This article will describe the technology of the process. An important point is the preparation of the necessary tools and fixtures.

You will need:

with all accessories (electrical cables, clamps, electrodes, etc.);
pliers;
roulette;
ruler;
a hammer;
three C-shaped clamps;
a hacksaw for working with metal for cutting at the right angle (it is preferable to use an electric grinder);
regular square;
square for carpentry;
wire cutters;
tap for creating thread M8;
machine for milling or turning (it will be needed for chamfering parts).

You can make a welding table with your own hands in different ways. There are two product models.

First option

The do-it-yourself welding table, the photo of which is presented below, has dimensions of 1100x660x900 mm. So that the design does not turn out to be too expensive and heavy, it is made of a thick plywood sheet. In the future, it is covered with a metal plate.

What materials will be required?

You will need:

profile pipe 40x20x2 mm - 9.9 m;
steel strip 40x4 mm in size - 2.0 m;
four M8x40 bolts and four M8-6 nuts for fastening;
one sheet of steel 1100x650x2 mm;
one sheet of plywood 1220x1220x10 mm.

All materials must be free of corrosion. If there is rust, then the surface should be sanded. In order to make a welding table with your own hands, drawings are required.

blanks

Billets are cut from 40x20x2 mm:

for the frame of legs and jumpers - two parts of 1.1 m each, two parts of 0.66 m each, four blanks of 0.9 m each, one part of 0.58 m;
two blanks for foot jumpers, 0.58 m each;
one piece for 1.02m long foot jumper.

Chamfers are removed by means of a milling or turning machine.

Tabletop frame welding

The components of the frame needed for welding are located and fixed by means of C-shaped clamps.
The frame is a rectangle with a jumper. To check the correctness of the assembly, we advise you to measure two diagonals of the rectangle. The permissible error is no more than 1 mm.
The blanks under the frame are connected. First of all, a rectangle is welded, and then a jumper. First, a tack suture is used, then a solid one.
Produced protective treatment grinder.

How to finish the countertop?

The corners of the frame are reinforced with overlays. For the purpose of fastening legs and other attachments, a strip of 40x4 mm in size is used. Facets are removed. Finished parts are welded from below at the corners.
To fix the legs, it is necessary to weld the lining from the strip. In the legs you need to drill holes with a drill D<6 мм, затем по ним сделать аналогичные отверстия D=6,7 мм в раме и нарезать резьбу М8. Их следует прикрепить, затем приварить боковые перекладины.
From the plywood sheet it is necessary to cut the countertop. It is covered with a sheet of steel. Attach layers as needed.
We recommend treating everything with an anti-rust compound.
A design such as a homemade do-it-yourself welding table can be given a modern look. This is achieved thanks to the attached wheels. So the device will be easier to move. Wheels must be equipped with locking devices. Additional parts must be installed on the table to fix the workpieces. A holder for a welding torch can be welded to the upper corner. It can be made from a pipe of the desired diameter.

This design is quite large. It is suitable for welding large items.

Second option

A do-it-yourself welding table can be made in a different way. The second model has a size of 445x750x915 mm. This design is compact.

Required material

Two plates 445x750x3 mm.
Four squares 25x25x3 mm 76 cm long (their angle should be 45 degrees).
Four corners 32x32x3 mm, 91.5 cm long.
One pipe D \u003d 3 cm, the length of which is 7.5 cm.
Four threaded wheel supports.
Four nuts for supports.
Four nuts for connection.
Four lock washers.

Stages of work

The frames of the tabletop and the second shelf are welded. Two identical rectangles are prepared, 76 and 46 cm in size.
The dimensions are being checked. The permissible error is 1 mm.
The parts for the frame are welded with a tack seam.
The correctness of the geometry is checked.
After that, all parts are welded with the main seam.
The countertop and the second shelf are welded. First, the connection is made with a tack seam, and then with a solid one.
The legs are welded to the frame. They are fixed with clamps. They are attached at an angle of 90 degrees. The joints are welded with a spot seam.
In a similar way, the legs are attached to the second shelf, located at a distance of 70 cm from the countertop. After checking the geometric correctness, continuous seams are performed.
Wheel mounts are mounted.
A welding torch clamp is installed in the corner. A pipe D = 3 cm is used, the length of which is 7.5 cm.

What are the precautions?

Everyone knows that welding work carries a certain amount of risk. To protect yourself from any trouble, you should follow a number of important recommendations:

It is necessary to ensure proper ventilation of the place of work. It is advised to install ventilation with an exhaust hood.
Protect against electric shock. To this end, the work should be carried out only in rubber gloves and make sure that they are not wet.
Eyes must be protected from arc light. For this purpose, we recommend using helmets and goggles.
The work table must not be splashed with metal. Before welding, it is necessary to clean the place of work from debris. Particularly dangerous are particles that are easily flammable. If work is carried out in a garage, then there should not be containers with paint or fuel containers nearby.

There are also special protective equipment, without which work is not recommended.

Reading time ≈ 4 minutes

A compact DIY welding table will allow you to organize your workspace and save space. Due to the small design, the inverter and supply cables can be conveniently placed without the risk of mechanical damage. Additionally, the finished table is quite realistic to use for welding. Due to the built-in wheels, it is possible to move the complete table to any convenient place.

Necessary tools and materials

You can make a welding table from a profile pipe, as in the photo, with your own hands without using special equipment. It is enough to have all the necessary materials and a minimum set of garage tools, in particular a grinder, welding, measuring angle, jigsaw, drill and vise.

The design dimensions of the table according to the drawings in the article are: 370x580x780 mm, however, depending on the need, you can use your own overall parameters.

Step-by-step instructions for making a table-trolley for welding

1. Making the table top. The metal welding table is equipped with a lattice cover, which is made of a profiled pipe with a section of 50x50 mm (for the outer frame) and 30x30 mm for the inner lattice. The pipe is cut to size with a grinder. Prepared elements are connected by welding. The outer belt of the lid consists of a profile 50x50 mm, which is welded into a rectangle, taking into account the design dimensions. The internal space is filled with a profile of 30x30 mm. Pipes are welded through 30-50 mm, forming a lattice. Welding seams must be cleaned with a grinder.

2. Making table legs. The legs for the welding trolley can be made from a round pipe with a section of 25x25 mm or 30x30 mm. In the absence of these dimensions, the use of 20x20 mm is allowed. Materials are cut to size (780 mm). In total, 4 metal legs are required. The cut elements are welded to the finished cover at four corners.

Important! When welding the legs to the lid, it is important to control the misalignment. To get the most stable table, it is necessary to ensure even installation angles and the location of the racks. It is recommended to use a square and tape measure.

3. Additional stiffening belt for the table. The metal trolley for the welding machine should be as rigid and durable as possible. To do this, it is necessary to make an additional stiffening belt, which will be located at a height of 200-300 mm from the floor level along the racks. Amplifiers are made from a corner 30x30 mm, which turns outward with an acute angle. Elements are welded in a circle to connect all 4 racks. If necessary, you can additionally clean all welding seams.

4. Making a handle for lifting and transporting. The handle is necessary to conveniently transport the table to any specified location. For the handle, you can use a metal bar or reinforcement with a cross section of 8-10 mm. It is important to initially give the desired shape to the element. In the future, as you can see in the video, the finished handle is welded to the supporting frame of the top cover. It is necessary to weld the handle from below in order to avoid further inconvenience during the operation of the table.

5. Hooks for welding equipment or cables. Side hooks are necessary for convenient fixing of thick cable, holders or storage of any other welding tool. Hooks can be made from an ordinary nail 100-150 mm. To do this, it is enough to give the desired shape to the nails and weld them to the bearing legs from the outside.

6. Wheels for moving. Wheels are necessary for more convenient movement of the table to a convenient place. In total, 2 wheels are required complete with mounting mechanisms. It is most preferable to use small parts from a shopping cart or similar equipment. Before installation, the upper part of the locking mechanism with the nut must be attached to the posts by welding. Next, the wheels are wound onto the welded nut.

Important! Weld fixing nuts for wheels should be horizontal. Details must be on the same level.

7. Niche for tools. The niche should be made of plywood, chipboard or OSB board. If necessary, you can use a solid sheet of metal. The material is cut to size with a jigsaw and placed on the corners at the bottom of the table.

8. Protective cover against debris and scale. For manufacturing, you can use an ordinary sheet of metal of any thickness with a bend along the edge. Previously, a metal bar of 8-10 mm is welded to the supporting legs, while one side must be higher than the other in order to create the required slope. The cut sheet of metal is mounted on bars.