Lattices in the arbor do it yourself drawings. Decorative lattice of wood for a gazebo do it yourself: options, photos, video

Just build a gazebo in the yard will not be much difficulty. But it should stand not only for the tick, but also bring aesthetic pleasure, because its main purpose is the opportunity to spend time with close people or to be alone, thinking of depths.

In this case, an indispensable element for the gazebo is a doom. It can be performed in various ways. One of them will be considered in the article.

Why does the cheek need

The manufacture of chatters for the gazebo is difficult to call a nontrivial task. The process requires accuracy and attentiveness. The design of the crate makes it possible to make the structure completed, removing large opening.

At the same time, the lamp provides a higher level of privacy, closing visitors from foreign views of neighbors or passersby. The fabric will not be able to replace the crate, since the latter does not prevent the influx of fresh air.

On a sunny day, the lamp will make more comfort inside the arbor, partially sharpening the area. It is easier to mount the anti-mosquito on the grille, which will be protected from annoying mosquitoes. In addition, such an addition to the gazebo is perfect for curly plants that can freely wear the design.

What to do

Someone prefers the lamp to be made of metal, but such a design is quite cumbersome and selects all the ease of the gazebo. That is why it is easier to make it from wood, in addition, it is precisely such an option to make it yourself. Oak can be used as the basis.

Wood of this plant has high strength, as well as durability. It can be covered with a verse to give a special shade. But for an inexperienced joiner, the oak can represent the problem, since its processing requires special skills.

For strength, the oak is not inferior to the larch. But the wood of this plant is more supplied to the processing, therefore is an excellent option for the crate. Another advantage of precisely such wood is its resistance to moisture.

Due to the high density of the moisture, moisture is not able to penetrate the thickness and cause rotting processes. Another option for the construction of such a design is ash served. To a certain extent, he absorbed all the advantages of two other options and his appearance will delight the owner.

In some locals, it is easy to get a beech wood. Wood highlight is a pinkish shade, which cannot but attract a look. The wood of this plant is well processed, but without finishing will last long. With constant impact of wet air, a great base for the crate will be wood coniferous rocks.

The thickness contains a significant number of resins that have a water-repellent effect. In addition, such wood will fill the room with a pleasant aroma.

Preparatory stage

The task of the preparatory stage is to collect the necessary tools and materials. For quality completion, the task will be needed:

• roulette;
• pencil;
• chisel;
• self-tapping screw or nails;
• glue for wood;
• corolnic;
• antiseptic composition;
• paintwork;
• hacksaw.

First of all, it is necessary to make a measurement of space that will be closed by the crate. The obtained values \u200b\u200bare transferred to a piece of paper. It is advisable to perform a schematic drawing of the arbor so that it is clear how one or another pattern will look at a particular structure. Next, you need to select a method for placing planks on the crate. There are several options, the main of which are:

• diagonal rails;
• straight rails;
• shivron;
• mill.

Visually, these designs from wood can be estimated by the above. The most common is the first option of the crate. Due to the diagonal placement of the slats in places of their intersection, diamond-shaped holes are formed, which give the structures a pleasant appearance. The disadvantage of such an option is a certain difficulty when holding the angle, as well as the impossibility of glazing. In addition, curly plants are cling to such a crate.

The rectangular version of the chatting for the gazebo will be one of the simplest, which can make an inexperienced master. Planks are located at right angles, and the size of the cells is easy to vary the number of items. In some cases, the glazing design is envisaged. This option is perfectly suitable if you wish to grow wild grapes. The third and fourth options will look great on the arbors, which are made according to the sample borrowed from the eastern peoples.

Note! The preparatory stage also includes planing of surfaces, as well as wood impregnation with antiseptic compositions.

Preparation of Rama

Any construction begins with a foundation or foundation. Such a basis for the crate serves as a frame of wood. Previously, according to the sizes in the drawings, it is necessary to prepare bars for the crate, simply cutting them up to the desired size. The connection is made by a thickening method. For its manufacture, it will take the chisel, hacksaw and a pencil with a tape measure. In two timber bars, the groove is made. Its depth should be equal to the width of the bar. In the other two from two ends, a protrusion is made or spike, which should be tight in the prepared groove. Additionally, a hole in the wood is drilled in which the wanking is inserted. His task is to strengthen the entire design.

Before assembly, all interactive parts made of wood are labeled with carpentry glue. Next, a square will be required, which will help withstand straight corners from a wooden frame for the crate. Instead of a sewage, you can use wood screws or nails. In the first case, it is better to pre-drill holes with a smaller diameter than the self-tapping screw, and only then screw them down. This will prevent the appearance of cracks in the wood frame.

Tip! Instead of a thickening frame for the crate, you can go easier. In this case, each end of the frame elements is cut at an angle of 45 degrees. Help in this will help the stub. After that, you can connect the elements with nails and glue. If the realization is planned with a diagonal arrangement of slats, then you will need a double number of frames, since the labels themselves are placed between them. At the same time, the size of pair frames must be identical.

Assembly process

For simplicity of assembling a diagonal drawing of the crate, you can make two templates, as shown in the photo above. They are small cropping planks of the same size. The first frame is located on a flat surface and is fixed to it with clamps. The ends of the frames for the frame may not necessarily be immediately cropped under an angle of 45 degrees. It will be easier if they are when assembling will perform a little outside the frame of the crate.

The first element is set using the tool that 45 degrees can be postponed. All subsequent are placed through trained patterns. Rakes are nailed to the frame with small cloves. Additionally, they can be sampled to make a lamp to have greater durability. The protruding parts are cut into the frame perimeter, which will automatically make ends at 45 degrees. The finished design is covered with several layers of varnish. After that, you can fix the second frame to the crate.

Each element of the crates is manufactured according to the above algorithm. When assembling, it is necessary to correctly select the length of the nails. They should not be outside the frame of the crate after clogging. If this happened, then the tip must be eliminated by nippers, and the breakdown's place to smell the olifa so that it does not become a focus of development of rotting processes. By readiness, all the modules of the crates are installed in their place and recorded by self-drawers or nails. Installation process can be found in the video below.

Summary

As you can see, the lamp is an excellent supplement for the arbor. There is a variant of the crate who is manufactured with a dress. In this case, in places of intersection of slats, the crates are made half of the thickness of the plank. This allows them to be connected in such a way that the design is monolithic. Most often, the elements are sitting on glue, since nails will look inaccurately. During the manufacture and assembly of the modules, it is necessary to use personal protective equipment in the form of gloves and glasses.

The desire to give a wooden gazebo Attractive form is quite justified. Achieve the set task will help the installation of the lattice, which can be done on their own. The decorative grating for a gazebo serves as an excellent basis for curly plants. How to make a different way to make a practical element of the construction with your own hands, we will tell you in detail.

Spike connection

Before you directly proceed to the process of creating a wooden lattice, you should take care of the presence of all necessary primary instruments and materials, so that in the future it is not distracted by trifles in search of a particular item.

Preparatory stage

To work on the design of a wooden gazebo, a sympathetic grid will need:

• bars for assembling frame;
• planks for the crate;
• grinder machine;
• wood hacksaw;
• fasteners (nails, selflessness, carpentry adhesive);
• materials for finishing wood grid (varnish or paint designed for external work).

Comment! The start of work is preceded by drawing up the drawing, which reflects the form of the decorative element of the arbor, size and design. Check in the process of work with sketches is convenient, having a sketch of small sizes at hand.

Frame manufacturing

The basis of the wooden lattice is a frame, its assembly is engaged in the first place. Made frame from a bar of 20x45 mm. The material is collected taking into account the size of the arbor specified in the drawing. The scheme below offers several options for connecting wooden parts. The ends of the bars are cut off with a hacksaw, after which the elements of the frame under the grille are bonded with nails. In the same way, the second frame is collected.

Okeekhet

Wooden grille for the arbor is going pretty simple:

• For crate on the frame, it is necessary to prepare Falts (rectification of a rectangular form).
• Planks with a cross section of 10x20 mm are fixed along the edges of nails. Previously, on the long sides of the wooden frame, the places of fasteners are marked.
• After connecting the edge of the plane spils at an angle of 45 o.
• It remains to collect the grille for the arbor. Planks of the crate on the frames should be placed relative to each other at a right angle. Frames are connected to each other by self-draws.

Naturally, both frames must be absolutely identical. This is the easiest way to decorate the arbor with a grid, made with your own hands. Extend the service life of wooden elements will help their protection with varnish or paint. The compositions are applied in several layers, reducing the consumption of materials is capable of pre-treatment of the wooden surface of the oil surface.

Tip! If the arbor decorative elements is fully planned, there can be a mosquito net between two frames. This will create a reliable barrier from annoying insects. In the evening, the entrance is additionally treated with insecticides.

Examples of attractive wooden buildings and carved arbors on the photo further:

The second way of registration of a wooden arbor grille

Not everyone is able to arrange a thickening connection and folds. The most simple way to make a lattice, suitable beginners:

Further algorithm of actions is similar to the process of a thorough compound.

Option "In Putoy"

Another option to create a lattice is more time-consuming and requires certain skills to work with the tree. This method implies the drowning of the rivers one to another, and not the imposition of elements on each other, as in the previous case.

Algorithm of actions:

• Reiki are marked with the planned lattice design. Will there be a rhombus or square after crossing individual elements.
• On each wooden slap according to the markup, it is cut by manually or using a milling machine the groove, the depth of which corresponds to half the rack thickness. The width of the propyl corresponds to the size of the inserted part.
• Gradually, one bar is inserted into the other. This allows you to form a solid canvase effect with cut-out geometric shapes. The grating for a gazebo is very refined.

Comment! If the design of the gazebo needs to install durable and reliable lattices, the bar and rails are selected by a large cross section.

Such a connection of the planks can be framed by two frames or one. In the second case, the frame is preparing the deepening under the plank of the appropriate size (oriented on the thickness of wooden plates). The elements are fixed in the holes with a joinery of the adhesive or self-drawing. The advantages of the method - the grateful grate and the lack of the need to form the second frame. Minus - Additional work on the preparation of recesses on the only framing.

Installation on the gazebo

When all grilles are ready, it is necessary to install wooden elements on the arbor. The installation process begins with the alignment of the decorative product relative to the bearing pillars of the arbor. It is useful in this case a hammer.

The sides are bubble until the edges of the wooden decor are equal to the outside of the vertical supports. When the grille is completely aligned, proceed to fixation. Side bars need to be fixed on carrier supports with self-draws. The aesthetics of the attachment is ensured when the fasteners are cutting into the wood. Fully disguise the elements of the attachment helps the processing of sections with putty.

Decoration of lattice and gazebo

Options for design arbor set. Traditionally, curly plants are planted with a lattice around the wooden building. The girl's grapes, plethyous rose or actinide are popular with popularity. The grille can be covered with bright paint.

Speeciously look at the arbor, where in addition to classic rectangular grids, decorative elements of a complex configuration are installed. Arched entrance is the most popular approach in design.

Everyone seeks to make an attractive arbor. Excellent decoration in this case serves grill for gazebo. Wooden grille for the arbor is pretty simple. This will be discussed in this article.

The decorative grating for a gazebo serves not only as a beautiful decoration, and may also be the basis for curly plants.

Materials

Make decorative wooden grids for a gazebo can be quite economical way. All materials are most likely you have. Even if there is no something, you can easily buy it in a garden shop at a cheap price. After determining the necessary materials, it will remain only to figure out how to make a grid for a gazebo.
For the manufacture you will need:

1. Bars;
2. Hacksaw
3. Selfless
4. Nails
5. Planks
6. Sander
7. Carbon black
8. Wood paint or varnish

Small council. Before starting to make a grid, decide on the size of the frame, design and shape of the lattice. It is best to make a small drawing with which you will be checked during the work.

Method number 1: Spike connection

We make the framework

In order to make a wooden grid, you need to make it frame. The timing is perfect for a cross section of twenty-forty-five mm. Bruks cut by the parameters of the arbor section, which we will close the grille. Then we connect them one of the options for connecting the plane frames of the main frame (in the photo below)


Looking at the picture, cut off the ends of the bars with the help of a hacksaw. After that, we knock them together with nails. According to the similarity, we make the second frame.

Okeekhet

The cuttack for the gazebo is made simply. We already have almost ready-made frames, it remains to make a fold (sample on the edge of the board in the form of a rectangle). We need 4 wooden frames 10 by 20 mm for each frame (total 8). These planks fasten with nails at the edges of the frames of the frame.

We make marking on the long sides of the frame in the place where the lattice bar will be. Spil up the ends of the planks at an angle of forty-five degrees.

Now it remains only to collect the grille. Moving the resulting half in such a way that the frames of the frames crossed and scrape them with the help of self-sufficiency.

The frames must necessarily be absolutely the same, only so you get a qualitative result.

We looked at the first way to create a wooden lattice. This method is the easiest and most popular. Also, decorative lattices are manufactured in other ways. Consider them further.

Method number 2. If there are no tools for a thickening connection

Algorithm for creating clamps

On the ends of wooden bars make small samples. Then we docile them and firmly connect the joinery glue. Also reinforce the angles using self-tapping screws (to move into each angle one self-tapping screw).
We make two identical wooden frames. Then we attach the rails to the side of each bar. Now you have a fold.

Filling

Now, in order for a high-quality wooden lattice for a gazebo with your own hands, you need to fill it. To do this, you need to make the same rails that are used in the fold. Reiki are located diagonally at an equal distance from each other.

Assembly

We will proceed to assembling the lattice. Mix two frames so that the rails crossed out, and scrape them with the help of self-tapping screws. At the same time, the frames can be slightly stigled for better docking.

It is also worth placing a mesh mesh between the frames. This will help you to avoid huge insect accumulations in the gazebo and reliably protect from bites.

Treatment of lattices

To give a tree of a better species, as well as for a larger service life, it should be treated with paint or varnish. Usually varnish are applied in several layers. It is better to handle the grille assembly.
Here is one example of how to make a finished grating for a gazebo.

But the variant of the finished lattice on the gazebo.

Method number 3: "In Putoy"

When using this method, you need to not apply the rails to each other, but to drag one to another. To do this, it is necessary on each element to promote or cut the grooves in half the rack thickness to depth and with a width equal to the width of the rail. Next, insert one bar to another. This will create the effect of a whole web with which the rhombus or squares are cut. Such a product will look more unique and openwork.

If you need to make more durable and massive wooden lattices for the arbor do it yourself, then you should take a ray and a bar of a larger thickness. You can make a grid, as indicated above or apply a different method. It consists in the manufacture of one frame, not two. In this frame, the excavations under the planks of the required size, equal to the thickness of the parts, are sized. Next, you need to secure the planks in the holes with screws or glue.

Plus this method is that you do not have to make the second frame. Yes, and look such a lattice is much more unique.

Installing lattice

In all cases, you will need to install the lattice at the very end to the place prepared for it. When installing, it is necessary to align the product relative to the bearing walls using the hammer. It is necessary to knock down until the edges are equal to the front side of the vertical columns. After you align the lattice, you can start fastening the product. You need to attach lateral bars to the beams with the help of self-tapping screws. The fasteners should be drowning inside the wood, and then smear with putty.

Lattice decoration

To give a wooden lattice more presentable type, you can use various scenery. Blizzard plant will perfectly fit into the interior of the country area, but do not forget that behind such a plant also needs care. It is necessary to periodically cut the plant by the secateur, as well as about once a week, water the necessary amount of water. Such plants include plenty rose, maiden grapes, actinidia and others.

You can also paint the grille in the color that will be combined with the color of the plant. It will give a special contrast and the style of your gazebo.

Add originality

Now let's look at a more complex version of how wooden lattices are made for the arbor do it yourself. The main difference of more complex structures is in their drawing. For example, rhombus can be double or triple. Also, the lattices are combined with different figured and carved elements.

You can create almost any shape of the lattice, harmoniously decorating it with your taste. The photo presents various lattice design options.

You can go even further and make a grid of cut branches of trees. Such a lattice certainly will not leave anyone indifferent, will attract universal attention. Start the manufacture should be with a frame of thick branches. These branches must be combined with self-draws. Then the space inside the frame must be filled with thinner branches, having them as your soul. Attach the branches to the frame, both with the help of tight wire and with the help of self-tapping screws.

Lattice shape for gazebo

The most common shape of the lattice is a square or a rectangle. And it is quite logical and convenient. But if you want to give a gazebo unique view, you can perform the top of the lattice is broken or deployed. Rack cornice looks great in the form of the arch. You can choose any other form, it all depends exclusively from your imagination.

Wooden grille for the arbor will significantly save your tools and perfectly fit into the interior of the country area. In addition, as we found out, it is not difficult to make it. With wooden lattices, you will make your site unusual and stylish. This will significantly improve the appearance of the garden and show you a true gardener.

Want to build a garden gazebo or summer terrace with openwork lattice walls? In this article I will tell you how to make wood grids for giving using inexpensive and affordable materials.

Features of self-making wooden lattices

Lattices in the finished form can be found on sale in many large garden supermarkets, while most of them have two significant drawbacks:

• Price They may be unreasonably high;
• Range Usually limited to a small variety of sizes.

In order for each owner of the country area to independently make wooden lattices of the necessary sizes and shapes, this article published an instruction in which the main features of the performance of such works are described in detail.

Functional purpose and scope of application

The decorative protective grill for the cottage from wooden rivers is a light, but at the same time a solid and sufficiently rigid design. It can be used as a fence in the manufacture of garden small architectural forms, local separation of the territory, or performing other similar work on the site.

1. Such lattices are well suited for use as side walls. For a gazebo or for the terrace. Thanks to the breathable design, they provide a shadow in the country and at the same time do not prevent the free circulation of fresh air. Or you can read the terrace on our website.

1. Low resistance The movement of air flow allows them to confront wind load well, so they can be operated on the street without dismantling at any time of the year.
2. Wooden lattice frame It is good to use as the basis for curly plants, as well as a grape vine or other garden-garden fruit and ornamental crops.
3. Decorative hedge From wooden lattice modules can also be used to distinguish between your site into separate areas, for example, to separate the recreation area from the parking lot or household territory.

Note!

In summer garden gazebos, so-called pergolas, lightweight wooden lattice designs can also be used as a ceiling overlap designed to protect against sunlight. If you do not know how to make a shadow in the country, then this option is just for you.

Selection and preparation of material

For independent manufacture of decorative lattice structures, wooden bars with a cross section of 40x20 mm are best suitable, and rails with a cross section of 20x10 mm are best, but in the case of their absence, any lumber and cutting of wooden rises of suitable size can be used.

Considering that any wood grid is designed for street exploitation, it should be paid to the right choice of wood for their manufacture.

1. Duba wood It has high operational and aesthetic qualities, but it is quite expensive and difficult to mechanically process.
2. Beech It has no less durable and beautiful wood structure, but this material is not always and not everywhere on sale.

1. Wood ash High strength is different, and best of all resist the effects of atmospheric factors of the larch wood, which is practically not destroyed, even during operation in conditions of high humidity.
2. Pine It is considered the most optimal option for the manufacture of similar products. Pine wood is the most inexpensive and affordable, easily mechanically processing, besides, it is absolutely saturated with natural resin.

Note!

In order for the finished product over time, it is recommended to be made of dry wood, the humidity of which is not more than 10-15%, is recommended to perform independent manufacture of decorative lattices.

Assembly and installation of structural elements

Depending on its purpose and personal preferences of the owners of housing, a decorative-protective carved grille from a tree or MDF can be manufactured in various sketches, but there is a classic scheme according to which any home master will be able to assemble a similar product in a short time with a set of household carpentry tools.

1. Preparation of materials. First of all, the 40x20 bar need to collect two identical rectangular or square frames, the external dimensions of which must correspond to the overall dimensions of the future lattice.
2. Assembling frames. The connection of two adjacent bars of the frame should be performed at a right angle using joinery glue, wooden spikes, aging or overhead metal corners.

1. Set of rails. On the one hand, each frame with small nails or small screws diagonally fasten the crate from the decks with a cross section 20x10 mm, strictly withstanding the angle and the distance between them with the help of a pre-made conductor.
2. Docking frames. As a result, two identical frames with a diagonal crate should be turned out. They must be folded with each other with thin rails inward so that they intersect with each other will increase, after which it is born using joinery of joinery or self-tapping.
3. Installation. The resulting design must be installed in a predetermined opening, and in the case of a separate installation, its end is recommended to climb thin boards or plywood.

Wooden lattices are indispensable when we need to build the structure of the structure with light and elegant elements of structures. It may be a wall of a semi-open arbor, or a porch element. And make them yourself - not too difficult. And besides, not quite expensive.

Any lattice is a frame that gives the structural strength and a certain rigidity, and filling from the intersecting elements. The first technological operation will be the manufacture of the frame. It is advisable to use bars with a cross section of 20x45 mm. You can connect bars on the frame either a thickened connection or connecting the angles "on the Us" and using a plug-in rail.

Suppose you cannot connect a spike connection, because you have only hacksaw from the joinery tools. We do at the ends of the sample bars. Then we connect the parts and fix with the help of glue. You can even connect nails. Almost bite your caps. So that they do not spoil the appearance of the design. For reliability, screw into every corner of the frame on the solemn. For one lattice, two frames are needed. They must be the same. Prepare parts for them should simultaneously use the bars of one frame as templates for the details of the other.

On the sides of the bars constituting the frames, rails are stuffed, a cross section of 10x20 mm. Thus, we have a fold. If the rails should be installed so that the joints of the bars are blocked by the ridges, this design will serve as an additional fastening for bars. In this case, the need will disappear in self-drawing for corners of the frames.

Now you can start filling. For him, they will need racks of the same section as for the fold. Reiki are located diagonally, through arbitrary, but equal distances. So that the work turned out to be neat, the location of the plates on both frames should be identical.

In case if wooden grilles for gazebo Will be installed in the opening, closed from all four sides, as an element of a wall panel, for example, or as a design that replaces or supplementing the window, the fold on the edge of the frames will not need. This option will be much easier. They can be fill on the frame with some allowances. And then simply cut down an excess along the contour of bars.

Now you can collect the lattice. It is necessary to fold the half of the frame so that the rack fills will crossed out. If necessary, the frame must be submitted for better docking them. It remains to be made up the design by four self-testers. But it is better to do later.

Next technological operation - surface treatment with decorative protective compositions. It is advisable to perform to the assembly - each half separately. First, it is much more convenient. And secondly, so you definitely will not remain raw places in the places of crossing of the rail, you can apply on all surfaces two - three layers of varnish. You can also choose any suitable version of the veil. Its selection depends on the appointment of the lattice.

A storm grille is installed in the wall panels of the gazebos, it can be paved between her half a mosquito net. By this you protect the arbor from mosquitoes.

Such a grid can be installed on the bottom of the arbor, as an element of the basement. In addition to looking like such a structure will be very elevated, the lattice will serve as a protective screen that hinders in the underground space of rodents and insects, but not imperative air circulation. In this case, there is a grid between the frames, which can be changed as needed. This option of wooden lattices to disassemble and collect again in a matter of minutes.

You can make a more massive heat grid from the sewn slats without using the double frame option. This design can be used as an open arbor wall. Then it will be attached directly to the frame. Or serve as an integral part. For the lattice, the slats are suitable with a cross section of 20x40 mm. They will be used as a frame, and as filling. First, all the elements of the grille are prepared: they must be well polished.

The imposition of horizontal bars on the vertical is going to a rectangular frame. The sections of the imposition are fixed at a right angle using clamps. Then glued with waterproof glue. The planks of the future lattice are roaming at an angle of 45 degrees. We collect the outstand of a diamond lattice.

To observe the exact distance between the planks, it is convenient to use a wooden pattern. Planks are attached to the horizontal brushes of the jack flush. Now you need to flip the design on the front side and collect the second side of the grid, as well as fixing the planks of the online flush to vertical bars. All places of intersections of the planks are additionally strengthened with self-draws. It remains only to make a decorative protective coating on a wooden heat grid.