How to clean a door from greasy stains. How to wash doors

Beauty and comfort both indoors and outdoors depends not only on the interior, but also on the cleanliness of the doors. Every housewife should know how to clean the door correctly.

What to pay attention to

Doors are different: interior, entrance, made of various materials, so it is worth paying attention to the following main points:

If the door is made in the form of a monolithic structure, then dust and dirt on it are less noticeable. If there are decorative elements in the form of glass, metal or plastic inserts, then the problem of dirt becomes noticeable not only upon close examination.
The color of the door is also important, as on light surfaces, fingerprints and other stains are more noticeable than on a dark canvas, and they have to be washed more often.
Eco-veneer products are less practical, since any dirt on them is very noticeable.

In order not to spend a lot of time cleaning the doors, it is important to provide them with proper care:

Not only the door itself needs care, but also the accessories. They need to be cleaned periodically in order for the mechanism to last long enough. If you hear a squeak, you need to lubricate the fittings.
If the door is made of natural solid wood, then first of all it is necessary to provide a comfortable indoor climate so that the door does not lose its attractiveness and function properly. The maximum temperature in the room is considered to be 25 degrees, the air humidity should not rise above 70%.
It is necessary to carefully operate the doors, since scratches, dents and other troubles cannot be hidden.
If you find dirt and stains of fresh origin on the door, then you should not be lazy, it is enough to immediately eliminate the trouble so that later you do not have to deal with the ingrained pollution using various means.
If you are starting a renovation, be sure to cover the interior and exterior doors with polyethylene. This measure will allow you to get rid of unnecessary work.

Among the materials used for the manufacture of doors, the following are popular: PVC, eco-veneer, laminated options, natural veneer, solid wood. Every material needs proper washing.

The detergent is selected depending on the base material of the product. Today, you can buy universal detergents for various surfaces.

Wash wooden doors

Products made from natural wood can react negatively to prolonged and abundant exposure to moisture, therefore it is recommended to use the dry cleaning method or wipe them with a damp cloth.

To clean a wooden door, you need to follow a series of simple steps:

Pour the required amount of warm water into the prepared dishes, add detergent to it. You can use shampoo or dish soap.
Be sure to wear rubber gloves to avoid damaging your hands.
With a damp cloth, wipe the surface of the product on both sides.
Rinse with clean water, wipe the product with a napkin.
Allow to dry and apply polish. This measure will protect the product from contamination.
Wipe the handles thoroughly to avoid greasy stains.

If there are stains on the door, you can remove them with ordinary talcum powder. Put a small amount of the product on the problem area, leave in this position for 20-30 minutes, then remove with a soft brush.

This washing method is also suitable for products made of natural veneer.

How to clean a laminated door

Even a beginner will be able to wash the laminated surface, since the material is resistant to moisture and detergents. You can use dishwashing gel, alcohol and water are allowed. It is important to avoid the use of hard sponges.

Pour warm water into a basin or bucket, take a soft, lint-free cloth and start removing dirt. It is important to brush the fittings with a brush.
Rinse the product, then dry thoroughly with a towel or special napkin.
After processing with a polishing compound.

How to clean a metal door

Metal doors are commonly used as entrance structures. These doors have to be washed less often than interior doors, as they are less likely to get dirty.

To clean a metal door, just follow these simple guidelines:

Pour warm water into a convenient dish.
Add detergent. It must be liquid, as abrasive particles will damage the surface. You can use a classic soap solution.
Using a sponge or napkin, thoroughly rinse the door and fittings, rinse and wipe dry.
Do not use coarse brushes.

How to clean a glass door

When cleaning tempered glass doors, follow these tips:

If the product contains complex contamination, it is recommended to use alcohol, acetone or nail polish remover to remove them.
You can clean the frosted glass with a soft brush.
Dishwashing liquid will help get rid of stains on frosted glass.
A microfiber cloth is the ideal choice for cleaning cloths, as it does not leave streaks and does not damage the surface of the products.
To keep the door clean for as long as possible, it is recommended to regularly wipe the handles.
For impeccable maintenance, we recommend the use of a door handle disinfectant.

Sequencing:

Take water at room temperature into the prepared dishes, you can drop a little ammonia into it.
Carefully treat the surface with a soft cloth.
Rinse it with clean water, wipe dry.
If there are metal elements on the glass door, then they must be washed with a soapy solution.

Door cleaning- the ability to maintain an attractive appearance and the integrity of the coating for a long time. In this case, care must be regular and correct. Doors, like any other household item, need cleaning. For this purpose, suitable cleaning agents are specially selected depending on the material of the door surface, its color and some other parameters. Let's figure out how to properly care for the interior and exterior doors.

adjust the doors before washing;
lubricate locks and hinges with a special tool;
make sure that the room has a humidity of up to 65% and a temperature of up to 24 degrees;
remove any fresh stains from the door surface as quickly as possible, without delay;
cover the door structure with varnish, especially if it is a low-quality canvas;
close the doors with foil if renovation work is planned;
In general, you need to use the door very carefully so that you do not have to try to repair serious dents or deep scratches.

The correct cleaning agent must be selected... In particular, veneer and natural wood are cleaned completely differently. If you do not take this into account, there is the possibility of hopelessly ruining the door covering. In addition, it is recommended to take into account the following tricks:

with cool water with a few drops of ammonia, wash the glass in the decorative stakes in the door;
use soapy water to clean metal door elements;
wipe the doors with soft cloths only;
get special microfiber wipes for cleaning doors;
once every 3-4 days, wipe the decorative elements, handles and inserts of the structure from dust;
use a disinfectant (a weak solution is sufficient).

The main reasons that lead to the fact that the door covering loses its aesthetics are insufficient or improper care, careless handling of the door.

Important! Sprays, aerosols and specially designed products are perfect for cleaning the door. They are applied to the door covering through a spray bottle, allowing any dirt to be washed off.

Fight fat

Fighting grease on wooden doors is a must, especially if they are located in the kitchen opening. The easiest way is to use folk remedies that are effective and safe to use. You can give preference to the following methods:

Use a water / surfactant solution or dishwashing detergent to remove stains. The method is effective for wood and MDF doors.
Use a raw potato cut for quick removal of grease or stains. Finally, wipe the area with a slightly damp cloth.
Mix equal proportions of clay and vinegar. You should get a mixture that resembles a gruel. It is applied to the stain and allowed to wait for 20-30 minutes. After that, it just remains to be washed off. This method effectively fights all types of stains, including greasy marks. For the most serious dirt, you can repeat the cleaning procedure 2-3 times. The method is suitable for cleaning unpainted wooden doors.
Sprinkle talcum powder on a napkin and press on the stain on the door for 5-10 minutes (you can use scotch tape). After this time, wipe off talcum powder from the surface of the door and wipe the surface with a dry cloth.

To restore the glossy shine of the surface, you need to wash the door with a solution of water and vinegar (1 tablespoon of the product is enough per liter of water).

Remember that all solutions must be rinsed off the door surface with cool water. Finally, the door leaf is thoroughly wiped dry. The use of metal brushes, hard sponges and products containing abrasive substances is unacceptable.

It is important! By the way, getting rid of dust is very simple. To do this, it is enough to wipe the door leaf with a dry and damp (but not wet) cloth. Finally, it needs to be polished using a door polish.

Glass cleaning

Cleaning glass is not an easy task. It always seems that you can easily wipe the glass insert on the door, and it will shine clean. In fact, there are always divorces, which are a real problem to eliminate.

Onion juice or soapy water can help remove grease stains.
The matt surface can be washed with a starch solution (you need to add 20 grams of starch to 500 ml of water).
Alcohol, thinner, acetone, and even nail polish remover can quickly remove any traces of glue, coffee and tea. However, you need to act carefully so that the funds do not come into contact with the box, rubber seals, and the skin of the hands.

You do not need to use alkalis, acids, gasoline and ammonia in a concentrated form to clean frosted glass. Scraping off dirt with a knife or scraper is taboo.

It is important! First you need to clean the glass inserts of the interior door, and then the door leaf.

Tips for caring for your iron front door to help keep it clean:

a napkin dipped in hot water will get rid of traces of scotch tape;
acetone-containing liquids will help get rid of old scotch tape residues;
white spirit or other solvent will help remove traces of paint;
sandpaper will help get rid of traces of lime and whitewash (you cannot use this method to clean vinyl or leather-coated iron doors);
vinegar solution will help to cope with stains and traces of whitewash;
a solution of water and kerosene will help remove plaque;
products that contain acetone or alcohol will help get rid of polyurethane foam that has not hardened.

How to clean plastic?

How to clean plastic? It’s very simple. It is enough to use soapy water. You can give preference to the other above-mentioned compositions, but in most cases there is no need for this, since all contaminants are easily wiped off.

You can also use vinegar, liquid detergent, and baking soda. Effective for cleaning special sprays and cleaning agents for plastic surfaces.

It is important to take into account that plastic cannot be rubbed, washed with metal sponges, or rubbed with a brush. This leads to its damage, the appearance of microcracks, into which dirt is subsequently clogged.

What about defects?

Defects that may appear on the door during use can also be fought. In particular, it is recommended to heed the following advice:

Use beeswax sprays and polish to get rid of small cracks and other subtle blemishes.
Use a special wax crayon of the correct color to remove deep scratches. It is enough to rub the damaged area to fill the void of the crack.

Caring for doors is a feasible task for everyone. The procedure is not complicated and does not require serious economic costs. Regular maintenance is an opportunity to extend the service life of the door surface, to take care of its aesthetics.

Interior and entrance doors are often stained with grease. Moreover, depending on the surface, there are very, very many ways to remove such spots. In this article, we will try to consider the most popular of them, depending on the type of material of the door leaf or platband.

Since we usually touch doors with our hands, fat is often transferred from the surface of the skin to the surface of the door. And for this, the hands themselves do not have to be greasy, since our skin secretes fat on its own. At first glance, such traces may not even be visible, but over time, fat creates real dirty spots, as dust actively settles on it. Also, greasy stains can be from the door contact with various liquids, both biological and chemical.

Removing greasy stains from a metal front door

The metal is extremely unpretentious and you can clean it of fat using white spirit or acetone. There are no problems with the purchase of both, but what to choose? Practice shows that white spirit is nevertheless acquired more often due to the absence of a sharp characteristic smell, which is very familiar to all of us from acetone. Various abrasive cleaning powders are also excellent methods.

Removing greasy stains from laminated doors

At the heart of a laminated door is chipboard, or even plastic, which are covered with a paper layer with a pattern, on top of which the film is located. The latter is not as strong as metal, so treatment with alcohol, vinegar or citric acid would be the ideal solution in this case. All that needs to be done is to wipe the stained surface with a napkin soaked in the above liquid, then wait a couple of minutes and wipe everything off with a wet rag. It is best not to delay with this, as leaving such components on the laminated surface for more than five minutes, you risk causing damage to the coating.

Removing oil stains from veneer and unpainted wood doors

It is worth remembering that veneer is essentially a thin cut of natural wood. Therefore, it is better to remove greasy spots from it as soon as they appear. In this case, microfiber is perfect, as it is excellent at absorbing fats. It is clear that we cannot immediately find out that a greasy stain has formed on a particular surface, so wiping the most endangered areas once a week will be an excellent prevention.

But, as a rule, already old fat has to be washed, in which case two options are suitable:

Plain clay is mixed with table vinegar until a homogeneous mass is formed. Then it is applied to the veneered surface and remains to dry. Completely dried clay is wiped off the veneer along with the grease;
Soda and vegetable oil are taken in proportions of 2 to 1. The solution is applied with a soft toothbrush to the surface of the veneer, after which it is washed off with a cloth soaked in moist water.

All of the above is also true for unpainted natural wood doors.

Wash grease off painted doors

If the stain is fresh, it is best to remove it with a mixture of water and dishwashing detergent. Stubborn stains are usually removed with vinegar. It is necessary to let the latter soak in, then wipe with the same detergent. To avoid leaving marks, it is best to work with a cotton or soft cloth.

How to remove grease stains from a polished surface

If your polished interior door is covered with greasy stains, then potatoes or talcum powder can come to the rescue. With the latter, we simply process the door for 20 minutes. As for the potatoes, in this case, the tuber is cut into two parts and the cut is rubbed for the same time period.

By removing talcum powder, we can detect stains at the place of work. In this case, the ideal solution would be flour, with which we will carry out additional polishing using a rag soaked in vegetable oil.

The lacquered surface is the biggest problem

Removing greasy stains from a varnished door just won't work. Old stains are deeply absorbed into the structure of the varnish, and they can only be removed together with the removal of the old varnish layer and covering with a new one. To do this, we do a few things:

Removing the door from the hinges and removing all handles and other fittings;
Covering the old varnish with a layer of remover. A layer of polyethylene is placed on top, after which the impromptu compress remains for several hours until the varnish under it turns brown;
The softened varnish is removed with sandpaper or a spatula;
The remnants of the wash are washed off with water and vinegar;
After the door has dried, it is re-varnished. Up to three coats can be applied in total.

An alternative to this method of removing varnish is mechanical, when the coating is simply wiped off the door leaf with sandpaper. This method is very laborious and time-consuming.

As you can see, in the case of lacquered doors, which quite often separate rooms in our apartments, grease stains are a very serious problem and it is better to remove them as quickly as possible.

Removing fat from glass doors

Glass doors are often used in our apartments. And on their smooth surface, greasy spots remain especially often and stand out quite strongly. In the event that this is ordinary glass, then there should be no problem. It is enough just to wipe it with a damp or soaked in alcohol with a soft cloth (so as not to leave scratches) and everything will pass. Sandblasted frosted glass is a different matter, however, and removing grease from it is much more difficult. In this case, several methods are usually used:

Soap and ammonia-based products;
Baking soda, with which we will scrub the grease stains with a soft sponge;
Alcohol or glass cleaner containing alcohol;
Ammonia mixed with water in a ratio of 1 to 10.

Today, the most popular material in the production of doors is MDF, or finely dispersed fraction. In simpler terms, a small-sized wood chip board. If such material becomes greasy, methods of effective removal will differ depending on the type of outer coating. Find out how to remove greasy stains from MDF doors, what folk remedies are suitable for a specific door covering, what brands of household chemicals are currently on the market for this purpose. To begin with, you should arm yourself with knowledge about the types of external MDF coating.

Materials used for MDF door cladding

There are only five types of them - natural veneer, eco-veneer, polyvinyl chloride film, laminate and enamel paint. The first two types are a thin layer of wood that retains its texture. They are the most expensive types of door coverings, and are, in fact, natural wood that requires proper care.

Polyvinyl chloride (PVC) film is one of the cheapest types of cladding. Its feature is increased moisture resistance, which should be taken into account when cleaning. It comes in different colors, including patterns.

Laminated doors are similar to PVC cladding. The difference is the production technology - the laminate consists of two layers. The bottom one is printed paper, and the next top one is a film that protects the base. This type of coating can be cleaned with household solvents without fear of damaging its structure.

Enamelled doors are widely used in the furniture market. High-strength paint is distinguished by a variety of colors, and the technology of application in several layers. As a rule, in addition to this, the cladding is covered with a protective varnish. This structure allows painted doors to be cleaned by almost any means. Let's consider how to remove stains from doors of different types of cladding.

How to remove greasy stains from veneered doors

Since veneer is a natural layer of wood, no abrasive materials or aggressive chemicals can be used. From household chemicals, you can use the brands "Shumanit", "Domestos" or "Silit". Apply them to a soft cloth and gently wipe the greasy surface.

There is an effective folk remedy for removing greasy stains from doors. It consists of using regular potatoes and talcum powder. If the latter is not available, you can use baby powder. The potato is cut into two halves. The incision should be carefully wiped off the areas with fat. Wait ten to fifteen minutes until the potato juice dries. And then remove the dirt along with the starch with a dry cloth. The resulting white stains can be easily removed with talcum powder or baby powder.

As a tip: it makes sense to cover newly purchased MDF veneered doors with a polish that will prevent the formation of grease and dirt.

How to clean grease from PVC coated MDF doors

Polyvinyl chloride film is perfectly cleaned with folk remedies. Let's look at three recipes. An effective solution is a mixture of liquid soap and plumbing cleaner, which are mixed in equal parts. Then the resulting liquid is applied with a soft sponge to the contaminated areas, and left for ten to twelve minutes. After that, she is wiped off with a dry soft cloth.

Another popular recipe for removing greasy stains from the door is a mixture of baking soda and sunflower oil. You need to take both substances in the amount of three teaspoons, and mix well until a gruel is formed. She will clean the door covering. How is this method effective? Sunflower oil forms a protective film on the door, and baking soda, being a light abrasive, will clean out oily droplets.

The third popular method will tell you how to wash doors from greasy stains using a baking powder. You need to take four to five teaspoons of baking powder and pour warm water over them. The resulting solution is applied to the dirty areas with a damp and soft cloth, and then left for about ten to fifteen minutes.

See the next section for how to remove greasy stains from laminate doors using laundry soap and alcohol.

How to remove grease and dirt from laminated doors

An alcohol solution is made from a ratio of one part alcohol to nine parts water. A napkin is wetted in it, fixed on a dirty area for five minutes. Then this place is wiped with a dry soft cloth.

How to remove greasy stains from doors, if not with the help of laundry soap? Fifty to sixty grams of it should be grated into shavings, which are filled with warm water. The soapy fat content should be seventy-two percent. The resulting slurry is applied to contaminated areas. This method is simple and effective. However, all manipulations must be carried out quickly in order to avoid moisture absorption into the laminated surface.

Door laminate can be cleaned well with household products. For example, you can use the Pronto tool. This furniture polish effectively removes all types of dirt and stains. A melamine sponge is also great for cleaning. It needs to be wetted, wrung out, and simply wiped off the contaminated areas.

How to remove greasy stains from doors so that they cannot be seen? Modern stores offer sets of special pencils and pastes for this purpose. They are able to hide any type of dirt on the laminated surface.

Advice: Do not use any abrasives to maintain the laminate flooring, as they can damage the door cladding.

How to clean grease from enamelled doors

As a rule, all MDF interior doors, painted with enamel, are covered with a protective varnish layer. Therefore, the use of abrasives for cleaning is questionable. It is better to use safer folk methods.

How to clean the door from greasy stains using ordinary lemon? Very simple. It should be cut in half, rubbed with one half on the soiled areas, and wait ten to fifteen minutes. And then rinse off with warm water.

Another solution for removing greasy stains from doors is a mixture of dishwashing liquid and citric acid in the amount of fifteen grams. It is additionally diluted with warm water in the volume of a teaspoon, stirred and applied to dirty places.

For cleansing, you can use baking soda, which dissolves in a mouthwash. The mixing proportions are chosen the same. Such a mixture removes greasy stains on doors well, but you should know how to remove them effectively and with what materials. It is better to use napkins for this purpose, both for wiping and for subsequent cleaning of the door from the solution.

Not everyone installs MDF doors at home. Some also buy natural wood. How to clean a wooden door from greasy stains - the next section of the article is devoted to this issue.

How to clean grease from natural wood doors

For maintenance, use only non-abrasive cleaning agents. It is strictly forbidden to use soap solutions and washing powders, as they contain alkali. Do not rub wooden surfaces with abrasive sponges. Maintenance methods will differ depending on the type of wood.

How to clean wood doors made of mahogany and other valuable woods from greasy stains - the use of burdock oil, vinegar or wax will help in this matter. They should be diluted in warm turpentine and wipe the wooden surface with this solution using a soft cloth.

How to clean greasy stains on a wooden oak door? Oak furniture is perfectly cleaned with a mixture of twenty grams of wax, one glass of beer and one teaspoon of sugar. It is brought to a boil, cooled, and then applied to the contaminated areas with a cotton swab. After drying, wipe with a soft cloth.

How to clean greasy stains from walnut wooden doors? Grease and dirt can be easily removed with a mixture of olive oil and dry red wine in equal proportions.

But no matter what material the door is, it is important to remember some principles of purification.

The nuances of cleaning greasy dirt from doors

When caring for door coverings, it will be useful to observe the following few rules and tricks:

before washing off greasy stains on the door, examine its coating, read the manufacturer's recommendations for cleaning it;
Whenever using a new cleaning agent, apply it first to an inconspicuous area;
if you suddenly bought a low-quality MDF door, and it does not get cleaned of greasy stains in any way, do not rush to get rid of it - use a self-adhesive film to hide traces of dirt;
it is better not to use cleaners with harsh abrasive properties and metal sponges, which can severely damage any door surface;
for cleaning the applied solutions, it is better to use soft, slightly damp cloths, or napkins;
before washing wooden doors from greasy stains, always take into account the peculiarities of the coating, and in some cases it is better to refuse to use solvents.

In conclusion, we can say that cleaning doors from dirt and grease is actually very simple and does not require significant time spending. The main thing is to do it regularly and according to the proposed methods. Now you know how to remove greasy stains from MDF doors. And if the tree is natural, then the use of various oils for care can not only clean it, but also improve its appearance.

Ways to clean interior and exterior doors.

The front door is the face of the mistress of the house. Very often, the state of the door can be used to judge the welfare of the family. After all, the more reliable the door, the higher the likelihood that there is something to hide behind it. Due to constant use, the gates often get dirty, so you need to know how you can clean them.

From a metal door, everything is simply washed off. Abrasives can be used, but there is a risk of scratching.

Stain removers:

Mister Muscle. The tool must be purchased universal. It is applied with a spray gun and removed with a cloth.
Dishwashing liquid. Just moisten the sponge and apply a little of the product. Rub the door and wash off any foam with a damp cloth.
Silith. The same tool is sold in a spray bottle. Apply to the door and simply wipe it down with a cloth.

A wooden door, unlike a metal one, can get wet. In addition, the coating is often not very durable and can deteriorate under the influence of moisture and corrosive substances. That is why dirt is wiped off with a damp cloth. If these are fingerprints, then the ideal option for removing such contamination is polish. This polish Pronto, Laska, Sana.

In this case, it is best to use a glass cleaner. They contain ammonia and alcohol in their composition. This dissolves grease and removes stains.

Review of funds:

Mister Muscle
Blink

Most often, these doors are made of wood or plastic. In these cases, strong solvents must not be used until the stain is removed. Sparing agents are usually used.

Ways to remove stains and products:

Vinegar and soda. It is necessary to dissolve 20 g of baking soda and 15 g of washing powder in 1000 ml of warm water. Next, 50 ml of vinegar is introduced. The sponge is moistened in the solution and contamination is removed.
Lemon acid. Dissolve a spoonful of dishwashing liquid and 20 g of citric acid in 500 ml of warm water. Flush the doors with fluid.
Ammonia. Dissolve 10 ml of the product in 500 ml of water and rinse the contaminated surface with liquid.

The varnish can be easily damaged. That is why you should not use solvents and abrasive powders to remove stains. All this will ruin the coating. It is better to wipe the door with a polish. Apply a little of the product to the cloth and wipe the surface.

If these are fingerprints, then you can remove them from the plastic using ammonia. A glass cleaner with ammonia is also suitable.

The options are:

Domestos
Silith
Dishwashing liquid
Baking soda solution

The point is not to wash out the remaining urine, but to dissolve it. Otherwise, the cat will still mark territory.

Cleaning agents:

Lemon. Dilute lemon juice with water in a 1: 1 ratio and wipe the door with liquid. Before doing this, wash everything with soap.
Vinegar. First wash the stain off with soapy water and then with a 1: 1 vinegar solution.
Iodine. Dissolve 3 drops of iodine in a glass of water and wipe the cat's marks with it.

There are several options to wash the whitewash. You can use the Mister Proper tool, which does not leave streaks. But alternative methods are cheaper.

An overview of alternative methods for removing whitewash:

Vegetable oil. Dissolve 50 liters of vegetable oil in a bucket of warm water and wash the floor with liquid.
Vinegar. Pour 20 ml of vinegar into a bucket of water and wash the floor with liquid.

After drying, the primer eats into the surface. That is why it is possible to use not abrasive substances, but solvents. You can apply a fresh primer and try to wipe the wet spot with a dry cloth. After that, the surface is rinsed with water.

Ways to wash the primer:

Ammonia
Glass cleaner
Vinegar solution

This is a rather relevant question, since dust adheres to the glue and dark spots appear.

Ways to remove tape stains:

Vegetable oil. It is necessary to saturate the fabric with it and leave it for several hours. After that, the doors are rinsed with warm water.
Hair dryer. It is necessary to heat the remaining glue with hot air and wipe it off with a napkin.
Eraser. Oddly enough, you can remove the tape with a regular eraser that wipes off the pencil.

It is quite difficult to clean off such contamination. Remove foam as close to the surface as possible with a scraper. Next, apply kerosene or white alcohol to the stain and wipe with a cloth. You can also use the hard side of the sponge.

You will have to use a solvent to remove the oil paint. Vegetable oil, white alcohol or kerosene copes well with pollution. Saturate a cloth with one of these liquids and wipe the doors. If it is a water-based emulsion, then you can remove paint residues with warm soapy water with the addition of ammonia.

No matter how scary the stains may seem, you can almost always wash them off, knowing some tricks.