How to make Pugach (matches) from clothespins? How to make a Pugach-Specchtroather! The easiest way to manufacture this adaptation of the Pugach is made of clothespins and matches.

In this instruction, we will take a boring clothespin and redo it in a powerful matchpower for matches and toothpicks, which is capable of sticking them into apples and the target for darts.

Step 2: What is a gun for matches?

A gun for matches is a mandatory element of your desktop weapon 🙂 This small pocket adaptation is capable of shooting with matches to a distance of 6 meters and stick to the toothpicks into apples, as well as a target for darts.

At the same time, this pistol can be very easy to assemble almost without costs.

Step 3: What do you need

All you need for brushpin crossbow, this is:

• Glue for wood
• Simple clothespin (wooden with metal spring)

Additional things that can help in assembling:

• Unnecessary paper
• Wooden lists
• Wooden toothpicks

Step 4: Create a small self-sustay

Show more 3 images

To create a gun, you first have to remove the spring and place the wooden pieces of the clothespins back to the back, so that their excavations are in the center.

Make a mark on the top of the clothespins at the excavation with a length of about 1.3 cm and another mark at the angle at the bottom of the clothespins (for clarity, see pictures).

For convenience, I painted the zones to be cut, a blue marker. Take the knife and gently cut all the zones painted in blue.

The long canal, carved in the center, will be used as a blow of a gun, so work on it, while the match will not slide on it without difficulty, while both parts of the clothespins are folded together.

The mark at an angle marks the place in which you need to make a small one. This sector is needed to hold the springs when you move it from the original location.

Step 5: glue wooden parts

It's time to glue the gun of the pistol.

Cover flat pieces of a layer of glue and squeeze them together. I fell a slide of glue on paper, and then gently ran flat parts of the clothespins over this slide, evenly distributing the glue over the surface.

After 5-10 minutes, the glue should be grapted enough to ensure that the spring can be installed.

Step 6: Dress Spring

With the dressing of the spring, I found that it will be the most convenient to first place the upper hook on top of the outer bed, then exacerbate the spring, "opening" it, so that the second hook of the spring can slip into the central cavity.

The spring should easily capture in place. Now the pistol is ready for use.

Step 7: Ammunition Options

Show more 3 images

The gun is designed for shooting by matches, so they should slide well in the dark.

If the blood was too narrow, you can expand the hole with a thin drill.

To charge our pistol, simply insert a match and press it on it, while the spring does not reach the rear spot. The gun will be destroyed automatically and will be ready for a shot. If the descent system does not work as needed, do not be discouraged - just work over it and donostend until the gun starts to encode. Each gun is slightly different from others, so everyone needs to be refined separately.

You can hold the device as an ordinary gun and when you will be ready to shoot, just click on the "trigger". You will be surprised how powerful it turns out to be such a small spring, it is inflicted for a split second and shoots charges to 6 meters away.

Now you can try to shoot with toothpicks - just remove one of the sharp edges by making it flat. From a distance of about 15 cm, the pistol will have enough power to stick the toothpick into the apple. Of course, the closer the pistol will be to the apple, the stronger the toothpick will enter it.

Step 8: Simple improvements

If your pistol barrel is too big and uncomfortable for shooting, then do not hesitate to modify it until it meets your requirements.

Now you know how to remake the usual clothespin in an interesting little desktop gun.

Every adult man was once a child. And the biggest entertainment in those happy childhood times was playing with friends in the yard. It doesn't matter what, the main thing to play. And what was most often played? Of course, in shootouts, war, guerrilla and a lot of things were still not listed. And if it was possible to shoot from something, it was the limit of dreams of any boy! Slingshots, self-timers and other charming of the world of boys just excited the imagination. And if you blow up something to the whole yard, then this is the top of bliss! And if you have the opportunity to shoot with burning matches for a decent distance? It was, as they say now, "hit the season"! We will tell you about one of the types of boyfriends. It is called Pugach.

Pugach is a device that reproduces noise. The main purpose of its creation is to scare someone. In fact, Pugach is considered to be a children's toy in the form of a pistol, which, when using pistons, publishes a loud clapping sound. But there are so-called "adults" Pugachi - idle chucks, for example.

However, there are also many ways to make Pugach at home. What can create this product:

1. from the copper tube and a piece of plywood;
2. from clothespins;
3. made of metal tube;
4. from bicycle needles;
5. of two bolts and nut;
6. from dowel, etc.

Show all

Pugach from the clothespin, or, as it is also called, "Spichkostrola", was invented for a very long time, when there was still a Soviet Union. The whole era of children was amused by this type of "weapons" when they played the war with friends in the yard. The design is so simple, and the materials for its manufacture were so available to everyone that only the lazy or those who did not hear anything about him did not hear anything about him. Compactness, simplicity of use and reliability provided adaptation very highly popularity. Another feature - from it could be shooting both ordinary and incendiary shells.

Nowadays, Pugach from the clothespin is no longer popular. One of the main reasons is that during the time of the USSR, the clothespins were wooden with a weak spring, and now they are made of plastic. Another important factor: now children have so many entertainment (Internet, games, films) that they are not even interested to make something with their own hands. And with the development of the Internet and social networks, you will rarely see in the courtyard of school children who would play for something.

However, there are still enthusiasts! For them, we wrote this article in which we will tell you in detail how to make the Pugach from the clothespins do it yourself. So, proceed.






Now we will now move on to the description of what needs to be done to create this miracle - weapons.

First stage

You disassemble the clothespin into three parts - you should have two wooden basics and spring.



Second phase

Using the pericoing knife, it is necessary to process both halves of the base of the clothespins, which is not at all difficult. First cut the chute on one of the wooden foundations. Do not rush, otherwise you can cut your fingers! Then divide the second half into two parts.



Third stage

Now carefully pull out the spring back to the groove so that her protrusion entered exactly in the chute. After that, you need to attach a short detail to the long one. In order to avoid mistakes, you should navigate the factory chute. The final stage: when everything fell as it should, it is necessary to make all the details of the rubber band. All is ready! As you can see, it is not difficult to make Pugach!



The next thing you must certainly do is to experience our creation. This is the most pleasant stage, right?

Check the product

To do this, perform the following actions:

1. 1. Tighten forward the upper part, while the spring is not its protrusion in the factory gutter. As soon as you did it, you should pull this item until the clothespin does not turn out to be in the groove that you did.
2. 2. Now you must choose a shell and charge it. Make it easy: slightly lifting up the top item. As shells, it is best in this case, matches or clips are suitable.
3. 3. Then we pull the spring until the starting strip is free. After that, a shot should occur. If so, cheers! You did everything right!

What if the device does not work?

The reason can be the fact that the second part of the spring is not held in its place. What should be done? It is necessary to deepen the chute in which the spring is held.

You will not believe, but even such a simple device can be upgraded! Yes, yes, do not be surprised. Now let's tell me how.

To the bottom of the pump, we glue the strip that cut out from the matchbox. Cut the fragment where the sulfur is located for the ignition of matches. As a result of such an improvement, at the time of the shot, the match will light up.

Security measures when using

Since Pugacha's projectile flight range can reach five meters, never use it at home or elsewhere. It is also impossible to aim in other people, children or animals. Also keep yourself away from flammable items. It is very desirable when using burning shells to wear glasses to protect the eyes, caution does not hurt. Successful use!

Nowadays in the store you can buy almost any children's toy, although their quality and usefulness is very dubious. And the Soviet schoolchildren often made toys themselves. For example, a matchpower. This homemade shoots not far, but is quite simply manufactured.

To make a matchpower, you will need a thin felt-tipper and a powerful spring. By the way, the spring can be removed from the lighter. Or from the mechanism of automatic ballpoint handle.

With the help of the hacksaw, saw the felt-tip pen into two equal parts. Then remove the writing tip, the rod, and the plug, which is located on the top of the marker.

Insert a small metal (or plastic) plate into the spring. This must be done in order that when using a matcle, the match did not fall inside.

Take the bottom of the felt-meter and place the spring in the neo. Close the top of the plug tightly.

So, the speaker is ready. To start using them, insert a match into the hole, press it with your finger and let go sharply. The spring will unfold and push the match. The shooting range of this homemade is about five meters and is entirely depends on the length and elasticity of the spring.

You can not be afraid to make a matchprocery, because the joint production of any craft is, this is a great time to feed, and the finished speaker will be anything that is not more dangerous in the gun of the gun shooting with plastic or rubber bugs, because matches in this case are not used for their intended purpose and they can Remove the sulfur head. Speckestrel can be made from a variety of primary means and materials, and in this case we will make it from clothespins for linen.

To make a matchpower from clothespins for linen, you will need:

\u003d\u003e Knife,
\u003d\u003e Lower clothespin,
\u003d\u003e Narrow scotch or coil of threads.

Selection of clothespins for making matches

Neither each clothespin is suitable for the manufacture of a matchpower, and it does not matter plastic it or wooden. It is important to take a spicker kit with a certain design. Clothes having inside the spring used as a strut and something like this will not fit.

For the arrangement of this option, it is necessary to use a sprocket with a spring without cutting from the inside and the pressed part of the clothespins outside. Such a spring will be used as a chicken and a mechanism that ejects a match from the matchpower.

Production of matches of clothespins for linen

After they found a suitable fit for a matchpower to be proceeding to its manufacture.

1. We will analyze our clothespin in parts, on the spring and two blanks.

2. From the outside of one part of the clothespin, we cut the groove with a knife or other sharp cutting instrument.

3. In another part of the clothespins, we do the exact same cutout and now you can connect both elements of the matchpower and see how it will look.

5. Now we have to choose one of the billets to do two more cuts, for which the spring will be fastened for shooting clothes. We make outer and inner transverse cuts and go to the sixth stage of the manufacture of matches.

6. This stage along one of the parts of the workpiece is cut through the channel for charging and shooting matches with matches.

7. In another workpiece, we make exactly the same channel.

9. In this stage of work with the help of tape or threads, we fasten both blanks and get ready-made matches, but without a juro and trigger.

10.This, our verses made a shot with the opening of its spring, which was pulled out of the clothespins at the very beginning.

12.Stranize the spring and fasten its edges in previously cut across the excavation. Insert the match and you can shoot from a matchpower.

13.After pressing the trigger, the inner part of the spring will drop out of the excavation and pouches the match from the matchpower.

For in order to make a speaker from the clothespin, the shot again, stretch the spring, charge it with a match and press the trigger.

Speckestrel from the clothespin was invented during the times of the Soviet Union. He was also called "Pugach" in common. Schoolchildren boys gladly used this "weapon" in their battles. Due to the simplicity of design and components, which are always available, the self-sustaining was very popular among students of senior and junior classes. Everyone knew how to make Pugach. This adaptation is compact, and it is possible to shoot from it as ordinary and incended ammunition. It depends on the individual desire. Although shooting with fiery shells had more psychological impact, as physical harm caused. The effectiveness of such charge is negligible. Now this weapon has lost its own popularity. To a certain extent, it was influenced by the fact that now the clothespins are mainly made from plastic, and a very weak spring has a very weak spring. Yes, plus to this, the bastard is lazy today and not much hardworking. But still there are still real connoisseurs of this simple weapons who would like to learn the process of its manufacture. Here for them further and will be talking about how to make Pugach with your own hands. In the hope that they will pass this secret to others, as a result of this, it will not be lost.

Basis of adaptation

How to make Pugach from clothespins - baby weapons from the times of the Soviet Union? The answer to this question is quite simple. Some people still use wood clothespins.

One of them can be taken as a basis in the manufacture of this throwing weapon, which can shoot with tight matches as a real combat gun.

Screw materials

In this case, the following is necessary:

1. Wood clothespin.
2. Rubber.

Instruments

Here you will need:

1. Penknife.
2. Protective glasses.

Ammunition

In this regard, you can use:

Manufacturing process

We now proceed directly to the question of how to make homemade Pugach.

For this you need:

Disassemble the clothespin itself into three parts. Namely: two halves of wood and a metal spring.

With the help you need to modify both halves. Make it is not difficult. First you just need to cut a small groove on one of the wooden halves. Do not hurry, your fingers are much more valuable to any clothespin. Then divide the soul mate into two parts.

Then the spring must be pulled back to the specified groove. Make it need carefully. So that her protrusion entered this very chute.

Then push the short detail to the long one. So that when assembling is not mistaken, before making Pugach, focus on factory grooves. After everything has become in its place, you need to make the elements of a rubber band. That's all. Pugach from clothespins is ready.

Remember that the tagged with a rubber band said wooden parts should be all a little sliding. That is, so that the upper part gives the opportunity to weigh the spring.

Check on "Boarding"

In the question of how to make Pugach, it is necessary to take into account the fact that this device must be ready for a shot. That is, it is necessary to check. To do this, you need to carry out the following actions:

1. Take the top forward. As long as the ledge of the spring is in the factory groove on its surface. When you achieve this, pull this item back. Until that moment, the ride of the clothespins is not in the groove you made at the bottom of the matchpower.
2. Then select the projectile and charge it, lifting the upper part of this device. In this case, ordinary matches or metal clips are ideal.
3. After that, pull the spring so that the launcher is free. As a result, a shot will occur. That is, the device works.

Cause of malfunction

Maybe so that the matchpower will not shoot. This may be due to the fact that another part of the spring scares from the place. Then you will have to additionally deepen the groove into which it comes. This malfunction appears from the fact that the depth of the groove is not the size.

Modernization of fixture

In the future, you can improve your Pugach. To do this, glue the fragment of the matchbox on which sulfur is located. It is easy to do. After such modernization, the matches will light up when shooting. This will add additional efficiency to this device. Also, part of the matchbox can be completely replaced by a piece of sandpaper. However, in this case, you will have to insert matches in Pugach's backward. It will not be quite comfortable. This problem is much easier to decide, setting up matches before shooting. In this case, you should not neglected the danger that burning shells carry. Never use them in the room, do not shoot in flammable items and desirable to wear and of course, and in no case are in any case in people and animals. Speckestrel is able to shoot at a distance of five meters, and sometimes even further.

Conclusion

After reviewing the foregoing, everyone will be able to understand the question of how to make Pugach - Speckestroke. It is only necessary in this case a desire, scrupulousness and hard work.