Plates replaceable. Replaceable carbide plates Replaceable plates for wood cutters

We bring to your attention replaceable carbide plates for turning cutters used to process solid materials. Plates are used to snap cutters on machine equipment. Made on the basis of solid alloyed alloys, which ensures a long operational resource. The catalog presents a wide range of products, for snaps of mills of various types.

For which tasks are used carbide plates

Turning and milling are one of the most modern methods of working with solid materials, such as natural wood, MDF, chipboard, as well as metal blanks. Carbide plates replaceable are metal blanks with several faces, the installation of which allows you to perform work on the curly cutting, milling and turning processing of blanks.

Plate configuration, sharpening angle and the number of faces determine the profile of the parts made. From these parameters depends the depth of chips, cleanliness and quality processing. In particular, there are plates for roughing, finishing, grinding blanks. When choosing, it is necessary to correctly select snap to perform the necessary work. For example, standard four-man plates are used for direct or angular cutting of the material. Plates carbide five-marched are used for figure end processing and a number of other tasks.

Advantages of equipment

Turning replaceable carbide plates are made on the basis of high-strength alloys, each of which is optimal for processing a metal, wood or other material. In the description, each product you can find a detailed table of materials, for the processing of which the plate is suitable from one or another alloy.

The advantages of using replaceable plates for milling, turning, the following features include:

• Replaceable design simplifies the operation of the cutter, reduces the depreciation level of the main equipment;
• The selection of the optimal angle of sharpening and configuration of the chips in the faceted plate increases the quality of the processing of parts;
• Affordable price of plates and a long service life reduces the cost of operation of milling, turning equipment.

If you are interested in replaceable carbide plates for cutters, we will find a wide range of high quality products.

Principle of operation of plates

Each plate has one or more mounting holes depending on its size and configuration. With the help of bolted compounds, the plates are mounted on the surface or edge of the cutter, forming the cutting coating of the desired shape and configuration. Thanks to the correct selection of the angles of sharpening, the number of faces and other parameters of the plate, you can change the configuration of the cutting coating from the smooth plane to the embossed surface. As a result, after installing and tightening fasteners, you can get a universal tool for working blanks of any strength from various materials, from wood to metal.

Advantages of contacting us

If you are interested in carbide plates replaceable, you can buy them in our company. We guarantee the high quality of each product, compliance with the rating challenges declared in the description.

The plate carbide shift, the price of which is listed on the site, is offered without a mediator's markup, making a purchase favorable for the customer. When order, we offer delivery through the cities of Russia on comfortable conditions for the client. Call to learn more and make an order.

In the online store "Rinkom" you can buy replaceable plates for cutters and cutters of various types. We offer attractive cooperation conditions. We list our advantages.

A large assortment. In the catalog, you will find a huge number of replaceable non-varying plates designed to install on tools of various types and perform a wide range of operations.

Favorable prices. We buy tools and equipment directly from manufacturers. Prices are held at a minimum level.

Attractive conditions for long-term cooperation. Becoming our regular customer, you will get a serious discount on the entire range of tools for metalworking.

Clear compliance with the terms of prisoners. We bring the goods you purchased on a designated time. We guarantee the accuracy of the package of orders.

Wide geography of sales. We supply metal-cutting tools to Moscow, Moscow region and other regions of the Russian Federation.

Higher quality. Product specifications meet the requirements of guests. We guarantee the lack of marriage.

Prices for replacement plates for cutters and cutters

Prices for replaceable plates for cutters and cutters vary. The cost influence:

type of cutting elements;

their dimensions;

manufacturing materials;

manufacturer;

other factors.

Here you can acquire replaceable carbide plates of the following types.

3-faceted.

3-face broken.

Rhombic.

Square.

Plates-parallelogram.

5-graded.

6-faceted.

Products are made of solid alloys VK8, T5K10, T15K6, Wok71, Wok60, HB7520, etc. Available for ordering smooth models and chip-roll plates.

The use of replaceable carbide plates for cutters and cutters

We will describe the use of replaceable plates for cutters and cutters.

3-faceted. They equip boring, cutting and passing cutters.

3-faceted broken. They are fixed in automatic, boring and passing cutters.

Rhombic. Suitable for:

• boring, cutting and passing cutters;

boring heads;

tools for handling holes.

Most often, rhombic plates equip boring cutters. The main operations that are performed by these tools include: the rocketing of through, deaf and stepped holes, trimming the end of the blanks, the cone sharpening, the soles, the treatment of the holes with a diameter of more than 40 mm.

Square. They equip the end cutters, as well as passing and boring cutters.

Plates-parallelogram. Used for the same goals as rhombic.

5-graded. Designed to snap off the nasadnyh end mills.

6-faceted. They are most often fixed to the end road cutters and passing cutters.

Round. Scope of application - special cutters and end cutters.

The method of fastening replaceable turning plates depends on whether there are holes in them or not. To fix the cutting carbide elements with holes, the lever method is used. Plates without holes are fixed by other technology. Products are installed in the nests and grab pressed to the support surfaces.

Selection of replaceable plates for cutters and cutters

When choosing removable plates for cutters and cutters, consider the type of tool, the types of operations performed and the material of the cutting elements. Most often, the cutters and cutters are equipped with plates made of the following alloys.

VK8. The plates from this alloy are most often used in the rough processing of structural steels, hard-processed materials and gray cast iron.

VK6. Such plates are usually installed on cutters and cutters used to treat products from non-metallic materials, gray cast iron and non-ferrous metals.

T15K6. The sphere of application of plates from this alloy is the processing of billets from alloyed and carbon steels.

VK3M. Such plates most often set to tools intended for sharpening, cutting threads and deploying holes in products from alloyed and hardened steels, as well as abrasive non-metallic materials.

VK3. These plates are usually used when working with sheet metal.

How to make an order

To buy replaceable carbide plate for cutters and cutters in our online store, add suitable products to the basket in the right quantities and place the order. After clarifying all the details, we immediately organize the delivery.

How to buy a "Plate shift" tool?

To order and buy the selected product, find it in the instrument directory, specify its quantity and click on the "Buy" button, then you need to go to the menu item " Your basket "And fill out a small order form with the indication of your coordinates. After that, on your email (if it is true) the letter will come, about what your application is accepted.

Tool delivery

The tool ordered in our company is delivered to almost any city of Russia with the help of transport companies. By default, all accounts are exhibited without carrying out transportation costs.

Return of goods of proper quality

We draw your attention to the fact that according to Art. 26.1 The Law "On Consumer Protection" The Buyer has the right to refuse the goods at any time without explaining the reasons before its transfer, and after the transfer of goods - within 7 days.

The refund of the goods of good quality is possible, provided that the specified product was not used, its transportation, consumer properties, as well as a document confirming the fact and conditions of purchase, was preserved.

In case of refusal of goods, the company refunds funds paid by the Buyer under the Agreement, with the exception of expenses for the delivery of the returned goods from the buyer, within 10 days from the date the buyer has relevant requirements.

According to Art. 25 "On Consumer Protection" Buyer has the right to exchange goods of proper quality to a similar product from the seller, who has been acquired by this product if the specified goods did not fit in shape, dimensions, styasus, color, size or configuration. Exciting goods to a suitable buyer can within 14 days, not counting the day of purchase.

Exchange is made only if the commercial type and consumer properties are preserved, the availability of a commodity check or other document confirming payment, as well as if the specified product was not used. In the event that there is no similar product on sale, the buyer has the right to demand the refund of the funds paid by him for the specified goods.

In case of refusal of goods, the company reproves funds paid by the Buyer under the contract, with the exception of expenses for the delivery of the returned goods from the buyer, within 14 days from the date of presentation by the Buyer's relevant requirements. In addition, by agreement with the seller, the buyer can exchange the goods when analogue is received on sale.

In case of detection of flaws of goods, the buyer has the right:

• Require replacement for the goods of the same brand (model);
• Require replacement for the same product of another brand (model) with the appropriate recalculation of the purchase price;
• Require a commensurate decrease in the purchase price;
• Refuse to execute the contract of sale and demand the return of the amount paid for the goods.;

Return of goods of improper quality is carried out by means of the seller.

Rinkkom allows for erroneous or inaccurate information about the product located on our website www.site. We convincingly ask you to avoid unpleasant situations to contact our managers for clarifying information about the product. "

Carbide plates Designed for surface treatment, as well as to make items of various forms. Carbide plates are usually used in the cutters and cutters. Plates are divided into attacked and replaceable; They can also be performed in various configurations.

We have the opportunity to purchase products of various brand alloy; Plates can be metal-ceramic, elborov, as well as made according to other technology.

Carwide plates are replaceable parts for the cutting tool. Each alloy of carbide plates is used to process various materials - this allows you to qualitatively perform the necessary work by replacing one plate to another. Carbide plates are used in the manufacture of metal-cutting, drilling instruments.

Solid alloys are a solid wear-resistant metal, which retains its properties even at very high temperatures (up to 1150 ° C).

Replaceable multifaceted plates have the following advantages: multiple use of the holder, eliminating the breakage of the soldering, reducing the tool change time, forming the front face at the plate manufacturing stage, the possibility of hardening the plates. According to GOST 19042-80, multifaceted plates are divided into cutting, support and chips. The first is used to manufacture the working part of the tool, the second are supporting the cutting plates, provide them with accurate basing and long service life.

Chipballs are used for crushing chips.

The cutting edges of replaceable multifaceted plates have the greatest value. Plates differ in design, sizes, preparation of manufacture, execution. Depending on the design, the type of plate is distinguished, form, type of cutting edge

Our prices for knives, carbide plates nice will surprise you!

Carbide plates are classified according to GOST 19042-80. Cutting products are used in the manufacture of the working surface of the tool. Supporting carbide plates are used to fix blades. They provide accurate location of the cutting part. The purpose of chip-roll plates is the crushing of metalworking waste. All carbide products have constructive and overall features. The plates are additionally different in the quantity and shape of the faces, the presence of holes, the value of the rear angle:

• One-sided (R, M) and bilateral (N, A, F, G);
• With a flat face (n, a) and with chip-roll grooves (R, M, F, G);
• With a hole (A, M, G) and without a hole (N, R, F);
• With a zero rear angle (N) and at the rear angle greater than 0.

Bilateral carbide plates are more durable, but have less rigidity, durability and stability than one-sided. Products at the rear angle n are installed in the holder in such a way as to achieve the desired parameters. When choosing, it is worth paying attention to the configuration of the front face. The presence of chips is important for operation factor. The competent use of replaceable multi-faceted plates for the purpose contributes to an increase in the duration of the service of the metal cutting tool.

Production of carbide plates

For the manufacture of multifaceted nozzles, modern solid alloys with an improved formula are used. The geometric accuracy of execution is a mandatory characteristic that ensures a significant decrease in the percentage of defective products during metalworking. Specific parameters of carbide plates are regulated by standards. GOST 19086 determines the technical characteristics of chips, cutting and reference nozzles. In the production of prosecuts, the enterprise is guided by GOST 25395.

Benefits of replaceable carbide plates

Important moment. Replaceable multifaceted solid alloys plates are not intended for use with solid tools made in the form of monolithic products from the holder and working part.

In our catalog presents replaceable multi-faceted plates made of metal ceramics, elast and other solid alloys. All products retain initial properties when heated to 1150 ° C. For processing different surfaces, certain materials are used. A large range of carbide products allows you to perform all types of work by changing multi-faceted plates. This solves the problem of multiple application of the holder, reducing the cost of cutting tools and consumables when improving the quality of processing.

The appearance on the market of replaceable multifaceted plates for turning cutters and cutters led to the elimination of the flow. As a result, the work was able to reduce the state of sharpeners, reducing the cost of special equipment and abrasives with the savings of useful areas. The need for a soldering part has disappeared, so the costs of making the tool and solder have decreased. Fast replacement significantly improves productivity and saves working time. The advantages of applying carbide plates are obvious:

• Versatility of one cutter for performing different operations;
• Economic benefit from the replacement of plates, not tools;
• Rich selection of various destination carbide nozzles;
• Growth of speed and performance during metalworking;
• Increase convenience due to the possibility of changing modes.

The use of replaceable multifaceted plates is particularly beneficial in small enterprises and in everyday life, where the savings not only budget is important, but also areas. A set of carbide nozzles is much cheaper and occupies less space than the appropriate set of incisors or cutters, coping with similar functions. Multifaceted replaceable plates are successfully used for surface treatment, cutting sheet materials, forming threads, boring and deployment, sampling of grooves and stretching grooves.