Decorative false fireplace do it yourself. Decorative fireplace with your own hands Fish fireplace from bricks with their own hands

The beauty of the fire flame enters and entails. You can watch it without breaking around, for hours. And rarely meet such a person who would not dream about installing a fireplace at home. But what to do if you live in the apartment and install the fireplace in it? A decorative fireplace from drywall will come to the rescue.

photos

Benefits

Decorative fireplaces day from day are becoming increasingly popular. If earlier they emphasized their wealth, now this is a common decor element. This is because such fireplaces carry harmony to the house and have a number of positive aspects.

The decorative fireplace will add chic to any interior, speaking a major emphasis in it.
The false fireplace is not only a decorative element, but also a heating appliance that will bring warm and adds comfort to your home.
Near him nice to spend time with loved ones.
Not dangerous for children.
The decorative fireplace from drywall, made by their own hands, does not require large investments.

And these are only the main advantages of installing a false fireplace at home.

photos

Place for the fireplace

If you decide to install a flush fireplace at home, then it is necessary to determine the place. The choice of location is very important, so that it is possible to qualitatively create the illusion that the fireplace is quite real.

First, we determine the room where we plan to install such a fireplace. Everything is simple here. Most likely it will be a living room or room. Less often decorative fireplaces are installed in the bedroom.
Secondly, we plan to place it. It is usually installed in the middle of the longitudinal wall. But here it all depends on your wishes and the project project, as well as on its technical capabilities.

Do not place a fireplace in places where it will interfere. For example, near cabinets, doors and batteries. This will not only complicate the installation work, but later the fireplace may be damaged.

How to do

To make the decorative fireplace itself, you will need small skills to work with drywall, the skill and desire to create, and more, of course, the tool.

Initially, it is necessary to make drawings. First draw the scheme of the location of the future fireplace, or even a few, and then draw the fireplace in two projections, apply all the necessary dimensions. It is better to perform a drawing of a genuine value to easily try on the wall. We develop a sketch to the smallest detail so that I didn't have to redo anything.

Based on the drawing, we make a layout of the future fireplace from cardboard boxes or foam. It is necessary to create all the parts of the fireplace, and install them on the tape where you plan to place this decor element. Perform the layout gently, completely in accordance with the project to analyze the errors in advance and eliminate them.

Go to the construction of the design. During construction, we will need:

bulgarian;
perforator;
screwdriver;
bouncer;
putty knife;
stationery knife;
scissors for metal;
roulette;
building level;
pencil.

Initially, we transfer all the details of the future fireplace on the plasterboard sheets, and cut out with the help of a grinder. We place on the wall all parts of the fireplace, we use the construction level to comply with the clear line of horizontal and vertical. We establish the guides on the wall, where it is planned to place a false fireplace. This is done with the help of a perforator and dowels.

If you do not plan to install a false chimney and think to organize a shelf for photos and figurines at the top, then it is necessary to immediately enhance the side racks for the reliability of the design. Get the power cable with electricity into the design so that you can then insert and connect electrofire or LCD TV in the portal. You can collect the frame separately, and only then install on the wall. This option is more convenient if your fireplace is near the wall.

Now we are wearing a frame of plasterboard. We do everything carefully, remembering that the retreat of several millimeters can distort the entire picture and will not let the opportunity to fill the portal in the future. If the facing of the false fireplace is assumed to be massive and heavy, then it is necessary to persuade the future fireplace with two layers of plasterboard. To cover the fireplace, plasterboard sheets are suitable with a thickness of at least 1.2 cm.

Next, go to the putty. For what it is necessary to process the edges of the drywall abrasive, to predelve and scream the fireplace completely. Puttyra produce and inside outside. We use a tape and perfogee for connecting sheets to each other so that the tapping is well and the surface has become perfectly smooth.

The next stage is the finish of the false fireplace. You can arrange it with any material. There are tiles, artificial stone, plaster trim, granite, marble, just painting and much more. It all depends on your imagination and the stylistic solution of the room as a whole.

But initially it is necessary to separate the inner part of the decorative fireplace, especially if heat transfer will be installed in it. Thermal insulation is in this case necessary. Separate the portal magnesite and coated from above the foil. Such a layer will reflect heat and will not allow to heat the inner walls of the fireplace.

If the heating device in the false fireplace is not envisaged, then it can be separated inside the mirror.

If the fireplace is finished with artificial stone or marble, then finishing works in the form of putty can be omitted. In this case, it is necessary to simply brand the plasterboard, and then glue the stone with special glue. We give glue to dry well and treat all the seams between the Special Grouting Stone.

Another remarkable method of finishing a firewall is decorative plaster. We apply it to the fireplace, and without waiting for the drying of the coating, with the help of a spatula imitate brickwork.

You can go with a decorative film, picking up a suitable pattern. A huge selection of textures will make your fireplace unique.

After the fireplace finishes, it is necessary to decorate it. To do this, use various columns, stucco, moldings. Such a decor will give the artificial fireplace of naturalness and completeness.

On the upper part of the fireplace, you can install a decorative shelf, install an electrocamine or TV in the furnace.

Design in the interior

The design of the decorative fireplace can be performed in any stylistic solution, and it is possible to equip it in different ways. From the fact that you fill the portal at a false fireplace will determine the function of this decor element.

The fireplace decorated in a classic style, decorated with marble or granite, with an electric fireplace in the portal, will bring not only heat into your room, but its presentable look will become a central accent in the interior.
False chimney will add a fireplace of naturalness.
Brick-decorated fireplace with a TV in the furnace is suitable for the stylistic solution of high-tech. Its clear lines and simple forms will perfectly fit into this style.
The decoration in the form of Greek statues will give chic and fit into the bohemian style of the living room.
For an apartment decorated in Modern style, a fireplace with minimal finish is perfect.
Candles in the portal will add romantic notes to the decor of the room.
Decorative fireplace is an opportunity to use as a shelf for books.
The angular false fireplace will be decorated even in a small room.
The upper shelf can be arranged by clock statuette, giving English chic interior.
The decorative fireplace, decorated with a stone, is perfect for a room with a rustic style.

The owners of urban apartments about the present fireplace with cozy crackling firewood have only to dream - overlapping typical houses may not withstand such a load, and chimneys in high-rise buildings are almost always absent.

But this is not a reason to abandon the design in the style of the classic living room! Decorative fake fireplaces create an atmosphere of comfort and heat, especially if equipped with electrical firebox with imitation of the flame.

To build a false fireplace with your own hands is quite simple, it is enough to find or draw a sketch, choose the framework of the frame and decoration. For the manufacture of a false fireplace, a variety of building materials will be suitable: plasterboard on a wooden or metal frame, polyurethane decor elements, tile and porcelain stoneware, MDF and LDSP, plywood, foam and even ordinary cardboard. The shape of the decorative fireplace can be completely different, from the simulation of a classic focus to the original design, supplemented by other elements of the decor.

In this article, we will try to describe the process of creating a false fireplace in the most detail in detail, provide all drawings, photos from different angles and video with a finished product, good luck in construction!

The fastest way to do is buy ready made from polyurethane. The range of portals is wide and you will probably choose the style and size suitable for your room. Electrocamine can be built into the finished portal from polyurethane, for this it is necessary to know its overall and installation dimensions, as well as the requirements for ensuring ventilation and connecting to the power grid. If you want to do the most out of your own hands, you can go shopping and remove the size from finished portals, buying a piece of polyurethane you can make a similar model much cheaper of its finished analog!

To create such a fireplace, you need to purchase polyurethane, contact glue, putty and finishing materials for the furnace, for example, decorative brick.

Step-by-step process of installing a false fireplace

Finished portals can be not only from polyurethane, but also from wood. Their price is significantly higher, but among them there are real masterpieces, for example, with a bar inside.

Falsh fireplace from drywall, simple and fast

To make it easing the budget for the film - to use the remaining plasterboard and profile. Such a decorative fireplace will easily fit into any niche or angle, and can also be an element of a whole composition of the shelves.

Falke Fireplace from plasterboard - Photo

To create a false firewall from drywall, you will need: galvanized profile for drywall or wooden bars, sheets or trimming of drywall or plywood, screwdriver and electrolovka, metal scissors, putty and acrylic paint, decorative stone or brick.

Falw fireplace manufacturing technology from drywall

The main key of success is a thoughtful sketch of the future with the indication of all the sizes and locations of the frame of the frame. Measure the room and decide on the installation site of the fireplace. Calculate the required amount of material, and feel free to achieve a business.
From the galvanized profile, the framework is performed, connecting it elements with the help of metal screws and a screwdriver. Cut the profile with a hacksaw or scissors for metal. For stability, the frame elements are connected by transverse jumpers. To the walls and semi frame, it is necessary to secure in the event that the design is obtained by cumbersome, severe or too narrow -, i.e. If there is a risk of instability of the structure.
Sheets of plasterboard cut out the sketch, try. Move and fasten with kalen black self-draws to the profile. Self-tapping caps are slightly plugged to sharpen later. Plasterboard is easily cut by a knife.
The joints and fastening sites are putty and leveled with a putty for internal work in two layers, the corners are additionally strengthened with a painting mesh.
Align the surface of the sheets if necessary using putty.
Color the resulting design or finish with other materials: artificial stone, tile or stucco. They glue them to the material intended for this material, divorced according to the instructions on the package.
It is possible to install a mirror using materials using materials that imitate brickwork, you can install a mirror on the rear wall of the furnace.
Inside the furnaces put candles or imitation of the hearth with illumination.
Such a false fireplace is absolutely safe, it can be installed even in the nursery. The fireplace regiment will serve as a stand for photographs, toys and baubles, and gently shimmering hearth will create a cozy atmosphere.

Corner Decorative Gypsum Carton Fireplace (Video)

The most fiscal option that allows a false fireplace with backlight from an old unnecessary servant or a cabinet. To work, you will need:

electrolovik;
grinding machine on wood;
screwdriver;
plywood sheets;
putty;
acrylic paint;
finishing materials: stucco and finishing stone from plaster, decorative elements.

The technology of fulfilling a false fireplace from the old servant:

The opener of the old sample remove the doors and remove the lower end, leaving only the upper section. She put on the side.
Sewing the facade plywood so that the furnace and the woods are turned out. Phaneur is attached to the self-tapping screw with the help of a screwdriver.
Polished surfaces are treated with a grinder on a tree to make them rough. Grind the walls of the primer on adhesive basis, and after drying the primer, they put sand and align the surface. Surride a putty, sanding irregularities and paint it acrylic paint, the angles are separated by an artificial stone or brick. Decorative elements are glued - stucco, install a fireplace shelf from MDF.
The furnace is drawn up: the perimeter is glued with a red or yellow LED tape, and the bottom is designed with pebbles, colored sand or seashells. You can also install candles inside the furnace.

Reading time ≈ 3 minutes

Evening, twilight and dancing flames in the fireplace, which is not bored with looking. The room is unusually cozy, a cup of hot cocoa in the hands, what could be better? Many people think that the fireplace is a luxury, available only to secured private household owners. It is not so, it can be installed in a regular apartment, even one-room, however, it will be decorative without chimney, pipes and valves, but the main parts are furnace, the portal, the shelf will be present. Make a decorative fireplace with your own hands on even a woman. Many ladies are managed with building instruments no worse than men.

What can make a decorative fireplace from?

A brick is suitable, and not necessarily refractory, eco-style lovers will prefer a tree. If the edged board remains after repair, it can also be used in business. It is interesting to look at the board with pieces of the bark, it will create a feeling of unity with nature. Transparent vase, an old aquarium that already wanted to throw away - everything can turn into a cozy focus. Sometimes the fireplace is required for holding a children's holiday, creating a Christmas atmosphere. It is above him kids hang stocks for gifts. In this case, cardboard will be needed, plywood. Time to build a focus will take quite a bit. The easiest way out is to purchase decorative elements and glue them to the wall.

Drawing

By asking yourself a question, how to make a decorative fireplace with your own hands, you need to draw a sketch first first, calculate the amount of material required. The focus should look harmoniously, fit into the interior of the room, not to be an alien element in it. It is located in the niches, the wall, in the corner, where it does not hurt. For a small room, an almost flat focus is suitable with a depth of firebox to 30 cm, it is visually increasing due to the mirror installed inside. To fully enjoy the game of light, the furnace should be at the level of a person sitting. The optimal width of the portal is one and a half meters.

You can see the photo of the decorative fireplace with your own hands on our website. Someone will give an impetus to action, will help to decide which focus is suitable for your apartment.

Best Fireplace Material - Plasterboard

Most often for artificial focus use plasterboard.

It is easy to cut the usual stationery knife. Hopely the item, you can give it the desired form. For the "skeleton" of Falekimin will need a profile, its trimming will go on the ribs of rigidity, so-called.

Plasterboard sheets are fixed using self-sinks on the frame.

The seams between the sheets, the ends of the fireplace, the places of attachment of the self-tapping screws, and the decorative fireplace with their own hands from the drywall is almost ready.

The most exciting stage of work begins - decorative finish.

The focus can be painted, paste the film, apply the finish with artificial stone, pieces of glass or porcelain. It will be implicitly looked from polyurethane stucco, especially if it is painted under bronze and silver.

It will help to make a decorative fireplace with your own hands video posted on our website. The lattice will give the heart of reliability.

The fire shelf is made of artificial or natural stone, MDF, wood, drywall with tile or porcelain trim. In the furnace mount the backlight, or put candles. And you can enjoy the game of light or flame.

This article is atypic for the site, where the issues of heating and ventilation are considered, since it will be discussed about the popular homemade homemade - imitation of the fireplace in full size. Of course, the mooring is not able to fully replace with flaming firewood. But a beautifully decorated portal fits perfectly into the interior of the apartment and can decorate the free space along the wall or in the corner of the room. So let's see that from affordable materials will go to the manufacture of a false fireplace and how to make it with your own hands.

What can make decorative focus

To answer this question, we collected disparate information, photos and videos published on the Internet by homemade masters. If you put a goal to make an artificial fireplace yourself, you will surely find the appropriate material from the drawn list:

cardboard boxes (for example, from a TV) or a sheet cardboard, used as a package;
Chipboard, plywood usual and OSB, fiberboard;
plasterboard sheets (GLC), fixed on the wood frame or steel galvanized profiles;
facing brick.

So look simple crafts from corrugated cardboard

It's easier and faster to make a fireplace portal from a box from a TV or other household appliances. Bottic foci shown in the photo are unsuitable for many years of operation, but easily installed in the right place. As a rule, a fireplace of cardboard serves as an ornament for the new year and in other holidays, after which it is removed into the storage room.

From other materials, including foam, stationary models of false fireines are manufactured, capable of listening to many years. They are drawn up according to the interior of the apartment and in various ways create imitation of fire or furnish with candles. We propose to consider the manufacture of each option separately.

Council. Whatever the way of manufacture you choose, first determine the place for an artificial focus and sketch the drawing with sizes. This will simplify the calculation of the number of materials and selection of the design style.

Carton box

To work, you will need a simple set of tools - scissors, roulette with a ruler and a stationery knife. From additional materials, prepare PVA glue, old newspapers or paper and scotch. The homemade false fireplace is manufactured in different ways depending on the source material:

On the left, the uniform from the solid box, on the right - from 9 identical boxes

A large box from the TV is driven by the desired size, as shown in the photo. In the middle carries out the opening to imitation of the hearth, and the former facial packaging panel, divided by half, now serves as the walls of the niche - the butt fuel chamber.
Of the several cardboard boxes of the same size, it is easy to assemble a portal in the form of the letter "P", gluing them between PVA and Scotch.
Corrugated cardboard sheets will need to glue individual elements of the decorative fireplace - the framing, the premutoral platform with the base and the upper shelf, and then collect them into one. How to do it correctly, demonstrated below in the diagram.

To hide joints in the corners and in the middle of the portal, take them with old newspapers or paper. Another option is to buy polyurethane imitation of plaster stucco and close with decor elements all distressed places.

If it is necessary to strengthen the homemade design so that it does not "evolve" along and across its axis, install the cardboard ribs in the back side, putting them on the glue. The strengthening of thin walls is easily performed using the strips of the same corrugated cardboard, folded by the "accordion", as done in the photo.

Enhancement options - gluing internal ribs (left) and harmonic windows on a sheet (right)

Note. The technology of manufacturing the corner version of the fireplace is not distinguished by a used model. Only a large package will have to be exhausting otherwise, and from the same type of boxes to form sheets, and even then - the elements of the portal.

It is necessary to bend a large box to get an angular pseudocamin

The finished housing of the false fireplace remains to be separated by any selected way, for example:

clear with wallpaper imitating brickwork;
lining with bricks cut off with their own hands from thin foam;
decorate polyurethane or foam stucco;
encourage plastic panels with imitation of artificial and natural stone, masonry and so on.

For reliable fastening of finishing materials, use a polymer adhesive composition or an inexpensive adhesive gun. The final design is the staining of the product in the desired color (or several) acrylic or silicate composition intended for internal works. Master class on how at home is a decorative fireplace from the boxes, look at the video:

Fireplace portal of wood and plywood

In this case, you will need the following timber:

bar wooden cross section 4 x 4 cm - on basic (angular) frame racks;
the same, measuring 4 x 2 cm - for jumpers;
table top made of wood solid or laminated chipboard plate - on the upper shelf;
any cheap plywood - on the trim;
suitable finishing material - artificial stone, plastic panels, polyurethane moldings, tiles and so on.

The toolkit is also used available - hacksaw, drill, measuring devices. For fasteners, take ordinary black screws, if necessary, perforated steel corners and stripes. If the false fireplace is planned to be painted, acquire the acrylic composition of the desired color.

Wooden frame assembly with a fireplace board

Squeeze and cut the bars in size. At the same time, consider the thickness of plywood, otherwise the product will be more than you expected.
Collect the framework of the product, twisting the bars with screws and withsting 90 ° corners between the racks and horizontal elements. Make an extended base from below, and at the top of the rack immediately attach to a wide board playing the role of the shelf.
Install on the sides of the rigidity in the form of jumpers or shusin. Form the portal arch, attaching a horizontal bar at its upper point.
Attach the frame to the wall or the floor in the selected place and cut the plywood, including niche. If you want to get an arched arch, cut the corresponding rounding on the frontal sheet.

Finishing plywood sheets

Important moment. In the case when it is necessary to put an electric firebox with an imitation of the flame inside the artificial fireplace, the dimensions of the opening must correspond to its dimensions. Still a nuance: rear between the wall and the housing of the furnace, be sure to withstand the distance of at least 5 cm.

The easiest and most inexpensive version of the facing is to smear the slot between the plywood sheets with putty, clean it with sandpaper, and then paint. Another cheap way is to finish the PVC panels that imitate the brick, which is shown in the photo. How to fix this material correctly, it is described in the relevant article.

The fireplace shelf should be polished and covered with varnish if it is made of wood massif. Then it remains only to make a portal to make the impression of burning in the pseudo-fuel. Briefly and understand the assembly process is shown in the video:

We make a false coaming fireplace from drywall

Here you can go in two ways - to collect the portal on the wooden frame, as described in the previous section, or on the frame from steel galvanized profiles. Since the future construction carries minimal loads, the choice of material for the frame does not play a special role.

But the sequence of installation changes - the racks of this capital structure are initially attached to the wall. The procedure for such:

Using the drawing, apply the outline of the future decorative fireplace on the wall with a pencil wall.
With the help of dowels, attach over the lines applied on the wall, horizontal and vertical profiles (wooden bars).
Collect the frame of the wall and ceiling profiles for the installation of HCL, ranging from the side walls. Lastly, a niche of a fuel is formed.
We cut the frame with plasterboard and make all the joints with putty. Do not hurry to install the fireplace furnace - it is mounted after the finish finish.

When installing electrical stoves, the outlet in the niche will be very powerful

Note. In principle, nothing prevents the frame at first to collect the frame, and then scun her to the wall and to obey Glk. But there is one point: the angle between the floor and the wall is probably different from 90 °. Then one of the planes of your product will not learn to building structures.

The false fireplace, lined with plasterboard, has one important advantage - it can be separated by anything, including tiles, which looks very presentable. Therefore, we will not list the ways to finish the portal (from too much), and we will be offered to get acquainted with the next video on its assembly:

Almost real fireplace of bricks

Despite the complexity in the construction of such a structure and its cost, the brickwork will give the maximum approximation to a natural living hearth. Plus strength and durability - unlike GLK, the stone is not afraid of random shock loads.

Reference. The designs described earlier are fire-hazardous to one degree or another. It is worth the child to overturn the burning candle in the niche, and the cardboard or wooden product will quickly ignore. The decorative candle fireplace, built of brick, will not marry under any circumstances.

Portals from various types of bricks

Of course, for brickwork, a reliable basis is necessary, so that residents of apartment buildings are built on overlaps, such false fireplaces are categorically not recommended. Another thing is the first floor of a private house, where in the process of repairing floors you can lay the foundation in the form of a concrete slab.

To work, you will need a standard tool - trowel, a wide spatula and a construction level with a plumb. To beautifully put a decorative brick "in a wastelife", rent a special masonry pattern shown in the picture.

The template allows even a newcomer to lay the stones beautifully - in a wastelife

The brick imitation of the fireplace is laid out in such a sequence:

Determine the structure of the structure and pon it under the standard brick length - 25 cm. Recalculate the number of building materials and buy a ready-made construction mixture based on cement.
Clear the base, prepare the solution and lay out the first solid row, observing the horizontal along the entire plane. Then put the second row with the dressing, using the template. Podium part of the focus is ready.
Constantly controlling the vertical, build the walls of the false fireplace to the height of the furnace (approximately 60-70 cm), then overcase the opening with steel corners.
Put the last 4-5 rows of bricks and give a solo in the masonry to frozen for 3-4 days. Then set the top shelf of the tree or other material.

An example of a masonry scheme of the English fireplace. Such a big lingerie to you for anything, but here the principle of the construction of a stone hearth is displayed.

Council. You can build such a fireplace from any brick, including the used and old. Only it will have to clean well, and at the end of work - to paint either to cover with colorless varnish. As a basis, take the apartments of the real English fireplace, but without chimney and internal partitions: we only put the outer walls and the pseudo-fuel.

In conclusion - about imitation of fire

The manufacture of a decorative fireplace cannot be called completed without creating the visibility of the burning flame in the furnace. We offer a choice of several options, how to organize such an effect:

a popular way is to place a mirror mirror near the rear walls and put burning candles;
take advantage of new technologies - LED ribbons or candles (there are such);
hovering into the portal electrocamine, decorative furnace or biocamine with a real flame;
build small lamps;
put an electronic photo frame in the opening, equipped with a large liquid crystal display, and upload the image of a burning fire into its memory.

New-fashioned LED devices imitate heat, most importantly, - to make everything right. The photo shows a good example with a luminous ribbon decomposed on the perimeter. The composition can be supplemented with artificial firewood and other accessories are available.

If a few years ago, an artificial fireplace was a symbol of luxury and an element of an elite interior, today this kind of construction is available to almost everyone. Moreover, it is possible to assemble an artificial fireplace in the shortest possible time. First you need to choose the best material specifically for your interior, and then equip a decorative fireplace in accordance with a simple and understandable instruction.

Artificial fireplace can be erected from a wide variety of materials. First of all, think about how the finished artificial fireplace should look like. Choose a suitable style, dimensions, shape and decor elements.

Then carefully examine your storage room. It is possible that you have a sufficient amount of some material suitable for the arrangement of an artificial fireplace. Otherwise, focus on your own preferences, not forgetting to take into account the important characteristics of each available material.

If a traditional wood fireplace needs to be labeled exceptionally high-quality bricks with high refractory properties, it is possible to use absolutely any brick to lay out an artificial fireplace - although facing, at least some color decorative, although ordinary silicate.

You can immediately squeeze the masonry seams and your fireplace will accept an attractive appearance. At the end, it will only be installed to install the fireplace shelf. Brick artificial fireplaces are best suited for country-style rooms.

Consider the fact that the finished design of the material under consideration will have a sufficiently large weight, so before starting work, we objectively assess the quality and reliability of the existing overlaps.

Fans of eco-friendly materials should pay their attention on the designs of wood. You can use parquet, unedged and edged board. To give an aesthetic appearance, wood is covered by a verse or varnish. The fireplace itself is best placed on the platform made in the form of a pre-abs..

Wood - lightweight material, so the dimensions and the shape of such an artificial fireplace for the house can be practically anything completely for your taste. To connect the boards in the case of assembly of a small design, it is allowed to use glue. In the case, if the device is quite massive, use self-tapping screws, and even better - a complex connection of self-tapping and adhesive.

If you wish, you can come to the nearest furniture store, buy ready-made shields there and lay out an artificial fireplace of them. Specialty MDF and chipboard plates are suitable. Plywood is well suited.

Pre-plate can be painted in the desired color or salary with a decorative film. From the finished shields with ease, a fireplace portal of the desired size and configuration is collected.

The chipboard can even be lined with a cafeter or decorative stone. Here are already focusing on your preferences and affordable budget.

Wood fireplace with their own hands

Boards, Furniture Shields and Plates - All this is attached about one diagram.

First stage. Collect the frame of the artificial fireplace. It is best to use a galvanized profile for this.

Pre-sketch at least an elementary drawing of the future fireplace with the indication of the main dimensions. Cut the profile into pieces of the desired size with a hacksaw or special scissors.

Attach the vertical frame racks to the floor and walls using a screwdriver and self-tapping screws. At the vertical stands, attach horizontal crossbars for greater stability.

In the process of planning a step between frame racks, pay attention to the dimensions of the selected material for the trim, i.e. Width of boards, wood plates, shields, etc.

Second phase. Sample the plating board to the frame. If necessary, hang up the lower, upper or extreme boards to fill the entire space beautifully.

Third stage. Attach the wrapping to the frame using the screws. This will help you electric screwdriver. Screw the screws so that their caps go a little in the wood, and they were not noticeable later after the finishing finish is fulfilled.

Fourth stage. Close the place of installation of fasteners with decorative plugs. Color the trim, cover it with varnish or use another finishing material to your taste.

Fifth stage. Install the fireplace shelf. On it you can place various decorations.

Do you have skills working with metal products? Then you will not make any difficulty make a wonderful metal artificial fireplace. This design will look truly stylish and original.

Form and other design features depend solely on your personal preferences. Metal fireplaces fit in the interiors High-tech and other modern styles.

Metal artificial fireplaces are more complex in assembly compared to their analogues from other materials. Therefore, you need to refer to the work as soon as possible and do everything in full compliance with the recommendations received.

The first stage is the preparation of the plan. Deterocate the preferred form of the fireplace, the optimal dimensions of the design, consider decorative trim. Display all your ideas on paper indicating important sizes.

The second stage is marking work. Apply a label on the wall to place the mounts. If possible, try to make marking as accurate as possible, observing all levels.

Third stage - assembly of structural elements. Support of such an artificial fireplace will be a frame of an aluminum profile. Cut the profile into pieces of the desired size and attach them to the wall in accordance with the markup applied earlier.

Dial the frame and attach it to the wall using anchors.

Perform the installation of the protruding structures. Cut the frame of the sheets of the selected material. Usually, aluminum or stainless steel is used for plating. For more spectacular and beautiful design, metal sheets of different colors can use.

For example, the main faces you can make from light material, and ends - from the dark or vice versa. In terms of competent execution, this technique allows you to abandon the finish finish of the fireplace. Or you can enjoy the frame as the most ordinary sheet metal, and then simply paint it into the desired color.

Fourth stage - installation of equipment. Place an artificial fire in the assembled base.

If your chosen fireplace is not just a decoration, but also gives heat, adopt to the inner metal wall walls of the base of the thermal insulating material before it is installed. Mineral wool insulation are perfect.

The most popular and easy-to-implement option. The only difficulty for the newbie may occur at the design stage of the metal frame, you only need to practice a little.

Plasterboard is extremely easy to process and mount. You can, without much effort, cut the sheet on the workpiece of the required form, bend the plasterboard and perform other necessary actions.

Gypsum Kamin's fireplace

First stage. Make framework using wooden beams or metal profiles. Collect the 130x120x30 cm box from drywall sheets. The box should be without the bottom and rear walls. For cutting of plasterboard, use a sharp knife or hacksaw. Spread the box parts with mounting glue.

Second phase. Prepare from drywall base of 150x40x20 sizes. Install the finished "foundation" near the wall. For more reliability, glue the box to the floor using the mounting glue.

Third stage. Stick to "Foundation" collected previously design fireplace. Next to install the fireplace of the appropriate size.

Fourth stage. Make from drywall and wooden planks (frame) decorative chimney measuring 80x15 cm. The height is determined by yourself - from the fireplace board to the surface of the ceiling. Chimney stick to the wall and directly to the fireplace. Do this part of the design at your discretion, if you wish, you can do without it.

Fifth stage. Gently glue the ceiling plinth to the "foundation" and the main part of the structure. In the case of the main part of the design, the plinth should be glued under the fireplace shelf. Here it is better to place stepmate, using products of different widths to get a beautiful smooth transition.

Sixth stage. Install the inside of the plasterboard design of your artificial fire.

Seventh stage. Perform the finishing finish of the artificial fireplace. Here do the way you want. For decorations, you can use water dispersed paint, wallpapers, foam tiles and other suitable materials.

Finishing a fireplace. Possible variant

Pay attention to the proper decoration of the surrounding space. The wall near the fireplace should harmonize with it in style.

Very exquisitely, artificial fireplaces lined with stone looks stylish and expensive. Decorative tiles will make a unique charm in the surrounding environment and become a worthy decoration of almost any interior.

Fireplace of decorative stone with their own hands

Artificial fireplaces with stone facing look truly gorgeous. At the same time, the stone can be attached to almost any surfaces - at least to the brick, at least to the plasterboard, at least any kind of other materials. The main thing is that the base can withstand the weight of the finish.

First step. Clean the basis from any contamination thoroughly. If the stone is attached to the brickwork, pre-deepen the seams between the construction elements using any acute subject.

The second step. Secure the masonry grid on the entire factionable surface.

Third step. "Scroll" elements of the facing of dry. It is more convenient to do this on the floor or some other plane. Simply transfer the fireplace projection to the surface and decompose the elements of the facing on it. So you can adjust the stones in shape, color and other indicators.

Fourth step. Go to the fastening of cladding elements. To obtain the most high-quality and durable coating, start the facing from the installation of the thick tiles. For them, you will navigate and can understand which layer of glue to apply on thinner stones.

Boot the first tile in the bottom corner. Fully lay out the angle and go to the device of the upper horizontal row of lining. Stones will be attached towards the vertex of the fireplace before its foundation. For fastening the tiles, it is recommended to use glue specially designed for such materials.

Usually glue dries 2-3 days. Current time Specify the instructions for your media. Wait for the whole drying of the glue and set the seams. Pre-make sure that the selected grout does not leave traces on your facing. This can be done on some third piece of stone.

Decide the most suitable material for your case and proceed to arrange an artificial fireplace.

If none of the considered materials is suitable for you, you can show fantasy and create a truly original design. For example, some master make beautiful foci from large aquariums. It is enough to fall asleep the bottom of the tank with pebbles and install biocamine in it.

Good job!