Simple ways to finish the inlet metal door from the inside. Finishing of slopes of the entrance door Facing the slopes of the input door from the inside

Practically in every home or in the apartment installed a metal door. It brings a sense of own protection, and protection of property from other people's people. With the arrival of cold weather, the problem of saving heat in the room comes. The question arises: how to shelter the inlet metal door so as not to spoil the decorative design of the entire room?

Example of trimmed inlets of metal doors

What to see the door from the inside? The construction market offers many types of material that can be sewed to the iron door, while make it an attractive, not spoiling a general view of the room.

Materials are divided according to their appearance, according to distinctive abilities, as well as on pricing policies.

Wood

The pricing policy directly depends on the tree breed. A distinctive feature is a smooth surface on which the background drawing is applied.

An example of a plating with a tree of metal doors

A wooden array panel looks nice, beautiful. The unique drawing of the tree texture creates the atmosphere of heat and protectedness. Depending on the breed, there is the possibility of choosing a color coloring. The metal door, covered with wood, looks rich, exquisite.

MDF, chipboard, xdf

These plates are less expensive, do not have heavy weight, have a form of a smooth classic surface.
MDF - plate (panel) does not contain poisonous impurities, created from wood sawdust with the use of raw materials, which protects the material from the exposure to the external environment.

Plugging panels MDF metal doors

Chipboard - analogue of MDF. It has a large range of color scheme, which allows you to select the tone desired for a common background.

EXAMPLE OF THE CLOTHING OF METAL DUE METAL

HDF - analogy of MDF. But, this type of material has a different pricing policy, is the highest quality, since the composition includes luxury trees - red pine, cedar.

Lamps and laminate

These types of skin are also created from wood. Application To create materials from various breeds of wood makes it possible to choose a color as well as the texture.

Laminated door sheat panels

Laminated by the door, laminate looks unusual, combining the attractive appearance and the safety of the heat indoors.

Shippuna

One of the finishing options is shippower.

The representative of this material is created from durable wood breeds that are not exposed to moisture and have a long time attractive, solid look.

Example of trimming doors by ship plywood

The shippower is processed by a veil, after which is covered with a special varnish capable of withstanding a negative temperature.

The appearance of the metal door with such a finish is expensive and representative. The main minus is the inaccessibility of this material.

Viniplast

This material is produced in the form of sheets. The material used is not plasticized polyvinyl chloride, as well as different additives that make material durable, immune to temperature and humidity drops.

Viniplast is divided into brands. To cover the steel door canvase, the most suitable WED is decorative. Material thickness up to 3 mm, which allows you to make doors warm, beautiful and not refined.

Leather Vinyl

This is a budget material for plating the door leaf. He has a lot of advantages:

The diversity of colors;
Various textures;
The cost is 210-300 rubles for the traffic point meter, depending on the color, texture, manufacturing material.

Options for plating metal doors leather vinyl

The material is not susceptible to high humidity, low temperature. But, he can break if the dog or the cat will scratch it, as well as if you wash the upholstery by chemicals.

Leather

One of expensive materials - from 1500 p. For the temporon meter and above. The thinner of the stretch of the skin, as well as its processing, the higher the cost. The material of the material also has a big impact on the cost indicators (pig - deer).

Skin samples for door sheat

How to shepherd metal door

After the final choice of material for finishing the metal door canvase, you should think about how beautiful, quickly and easily make the doorway with the heat not missing, while the appearance should be completely combined with the interior of the room. To see the door inside with my own hands will not be difficult, you should only be accurate in measurements and prevent errors. Not only appearance will depend on the accuracy of work, but also quality.

Metallic Sheet Finish

For greater convenience, the door should be removed from the loop. Then:

Laminate clamping

Sew metal door laminate easily. This will require:

Liquid Nails.
Wooden rails.
Electric jigsaw.

After the door is removed from the loops and is laid horizontally, the web preparation is carried out - all rusty stains are cleaned and processed, dust and garbage is cleaned.

After that, the laminate is going to the canvas. The electric jigsaw is supplied with a cloth under the size of the door leaf, where it is required to be mounted (respectively, the metal corners of the door remain outside the finish - the panel is laid inside the corners). On the door with liquid nails, a frame of wooden plates is glued (they must be treated on moisture exposure). The laminated panel is glued on the frame and it is left to dry.

Mounting process of laminate on the door

Laminated doors design options

After drying, the door is put on the loop, the holes for locks are made, the locking device is assembled and the necessary fittings are hung. The video shows the process of plating a metal door with laminate.

Metallic door dermal

Hanging the metal door dermatitin does not make difficulty. First you should make the doors clean. After that, glue is applied. First, the foam rubber is glued - as the insulation, after drying around the perimeter of the door leaf from the end glue for the material. After stitching the door, everyone should be left to dry. The last step will be cleaning the remnants of glue and hanging the fittings.

Dermatin door finish process

No need to forget about the clarity of the work done. All glued material should lie on the door to a smooth layer without having any folds.

MDF for plating metal canvas door

At the very beginning of the work, the door canvas should be prepared. It must be without traces of rye, without dust and garbage. From above, metal is placed by vinyl film. It is done for a good metal grip with MDF.

Example of door trimmed MDF

The process of plating does not take much time:

The canvas over time may lose an attractive appearance, and the owners of seriously thinking over their replacement. But this is not always reasonable - in most cases the position corrected the decoration of wooden doors.

To return the cloth a neat look, it is rich in different materials, adorn the fittings. Make it is quite possible on your own. To cover wooden doors, you will need:

scissors;
pencil;
roulette;
a hammer;
construction stapler;
construction and decorative nails;
mounting glue;
necessary fittings;
insulation;
passatia;
screwdriver;
ticks;
the material selected for finishing.

What materials are suitable for upholstery?

To update the door design, spending the minimum of time and effort, you can simply paint the cloth in any color. Sheathe the wooden door is a matter of more work cost and requires time.

For upholstery of wooden doors, different materials are suitable with their own hands.

Laminate It is a finish boards, with offstage, laid by waterproof paper. The modern building market offers many design options for this material: under the tree, stone, tile, etc. Thanks to this assortment, you can create a beautiful decorative design of the door in any interior. In addition, laminate provides excellent heat and sound insulation. But due to the hygroscopicity of the material, it is used only for internal sheat.

Plastic - finishing of polyvinyl chloride with the addition of chemicals that increase the stability of the material to high temperatures, the effects of ultraviolet and moisture. It is easy to install and care. A large distribution for finishing got a viniplast - durable, elastic material, easily secured with glue to wood, concrete, metal. Usually, the plastic does not cover the products outside, it mainly serves for the inner decor.

If the upholstery is selected, then experts advise to see the door leather-produced based on synthetic tissue. Such material is elastic, easily stretches, does not crack even at high temperatures, it has high strength, it may be of a wide variety of shades and is suitable for the upholstery and the inner, and the outside of the canvas.

Finishing doors mDF panels Popular due to the stability of them to the effects of moisture and mechanical damage. This is achieved due to the polyvinyl chloride film coating. MDF can be separated the entrance door with their own hands.

An excellent solution will shelter the old wooden door clapboard. This material is a wooden rack of a small thickness, equipped with special grooves for ease of attachment.

Shippuna Externally looks like an array of solid wood. It is processed by a veil and covered with frost-resistant varnish, so that it can be used for registration of entrance doors.

Preparatory work

Dismantling of locks, eyes, decor, handles.
Neat removal of old coating. The main thing is not to damage the sash.
Removing the web with loops and laying horizontally on a table or several stools.
Cutting material for finishing by setting parameters.

Upholstery dermatin

In the past, the leatherette was considered a luxury leatherette. Now this is an already accessible version of the decor, and it enjoys greatly popularity. A neat appearance, good heat and sound insulation properties make Dermatin an excellent solution to sew the door.

Wooden

The decoration of the doors from the tree can be performed with the inner, and from the outside. There are some differences in technology.

In the case of working with wooden products, they begin with the fact that they define the door opening scheme - inside or out. This determines the size of the size and the location of the sealing rollers.

Upholstery inner Dermatin do it yourself step by step:

FROM Outside The upholstery process looks like this:

The door is closed and 1 cm is retreating from the edge of the canvas.
At the bottom, slightly above the edge of the sash, fix the sealing roller.
Surride the insulation of the canvas, starting at the top and dropping evenly on both sides. It is important to prevent the provision of material.
The last stage is to cover the door dermatin, fixing the adjacent edges with nails. If desired, form decorative fasteners pattern.

Metal

Facing the metal doors Dermatin is a more complicated business. Most modern manufacturers supply doors already having an internal finish. But some inexpensive models do not have such elements and require independent upholstery.

Scheme interior decoration Metal door:

The steel sheet of the canvas must be chosen around the perimeter with wooden slats, attach the foam and close the crevices of the mounting foam. The resulting layer is closed with a sheet of plywood.
On the door, thoroughly pulling, applied the insulation, fixing it with glue or brackets.
Dermatin is cut down the sash sizes, leaving the resulting stock.
Fix the material from above, then pulling, lowered around the edges.

If desired, the pattern is created on the canvas using decorative elements.

Scheme external upholstery Metal doors:

According to the sash, the synthet or foam rubber linked, making it 8-10 mm less than the canvas.
Crop the dermatin according to the formula: the size of the insulation plus 6-7 cm.
Printed insulation on the door. It is necessary to wait for a while that the material is closed.
Fasten the Dermatin layer, evenly pulling out so that there is no savory. The edges are flex behind the ends of the canvas and fix it with glue.
Install the necessary accessories.

Clapboard

The lining is ideal for the upholstery of wood and metal products, entrance and outer canvases. Reiki is easy to collect, due to the fact that they are equipped with special grooves.

Wooden

Alone and with a minimum cost, you can shelter the wooden door with a lining. The technology is quite simple:

Prepare the door cloth to the upholstery by removing it and remove the old coating.
Place horizontally.
Crop the lining under the desired size.
Attach the first rake with the help of the finish nail exactly along the edge of the canvas. For adjustment to use the level.
The following panels are kept tight with the previous ones and fix it with nails.
Clean the ends at the end of work.
Treat the finished surface with varnish, wait until it dry, and install accessories.

Metal

This process is more complex. Preparation passes the same as in the first case. Reiki are cut to the required size.

Bold them on the door canvas in two ways:

use special fasteners (kleimers) to put the trim directly on the metal;
make a wooden frame from a narrow bar, and it is already to pull the rails to it, whileking them with each other and fixing nails. This option is well suited if an additional door insulation is planned: the thermal insulation material is packed under the doom.

Finish the work of the ends of the ends, processing varnish and the subsequent installation of the necessary fittings.

In most cases, finishing the entrance door from the inside is made with their own hands without any problems. However, in order to achieve a positive result, it is necessary to own the correct information. Next, consider all the nuances of this procedure.

First of all, consider how you can shelter the entrance door. Internal design involves less requirements (relative to the technical characteristics) than the external, therefore a greater variety of choice appears. The following options are most popular:

Plastic panels. PVC is an inexpensive material that has many advantages: ecology, variety of shades, high service life, ease of use, etc. The disadvantage is weak physical resistance.
Wood. Unusual and very luxurious option. You can make a very beautiful to place the entrance door. The only minus is low moisture resistance.
Paint. The canvas will not receive additional qualities (heat and moisture resistance), but the work can be performed in the shortest possible time.
You can also separate the iron door. This option is distinguished by the grace. Also actively use various matter, for example, velor.

Adhesive tape. The easiest and most affordable option. However, the service life of such material is very low.
Another simple option is to wash the door with a kit for the upholstery.

Above the most popular options above. In fact, there may be much more.

What can be done with wood

You can arrange the entrance door from the inside in different ways. First consider the option with painting varnish. Work is made in such a sequence:

It is not necessary to remove the cloth with the loops, but it is necessary to lay something on the floor, in order not to stain.
We dismantle the entire accessories (locks, handles, eyes, decorative elements, etc.). In most cases, there is enough screwdriver for this. If it is impossible to remove some kind of item, you can take it with scotch. It is necessary to do it as soon as possible, if you do not want to rub the residues of the varnish solvent.
We estimate the source surface. If it is not too smooth, process it with a grinding machine or manually (small emery).
Covered wood with protective impregnation. It is necessary to improve its moisture resistance.
After its complete drying, we apply a varnish (or paint). Do it better roller. We apply several layers, while each next is applied only after the complete drying of the previous one.

As you can see, finishing the entrance door inside the apartment with a varnish is very simple.

Now we'll figure it out how to make veneer veneer. For this we need iron and sheet of paper (clean). Work is done like this:

We put on the canvas (removed from the loops and get rid of the fittings) of the veneer strips and make fitting. It is necessary to achieve a matching pattern. If necessary, we make trimming. At the end it is desirable to numbered them - in this case, you will not confirm.
Singing the ends of the canvas (if possible).
We put the cooked stripes on the door in the correct sequence.
In turn, remove the protective film and glue.
To remove folds or bubbles, stroke a hot iron through paper.
If the slots appeared in the joints, they should be removed immediately. To remove the strip, it is necessary to warm up again and hide the knife (or spatula).

Such cladding of the front door is performed without difficulty in most cases. The main thing is to follow the perfect accuracy. This method (as well as the previous one) can also be used for metal.

Finishing of iron web

Remove the canvas, remove accessories.
All over the perimeter, we fix special wooden rails - they will be retainers. We glue them to liquid nails.
We make measurements and cut off the laminate. Observe the perfect accuracy.
We collect a shield from the panels, most tight. We make fitting, if there are errors, correct them.
We apply glue to the cloth and if indicated in the instructions we are waiting for a while.
We transfer to it the manufactured shield and press the cargo. It is very important only to the duration, but also the power of pressing.
We collect everything back.

Similarly, the technology of stickers of plastic panels looks like. The only difference is instead of some special PVC profiles.

In the end, consider how to separate the entrance door with the help of dermatine or skin. Such work is a little more complicated by the previous ones.

We disassemble the fully design.
First of all, it is necessary to stick to the surface of the foam rubber. First, cut off the required amount of material and only then we apply glue.

Tip: If you do not have enough skill, you can split a piece of foam rubber into two parts and glued them in parts. So you will just have time before setting.

With the help of a stationery knife, we cut the excessive excess.
Sut off our matter.
Now along the upper end we apply glue.
Glue to it the skin. It is necessary to achieve perfect accuracy, as in the future it will be impossible to correct errors.
Having achieved accuracy, we glue the matter for the rest of the ends (from top to bottom). At the same time, it is necessary to constantly smooth out the skin so that the folds do not appear - in the future they will be fixed in the future.
Making trims to install accessories, better with a shoe knife.
We remove all surplus (if any).
We put the fitness in place.
We proceed with the material protective compositions (if desired).

This technique allows you to improve the technical characteristics of the canvas (especially noise and thermal insulation). Therefore, it is popular to this day.

The most durable and high-quality door is metallic. Its inner side is part of the interior of the house or apartment, so it should fit into a common style; To this end, the inner finish of the entrance metal door may be required. High-quality interior decoration performs the following major functions:

thermal insulation;
noise insulation;
tightness;
aesthetics.

The door can be decorated with massive handles, high-quality locks, eyes and other fittings. Special elements of attachments are used, which allow you to stylize the finish under ancient, High-tech, Italian or Mediterranean style.

To begin with, it should be sorted out what the metal doors are. The best - steel, they provide maximum protection. Most often steel structures are hollow inside, which reduces their weight. There are also composite structures in which metal parts are combined with wooden. High-quality doors of this type are also quite reliable. Third type - aluminum. Despite the aesthetic appearance, the metal of such doors can be thin.

If the tools are allowed, it is best to give preference to a steel entrance door. And if you want to choose the best quality products, pay attention to the following parameters:

the door must be made of metal sheets of sufficient thickness;
it should have rigidity ribs;
special pins may be provided in the design, limiting the possibility of removing with loops;
internal insulation;
seals around the perimeter of the structure;
several castles of different types;
eyes with a large viewing angle.

The decoration of the input metal door should be performed with the following rules.

It is necessary to ensure sufficient insulation, because in severe frosts, the metal design can be wrapped so much that an inner appears from the inside. Therefore, from the inside the design is separated by wood, leather and other insulation materials.
The high-quality threshold finish and slopes without gaps, cracks and damage must be performed.
If the finish is made of wood, special processing of this material is required, which protects the surface from moisture and fungus. When finishing with other materials, you should also take care of their protection.
It should be possible to easily remove the design, and then install it in place, for example, to replace the lock.

Expensive way

Interior decoration should look impressive, have good resistance to mechanical effects. Therefore, natural wood is considered the best finishing option.

Array of wood

It is best to use an array of wood, and for a luxurious decoration you can choose the wood of valuable rocks: it is a rosewood, tees, a red tree. Oak panels are distinguished by special quality. This finish of the inlet metal doors will serve not one decade.

A less expensive option will be finishing with simple wood panels. In this case, the tree must be processed by protective means to avoid drying due to temperature drops. This finish can be covered with varnish and decorate with decorative elements. This is also a beautiful and durable option.

Budget way

If you have not planned to spend essential funds to the entrance door, there are many budget finish options. They are easy to operate, and if necessary, such a coating is easy to replace. In addition to imitating materials of materials, it is possible to use leather, dermatin, powder coating for the outer decoration of the metal door. All these options give a spacious imagination and allow the most elegantly to enter the finish into the surrounding interior.

Lining

Among the most common options in case you want to get a wooden cladding door - lining. In addition, the finish process is not too complicated, it can be performed with its own hands, and the trigger finish with their own hands will significantly reduce spending on repairs. To do this, you will need work tools that are in every home - hacksaw and a screwdriver.

If you are endowed with creative abilities, then the lining can not be laid in a straight line, but diagonally or alternate direction, creating interesting patterns.

Laminate

Laminated DVP, in everyday life, called simply - laminate. It looks neat, it is inexpensive. You can pick up the color and stylistics depending on the furniture, which is furnished by an entrance hall. If laminate is set on the floor, you can also perform everything in one style.

Dermantin

Dermantine often finished the doors to the Soviet era. This is a rather durable material that is well holding the insulation, but in front of sharp objects he is powerless. If the upholstery of the inlet metal door is made of dermantine, it is better to prevent damage. At the same time, not to do with point repairs, the insulation will break out and have to change the whole finish.

Artificial leather

This plastic material that allows you to make a beautiful surface. A wide variety of colors, a spectacular look, ease of cleaning - all this undoubted advantages. With such a trim, the inlet metal doors acquire a good sound insulation, and in combination with the trim insulation, this effect is enhanced. And for cleaning it is enough to wipe the coating with a wet cloth. In addition, this option is financially favorable.

Other options

In the designs of both composite and iron, upholstery fabric and wood are not the only materials with which you can perform upholstered inlet metal doors. There are several more options that are used in practice somewhat less often, but allow you to fully and carefully finish.

Wooden veneer

Veneer is thin plates of wood, which are removed using a planer. The slice can be completely thin - only a few millimeters. Due to this, the veneer can be spread in the form of a pattern and even form a mosaic from it. If you install the elements of the brass, you can design volumetric parts. To the veneered design should be taken carefully, avoid moisture and direct sunlight.

Veneer can be produced from natural wood or from MDF. Depending on this, it is possible to determine its durability - natural wood will serve longer.

If you are planning to purchase a wooden veneer, it is better to choose a glue-based product product. It is placed on the prepared surface, forming a drawing, after which it is fixed with a hot iron or in another way according to the instructions.

Powder coating

Powder spraying is a special paint that is applied to the metal surface with a sprayer. The paint contains protective polymers, which protects the metal from the effects of rust, as well as chips, scratches and other damage. This coating is universal and inexpensive, you can choose any color that will fit into the interior of the room. In this case, the insulation is installed inside the design. Metal doors with powder coating are well suited for minimalist interiors and chi-tech decorations.

Tools and preparation materials

The internal finish of the inlet metal door will require the use of the following primary means that can be used and at an external finish:

prepared panel or other elements (lining, veneer) that you will be attached to a metal base;
screwdriver for fastening work;
metal primer, if the surface is not yet processed;
fastening elements;
accessories that are installed after performing all the work - door handles, eyes, locks and decor.

In addition, consider that some finish options suggest a complete dismantling of the door to perform the necessary work. This applies to, for example, finishing with laminate and front panels.

The procedure for finishing the entrance group

If the surface is not prepared for work, it is necessary to first thoroughly clean the metal using sandpaper, then degrease the surface with the solvent and coat it with a good primer for metal. Now there are primers with which it is possible to make a coating and rust, but it is recommended to first perform a metal cleaning procedure. The primer will serve as the basis for the coating, protect the metal from corrosion and other detrimental effects. Such preparation must be performed before installing any of your chosen coverage.

When you were determined with the choice of material for finishing, you can start mounting. There are two ways to fastening facing materials:

fastening from the inside of the door canvase;
screening or gluing materials to the facial surface of the web.

Panels from the wood array, MDF, as well as panels from other materials are fixed with self-tapping screws. Top of self-tapping screws are closed with overlays.

If you install the lining, laminate or other typical material, you first need to prepare a frame of wooden rivers, which will be attached to the canvas using self-tapping screws. In the cavity is laid insulation, and on top set lining or other material, attaching it to the frame.

When cladding with artificial leather or dermatine panel is covered with the desired material, and then mounted on a metal surface.

Do not forget that when finishing wooden and metal doors it is necessary to install the threshold, the formation of slopes, the installation of seals for thermal insulation. To form slopes, the easiest to use drywall followed by plastering, and the voids fill the mineral wool. Often, for these purposes, they use a mounting foam, but there is a danger that it will cut emptiness, and the slopes are deformed over time.

If you are finishing with your own hands, then the slopes can also be separated by clapboard, it looks spectacular.

In addition, there is a variant of the formation of slopes for the front door with the help of plastic panels. It is the cheapest and easy way to implement the method, besides, plastic panels are perfect. Such panels look harmoniously in combination with doors treated with powder coating.

Paint metal

If you are planning to paint the surface, select high-quality paint. For such purposes, aerosol acrylic paints are well suited. They are distinguished by resistance when applied to a metal surface and have anticorrosive properties. Often they are used when staining doors that are used in difficult conditions. The undoubted plus is a large selection of shades.

Conclusion

A few more tips that can come in handy in work, especially if you are finishing with your own hands.

On the top slope, you can set the backlight in the form of point lights or LED tape. In this case, the light in the hallway can not include, limited to the backlight - it creates a cozy atmosphere, especially in combination with wooden panels.
For better sealing of seams, a transparent silicone sealant can be used. It will not be visible on the product, but reliably protect you from drafts from the street.
Before applying paint door handles, eyes and other elements it is desirable to remove or close them with painting tape. The paint is applied from a distance of 30 cm, distributing evenly. To cover the metal door, several layers of paint are required. Each layer must dry completely.
Beautifully look at metallic doors with wrought trim. Forged can be handles and decor. You can install the goals and decorate the door with brackets in the old style.

The latest technology reveal a large number of opportunities to us, and the interior decoration, including the choice of door trim, is now limited to the fantasy of the owner.

The entrance door is a business card of our dwelling, and many of us want it to look good and beautiful. After all, about the owner is often judged by its appearance.
With wooden doors, it's easier - after installing them, it is enough to cover with varnish or verses. But for more reliable protection of an apartment or house from not laid guests, most owners prefer to put the iron door.
The decoration of metal doors has several options that we will tell you about. Of course, the doors are sold already with decoration, but it is so united, especially cheap options that you want to do everything in your own way.
In addition, the decorative layer on the door will serve it with additional sound insulation. Perhaps you are quite satisfied with the quality of the old door, and just want to give her a more noble look.

For this work, various materials can be applied that can be placed in the installation method and the possibility of use.

MDF.

One of the most popular materials that can be finished with an inlet metal door can be made - this MDF.This wood and fibrous material is conditionally divided into three types: painted, veneered and laminated.
So:

As for the painted MDF, it is better not to use this option in this case, because the painted surface does not have a special strength. Leave it for interior finishing works.
Laminated MDF moisture resistant panels and have sufficient strength. The upper layer of PVC has excellent decorative properties: a smooth surface and a texture that imitates the natural tree.
Here they are great for finishing doors.

The most durable and durable view is veneered MDF. Here, the birch or oak veneer is used as a facing material.
Sometimes a veneer and more expensive breeds are ash, beech or mahogany. Naturally, the MDF price increases.

With the same success, the decoration of the metal inlet door can be performed using a laminate, which serves as a floor coating.

It is somewhat different from laminated MDF in its design, and has much higher strength.
The basis of the laminate is also a fiberboard, but a higher density, which is pressed with several layers of paper, impregnated with acrylic or melamine resin - a kind of "puff pastry".

With all this, its maximum thickness is only 1.2 cm. Therefore, it is very convenient to use the laminate to finish the laminate door.
Since this material is not afraid of ultraviolet, temperature drops and high humidity, they can be sewn not only the front door of the apartment, but the door of a private house emerging to the street.

Powder coating

This type of door decoration is made only in the factory. This is a very high-quality metal coating of powder paint, which is made by the method of electrostatic spraying and subsequent baking in industrial furnaces.
So:

Such paint is a small-crystalline substance containing substances that form the film. It never flashes on the surface, so the metal from corrosion is maximally.
Powder coating is not afraid of mechanical exposure, has dielectric and antistatic properties. A huge color spectrum allows you to create a coating with any imitation - even though skin, even granite, although gold.
Powder paint spraying is one of the most expensive decoration options.. Especially if it is metal doors with a wrought trim.
The cost of such doors may depend on the complexity of wrought elements.

Cleaning cladding

The finishing of the metal door can be performed by covering with wooden clapboard. This board is produced from different wood species, so the buyer can always find what he enjoyed and arrange at the price.

When finishing the door with a lining, there are a lot of space for design. Reiki can be placed at different angle, separated by decorative straps, covering thread, burn out, paint.
In the photo below, an excellent example of the design of the door with the board-lining board.

The question immediately arises: "How to separate the metal door with trees?". After all, it is not worth it to the metal nail.
The answer is simple: To do this, make a frame of thin planks.
They are attached to the door with self-reforms of metal, decorative rails are already stuffed on the frame. In order to create a soundproof layer, the internal cavity of the frame can be filled with insulation.

We talked about the most popular types of door finish. There are also options, for example: vinyl and leather.
In Soviet times, the most of the doors of citizens were finished. This is the cheapest option, but he outlived herself as the most continuing.
The most expensive finish can be considered the door decorated with an oak array. This is an elite product, such decoration is performed by the manufacturer in the process of manufacturing the door - at home work with such a solid tree is very difficult.

How to fix cladding

In this question, it all depends on the state of the door itself and the material you have chosen for finishing.
If it is MDF or laminate, then the panels are simply glued to the metal surface:

For better clutch of materials among themselves, the door surface must be primed. This is a necessary measure, otherwise the compound may not be durable.
To fasten the elements of the finish, you can use the glue "Liquid nails". As an additional fixation of the decorative layer, it can be fixed with metal corners.
In principle, the lining can also be fixed in this way. But the boards made of natural wood by weight is much heavier than the MDF panels, so the mounting of nails will be much more reliable.
In other cases, gluing is much preferable - nails will simply spoil the front side of the panels.

Sucks

Installing a new door, or an old trim, cannot be considered complete if the slopes are not covered. Sunshine is part of the wall, framing the door around the perimeter.
When dismantling the old door, they can be broken, if not structurally, so cosmetically. Finishing of slopes after installing metal doors is made in order to strengthen the mounting seam.
There are several possible options, and we will tell you about them:

The easiest and inexpensive way is shuttering. It is quite easy to do - only a tool is needed, called a template.
It is needed so that the angle of the slope is perfectly smooth. For clarity, look at the video.

The plaster mortar is mixed from a dry mixture on a plaster or cement basis, which are sold in bags of 25 kg. One bag of such a mixture is quite enough for one door.
First make the upper slope, and then you are starting to the side. When everything is ready, the plaster must completely dry so that its surface can be pulled out with sandpaper.
Then it is covered with primer - and you can even paint, even from the inside you can hurt with wallpaper.
If you do not want to stucify, you can make the slopes from plastic sheets or drywall. A small instruction, at the same time, you will not hurt.
Native what material for slope can be used, it is necessary, based on how the door is finished, or the wall adjacent to it.
If we are talking about the outdoor side of the discovery, which goes into the entrance, then here will have to: either shuffle it, or to graze the plasterboard, and then paint. Plastic can be used to finish the part that is inside the apartment if such walls are in the hallway.

To finish the slopes after installing the metal door looked harmoniously, it is better to use the material to be used to use the door. If we consider that MDF and laminate, most often have the texture of a tree, then the slopes can be made wooden, picking material in color.
Wooden slope on the entrance door will look applemented and beautiful. First, the mounting seams are sealed with foam, then the excess is cut off.
The wall is cleaned and processed by primer, after which the starting planks are mounted, which are attached to the wall of the dowels.
The first install the upper slope. It can be fixed with glue or self-drawing - their caps then need to close with decorative plugs.
Close up of seams of sleep with colorless silicone sealant and close with plastic corners or platband.

What is a good wooden trim in the input door - in it even you can arrange a backlight. Then you don't have to grope in the dark switch. Spotlights mounted to the top slope will automatically light up when the door is opened.