How to make a pig out of a plastic bottle. We make piglets from plastic bottles for the garden

A cute pink piglet from a plastic bottle will decorate your garden or yard, and on the eve it will take pride of place on a brightly decorated Christmas tree.

And since making a pig from a plastic bottle will not be difficult even for a child, it will be possible to take part in a traditional winter competition of Christmas tree decorations with him.

Having shown imagination, you can turn a pig into a fashionable pig or into an elegant stylish boar. Everything will depend on what details will be used to create the image.

So how to make a pig out of a plastic bottle?

To start, you need to arm yourself:

• scissors
• tassel
• black marker
• white and pink acrylic paint (you can take a spray bottle)
• white and pink cardboard

Pink paint covers the entire surface of the bottle.

Leave the bottle to dry, meanwhile, draw on the cardboard ears with a long base, which will help us attach them to the bottle base.

Carefully cut out the ears.

And insert them into the narrow slots in the bottle. Making such cuts is easiest with a sharp clerical or even a regular table knife.

From white cardboard or foamiran we cut out cute oval eyes, draw pupils on them with a black marker.

Glue the eyes to the bottle. Glue two black circles on the cork - we get a patch.

Now we cut out four rectangles from pink cardboard, twist them into tubes, fix with a stapler.

We get four legs for the pig.

One caveat: a piglet who will live in the garden, it is better to make the legs not of cardboard, but of bottle caps. The same applies to the ears and the eye - it is better to cut them out of bottle plastic, and cover the finished figure with decorative varnish to protect the paint from moisture. You can use special paints designed for exterior decoration.

Done! DIY pig made! If in the future it is planned to use it as, you can immediately attach a loop of wire or a strong thread to the back. If the pig will decorate the house or garden, you can leave it in this form.

You can make a pig out of a bottle, using a slightly different technique. In this embodiment, the plastic bottle is not painted, but wrapped in pink paper.

We bring to your attention an article in which we will tell. Each in the house there are several plastic bottles. Most of them are simply thrown away or used for domestic purposes. But few people know that they can be applied more unusual. Products made from plastic bottles will be a great addition to decorating the garden or will entertain the kids in the playground. The following is one of the options for making pigs from a plastic bottle. Its production does not take a lot of time, and the result will look very unusual and beautiful. They can decorate the lawn, and then get a unique flowerbed for vegetation.

What you need to create piglets from plastic bottles

To complete it is necessary to prepare:

1. 5-6 liter plastic bottle
2. A plastic bottle with a volume of one liter and a half, if not, then it is possible and two liters.
3. 4 plastic boxes or 500 ml plastic bottles
4. Black marker
5. Scissors
6. Paper knife
7. Clay "Moment"

Step-by-step execution:

1. We take a bottle of 6 liters and remove stickers and everything else from it. We take a marker and mark a hole for a flower bed. A marker for CD-ROMs is perfect for this. We cut it out with ordinary scissors, but it is important to first make an incision with a paper knife to make work easier. Pre-harvesting completed.
2. We proceed to cutting the remaining parts. On the body of a two-liter bottle, draw an eye, then mark about a centimeter for fixation. Carefully cut out. Then we take and circle the eye so that the second turns out the same size. Cut out. Next, we cut the tail, cut the strip with scissors. To make the tail more natural, you need to twist it, take an ordinary elastic for hair, roll it into a ring and fasten it with an elastic band.
3. For painting animals, it is best to take paint for street work. Paint the small parts separately, and the legs on the piglet itself. When everything is painted, wait a while until the parts are dry.
4. It is not necessary to make the legs of a pig, you can use wooden supports for this. If the paws are necessary, then mark their location in advance. We glue the paws using glue “Moment” and wait for complete drying. To complete the legs, you can use the neck of a half-liter bottles.
5. As soon as the pig’s legs are stuck, put it on and mark the places where the ears will be located. To do this, you need to attach them vertically and draw a line for the cut. Carefully make a slot and insert the ear into it. The plastic should hold the eye perfectly, therefore, additional fixation is not necessary. We also fix the tail on the back of the back.
6. Next, the most crucial moment lies ahead - this is painting parts. It is good if a spray can or spray gun is available. If not, use a simple brush. First, it’s better to paint the bottom of the legs, and only then move on to the top. At the same time, it is very convenient to hold the piglet by the nose, so do not screw the piglet in advance. Now it remains to wait until the product dries. Ideally, if you do not touch it for about 8-10 hours.
7. Once the set time has passed, you can begin to decorate the pig. We fix the patch, and then with the help of the marker we draw the nostrils. Eyes can either be drawn or glued in advance purchased, they can be purchased at any needlework store. Draw the cilia and the mouth and you're done. You can continue to decorate products at your discretion. Add a bow to the ponytail or glue a few artificial flowers.
8. Next, we make a functional object for a garden plot out of a cool little animal. A small number of holes pierce the bottom of the pig. It is easier to do this if you heat a screwdriver or other metal object over a fire. Then we pour drainage, and on the upper part we begin to plant vegetation. Piglet for the garden is ready.

For those who try and make a few more piglets from plastic bottles, the lawn will turn out to be very picturesque and funny. Products can be painted in different colors, so they will become even more interesting. That's all it takes for making a pig from a plastic bottle. Read our website

Plastic bottles are an invention of civilization. The invention is convenient, but at the same time, these bottles accumulate a lot and quickly. Craftsmen have learned to make various interesting things out of them, useful and beautiful. For example, five- and six-liter bottles won primacy as material for garden decor. Of these, they create real masterpieces, even build arbors and utility rooms, as well as various animals that will decorate any site. So this workshop will tell you how to turn an unnecessary six-liter bottle into a pretty pig.

In addition, our pig will not only be an ornament, but also a mini-flower bed or flower pot.

To make a pig you need:

- a five- or six-liter plastic bottle;
  - liter, one and a half or two liter plastic bottle;
  - 4 plastic boxes or half liter plastic bottles;
  - paint for street work;
  - black marker;
  - scissors;
  - a paper knife;
  - Moment glue or any similar.

So, we begin work.
  1. Take a six-liter bottle, get rid of the stickers and holder.

Now - cut it out. Plastic is perfectly cut with scissors, but first make an incision with a paper knife - this will simplify the work. Here is the blank for the mumps.

2. The next stage - we cut out additional details. On the body of a two-liter bottle we draw an ear, then we mark somewhere a centimeter for fixing.

Cut it out. Then - draw a marker around the finished ear on the bottle, so that the second turns out the same. We cut it out.

Ears are ready. Cut a strip - it will be a tail. So that it looks twisted, we turn it into a ring and fix it with an elastic band, and leave it for a while.

3. You can paint the ears, tail and patch separately, but you can on the product itself. Based on experience, it is better to paint small parts separately, but the paws on the product. If your pig will "live" on the street, then it is better to use paint for street work. I used the enamel that painted the swing on the playground. Small details are painted. Leave them to dry.

4. In principle, the legs of the mumps can not be done, and put it on the flower bed on wooden supports. If you decide to attach a pig hoof, then first outline the place where they will be located.

In this case, I used instead of legs - unnecessary jars of gouache paints. Glue them to the “Moment” glue, press, leave to dry.

The legs can also be made from the necks of half-liter plastic bottles by simply cutting them off with a margin, and somewhere around a centimeter - cut into fringe so that it sticks better. Still suitable tall plastic covers, like from a fabric softener or liquid detergent.

5. When the legs are stuck - put a pig on them and mark the places where the ears will be. To do this, apply the ear vertically and draw a cut line.

We cut carefully, insert the ear into the slot. The plastic will hold the workpiece tightly, so additional fixing is not required.

In the same way we attach a tail on the back of the pig.

6. One of the most critical stages is painting. If you have a spray can or paint sprayer - use it. If not, the plastic is well painted with a regular brush. It is better to paint the bottom and legs first, and then the upper part. It is very convenient to hold the pig by the nose, so it’s better not to screw the piglet ahead of time. Now the pink pig is ready to go dry.

7. When our pig has dried - it's time to start the decor. We screw the “piglet”, and then with the marker we draw nostrils on it. Eyes can also be drawn, or you can stick ready-made ones, which are sold at any needlework store. We finish cilia and mouth - our piglet is ready.

Of course, at this stage, the decor can not be stopped, for example, you can attach a funny bow to a pig, draw rosy cheeks for it, and spots or flowers on its sides. Here you can give free rein to imagination.

7. Now turn a fun toy into a functional piece of garden decor. At the bottom - we pierce several holes. It is very convenient to do this with a screwdriver heated by a fire or another hot metal object. Now we put drainage on the bottom, on top of the ground - and plant the plants. Pig bed is ready.

The final form of crafts. Photo 1.

The final form of crafts. Photo 2.

The final form of crafts. Photo 3.

While she lives on the balcony, and eventually - will move to permanent residence in the country.

We hope that the master class will help you easily get such a nice resident on your site.

After all, we all are well aware that the best way to educate and develop a child occurs in a playful way. Educational toys help us in the formation of thinking, the development of speech, fine motor skills, etc.
Toys very well develop hand motility, coordination of movements, etc. Today we will make a cute pig out of a plastic bottle, the author of this work is Irina. Irina sheathed a plastic bottle with pink fabric, made ears, legs and a tail. Piglet also painted pink and drew two dots. Such a pig will surely appeal to your children and they will be happy to play with it. Take the beans and let the baby feed the pig.

Another pig from a plastic bottle:

To make a piglet you will need:
* A plastic bottle, as round as possible, 1 liter.
* 5 one-color caps from plastic bottles.
* Pink foamiran.
* 2 buttons (for making eyes.
* A piece of tape or tape.
* Thermogun.

A method of manufacturing a pig:
We take a plastic bottle and pink foamiran, the bottle must first be washed and dried. We wrap the bottle with foamiran and glue it with a thermal gun or “Moment”. If you stick it with a thermal gun, then make sure that the plastic does not deform from hot glue. It is best if the glue is not very hot. Cut out the ears of pink foamiran, you can use this template.

Glue them to the right place. This is how it should turn out.

We make a tail, cut a strip of pink foamiran and twist it in half. Glue in the right place.

We take the same four caps from plastic bottles and glue them to the abdomen of the pig. This is our legs.

It remains to make the eyes and nose. We take ready-made eyes or identical buttons and glue them on the head of the piglet. Wrap the nose with red tape or tape. Firstly, this is necessary in order to clearly see the target ("where to feed"), and secondly, to tighten the thread - so that when the nose-mouth was closed with a patch, it was difficult to unscrew it yourself and get to the contents without adult supervision.

Everything, a piglet from plastic bottles is ready, your child can already feed him.

Do not leave children playing under 3 years old without adult supervision, especially during games with small objects! We thank the author for the work and interesting material.

In conclusion, I want to show you the video master classes on making a pig from a plastic bottle.

SIMPLE PRODUCTS OWN HANDS - PIGS FROM PLASTIC BOTTLES

Empty plastic bottles do not have to be thrown away . They can find worthy application. For example, make all kinds of plastic bottle products.

And a little lower you will find information (a master class with a photo) on how to quickly and easily make a beautiful pig from this popular material for making various DIY crafts . Plastic pigs can perfectly fit into the landscape design of your garden or kitchen garden, as well as decorate flower beds.

For the manufacture of pigs and other crafts, you will need only your imagination unlimited by anything and the required number of plastic bottles which is always available at home, as well as some tools and materials.

Plastic bottles of different sizes and shapes can be used both in everyday life and in nature.   Here are some ways to use them:

of   large size plastic bottles can   make a wonderful palm tree for your garden ;
table lamp or candlestick;
heat-insulating wall, greenhouse, house;
capacity for liquids and cereals;
plastic scoop for bulk materials and products;
if you cut off part of the bottle, it can become a mug, plate, food container, vase, or serve as a universal container;
raft from a huge number of bottles;

life jacket or lap;
shout, if you cut the bottom of the plastic bottle and glue the handle;
hot water bottle;
watering or splashing if holes are made in the bottle. Such a spray is very convenient for use in nature, when grilled kebab on the grill;
beanbag,   if you put pebbles in a small plastic bottle . It can be hung on a rope stretched along the perimeter in a protected area;
electrical insulator;
trap for crayfish, small fish and rodents;
the bottle made of plastic can be used if there is a need to spend the night on cold soil;
pillow;
incredible use - in it you can boil water at the stake;
plastic footwear for protecting feet from large containers;
a pot for seedlings or flowers, if you cut the neck;
fishing net float;
purification and disinfection of water in plastic bottles;
translucent windows;
as a target that does not leave fragments - for shooting with arrows, stones and other means of destruction;
small dumbbells, if the bottles are filled with small nuts, bolts or wet sand;
rolling pin for dough, if you pour water in a bottle;
wash-hand basin in country or camping conditions;
plastic safety glasses or face mask from insects, flying particles and dust;
thermos - insert plastic bottles of different capacities into one another, and lay matter, newspapers or polystyrene between them;
small greenhouses for rooting various plants, as well as to maintain good humidity of seedlings;
a container for storing matches, which is waterproof, as well as for the transfer of dry fuel;
feeder for animals and birds;
watering can, if you cut the bottom of a plastic bottle;
oiler if you insert a small tube into the bottle cap. She will become an assistant to deal with refueling containers that are in hard-to-reach places, for example, transmission elements or gearboxes;
homemade silencer for weapons;
numerous   toys and crafts for children   different ages.

Be sure to remember that when creating all kinds of compositions from plastic bottles , it is necessary to melt all sections and edges. Use such a good property of plastic that, when heated, can become susceptible to deformation. Thus, you can make beautiful flowers of different shapes.

Nowadays they are very popular in personal plots. piglets from plastic bottles, which can be done quite quickly and simply, as well as plastic flowers of different sizes and shapes for the garden.

Master class with practical photos of making a piglet for a garden from a used plastic bottle in the form of a decorative flowerbed:

take a five-liter bottle from under ordinary water;
cut carefully an oval or square with scissors at your discretion. The body of the future pig will be the resulting bottle with a hole, and we will make future ears from the square;
first draw and cut out an ear pattern from paper. You can choose any shape of the ear at your discretion;
now it is necessary to cut out two ears from which the decorative flowerbed-piglet itself, that is, from plastic, will be made;
then carefully, so as not to cut yourself, make cuts with a knife in places where, in your opinion, the ears should be located;
try on first, and then insert the cut out ears of piglets from plastic bottles;
in case of painting the ears with a spray can be left in place. If you paint the craft of your piglet from a plastic bottle with a brush, then the body and ears are covered with paint separately, and then after drying, the ears are inserted at your chosen place in the body;
you can paint immediately with pink paint, but a completely suitable option for mixing white and red paint is also possible;
after painting the piglet, allow the paint to dry thoroughly;
now draw a piglet and the eyes of your pig, and you can also portray flirty brushes on the ears;
at the final stage, inside the body you need to fill the ground, and then plant beautiful flowers.
Decorative   mini flower bed from a plastic bottle   ready. Even at first glance it’s not possible to understand what such beauty can be made of. For complete authenticity, you can even attach a pig paw.

Another master class with detailed photos on making a plastic pig-flowerbed:

for the manufacture you will need one one and a half liter bottle and one five-liter bottle, small and large scissors, white enamel used for plastic, table and office knives, a brush, marker, glue, a ruler and pieces of self-adhesive vinyl tape-oracal;
pre-cut paper stencils of the drawn parts of the piglet - tail, ears and eyes;
cut off the handle of a large plastic bottle and cut a 12 by 15 centimeter rectangle from the side;
for the ears of the piglet, cut off the center of the brown plastic bottle. Make sure that they have a characteristic bend for the ears. This will not prevent the plastic pig from looking more natural;
paper stencils are now used to make tail, eyes and ears. The central part of the brown plastic bottle will go in two ears, and the tail should be cut from the rest in a circle. Eyes are obtained from three layers of oracal tape - black, white and green with small triangles cut out;
a marker is useful to mark lines for holes;
heat the knife and make two holes for the ears and one for the tail;
make small cuts in the lower parts of the tail and ears, and bend them like antennae;
insert the tail and ears into the holes made in this way. Antennae now bend from the inside;
paint the prepared blank in two layers in pink. Let each layer dry thoroughly;
remove the protective film from the finished eyes and glue from the nose at the same distance;
cut out small circles from the oracal and draw a patch.
Piglet for use in the garden is ready. You can put such a decorative flower bed at home, on the balcony. If such a pig will serve as a planter in the garden, it is necessary to fill the bottom 1/4 with expanded clay to absorb excess moisture. Now add fertile land and plant your favorite flowers in it.

FROG FROM PLASTIC BOTTLES (MASTER CLASS WITH PHOTO)

Used plastic bottles can solve many problems . From them you can make very interesting and varied crafts. The very creative process of making products from plastic bottles can bring a huge amount of positive emotions to the author. Especially,plastic bottles   and you don’t have to search much. They are found in every house in sufficient quantities. Given that they can be of various capacities, shapes and colors, all kinds of crafts can be made from them.

DIY plastic bottles   it’s easy enough to make decorations for the interior of a personal plot and garden, beautiful flowers, interesting toys, various animals, various appliances, furniture.

Plastic bottlesthey are an excellent source material, and most importantly affordable, for unlimited imagination to create all kinds of crafts of any complexity, for every taste and any direction. With certain skills that are recommended to be obtained with the help of a master class, plastic bottles can be turned into a malleable material and feel like real sculptors and creative people.

Plastic is perfectly cut, dyed and stitched. It is quite durable, and with it your crafts will please your eye for a long time. Perhaps the only drawback of plastic bottles is their lightness. So, a sudden wind can easily scatter them throughout the garden. But this is also not a problem - pour earth or sand inside the made plastic crafts, thereby strengthening and weighting the product design.

A plastic bottle allows you to realize a variety of ideas in life, for example, you can make various figures with your own hands. An example is plastic bottle frog.

To create cute figures frogs will conduct a master class. Everyone knows that frogs are able to attract money to the house and bring good luck.

Frog made of plastic bottles (master class):

take two plastic bottles with a capacity of two liters, one liter plastic bottle, wire and paint;

cut two bottoms from large plastic bottles and insert them into each other;

cut out the legs from one plastic bottle for the future princess frog and attach them to the body with an awl and wire;

then cut off the bottom of a liter plastic bottle for a frog. Cut a beautiful crown with beams;

the cut out crown must be immediately attached with a neck using an awl and wire;

at the end of the manufacturing process, it is necessary to paint and paint the craft in order to completely confuse everyone, what this funny princess is made of. This is best done with acrylic paints. They fit perfectly on the plastic. You can also apply paint in spray cans. The body of a plastic frog is painted, of course, in green, and the crown in a golden or yellowish tint. Carefully draw the last details - eyes, mouth and so on. Try to give what the frog princess is made of, plasticity, a cheerful and smiling mood.

Such plasticcrafts look best   on stones, and not in the grass, with which the princess frog will simply merge and get lost. An ideal option would be to place it near a small pond or in another conspicuous place.

Another way to make a plastic frog:

take two bottles of two liters and one half-liter bottle;

prepare a small skein of copper wire;

you will need yellow and green paint for plastic in order to give a beautiful shade to the frog. It is better to use spray paint;

to create a cute frog face, buy a thin brush and acrylic paints in black and yellow;

at the first stage, a frog body is created. To do this, cut the bottom of two-liter bottles. The width of the workpiece for one will be five centimeters, and the other four centimeters;
first you need to draw a line with a marker to make an even cut;

now be careful - on the remaining bottle you need to draw two frog legs (look for a stencil on the Internet if you can’t do it yourself), paint the resulting parts with green paint and let it dry well;

now you need to form the body of the frog. A larger blank will become the body, and a smaller one will become the head. Puncture a large workpiece with an awl from the sides and attach using the wire foot. Insert one part firmly into another;

draw a beautiful face for the frog princess. Please your children by showing their creative abilities and adding more fabulousness to the character;

a small bottle will serve for the crown, and the cork will be the base. Paint the cut crown with yellow paint and try to wire it to the head.
The frog princess is now ready to take pride of place in your favorite garden.

Such a figure can be made with another, simpler method. In this case, it will serve not only as a decoration of the garden, but also serve as a small functional box in which spare keys or other important little things can be stored.

To create such a craft   you need to take two green bottles so that you don’t have to paint them later. Also prepare awl, scotch tape, thread, zipper and felt-tip pens.

Due to the fact that we will need the lower parts of the bottles, we tape them at the required height. Make a cut along the upper border of the tape. As you understand, here the tape performs the role of the line drawn by the marker.

Now you need to pierce both blanks with an awl through the tape. This is necessary in order to subsequently sew lightning to the plastic. Remove the tape, attach the zipper in the buttoned form to the two halves and fix it with tape. Sew a zipper. Try to make the stitches even, beautiful and neat. Then remove the clips. In front of you is a beautiful fastening box. But while she does not look like a frog at all.

Now it's up to your imagination and creativity. They must turn the craft into a real frog. The muzzle is fairly easy to draw using waterproof markers. Convex eyes can be made from old traffic jamshaving previously painted it green

A ready-made plastic frog princess will be an excellent decoration in your garden and will delight visitors with its unusual appearance.

Hedgehog made of plastic bottles (MASTER CLASS WITH PHOTO)

How fast and easy   make a hedgehog out of plastic bottles   for a summer residence or garden plot? If desired, a personal plot can be decorated with interesting, original flowerbeds and products from plastic bottles.

Hedgehog from plastic bottles is quite easy to do. It is necessary to cut off the top of the bottle so that it looks like a bucket in which the neck and cap will serve as a handle. You need to find a bottle so that it is the most suitable in shape. You need to focus on the main thing - the face of the hedgehog. It would be ideal if it was a little elongated.

Paint is also needed. The best option would be acrylic paint. It is very suitable for plastic and goes well with it. When painting crafts, there is one important secret. Plastic bottle   should be perfectly clean. Therefore, rinse it thoroughly with warm water, remove all labels and dry thoroughly. Otherwise, if the plastic bottle remains dirty, the paint will immediately begin to peel off along with the existing dirt and the hedgehog will turn out untidy.

The master class, as shown in the photo, gives sequential steps in the manufacture of hedgehog crafts from a plastic bottle. The first step, as can be seen in the photo, in a large plastic bottle, it is necessary to cut out that part of it that is intended for a decorative flowerbed. This is done with a sharp knife or good scissors.

The next step in making the hedgehog is to color the bottle in a natural color. The same goes for other parts for making the hedgehog. You can paint the lid (cork) of the crafts in black. This will be the nose of the hedgehog. Eyes are usually painted. To do this, make two circles with white paint, and paint the pupils inside.

The photo shows that the ears of the hedgehog can also be made with your own hands from a plastic bottle. . Cut them first, and then insert them into the slots made with the knife. Ears can also be drawn.

The master class, as shown in the photo, ends with filling the hedgehog flowerbed with fertile soil. Also use different fertilizers so that the planted plants bloom better. Then you need to sow the seeds of lawn grass into the soil. After a while, the seeds will germinate, begin to give friendly shoots, this will be the hedgehog spines. Thus, the work on creating a plastic hedgehog flowerbed will be completed.

The same principle allows you to make other numerous animal figures. . Imagine and creativity will gradually drag you into their networks.

Let's talk about one more option for manufacturing a plastic hedgehog. It can be placed anywhere - on the lawn, in the garden or at home. Hedgehogs made from plastic bottles are not afraid of any weather.

To make a plastic hedgehog you will need:
  plastic bottle;
  two white plastic bottle caps;
  ten pine cones (and more - for a bulk bottle) of approximately the same size;
  plasticine;
  polyurethane foam or Moment glue.

The technology for making a hedgehog from plastic bottles always starts with degreasing the bottle. Use a soap and water solution for washing. After thoroughly cleaning the plastic bottle, it must be thoroughly wiped and dried.

Using Moment glue or polyurethane foam, glue pine cones onto a dried and prepared plastic bottle. Gluing is best to start from the central part, which will be the back of the future hedgehog. Each pine cone must be glued separately. Be sure to make sure it holds tight and start gluing the next one. It happens that you did not see and the pine cone peeled off. Put it back if adjacent cones are already glued will be very difficult. Therefore, try to fix them firmly immediately.

After you cover the body of the hedgehog with cones, needles, proceed boldly to create its nose. It can be made from a plastic bottle cap. For realism, gently glue the nose with black plasticine.

For the eye you will need prepared two white covers. Carefully paste in the center circles of black plasticine, which will become the pupils of the hedgehog. Glue the eyes to the face of the hedgehog using a mounting foam or glue.

The craft is ready. It's time to decorate it. What can you come up with for this? Of course, it can be leaves, berries, apples or mushrooms on its back. All this is very easy to mold from plasticine. . Gently lay the fashioned crafts on the hedgehog's needles. From plasticine, you can also fashion a small hedgehog. For such a fun friend   instead of cone needles, ordinary sunflower seeds will do.

Here are entertaining crafts for the garden and ready. It's time to install them in your favorite garden places.

HOW DOES AN ELEPHANT FROM A PLASTIC BOTTLE?

A funny elephant from a used plastic bottle can be made by yourself. To do this, you will need three plastic bottles. If you make such a craft with your own hands, as shown in the photo, then it will turn out to be very cheerful. Main difficulty in the manufacture of a do-it-yourself elephant from an ordinary plastic bottle   is how to make a trunk and ears. You will not regret it if you take your family evenings to such an unusual and enjoyable pastime.

To craft the plastic elephant shown in the photo, you will need the following materials:
  plastic bottles;
  paper cutting knife;
  traffic jams;
  Scotch;
  glue;
  raw rice;
  color foam rubber;
  thin colored paper;
  plastic eyes;
  wire;
  drawing pin;
  scissors;
  wire.

The technology of manufacturing an elephant from plastic bottles:
  body and legs manufacturing - it is necessary to cut off with the help of sharp scissors or a knife the lower part of two bottles, ordinary, plastic, 10 centimeters high, from which legs will be obtained. In this part, you need to pour a little cooked rice for stability. Next, attach the legs with tape to a liter bottle;

To make a trunk, you need 6 corks from ordinary plastic bottles, from which, using a nail and a hammer, make in the center of each hole. Then we string the resulting corks onto a wire curved in the shape of a trunk. It will need to be fixed to the body. To do this, make a small hole in the lid of a liter plastic bottle;

The resulting craft must be covered with thin gray paper, on which glue must first be applied;

Now you need to add additional details to the craft   - glue foam rubber gray ears, foam pink fingers, eyes and tusks;

Using the pushpin, you need to make a hole for the tail, and then screw in any rope with a tassel at the end.
The plastic elephant is ready.

HOW THE BEES ARE MADE FROM PLASTIC BOTTLES (MASTER CLASS WITH PHOTO)

Bees from plastic bottles look great in the garden or any other interior, giving it a special decorative and unique character.

Such an article, made by hand, as seen in the photo, will look nice as an ornament on a flower bed, as well as a decor for a flowerpot with flowers in the room interior. Bees from plastic bottles can be hung on a tree. You will get a funny composition consisting of a whole swarm of bees.

Master class on the use of plastic bottles for making bees:

What a plastic bee can be made of - materials:
  plastic bottle from used mustard for bee base. It must be thoroughly washed with a good detergent in warm water. Be sure to remove any stickers or labels from it. Wipe and dry;
  black paint or black tape;
  the middle part of a white plastic bottle;
  glue;
  wire;
  rod;
  buttons
  scissors or a sharp knife;
  awl;
  candle;

Making the crafts of the bee shown in the photo:
  First you need to apply strips to the bee's body with a black insulating tape. Just wrap two or three layers of insulation tape to make an orange-black bee. In the absence of tape, black ink can be used. An ideal option would be latex paint. It is great for plastic. Paint very carefully and accurately;

Stick eyes and nose to the bottom of the bottle. Buttons are just useful for their manufacture. For eyes, choose larger buttons, and for the nose - smaller. Eyes do not have to be buttons. To do this, you can use factory blanks sold for the manufacture of dolls and other children's toys;

Make a mustache out of wire. Master class for making bees from plastic bottles   suggests that the size of the bee will be the size of the bottle itself. Therefore, the length of the antennae will depend on this. The longer the bee, the greater the antennae;

Cut the neck and bottom of a white plastic bottle. Cut its middle part along. You will get a plastic concave rectangle that needs to be straightened. This can be done with a candle, and then put under the press for a while (usually heavy books can serve as the press). Even if the rectangle is not perfect, don't be discouraged;

Cut the wings out of a piece of white plastic, having previously made a sketch with a marker;
  then with an awl heated by a candle, holes are made in the plastic - two small above the eyes, one through the bottles through the center, one from white plastic in the center of the wings;

Insert the antennae of the plastic bee;
  put the prepared torso on the rod and attach the wings. You can fix the rod on the flowerbed, in a flower pot or other place of your choice.

The plastic bee is ready. What it is made of, even no one will even guess

Similar crafts made from plastic bottles on animal themes cannot be exhausted. Imagine on this subject.with your children . They will also give you new ideas. Engage in collaborative creativity to decorate your garden, garden or other interior. it   bring you closer to your children, and the garden will get wonderful decorations .
NEXT ARTICLE: