Make a circular saw from a circular saw with your own hands. DIY circular saw table

A circular saw is used to cut wood.

Using a hand saw is not always comfortable, using a table allows you to make the sawing process more even and accurate.

The cutting base has a plane resembling a disk, equipped with an outer edge with teeth. There are models not only of the manual type, but also with the possibility of fixing on the table.

It is difficult to work with large volumes of wood with a conventional circular saw, so it is better to install it on a table

There are several ways to acquire the latter for the convenience of performing manipulations. A table for a circular saw can be built independently, strictly adhering to a certain scheme.

Table device for a circular saw

The table is made taking into account the fact that the hand tool will be installed and fixed on the table, turning into stationary equipment.

Do-it-yourself construction of the element allows you to make the saw as suitable as possible for individual conditions. Difficulties in the process will not arise if you carefully study the issue. You can adjust the product to the desired size, distribute everything so that it is convenient for you.

Making a table for a circular saw is quite within the power of every craftsman

The self-made model will be one of a kind, which makes it unique.

Small desktop stand for circular

Deciding on design and construction

The simplest option for a circular table is a construction made of fairly thick plywood and boards.

The base can be made of wood or metal. For countertops, leafy tree species are chosen. It should make a special hole for the disk. The key property of the created table should be convenience.

Circular machine bed

You should take care of its stability. No loosening is allowed, otherwise it will negatively affect safety. The table top should be as flat as possible. This will reduce the risk of injury at work.

A table for a circular saw requires the presence of guides

The structure can be supplemented with a special riving knife. He can take off. It is equipped with a special disc protection that allows you to get rid of chips flying into the worker.

Circular table guide carriage

Some remove the factory casing and change the factory platform to a homemade one. If you are not going to cut at an angle, you can remove the parts that adjust the inclination of the blade.

Blueprints

Scheme for making a table for a circular saw

Before starting work, it is recommended to go through the preparatory stage. Be sure to make a drawing. This will make the design process easier. First calculate the dimensions of the table, then transfer the data to paper. The hole made in the structure must exactly match the dimensions of the saw. It all depends on the brand of equipment. Therefore, it is impossible to make a universal hole. The base must be stable and well withstand mechanical loads.

Do-it-yourself circular table drawing

It is unacceptable to hang the structure to one side. The dimensions of the worktop must be suitable for the sawing flow. The final option is determined based on individual desires. Some work comfortably with a folding table or a product with small dimensions.

Drawing of a universal desktop machine

The drawings should take into account an important point. If you plan to leave tools or materials on the table during work, then the dimensions of the countertop must be increased to a square meter in area. A suitable size would be 120 by 120 cm. You should draw carefully and slowly in order to do everything correctly.

Scheme of a table for a circular table with a detailed description

Necessary materials

Homemade table can be made of wood

For such a table, wood, plywood or chipboard can be used. Also suitable for MDF and chipboard. Some prefer to choose steel or aluminum.

Steel Plate Circular Machine Table

It is not recommended to use plastic, it is completely unsuitable for a table of this purpose. If wood is selected, then after assembly is completed, the product should be treated with a special antiseptic composition. This will provide reliable protection against moisture and help to avoid rotting.

To make a saw table yourself, you need to prepare the materials.

1. Selected raw materials for the base. The thickness should be 21 mm.
2. The beam needed for the frame. Suitable edged board 3 meters long with dimensions of 50 by 150 mm. All you need is 5 pieces.
3. Dowels made of wood with dimensions of 10 cm. At least 12 pieces.
4. Joiner's glue.
5. Metal fasteners in the amount of 4 pieces.
6. Metal corners. Enough 10 pcs.
7. Self-tapping screws.

These elements must be prepared in advance and placed near the workplace.

Required Tools

In addition to materials, tools should be prepared.

Among them:

1. pencil and marker;
2. measuring instruments, including a meter and tape measure;
3. jigsaw;
4. manual frezer;
5. grinding machine;
6. sandpaper (should have medium or fine grit);
7. planer and drill;
8. screwdriver

You need to prepare everything in advance and keep it on hand throughout the process.

Manufacturing process: step by step instructions

Marking the place where the saw is attached to the table

Marking and fastening of stiffeners

Finished tabletop for circular saw

To make a quality construction, you need to follow some tips. The process consists of several steps presented in the table.

Fixing legs to the table

Attaching the saw to the tabletop

Fixing the start button

The design is completed and ready for use. When performing the described manipulations, it is important to remember that safety measures are observed. It also applies to any manipulations with a circular saw.

Regularly check the position of the table and its strength. The design must be stable, without loosening.

An example of a manufactured desktop for a circular saw

Table option for a hand-held circular saw with a lift mechanism

First make sure that the saw is securely fastened, only then turn it on. Do not hold the cut material with your hands. This will help keep the wood from getting in your face when the knots start to bounce. In addition, it is recommended to use special protective goggles when working.

Be sure to use protective goggles for your safety.

These simple tips will help you avoid injury in the workplace.

Video: Circular table made from improvised materials

A circular saw is a tool that no craftsman can do without. Such a unit is especially necessary in the country or in a country house. But working with a hand tool is not always convenient, and branded machines are quite expensive. The way out of the situation may be the independent manufacture of such a device. The basis of such a home machine can be not only a hand saw, but also a grinder or even a drill.

Making a table for a circular saw with your own hands will cost much less than a ready-made store version.

It is not at all difficult to assemble a fairly simple frame for a circular saw with your own hands. To make it, you will need the simplest lumber and very little time.

Saw frame design

Before considering the design of the future machine, it is necessary to calculate the load that will fall on it. Because the main thing in such a bed is stability and reliability. For powerful industrial saws, the base is a reinforced steel welded structure. But such a unit is not needed for a home workshop. If you are only going to assemble your own woodworking machine, then you should take into account the main parameters of the tool itself. After all, saws are different, and, accordingly, the design of the table should be different.

First of all, it is necessary to take into account the power of the tool. Usually, for a home workshop, a unit is chosen whose parameters do not exceed 800 watts. But, for example, when building a house or a summer house, a fairly large amount of wood has to be sawn. At the same time, the power of the circular saw should be greater. But experts do not recommend purchasing saws whose characteristics are higher than 1200 watts. Installing such a tool in a private workshop is not justified. And working on it will only increase the cost of electricity.

Remember: the higher the productivity of your machine, the more stable the base must be for it. For professional circular saws, a base assembled from a metal profile is usually mounted. Sometimes such beds are even embedded in the floor. Because the vibration of the machine can lead to situations that are dangerous to life and health.

Back to index

Nuances to consider

The second parameter for choosing a saw is the depth of the intended cut. The thickness of the lumber processed on your machine depends on it. This parameter of professional and semi-professional models ranges from 4 to 7 cm. This is enough for sawing boards and even thick enough plywood. But it will be inconvenient to process logs on such a machine. In addition, it should be borne in mind that this characteristic of a saw that is built into the frame with its own hands is decreasing. The cutting depth becomes less by about 1 cm. But this can be changed if the table design provides for the ability to raise or lower the disc.

When choosing a tool, it is necessary to take into account the frequency of its rotation. If you need a circular saw for harvesting building material, then this parameter may be lower. When a smooth and clean cut is needed, the RPM must be high enough. This is necessary, for example, for the manufacture of furniture. But even in this situation there are nuances. For processing plastic materials, such a saw is not suitable. Due to too high tool speeds, the disc heats up and the plastic melts. Therefore, it is worth choosing a unit whose rotational speed does not exceed 4000 rpm, in which case the table for a circular saw can be assembled from wood. The vibration of such a machine is insignificant and additional reinforcement of the frame is not required.

The last thing you need to consider when making your own woodworking machine is the location of the buttons and other controls. When assembling a circular saw with your own hands, remember that access to the controls must be safe. This rule is especially true if the tool is installed from the bottom of the countertop. In this case, it is more reasonable to install the panel with switches from the outside of the machine. Or provide a rising tabletop. This design will also help in the maintenance of the unit. After you have taken into account all the little things and nuances, you can proceed directly to the manufacture of the table.

Back to index

Preparatory stage of work

The simplest version of a table for a circular saw is a structure assembled from boards and fairly thick plywood from which the table top is made. In this case, the tool itself is fixed at the bottom of a stationary (not rising) table top. A special slot is provided for the disc in the bed cover. A drawing of such a machine is shown in fig. 1.

The dimensions for the bed can be changed so that it is convenient for you to work. The average table height is taken as an example. It is 100-115 cm. But a lot depends on the height of the person who will work with the tool. In addition, the length of the tabletop can also be changed as desired. If you intend to work with boards whose length exceeds 2.5 m, then the table top should be larger. Then it is necessary to make changes to the design itself and add an additional pair of supports (legs). Otherwise, the bed will vibrate too much.

For the countertop, you can take plywood, whose thickness should be at least 50 mm. But you can also use fiberglass plates, plexiglass. But experts do not recommend using chipboard, since this material is not strong enough.

The table top can be polished and covered with several layers of varnish. This will ensure sufficient sliding of the sawn materials. But it is much more reasonable to strengthen a sheet of iron on the countertop. Then the surface of the bed will be much more reliable, and the machine will last you longer.

Back to index

Necessary materials and tools

For a woodworking machine, it is imperative to provide for the presence of guides. They will help to cut the material accurately. This design is welded from a metal corner and attached to the countertop with clamps.

It is not recommended to install stationary guides, because in the future you will not be able to change their position.

To make a table, you will need the following materials:

• plywood sheet (countertop made of another material);
• sheet of iron;
• board with a section of 5 * 10 cm;
• timber with a section of 5 * 5 cm;
• clamps - 2 pcs;
• metal corner for guides;
• hand circular saw.

In addition, it is wiser to prepare in advance all the tools that will be needed to make the table:

• jigsaw or hacksaw;
• electric drill, screwdriver;
• milling machine or hand mill (you can do without this tool);
• measuring instruments (ruler, square, tape measure).

When everything you need is ready, you can proceed directly to the assembly of the table. Some craftsmen make beds from old kitchen or dining tables. But such a design is unlikely to last long enough. Therefore, it is much more reasonable to make all the details yourself. In doing so, you can take into account your individual needs.

Back to index

Saw table assembly

The manufacture of the frame begins with the formation of the tabletop. The plywood sheet is marked so that 2 edges of the cover coincide with the edges of the sheet. The workpiece is cut with a jigsaw or hacksaw. If desired, the saw cut edge can be processed with a cutter. But this operation is not mandatory. Since in a table for a circular saw, the main parameter is its reliability, not beauty. The tabletop is treated with sandpaper “roughly”.

On the underside of the tabletop, a slot for the disk is marked. To do this, you first need to measure the dimensions of the sole of the unit. The easiest way to do this is to remove the disk from the tool and simply circle the necessary part of the saw. These parameters are necessary for the formation of the footprint.

With the help of a hand cutter, wood is selected to a depth of about 0.8-1 cm. If you do not have such a tool, then the work can be done with a chisel, but it will take much more time.

After the seat is ready, be sure to try on the saw, adjusting the recess if necessary. Mark the fixing points for the fasteners and the slots for the disk. If you want the saw blade to go down and up as you wish, then you need to build a pendulum mechanism for the table. In this case, the slot should have the shape of a truncated pyramid. Moreover, the hypothetical top of this figure goes down. An example of a drawing of such a design with a belt drive is shown in fig. 2. It is more reasonable to make the frame for the lifting mechanism from metal corners that are welded together.

A circular machine is the tool that no home craftsman can do without. This equipment is especially relevant for a country house or cottage. But working with a manual machine is not always convenient, and factory machines are quite expensive.

The way out of this situation can be to make this device with your own hands. The basis of this machine can be not only a hand-held circular saw, but even an electric drill or grinder.

Making a frame for a circular machine with your own hands is very simple. For the manufacture will be needed the most ordinary lumber and quite a bit of time.

Before thinking about the design of the upcoming machine, you need to calculate the load to which it will be subject. The main thing in the frame is reliability and stability. For powerful production saws, the basis is a welded reinforced metal structure. But for do-it-yourself use, such a unit is not needed.

If you have just decided to make your own woodworking machine, then you need take into account the main parameters equipment. Since saws can be different, naturally, the design of the frame can also be different.

First of all, you need determine the power of the tool. As a rule, for home use, equipment is chosen where the power parameters do not exceed 850 watts. But, for example, when building a summer house or a country house, it is often necessary to saw a very large amount of wood.

That is, the power of the circular is required more. But experienced craftsmen do not advise buying saws where this figure is more than 1250 watts. Installing this equipment in a home workshop is absolutely not justified. And working on it will only increase the cost of electricity.

The greater the productivity of the machine, the more stable the base is needed for it. For professional circulars, as a rule, a base is installed, welded from steel profile. Sometimes these beds are even concreted into the floor. Since the vibration of the device can lead to danger to life.

Technical features of circular machines

Depth of the intended incision. This parameter determines the thickness of the material that will be processed on your machine. This indicator in semi-professional and professional machines ranges from 5-8 cm. This is quite enough for cutting boards and thick plywood.

But it will be inconvenient to work with logs on this machine. In addition, it must be taken into account that this characteristic of a homemade saw decreases. The depth of the cut will be approximately 1 cm less. But this can be avoided if the table frame is provided with the ability to lower or raise the disc.

When making a tool with your own hands, you need take into account the frequency of its rotation. If you need a circular for the procurement of building materials, then this figure may be less. If you need a clean and even cut, then the speed is needed quite high. This is necessary, for example, for the manufacture of furniture.

But even in this case, there are certain nuances. This saw is not suitable for cutting plastic materials. Due to very high tool revolutions disk is warming up and the plastic starts to melt.

Therefore, it is better to choose an apparatus where the rotational speed is not more than 4500 rpm, in this case the frame for a circular saw can be make from wood. The vibration of this machine is low and additional strengthening of the table is not required.

Well, in the end, what needs to be considered is the location of the buttons and other controls on your machine. When assembling the saw with your own hands, do not forget that access to the control panel should be safe. This rule is all the more important in the case when the open part of the saw is at the bottom of the table top.

In this version, the panel with switches is best placed from the outside of the machine or make a rising tabletop. This design is also convenient for servicing the device. Then, when you have taken into account all the nuances and little things, you can begin the direct assembly of the table.

Making a circular saw with your own hands

The simplest version of the frame for the circular is a structure made of boards and thick plywood. Moreover, the tool itself is attached to the bottom of the stationary tabletop. A special slot is made for the saw in the table lid.

The dimensions for the table can be changed as it will be convenient for you to work on it. For example, an average table is described, the height of which is 110-120 cm. But a lot depends on the height of the person working with the equipment. Also, according to your desire, you can change the length of the tabletop.

If you plan to work with boards that have a length of more than 2.6 m, then the cover on the frame will need more. In this case, it is necessary to make changes directly to the design and additionally add some supports(legs). Otherwise, the table will create strong vibrations.

For countertops usually plywood is used, which has a thickness of at least 5 cm. But you can also choose plexiglass or fiberglass slabs. But professionals do not recommend using chipboard, this material is not reliable enough.

Tools and materials for assembly

For a circular saw, it is imperative to provide guides. They help to cut wood much more accurately. This design welded from steel and fixed to the lid with clamps.

It is undesirable to fix stationary guides, since later you will not be able to change their position.

To build a table, you will need the following materials:

• sheet of iron;
• plywood sheet;
• beam size 50 × 50 mm;
• board size 50 × 100 mm;
• steel corner for guides;
• two clamps;
• hand circular saw.

You also need to pre-prepare all the tools that will be needed to assemble the table:

1. Screwdriver, electric drill.
2. Hacksaw or electric jigsaw.
3. Measurement tools (tape measure, square, ruler).
4. Hand mill or milling machine.

When everything is prepared, you can begin to assemble the table itself. Sometimes craftsmen collect countertops from unnecessary dining or kitchen tables. But this design is unlikely to last long. Therefore, it is much more reasonable to make all the structural elements with your own hands. In this case, you can also take into account your personal needs.

Making a tabletop for a circular machine

The assembly of the table begins with the manufacture of the countertop. The plywood sheet is marked so that the two edges of the cover are in size with the edges of the iron sheet. Plywood is cut with a hacksaw or a jigsaw.

The edge of the saw cut can be processed with a cutter, but this operation is optional. Since in the frame the main parameter is reliability, and not an attractive appearance. The tabletop is rubbed “roughly” with sandpaper.

From the bottom of the tabletop mark slot for circular circle. Why first you need to measure the dimensions of the sole of the unit. The easiest way to do this is to unscrew the disk from the device and simply circle the desired part of the saw. These measurements are required to determine the footprint.

With the help of a hand cutter, bars are selected to a depth of approximately 0.9-1.1 cm. If you do not have a cutter, then this work can be done using a chisel, but it will take much more time.

Then, when the seat is made, try on the saw and, if necessary, correct the recess. Mark the slots for the circle and fix the fasteners. If you want the circle to rise and fall, then you need to install pendulum mechanism for table top.

In this case, the slot must be made in the form of a truncated pyramid. In this case, the hypothetical top of the pyramid will be directed downwards. Directly frame for hoist is best make from steel that are welded to each other.

Making a table frame

The markings for fixing the transverse rails and longitudinal ones, which act as stiffeners, are best installed on the wrong side of the countertop. The planks themselves are made from a bar. You will need:

• Two transverse parts, long equal to the width of the countertop minus 7-9 cm on each side.
• Two longitudinal ribs, equal in size to the length of the cover minus 7-9 cm on each side.

Then you need make nests for screws. The slats must be fixed on the lid so that the tabletop extends 7-9 cm beyond the edges of the frame. The fasteners must be as reliable and durable as possible.

The first fastener must be installed approximately 40-50 mm from the edge of the rail. The distance between the screws is approximately 23-25 ​​cm. All details need to drill through. The self-tapping screw is attached from the side of the lid so that its head is completely recessed into the tree.

First fix the transverse ribs. To make the table cover as strong as possible, the edges of the rail must first smear with carpenter's glue. The structure is fixed with clamps, and without removing them, screws are screwed in.

The tabletop is allowed to dry completely. After that, the longitudinal rails are installed in the same way. Then the parts of the frame are pulled together with two fasteners on each side. Now the clamps can be removed.

Mounting legs (supports)

Table legs are made from timber. The height of the supports is selected individually. In practice, it is most convenient to work at the machine when the worktop located at hip level. Before fastening, each support must be planed so that the leg descends from below to an angle. So, the area of ​​the base of the support should be slightly larger, in contrast to the area of ​​the top.

It is best to secure the legs with steel corners. They need to be slightly pressed so that the base of the machine is in the "strut". This gives the table extra durability. Bolts with washers are used as fasteners, they are fastened with caps outward. Otherwise, during operation, you can be injured on the protruding parts of the fasteners.

The whole structure will be more stable if additional supports are pulled together with diagonal rails. They are attached in pairs from each side of the machine.

Cover surface polished and varnished or use a steel sheet for coating, which is mounted on self-tapping screws. At the very end, on the prepared place, the tool is attached directly.

On the table top additional markup, it will help to cut wood evenly and correctly. The control panel of the circular saw is located on the outside of the machine. As a rule, it is mounted on one of the legs of the table. That's all, the circular saw with your own hands is ready.

Comments:

Many owners of hand-held circular saws are thinking about their improvement, since this necessary tool in the household, with all the advantages inherent in portable devices, is not able to replace a stationary circular saw.

The designers of some DP models decided to help consumers and supplied their products with devices that can somehow compensate for the lack of a table needed to work with large materials. And yet, all design tricks, as a rule, are compromises.

How to make a stationary circular from a manual circular

Of course, there is a way to get rid of the disadvantages of a portable tool - to buy a stationary circular. However, since you have become the owner of a hand-held circular saw, do you plan to work with it? Shouldn't you start by making a do-it-yourself table for a circular saw that will help turn a DP into a full-fledged machine? As a result, you will get experience, satisfaction from the work done and, finally, the desired result.

If you have an old table (dining, kitchen, writing), then it will make a wonderful bed. But it may happen that this is not at hand at the right time, so you will surely need tips on how to make a table with your own hands for your DP.

For the working surface of the future machine, the so-called Finnish plywood is ideal. This material is laminated (good sliding of blanks when sawing), thick enough (can withstand a large mass), moisture resistant (useful quality for outdoor storage) and at the same time not without such wood qualities as ease of processing.

You can use simple plywood 20 mm thick to make a table with your own hands, only it will have to be treated with special compounds and painted. It would be even better to cover the table with a sheet of steel or textolite.

For the manufacture of drawers, any boards at least 40 mm thick are suitable, and the legs can be made from wooden bars, steel corners or profile pipes, but boards 100x50 mm are best suited

You need to be warned before you get started that the finished table for the circular saw will reduce the cutting depth of the circular saw just by the thickness of the cover, but if your DP is equipped with a large diameter disc, then this circumstance will have little effect on the performance of the new machine.

Manufacturing of lids and sides

When making a table with your own hands, keep in mind that the length and width of its working surface must be sufficient so that the workpiece can lie flat on the table top. The accuracy of its processing largely depends on this. You can add that an electric planer and a jigsaw can also be attached to a wide table from below. Then you get a multifunctional machine.

Cut out a rectangular sheet of plywood of the required size and process its edges. On the future inside of the countertop, mark the fastening. You can lean the sole of the circular against the surface and circle it with a pencil, and make a slot in the tabletop with a saw blade. If your DP will be used to cut workpieces at various angles, then the slot should expand towards the top of the table.

You can pick up a few millimeters of thickness from the table in order to try to get closer to the depth of cut provided for by your DP passport. Make a small indentation for the sole with a milling cutter. Of course, do not abuse this opportunity (a depth of 10 mm is enough).

Now it's time to make the side boards (side boards under the tabletop), they will strengthen the structure and ensure the legs are securely fastened. In addition, it will be possible to place fittings on the side to turn the tool on and off. The sides will be located 5-10 cm from the edges of the tabletop. With this in mind, cut 4 boards. Collect them in a box and fasten it with self-tapping screws (2 fasteners on each edge).

Coat the edges that will adhere to the lid and the countertop with carpenter's glue, attach the box to it and fix the sides together with the lid with clamps. Without removing them, screw the screws through the work surface into the sidewalls. Remember that the heads of the fasteners must be flush with the surface of the table, so before screwing in the screws, drill holes and countersink them.

Table legs

Making a do-it-yourself table for DP has not ended. Now you need to attach legs to it. Calculate their height so that it is convenient for you to work in the future. The legs are attached to the drawers from the outside and are pulled together with screws, bolts or threaded studs. The heads of screws and bolts, as well as nuts, must be separated from the wood with washers.

Even if you think that you have securely fastened the legs, they still need to provide additional rigidity, because a slightly different load will act on a table made with your own hands than on a coffee table.

Spacers will have to be welded to the legs from a profile or corner, and bars of 40x40 mm or 50x50 mm are suitable to reinforce the supports from the boards.

Required extras

In order not to miss a single detail when making a table with your own hands, you should be aware of the restrictive or regulating bar. Some models of portable DP have it, but its stroke is not enough to work with wide workpieces.

Table of a circular machine: 1 - plywood jumper; 2 - steel plate; 3 - insert; 4 - saw blade; 5 - screws; 6 - countersunk screws; 7 - bed board.

The length of the bar should match the length of the table. It can move along the guides on both sides of the cover or be fastened with clamps. In the surface of the table, you can make 2 slots perpendicular to the saw blade, through which the restrictive bar will be attached at one or another distance from the blade. The limiter can be made from a bar, a metal corner or a profile pipe.

It remains to make a new switching unit for the new machine. This is a pretty simple job. A ceramic socket is installed on one of the drawers, where the DP will be connected. The saw button is fixed in the on state (do not break it, but make a simple latch from a strip of steel or aluminum, wrap the button with the handle with electrical tape). On the wire going from the socket on the frame to the mains, install any switching device that matches the power consumption of the saw blade. Fix it on the sidewall in a place convenient for you.

It is a convenient and productive tool that is used for construction work. Using this equipment, you have the opportunity to use the qualities of maneuverability, as well as speed. However, when cutting large batches of lumber, it is quite difficult to work with this tool. The table greatly facilitates the task for it can be made without much difficulty.

Execution features

The basis of the design can be plywood or board. In this case, the tool will need to be installed at the bottom of the tabletop, while the toothed disk will need to be located in the hole in the desktop. The element being used for cutting will extend beyond the rectangular hole.

After the saw is turned on, the disc will rotate, and when the material is fed, sawing will begin to occur. The greatest thickness of the processed material will depend on the dimensions of the disk, as well as the power of the tool. When choosing equipment, you need to take into account the thickness of the table top, to which the saw will be attached at the bottom.

Features of the choice of "circular"

If you do not yet have a circular saw available, then it can be purchased, taking into account some characteristics, among which the power of the equipment can be distinguished. If the tool is supposed to be used for household tasks, then a power of 800 watts will be enough to make a table for a circular saw with your own hands. This indicates that the volume of work will be medium.

It is important to pay attention to the depth of cut, the maximum thickness of the processed material will depend on this. Hand saws of semi-professional or professional grade, as a rule, have a cutting depth ranging from 40 to 70 mm.

Work technology

Holes in the surface of the desktop must be drilled through the markup. Marking when you make a table for a circular saw must be done before cutting. The fixation of the ribs to the tabletop is carried out with the help of the elements after the connection must be compressed with clamps. In place, you need to designate the location of the side stiffeners, which then need to be sawn and glued in the same way.

Features of the work

If you decide to make a table for a circular saw with your own hands, you can prepare the drawings yourself. After gluing, the clamps should not be removed immediately; the structure must be additionally fixed with self-tapping screws that are installed in the holes. They need to be prepared from the bottom side so that the fastener caps are recessed into the structure. After the glue has dried, the stiffeners can be removed from the clamps. On this we can assume that the countertop is ready.

A do-it-yourself table for a circular saw should be made using legs, which should be made from a board of 50x100 millimeters. The height of these elements will be determined by the height of the master, as a rule, this parameter is 110 cm. The board must be cut along the axis at a slight angle on one side. Further, the workpiece is applied to the countertop, so that when installing the legs, they are somewhat spaced. The fastening of these elements must be carried out from the outside of the stiffeners, it is recommended to use bolts.

When making a table for a circular saw with your own hands, a photo of which can be viewed in advance, you need to try to increase the stability of the structure in parallel with the fastening of the legs. To do this, you can make a screed, which is made from a bar with a section of 50x50 millimeters. The hand-held circular saw must be installed in the prepared groove on the underside of the work surface. The sole should be fixed on the bolts, and the toothed disc should be installed in the slot. Markings can be applied to the table, which will greatly facilitate the implementation of cutting materials.

The very surface of the table to protect against moisture can be varnished, which is applied in several layers. When a table for a circular saw is made, after applying the first layer, it is imperative to wait for it to dry completely, only then you can proceed to cover the surface with another layer. This approach will eliminate the effect of sliding lumber on the working surface.

Switching the saw on and off

When making a table for a table circular saw with your own hands, you must solve one important issue at the last stage. It consists in the task of turning the saw on and off. If the master has a sufficient amount of experience and knowledge in electrical engineering, then he can shunt the power key, and then move the control buttons to the outer surface of the stiffener, which is located in front. If this scheme turns out to be too complicated for you, then it will be enough to pull the key using a wire. But you can turn the saw on and off using the power cord.

in the form of a trolley

If you want to make the table mobile, then its upper part can be made in the form of a cart. As its side walls, which will be located behind and in front, you can use chipboard, its thickness can be equal to 16 millimeters. The legs of the table will be bars, the cross section of which is 50x50 millimeters. The supports for the wheels of the structure will be represented by boards, the thickness of which is 35 millimeters. In order to increase the quality of the rigidity of the table, the back and front walls must be reinforced with a board whose thickness is 20 millimeters. All parts must be assembled using self-tapping screws and additional PVA glue. The support boards for the wheels must be fixed with metal squares.

To mount the trolley on the support boards, you need to make shallow recesses, the radius of which will be equal to the radius of the wheel. To attach the ladders to the table surface, you need to install two elements in the form of inserts, which must be fixed on a single plate. On this, we can assume that the table for a circular saw is made by hand, and it can be used in tandem with the main tool, which at least once was necessary for every home craftsman who loves to work with wood.

Finally

If you decide to make a table for a circular saw with your own hands (DP 2000) using this technology, then the work process will not be accompanied by unnecessary difficulties. Any home master can handle this, even one who does not have certain skills in doing this kind of work. If you have a desire to significantly expand the functionality of a desktop designed for a circular saw, then you can increase its safety index. You can make the design more complex, it all depends on your skill, and most importantly, the desire to master new horizons of construction work. Good luck and good luck with your new ventures!