How to make a table and chair out of paper. Paper chair

A small paper chair can be used as a decoration or toy in a DIY dollhouse. You can make such a craft within 15-20 minutes.
To make it, you only need a piece of paper or cardboard and a little patience.

Simple origami paper chair diagrams

A miniature chair is very easy to make using the origami technique. To do this, you need a sheet of paper measuring 20x20 cm. Schemes for manufacturing can be found on thematic sites and downloaded from the Internet.

There are also many books on this technique. However, it is quite possible to experiment and create your own scheme. There is a very simple scheme for making a high chair, understandable to both adults and children.

Follow the strict sequence of actions:

REFERENCE! An ordinary chair from a simple origami scheme is easy to make in 5 minutes.

IMPORTANT! In the origami technique, strictly follow the recommended steps and try to make all the folds as accurately as possible with the smallest possible error.

Steps for making a chair out of paper with your own hands.

Consider the creation of a chair out of paper in stages. This option is quite difficult to perform and may not work the first time.

Read and repeat the following steps carefully:

• Take a square piece of paper and fold it diagonally twice.
• In this case, each time return the sheet to its original position.
  It is important to make the diagonals visible.
• Next, you need to get a horizontal fold line. To do this, we also bend the sheet and immediately return it to the unfolded form.
• We take the sides and connect them to each other so that we get a triangle.
• We bend the left edge and direct it to the center. This is a kind of mark at the bottom of the triangle.
• We direct the right tip to the resulting mark, and then tilt it downwards.
• We bend the lower part twice so that the product is thinner.
• We bend a small corner in half and direct it to the left side.
• Next, we straighten it. Insert a thin object into the corner.
• Then we straighten the corner and see a part that is very reminiscent in appearance of the leg of the future
  chair.
• Next, you should make another leg.
• In exactly the same way, we get a small but noticeable mark and bend the right side to the center. And we bend the left corner to the right side to the mark and bend the corner back and down.
• Then the lower part must be bent in half.
• All steps for the second leg are repeated in the same sequence. As a result of the work done, the chair already has two supports.
• We proceed to the manufacture of the third support.
• The second part of the right corner is tilted to the left.
• We tilt the lower corner back up to the line located vertically.
• We bend the left side to the right, and point the bottom corner up. We open, straighten and get a small figure in the shape of a triangle.
• We bend in half and get the third leg of the craft.
• The fourth support can be made using a similar and already proven technology as the previous one.
• We bend the sharp corners of each leg up.
• We make the back of the product. To do this, bend the top of the workpiece back in the opposite direction.

An easy way to make a cardboard chair

As a prototype, you can use an ordinary home chair or other furniture. It must be scaled to a miniature format and write all the dimensions of the future craft.

Consider the main steps in creating a cardboard chair:

• We draw on cardboard the components of the future product. These will be four strips for the legs of the chair, two parts of the seat, crossbars, backrest.
• First, let's make the legs of the chair. They are made from a sheet of paper folded into a tube.
• We connect the legs and the first part of the seat with glue.
• After the adhesive has dried, glue the legs to the second part of the seat.
• For greater strength and reliability, we make peculiar crossbars-partitions to the legs of the chair. Everything is like on a real big chair. They make the craft more stable, which makes it possible to put your favorite doll on it.
• We connect the back and seat together.

There is an easier way to make doll furniture:

• To do this, the cardboard sheet must be connected in the form of a cylinder with a diameter equal to the area of ​​\u200b\u200bthe seat.
• Next, you need to put the cylinder vertically and outline the height of the chair and its legs.
• Next, you need to cut out a piece of cardboard in such a way that you get a kind of ottoman without legs.
  So that the doll can sit on it, the empty space is filled with paper and the seat is glued.
• The chair is ready.
• You can leave it like that, or you can paint or decorate it.

ATTENTION! You can use cardboard of different quality and texture. It can be layered, matte or glossy.

conclusions

In such a simple way, after practicing on a chair, you can make a whole set of things for a dollhouse. This requires inexpensive and improvised means, such as cardboard, paper, scissors and glue. There are many worked out simple schemes in the origam technique.

And also such products will be useful for adults as exclusive elements for the interior. You can use more expensive and beautiful paper to make small crafts. So, original miniatures look beautiful. For example, it could be a table and two chairs. You can put small dishes on them.

We hope that this article was useful and will help you to make many interesting miniature things.

In interior decoration, paper furniture is in demand - you can make simple figures with your own hands. Another area of ​​application of these items is toys for children. Every child will want to have a dollhouse with beautiful handmade paper furniture. To make such products, you will not need additional origami skills, you just need to follow the instructions provided.

Origami furniture is an interesting area that requires special attention. The manufacture of such figures does not take much time, and the resulting result pleases adults and children with its appearance. The main feature of the products is the maximum similarity with real items of sets: sofas, tables, cabinets, armchairs and chests of drawers.

It is unlikely that such furniture will be used in real life, but the items will be a good option for creating a layout for a future room or designing a dollhouse. To achieve a similarity with real furniture, textured paper is used in the design, imitating various surfaces: stone, leather, fabric, wood and metal. When creating objects, it is better to use paint, which does not completely impregnate the material, but only gives it color.

The following materials are used for manufacturing:

• Base material - matchboxes, a little corrugated cardboard, colored thick paper;
• Pieces of fabric, decorative film and texture paper for finishing finished items;
• Scissors;
• Pencil or black pen;
• PVA glue or any other for working with paper.

You can work with paper on your own, or you can connect loved ones to the process. Then the resulting products will be diverse, but together they will form a single ensemble.

How to do the following options

You can make anything out of paper. You just need to show imagination and perseverance. Consider master classes in the manufacture of popular types of furniture. Based on detailed instructions, you can make other types of interior items. The most popular are:

• Sofa;
• Dresser;
• Armchair;
• Cupboard;
• Table.

To find out how paper furniture is designed correctly, you need to consider each option separately.

Sofa

A paper sofa will look great both in a dollhouse and in a miniature copy of a real interior. Before you start, pay attention to the paper sizes:

• For miniature options, you should choose colored paper 10x10 cm;
• For execution in medium sizes, you need to give preference to a workpiece of 20x20 cm;
• To create a large-sized sofa, the dimensions of the material increase proportionally.

The color of the paper is chosen at will, but it is better that it fits into the future interior or imitates real furniture. Having picked up the materials, you can start manufacturing:

1. A square sheet is folded in half, after which it is opened and folded perpendicular to the first;
2. The next step will be an additional hem. The bottom edge is wrapped to the middle fold line, then folded again. The output is 3 fold lines, not counting the central one;
3. The lower thin strip is wrapped on the first fold, after which two identical triangles are laid by bending the side parts diagonally;
4. The accordion is folded to the end, and the upper part of the workpiece is bent to the middle. The workpiece is turned over;
5. The lower corners are folded up in turn, and the upper ones are folded down diagonally;
6. The workpiece is turned over again, bending one corner inward. This is how the back is formed.

Turning the product over, it is necessary to form the legs of the sofa and it will be ready. Such a beautiful and original item will become a real decoration of a toy living room or an original art object.

Fold the sheet in half

One more time in half

We make three bends from the bottom

Making corners from below

Raise up the bottom

Making side folds

Aligning the back

Making legs

Ready product

Dresser

The most optimal and profitable way to create a paper chest of drawers is to use matchboxes. They are conveniently put forward, so making an item is not difficult. If you want to make a chest of drawers out of paper, then you should use paper blanks. It is convenient to store small light things in this chest of drawers. Beads, beads, locks, clips and other little things for creativity and needlework will perfectly fit here. The top of the chest of drawers can be painted with colored felt-tip pens, giving it an original look.

The design of a chest of drawers from paper consists of the following steps:

• Drawing a diagram for creating boxes: this step is skipped if ready-made matchboxes or other blanks are used;
• Cutting diagrams along the lines, as well as assembling boxes for future chest of drawers;
• The entire chest of drawers is glued with cardboard for strength, however, it is not necessary to glue the front part where the boxes will be inserted;
• The facades of the boxes are pasted over with any material - fabric, film, leather, and a bead or button is attached as a handle;
• Legs for a chest of drawers can be made from pushpins - for miniature furniture or pipes from toilet paper - for overall products.

Such a chest of drawers is also a good gift for a girl with a lot of jewelry: all the jewelry will fit in the drawers.

Making boxes

Creating drawer elements

Connecting elements

We decorate the coverings with patches

We glue the facades of boxes

Create pens

Finished chest of drawers

Armchair

Making a stylish chair out of colored paper is also not difficult. To create it, you don’t even need glue and adhesive tape, you only need a sheet of paper of the required color. It is worth noting that cutting blanks from beautiful textured paper will give a better result than furniture from ordinary plain material. In addition, if you find diagrams that show pieces of furniture made in various styles, you can make an armchair that is as similar as possible to real furniture. For work, you need one sheet of paper in the shape of a square. Its dimensions are selected depending on the dimensions of the future product:

1. Bend the square sheet in half, then open it and press one of the halves to the center fold line;
2. Press the second part of the square to the center of the workpiece. Next, go over all the fold lines with your hand to clearly outline the lines formed. Open the workpiece and turn the front side towards you;
3. One part of the 4 lines obtained must be cut off: this is done with scissors or a metal ruler;
4. Fold the workpiece across the resulting lines, visually marking the center, bend the triangle to the right. Do the same with the left side, you should end up with two triangles superimposed on each other;
5. The middle strip, remaining at the bottom, is bent over the triangles. Each fold line is additionally smoothed with fingers;
6. The strip, which was previously bent up, is bent - it will serve as a seat. The side parts will become handholds, they must be glued from the inside to the seat.

It turns out an original and easy-to-make chair made of paper. To diversify its surface, you can stick decorative paper imitating leather on the seat.

Cupboard

The design of the cabinet is similar to the manufacture of a chest of drawers, which was described earlier. The difference will be that the frame should be higher, and in addition to drawers, shelves are needed. Some of the nuances of making a paper cabinet:

• For the blank, it is necessary to use a scan from a rectangular sheet of thick paper;
• The ideal size would be A4 format, if you need a larger product - the dimensions increase proportionally;
• After you draw the diagram, it must be cut out: first, the main elements are cut out along the lines, after which they proceed to cutting the overhead valves;
• The frame of the model is glued without doors;
• The doors are cut out of the same paper. Later they can be decorated with a film: the adhesive layer of such material will allow you to apply it to the base without any problems.

Finally, decorative handles are glued to the doors. For this, buttons or beads are suitable. The legs are made from thick cardboard.

Table

Assembling a paper table is not difficult, especially if you already have experience with this material. There are many options for creating tables, but beginners should choose a less complicated way. It consists of the following actions:

• For work, a square sheet of paper is used;
• All sides of the square fold inward, forming mini-squares;
• Each square folds inward to form triangles;
• The triangles curve outward;
• The final step is the formation of the legs.

To ennoble the tabletop, stick beautiful decorative paper on it or paint it with colored felt-tip pens and acrylic.

decoration

A separate step is to highlight the decoration of finished products. Do-it-yourself furniture, the schemes of which can be found in this material, is decorated as follows.

If gouache is used for decoration, you need to mix it with PVA glue (1: 1). After drying, the paint will not be imprinted on the hands, and the product will receive additional rigidity.

Do-it-yourself paper furniture will be an excellent option for a dollhouse or designing layouts for a future interior. Making miniature items is a fun activity that everyone in the family can get involved in.

Drawings and diagrams

For children's games, a lot of things are required. In this case, you can not do without, which may require a lot. If the furniture in the toys does not fit in size, then you can make it yourself. In particular, our master class offers a step-by-step process for making a paper chair.

For work you will need:

• square sheet of paper;
• scissors;
• Scotch.

The final dimensions of the chair will also depend on the size of the sheet.

Steps to make a paper chair:

Fold the square in half.
After this, the edges need to be bent to the resulting midline. As a result, two more folds were obtained.
The square sheet is, as it were, divided into four parts, one of which needs to be cut off. We do this with scissors.
We fold the resulting workpiece in half.
We bend its right edge and form a triangular fold in the upper part.
You also need to do the same with the left edge.
We bend the right edge of our future chair towards the center.
We do the same with the left edge. These will be the sides of the future chair.
Slightly expand the edges and bend the central part up. This is the seat of our chair.
We give our workpiece the shape of a chair. Now it remains to fix the seat. To do this, you will need scissors and transparent tape. With small strips of adhesive tape we fix the seat from below (on both sides). Our paper chair is ready.

When a child has a doll, pretty soon every kid begins to think about arranging a home for her. With the modern development of toy production in the store for your favorite doll, you can buy almost any furniture or just a whole house at once. However, it will be much more exciting to equip everything with handmade items. This does not require any special skills or expensive materials, such as plywood, wood, metal or plastic. You can simply arm yourself with glue, scissors and paper. And how to make paper furniture for dolls, we will consider in this article.

How to make paper doll furniture

Today, there are many ways to make paper furniture. Each of them has its own advantages and disadvantages. Here are the most famous of them.

• Origami technique.
• Production of furniture according to drawings.
• Gluing according to color schemes.
• Weaving from paper strips or tubes.
• The use of matchboxes as a "building" material.
• Production of furniture from corrugated cardboard.
• Painted furniture.
• Production of paper furniture from combined materials.
• Papier-mâché furniture.

Although all these techniques are different, they use the same material - paper and cardboard derived from it. Whichever one is chosen, one rule is invariable for all: the manufacture of doll furniture requires special care and attention, because it is almost a piece of jewelry.

Requirements for paper for toy furniture

Considering the question of how to make paper furniture for dolls with your own hands, it is worth remembering that each of the manufacturing methods has certain requirements for paper.

Almost all of the above methods require thick paper from 90 g / m 2. It should bend well and not exfoliate at the bend points. However, for origami paper, you need less dense paper that can withstand repeated bending and maintain a beautiful look.

The same requirements apply to cardboard. By the way, for the manufacture of furniture from it, you can use both ordinary stationery cardboard and packaging corrugated cardboard.

If doll furniture will be made using papier-mâché or weaving, old newspapers or magazines are perfect as consumables.

How to make paper furniture with your own hands: origami

The simplest method of making furniture that does not require special skills, materials, and most importantly time is origami (the art of folding paper figures).

All you need is a square sheet of paper and a diagram of how to fold it correctly. No glue and origami scissors are needed (unless, of course, this is its modular subspecies).

When making doll furniture in this way, you should first practice on paper from a math notebook (because of the cells, it will be easier to fold). And, having mastered this technique, make a table, chair or something else from special paper.

Schemes on how to make a chair, table and sofa using the origami technique

As an example of how to make paper furniture with your own hands (step by step), below are three origami patterns. The size of the finished product, folded over each of them, depends on the size of the sheet. Having trained several times, it will not be difficult to calculate it relative to the growth of the doll.

The first diagram shows the paper technique.

It would be nice to add a chair to the made paper table. How to do this is shown in this diagram.

Instead of a paper chair, in addition to the table, it's a good idea to use a sofa assembled according to the diagram below.

for paper dolls without glue

Besides origami, there is another way to make paper furniture without glue. However, in this case, you can not do without scissors. They will be needed to cut doll furniture according to the pattern. Then you need to fold it.

A chair or slab made in this way looks more elegant than origami products. But when creating furniture in this way, you need to cut and fold it very carefully so as not to spoil it.

For printing such schemes, it is best to use paper with a density of about 100 g / m 2.

The finished product can be painted to your liking.

Making doll furniture from color schemes

In the old days, you could buy paper cut-out kits in almost any bookstore. Follow the instructions and use scissors and glue to make an adorable dollhouse or palace with furniture.

Knowing the basics of working with any graphic editors and the principles for constructing such schemes, you can easily make such blanks. If making a whole palace for a doll is not included in the plans, it would not be a bad idea to create a wardrobe, chair or bed and, after printing them out, make vintage furniture for your pet. Needless to say, only laser printing is suitable for this method, since inkjet printing, although more colorful, can float or simply fade over time when in contact with water.

As for the choice of glue for this furniture, it is best to use double-sided tape or It is also acceptable to use a glue gun, but very carefully.

Weaving from paper tubes, as one of the ways to make doll furniture

Weaving is a rather ancient and popular type of needlework. Today it is experiencing a new revival. However, modern craftsmen are increasingly using not a vine, but paper tubes or ribbons for weaving. The finished product is painted, and then varnished and in this form is able to serve for many years.

When choosing a way for yourself how to make paper furniture with your own hands for Barbie, it would be nice to take advantage of this: today the trend is becoming more and more fashionable to use paper wicker furniture in your homes.

Among the advantages of this technique is the elegance and strength of the finished furniture, as well as its realism. In addition, the materials will cost nothing, because these are unnecessary old newspaper or magazine sheets.

But among the minuses - in order to make doll furniture in this way, you must first master the weaving technique, as well as have a certain pattern.

But, having learned how to create toy tables, cabinets or chairs for Barbie, it would be nice to try your hand at making human-sized furniture.

Matchbox furniture

Among the most used materials for the manufacture of doll furniture are matchboxes. In fact, they serve as bricks for creating tables, chests of drawers, beds, etc. Moreover, if some masters simply paste over the finished product with colored paper or cloth, then others decorate furniture from matchboxes using decoupage, giving the product realism.

To make sure that a matchbox can be used to make very beautiful furniture for a doll, below is a tutorial on making a toy chest of drawers from two matchboxes. To complete it, you will also need stationery cardboard, black and white paint, double-sided tape, sandpaper and two beads.

Wardrobes, desks and kitchen furniture can also be successfully made in this way. The main thing is to have a lot of matchboxes in stock.

Furniture for cardboard dolls

Quite popular today is a technique that tells how to make furniture for dolls with your own hands from cardboard and paper. In this way, not only furniture is made, but also entire dollhouses.

For this method, it is most rational to use corrugated cardboard, the source of which can be any box from a parcel or some kind of household appliances.

Most often, furniture made of this material is pasted over with paper or cloth, sometimes painted. However, in recent years, eco-style has become especially popular. Following him, corrugated cardboard furniture is not painted, but left as it is. At the same time, do not forget: if something was printed or written on the front side of the box, it must be turned over so that the picture remains hidden inside the product.

It is worth noting that the manufacture of real modular furniture from corrugated board is becoming quite a popular trend in the modern world.

True, it is not very durable, but it is affordable and environmentally friendly, unlike plastic, and is easily recycled or transported when moving.

painted furniture

When choosing how to make paper furniture, do not underestimate the simplest ways. One of them is to simply draw furniture on paper or cardboard and place it in the dollhouse.

Of course, with voluminous furniture made according to one of the above methods, the painted decoration of the house cannot be compared, but as an option it is quite suitable for beginner dollhouse designers.

By the way, in addition to paper, you can draw on corrugated board. It is noteworthy that some modern designers are beginning to use the method of partial hand-drawn furniture for decorating real houses.

Furniture from combined materials: a master class on creating openwork chairs from paper and a coffee cup

When fantasizing about how to make furniture out of paper, do not neglect combining it with various improvised means, for example, with paper boxes of chips or coffee cups.

For example, an excellent cradle for a baby doll will come out of a small box in the shape of a cylinder.

And from a paper coffee cup in combination with paper strips for quilling, you get a very elegant doll chair.

The seat and legs of the future chair are cut out from the bottom of the cup. Two cotton swabs are glued between the legs to add stability. As a material for the back of the chair, the remaining paper from the cup is suitable. suitable for decorating the seat with weaving, as well as for making elegant curls on the legs and back of the product.

Papier mache

Among the many ways to make furniture out of paper, the papier-mâché technique (the use of paper mass and modeling glue) stands apart.

Most often, masks or some kind of figures are made in this way, however, it is quite suitable for doll furniture. Like paper tube weaving, the papier-mâché technique is very economical, but it is also simpler.

Furniture made in this way must have a frame and dry well before it is covered with paint or varnish. By the way, if you add a little gypsum to the paper, the product will become much stronger.

Each of the above ways to make paper furniture is unique in its own way. Some are complex, others are simpler. But whichever one is chosen, the main thing is to put your soul into your work. Then the result will surely please, and your favorite children's doll will have the best house in the world.

The little dollhouse owner will definitely want to furnish it with beautiful furniture and will ask her parents to help her with this. The house must have a sofa, table, bed, chairs and other pieces of furniture. Of course you can buy them. But it can be easily made with your own hands, using a minimum of funds.

Approximate Dimensions

Before thinking about how to make a table for dolls on your own and from what material, you need to decide on the size. It is necessary to build on the growth of the doll itself and the size of the house. The interior will look beautiful if all the furniture is approximately the same scale and style.

The easiest way to make all objects proportionally the same is to calculate the scale. It is necessary to divide by the size of the doll the average height of a person. You will get a number by which you will subsequently need to divide all the real dimensions of the furniture in order to get puppet ones.

For example, the doll's height is 20 cm. Divide the average person's height of 175 cm by 20 cm = 8.75. By this number, you need to divide the actual dimensions of human furniture to get the dimensions of doll furniture.

On average, dolls have a size of 7.5 to 15 cm. If the doll under which this or that piece of furniture is made fits these parameters, the following sizes can be used:

Furniture for dolls from matchboxes

This is just a godsend for creating a dollhouse environment. From them you can create a huge number of pieces of furniture:

An excellent material for making a doll set is cardboard. It is very easy to cut, and it is glued with ordinary PVA or hot glue. From an old cardboard box, you can make all the furniture in the house. The only disadvantage of cardboard- this is that without decoration and finishing on top with any material, it does not look very beautiful.

Corrugated packaging cardboard will not last long, as it quickly wrinkles and loses its shape. It is better to use scrapbooking cardboard or just thick cardboard.

Gluing a cardboard bed is quite simple. It is necessary to cut the walls of the bed of the required size and connect them with glue. The back can be decorated with wrapping paper or decorated using decoupage technique.

You can make a bed without the help of glue. The walls will be fixed with the help of grooves cut in the walls.

Production of paper furniture

If it is not possible to buy ready-made doll furniture, you can make it out of paper. How to make a chair out of paper so that it is strong and does not immediately wrinkle? Roll paper into tubes! Craftsmen have been weaving anything from newspaper tubes for a long time. Doll sets will not be an exception. Weaving patterns can be found on the Internet.. Such items will decorate the house and look very cozy. In addition, they will be quite durable if they are painted or coated with several layers of varnish.

To make paper furniture you will need:

From paper you need to twist thin tubes. This can be done with a knitting needle. They should dry well. Then the tubes need to be glued along with glue. It is better to use a hot gun, so the connection will be stronger and the paper will not get wet.

In this way, small blocks (walls) are glued together, which are then interconnected. They are easy to cut into the desired fragments. For better bonding, you can use wire or thread.

Then shelves and doors are made in the same way.. You need to fix the doors with tape or with wire.

Legs and handles are made from the same tubules, twisted into a roll. The edge must be glued with hot glue.

plywood dolls

A doll wardrobe for outfits can also be made from plywood. He will serve his mistress for a very long time. You can connect the walls and shelves to each other with hot glue or PVA. A hanger bar can be made from a wooden skewer or Chinese stick. Hangers are made from straightened paper clips.

A bed, table and chairs can also be made from this durable material. Some craftsmen even carve beautiful patterns on such furniture, imitating carved furniture. It looks very nice. Plywood needs to be painted or covered with fabric.

It is better to fill the sofa with cotton wool or foam rubber so that it takes shape, and then cover it with a cloth.

The table can be made as a square, and round with a jigsaw. The legs will be wooden skewers or sticks. Chairs are made in the same way.

Furniture from a cardboard box

From one TV box you can make all the furniture in the house. To create it you will need:

• The box itself.
• Double sided tape.
• Scissors.
• Plain wide tape.
• Glue gun or PVA glue.
• Materials for registration.

All furniture must be cut out, cut into the necessary parts and glued.

Then the most interesting process begins - finishing. Cardboard can be painted, pasted over with wallpaper or paper . On the cabinet front or a dressing table, glue a piece of foil, imitating a mirror. You need to make a tablecloth on the table, and pillows on the sofa - this will add comfort.

Be sure to involve the child himself in the decorating process. This is a great opportunity to feel like an interior designer and show creative thinking. Everything will be used: small pebbles, shells, beads, rhinestones, stickers.

After the completion of the design work, the arrangement of furniture in the house begins and filling it with details (vases, figurines)

Of course, the kitchen needs utensils. It can be cut out of cardboard, wood or molded from plasticine. How to make a bottle for dolls is a more difficult question. Here you can use bottles of drops for the eyes or nose, over perfume samples.

Wardrobe made of wooden rulers

Another quick way to create a doll wardrobe. To make one cabinet, you will need about six rulers. You will also need a jigsaw and PVA glue to work..

Cut and sand the rulers so that there are no splinters. Everything was glued with PVA glue. After complete drying of the product, it can be painted. For a beautiful even color, you need to cover the cabinet first with a layer of white paint, and then with the desired color.

In the same way, you can make tables, chairs, bedside tables and other furniture for dolls.

How to make furniture out of clothespins

It is not necessary to use wooden ones, plastic clothespins are also used. They are varied in size and color, but with wooden clothespins, the furniture turns out to be cozier and more beautiful.

To make a table or chair from clothespins, they need to be separated. Halves of clothespins are used, which are interconnected. Connecting them around, make a tabletop, legs can also be made from halves of clothespins.

The beauty of this material is that you can easily shape the clothespin to the desired shape or cut as much as you need. Some make theater on clothespins with their own hands. Templates can be found online.

Making furniture for dolls is quite an exciting process that you can involve the whole family in. Dad can be involved in creating objects, gluing, twisting and preparing for decoration. Mom and daughter will be happy to paint furniture, decorate it, sew tablecloths, pillows and bedspreads. This is a wonderful family activity that will make the little princess very happy.

Attention, only TODAY!