The question is how to close the pipes in the toilet, the owners of real estate are interested even at the stage of planning the renovation. People want any room in their apartment to be not only functional, but also beautiful. Modern technologies for cladding various surfaces provide an extensive selection of ways with which you can beautifully and practically hide vertical and horizontal lines intended for drainage. There are many options for how to close the pipes in the toilet using various materials and technologies.

There are 50 mm pipes along the back wall of the bathroom, through which drains from the bathroom or kitchen are discharged. Even modern aesthetic plastic products will not decorate a room that shines with a new finish. They can be hidden in various ways, depending on the structural features and the layout of the building.

You can use the following options for masking horizontal communications:

1. Place them in a niche in the stove. If there is no such niche, then you can do it yourself using a grinder and a punch. First, you need to clarify the thickness of the floor slab. If it is too thin, then the longitudinal niche can weaken its load-bearing capacity. After laying the sewerage, the strobe is filled with starting or finishing putty.
2. Cover communications with tiles. Depending on the design, the finish used to cover the floor or the one planned for the walls. In order to facilitate the subsequent replacement of pipes, it is not recommended to fill them completely with cement mortar.

It is necessary to close the drains in such a way that they can be quickly reached in the event of an emergency or for repairs.

Methods for closing the sewer riser

Pondering, how to close a sewer pipe in a toilet, you need to take into account a number of nuances.

You need to take into account that this is a public building. On each floor, risers are equipped with inspection hatches to eliminate blockages. These hatches must be accessible to public utilities at any time.

There is a water supply next to the riser. It is equipped with shut-off valves and meters that must be open to take readings. They cannot be sealed tightly.

If the sewage system is to be replaced in the near future, then it makes no sense to build a capital structure to mask the risers. You can use a lightweight temporary structure or a removable fixture that does not need to be destroyed during repairs.

It is worth considering options for closing the riser, which have been tested by time and have earned positive feedback from the masters and their clients.

Sheathing of the riser with plasterboard

The simplest, but not the fastest, way to camouflage a toilet riser is to make a drywall box. This material is widely used today in all areas of construction and repair.

Cover the pipes in the toilet with drywall maybe even a novice craftsman, using the minimum set of household tools that is in every apartment.

To work you will need:

• puncher;
• scissors for metal;
• roulette;
• screwdriver;
• level;
• hammer;
• thin knife;
• serpyanka mesh;
• putty;
• primer.

It is necessary to equip the plasterboard box only when the floor and walls are finished. For the construction of the frame, it is better to use a metal profile, since a wooden beam can deform over time.

The plating of the sewer riser is carried out in the following sequence:

1. Floor and wall markings. Drilling holes for attaching the guide rail.
2. Assembling the frame. The sequence of this event, regardless of the configuration of the box, is one - the installation of vertical racks and their connection with jumpers from the bearing profiles.
3. Sheathing of the frame with plasterboard. Blanks are made by notching along the marking line. After that, the desired fragment is broken off. The workpieces are screwed in with a screwdriver and self-tapping screws. The edges of the drywall strips should be fastened to the profiles at intervals of 10-15 cm.
4. GKL box putty. When the mortar is dry, it is treated with a deep penetration primer. If the box is being prepared for painting, then its surfaces are polished.
5. Arrangement of doors or inspection hatches. The door is made in the place where the inspection hole is located. Instead of it, you can equip the plug by using a ventilation grill. It is better to close the meter and ball valve with a light door made of plastic.

The manufactured box can be faced with ceramic tiles, painted and pasted over with wallpaper. The disadvantage of this choice is that if it is necessary to replace the pipes, the structure will have to be broken without the possibility of restoration.

Closing the sewer riser with plastic

Cover the pipes in the toilet with plastic panels it is possible using a frame or connecting strips directly to the walls and to each other. The advantage of choosing this material is the ease of processing and installation, the ability to quickly dismantle when a production need arises. Another advantage of using plastic panels is the complete absence of wet works and debris during the installation process. A certain disadvantage is the difficulty in choosing the right color and shade of plastic, so that it is combined with the wall decoration of the toilet.

Consider the options for manufacturing a frame and frameless box:

The frame version is used in cases where the internal volume of the toilet is sufficient for the construction of spatial structures. In order to make a frame for PVC panels, you can use a steel profile or profile. Since plastic is a flexible material, it is not affected by changes in the shape of the tree from moisture or drying out. Therefore, you can choose the material for the frame based on your preferences and existing experience.

To make a plastic box you will need:

• puncher;
• level;
• roulette;
• screwdriver;
• stationery knife;
• marker;
• wooden beams or steel profiles;
• plastic profiles (starting, external and internal corner).

Do not use brackets to attach panels to the frame. In a humid environment, the metal is destroyed in 2-3 years. It is better to use self-tapping screws equipped at the ends with drills for screwing in.

The work is carried out in the following sequence:

1. A drawing of the box is drawn up. The calculation of building materials is carried out.
2. Markings are applied to walls, floors and ceilings. Holes are drilled into which plastic dowels are inserted.
3. The side posts of the frame are attached to the walls. If the riser is in the corner, then the center post is attached. It is fixed to the ceiling and floor slabs using metal corners.


4. A starting plastic profile is attached to the frame with self-tapping screws. Depending on the project, decorative skirting boards can be used.
5. Adjustment of the plastic panels in length and width is carried out. It is best to cut them with a sharp clerical knife. It should be cut 3-4 mm more from the obtained distance based on the thickness of the profile walls.
6. The panels are installed in the cavity of the plastic profiles. When assembling the corner structure, the edges of the panels are screwed to the central support and closed with a polymer or MDF corner. You can make a non-rigid mount in the outer corner.

The made box is beautiful and looks neat. It can be easily and quickly disassembled for service or repair.

The frameless method of masking the riser is used when working in very tight spaces, in which the sewer is located in one of the corners. As a rule, it is not possible to attach supports for the frame due to the toilet cistern. In this case, the starter profiles are screwed directly to the tile. The panels are inserted into the contour formed by them and fixed at the junction with brackets or long self-tapping screws. The joint is glued with a corner made of plastic or MDF. The design has sufficient strength and reliability.

Covering up the riser with blinds and roller shutters

The use of roller shutters, horizontal and roller blinds, allows you to solve the problem of masking the sewer riser and water supply quickly, beautifully and effectively.

The advantages of this solution are obvious:

• high speed of work execution;
• significant space savings;
• the ability to obtain full or partial access to communications;
• beauty and lightness of design;
• relatively low installation cost.

A certain disadvantage of blinds is that they darken over time and have insufficient strength (especially steel). This problem can be solved by installing plastic structures that are durable, fade and corrosion resistant.

It should be remembered that roller shutters and blinds do not provide complete insulation. They cannot be used as a partition between the toilet and a common shaft through which plumbing communications pass.

In order for the blinds to look presentable, you need to make a box through which the pipes will pass. It is advisable to install taps and meters there. The free space can be used to install shelves where you can store household chemicals, tools and fishing accessories. Roll shutters will look much more presentable, as their design provides for rigid fixation, not only from above, but also from the sides. Accordingly, the service life of such a device will be much longer than that of conventional window blinds.

29781 3 2

The back wall in the toilet: finishing rules

This article is about how you can decorate the back wall in a toilet or a combined bathroom. In it, I will give several options for finishing and using the wall, and also share my thoughts on when it is possible to hide the risers of water supply and sewerage, and when it is completely contraindicated.

General information

For Soviet-built houses, the most typical layout is a toilet with water supply and sewerage risers located at the back wall. Steel pipes rust over time, even with regular painting, perennial layers of paint represent a dubious decoration of the bathroom.

Time does not treat a cast-iron sewer pipe so mercilessly, however, after 20 - 40 years of service, it rarely shines with beauty. In such conditions, the temptation to hide the risers is understandable by building a light partition between them and the toilet.

Partition? Dismiss

What is this instruction related to? There are several reasons.

Solid baffle means complete lack of ventilation... Without it, condensation will form on the cold water riser (water vapor perfectly penetrates through drywall and aerated concrete, which are usually used to create a partition). Constant contact with moisture will greatly reduce the service life of the steel pipe.

Moreover, it is unlikely that your neighbors from below will be pleased with a damp spot that has appeared on the ceiling and the plaster that has begun to peel off.

In addition, the partition will have to be dismantled when need for access to risers.

There are many reasons for this:

• Steel pipes periodically leak - along the seam of an electric-welded pipe, in a thin section of a welded joint, or simply in the place where the pipe was exposed to moisture for the longest time;
• There is such a thing as the planned replacement of risers and water supply pipes. Sooner or later, friendly plumbers will come to you and, when they see, they will be upset and say a lot of hurtful words about the unlucky builder;
• Sewer sockets are often destroyed under the weight of the pipe resting on them. This requires replacement of the riser section or at least the installation of a bandage;
• Sinking of the bell in the ceiling can also lead to a leak in the sewer riser. What is especially unpleasant, this leak occurs periodically, when the riser overflows with simultaneous drainage in a pair of toilet bowls or foam generated during washing. Repair work in this case will require access to the riser;
• With some blockages, the only way to clean it is to open the riser and remove the stuck object from it with your own hands;
• Finally, on the outermost floors (and in high-rise buildings - every three floors), revisions for cleaning are installed on the sewer riser. They (as, in fact, and risers) relate to the common property of the residents of the house, and free access to them is necessary.

Sometimes you can still

Is it really the only decoration that an apartment owner can afford is a toilet curtain on the back wall?

Comrades, not everything is so bleak. Risers that are hateful to you can still be hidden. But with a few very serious caveats:

1. Corrosion-resistant steel pipes must be replaced with overheating and water hammer resistant material with maintenance-free joints... In houses with centralized hot water supply, only corrugated stainless steel and copper pipes on solder fittings can be used for this purpose. In buildings with boilers, polypropylene and metal-plastic can be added to the list of club members;
2. The uprights should not be replaced from floor to floor, but at least from the toilet above your to the downstairs neighbor's toilet... Steel pipes rust the fastest in the ceiling;
3. Cast iron sewer riser is changed to plastic, moreover, all sockets must be fixed with clamps in order to avoid spontaneous undocking;
4. If there is a revision opposite it, it is mounted in the partition Luke... Its dimensions should provide free access to the revision cover;

1. At the bottom and at the top, the partition is supplied with a pair ventilation grilles.

Design options

Apartment

So how to make a back wall in a panel toilet in an apartment building? Here are some ideas.

The partition consists entirely of inspection hatches for tiles (Euro doors). They provide access to the risers along their entire height. In the closed position, the doors are absolutely invisible and do not differ in any way from the main wall covered with tiles.

The space around the risers is used to store washing powder, cleaning products and other household chemicals. High doors and removable shelves allow full access to the risers if required.

Another locker is from the lining.

A variation on the same theme. The front wall of the cabinet is assembled from lining and covered with furniture varnish. Ventilation is provided by the gaps between the wall and the door.

This idea can only be approved. Plastic is more appropriate in a room with high humidity: it does not swell and is easy to clean.

Instead of a door - blinds.

If for some reason you don't like the idea of ​​cabinet doors behind the toilet - no problem: hang blinds instead. They will hide the pipes without obstructing their ventilation.

Private house

How to make a back wall in a private house toilet?

Nothing hinders our imagination here: the sewerage system and water supply lines can simply be taken out to the next technical room or to the basement.

When installing a water supply system from scratch, you can immediately use materials that do not require maintenance of fitting connections. In this case, the water supply and sewerage system can be hidden behind a non-separable partition.

I will share with you the design of the back walls in the toilets of my house.

In the photo - a toilet on the attic floor.

An attic with a sloping roof allowed me to use the space between the vertical wall of the toilet and the sloping roof to create a pair of plasterboard niches. Shelves are covered with tiles. Niches are used to store toilet paper and notorious household chemicals. The drywall is painted with a "rubber" waterproofing, making it splash resistant.

The wall is tiled. The sewerage system is assembled with sealant and sealed in a box. It also has a polypropylene water supply line removed.

Conclusion

I hope that my recommendations will help the dear reader in decorating his own home. As always, the video in this article will provide you with additional thematic information. Feel free to share your own experience in the comments. Good luck, comrades!

Noticeable communications in the bathroom do not add attractiveness to the room. How to close the pipes in the toilet? We offer you several fairly simple and reliable options for ennobling a room without compromising its functionality.

We have already looked at how you can. The same methods will work for the toilet. Let's remember them.

Plastic panels or drywall

The fastest way to close the communications in the toilet is with the help of plastic panels. They fit regardless of wall, floor and ceiling finishes. The main thing is to choose the color and pattern.

The advantages of this material:

• environmental friendliness;
• easy installation;
• quick installation;
• low cost;
• the ability to install a door to access meters or spikes where breakouts are possible;
• the ability to install a collapsible structure;
• no additional finishing required.

The second convenient option for a material for a structure with which pipes will be masked is drywall. A toilet is not a bathroom, but it is still better to use a moisture resistant one. Advantages:

• environmental friendliness;
• easy installation;
• low cost;
• the ability to mount a collapsible structure;
• the ability to install a door to access communications.

The only drawback of drywall is the need for finishing it. But, on the other hand, you can make it the same as the rest of the walls in the toilet.

When you decide on the material for the box, you will need to choose its design. Below we describe all possible options for the installation of structures made of plasterboard and pvc panels.

Whichever method you choose, don't forget to access the counters and spikes. To do this, you need to mount the door. It can be hidden, or it can be an ordinary white metal, these are sold in almost any hardware store.

The whole wall is closing

The first option for hiding the communication pipes in the toilet is to close the entire wall with pipes. This is done on a metal profile box. In the space where there are no pipes behind the decorative wall, you can make a storage for small items (toilet paper, household chemicals, etc.).

There must be at least 3 cm between the wall to be installed to cover the pipes and the pipes themselves! This does not depend on the type of construction chosen.

Oblique false wall

If the pipes pass only from the side, then you do not need to cover the entire back wall of the room, it is enough to close only the corner with communications.

Square box

If you are interested in how to close the pipes in the toilet and leave more space, then the answer is simple: make a box only around the pipes. If they go in the corner along the walls, then you get a kind of column in the room. If they walk on the floor, then it will look like a step.

Multilevel box

If the pipes do not pass clearly along some wall, for example, only to its middle, then you can make a multi-level box and use it as a shelf for decor, household chemicals or something else. This method is not suitable for mounting from plastic panels.

Roller shutters

Rollers are successfully used to hide pipes. They are mounted less often than structures made of plasterboard or pvc panels, because the installation itself takes more time, the structure is more expensive, and the appearance is not very attractive. But this way you get the ability to access any pipes behind the panel and storage space for small items. Of course, for the latter, you will have to make several shelves.

Utility locker

A very convenient and cute way to close pipes in a toilet room is to put cabinets made of chipboard, wood or plywood. The lower part of the pipes can be covered with a color-matched plastic screen. So you kill two birds with one stone: create additional storage space and decorate communications.

The only disadvantage of this method is the price. It is the highest in comparison with all other options, even if you mount everything yourself.

Decorating pipes

With a little ingenuity and skill in making various hand-made products, you can decorate the pipes that run through the room with mosaics, decorative paint, rhinestones and other interesting techniques or materials.

The choice of the method and materials for decorating or hiding pipes in the toilet is always up to the owners. There are no strict recommendations or contraindications for any of the options listed above. Even in a small room, it is usually possible to install a structure made of plasterboard, pvc panels or chipboard boxes.

How to close a sewer riser in a toilet methods

In an ordinary apartment with a separate bathroom, almost all pipes are located in the toilet. Here, as a rule, there are counters, bends are made. The already small toilet looks like a technical room. And the toilet turned out to be here completely by accident.

There are several ways to hide all this disgrace.

1. Construction of false walls.

One of the simplest and most common options is to completely close the riser in the toilet with drywall. It must be borne in mind that the false wall will take away somewhere half a meter of free space. The toilet room is already small, and after sewing the riser, not everyone will be able to sit freely on the toilet.

The way out is a wall-hung toilet. A special frame on which the plumbing fixture is attached and the cistern will be hidden behind the drywall. This will save space.

False walls can be not only attractive, but also functional. If you equip the free space with shelves, you can store household items there.

2. Construction of a square box.

This method is suitable if all pipes are in the same corner. The box saves free space. And with this option, you need to leave the door opposite the meters and valves.

3. Equipment for oblique false walls.

It goes at an acute angle to the side or back wall. It is advisable to turn to this method of masking the riser when thinner pipes branch off from the main pipe. The toilet will have to be moved a little to the side.

4. Creation of a multilevel box.

When the pipes are "scattered over the walls" of the toilet room, it is better to build a multi-level structure. Each of its elements will cover a separate section of the network.

The box can be two-level, three-level. Building it is, of course, more difficult. But space is saved and stands for important trifles are obtained.

How to get rid of a pipe once and for all

For those who are not looking for easy ways, preferring to do everything thoroughly, there is a cardinal way to get rid of the riser - transferring it to the wall. As a result, the area of ​​the room does not decrease, the flat and smooth wall fits perfectly into the interior conceived by the designers.

The walls will become even and nothing will disturb the harmony

This option is not possible in every home, but only where the thickness of the partitions allows you to cut down the grooves. The capital method will require a complete replacement of communications, including passages through the floors, you will have to notify the neighbors, incur additional costs.

Another way to remove unsightly details is to install suspended plumbing fixtures. This process requires a professional approach, not always the thickness of the walls will allow it.

Suspended plumbing not only conspires ugly pipes, but also adds lightness to the room.

A simple option for protection from plastic panels

Plastic is ideal for the construction of a false wall, it is not afraid of humidity, temperature extremes, and mold. rot, easy to clean, quickly disassembled if necessary. A significant advantage of the panels is that they do not have to be putty and painted - it is enough to choose a shade and pattern to match the color of the tile.

It is easy to choose the color of the panels to match the shade of the tile.

To fix the panels, you need to build the same frame as for a drywall screen. In this way, make a false wall, and a box. Covering with ceramic tiles or applying textured plaster on the plastic coating will not work, for these cases you will have to choose drywall.

The actual work

Everything has been checked, invented, materials have been purchased. Now the work itself.

1. Installation of the frame.

If an oriented strand board is used for cladding, then the frame is made of wooden blocks. For drywall, we use a metal profile. And how to close the riser in the toilet with plastic panels? Better on a wooden frame.

• Set vertical guides by level.
• We attach transverse lintels for stiffening. The step is determined by the dimensions of the cladding material, as well as taking into account the dimensions of the inspection hatch.

2. Sheathing.

For deaf structures, drywall is more suitable. Oriented strand board is preferred to create removable cladding. She's tighter. And dismantling will not harm her.

3. Finishing.

Tiles are attached to the cladding with glue, plastic panels with staples. You can just putty and paint.

If the very visible communications located in the bathroom spoil the interior of the room, then this is not a problem. Figure out how to close the bathroom riser and get to work.

So that you do not have to mask numerous and long pipes, draw up a diagram of all communications in advance and try to arrange them and the plumbing so that in the end all the utilitarian details remain as invisible and hidden from view. But still, this is far from always possible, and often it is simply impossible to hide the riser completely. But such a problem is not as difficult as it seems, if you know the ways to solve it.

Sewerage connection diagram

Sewerage wiring

Even at the design stage of the house, a drainage system should be developed that would harmoniously fit into its structure. Initially, the diagram shows the location of the common vertical riser. It is usually located in the bathroom or toilet. Horizontal drain pipes radiate from its bottom. It is to these pipes that all plumbing fixtures are connected through siphons.

The bathroom usually has a sink, bathtub and washing machine. The toilet is connected to a toilet and a bidet (if available). The kitchen usually has one sink or together with a dishwasher. The sewerage scheme in the house provides for the inclination of all horizontal pipes towards the riser of at least 3 degrees to ensure the gravity of drainage water.

Sewer system elements

The installation of the internal sewerage system is carried out using key elements, which cannot be dispensed with.

The elements of the house sewage system include plumbing fixtures, connecting pipes, fittings, splitters, siphons, elements of fastening the pipeline to the walls. Pipes are now mainly used polypropylene or metal-plastic. Steel pipes are already out of use. Exceptions are copper pipes or stainless steel products. However, their cost is very high. The connecting elements are made from the same material.

Risers are now also used plastic. However, if you are not changing the main cast iron riser, then you will need additional rubber adapters to connect the plastic pipes and the cast iron riser. The riser has a standard size of 100 mm. In some cases, when it comes to a multi-storey building above five floors, a riser with a diameter of 150 mm can be used.

The purpose of the riser is to compensate for water hammer in the system and the absence of foreign odors in the house. If it is not possible to bring the riser upward, outside the house, then a vacuum valve is installed at its outlet, which solves the same problems. The diameters of horizontal drain pipes are usually 50 mm.

Laying sewer pipes in the house

We will prepare everything you need for the installation of the sewer system.

Installed sewer pipes

The rules for installing sewer pipes provide for the use of the following tools for work:

• Shears for cutting polypropylene pipes.
• Perforator.
• Hacksaw for cutting metal.
• Level.

In the beginning, all the elements of the system are put together. That is, they are trimmed and fitted. It is better to cut pipes with special scissors, but you can also use a hacksaw.

Installation of sewer pipes in the house is carried out in the lower part of the wall, observing the required slope to the riser. After joining the pipes, the pipeline is secured to the walls using a perforator and special round latches. The connecting fittings also have sockets with gaskets, so all connections are easy to make.

In this way, literally in one day, you can completely assemble the sewer system in your home. Now on sale there is everything you need for these purposes.

The easiest roller shutter exit

The fastest way to solve the problem of hiding the sewer is by using roller shutters. This design maximizes access to the pipes, while there are no doors cluttering the space. It doesn't take experience to hang blinds, and beautiful blinds don't need any additional finishing.

Plumbing shutters are not only beautiful but also practical

Taking into account the increased demand, manufacturers produce special plumbing shutters, endowing them with sound-insulating and heat-saving properties. If desired, it is easy to choose a color that is in harmony with the decoration of the entire room.

Space-saving conspiracy box

The wall completely covers the utility part of the room, but significantly reduces the usable area. In order to save space, as well as for sheathing protruding risers, build a conspiracy box, hiding the sewer pipe. It will be a little more difficult to make a frame for the box, since you have to tinker with the corners. A solid corner is easy to obtain from two ud-profiles fastened together, directed with shelves at right angles.

According to the arrangement of the elements that need decor, the protection system can be triangular or tetrahedral. When there are many protruding parts at the bottom, and only a riser is located at the top, you can build a multi-level box. So there will be more space, an additional shelf will be formed for storing small items.

Choose galvanized profiles for the frame. For a separate toilet, where the humidity is significantly lower, it is allowed to use wooden blocks.

Solid way drywall wall

The easiest way to hide the sewage system running in a technical niche is with a false wall. Use plywood or chipboard as a material, but drywall is considered the best option. For work, one sheet of dry plaster will be enough, it must be green in color - this is how moisture-resistant drywall looks like, suitable for use in wet rooms.

A completely closed technical niche is difficult to see with the naked eye

The frame of the false wall is made of galvanized profiles (which is preferable) or wooden blocks. When marking the attachment points of the profiles, it must be borne in mind that the distance between the partition and the riser must be at least 3 cm. First, the guide profiles are fixed to the walls, then to the floor.

If you plan to decorate a plasterboard screen with tiles, then it is necessary to provide for a distance between the rack profiles of no more than 40 cm. In cases where the walls already have ceramic tiles, drilling should be done in the tile joints.

Drywall is cut out according to previously prepared drawings and fixed to the frame with self-tapping screws. The finished wall is putty and decorated, taking into account their own wishes and general design. To make it easier to work with the inspection door, to make it less visible, use the simple but convenient magnetic mount.

Video how to close the riser

If your own experience is not enough to carry out high-quality repairs, you can always turn to specialists for qualified help. Professionals will quickly assess all possible options, carry out calculations and permanently hide the ugly sewer from their eyes in the most suitable way.

Can a sewer riser be closed? Yes, you can, the main thing is to do it right. There are several ways to do this job.

Application of a false wall. This is the most comprehensive way. In order to make it, you need plywood or chipboard.

Use galvanized profiles to frame the false wall. Fix the profiles to the walls, then to the floor. There should be a distance of 3 cm between the partitions. The drywall is fixed to the frame by means of self-tapping screws. A sewer pipeline is hidden in the box. This design can be three-sided and four-sided. Sometimes multilevel boxes are mounted. This method is the best option if you are closing the riser in the bathroom. If you have a separate toilet, you can use wooden blocks instead of galvanized profiles.

Plastic panels. This is a very practical material that is not affected by external irritants such as humidity, temperature changes, and mold. They are also easy to disassemble and assemble, no need to paint and putty. It is enough just to pick up the plastic panels of the required color. You will need to build a frame for the wall and box, lay the panels.

Roller shutters. If you do not want to waste time on complicated methods, you can close the sewer pipes with roller shutters. They do not require finishing, they are easy to install, as these are ordinary blinds, and they provide maximum access to the riser. Now there are special designs, for example, with noise insulation and heat saving.

• Drywall or plastic box. Use a metal profile and just sheathe it with plastic.
• Household wardrobe. This is a great option to mask valves, filters, meters and pipes and store cleaning supplies, household items. Make a frame from wooden blocks, fix it with dowels to the walls of the toilet, install hinges and doors. For the manufacture of the cabinet, laminated chipboard and plywood are suitable.

Methods for masking a riser

So how can you close the riser in the bathroom? This can be done in a variety of ways:

• Disguise in the walls. In this way, you can hide the riser only at the stage of its installation. And the work is very difficult and time consuming, be prepared for this. First, you need to draw up and transfer to the wall a diagram of the location of all communications. Then, with the help of a perforator, recesses should be made slightly larger than the diameter of the pipes. Further, pipes are placed in the grooves. Then it is advisable to cover the entire surface with plasterboard, chipboard, plywood or PVC panels to make a kind of false wall. It is not recommended to fill the recesses with concrete; in case of breakdowns and dismantling, you can severely damage the riser.
• Cupboard. Yes, you can hide the riser in the closet. Moreover, you can either purchase a ready-made piece of furniture with a missing back wall and slots in the shelves, or make it yourself from a regular one. You will need to dismantle the back. Then, using a crown and a drill, make holes in the shelves of the corresponding diameter for the pipes. This method will allow not only to hide the riser, but also to provide additional space for storing products or hygiene items.
• The box is the most common way to disguise communications. It is convenient in that you can purchase a ready-made structure of the required dimensions at a plumbing store. It is easy to install, so it's easy to install. In addition, there are different options for shapes and configurations: triangular, rounded, rectangular boxes, as well as consisting of one or more levels.
• Plasterboard partition. To mount it, you first need to install a solid frame, which is usually made of galvanized profiles. Although some use wooden beams, this material requires additional treatment with moisture-proof and antifungal agents. Further, drywall sheets themselves are attached to the frame with self-tapping screws, and it is advisable to use moisture-resistant ones, since the humidity in the bathroom is significantly increased. The next stage is finishing. Different materials can be used, but PVC panels and ceramic tiles are the most practical and preferable.
• Plastic panel construction. Plastic panels are practical, inexpensive, moisture resistant, lightweight and relatively easy to install, as they have convenient joints. But the only drawback of using them is the complete absence of noise isolation, any sounds will penetrate through them. If this does not bother you, then get down to work. First, install a frame that can be manufactured in the same way as for a plasterboard partition. But in this case, it is desirable to use a metal profile. Install plastic panels on it. The joints can be masked with corners.
• Roller shutters will not only hide all communications from the eyes, but also leave unhindered access to them. You can move the shutter at any time to, for example, open or close a valve or troubleshoot problems. Roller shutters are installed in guides. In this case, the riser itself should be located in a recess so that it does not interfere with the movement of the shutter. And along the edges of such a depression, the frame of the future structure is just mounted. Currently, it is possible to purchase special roller shutters designed for bathrooms and toilets. They not only play the role of camouflage, but also perform hydro and noise insulation functions, as they are equipped with an additional inner coating.

For many owners of apartments or private houses, the question arises of how to close the sewer pipe in the toilet. It looks too technologically advanced, spoils the decoration of the room with its appearance. There are not too many options for solving the problem.

Most often, a decorative box is installed. It is finished in the same style as the toilet and hides the pipes. It is important to remember that one day you may need access to a wiring or riser. Therefore, it is necessary to ensure the possibility of quick dismantling of the box. Let's consider this issue in more detail.

Disguise materials

Before hiding the sewer pipe in the toilet, you must choose a suitable camouflage method. The materials used for this must meet the following requirements:

• ecological cleanliness and harmlessness. The room is small, the concentration of unwanted secretions increases very quickly;
• resistance to moisture, no corrosion or other reaction;
• compactness, low weight of the structure.

The following materials meet these requirements to a greater extent:

• plastic panels;
• MDF;
• plywood;
• drywall.

All sheet materials must be moisture resistant. The design of the sewer riser must retain its appearance for a long time.

When choosing how to close up the sewer pipe in the toilet, one must remember the need to repair or clean the pipes. It is not recommended to close up the wiring tightly, so that later you do not have to urgently break everything. If necessary, the structure is dismantled in a predetermined order. After the completion of the work, the box is put in place without re-closing the pipes with new materials. Since there are many ways to seal the sewer pipe in the toilet, it is important to carefully analyze your capabilities. You should not choose complex methods without special training, experience and skills. It is necessary to provide a decorative look, a combination with the rest of the interior elements. Most often, the manufacture of the box is combined with the general finish, in order to obtain the same design of all surfaces as a result.

Ideally, the box should completely cover the pipes and merge with the finish, not standing out in any way from the general background. In addition, it is necessary to provide free access to valves and water meters. For this, a special hatch, plastic or metal, is installed. There are ready-made elements on sale, you just need to choose the right size.

Concealed pipe installation

One of the ways how to hide the sewer pipe in the toilet is the hidden laying of wiring and other pipelines. For this, at the stage of installation of communications, a recess (groove) is made in the wall.

With hidden installation, it becomes possible to avoid the creation of unnecessary structures. The walls of the room remain flat. However, there are limitations. If you have to groove a load-bearing wall, the groove depth should not exceed 15% of its thickness. This is a requirement of SNiP, the observance of which is mandatory for everyone.

In addition, embedding an existing sewer riser into the wall is a challenging engineering task. If the pipeline is already installed, it will have to be offset relative to the vertical axis. This will create difficulties in the passage of drains and can cause blockages. Therefore, when deciding how to close the sewer pipe in the toilet, it is necessary to clarify in advance all the nuances and the possibility of applying the techniques. Most often, hidden installation is used by owners of private houses, who take this moment into account even at the design and construction stage.

Box marking

Before closing the sewer riser in the toilet, you need to perform a number of preparatory steps. To install the structure, you need a support system - a frame. Its dimensions must be carefully calculated, taking into account the thickness of the material of the slats of the supporting structure and the cladding itself. It is recommended to draw up a plan of the room on a scale, mark on it all the existing pipelines and the distances from them to the walls. For this, measurements are first made using a ruler or tape measure.

When drawing up a drawing of the frame, it is necessary to immediately mark the installation site of the hatch on it. To do this, you must have a ready-made unit in order to know exactly its dimensions and installation features. In addition, you need a right or left element so that it is convenient to open and close it.

For the assembly of the frame, wooden strips or metal plasterboard rails are usually used. Their size must be chosen so that the box is not too large. Considering the thickness of the cladding and decorative tiles (if they are to be installed), the size of the box may be too large.

Using plastic panels

When deciding how to close a sewer pipe, it is recommended to consider plastic panels. This is a good way to solve the problem for inexperienced people. The advantages of plastic panels:

• low price. Only 3-4 panels are required for assembly;
• a wide selection of colors, widths, patterns. You can choose the material for the finished finish;
• ease of installation. The assembly of plastic panels is quick and requires no skills. All accompanying profiles are on sale, you can arrange corners and abutments to the walls;
• the material does not create a load on the supporting structures;
• no reaction to moisture;
• cutting and processing of panels is carried out with simple tools and is not difficult.

These advantages have made the material the most popular. The low cost and ease of assembly allows for frequent trim changes, updating the look of the toilet. The panels are used in various cases, from installing an apron in the kitchen to wall cladding. Plastic is not afraid of any impacts, except for mechanical ones. However, if dents appear, the skin can be replaced quickly and inexpensively.

Drywall box

The assembly of the drywall box is usually done for the further laying of the tiles. The process resembles the installation of a plastic structure. First, the frame is assembled, then it is sheathed with sheets of drywall. The last stage is the finishing coat (tiles, decorative plaster, painting, etc.). It is necessary to choose moisture-resistant grades of material, since it is impossible to close the sewer pipe in the toilet with ordinary drywall. It will pick up moisture and lose its strength, tiles or plaster will peel off.

It must be remembered that quick dismantling of the box in this case is impossible, therefore, all pipes must first be put in order.

Other ways to disguise

When deciding how to close a sewer pipe, it is not necessary to limit yourself to well-known techniques. You can hide pipelines under different designs. Some users install roller shutters that provide access to pipes without dismantling the entire structure. Others install a plywood box and paste over it with mosaics. There are craftsmen who install a semicircular case with the application of textured plaster, mosaic tiles or other types of finishes. It is important to avoid over-decorating or decorating the structure. The box must not stand out or look like a foreign element.