What a laminate to choose for the kitchen. What a laminate is better to choose for the kitchen, focusing on consumer qualities. There is a laminate for the kitchen

Carrying out the floor repair in the kitchen, the question arises of which to choose the floor covering. Among the many materials, the laminate is a rather popular coating with a mass of benefits. But, is it possible to lay a laminate in the kitchen? If you listen to the opinion of specialists, we can conclude that the laminate for the kitchen is quite suitable. Important is the correct selection of this material. To understand what kind of laminate to choose for the kitchen, it is necessary to consider its pros, shortcomings, properties and types.

Advantages and disadvantages of the product for the kitchen

Laminate has many advantages that allow it to use it for floors in the kitchen. Among them you can allocate the main advantages:

Simple and quick installation;
Wear resistance;
Ease of care;
Resistance to temperature differences and exposure to sunlight;
A large selection of colors and design;
Beautiful appearance;

In addition, you can choose a coating that imitates various natural materials - wood, stone. It is very difficult to distinguish from the parquet. And some variants of the laminate can be installed on the system of warm floors.

It is also necessary to take into account the cons of this material:

Some species of laminated panels are swelling under the influence of water;
Laminate without a substrate can make a ringing sound when walking and moving items on the floor;
Embossed types of material can be harmful to health.

Having considered the shortcomings of the coating, we can conclude: to avoid the manifestation of minuses of laminate, it must be properly chosen and pay attention to the quality when buying.

The difference between moisture-resistant and waterproof laminate

In the kitchen, the floor can often be exposed to moisture. It can be like spilled liquids and drops from washing dishes. In addition, the care and washing of the floor in the kitchen is carried out very often. Therefore, it is best to choose a laminate in this case as minimally exposed to moisture. Such a laminated coating is two types:

Moisture resistant;
Waterproof.

Laminate classes suitable for kitchen

Laminate is suitable for styling in the kitchen, by class of strength: 31, 32, 33. Each of them has distinctive characteristics, so you need to choose the coating that most relevant operational requirements.

Has a service life not more than 12 years;
Suitable for laying in the premises of residential and commercial type having an average permeability.

Service life - 12-15 years;
Scratch resistant;
You can retain in rooms with the passability above average;
It has the cost higher than grade 31, but justifies it with their quality.

Recommended for use in premises with high patency;
Service life is about 20 years;
cracks and does not split during operation;
With prolonged contact with water, it does not lose its properties and does not swell.

Summing up, we can say that the laminate for the kitchen must match the following characteristics:

Be moisture-resistant;
Comply with the high class of strength;
Have a substrate not to make unpleasant sounds.

Laying of laminate

When laying a laminate, it is necessary to take into account some features and recommendations of specialists. For example:

Buy the panels are necessary with a reserve of about 10%. This is necessary to eliminate the lack of material, due to fitting. Especially if the room has a complex configuration;
Carefully read the instruction attached to the coating. Manufacturers always indicate the features of laying this type of laminate;
It is best to lower laminate in the kitchen in the direction of light falling out of the window. This will maximize the junctions between the panels;
The coating flooring on the diagonal of the room is the most difficult, so the simple version will be laying along the window opening or across the room;
Before working, it is necessary to carefully prepare the foundation of the floor, namely to make it as even as possible and supplement to high-quality waterproofing;
In a small kitchen, it is best to sharpen the panel of one color. The combination of laminate of different colors visually reduces the area of \u200b\u200bthe room.

Outcome

In conclusion, we can say that before choosing a laminate for the kitchen very important to learn all the recommendations and advice of specialists, as well as manufacturers. This will help make the right choice and purchase a coating that will serve for quite a long time, and at the same time will retain all its characteristics and a good appearance.

If a solution is made as a flooring to use laminate, then the question arises which coating will be the most durable and durable. After all, the kitchen is a place where the most domestic pollution is. What to choose a laminate for the kitchen to power all the loads and served faithfully and the truth for many years?

In order to make the right choice, consider - from which the laminated floor coatings produce and which components are used in the production process.

The structure of the laminate and materials used in its production

Laminated coating plates, as seen in the photo, have several layers, tightly pressed under pressure at high temperatures.

The main carrier layer - MDF plate or chipboard;
Decorative layerwhich provides a coating color consisting of a dense paper material;
Protective top layerconsisting of impregnation with melamine (insoluble durable chemical compound) or other safe connections (at the discretion of the manufacturer);
Lower firming layer - Tight kraft paper.

A chipboard (HDF) of varying degrees of hardness and durability is used as the laminate base. These indicators depend on the amount of wood as part of the slab. The more denser the material, the less emptiness in it, and the moisture resistance of the laminate increases. The choice of laminate for the kitchen involves the strength of the coating and its resistance to impact, i.e. . After all, quite often it is in the kitchen something heavy falls on the floor, unfortunately.

Some manufacturers for increasing the strength of the laminate are added to the protective layer various reinforcing fillers:

fine silicon dioxide;
finely dispersed cellulose fibers;
thin-chopped alpha aluminum alpha oxide - corundum.

The number of fillers and plasticizers in the material - the know-how manufacturer.

The variety of colors and the textures of the laminate is provided by the pattern, tightly attached to the chipboard. Difficulties in the question of which laminate to choose to the kitchen on design and pattern does not occur. It all depends on the overall style and design of the kitchen.

The most important thing in the question is how to choose a laminate for the kitchen, a protective coating of the laminate. Until recently, manufacturers offered only moisture-resistant variants of such coatings. But now in the building materials market, you can see the laminate samples, positioned as waterproof ,.

Council. By purchasing laminated kitchen floor covering, it is better to stay on the materials of the moisture resistant to the exposure to moisture - waterproof. Although the price for such a laminate is higher, but the buyer is guaranteed in the stability of the material to high humidity.

What is the difference between moisture-proof and waterproof laminate

Knowing how to choose a laminate for the kitchen correctly, the buyer will not be disappointed in its solution. It is in the kitchen very high risk of flooring. Therefore, for kitchen premises, it is recommended to use moisture-proof or, even better. What is the principal difference between these two coatings?

A feature of this floor cover is that the ends of the lamellae are processed by additional water-repellent compositions. As well as an external, protective layer of material, additionally has a coating that protects against moisture. Instructions for the installation of moisture-resistant laminate involves the use of water-repellent adhesive compositions for lamellae joints.

Since the weakest place of any laminate is the joints between the panels, their additional repulsive water processing guarantees a long service life of the coating.

On the Internet, you can find a lot of video materials according to both the method of lock clutch and the substrate using adhesive compositions.

Council. For the kitchen it is better to stop on the installation of the laminate of the joint in the joint, without a lock clutch. This will further process the seams with water-repellent glue. The only negative of this method of installation is if you damage one lamels during operation, it cannot be replaced. We will have to dismantle the coating.

If it is decided to mount the floor from the laminate in the kitchen with your own hands, then carefully additionally seal the joints of the slats with a special sealant.

Waterproof laminate

Production technology is constantly being improved and in stores you can find the laminate is absolutely resistant to water. Manufacturers ensure that this material may be in water for more than twenty-four hours and will retain all its specifications.

What a laminate to choose for the kitchen is moisture-proof or waterproof. After all, the price of these materials is distinguished by almost twice.

Waterproof laminate for the kitchen is still preferable. Especially if the owners often take a long time for a long time, and neighbors forget to turn off the water in the bathroom on top.
Features of finishing and texture

There are several options for laminate finishing to give it natural wood texture:

Embossing;
Stamping in the register;
Braching;
Chromium zone.

Each of these textures has its own distinctive features of production and operating conditions.

Embossing

In this case, the method on the lamellas is applied a thicker protective layer, which is pushed or cut along the length of the plank. The photo shows that a complete illusion of the use of natural wood is created.

Such a coating is possible to wash much less often, and contamination is not too visible on it. In addition, the material acquires extra strength.

Embossing in the register

The grooves cut on the protective layer coincide with the painter of wood finish. It looks very impressive and stylish. The choice of laminate for the kitchen can be stopped in this embodiment. Especially if such a laminate has moisture resistance.

Braching

Treatment combines embossing and staining of grooves with re-coating with a protective layer. This gives material strength and resistance to abrasion.

Chrome zone

Chromium alloy, which decorate the grooves on the lamellas, not only strengthens the material, but also makes it extremely spectacular.

So, what to choose a laminate for the kitchen:

Resistant to moisture;
With a solid basis - not lower than the abrasion of 33;

Council. Whatever the sellers of laminate in Russia, the specifications of the abrasion class 3 is not.

With antistatic surface treatment;
Environmentally safe.

Whatever the choice of laminate for the kitchen was not made, the main thing is that the material is high-quality. And depends only on tastes and the preferences of the home.

Kitchen - soul at home. This is the place where the whole family is tasty and is often going to the whole family. But it is here that various products are most often falling to the floor, the dishes are broken, water, oil, juices and other liquids are spilled. Therefore, there are much more stringent requirements for the flooring than to the material for other premises.

The kitchen flooring can be wooden, ceramic, vinyl and even laminated. Any selected material must comply with the following criteria:

Wear resistance

The floor must withstand constant hiking and abrasive loads, as well as the weight of furniture, home appliances and interior items. We will not be resistant to point shocks, such as incident porcelain or glassware, knives and other acute products. Usually this parameter corresponds to the floor finishing materials from grade 23 and above. 31-32 are recommended for kitchens in residential apartments and homes, for commercial facilities (restaurants, cafes, hotels) it is desirable to choose products from 34 categories of wear resistance and more.

Moisture resistance

The kitchen floor very often needs a wet cleaning. In addition, water splashes are constantly falling on it, various liquids are shed, including staining or forming spots. Accordingly, the surface of the finishing material (especially in the area of \u200b\u200bthe joints between the slats or elements of the coating) should be moisture resistant, and even better - waterproof.

Easy to operate

Housewives appreciate such qualities as resistance to the formation of spots, fading, ease of removal of dust and various contaminants. In addition, such coatings, which do not need to restore the protective layer (varnish, wax), the need for additional care, etc. are especially attracted.

Wide selection of decors

It is no secret that the design of the floor plays the last role in the kitchen interior. Therefore, preference is given to those outdoor materials that fit perfectly in any style, perfectly combined with other finishing products. And if necessary, create a background for bright furniture or serve as a kind of dominant in the design of the room.

High-quality laminated parquet of famous brands fully meets the above requirements. Let's deal with the basic characteristics of the laminate.

Types and features of laminate

The laminated coating refers to the category of thin, but at the same time sufficiently hard. The main distinguishing feature is a delicious or locking system of the spike-groove compound. The special form of the lock allows you to mount the planks into a single, smooth, monolithic coating of the "floating" type (that is, independent of the base).

Several types of laminate are produced:

Classic HDF-coating

This is the first and most common modification of outdoor products, which was positioned as a budget analogue of the parquet and a massive board. It is a multilayer finishing material for a floor consisting of:

Overlea - a protective transparent film from durable thermosetting polymers. Due to it, the surface is resistant to abrasion, water and even frequent point loads.
Decorative paper with a pattern corresponding to collections - under wood, stone, ceramics, textiles, skin and much more. The image is applied by the method of high-precision laser printing, so it turns out almost the perfect imitation of natural material.
Carrier HDF bases with a thickness of 6-14 mm. It is a fine wood flour mixed with thermosactive polymeric resins and a density compressed in a plate of 700 to 1100 kg / m³. In the perimeter, the locking compound is cut, by means of which the planks are harvested without glue and fasteners into a single, monolithic cloth.
A stabilizing layer, which is impregnated with thermoactive paper resins. Purpose - protection of laminate from residual moisture content and preventing lamella deformation.

Some manufacturers (TARKETT, CLASSEN, etc.) to increase the stability of the coating to water additionally handle the castles wax. When snapping, the paraffin seals the joints and prevents the boards of the plates with direct contact with moisture. This floor is a wonderful solution for kitchens, balconies, hallways.

Wax protection on the ends of the laminate.

Available in all classes of wear resistance (see table below).

With proper installation, high-quality coverage from well-known manufacturers is different:

High levels of resistance to abrasion, temperature and humidity drops;
A dense connection of locks, which can not even overcome water drops;
Maintainability: minor scratches, minor scratches, chips and other defects with repair waxes or valve markers;
Practicality and ease of care;
Durability. The average service life of the laminated floor is 10-20 years, depending on the thickness and class of the load.

For laminated medium and lower price level floors, so-called masses or sealants are produced for sealing seals. The product is applied to the lock before installing the lamella, and after snaping, it forms waterproof stake protection.

Of the disadvantages of HDF-laminate, we will note the swelling with long-term contact with water, the accumulation of static electricity over time, the need for noise insulation device and high demands for the base.

PVC coating

For nearly 40 years of sales, the laminated parquet has become so popular that the manufacturers decided to modify it a little and released a truly waterproof analogue of ceramic tiles and stone - vinyl laminate. It is a strong lamella of composite plastic with a thickness of up to 10 mm. They produce hollow (with multiple vertical rigid ribs) and full-scale plates, the surface of which mimics wood or stone texture. The perimeter is formed a puzzle castle of a complex shape, which allows you to collect the product in a solid, smooth floor.

Vinyl laminated coating is made in 23, 31-32 wear resistance classes, that is, suitable exclusively for the residential and office sector. It is characterized by absolute inertia to water, household chemicals (with the exception of abrasive). It is not recommended for laying in places of elevated passability, as the studs and claws of animals can leave unreasonable scratches on the surface.

Modular coating

The practicality of the delicious system of the compound was rated manufacturers of cork and linoleum coatings. Therefore, now on sale you can meet:

For kitchen and dining rooms, choose a laminate with a cork or wood veneer under varnish. Such a protective coating forms a solid, wear and waterproof film, easy to maintain and restoration.

Let's summarize: in the kitchen on the floor you can lay a laminated coating of any kind. The main thing is that the products are good, high-quality and corresponded to 31-32 class class. Preferences Give materials on the HDF-stove with moisture-resistant impregnation of locks.

Laminate for the kitchen in which you want to cook

Modern trends are such that the decor, the color and texture of the floor in the kitchen and table premises can be absolutely any. It is not a drawing or shade, but the functionality and combinatoriality with the rest of the interior.

Studying a collection of well-known manufacturers one can see that the overwhelming part of the produced laminate has the characteristic design of a single-band board of radial, tangential and mixed cutting.

Less frequently and three-way decor is used.

Original mix of two and three-band board. Under deck parquet. For a three-way beech. Under the oak parquet two-band. Merbau Board in two-band design. Under the parquet in solar kitchen. Fact three-haired floor in the kitchen is modern.

At the same time, the drawing may be uniform-calm or vice versa, with brightly pronounced annual rings, bitch, scuffs, contrasting transitions from a light shade to the dark.

Brightly expressed contrast of shades. With imitation of bitch. Halftone game. Rustyl. Under the cherry. With the imitation of the fallen sites. Exotic wood breeds. Under the aged floor With imitation of multiple cracks

Special visual effects are created by applying various surface embossed techniques, cutting V- or U-shaped chamfer from 2 or 4 sides.

Embossing to register. Embossing. Four-sided chamfer. Embossing Rustic in combination with V-Fame Relief embossing under the vintage floor. Bilateral chamfer. Under the authentic board. Charming chamfer in diagonal laying.

The mirror, the smooth floor in the kitchen is considered dangerous due to the low level of sliding resistance. But not in the case of laminate. The glossy and semi-chair surface of this coating looks spectacularly, while safely in operation.

Another thing is complementaryness with glossy facades of kitchen furniture. Here the variants of the combination are a huge set.

Whatever paradoxically, the classic wood shades look harmoniously with pastel and bright furniture. With a competent approach, the laminated floor will perfectly complement the kitchen atmosphere, giving the room the necessary charm and integrity.

One of the most successful design effects is the change in lamella decor with intervals 1: 4, 1: 6, 1: 8. If you disseminate the planks of a similar collection, you can see that the drawing is repeated every 4-8 plates.

The most active attendant room of the apartment is a kitchen. Life with all manifestations - moisture, steam, temperature difference, contamination are boiling. The floor covering reacts to each, therefore, should remain inert to the negative. Laminate, if it is properly chosen, is capable of durability even in extreme conditions. What laminate is suitable for the kitchen - in detail in this article

Kitchen features

Traditionally, the floors in the kitchen are resurrected by ceramic tiles or linoleum.
This is justified, as the coatings are distinguished by the simplest leaving for them. But what is better to the kitchen laminate or linoleum with tiles? Judge for yourself:

No tile, nor linoleum is distinguished by resistance. The first will split if you drop anything heavy on the floor, the second one will swell if the moisture falls under the coating. The service life of two floor coatings is small.
Laying tiles is conjugate with mud and stretching repair for an indefinite time. For linoleum, it is required to free almost all the space from furniture, similarly to align the surface of the floor.

So, what is better tile or laminate in the kitchen? As a conclusion - the laminate for the kitchen will be the right decision if it is decided to lay a durable coating, inert to the realities of the kitchen.

Laminate in the kitchen - pros and cons

A multilayer board, which is laminate, has sufficient strength to withstand moisture, strikes, climatic differences. Resistance to abrasion depends on class - for the kitchen it is not lower than 31.
Hygienic is due to a smooth surface on which pollution is not delayed. In the kitchens often mount the warm floor - the laminate with it in the tandem is well rolled. There are cons:

Low classes of budget coating are unstable to moisture. For kitchens, a special option is selected, withstanding not only condensate in the seams, but also a stagnation of water for several hours. Cost respectable.
No environmental friendliness. Kitchen - Room hot. If the laminate is purchased from unknown sellers, it guarantees in its composition an increase in the percentage of formaldehydes capable of stand out into the atmosphere. All certificates must be provided to the coating.

Despite the shortcomings - the laminate is in demand, since in addition to the strength qualities, it has a worthy appearance and will create any style in the kitchen.

Laminate in the kitchen interior

Photo of the kitchen interior with laminate helps the owners to decide on the choice:

Wear resistance class Laminate

Considering the cuisine and the corridor's passing activity, the class of laminate is required not lower than 31. Consider features:

All these qualities talk about the advantage of high-class laminate for use in the kitchen. The corridor has no less aggressive conditions - therefore, it is clear what kind of laminate to choose for the kitchen and hallway.

Waterproof or moisture-resistant?

In humidity, the kitchen is comparable to the bathroom. Recently, laminate marking began to contain the word AQUA - the stability of the contact with water. The nature of the laminate began to be classified as waterproof and moisture-resistant. Is there any difference? Let's consider:

Features of moisture resistant laminate

Boards with the body of MDF - fibreboard possess elevated glue content. He is between the layers. Such protection is quite good, so as not to let the condensate or steam. However, in more stringent conditions - for example, a flood from neighbors - the obstacle will not withstand the amount of moisture. Sew such laminate is useless. The remaining water deform the board and spoil its appearance.
In the kitchen such a laminate is suitable in the dining area or dining room - where there is no large amount of moisture guaranteed.

Features of waterproof laminate

The difference of this species in the absence, in general, a hint of wood. The body is a polymer slab, inert to moisture in principle.
Such a laminate will not swell, not deformed. It is successfully put in the saunas. The cast structure can withstand elevated loads, the appearance is not inferior to the traditional laminate. The price is high. The kitchen often does not require such radical requirements for the flooring, so it is enough to buy a board with a high class of wear-resistance.

Select the lock system

For resistance to moisture - an indispensable phenomenon in the kitchen - it matters the lamellasties of laminate.
This is a traditional spike-groove and adhesive method of connecting boards. The advantage of the first:

Fast laying. If the base is smooth, then the work ends in a few hours without removal of furniture.
Possible replacement of a spoiled board.

Disadvantage - leakage. In the event of a leakage, the moisture will penetrate under the floating floor than will provide damage to the laminate coating.

Plus the second - in tightness. Wholes are missing all the board connections. This, however, does not smooth out the shortcomings:

Replace without dismantling all the coating can not be done.
Adding to the total mass of formaldehyde.
It takes the perfect alignment, otherwise at a pressure, the joints will disperse or crack the lamella in the fields of emptiness.

As a result - laminate in the kitchen, the photo of which is lower, better with spike-groove connections or click.

Cleaning kitchen laminate

Floor care depends on its fear of moisture.

If the linoleum or tile is inert to it, then the laminate, given the above-described above - no. Therefore, specific cleaning is required:

Without a large amount of moisture.
Cleaning vacuum cleaners are excluded.
Spots are derived by special means.
Cleaning is held daily.

Perform these requirements is easy. In homes with young children - it will be frequent.

Conclusion

So, how to choose a laminate for the kitchen and the corridor - described in detail. We summarize - a moisture-resistant coating is required, not less than 31 class of wear-resistance. Pick up the color and imitation under a certain style - labor will not be.

If you have found a mistake, please select the text fragment and click Ctrl + Enter..

One of the most popular covers is currently considered laminated. But many wonder: is it possible to lay a laminate in the kitchen? What kind of laminate is better to choose for the kitchen so that he meets all the requirements for the surface of the kitchen floor and arranged us on the design?

The kitchen is one of the most visited places in the house. Each hostess wants the kitchen to be comfortable and beautifully looked. It is important that the choice of flooring in the kitchen room, taking into account all the features of this zone: a large attendance, fluctuations in temperature and humidity values \u200b\u200bin a wide range, the possibility of water from the floor to the floor, the drop in the kitchenware is also most likely to be here.

For these reasons, the requirements for the surface of the floor have a lot:

the most important requirement is moisture resistance;
durability and wear resistance;
easy care;
design, color solution matter.

Sure. It is necessary to correctly select the type and class of the product, pre-thoroughly prepared the basis.
For the kitchen should not use conventional laminated plates. It is worth choosing tolerant to moisture material - moisture-resistant or waterproof laminate.

The moisture-proof panel has a base - a dense and moisture-resistant HDF plate (HDF).

Laminate selection for kitchen

Strength class and wear resistance.Laminate strength classes are values: 31-34. For the floor of the kitchen and the hallway, 32, 33 classes, 33rd better are recommended. With proper operation, it is able to serve at least 20 years. Class 3 class 3 has greater durability, but it is too expensive and is intended for use in the premises of very large patency: offices, salons, etc. It is not worth paying extra money for using it in domestic rooms.
Moisture resistance.Kitchen floor covering should be resistant to moisture. The product should be present marked with an image or a crane with a water droplet, or an umbrella.
Locks.Laminated boards are equipped with locks: Click (angular connection) or LOCK (direct connection, unbearable). More practical is Click: If necessary, it is possible to make local repairs, i.e. Selective replacement of lamellas. Products with Lock locks are unspeborified, harder in laying.
Manufacturer and quality.Do not buy inexpensive laminate of poor quality of dubious manufacturers. It is better to wait, soak and choose a high-quality floor covering.
The thickness of the lamella.What she is more, the board is stronger, but also more expensive. In the kitchen or the hallway coating with a thickness of 9-12 mm.
The level of formaldehyde isolation.To ensure health safety, choose material, marked: E0 or E1.
Non-slip surface.To avoid injury on the smooth floor, pick out not glossy smooth into the kitchen, but grungy, non-slip material.

Laminate in the kitchen: pros and cons

ease and speed of laying;
affordable price;
qualitative material is not afraid of moisture, temperature fluctuations. It is easy to care for him, you can often wash, it does not lose colors and glosk;
the laminated floor is warmer than the ceramic tiles laid down - it is comfortable to walk with barefoot. No additional heating is required;
not formed to be added from furniture;
aesthetic surface of the coating, a variety of design and a large color gamut.

Disadvantages:

moisture-proof laminate does not withstand long exposure to fluid. In the event of a breakthrough of the water supply, especially with hot water, the material can be spoiled.

Decision. The use of waterproof laminate will avoid a similar situation, since it is completely not afraid of water.

Tip: When the liquid is spilled on the laminated coating, you should not check the moisture resistance of the material, and wipe it for a short time.

Stupid heels. There is a sound of steps, especially in the presence of heels.

Decision. If a substrate from cork material is applied either from polystyrene foam, which has sound absorption, there will be no such problem. The substrate reduces the volume of the sound of steps and smoothes small base errors.

Scratches and chips. Durable laminate racks to damage, but at certain situations it is possible to form scratches and chips.

Decision. To eliminate small defects, use wax chalk, selected in the color of the coating, building the place of damage.

Moisture-resistant and waterproof laminate for the kitchen

These are two different coatings. They have a completely different composition and their attitude towards them are different.

Moisture-proof material It has a dense moisture-resistant HDF-slab. The protective surface layer, which has the property of moisture resistance, is capable of not passing water, the locks are treated with wax-resin moisture resistant mixtures.

Such material can be laid in the kitchen, it stands for decent loads, withstands the increased humidity, it has good sound insulation, it can often be washed. Note that the presence of fluid on the surface cannot be long or permanent. Many experts recommend for the floor of the kitchen moisture-resistant laminate 33 class.

Waterproof laminate It has a completely different composition:

the basis of it is PVC stove, i.e. plastic, which is indifferent to water;
the lower layer of the plate is moisture-resistant;
no chamfer, i.e. stakes closer, do not let the water;
additional waxing locks.

This type of coating is still name: plastic laminate.

Waterproof Laminate for Kitchen Pros and Cons

It can be used for the floor in the bath, sauna. The long presence of water will not spoil it. Plastic laminate is also suitable for the kitchen.

Panels have many design options. The popular solution is to design panels in the style of wood, under the natural stone, under ceramic tiles, it is good to apply for the design of the floor in the kitchen.

Disadvantages of waterproof laminate

high price;
the low environmental friendliness of plastics is alarming. Household polyvinyl chloride in calm state is not dangerous. But it becomes dangerous when a fire occurs, because When burning, dioxins are distinguished, harmful to human health. Currently, PVC is widely used in everyday life, for the production of dishes, packaging material.

Laminate design options in the kitchen

May be chamfer. Laminated panels can have a chamfer - SCOS along the edges of the board. When installing panels, grooves are formed - they enhance the similarity of the material with a wooden floor.

Wooden Board Design

Laminated coating simulates numerous wood species: oak, pine, chestnut, wenge, etc. Most variations on oak boards - natural, bleached, smoky, aged, ...

Laminated panels in the style of wood, have a matte non-slip surface that looks strictly tasteful. If you are impressed by the laconicity in the interior, this option is perfectly fitted into your kitchen.

If your taste is retro, it is worth choosing a design under the aged tree. Such panels have elements of "scuffs", inhomogeneous color with the effect of sweaty paints.

Under the tile or stone

Coating, with simulation of tiles, natural stone - a good choice for the design of the kitchen interior.

Is it possible to lay vinyl tile in the kitchen

Newly on sale appeared new product - floor vinyl tile, called: vinyl laminate. It is difficult to agree with this title, because This is still a tile, not laminate. Its similarity with a laminated board:

this is also a multi-layered floor covering;
the option of tiles with lock connections is equipped with the same as on lamella, locks (but there is a type of tile without locks).

At this similarity ended.

Many wonder: whether the vinyl "laminate" is suitable for the kitchen, so we decided to talk a little about it, gaining increasing popularity, coverage.

Vinyl tile is made of polyvinyl chloride (PVC). A square or rectangular shape of a variety of sizes is produced, in large ruls; There is a tile having a laminate panel size. It is characterized by a small thickness - from 3 to 6 mm, which allows the use of material without reducing the height of the room.

Varieties and features

Vinyl tile differs from the type of installation:

Differees tile by strength classes :

classes 23-31: the thinnest tile, the strength is not high. Purpose tile - for small attendance: bedroom, living room;
classes 33-42: Commercial option. High strength. Purpose tile - for floor in rooms with high patency: offices, cafes, apartments - kitchen, entrance hall, bathroom;
class 44: the largest thickness, the highest strength, anti-slip. The tile is intended for use in gym. Expensive.

It should be noted a large number of different decor options and color solutions. There are imitation of natural materials: under natural stone and wood.

Advantages and disadvantages of vinyl coating for the kitchen

Advantages:

disadvantages

pretty high value of the material. The price of tiles of good strength is about 30 € per m 2, i.e. more than good laminate;
the coating requires a prepared base well aligned. As a base, cement screed, waterproof plywood, OSB. It is impossible to lay the vinyl tile on the fiberboard, on the cork floor, on the old boarding floor, on the household linoleum, on the laminate. The surface should be dry before starting installation;
in the event of a fire, the vinyl eats toxic substances into the air.

Conclusion

We will summarize our arguments: in the kitchen laminate it is not only possible, but also needed. Most likely, you already know which laminate is better to choose for the kitchen.

Choose moisture resistant, waterproof or vinyl coating. It is important to take into account the class of its strength. It is worth paying attention to the manufacturer and the cost of the material. From a huge bouquet of decoration and color, you should choose to choose your kitchen interior and received your sympathy. And then you will have the best laminate for the kitchen.