Street lamp do it yourself from metal. How to make homemade street lights with your own hands from what to make a street lamp do it yourself

In addition to lighting in the house, the organization of light on the street remains a relevant issue. Door territory, courtyard, wickets - all this needs lighting in the dark for comfortable movement on its own territory. Street lamps can also be used in open gazebos, on balconies and terraces in the evening day for past air.

In modern stores, a fairly large number of street lamps are sold, but due to the characteristics of their structure, they are very expensive, the organization of good lighting can do in a penny. From the situation, you can get out, using street lighting created by your own hands - in this article we will consider options how to create homemade street lights, taking into account the required exterior.

Varieties

Before proceeding with the development of our own design, you need to decide which kind of street lantern we need. And the types are the following:

Suspended lights - a long chain that ends with a light bulb with a light bulb. Install on the corners of roofs and canopies, on trees, on M-shaped pillars. A very beautiful option that has one drawback - with a long chain on a strong wind, the lamp starts to swing, which can lead to its breakdown.

Big Tesser - Classic options are found in any public park, look like high metal racks with a matte spherical flappon at the top. There is a huge amount of modifications that are in the various number of plafoons, their design and location. Well suited to illuminate large open areas and tracks. Minus - high cost.

Ground lamps - embedded directly to the ground for one level with the surface of the soil. A powerful light flux is directed strictly up. Such lamps are used for decorative lighting of large green plantings, high trees and lush shrubs - an interesting version of the lamp for giving. The cons in the fact that due to the direction of light they cannot be used as the main lighting. Due to one level with the Earth, constant cleaning of the ceiling to restore the normal light flux is required.

Ground spot lamp

Wall lights - miniature models depending on their capacity can be used as decorative, additional and even main lighting. Usually located at the entrance to the courtyard, on the sides of the front door, on the walls of the house along a long track, a rare case - installation of such lamps on fences as a common and security lighting.

What light bulbs are best used on the street?

Consider already known facts about light bulbs on the part of their use as dacha luminaires in an open environment.

Incandescent lamps are the classic and most popular way, which, fortunately, begins to move towards more modern analogues. Cozy yellow light, relatively high reliability when used even in the open sky, borders with the colossal voraciousness of electricity with a small light output. Romantic, but not ergonomically.
Halogen counterparts - with the same power consumption, there is a much larger amount of light. The most unsuccessful option for use in the country - is repeated to huge temperatures, very fragile, burn out at the slightest voltage drop, are completely not protected from dust, dirt and moisture, even in good lamps, not to mention homemade versions. Use is not recommended.
LED bulbs are the most preferred option for such lamps. They are reliable, economical, do not contain harmful substances, are not demanding of the source of electricity, you can choose any comfortable color temperature. Of the minuses, it is worth noting the fairly high cost of such light bulbs, however, the lack of dubious, because the quality of light and energy savings with more than it pays for it.

Making options with their own hands

To make a street lamp with your own hands, you can use any materials with which you can handle. The main requirement is that this material is to be resistant to the environment, completely protecting both the light bulb and the cartridge with cereal contacts under voltage.

Bottle lamp

One of the most beautiful, but at the same time and simple models of homemade lanterns is a beautiful glass bottle as a protective ceiling. Due to the narrow neck there will not break the powerful light bulb, so they are usually used as an additional or decorative lighting for a country house. If you own the glass cutter, it is possible to cut off the bottom at the bottle, then you can use a light bulb.

How to make a street lamp in this case? To create such a lamp, grind the wire through the neck, connect the cartridge from the bottom side and screw the light bulb. Gently for the wires tighten the cartridge into the bottle housing, secure the wires in the neck with a plastic clay or glue. Suspend the resulting lamp for cottages to the right place and turn on the light. Note that it does not have protection against moisture and can be used as a backlight only under sheds.

We use ordinary banks

For a complete set, it would be good to have a cover to such a jar that fits tightly to the edges of the hole. Put several holes in it, skip the wires through them. On the other hand, attach the cartridge, screw the light bulb. Lower the collected design to the jar, the edges of the opening gently dear glue and put the cover on it. After the glue dries, such a street lamp, made by their own hands, can be swallowed by the wire at any convenient location.

Old Tin Canned Banks and Canned

They are not necessarily disposed of immediately, they can come in handy to create an unusual lamp with a pattern. Arm yourself with a marker or pencil using stencil, drawing or eye - draw the pattern that you like. With the help of a sharp building knife, a hammer with a thick nail or a drill make holes in the jar along the circuits of the pattern. Place the lid as much as possible so that it closes the future plafof tightly.

Similar to the above method, do the holes in the lid, connect the ceiling to the extension wires, then close the lid tightly. For the strength of the wire, you can enhance the wire of the wire if the bank is too heavy. As a result, we will get a beautiful flashlight with a luminous pattern that can be used for romantic gatherings outdoors.

Having a sufficient amount of metal, such a ceiling can be watered to a high metal pole, having received a simple lamppost made by their own hands.

Be sure to follow the safety technique when working with acute equipment, when you do lanterns with your own hands, when connecting wires to the network, be sure to turn off the supply of electricity on the shield, work in dry conditions, without dust and dirt.

Homemade lamps for giving open almost limitless decoration opportunities, because it is possible to create just such a product that the most harmonious fit into the current exterior of the house. But the tailored lamp is usually not intended for use in open street conditions - it is either not surviving the strong gusts of the wind, or moisture and dust will scroll very quickly and oxidize all the contacts of our homemade, which can lead to a light bulb, cartridge breakdown or at all - to the closure.

Conclusion

To create your own hands, the lamp for the cottage you can use any blowing materials - there are old bottles, spoiled banks, even rusty tin with a neat approach will be able to create a colorful and cozy atmosphere under ancient. If it does not work first time - do not despair. After a few attempts, you will really get that street lamp made with your own hands that you like.

If you want to decorate the territory near the house or dacha with unusual lamps, but finances do not allow to acquire expensive lighting devices, then you can do it yourself. How to make a street lamp with your own hands? You need to be patient and desire, then the homemade source of light for the street will delight the eye. Next, we will provide simple instructions for the manufacture of the lamp at home.

Choosing a place and preparation of materials

Before you begin to make a lighting device with your own hands, you need to consider where the street lamp will be located. Depending on the place, the method of fastening the design will be selected. The homemade lamp will become an excellent solution when lighting the arbor, veranda or perimeter of the whole house.

The method of fastening can also be different. The street lamp can be installed on the support or attached to the wall or simply suspended. The most difficult thing to make a flashlight on the support, as it is required to find the necessary pillar. If you make lighting devices yourself, it is best to select simpler options, as in the photo below:

You can take any of the girlfriend. It may be wood, plastic, metal or glass. If you want to make a device that will serve for many years, then the best solution will be a metal lamp.

For work it is necessary to stock metal (sheets and bars) and the welding machine. If this is not, then you can apply a fastener fastener.

Step-by-step assembly instructions

To assemble the street lamp from the metal, you must first select its model. It may be retro style (under ancient) or minimalism. The homemade wrought iron is considered popular, which we offer.

The first stage of work is to create a sketch of the future lamp for the street. The picture below shows the common option:

To make such a product, durable and durable, must begin with drawing up the drawing. The design consists of such elements:

side walls (4 pieces);
top cover;
bottom cover (bottom);
decorative finish.

Example drawing:

When making a homemade lamp for the street, a cold forging is used. If there is welding equipment, then connect all the details will be easy and simple, it will greatly simplify the task. If there is no such device, it will be necessary to prepare the fasteners in advance. It can be bent corners of the walls of the product. Do not forget about glass. Before collecting the design, you must first install the glass. You also need to invent in advance how to fix the electrical cartridge in the lantern, if it is provided for by the design.

Installation and Connection

To connect the street flashlight to the electrical network (it can be an ordinary or diode lamp) you need to stock the following elements:

Cable products (brand cable VG). To connect, it is recommended to use a two-housing cable.
Terminal blocks. With their help, a reliable fastening of wire connection places are carried out. Their type depends on the number of connections. Pads are calculated on the current up to 10 A.
Corrugated pipe. Diameter is better taken up to 25 mm. Corrugation provides protection against various rodents and mechanical damage.

As a rule, the street lamp, which is installed near the house, connects to the power source through the cable wiring. To position all the wires, you need to prepare a special trench for them in advance. The average and optimal trench depth should not exceed 80 centimeters. By air, the cable is not recommended for security purposes. About how to hold a cable in the ground, we told in the relevant article.

Also in order to collect a safe lamp for the street, it is recommended to use a cable corrugation. Follow the wiring in such a sleeve before laying it into the ground. About how to stretch the cable through the corrugation quickly and correctly, read in our publication.

When the lighting device is installed on the wall or the facade, the connection to the electrical network is as follows: the first thing you need to do is isolate contacts. Then the wires for the connection are summarized to the switch box. It is also advisable to make the following: to solder contacts and wrap them with a tape. The connection point in this case can be the usual outlet. But there is such an option as a cable connection directly to the terminals in the shield. The last step is to install the lamp. For street lighting, it is more expedient to use LED lamps. They shine brightly and at the same time the most economical.

To pay less for the light, you can additionally equip your homemade street lamp by the motion sensor and photowork. About connecting the motion sensor, actually, as well as about the connection of the photoLel, we told in separate articles with which we strongly recommend reading.

As you can see, make the street flashlight with your own hands you can quickly and easily. The main thing is to have a great desire, the desire and, of course, the material necessary for work. This type of lighting for the street is considered more secure, as its body is completely closed.

Master classes

Well, the last thing I would like to provide you - visual video instructions on how to make a street lamp from metal, tree and even glass jars. You can see all the most simple master classes below:

That's all that I wanted to tell you how to make a street lamp with your own hands. We hope our instructions were interesting for you and helped in assembling our own garden lamp!

samelectrik.ru.

How to make a street lamp for giving?

Varieties

Before proceeding with the development of our own design, you need to decide which kind of street lantern we need. And the types are the following:

Suspended lights - a long chain that ends with a light bulb with a light bulb. Install on the corners of roofs and canopies, on trees, on M-shaped pillars. A very beautiful option that has one drawback - with a long chain on a strong wind, the lamp starts to swing, which can lead to its breakdown.

Suspended lamp on a thin chain

Big Tesser - Classic options are found in any public park, look like high metal racks with a matte spherical flappon at the top. There is a huge amount of modifications that are in the various number of plafoons, their design and location. Well suited to illuminate large open areas and tracks. Minus - high cost.

Classic street floor lamp different sizes

Ground lamps - embedded directly to the ground for one level with the surface of the soil. A powerful light flux is directed strictly up. Such lamps are used for decorative lighting of large green plantings, high trees and lush shrubs - an interesting version of the lamp for giving. The cons in the fact that due to the direction of light they cannot be used as the main lighting. Due to one level with the Earth, constant cleaning of the ceiling to restore the normal light flux is required.

Ground spot lamp

Wall lights - miniature models depending on their capacity can be used as decorative, additional and even main lighting. Usually located at the entrance to the courtyard, on the sides of the front door, on the walls of the house along a long track, a rare case - installation of such lamps on fences as a common and security lighting.

What light bulbs are best used on the street?

Consider already known facts about light bulbs on the part of their use as dacha luminaires in an open environment.

Incandescent lamps are the classic and most popular way, which, fortunately, begins to move towards more modern analogues. Cozy yellow light, relatively high reliability when used even in the open sky, borders with the colossal voraciousness of electricity with a small light output. Romantic, but not ergonomically.
Halogen counterparts - with the same power consumption, there is a much larger amount of light. The most unsuccessful option for use in the country - is repeated to huge temperatures, very fragile, burn out at the slightest voltage drop, are completely not protected from dust, dirt and moisture, even in good lamps, not to mention homemade versions. Use is not recommended.
LED bulbs are the most preferred option for such lamps. They are reliable, economical, do not contain harmful substances, are not demanding of the source of electricity, you can choose any comfortable color temperature. Of the minuses, it is worth noting the fairly high cost of such light bulbs, however, the lack of dubious, because the quality of light and energy savings with more than it pays for it.

Making options with their own hands

Bottle lamp

Decorative Lighting Little Bottle Light Bottles

We use ordinary banks

Variety of glass jars lamps

Old Tin Canned Banks and Canned

Having a sufficient amount of metal, such a ceiling can be watered to a high metal pole, having received a simple lamppost made by their own hands.

Plafof for a lamp from tin can

Conclusion

lampagid.ru.

Street lamp do it yourself: instructions and photo ideas for country lighting

Today, almost any construction store is able to offer a beautiful and high-quality street lamp for every taste and wallet, which can perfectly decorate the design of the country house. Nevertheless, it is not always the cost of quality products capable of satisfying the buyer, but to purchase a cheap option is doubtful. Based on this, many owners of houses prefer to collect the necessary element with their own hands, thereby killing two hares - it turns out cheap and quality at the height (still do it).

In the article we will tell about the peculiarities of self-making and assembling lamps for a private house. Also in the material will feature photos of finished solutions from masters as examples.

Varieties of street lamps

Obviously, the street lamp that you intend to place on the country area should perform the following functions:

If possible, not just fit into the design of the country house and the design of the garden plot as a whole, but to complement it;
It is good to cover the territory near the construction, so that in the dark day it is not scary to move on its own site.

Lamps for street lighting have the following classification:

Suspended lights - can be fixed directly on trees when it does not make it difficult to connect to the network, or to the ceiling beams on the veranda. In most cases, have the kind of a durable long chain ending with a flappon;

Ground lamps are installed directly on Earth, an excellent solution for covering the pedestrian alley. In addition, it is often used as a backlight for green plantings on the site, be it beautiful flower bed or floral vase with original vegetation, and additional decorations for any element in the courtyard, such as a summer pavilion or swing. In most cases, ground fixtures are performed rounded or rectangular shape.

Floors are mounted on the veranda or on Earth. The classic floor lamp is an even rack equipped with a round lamp on top, but there are also more advanced versions that are distinguished by a large number of plafoons, interesting forms and unusual sizes.

Wall lights - are considered to be the best solution for organizing lighting near the entrance to the house or near the wicket or gate. In terms of its design and form, such lamps can be performed in a different style, but most often buyers choose options performed by "under ancient".

Below is a selection of photos of street lamps that can be bought in the store and do it yourself.

Sources of light for lighting on the street

For the organization of street lighting, a wide variety of light sources can be applied:

Solar panels. Luminaires with them can be mounted even in places where the power supply is not provided. Such batteries operate on batteries with energy stored from sunlight. At his charge, the lantern will be able to last up to 12 hours.

When using the solar battery, it is important to know that its installation should be produced in place where the sun shines as much as possible during the day!

LED bulbs. Compared with the following option, it is possible to save up to 100% of electricity. Of course, the cost of LED lamps can not be called modest, but the service life of such lamps will be maximal. In addition, for its price, they offer absolute harmlessness and safety, because there are no harmful substances, including mercury. Yes, and the durability of the lamp is much higher than that of other products, since it is almost impossible to row the housing.

Halogen lamps. This light source refers to one of the most economical and durable, yielding only the previous option. In comparison with classic incandescent lamps, they offer a reasonable light intensity. The main disadvantages of such lighting are that the lamps are afraid of dirt on the flasks, they are sensitive to temperature differences and are very hot when working.
Classic incandescent lamps. The most fiscal option, however, do out of them a street lamp - not the best solution: after all, the lighting from them is too strong, and they will break off on electricity bills!

Selection of material

Most often, the summer residents prefer to make lamps of plastic, but this solution is difficult to be called successful, because plastic does not differ in great strength, often breaking and breaking. It is more correct and more reliable to make a street lamp from metal, for example, from bronze, copper or brass.

Steel is allocated by its resistance to precipitation, and therefore the lamp will be well opposed to external influences, which is very important when implementing street lighting. However, from the point of view of beauty, this option is difficult to name the best!

Made with her hands The lantern from copper perfectly complement the exterior in retro style. However, the main disadvantage of copper is that the material is oxidized with time, acquiring not the most attractive greenish tint. As for bronze, it darkens, so that such a lamp will have to be constantly cleaned.

Considering all the above, brass remains the best material, satisfying the requirements of both appearance and strength indicators.

How to make a street lamp with your own hands?

Working with metallic raw materials requires timely preparation of the necessary toolkit:

As for the material, quite often the lamps are performed from the following girlfriend:

Remaining building materials;
PVC pipes;
Wooden chips;
Old kitchen utensils;
Tin and glass jars;
Plastic glasses and bottles of which plaffones are made for garlands;
Clay;
Cardboard boxes and packages.

Lanterns from such materials look especially original and interesting, and you can make all the work with your own hands as simple as possible and quickly. The main disadvantage here will be the fact that the lamps from the primary materials are difficult to name durable and durable.

If you wish to make the most beautiful and original street lamp with your own hands, many dacms use the maximum fantasy supply, sometimes spying on third-party solutions in order to borrow a couple of ideas. Modifications of various ideas may be uncountable set. Below are a photo of some interesting decisions.

Well, let's deal with how the lamp is done with your own hands. Below we will look at the 2 most frequently used solutions that will allow all the work with your own hands as simple as possible and quickly.

Glass bottle lamp

Make a plander from a can or a glass bottle is easy, besides, the light can easily pass through the glass, completing the evening landscape with beautiful effects.

For work will be useful:

Indicator;
Pliers;
Decor elements;
Bank or bottle;
Cartridge;
Insulating tape.

Operating procedure:

Mount the electric pipe, fix the wiring in the cartridge, after which we insert the light bulb;
In a bottle with a narrow neck, it is better if the original color and shape, we place grinding glass, transparent balls, small beads or any other small objects that can reflect light;
We put a spiral-like wire in a bottle - you can give it such a form simply by screwing the latter on your finger;
Light bulb with the cartridge is lowered into the ceiling, after which they fix it with silicone.

Covered lamp do it yourself

Lighting in the form of an adhesive lamp will become a longer and reliable solution. To work will be required:

Welding machine;
Steel bars;
Stripes;
Corner.

Order of work:

The first thing is the trapezoid or rectangular case of 4 steel frames;
From the outside of the frame, the frame is covered with a steel bars of rods;
From above, the housing is covered with a metal cap;
Fastening to the wall will be a bracket that is made of a square bar of steel;
Steel bands will serve to create lower curls;
The latter at the end are welded and fixed with the help of interfacits.

Nuances connecting to the network

When you make a street lamp with your own hands, due attention should be paid to the work related to the network connected to the network. This will require:

Corrugated pipe or mattarowing for protection;
To fix the connection block terminal;
VG electric cable.

In most cases, for connecting homemade fixtures, a two-housing wiring is used by a cross section of about 1.5 mm2. The best solution will be to buy the bay, where the total length of the cable will be about 100 meters. It is recommended to select 18-25 millimeters with a diameter of 18-25 millimeters. It is necessary to protect the wire from random damage at rustling of the Earth, as well as from rodents.

Depending on the plaffones and the number of compounds in terminal pads, it is worth providing one or a pair of slats with holes in 2.5-4 millimeters. Pads are recommended based on the current (5-10a).

Installation procedure:

The first thing at a distance is not more than 0.6 m from the house, a trench of a depth of about 0.8 m for laying the cable is digging;
When installing the flooring, the metal legs are initially installed, after which the wire is pulled through them. It is placed in the trench inside the corrugation. After dragging over all devices, the wiring is trimmed so that the end of the cable does not exceed 15 centimeters;
We prepare the second cable and also wake it through the pipe, after which they fix the terminals a pair of wires;

If the lantern is located on the facade of the house or its wall, it is necessary to insulate switching boxes well, while it is better if the cable will be connected inside them the clamping nuts. Alternatively, you can use passage, but in this case it will be necessary to additionally pour each connection. Scrucia closure zone with a tape;
Installation of the electrical circuit. Since it provides for a pair of wires - "zero" and "phase", then it is necessary to check that the switch is able to operate the phase cable. Only so when replacing the burnt lamp, in the off state, there will be no risk to get a shock. Determine the phase cable will be able to use a special indicator;

The connection point can be the most ordinary outlet, which will allow you to quickly de-energize the entire system if necessary. In addition, no one bothers connect the street lamp directly to the terminals on the electrical tailor equipped with an automatic fuse;
During the installation of the switch, be sure to check the compliance of its network load power;
Before finally bury the trench, make sure the flashlight works properly. Strengthen the post of lighzing the soil or the bay of its concrete.

Decoration for plot and house: photo

In addition to its direct function, the street lamp is also capable of perfectly supplement the design of the country area and the house as a whole. To select the most successful solution, it is worth experimenting with lighting and luminaire forms. For example, you can use lighting devices in the form of mushrooms, decoring the garden track. The plafo-caps placed on top will be beautifully reflected down the light down, thereby creating the original light effect.

If there is a swimming pool in the country, as an option, use the floating balls or cylinders. Another option is glowing sculptures, vases, porridge or benches. It is possible to achieve the latter with the help of halogen paint, which is reflected in the luminescent light in the dark.

Obviously, the colorful and original design solutions for registration of lighting in the country can be a huge amount, which partly contributes to a considerable selection of lighting devices. However, much more pleasant and cheaper to fulfill all the work with your own hands and the street lamp to that direct confirmation! With due fantasy, you will not think of unique lighting, in extreme cases, you can always use our photo collection with lamps.

prostrouky.ru.

How to make homemade street lights with their own hands

Today, many people make lighting on the backyard of their own hands. Such a tendency has been observed for several years, and it does not lose its relevance. With your own hands today you can make almost any lamp, which in its characteristics and appearance will not give way to purchased products. For giving an excellent solution there will be a stylized old street lamp that can be collected with your own hands.

Our article will tell you from what the street lamp can make, what kinds of similar models are currently existing, and will also introduce the assembly process with the algorithm.

Select option

Decorative lantern

If you decide to build a lamp with your own hands, for example, an old street lamp, you at the very beginning should be deciding with his view. Today, street lighting devices are several types:

functional. It can be a floor lamp, a scab or lantern. At the same time, it can be made simple appearance or stylized under the old street lamp. Such a flooring can be portable or stationary, standing only in one place. It is much easier to make a sconium or a wall lamp, since they will leave noticeably less forces and time;

Note! Important moments in creating a lighting device will be the choice of the light source. Often, the LED lighting type is used, since it is more economical and beneficial according to the technical characteristics of the glow. In this case, the light source must be quite powerful to fully illuminate the required area of \u200b\u200bthe subsidence.

decorative. Lighting function in such a product is minimal. A LED pocket flashlight or decorative candle can appear as a light source here. Most often, such a lamp make a portable type, but the flooring or sconium is found (although much less often).

the wall is rather popular and quite often made with your own hands. They are installed near the entrance doors, staircases and gates. They are of a wide variety of forms and sizes, which gives the will of fantasy in making it with their own hands. As a light source, LED lighting type or decorative candle can be opened here;

Note! It is the wall type of lamp that often stylles under the old street lamp. Such an exercise will become an excellent addition to the garden interior, both in the gazebo and on the porch.

Lantern from banks

floor lamp. It can be installed either on the floor in the veranda, or immediately in the ground. The flooring has a lantern form on a short-standing leg, which can vary at its length depending on your wishes. For such a lamp, soft light is characterized. Therefore, powerful light sources are not suitable here. LED, halogen and luminescent type of backlight can only be used with a darkened lamp tool;
portable lamp. Also quite often done with your own hands. It has the simplest design and is easily embodied with the help of glass jars and wire;
ground lamps. This type of lighting device is also fairly simple in the assembly, but it is extremely rare, since the practical is always used as a decorative backlight.

What kind of lamp you will do, depends only on your needs, desires and opportunities.

Materials

Metal lamp

Make a street lamp with your own hands from a wide variety of materials. This list includes:

plastic. It is not recommended for the manufacture of precisely the street type of lamps, since it is quite fragile and can easily break from any mechanical impact. Although it can be used as auxiliary material;
metal. From such a material, you can make an old street lamp, which add your dacha entourage and sophistication. But with the metal it is difficult to work, especially if it needs to be forgotten. Therefore, this material is not chosen as often. Such lighting devices will be the most resistant to frequently changing and adverse conditions of the external environment (high humidity, temperature drops, etc.);

Note! As a metal, you can use copper, steel, brass and bronze. They will give any type of antiquity lamp, especially with proper processing.

wood. This is also not the best option for the street, since without the necessary wood processing, it will quickly come into disrepair under the influence of wood insects and humidity. At the same time, it will simply make a lamp from the tree. At the same time, reorganizing the device correctly, it can pass the old street lamp.

All other materials, such as paper, glass, etc. Not very suitable for street conditions. The power source for the lanterns can be LED or any other type of economical light bulbs.

Assembling lamp

Example of drawing

You can make a street lamp in your own hands according to the following algorithm, which for different models will differ only with some nuances:

draw the drawing by which the assembly will be carried out;
we prepare the material - cut and process the tree, bending the sheets of metal, etc.;
next, create a light flaf. The design is collected according to the drawing scheme;
after that, we proceed to the assembly of the wiring.

Note! The wiring assembly for the future lamp is the most important and responsible stage.

Connect the street lamp to the power grid, with your own hands, you can only with the necessary knowledge. Otherwise, you should use the services of a specialist. In order to connect a lamp (LED or any other type), you will need the following materials:

If we do a landscape model, then for wires you should dig a trench in which the cable is laid. The optimal depth in this situation will be 70-80 cm. At the same time, the distance from the house to the channel should be at least 60 cm.

If you do a flying type of the lamp, then do this:

making metal legs. Clean pipes can act in their roles;
stretch through them cable;
then place the cable in the corrugated sleeve;
after that, the cable is cut in such a way that its length is at least 10-15 cm;
next, we prepare the second piece of the electric pipe. It should also be conducted through a corrugated pipe;
then both pieces of the electric cable connect with the help of terminals.

If the flashlight is naked onto the wall or facade, then the wire connection is carried out into switching boxes. In this case, all contacts must be worn securely. It is necessary to solder all the contacts and carefully wrap them with a tape.

Installation of electrical power

After all these manipulations, we proceed to the installation of the electrokem. Here the switch must be connected to the wire phase. Thus, in the off state, the possibility of shocking is completely eliminated. Remember that with the incorrectly assembled electric hammer, the LED and the luminescent type of light bulbs may flash. As a connection point, a regular socket can be used. But you can directly connect the cable to the terminals on the electrical protection. After that, check the scheme for performance and disguise the wires.

Stationary mangals for the cottage from brick do it yourself

Now the lanterns for the cottage are widely represented in the range of any construction store, but prices for them are not happy with their availability. Therefore, the manufacture of such lamps is becoming increasingly popular with their own hands.

What are the streets outdoor for giving

Such lights must perform two main functions:

Lighting the territory around the house so that its inhabitants can safely move around her in the evening and night without fear stumble or fall.
Serve as an element of the decor, organically fit into the concept of landscaping of the country area.

At the moment, the main varieties of street lamps for private households are divided into the following categories:

Wall lamps are ideal for lighting the entrance to the house and a small area in front of it (and are also installed near the input wicket or gate). They can be the most diverse in shape and decoration, but most often there are so-called lanterns "under ancient", characterized by the grace and harmony of forms.
Lamps type flooring are installed directly to the ground or on the floor of the veranda. The classic option assumes a flat rack with a round ball at the end, but modern models often significantly depart from this sample, differing in a variety of forms, the amount of ceiling and height. The latter is usually from 0.3 to 0.5 m. Such improvised "floor lamps" usually give a very soft, pleasant and muted light, at the same time allowing you to consider everything that happens on the site.
The ground fixtures are mounted both directly into the soil, which opens unlimited possibilities for the beautiful backlight of trees, bushes and flowers, and along pedestrian alley for the convenience of moving along them. These lights are suitable for installation and near small architectural forms (summer pavilions, swings, utility rooms, etc.). They give a beam of light, directed strictly from-up, and in some models its angle of inclination can even be changed. Usually, the ground luminaires have a strict round or rectangular shape.
Suspended lamps are traditionally attached to ceiling beams on open verandas, sometimes to trees branches, but it is rather difficult due to the technical difficulties of connecting to the power grid. Such lanterns in the country, the photos of which are presented below, are usually a long and durable chain ending with a flange of any kind and magnitude.

Sources of light in lamps for cottages

In street lamps for a country house use a variety of light sources. It can be:

Conventional incandescent bulbs. Their advantage is low cost, but the ability to use such lamps for outdoor lighting remains in question. They consume too much energy, and excessive brightness does not allow to fully enjoy the beauty of the evening garden.
Halogen lamps are distinguished by greater efficiency and will serve much longer incandescent lamps, providing good color reproduction and light intensity, but at the same time heated and sensitive to sharp jumps of voltage in the network and contamination of the flasks.

LED lamps allow to save up to 95% of electricity compared to conventional lighting sources. This is not the cheapest option, but they differ in a long service life, do not contain mercury-type substances harmful to the human body. Also, any LED flashlight for the cottage is equipped with a very durable case, which, unlike a glass flask, is not so easy to smash.
Solar panels. Lights with such lighting elements are perfect for installation in those places of the site, where it is problematic to pave ordinary wiring. Their main part is the battery absorbing solar energy. After dark onset, such a lamp is automatically turned on. With full battery, the lamp is capable of working without a break for 10-12 hours. It should be placed only in those places of the site where the sun warms most of the day.

Materials for making lanterns

The most unsuccessful material for the manufacture of street lamps for the household plot is plastic that is easy to break or break. The most durable will be lamps made of steel, bronze, copper or brass. Steel models are resistant to environmental impacts, but often look somewhat boring.

Copper lamps perfectly fit into the interior of the plot in retro-style, but do not forget that copper in the air over time is oxidized and becomes not a very pleasant greenish hue. Bronze also darkens over time and requires constant cleaning. Practical and lanterns from brass, which combines high strength with aesthetic attractiveness.

However, for the manufacture of lamps from such materials requires a number of tools (drills, drills, screws, etc.), therefore, they are popular and lanterns made of girlfriend: glass and tin cans, clay and even wooden chips. They produce an original impression, and in order to make them, no special skills are required. The only drawback of such lighting devices is fragility and a short life.

Features of electrical wiring in street lights

In the manufacture of lanterns for the household plot, it is necessary to especially carefully approach the installation of wiring. To connect lighting devices to the network you will need:

Electrocabage type VG.
Terminal pads for reliable fixation of connections.
Metal worker (corrugated tube) to protect the wire.

In order to make lanterns for giving with their own hands, usually take a two-core cable, the thickness of the vein in which is 1.5 mm. In order not to return to the store, it is best to immediately buy a whole bay, in which the length of the wire is 100 meters. In the same place, it is also necessary to purchase a corrugator with a diameter of 18 to 25 mm, which will protect the electrocabel in the ground from rodents or random damage when the earth is digging.

The diameter of the holes in terminal blocks is usually varied in the range of 2.5 to 4 mm. They consist of one or two planks: which type to choose is determined by the number of compounds and ceiling in the luminaire. Pads must be calculated for current strength in 5-10 A.

At the installation itself, the following operations must be performed:

I dig in trenches in which the cable will be laid. The optimal depth for them is 70-80 cm, and the distance from the ditch to the house should not be less than 60 cm.
In the case of the lamps of the "flying" type, first install metal legs and alternately pull the cable through them. Where it will be located in the trench, be sure to place it in the corrugation. After conducting all the planned lighting devices, cut the cable so that the tail length is at least 10-15 cm.
After that, we prepare the second segment of the electric pipe, we also carry it out through the corrugated pipe and in the upper part of the lamp we combine both cables of the terminals.
In case lights, are located on the facade or wall, switching boxes should be securely isolate. The best option is boxes in which the wires are connected by clamping nuts. Sometimes wires are connected simply by passage, but then it is better to make the soldering of each connection. The seats of twist are carefully wrapped with a tape.

Now we proceed to the installation of the electric hammers. Since it provides for two wires - "zero" and "phase", it is necessary to ensure that the switch produces the opening of the phase wire. Then, when the switch is in the "Off" position when replacing the burned lamp, there is no risk of getting a blow to electric shock. Determine the phase wire using a special indicator.
As a connection point is quite suitable for a regular socket. In this case, the de-energization of the entire system can be performed quickly, just pulling out the plug. But it has the right to life and the way of connecting cables directly to the terminals on the electrical protection, which is usually equipped with a special automatic fuse that turns off the voltage supply in the event of an accident.
When installing the switch, be sure to check whether its rated load capacity corresponds to this network.
Before you burn the trenches, make sure the performance of all lanterns on the site and strengthen the poles, the rammingly small crushed stone or clay around them. In the lung soils, it is recommended to pour supports for lamps with concrete.

The most popular types of homemade lights

More and more owners of cottages and cottages seek to make decorative lanterns for cottages on their own. In the sites you can meet a wide variety of modifications of such lighting devices:

in the form of a garland where plastic bottles and cups serve plastic bottles.
from PVC pipe,
from glass and tin cans and cardboard packages from milk,
building materials,
plastic
metal,
woods
old kitchen utensils.

Very often, glass jars or bottles are material for the lanterns on the household plot. Such a glider is done very quickly, and the transparency of the glass allows the light to freely pass through its walls, creating astounding special effects. For the manufacture of such a lamp, you will need a glass bottle, cartridge, pliers, tapes, an indicator and a knife for stripping isolation on the site of the electrical circuit, as well as decor elements. Now it is necessary to make the following operations:

Install the wiring, connect the wires in the cartridge and screw the light bulb.
Take a bottle with a narrow throat, preferably from alcoholic beverages, unusual shape or color solutions, and place on the bottom a variety of small beads, reflecting the light transparent balls, grinding glass.
Screw to finger a thin multicolored wire so that it turns out a spiral from it, and also put it in a bottle.
Then lower the cartridge with a lamp in an improvised plander and securely fix it with silicone.

A more durable option is a wrought lantern. For its manufacture, you will need steel rods, stripes, corner and welded apparatus. Forged lamps are made as follows:

Produce a housing of 4 steel frames having a trapezoid or rectangular shape. To do this, use a corner whose cross section should be 15x15x2 mm.
Outside, the frames are closed with lattices, which are either simple, or contain volutes and curls. They are welded from a steel rod, the diameter of which is 05 mm. The entire body from above is covered with an iron cap.
The bracket that is responsible for the mounting to the wall is performed from the steel bar of the square shape, the cross section of which is 12-14 mm. The material for the manufacture of lower curls will be the thin steel band. The ends of the curls are connected by the electrical welding method and through interceptions.

Garden lamps as decor elements

In order to make new notes in the interior of the plot, it is worth paying attention to various forms of lanterns for country houses that will help the site to catch new paints. So, along the tracks, you can place the luminaires of the mushroom form, at the very top of which is a pretty ceiling cap. In this case, the light is reflected down, which creates a unique atmosphere of magic.

Foresting lamps in the form of a cylinder or in the form of floating waterproof balls look unusually (if there is a swimming pool in the house). As light sources often use special glowing benches, vases, sculptures or caspo, in which flowers grow. This effect is achieved through the use of special halogen paint, which gives fluorescent light in the dark. As can be seen, ideas for their own production of light sources are simply inexhaustible.

I want to tell about how I did lamps for illustrations to the book of Mandelstam "Two trams." There they are a little different, but made according to the same principle. Since the book is going on at night, I needed a lot of lamps, which would cover the city for which trams ride. They had to be on the one hand to be like street lights, and on the other hand, they also shine, that is, it was necessary to hide the wires somewhere. I thought for a long time, how to arrange it, until once it came to my head - a cocktail tube! It simply fits: inside you can hide the wires from the light bulb, and its bending is already very "lamppar".

Materials that you need: For the lantern itself: a tube, a cap from a sports bottle, buttons and beads - among them it will be necessary to find those from which the suitable plander will come out, and coins, with the help of which we are taking the bottom of the lantern so that it does not fall. Glue: Adhesive gun (if not, in principle, you can do, but with it a million times more convenient), super-glue - to glue beads, "Pokilipol" - to glue coins. Kraska: black paint-aerosol (choose such, To lay on plastic!), And the second, other color (I chose a brown), in a jar. For electricity: LED (you can buy in the store "Chip and Dip" or in some store like "radio components") for 3 volts, Battery case for two batteries (also sold in "Chip and Dip"), wire, switch (again, can be bought in "Chip and Dip", and no, they do not pay for advertising :)) and tape. : The main thing is a dump knife, scissors and brush, without the rest you can do. However, pliers, sewers and hammers will be useful.

So, start with the fact that cut two pieces of the wire of centimeters to 7 longer tubes and a knife to clean their tips: cut the plastic layer.

You will have two wires, which at both ends the metal part sticks out:

Further you need to attach these wiring to the LED. If you know how to solder - first, I envy you, and secondly - just solder them. If you, like me, do not know how to solder, then you have two exits. The first is to ask someone to solder someone :) For example, about my house there is a "radio metal" store, there is a pretty gentleman chinit TVs and tape recorders, and between this 100 rubles solder the wiring to the light bulbs.

Well, if this is all impossible for some reason, you can do differently. This method is less durable, but what to do. We are conferring the SWITT code and pliers gently regenerate the wires at the ends, so that it turns out a loop:

Here is such a looting:

Then impose the extended end of the wire in the loop:

And tighten as it follows. Do the same with the second wire.

Then cut a small piece of tape:

And clog the locations of the wires and LEDs:

I chose a large metal button with a lion's muzzle, consisting of two parts and some small metal piece with a hole.

Pliers, I rented a button in the button, where two parts were connected:

And when to the end rented, disconnected:

As a result, I got here such a basis for a ceiling:

With the help of sewed and hammer I made a hole:

Then I inserted a light bulb into the ceiling, and the ceiling in a small metal thing. This thing is needed so that the location of the lamp and the ceiling is careful. Then I glued them with super-glue.

It is clear that, depending on what buttons you have, the method of manufacturing a ceiling can vary. When you did it, insert the wires sticking out of the ceiling, into the tube:

Glue the tube and a super-glue chill or a glue gun.

Then take a bottle cap and cut it all unnecessary: \u200b\u200btransparent cap:

Details in the hole:

And also cut two holes for wires inside:

There must be such a "knot":

And insert the tube into the lid hole so that the tube reached the first "gate". Stick it with a glue gun. Important! Do not warm up the gun too much, and then the tube is melted. Start glue as soon as it warms up, do not wait. If you do not have a pistol, I think, you can bore it with a palstika or make a lot of napkins and PVA, but, of course, it is longer and vigorous.

The romance of the evening garden ... It develops like a mosaic, from a variety of nuances, among which the light plays a leading role. Unfortunately, the illumination of the country area is sometimes disassembled by an undeservedly secondary place, although the "Light of Light in the Dark Kingdom" is required elementary in order to be easily moving in their possessions in the evening. Not to mention the fact that the beauty of plants hidden in the dark is able to light up new paints and acquire unexpected fantastic forms. It is enough just to skillfully "play" with light, applying several interesting ideas of illumination and design of garden lamps.

Truly, garden lighting is akin to art - it is able to create unprecedented effects that are born from the union of plants and decorative illumination. You only need to realize some "educational" ideas for the cottage - with your own hands you can transform your garden that from the inconspicuous, no different from many others, it will turn into a fabulous corner that can donate you at any time of the day.

Evening lighting of giving not only give the garden some mysteriousness, but will allow without fears moving around the site

Your garden house and country landscape will look natural in the afternoon and mysteriously in the evening, if you successfully combine lighting functionality with its decorativeness. What tasks are imposed on the lighting of the garden plot? Depending on the function and zone of the placement of external luminaires, such types of dacha lighting can be distinguished:

highlighting at home;
highlighting tracks;
highlighting stairs;
accent backlight;
patio illumination;
festive backlight;
security illumination.

An important condition for the right organization of the cottage lighting system is to preserve the aesthetics of the garden during the daytime, that is, the lamps for the night light should not disturb the harmony of the countryside landscape. To accomplish this condition, it is enough to choose the lighting devices of natural shape and / or made of natural materials. A widespread welcome for the decorative backlight of the garden - which absorb solar energy throughout the day and in the dark in the form of a mysterious luminescence, smiling gently, as if from the inside of rock.

The original backlight placed in thick vegetation will create a cozy atmosphere in the zone of a secluded rest

Air butterflies and dragonflies, glowing in the dark, naturally and unobtrusively neighboring garden plants

Or maybe you already like a group of bright butterflies on long twigs, stuck in the ground, which the day will revive the lawn, and at night glow? And how do you unexpectedly looking out of the bush, a gnome with a lampade or a luminous frog, which makes it up under a big sheet? Such original solutions will give your dacha individuality and originality, to the joy you and the good envy neighbors.

In addition to artistic impression, it is necessary to consider the technical side of the highlighting of the cottage. The use of alternative light sources based on solar energy is the maximum economical option to illuminate the garden. In addition, such a type of lighting will not spoil the appearance of the site with long electric cords stretching through the flower beds and tracks, since it consists of an autonomous battery unit and a group of lamps connected to it.

Unusual illumination of trees in the form of glowing wells is so mysterious that inexorably want to look into this depth

Artificial flowers in the form of lamps on solar panels harmoniously fit into the landscape garden design

The backlights connected to the power grid is more logical to post closer to the house - to illuminate the facade, the input group, the terrace, since these zones require more active light, and the gasket of little extended layout does not require significant labor costs and cash investments.

Types of backlighting for garden plot

Decorative focused backlight is the most expressive lighting created by an accent light beam and directed to the original landscape composition - flowerbed, water, wood or just on the beautiful flower. With such a directional lighting, it is important to properly balance the intensity, color spectrum, light spot pattern and the location of the light source. Interesting idea for the backlight of the garden can be the lighting instruments, located under the trees with an unusual crown - in the evening the directional light draws the silhouette of the tree and will create a fancy figure of shadows on the ground.

Evening backlight garden so thinly draws out the outlines of the plants that they sometimes take a fantastic, unreal view

Lighting garden tracks does not imply an abundance of powerful lamps - it can be small sobs or built-in light sources, giving only a hint of lighting on both sides of the country "Farviter" and indicating the direction of movement. More thorough "navigation" requires stairs that can be illuminated by lamps mounted in steps or in the fencing of a staircase march. The main idea that can be applied is the backlight of the staircase with a large number of lamps in the form of improvised candlesticks from glass cans or tin grouped along the edges of the steps. Such a move as it is impossible to give the garden romantic entourage, and do it yourself such miniature light sources with their own hands will be difficult.

The backlight of the gazebo in the garden and the tracks leading to it will be the key to a pleasant evening speaker in the family of the family in the air.

Patio lighting, terrace or gazebo is the way to preserve the availability of holiday destinations at your dacha in the evening, rainy or cloud days. Since the lighting based on accumulated solar heat is not too bright, it is better to use electrical light sources to illuminate common areas. It can be outdoor and desktop, built-in and spotlights or hung to the ceiling whole "garlands" lamps. Beautiful multicolored bottles, complex lamps of plastic or wood, bright balls from beads or extravagant design of shiny metal - only the choice of the design of the central lighting in the recreation area depends on you. Depending on which atmosphere you want to give the place of "public assembly", the lighting can be chamber and cozy, or more festive and bright.

Unusual and a little fantastic effect can be achieved by placing many lamp balls on long rods along the track

The basic requirement for security lighting is its intensity and dislocation in fundamentally important places to control the safety of the site - near the gate, at the entrance to the house, around the garage, around the perimeter of your possessions or other places where the valuable equipment or country inventory is located. As a rule, the lighting protection systems are formed using powerful LED lamps and are subject to certain rules - both by placement and in terms of design, so in this case it is better to choose industrial sources of light sources.

Also useful will be a comparative review of the lamps for the garden:

A great solution for the illumination of the country area is pots for plants that the light accumulate during the day, and at night they emit it

Examples of owning lamps

The lag who came to the dissent, who retired the kitchen utensils, who served his plastic dishes and others would seem to be unnecessary to you will now use you for the "production" of country lamps. Everything will go to the move - from the glass floor to grandmother's sets - a little fantasy, a little patience and all rarities, standing on the landfill, turn into lighting devices that carry you light and joy.

In order to make a cottage lamp, you do not need to spend a lot of money - look in the grandmother's chest and you will find everything you need for creativity

Option # 1 - from glass bottles

Fantasy lamps from unnecessary glass containers are able to transform your garden, and there will be no single penny. An ordinary glass container can be turned into an amazing lamp without any effort. Take a bottle of original shape or unusual color, pour multicolored small beads on the bottom of multicolored glasses, transparent balls that will reflect the light. Screw a multi-colored wire on your finger so that the spirals come out and place them in the vessel. Little flashlight Fix with a silicone in a bottle neck - it will be a light source that is convenient to turn on and off as needed.

Buying alcoholic beverages - look at the form and color of glass bottles - because now they will be useful to you to create homemade lamps

Interesting plafoons for the suspension chandelier can turn out from glass containers of different shapes and sizes. Only here how to cut off the bottom of the bottle? Yes, easily! Refine a bottle of thin rope moistened in kerosene or gasoline at the level of the desired cut, and inside the bottle, fill the cold water clearly to the line designated by the rope. When you set up the rope, the bottle will burst and a smooth cut is formed, which you will only pass a little to polish so as not to cut down. Now you can fill the electric cord in the ceiling and connect the bulb cartridge.

Cutting a glass bottle bottom and securing the metal plate on the pin, you will get a comfortable candlestick for garden lighting

A more powerful light source will turn out if you connect several multicolored bottles with wire and jeighten them to a ceiling arbor, a patio or a summer house. In the event that you will seem a little gloomy bottled colors, take stained glass colors and color glass, showing fantasy and your innate feeling of harmony. And do not be afraid to give yourself the will - you can always remove the solvent of a not completely removed fragment of the stained painting and update it. Even better, if you charge the mission of coloring bottles to children or grandchildren - and you memory, and kids in joy.

A little creativity - and from a glass bottle will be an expressive wall lamp in the form of a stylized torch. To do this, the hole is drilled in a rigidly twisted lid of the bottle, through which kerosene is poured and the pre-impregnated with the same combustible mixture of a natural rope or a stainless steel tube is refilled.

Pour into the bottle of fuel mixture and repairing the wick, you will create a lamp in the form of an improvised torch

Alternating Bottles-Plaflons with candles and flowers give a homemade chandelier on a metal frame an unusually natural look

What is the New Year Garlande to dust in anticipation of the next new year? Place it in a champagne bottle - and you will have an expressive lamp for giving. Lazy something for a long time, but hurts hunting to refine? Mix absolutely arbitrarily thread or rope on the bottle, but so that the lumens remain, and apply the paint of your beloved color from the spray on this kind of cocoon. When your "painting" snacks a little - discharge the bottle. Unusual? Go ahead.

Bottle-candlestick is distinctive due to the idea of \u200b\u200ba candle holder in the form of a spiral locking in a neck with a ring

Option # 2 - from glass cans

The main problem of glass container, as the base for the self-made lamp - an absolutely transparent surface that does not dissipate light. The task facing you in the process of manufacturing a glass lamp with your own hands is a fragmentary to decorate a transparent vessel so that it, nevertheless, it worked on the lumen - scattered and smoothed the light from the candle or light bulb.

In order to conveniently remove the molten wax from the bottom of the candlestick bank, pour some sand or pebbles into it.

What can be done with the prose, but beautiful along the outlines of the jar, remaining, as the memory of the once eaten exotic pavements? It all depends on what style the newly new lamp was conceived. Want in the style of country - wrap the jut with a jut rope, fixing it on a glass with silicone glue. Would you like vintage style? Cut the narrow long strips from a colorful sither, cotton lace or guipure and "make it up" your jar in Prababookian outfit. Do you like techno-style? Remove the voltage coils and diode lamps from the old TV or tape recorder - wrap the copper wire to the jar. Cylindrical LED flasks stir as decor - they will be further refracted and modified the flow of light, and the lamp will turn into a certain object of alien origin.

Unlike bottles, glass banks are rarely multicolored - pull them out with bright stained paints

The original idea of \u200b\u200bthe decoration of the lamp for the cottage in the style of pop art is the painting of the banks with multicolor luminescent paints applied to the inner surface of a glass jar in the form of spots of the wrong shape. Having accumulating sunlight in the afternoon, at night the cans will emit a soft unobtrusive glow, overflowing with juicy shades of neon blue, pink or lemon color. Completing the glass containers of different heights and diameters, painted by phonophores combined by color scheme, you can create a bright composite group in its garden, refreshing the path to home, alpine slide or flowerbed.

Bank covered by myriads of small dots applied by phosphor, radiates soft elegant light

Option # 3 - from tin cans

Drinking a beer and biting the spin in tomato sauce, do not hurry to send to the trash of tin - everything is useful in the country house. For example, to implement extraordinary ideas in creating country lamps that can give your garden an unforgettable appearance.

What is needed for this? Hammer, nails of different diameter and cylindrical wood. Sketch on paper Motive drawing - it is desirable that it was not a very complex closing ornament. Now attach your sketch to a tin can, and to put the woods inside it - it will save a tin from strain. Punching the holes of the hole at an equal distance, transfer the drawing to the jar - you get holes through which the delicate light will be selected.

The usual beer can be converted to an exotic lamp due to the pattern formed by small holes

Who would have thought that from the union of tin from canned and wooden clothespins could be such an unusual lamp

Option # 4 - from building materials

After the construction of the cottages often remain different building materials - cement, plastering mixtures, liquid nails, so on. It is impossible to store such mixtures for a long time - they quickly absorb moisture and take clips, but also to throw the hand does not rise. Do not despair, here is a couple of fresh ideas, how can you attain a building good with benefit for business, namely, to create dacha luminaires.

Using unnecessary remains of cement and plaster mixtures, you can make a fairly original lamp

Take a big and small plastic bottles, cut the bottom and put one to another, securing them with a thread pin. Turn over the resulting design down the neck and install it, say, on a tin can of a suitable diameter. Mix the cement mixture and fill the space between two bottles, periodically shaking the form for its uniform filling. After pouring the solution, cut the bottles and free the ceiling.

Forming separate fragments from the cement solution, connect them together - you will get unprecedented patterned egg-lamp

Option # 5 - from wood and rope

Featuring small, but expressive dry twigs, cover their flashes in chaotic order to a children's inflatable balloon. When glue grabbing, carefully disconnect your design from the ball and blow it away. Abazhur in eco-style is ready, you just need to fill the light bulb and connect the lamp to the network.

Unnecessary branches from cut-off trees will become excellent material for creating a dacha lamp in the form of a bowl

By the same principle using inflatable balloons, make a lampshade in the form of a hemisphere from the jute rope. To do this, draw the border on the ball and, gradually, sinking the intersection places, wrap it with a rope. After the glue is dry, carefully blow the ball and disconnect the rope filter from it.

Snow-white openwork lamps from ropes will create a festive atmosphere on your terrace or in the patio zone

In order to make a lamp of a tree, it is not necessary to be able to strict or saw - there is a mass of finished wooden semi-finished products that you just need to be able to apply.

If you twist a birch bark in the form of a cone, you will get a very gentle and elegant lamp to the lamp

Do not rush to get rid of the stumps - you can not only make a stool, but also an extravagant country lamp

Option # 6 - from plastic

Plastic bottles are long timely operated in the tail, and in the mane for a variety of country crafts. What only did not come up with our inventive people, the sorceress of "very" handles over plastic bottles. Not wanting to lag behind the mass trend, we hurry to offer our option "utilization" of a plastic bottle by creating an extraordinary lamp.

This is what an extraordinary lamp is whether the hedgehog, or insect, may turn out from a conventional plastic bottle

Lamp ball from plastic. 1. Cut the bottom 2. glue 3. Bend by radius 4. We form a ball 5. Installing for a base 6. We connect to the network

A lamp lamp with plastic leaves. 1. Cut the rectangles 2. Cut the leaves 3. We melt the edge of the soldering iron 4. We connect the leaves with wire

So, cut a bottle on rectangles, from which we cut the leaves. The edges of the sheet melt the soldering iron, giving it a more natural outline. We burn 2 holes 2 holes and produce copper wire without isolation in them. From individual leaves we collect branches and form a ball-shaped globe of them.

Do not hurry to throw away disposable cups after receiving guests - it is better to glue the cute multicolored lamp

Buy balls for ping pong, glue several circles from them, and then combine vertically - futuristic chandelier is ready

The original chandelier may turn out from other plastic products - disposable dishes, plastic cups and ping-pong balls. Due to the initially laid conical and spherical forms of this product, their gluing will steadily lead you to the creation of a spherical or cylindrical lamp.

Creating a fun and relaxed setting on your dacha how can not be better promoted by bright lamps from multicolored beads

Having bounds large plastic beads on a wire, twist it with a spiral and form a spherical layer of small diameter. You can get a fairly original chandelier for giving, if you complain the balls from the beads of different colors and diameter, attaching them on long suspensions to the frame.

Old discs and plates littering your wardrobe, now it is impossible for the way - of which the striking lamps will turn out for cottages

Here is the unique idea of \u200b\u200bthe lamp for Melomanians - those who have a house are littered with music storage drives with music drives and plates. Surprisingly, a wonderful lamp can be obtained from old CDs. Just drill, pre-placing the marker, 5 holes at an equal distance from each other around the circle of the disk, not approaching the edge too much, and then bore the wheels with a wire. Such a multifaceted structure may have any diameter depending on the desired size or your patience. If it is assumed that the lamp will be outdoor or desktop, then to one of the disks, which plays the role of base, glue 3-4 yams. Tooling several disk balloons to a metal plate, you will receive an original futuristic chandelier for terrace lighting or patio zone.

Corrugated plastic pipe is excellent transformed into a lamp-shell - you can only be fed to the Light Cord pipe

Option # 7 - From the old home utensils

The most comfortable in the metal home utensil is already an existing perforation capable of creating unusual light spots. Prosaic grater, colander or sietchko is already ready-made lampshades for your homemade lamps. Disconnecting the handles from two sieves, tie them with wire - you will get a flaf in the form of a ball. Rust stains or enveloped enamel disguise by covering their creation with bronze or silver paint from the canister - the lamp in the strength of retro with a technogenic taste is ready.

Drill the hole drill in the old saucepan or fill a light bulb into a regular grater - you will create indescribable lighting effects

Do not hurry to throw out the grandmother's sets in the terrible robes with a thin cob of small cracks - glue the saucer to the super-glue cup, drill the hole for the electric wire - and the vintage lamp will become the true decoration of the nostalgic summer house or arbors. Even the old spitcher can become an excellent lampshade for cottage cuisine - carefully make a hole in its day, grind the electric cord and secure the cartridge.

Old faience service that was inherited from the grandmother is perfectly modified in the retro lamp

We hope that interesting ideas , we have proposed, will help some plush to find a worthy excuse for their thrust to accumulate unnecessary things. Now they have the opportunity to breathe new life into old things - creating unusual lamps for the beloved garden.