Make a chair out of paper. Ways to create paper furniture with your own hands, diagrams and important nuances

A small paper chair can be used as a decoration or toy in a homemade dollhouse. You can make such a craft within 15–20 minutes.
To make it, you only need a piece of paper or cardboard and a little patience.

Simple origami paper chair diagrams

A miniature chair is very easy to make using the origami technique. To do this, you need a sheet of paper 20x20 cm in size. Schemes for manufacturing can be found on thematic sites and downloaded from the Internet.

There are also many books on this technique. However, it is quite possible to experiment and create your own scheme. There is a very simple scheme for making a chair, understandable for both adults and children.

Follow the strict sequence of actions:

REFERENCE! A regular chair from a simple origami diagram is easy to make in 5 minutes.

IMPORTANT! In the origami technique, strictly follow the recommended steps and try to make all the folds as accurately as possible with the smallest margin of error.

Stages of making a chair out of paper with your own hands.

Consider creating a paper chair in stages. This option is quite difficult to execute and may not work the first time.

Read and repeat the following steps carefully:

• Take a square piece of paper and fold it diagonally twice.
• At the same time, each time return the sheet to its original position.
  It is important to make the diagonals visible.
• Next, you need to get a horizontal fold line. To do this, we also bend the sheet and immediately return it to its unbent look.
• We take the sides and connect them to each other so that we get a triangle.
• Fold back the left edge and direct it towards the center. This is a kind of mark at the bottom of the triangle.
• We direct the right tip to the resulting mark, and then tilt it downward.
• We bend the lower part twice so that the product is thinner.
• We bend a small corner in half and direct it to the left side.
• Next, we straighten it. It is necessary to insert some thin object into the corner.
• Then we straighten the corner and see a part that looks very much like the leg of the future
  high chair.
• Next, you should make another leg.
• In the same way, we get a small but noticeable mark and bend the right side to the center. And bend the left corner to the right to the mark and bend the corner back and down.
• Then the lower part must be bent in half.
• We repeat all the steps for the second leg in the same sequence. As a result of the work done, the chair already has two supports.
• We are starting to manufacture the third support.
• We tilt the second part of the right corner to the left.
• We tilt the lower corner back up to a line located vertically.
• We bend the left side to the right, and direct the bottom corner up. We open, straighten and get a small figure in the shape of a triangle.
• Fold it in half and get the third leg of the craft.
• The fourth support can be made using a similar and already proven technology as the previous one.
• Bend the sharp corners of each leg up.
• We make the back of the product. To do this, bend the top of the workpiece back in the opposite direction.

A simple way to make a chair out of cardboard

An ordinary home chair or other furniture can be used as a prototype. It must be scaled to a miniature format and all the dimensions of the future craft must be written.

Consider the main stages of creating a chair from cardboard:

• We draw the components of the future product on cardboard. These will be four strips for the legs of the chair, two parts of the seat, the crossbeams, the back.
• First, let's make the chair legs. They are made from a rolled-up sheet of paper.
• We glue the legs and the first part of the seat.
• After the adhesive has dried, glue the legs to the second part of the seat.
• For greater strength and reliability, we make a kind of crossbeams-partitions to the chair legs. Everything is like a real big chair. They make the craft more stable, which makes it possible to put your favorite doll on it.
• We connect the back and seat together.

There is an easier way to make doll furniture:

• To do this, the cardboard sheet must be connected in the form of a cylinder with a diameter equal to the area of ​​the seat.
• Next, you need to place the cylinder vertically and outline the height of the chair and its legs.
• Next, you need to cut out a piece of cardboard in such a way that you get a kind of ottoman without legs.
  So that the doll can sit on it, the empty space is filled with paper and the seat is glued.
• The chair is ready.
• You can leave it that way, or you can paint or decorate it.

ATTENTION! You can use cardboard of different quality and texture. It can be multi-layered, matte or glossy.

conclusions

In such a simple way, after practicing on a high chair, you can make a whole set of things for a dollhouse. This requires inexpensive and available tools such as cardboard, paper, scissors and glue. There are many proven simple schemes in the origam technique and.

And also such products are useful for adults as exclusive elements for the interior. You can use more expensive and prettier paper for small crafts. So, peculiar miniatures look beautiful. For example, this could be a table and two chairs. Small dishes can be placed on them.

We hope this article was helpful and will help you to do a lot of interesting miniature things.

When a child has a doll, pretty soon every kid begins to think about arranging a home for her. With the modern development of the production of toys in the store for your favorite doll, you can buy almost any furniture or just a whole house at once. However, it will be much more fun to equip everything with handmade items. This does not require any special skills or expensive materials such as plywood, wood, metal or plastic. You can simply arm yourself with glue, scissors and paper. And how to make furniture out of paper for dolls, we will consider in this article.

In what ways is doll furniture made of paper

There are many ways to make paper furniture today. Each of them has its own advantages and disadvantages. Here are the most famous ones.

• Origami technique.
• Manufacturing of furniture according to drawings.
• Bonding according to color schemes.
• Weaving from paper strips or tubes.
• The use of matchboxes as a "building" material.
• Manufacturing of corrugated board furniture.
• Painted furniture.
• Manufacturing of paper furniture from combined materials.
• Papier-mâché furniture.

While these techniques are all different, they use the same material - paper and paperboard derived from it. Whichever one is chosen, one rule is invariable for everyone: the manufacture of doll furniture requires special care and attention, because it is almost a piece of jewelry.

Paper requirements for toy furniture

Considering the question of how to make furniture out of paper for dolls with your own hands, it is worth remembering that each of the manufacturing methods has certain requirements for paper.

Almost all of the above techniques require thick paper from 90 g / m 2. It should bend well and not delaminate at the fold. However, origami paper needs a lighter weight paper that can withstand multiple folds and retain its beautiful appearance.

The same requirements apply to cardboard. By the way, for the manufacture of furniture from it, you can use both ordinary stationery cardboard and packaging corrugated cardboard.

If the doll's furniture will be made using papier-mâché or weaving, old newspapers or magazines are perfect as consumables.

How to make paper furniture with your own hands: origami

The simplest method of making furniture, which does not require special skills, materials, and most importantly time, is origami (the art of folding paper figures).

All you need is a square sheet of paper and a diagram of how to fold it correctly. You don't need any glue or origami scissors (unless, of course, it's a modular subspecies).

When making doll furniture in this way, you should first practice on paper from a math notebook (because of the cells it will be easier to fold). And, having mastered this technique, make a table, chair or something else out of special paper.

Diagrams of how to make a chair, table and sofa using origami technique

As an example of how to make paper furniture with your own hands (in stages), below are three origami schemes. The size of the finished product folded for each of them depends on the size of the sheet. After practicing several times, it will not be difficult to calculate it in relation to the height of the doll.

The first diagram shows a paper technique.

It would be nice to add a chair to the made paper table. How to do this is shown in this diagram.

Instead of a paper chair, in addition to a table, it is a good idea to use a sofa assembled according to the diagram below.

for paper dolls without glue

Besides origami, there is another way to make paper furniture without glue. However, in this case, you cannot do without scissors. They will be needed to cut doll furniture according to the scheme. Then you need to fold it.

A chair or stove made in this way looks more elegant than origami products. But when creating furniture in this way, you need to very carefully cut and fold it so as not to spoil it.

It is best to use paper with a density of about 100 g / m 2 for printing such diagrams.

The finished product can be painted to your liking.

Making doll furniture from color schemes

In the old days, paper cut-out kits were available at almost any bookstore. Follow the instructions and use scissors and glue to create a charming dollhouse or palace with furniture.

Knowing the basics of working with any graphic editors and the principles of building such schemes, you can easily make such blanks. If making a whole palace for a doll is not included in the plans, it would be nice to create a wardrobe, chair or bed and, having printed them, make vintage furniture for your favorite. Needless to say, only laser printing is suitable for this method, since inkjet, although more colorful, can float when in contact with water or simply burn out over time.

Regarding the choice of glue for this furniture, it is best to use double-sided tape or it is also acceptable to use a glue gun, but very carefully.

Weaving from paper tubes as one of the ways to make doll furniture

Weaving is a fairly ancient and popular type of needlework. Today it is experiencing a new renaissance. However, modern craftsmen increasingly use paper tubes or ribbons for weaving, not vines. The finished product is painted, and then varnished and in this form can serve for many years.

Choosing a way for yourself how to make paper furniture with your own hands for Barbie, it would be nice to take advantage of this: today, the tendency to use wicker paper furniture in their homes is becoming more and more fashionable.

Among the advantages of this technique are the elegance and strength of the finished furniture, as well as its realism. In addition, the materials will cost you nothing, because they are unnecessary old newspaper or magazine sheets.

But among the minuses - in order to make doll furniture in this way, you must first master the weaving technique, and also have a certain pattern.

But, having learned how to create toy tables, wardrobes or armchairs for Barbies, it would be nice to try your hand at making furniture of human sizes.

Matchbox furniture

Among the most used materials for the manufacture of doll furniture are matchboxes. In fact, they act as bricks for creating tables, dressers, beds, etc. Moreover, if some masters simply paste over the finished product with colored paper or cloth, others decorate furniture from matchboxes using decoupage, giving the product a realistic look.

To make sure that a very beautiful furniture for a doll can be made from a matchbox, below is a master class on making a toy chest of drawers from two matchboxes. To complete it, you will also need stationery, black and white paint, double-sided tape, sandpaper and two beads.

Wardrobes, desks and kitchen furniture can also be successfully made in this way. The main thing is to have a lot of matchboxes in stock.

Furniture for dolls made of cardboard

Quite popular today is a technique that tells how to make furniture for dolls with your own hands from cardboard and paper. This method is used to make not only furniture, but also entire doll houses.

For this method, it is most rational to use corrugated cardboard, the source of which can be any box from under a parcel or some kind of household appliances.

Most often, furniture made of this material is pasted over with paper or cloth, sometimes it is painted. However, in recent years, eco-style has become especially popular. Following it, corrugated board furniture is not painted, but is left as it is. At the same time, do not forget: if something was printed or written on the front side of the box, it must be re-faceted so that the picture remains hidden inside the product.

It should be noted that the production of real modular furniture from corrugated board is becoming a fairly popular trend in the modern world.

True, it is not very durable, but it is affordable at its cost and is environmentally friendly, unlike plastic, and is easily disposed of or transported when moving.

Painted furniture

When choosing how to make paper furniture, do not underestimate the simplest ways. One of them is to simply draw furniture on paper or cardboard and place it in the dollhouse.

Of course, with the voluminous furniture made according to some of the above methods, the drawn home decoration cannot be compared, but as an option it is quite suitable for novice dollhouse designers.

By the way, in addition to paper, you can also draw on corrugated cardboard. Notably, some modern designers are starting to use the partial hand-drawn furniture method to decorate real homes.

Furniture made of combined materials: a master class on creating openwork chairs out of paper and a cup for coffee

When fantasizing about how to make furniture out of paper, you should not neglect combining it with various improvised means, for example, with paper boxes for chips or cups for coffee.

For example, a small cylinder-shaped box will make an excellent cradle for a baby doll.

And from a paper coffee cup in combination with paper strips for quilling, you get a very elegant doll chair.

The seat and legs of the future chair are cut from the bottom of the glass. Two cotton swabs are glued between the legs to add stability. The leftover paper from the cup will work as material for the back of the chair. suitable for decorating a seat with weaving, as well as for making graceful curls on the legs and back of the product.

Papier mache

Among the many ways to make furniture out of paper, the papier-mâché technique (using a mass of paper and glue for modeling) stands apart.

Most often, masks or some kind of figures are made in this way, however, it is quite suitable for doll furniture. Like paper tube weaving, the papier-mâché technique is very economical, but at the same time it is simpler.

Furniture made in this way must have a frame and dry well before it is painted or varnished. By the way, if you dare to add a little gypsum to the paper, the product will become much stronger.

Each of the above methods for making paper furniture is unique in its own way. Some are complex, others are easier to execute. But whichever one is chosen, the main thing is to put your soul into your work. Then the result will surely please, and your favorite children's doll will have the best house in the world.

Tatiana Titova

Purpose: for the game, layout, competition, gift.

Target: continue to teach children to work with paper; learn to cut by pattern; paint ready-made crafts; develop creativity and aesthetic taste.

Material: strips of paper measuring 5cmx15 and 6cmx15; scissors, markers.

1. Organizational moment.

Children, last time we made little men for the collective work "Winter Fun". The result is a beautiful collective composition. And today I propose to make chairs and other little people for our characters, whom we will put on chairs.

2. Demonstration of the sample. Look at the children, what funny paper toys you can make with your own hands, with which you can also play.

2. Demonstration of the method of making a chair from thick printer paper.

What material is the chair made of? (from paper)

Consider a pattern with the children.

How are we going to make a chair according to a pattern? (cut out along the solid lines, and bend along the dotted lines).

3. Demonstration of the method of making paper men.

What material is the man made of? (made of white paper).

How do we start work? (first cut out and then bend along the dotted lines).

Little people are very flexible: they can take different poses.

We paint the finished crafts with felt-tip pens.

4. Independent productive activity of children.

5. Outcome. Children, you did a great job. Come up with names for your characters and play with them.

Thank you for attention!

Related publications:

Educators: Gribanova Svetlana Valerievna, Cherednichenko Natalia Vasilievna Dear colleagues, we want to tell you about the competition, which.

Abstract of the GCD for creativity-paper design "Frog" in the senior group Topic: "Frog" Summary of GCD for creativity (construction from paper) in the senior group, taking into account the individual characteristics of preschoolers.

Summary of productive activities with children of 7 years of age "Mastering board sports games" Educator Alekseeva Oksana Evgenievna Sevastopol Program content: Educational: - To enrich children's knowledge about the types of sports.

Conducted by: educator S. R Sidorova Implementation of the content of the program in educational areas: "Artistic and aesthetic development", "Physical.

Summary of the lesson in the senior group "Designing from paper" Integration of educational areas "Social and communicative development", "Cognitive development", "Speech development". Types of children's activities:

Designing in the second junior group "Table and chair for a bear" Construction Theme: "A table and a chair for a bear" Continue to train children in building pieces of furniture, the ability to make the building stable.

The little owner of the dollhouse will definitely want to furnish it with beautiful furniture and will ask her parents to help her with this. The house must have a sofa, table, bed, chairs and other pieces of furniture. Of course you can buy them. But it can be easily made with your own hands, using a minimum of funds.

Approximate dimensions

Before thinking about how to make a table for dolls on your own and from what material, you need to decide on the size. It is necessary to build on the growth of the doll itself and the size of the house. The interior will look beautiful if all the furniture is about the same scale and style.

The easiest way to make all objects proportionally the same is to calculate the scale. It is necessary to divide the average height of a person by the size of the doll. You will get a number by which you will subsequently need to divide all the real dimensions of the furniture in order to get the doll ones.

For example, a doll's height is 20 cm.Divide the average person's height of 175 cm by 20 cm = 8.75. The real dimensions of human furniture must be divided by this number to get the dimensions of doll furniture.

On average, dolls have a size from 7.5 to 15 cm.If the doll under which this or that piece of furniture is made fits these parameters, you can use the following sizes:

Furniture for dolls from matchboxes

This is just a godsend for creating a dollhouse setting. You can create a huge number of pieces of furniture from them:

An excellent material for making doll headsets is cardboard. It is very easy to cut and glued with regular PVA or hot glue. All furniture in the house can be made from an old cardboard box. The only drawback of cardboard- this is that without decoration and finishing from above with any material, it does not look very beautiful.

Corrugated packaging cardboard will not last long, as it quickly crumples and loses its shape. Better to use scrapbooking cardboard or just thick cardboard.

Gluing a cardboard bed is quite simple. It is necessary to cut the walls of the bed to the required size and connect them with glue. The back can be decorated with wrapping paper or decorated using decoupage technique.

You can make a bed without the help of glue. The walls will be fixed using grooves cut in the walls.

Making furniture items out of paper

If it is not possible to buy ready-made doll furniture, you can make it out of paper. How to make a chair out of paper so that it is strong and does not wrinkle right away? Roll the paper into tubes! Craftsmen have been weaving anything from newspaper tubes for a long time. Headsets for dolls will not be an exception. Weaving patterns can be found on the Internet.... Such items will decorate the house and look very cozy. In addition, they will be quite durable if painted or covered with several coats of varnish.

To make paper furniture you will need:

You need to twist thin tubes from paper. This can be done with a knitting needle. They should dry well. Then the tubes need to be glued along with glue. It is best to use a hot gun, this will make the connection stronger and the paper will not get wet.

In this way, small blocks (walls) are glued together, which are then connected to each other. They are easy to cut into the desired pieces. For better bonding, wire or thread can be used.

Then shelves and doors are made in the same way.... You need to fix the doors with tape or wire.

Legs and handles are made from the same tubes, rolled into a roll. The edge must be glued with hot glue.

Plywood doll products

A doll's closet for outfits can also be made of plywood. He will serve his mistress for a very long time. You can connect the walls and shelves with each other with hot glue or PVA. A hanger bar can be made from a wooden skewer or a Chinese stick. Hangers are made from unbent paper clips.

The bed, table and chairs can also be made from this durable material. Some craftsmen even carve beautiful patterns on such furniture, imitating carved furniture. It looks very nice. Plywood needs to be painted or covered with fabric.

It is better to fill the sofa with cotton wool or foam rubber so that it takes shape, and then cover it with fabric.

The table can be made as square or round with a jigsaw. The legs will be wooden skewers or sticks. Chairs are made in the same way.

Cardboard box furniture

From one TV box, you can make all the furniture in the house. To create it you will need:

• The box itself.
• Double sided tape.
• Scissors.
• Plain wide tape.
• Glue gun or PVA glue.
• Materials for decoration.

All furniture must be cut out, cut into the necessary parts and glued.

Next, the most interesting process begins - finishing. Cardboard can be painted, pasted over with wallpaper or paper ... On the front of the cabinet or a dressing table, a piece of foil should be glued, imitating a mirror. You need to make a tablecloth on the table, and pillows on the sofa - this will add comfort.

It is imperative to involve the child himself in the decorating process. This is a great opportunity to feel like an interior designer and be creative. Everything will be used: small stones, shells, beads, rhinestones, stickers.

After the completion of the design work, the arrangement of furniture in the house begins and filling it with details (vases, figurines)

Of course, utensils are needed in the kitchen. It can be cut out of cardboard, wood, or molded from plasticine. How to make a bottle for dolls is a more complicated question. Here you can use bottles from drops for eyes or nose, run out of samples from perfumes.

Wardrobe made of wooden rulers

Another way to quickly create a doll closet. To make one cabinet, you will need about six rulers. You will also need a jigsaw and PVA glue for work..

Cut the rulers and sand them so that there are no splinters. We did everything to glue it with PVA glue. After the product has completely dried, it can be painted. For a beautiful, even color, you first need to cover the cabinet with a layer of white paint, and then with the desired color.

In the same way, you can make tables, chairs, bedside tables and other furniture for dolls.

How to make furniture out of clothespins

It is not necessary to use wooden, plastic clothespins are also used. They are varied in size and color, but with wooden clothespins, furniture turns out to be cozier and more beautiful.

To make a table or chair from clothespins, you need to separate them. Halves of clothespins are used, which are connected to each other. Connecting them around, make a tabletop, legs can also be made from halves of clothespins.

The beauty of this material is that you can easily shape the clothespin or cut as many as needed. Some people make theater on clothespins with their own hands. The templates can be found on the Internet.

Making furniture for dolls is quite a fun process that can involve the whole family. Dad can be involved in creating objects, gluing, curling and preparing for decoration. Mom and daughter will be happy to paint furniture, decorate it, sew tablecloths, pillows and bedspreads. This is a wonderful family activity that will greatly delight the little princess.

Attention, only TODAY!

Furniture made of paper is in demand in interior decoration - simple figures can be made with your own hands. Another area of ​​application of these items is toys for children. Every child will want to have a dollhouse with beautiful handmade paper furniture. To make such products, additional origami skills are not required, you just need to follow the instructions provided.

Origami furniture is an interesting trend that requires special attention. The production of such figures does not take much time, and the resulting result pleases adults and children with its appearance. The main feature of the products is the maximum similarity with real headset items: sofas, tables, wardrobes, armchairs and dressers.

Using such furniture in real life is unlikely to work, but objects will be a good option for creating a layout of a future room or designing a dollhouse. To achieve similarity with real furniture, textured paper is used in the design, imitating various surfaces: stone, leather, fabric, wood and metal. When creating objects, it is better to use paint that does not completely saturate the material, but only gives it color.

The following materials are used for manufacturing:

• Base material - matchboxes, a little corrugated cardboard, colored thick paper;
• Pieces of fabric, decorative film and textured paper for finishing finished items;
• Scissors;
• Black pencil or pen;
• PVA glue or any other glue for working with paper.

You can work with paper yourself, or you can connect loved ones to the process. Then the resulting products will be diverse, but together they will form a single ensemble.

How to make the following options

You can make anything out of paper. You just need to show imagination and perseverance. Consider master classes for making popular types of furniture. Based on the detailed instructions, you can make other types of interior items. The most popular are:

• Sofa;
• Dresser;
• Armchair;
• Closet;
• Table.

To find out how to correctly design paper furniture, you need to consider each option separately.

Sofa

A paper sofa will look great both in a dollhouse and in a miniature copy of a real interior. Before getting started, pay attention to the paper sizes:

• For miniature options, you should choose colored paper 10x10 cm;
• For execution in medium sizes, you need to give preference to a workpiece 20x20 cm;
• To create a large sofa, the size of the material is proportionally increased.

The color of the paper is chosen at will, but it is better that it fits into the future interior or imitates real furniture. Having picked up the materials, you can start making:

1. The square sheet is bent in half, after which it is opened and folded perpendicular to the first;
2. The next step will be additional hem. The bottom edge is folded to the mid-fold, then folded again. At the exit, 3 fold lines are obtained, not counting the central one;
3. The lower thin strip is wrapped in the first fold, after which two identical triangles are laid by folding the side parts diagonally;
4. The accordion is folded to the end, and the upper part of the workpiece is bent to the middle. The workpiece is turned over;
5. The lower corners are folded up in turn, and the upper corners are folded down diagonally;
6. The workpiece is turned over again, bending one corner inward. This is how the back is formed.

Having turned the product over, it is necessary to form the legs of the sofa and it will be ready. Such a beautiful and original item will become a real decoration of a toy living room or an original art object.

Bend the sheet in half

Once again in half

Making three folds from the bottom

Making corners from the bottom

Raise the lower part up

Making bends to the sides

Align the back

Making legs

Ready product

Dresser

The most optimal and profitable way to create a paper chest of drawers is to use matchboxes. They slide out conveniently, so making an item is not difficult. If you want to make a chest of drawers out of paper, then you should use paper blanks. It is convenient to store small, light things in this chest of drawers. Beads, beads, clasps, clips and other little things for creativity and needlework will perfectly fit here. The top of the dresser can be painted with colored markers, giving it an original look.

Chest paper construction consists of the following steps:

• Drawing a diagram for creating boxes: this stage is skipped if ready-made matchboxes or other blanks are used;
• Cutting out schemes along the lines, as well as assembling boxes for future chest of drawers;
• The entire chest of drawers is pasted over with cardboard for strength, but there is no need to glue the front part where the drawers will be inserted;
• The fronts of the boxes are pasted over with any material - cloth, film, leather, and they also attach a bead or button as a handle;
• Dresser legs can be made from push pins - for miniature furniture or toilet paper pipes - for large items.

Such a chest of drawers is also a good gift for a girl with a lot of jewelry: all the jewelry will fit in the drawers.

Making boxes

Create drawer items

We connect the elements

We decorate the cover with patches

We glue the facades of the boxes

Create handles

Ready chest of drawers

Armchair

Making a stylish chair out of colored paper is also not difficult. To create it, you don't even need glue and tape, you only need a sheet of paper of the required color. It should be noted that cutting out blanks from beautiful textured paper will give a better result than furniture made from ordinary plain material. In addition, if you find diagrams that depict pieces of furniture made in various styles, you can make an armchair that looks as close as possible to real furniture. For work, you will need one sheet of paper in the form of a square. Its dimensions are selected depending on the dimensions of the future product:

1. Fold a square sheet in half, then open it and press one of the halves to the center fold line;
2. Press the second part of the square to the center of the workpiece. Next, go over all the fold lines with your hand to clearly outline the lines that have formed. Open the workpiece and turn it over with the right side facing you;
3. One part of the 4 obtained lines must be cut off: this is done with scissors or a metal ruler;
4. Fold the workpiece across the lines obtained, visually marking the center, bend a triangle on the right. Do the same with the left side, in the end you should get two triangles superimposed on each other;
5. The middle strip remaining at the bottom is folded over the triangles. Each fold line is additionally smoothed with your fingers;
6. The strip, which was previously bent upward, is bent - it will serve as a seat. The side parts will become handholds, they must be glued from the inside to the seat.

It turns out an original and easy-to-manufacture paper chair. To diversify its surface, you can stick decorative paper imitating leather on the seat.

Closet

The design of the wardrobe is similar to the manufacture of the chest of drawers, which was described earlier. The difference will be that the frame should be higher, and in addition to drawers, shelves are needed. Some nuances of making a paper cabinet:

• For the blank, you must use a reamer from a rectangular sheet of thick paper;
• The ideal size will be A4, if you need a larger product, the size is proportionally increased;
• After you draw the diagram, it must be cut out: first, the main elements are cut out along the lines, after which they proceed to cutting the overhead valves;
• The frame of the model is glued together without doors;
• The doors are cut from the same paper. Later, they can be decorated with a film: the adhesive layer of such material will allow it to be applied to the base without any problems.

Finally, decorative handles are glued to the doors. For this, buttons or beads are suitable. The legs are made of thick cardboard.

Table

Assembling a paper table is not difficult, especially if you already have experience with this material. There are many options for creating tables, but beginners should choose a less complicated method. It consists of the following actions:

• For work, a square sheet of paper is used;
• All sides of the square fold inward to form mini-squares;
• Each square bends inward to form triangles;
• The triangles curve outward;
• The final stage is the formation of the legs.

To polish your countertop, stick beautiful decorative paper onto it or paint it with colored markers and acrylics.

Decorating

A separate step is to highlight the decoration of finished products. DIY furniture, the schemes of which can be found in this material, are decorated as follows.

If gouache is used for decoration, you need to mix it with PVA glue (1: 1). After drying, the paint will not print on the hands, and the product will receive additional rigidity.

Do-it-yourself paper furniture will be an excellent option for a dollhouse or designing models of a future interior. Making miniature objects is a fun activity that everyone in the family can share.

Drawings and diagrams