In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared ...

By Masterweb

30.05.2017 20:57

In the world of modern technology, it is difficult to imagine a person who does not have a mobile phone. With the entry of gadgets into our lives, accessories have also appeared, of which there are a huge number on store shelves and on the Internet. Often, a simple holder, case and other things to give character and style to a mobile device are far from cheap. Therefore, a do-it-yourself phone stand is a great solution for everyone.

Making an accessory is not at all difficult. To carry out the mission, only materials, time and desire are needed. There are many variations and techniques that will help everyone to do what they like best. So you should turn on the fantasy and use all the ideas.

What can you make a stand for a mobile phone?

Creating something yourself gives ample opportunities for creativity. Do-it-yourself phone stand can be made of the following materials:

paper; wood; plastic; gypsum; any natural materials.

In general, you can use all the materials that are at hand. The more intricate accessories there are, the more interesting the mobile phone stand will turn out to be. You can make the most incredible accessories with your own hands, which are not even on store shelves. Therefore, it is worth taking note of this option.

DIY paper phone stand

It would seem that what can be done from ordinary sheets? In fact, this material can make a great phone stand. It is not at all difficult to create it with your own hands. To get started, you need to prepare the following items:

colorful paper or white paper, which will then be decorated; multi-colored gouache, watercolor or acrylic paint; glue; a ruler for measurements; a simple pencil; scissors; various decorative ornaments that will be appropriate should also be kept on hand.

Properly organized space will help to make the stand for the phone with your own hands will be framed in a matter of minutes. Therefore, the one who embodied it will have a great opportunity to become the owner of a beautiful and convenient accessory for a mobile phone.
Sequencing:

First you need to figure out what shape the stand will be. After that, you need to draw templates of the required sizes on the sheet. Elements for the product are cut out from them. Then, carefully, according to the diagram that was previously drawn or printed from some site, we glue the necessary details. wait until all the elements are fixed. The next step is to connect the individual parts to each other. Let all the fasteners dry. After that, you can start decorating the product. At this stage, various sequins, buttons, beads and other small beautiful elements can be used. After decorating, the phone stand can be considered ready. We have created a masterpiece with our own hands. With the advent of such a device, there will never again be a problem with finding a mobile phone, because it will always be in its place.

DIY wooden phone stand

There are many options, using which you can translate into reality any idea. Why is a wooden holder better? A phone stand made of this material competes with paper products. Wood is stronger, more stable and more durable. True, to make a wooden stand, you can’t get by with sketches and ideas alone. In this case, you will also need:

special equipment; skills; the ability to work with wood.

Before you make a stand for the phone with your own hands, you should analyze your actions. If you have never worked with a tree before, then it is better to bet on a paper phone holder. And if you have experience, then for work you need to prepare:

tree from which the structure will be constructed; tools for working with wood; product diagram; felt-tip pen with which you can draw on wood; ruler; glue; accessories (buttons, beads, rivets); simple pencil.

After all the necessary elements are at hand, you can proceed to the direct implementation of the plan. The sequence of work is as follows:

First you need to find a suitable diagram for the product. Then you need to put marks on a wooden base, according to which the connector will be cut out in the future. The next step is to cut out the shape with the available tool. To do this, you need to glue the prepared spare parts. The next step is to make the product smooth. This can be done with a file or a special mains-operated device. When the surface is smooth, you can paint the finished shape with some color. After staining, you must wait for the product to dry. The work is completed by gluing the accessories selected for this mission. open with varnish, which will give shine and aesthetics.

In general, making a phone stand out of wood will not be a problem. Therefore, it is worth trying to translate such an idea into reality. After all, it is much more pleasant to put the phone in the stand, which was created by one's own hands.

Beautiful design of the phone stand

In no case should you forget about the decor. After all, it is the decoration of even the most unprofessional and amateur product that will give it color, character and mood. Therefore, it is worth looking at what interesting accessories are at home. It can be:

shells; buttons; rhinestones; beads; foil; colored tape.

In general, everything that is at hand and has an unusual look can be useful in the process of making a phone stand.

Not only a necessary accessory, but also a great gift

Having got the hang of it, you can not only use such a product for yourself, but also give it as a gift. Therefore, it is worth making a few spare coasters: suddenly someone will suddenly call for a visit, but there will be nothing to give! And a stand for a mobile phone is always useful, even if a person already has one, the second one will never hurt.

Mobile phones have become an integral part of our daily life. Even children already use them from the very first grades of school. In order not to leave your gadget just on the table, consider how to make a phone stand from improvised materials.

First option: from binders

Let's figure out how to make a phone stand with your own hands from what is in almost every home. There are quite a few ways. In this master class, we will make it from binders (paper clips).

This model is well suited for widescreen phones. It will turn out to be very convenient and practical, and it will take literally two minutes to create.

To work, you will need binders and a suction cup.

Production order:

1. Connect the binder to the suction cup (a towel holder will work too) in the place where the hook is located.
2. Attach the back of your phone to this suction cup when you need to put it down and you're done.

The advantage of this type is that you can place the phone in any position, both horizontally and vertically, or at an angle.

Second option: paper

When there are a lot of papers of different colors at hand, the modular origami technique comes to mind. Let's figure out how to make a phone stand out of paper.

To work, you need 24 white checkmarks and 23 pink ones. Check marks are the simplest element of modular origami.

To make modules, do the following:

1. The triangular module is made up of rectangles to make them the same size, take an A4 sheet and cut it into 16 or 32 small rectangles.
2. Fold the rectangle in half.
3. And again in half, then unfold to make a fold line in the middle.
4. Bend the edges of the rectangle to this line, and those where the first fold line goes.
5. From below you have formed a ledge, bend its corners up to the edge of the first part.
6. Now bend the entire remaining lower canvas up to get an even triangle on the back side.
7. Fold it in half. And you will see that you have pockets on both sides.

Now let's move on to our question, how to make a phone stand from such modules:

• Fasten white checkmarks in a circle.
• Then place pink ones between each pair. So you get a cone tapering upward.
• Continue assembling the structure to the desired height and you're done.

This method is suitable for those who like to work with paper using the modular origami technique, if you like to cut and paste everything more, then pay attention to the following model.

Third option: from a shampoo bottle

How to make a DIY phone stand from a shampoo bottle? The work will turn out to be very stylish, despite the simple materials, it will look expensive, as if purchased.

Manufacturing progress:

1. Choose the right size shampoo bottle.
2. Make a line in the middle and cut along it. For convenience, it is better not to do it straight, but to leave a protrusion with a slot on the back side, so that you can not only install the stand on the table, but also hang it on the wall.
3. Take beautiful paper with an ornament (you can use wrapping paper), wrap the stand with it and glue it.
4. Carefully cut off the excess wrapper around the outline. Your work is ready.

This craft will look great in your home, especially if you choose the right color and pattern for wrapping paper. You can independently come up with a form for such work or make according to the model. This was one of the many ways to make a phone stand.

Fourth option: from popsicle sticks

One of the most original options for making a phone stand is using Eskimo ice cream sticks. To do this, ask friends and relatives in advance not to throw out such sticks.

When you collect enough, they will need to be glued together:

• first make the bottom;
• then the backrest to the height of the phone;
• the side ones will look good when tilted.

You can connect parts not only with glue, but also by gluing a transverse stick for greater strength.

There are many ways to make a phone stand from scrap materials. We have considered only a few of them. It all depends on your mood and imagination. Even from the old designer "Lego" you can make a wonderful option or sew a wonderful wall cover from dense fabric.

Use any idea. Enjoy your creativity!

Mobile communication devices are in every home, they have become almost indispensable for a modern person and perform a lot of functions. Therefore, quite often they need to be kept not in your pocket, but on your desktop, so a smartphone stand is a necessary thing for everyone. There are many ways to make a phone stand, but one of the best options is of course wood, as it, despite its hardness, will not scratch the smartphone and will look good both in the office and at home on the table.

The easiest way to make a wooden phone stand with your own hands is to simply make it from a regular plank. The design of such a product is as simple as possible - a groove of the required width is made in the board and the stand is ready. Since the board has a large plane, and after you put the mobile into the slot, it will stand firmly and securely on the table.

The most important thing about this wooden phone stand is the area of ​​the base that will be in contact with the table, it must be large enough to handle the functional load. As a base, such a homemade phone stand can have any wood and can be shaped into any shape. And the manufacturing process itself is limited to the fact that a groove is simply made in the plank with the help of a milling cutter. The groove can be made flat or sloped, depending on the angle at which the device should stand.

When you make a stand for a smartphone with your own hands, it is important to sand it well, especially in the groove area where the mobile will stand. After all, if there are irregularities, then you can scratch the glass, and this will spoil the appearance of your gadget.

Complex design

If you want your mobile device to be always in sight, not lost in documents, and at the same time your table looks beautiful, solid, then the stand should be appropriate. To do this, you can make it not just from a plank, but from several parts. Don't worry, it doesn't require a lot of tools or material either. The most important thing is not to rush and carefully consider the design that your homemade product will have.

A good do-it-yourself smartphone stand, which is suitable not only for any phone, but also for a tablet, and at the same time will be as stable as possible, can be made from two small boards.

The design of such a stand is as simple as possible, two identical rectangular wooden blanks are taken. On the one hand, about a quarter from the edge, a slot is made to the middle of the board. It is important that the slot does not run at a right angle, but obliquely, so that the stand is more stable and has the correct slope of the plane that will support the phone. On both blanks, a slot is made up to half the width of the blank.

For someone who is just starting out, it can be problematic to find the right angle for the slot. But this is not difficult to do, just attach two parts to one another at the planned angle and just make marks on the side of the end. Well, in addition, so that the phone does not slip, you need to make a groove on a horizontal plank, or stick a small bar that will be a stopper.

After all the cuts are ready, it is enough just to sand the stand well so that the bumps do not scratch the phone case, and cover it with tinting or just varnish.

There are many ways to make a stand for a phone of this design, for example, you can make a curly vertical part of the stand, which will greatly improve its appearance. Forms can be a variety of hand, leaf, animals, and in general everything that you think of, since a tree can be given almost any shape.

How to choose a stand design

There are quite a few ways to make a smartphone stand, but wood options are not only durable, but also beautiful. In addition, they look much nobler than other materials, as a properly selected wooden accessory will decorate any design, regardless of its style.

Therefore, in order for your handmade mobile phone stand to be beautiful and original, try to choose the right design, size and color. Of course, you should not forget about such parameters as functionality and stability, since if a cell phone falls, it can simply be damaged.

You can make a variety of phone accessories at home and you don’t need a special tool for this. In most cases, with due diligence and patience, you can get by with a simple hacksaw, chisel, sandpaper and a piece of plywood. Then just glue your sample from small parts and at home it will also be easy.

Do not be afraid to experiment and fantasize so that the stand you made is unique, and not like everyone else. After all, mass production is organized in such a way that anyone can afford to buy beautiful and seemingly diverse things. But truly bright individuals prefer unique things in a single copy. Such things are not sold in stores, they can only be ordered or made independently. The second option is much better, not only in terms of economy, but also in terms of the manifestation of individuality.

Even if you do not have experience in making any wood crafts, do not be upset, as there is nothing difficult in this. It is enough to carefully plan everything, calculate what tools and materials will be needed, and only after that proceed to the work itself. If something doesn’t work out for you, then you can try again, rarely does anyone manage to do everything right the first time, everyone learns and everyone makes mistakes. But this is the only way to gain experience and learn to do things right.

Homemade mahogany smartphone stand.

Hi all! Today we will make for a mobile phone in the form of a dog - a symbol of the year.

Now you need to make a stand for it. To do this, we cut out a circle with a diameter of 70 mm from wood. Sand it down with sandpaper.

We take a few gears that are so small.

We also take epoxy and hardener.

We take plasticine and apply a thin layer on one of the sides of the internal cavity of the figurine and glue it with polyethylene on the same side.

We knead the epoxy glue according to the instructions and pour about 2 mm into the cavity of the figure. This will be the first layer. We are waiting for the solidification of this layer. Then lay out our pattern of gears and fill in the rest.

Our dog is dry.

We remove plasticine. We take sandpaper and bring everything into a divine form.

We mark with a pencil on the figure the point where the hole will be.

Drill make a small indentation.

Now we make a wooden chop that will fix it all. We insert the chopstick into the stand, spread it with PVA glue and also the lower part of the figure with a thin layer so that the glue does not protrude. We connect. Leave until completely dry. Next, we rub our entire product with herbalist impregnation.

Here's what we got.

How often, being at home, in the office or on the road, we cannot remember where we put our phone. To prevent this from happening, you should get comfortable and ergonomic stands that you can make yourself. A phone stand can be made with your own hands from the most unexpected materials at hand. How to do this, our step-by-step master class will tell.

How to make a do-it-yourself phone stand: options for office and car

Whether at work or in the car, we all need to always be in touch. At the same time, you don’t want to spend a lot of money on expensive coasters, because they can be made from waste and outdated materials.

Card stand.

The simplest option for a phone holder is a card holder. To make it, you need to carefully bend the unnecessary plastic card in two places, as shown in the photo below, preventing it from breaking.

Experience shows that a plastic card holder is very reliable and can withstand even air travel at times of strong turbulence.

Stationery clip stand.

To make a phone stand from stationery clips or from binders, as they are also called, you will need one large and one small clip. The legs of the small clamp should be placed between the holding part of the large clamp and placed on the table so that the larger clamp rests on its surface.

Similar coasters can be made in five minutes from clothespins.

Paper clips make a great car stand option. To make it, you need to disassemble the large clamp and slightly bend the metal parts, as shown in the photo below.

In order not to damage the surface of the phone, it is recommended to wrap metal fasteners with threads in several layers. We return the holders to their place, additionally fix them with adhesive tape and clerical gum. We fix the clamp on the ventilation shutters. The phone is securely fastened between the metal parts of the binder.

Paper stand.

Ordinary office paper, folded in a certain way, can even support the weight of a large smartphone. To make a stand out of paper, you need to measure the dimensions of the phone and adjust the pattern below for them.

Cut out the piece from paper, fold it along the dotted lines and insert the side pieces into the slots. This design is good because it allows you to charge your phone without removing it from the stand.

We study popular options for coasters for home comfort

A desktop phone stand for the home should not only be comfortable, but also durable, stylish and fit well into the interior of the home. Consider options for such products.

Stand made of newspaper tubes.

A phone stand made of newspaper tubes will be a wonderful gift and a great decoration for any interior.

To weave such a stand, you will need several pre-painted long newspaper tubes, scissors, knitting needles, a little glue and varnish.

We place six blanks parallel to each other at a distance of about 1-1.5 cm and firmly fix them in the machine or in any convenient way. We lay knitting needles or wire in the extreme racks to make it more convenient to form even and neat contours of the product. We begin to braid the base with a working tube using the “rope” technique or chintz weaving. We monitor the parallelism of the rows and, if necessary, coat them with glue for better fixation.

Weave a rectangular blank of the required length. We take out the knitting needles or wire. The ends of the stands are neatly trimmed and trimmed. We give the workpiece the necessary curved shape, if necessary, wetting it a little with water.

Similarly, weave the leg of the stand on a smaller number of tubes. We bend the finished leg, install it on the main part and fix its racks between the rows of the stand. Cut off the excess and hide it. We coat the product with glue, if desired, additionally paint and cover with 1-2 layers of varnish. After complete drying, the stand can be used for its intended purpose.

Stand made of origami modules.

Modular origami is a fairly young, but very popular type of needlework. With it, you can make a lot of unusual and original gizmos, including a phone stand from modules.

To make the stand, you will need double-sided blue and pink paper. We cut the sheets into blanks and fold the modules.

We start weaving from the base of the stand. For it, you will need 28 blue modules, which must be connected to each other and closed in a ring. We make three more rows in the same way. From the fifth row, we reduce the number of modules by 1, 2, 3, 4 pieces. In the seventh row we put one pink module in the middle.

In the eighth row we put 6 modules, make a pass, another 10 modules, a pass, 6 modules. The number of pink modules is 2 pieces. In the next row, we put three pink modules on the pink section. We begin to make out the curly edging of the stand, as shown in the photo below.

In the back, we form a pattern in the form of a heart, above which we install a row of blue modules. Gradually narrow the stand until a triangular wedge forms in its back.

Stand of modules is ready!

Video on the topic of the article

We suggest watching the video tutorials below on making other options for phone stands.