Cleaning the washing machine with citric acid is practical and quick! How to use citric acid to clean the washing machine.

Limescale formed on the heating element and parts of the washing machine can cause breakdown and degrade the quality of the appliance. Let's talk about how to conduct preventive cleaning with citric acid and prevent such negative consequences.

When and why to clean

The formation of limescale on the heating element leads to its breakdown

In tap water, salts of various metals are always present in the composition, even when using a purification filter. These smallest particles are not visible to the naked eye, however, during prolonged use of the device they settle on the inside as a white or gray solid coating. Only distilled water can be considered absolutely pure, but hardly anyone uses it to wash clothes in an automatic machine. Most affected by the plaque TEN (tubular electric heater), which heats the water to the desired temperature during washing. When the plaque layer on this part becomes too thick, it prevents the release of heat into the water, which leads to a deterioration in the quality of the washing machine, and ultimately to burnout of the heater.

We list the negative consequences of the appearance of calcareous deposits inside the device:

increased energy consumption - the machine needs more resources to provide water heating;
probability of failure - not only the heater may suffer, but also the software of the device;
reproduction of fungus and mold on the internal parts due to insufficient air intake and high humidity.

To prevent the formation of salt deposits and the removal of existing plaque, various means can be used:

laundry detergents with the addition of special components to reduce water hardness;
special chemicals for cleaning the machine;
lemon acid;
other folk remedies - vinegar, soda and others.

Among these formulations, the most popular, safe, and often the most effective when used correctly, is the generally available and inexpensive citric acid. Laundry detergents reduce the hardness of water, but can settle in the fabric, causing allergies when wearing things. Chemicals are not cheap, and soda or vinegar can be ineffective against heavy plaque. Acetic essence is a highly concentrated product that releases harmful fumes and can damage the parts of the device.

Citric Acid Properties

Citric acid is a dry white granules

Citric acid is suitable for cleaning a washing machine and can be a worthy alternative to industrial cleaners. We list the advantages of this tool:

when used correctly, it is safe - it does not damage the parts of the washing machine, does not emit substances harmful to humans, is completely washed out of the device;
it is inexpensive and sold in grocery stores;
suitable for washing machines of any type;
the cleaning process is not troublesome and does not take much time;
if necessary, can be combined with whiteness or bleach to remove dirt inside and outside the device;
citric acid is not inferior in effectiveness to many expensive descaling agents;
it is an environmentally friendly tool for humans and animals.

However, some consumers also note negative points when using this cleaning agent. In most cases, negative reviews are associated with improper use or poor quality, expiration of the term “lemons”. We list the possible negative consequences:

scale can go off in large pieces and clog the drain of the washing machine (with a highly concentrated solution, rare use of the product);
damage to metal surfaces (when exceeding the dosage or washing at too high temperatures);
damage to rubber seals (with too frequent cleaning, accumulation of acid in the folds of the rubber cuff);
the appearance of an unpleasant odor (with severe pollution, when one cleaning is not enough to completely eliminate deposits, mold).

Instructions for use

Citric acid is sold in stores in the baking goods department.

Citric acid can be used to clean the washing machine both inside and out. Consider each of the application methods in more detail.

Inside cleaning

Scale accumulates in hidden places

To clean the washing machine inside of mucus, plaque, limescale and other contaminants, it is necessary to use citric acid once every two months. The same tool is also relevant when there is an unpleasant odor inside the device. During cleaning, the drum of the washing machine should be empty, without laundry. If you have never cleaned the device before, or more than 6 months have passed since the last procedure, take the maximum amount of powder (150-200 g for machines with a load of 5 kg or more, 100 g for machines with a load of 3-4 kg).

So, to carry out a planned internal cleaning of the washing machine, proceed as follows:

Make sure there are no clothes in the drum.
Place citric acid in the detergent compartment (70 g for machines with a load of 3-4 kg, 100 g for a load of 5 kg or more).
Set the cotton washing mode at a temperature of 60 degrees (when heavily soiled - 90 degrees), including rinsing.
At the end of the wash, open the door and inspect the rubber seals for deposits of scale and undissolved citric acid. If detected, remove them and wipe the surface with a cloth.

Citric acid can also be poured directly into the drum, but then the detergent drawer will not be cleaned.

Outside cleaning

The citric acid solution is suitable for mechanical cleaning of the external parts of the device

Citric acid can also be used to clean the external parts of the structure from dirt and dust. A slightly concentrated solution is suitable for this. Proceed as follows:

Pour 3-4 liters of warm water into the basin.
Pour 20 g of citric acid.
Stir until crystals are completely dissolved.
Take a cotton cloth or microfiber cloth, soak in a solution.
Wipe the washing machine from the outside, as well as the rubber bands on the drum and the detergent drawer.
Wipe the surface dry with a cloth (no rinsing required).

Washing at 60 degrees is enough to prevent scale formation.

To achieve the best result and take care of your assistant, without harming her, it is important to consider the following nuances:

Water temperature should not exceed 90 degrees. Otherwise, the chemical effect on the rubber and metal parts of the device may be too intense, leading to damage. For the prevention of scale, 60 degrees is considered a sufficient temperature. For severe contamination, a single “run” with citric acid at a temperature of 90 degrees is permissible.
Use no more than 200 g of crystals. 100 g is enough to dissolve up to 80 g of limescale during regular scheduled cleaning. With severe contamination, the amount can be increased, but not more than 200 g. Otherwise, there is a risk of harming the internal parts of the device.
Only powdered citric acid is suitable for cleaning - it cannot be replaced with lemon juice or other similar means, since the concentration of the active substance is insufficient.

Do not leave the house during the washing cycle with citric acid; large drainage fragments may clog the drain hole. If you do not remove them in a timely manner, a leak or malfunction of the device may occur. When you hear an uncharacteristic noise, whistle, or rattle while draining water, press the pause button to pause the device. Check the drain hole for clogging. You may need to wait for the door to unlock and check for foreign pieces in the laundry compartment. After cleaning the machine with citric acid, inspect the special compartment for small parts (usually at the bottom on the front of the appliance), clean it with a sponge, brush or a brush.

Instruction manual

Citric acid is a popular “folk” remedy for getting rid of. Its cost is low, especially in comparison with specialized means for removing lime deposits. And, unlike other "acids" (such as, for example, vinegar), it does not have a pronounced smell of its own. In addition, when processing lemon, traces of the cleaning agent are completely “washed out” of the washing machine when it enters the rinse mode (which is especially important if the family has small children or people with allergies). At the same time, citric acid effectively reacts with carbonate deposits accumulated on the heating elements and other parts of the washing machine - and successfully dissolves them.

Before cleaning, check whether small items — handkerchiefs, socks, items of linen, and so on — have “run” under the rubber elements of the washing machine. The drum should be without laundry, because cleaning can be done only in idle mode.

Pour into the main powder compartment or put 60-100 grams of citric acid directly into the drum. As a rule, it is sold pre-packaged in packages of 20 or 25 grams. The volume of the “portion” depends on the capacity of the machine: if it is designed for 3-4 kilograms of laundry, the contents of three bags will be quite enough for high-quality cleaning; for models with a large drum, the dose should be increased to 4-5 bags. It is not worth exceeding the concentration of the cleaning agent: at high water temperatures, the reaction with lime deposits will already be quite active. And an excessively acidic environment can adversely affect the metal and plastic parts of the washing machine.

Set the machine switch to the longest washing mode (as a rule, it is intended for washing heavily soiled cotton fabrics). If cleaning is carried out regularly enough, in the “preventive” mode - you can choose a temperature of 60 degrees, this will be enough to get rid of deposits that have occurred over several months. If the washing machine has not been cleaned for a long time, or if the water is very hard, select the maximum temperature (90-95 degrees). Spin mode can be turned off, but if the machine’s settings allow you to program an additional rinse cycle, be sure to use this method to “rinse” the equipment after cleaning. Press the start button.

Watch the machine while washing. Indeed, if a thick “crust” of scale has managed to build up on the heating element, it will not only dissolve, but also fall off in rather large pieces. As a result, insoluble sediment fragments can get into the machine drain when rinsing. If this happens, then during the discharge of water you will hear a characteristic buzzing or rattling sound. In this case, you need to pause or turn off - and manually clean the drain.

In order to clean the drain filter of the washing machine, remove the cover of the panel behind which it is located (it is located at the bottom of the facade) and drain the water from the drain hose into a deep bowl or basin. Place a rag at the corner of the machine that will absorb moisture. After that pull out the filter and remove from it pieces of a scum, and also all other dirt which has accumulated there. After that, put the filter back in place, close the panel, turn on the machine again and let it end the program.

Wait until the wash is completed, open the drum and bend the rubber elements - scum can accumulate under them in the form of small pieces. Wipe under a rubber with a soft cloth. Treat the surface of the drum itself - there may also be small fragments of deposits that are more like dirt. By the way, a thin layer of plaque usually also forms on the drum - and after cleaning with citric acid you will see that the metal has sparkled again.

Then open the drain at the machine and see if there are any pieces of scale left there. If there is, remove them and discard. Small fragments of deposits can be removed with a sponge, impressive pieces - directly (it is better to do this with rubber gloves).

If you wish, you can additionally “wash” the machine from small scale particles that remained after cleaning by turning on the “idle” rinse mode or short wash mode. This time there is no need for high temperatures, for "flushing" you can choose programs with a temperature of 30-40 degrees.

Wipe the drum and rubber seals again with a dry cloth. After that, leave the machine with the door ajar to allow it to dry. Now she is ready for work again.

The scale layer formed on the heating element not only increases the risk of failure of the washing machine, but also degrades the quality of the wash and leads to increased energy consumption. To avoid this, clean with citric acid regularly, every 3-4 months. If the water is hard - “prevention” can be carried out even more often, 5-6 times a year.

In order to prevent the appearance of scale, use detergents with emollients (usually information is given on the packaging of detergents) and do not abuse the wash at high temperatures - scale deposits begin to form at a water temperature of 75 degrees. And the hotter the water, the more intensive this process is. Washing at 50-60 degrees leave the heating elements clean, and the laundry in this case will last much longer.

A washing machine saves the owner from the tedious household chores - hand washing the laundry. Both the unit itself and its repair are very expensive, so it would be wiser to take care of the proper care of the machine.

Experts constantly warn: for the washing machine to serve for a long time, it must be properly looked after. This is especially true for regular descaling. But the cost of funds intended for these purposes is high. Therefore, many housewives are interested in whether there is an alternative to expensive purchased household chemicals. As it turned out, yes. How to clean the washing machine with citric acid?

When to apply

Inside each modern washing machine, heating elements are installed that heat the water during washing. Under the influence of high temperature, the salts contained in the water are converted into a precipitate, and it is fixed with a dense layer on the heating element, walls, and other details. This is especially true in regions with hard water. Some owners, in order to protect their assistant from the negative consequences of hard water, put special filters that hold salts on the pipes leading to it. These measures reduce risk, but do not solve all problems.

Not only water is a source of scale. Plaque can also form because you often wash fleecy products. For example, plaids or sweaters. Particles of fibers during extraction get into water, cling to heaters and remain on them. Another reason for the formation of plaque is the frequent use of programs with a high temperature (more than +60 ° C). The more scum accumulates on the heating elements, the more electricity the machine spends to heat water. And if you do not remove the accumulated layer in time, the spiral may burn out.

Perform preventive descaling of the machine at least 2-3 times a year.

To make sure that the heater of the washing machine needs to be cleaned, try to diagnose it yourself. To do this, take a flashlight and shine in the lower holes of the drum. Usually heating elements are located directly below it. Scrolling the drum at different speeds from side to side will help you to see them well.

If you want to protect the machine from breakdowns, use emollient powders and carry out preventative descaling of the washing machine at least 2-3 times a year.

Training

As mentioned above, cleaning the washing machine with citric acid is a great alternative to using household cleaning products. The benefits of this natural substance include:

inexpensive price;
ease of use;
naturalness and environmental friendliness;
the ability to not only descale, but also clean the hoses from a source of unpleasant odor.

Before you start cleaning, wipe the rubber gasket around the door from dirt and make sure that there are no things in the drum. Otherwise, they will shed and deteriorate during cleaning. Now prepare the remedy. You can calculate how much acid to pour in using the following formula: about 20–25 g of concentrate per 1 kg of loading volume. If the drum is designed for 5 kg of laundry, use 100-125 g of the product. The big mistake is to believe that the more acid, the better. Too acidic conditions can adversely affect the rubber and plastic parts of the machine. And as a result, instead of extending the service life, you will get the opposite effect.

Step-by-step instruction

Preparation is left behind. Now you can begin to remove the scale, unpleasant odor and, if any, mold. Below is the algorithm you need to follow when cleaning with citric acid.

Pour half of the prepared acid into the powder tray. Sprinkle the second part of the concentrate over the drum of the washing machine.
Select and set a washing program with a temperature not lower than +60 ° С. To do this, you can use the "Cotton" or "White linen". The program must necessarily be complete and include washing, rinsing and spinning.
If possible, install an additional rinse. If your appliance does not have such a function, at the end of the wash repeat the rinse procedure by selecting the appropriate mode.
Run the machine. After 10-15 minutes, stop the wash and take a break for 50-60 minutes. This is necessary in order for the acid to react with lime deposits. Then restart the unit. During rinsing and spinning, you can check whether the dirt comes out and how much it is. Do not be alarmed if a strange noise accompanies the process. It is created by the departed scale, which goes into the drain.
After cleaning, check the rubber gasket and drum for residues of limescale. Wipe the inside of the machine with a soft cloth and let dry with the door ajar.

Precautions

Sometimes the scum on the heating elements accumulates too much. When draining, its particles can become stuck in the hose and prevent the normal outflow of water. In this case, press the pause and try to remove the jam and free the drain with improvised means.

Always correctly calculate how much to pour into a powder container. Reacting with plastic parts, acid damages their structure, makes them more porous. This can subsequently cause accumulation of dirt in them or lead to rapid wear.

4.71 out of 5 (7 Votes)

Buying chemistry for a washing machine, users often try to save money - powders, conditioners and various additives are quite expensive. It is also necessary to include the costs of a descaler. It is used to prevent plaque settling on the heater and the drum of the machine.. But there is a cheaper way - cleaning the washing machine with citric acid gives fantastic results, but costs a mere penny. Let's see how to properly clean the washing machine with a lemon and save money in your wallet.

In this review, we will address the following issues:

Is this method really effective?
How many grams to put and how to maintain the correct dosage;
How often do you need to clean;
How to ensure proper care of the washing machine.

Many other points will also be affected.

The effectiveness of this cleaning method

Cleaning the drum of the washing machine with citric acid is highly efficient. Acid well cleans metal parts and heating elements from scale, giving the unit almost pristine cleanliness. Cleaning does not take much time, does not require dismantling of equipment, does not harm internal nodes, copes even with the most serious deposits. Before we tell you how to clean the washing machine from limescale with citric acid, we will talk about the effectiveness of the technique.

Despite the simplicity of the method, cleaning the washing machine with citric acid is an excellent preventive procedure that will allow the unit to serve for a long time and without breakdowns.

To make sure that citric acid copes with scum perfectly is very easy - for this we need the most ordinary kitchen kettle. If the water in your area is hard, you will see scum at the bottom in the form of a white or creamy coating. These are water-insoluble salts that form when boiled. Their entry into the human body does not give much health. And in washing machines, they lead to the formation of various malfunctions.

The use of citric acid will completely get rid of even the most old deposits. Perform the processing of the kettle as follows:

We buy a lemon in the store - it needs to be filled right in the kettle;
Next, pour water - it needs to be boiled (in electric kettles, we wait for automatic shutdown);
We drain the water and enjoy the brilliant cleanliness of the inner walls.

Washing and cleaning of the washing machine is carried out in a similar way. Even the most inveterate critics, doubting the possibilities of citric acid, can make sure on the example of a teapot that the method described by us gives simply excellent results.

Advantages of the procedure

Cleaning the washing machine with citric acid is very, very cheap - a large pack of lemon juice costs 30-40 rubles, and in some places it is sold per kilogram (which is even cheaper). Professional care products are significantly more expensive. In addition, they need to be bought constantly, while washing with citric acid is performed every 3-4 months, not more often. Therefore, the first advantage is the saving of money, which we strive for.

Many housewives often overdo it with the amount of citric acid used. Doing this categorically is not worth it, otherwise an unscheduled repair of your washing machine will be inevitable.

Citric acid is environmentally friendly, because it is the most ordinary food supplement. At the same time, it is caustic, and is added to products in limited quantities. To clean the washing machine, you need lemons quite a bit, a few tens of grams. Its use practically does not harm the environment, as the chemicals contained in store products do. And this is the second advantage - you can not only clean the washing machine with citric acid, but also take care of the cleanliness of nature.

Citric acid for a washing machine is a cheap and affordable tool that is found in literally every pavilion and store where food is sold. Therefore, there are hardly any problems with her search. It is also sold in supermarkets and hypermarkets, in city markets. If you have friends in the food industry, ask them if they use a lemon - it’s possible that they can bring you a couple of kilograms of this product (this amount is enough to clean the washing machine for more than one year). The third advantage is widespread accessibility.

Two more small advantages - a lemon (or rather, its possible residues) does not cause allergic reactions and effectively copes with mold and fungi. Be sure to try cleaning the drum with citric acid - you will like this method of cleaning.

Cleaning the washing machine with soda and citric acid gives a good effect - this powerful cocktail of two harmless substances is able to fight not only with scum, but also with persistent dirt, with fungus. It also helps from mold, which literally eats up rubber seals and settles its spores in washable clothes.

How is cleaning

Lemon gave us citric acid, which we can use when cleaning the washing machine. True, it is not extracted from lemons at all, but synthesized artificially, but the essence of the matter does not change. Let's talk about the recipe for our procedure and tell you how to clean the drum with a lemon - this is nothing new. Some people think that it needs to be added when washing, but this is not so - the procedure is carried out in a single cycle without laying the laundry. Here is a step-by-step instruction:

We prepare the washing machine for cleaning - we remove all things from it, inspect it so that invisible things do not get stuck on the walls;
It does not hurt to wash the rubber seal with a damp cloth and thoroughly wipe the glass;
Pour citric acid into the compartment for the washing machine - this is necessary so that it can wash the trough through which detergent enters the drum. The remaining compartments are left empty;
We close the loading door, start cleaning - if you decide to wash the drum for the first time in a long time, set the longest program with a temperature of +90 degrees. If you still carry out periodic cleaning and maintenance with store-bought products, include the longest program with a temperature of +60 degrees;
We are waiting for the completion of the program - the washing of the washing machine with citric acid is completed, you can open the door and ventilate.

No additional measures need to be taken. If you can look at the heater, then you will see that it has become brilliant and clean - in some washing machines you can see it through the holes in the drum, shining a flashlight there and twisting the drum itself.

When choosing a program for cleaning, make sure that it includes a rinse cycle - citric acid from scale in the washing machine helps well, but needs to be completely removed.

If you intend to clean your washing machine with citric acid, you need to determine the dosage. We recommend pouring 120 g on 6 kg of laundry. lemons, 5 kg - 100 gr. That is, for every kilogram - 20 grams of acid. Exceeding the indicated dose is not recommended, since excess lemons can have a devastating effect on the rubber seal. Reducing the amount is also not worth it, since there are a lot of dirt on the heater and there can be a lot of dirt in the machine.

Many people do not even suspect the presence of mold in their washing machine. But it can be extremely dangerous for humans. Fortunately, citric acid copes with it without much difficulty.

The program you select must be complete - with a final rinse. This is necessary to completely remove acid residues from the inside of the washing machine. Together with a lemon, the remains of scale will be removed from it. We recommend that you run the washing machine on the "Cotton 90" or "Synthetics 60" program. It will be washed for a long time, but it will completely remove all limescale, cope with other impurities, and clean the inside of the tank and drum.

As for the frequency of washing, everything is simple here - once every 3 months at a temperature of +60 degrees is enough. If the last cleaning of the washing machine was carried out for a very long time or was not carried out at all, it is recommended to drive it at a temperature of +90 degrees - in this mode, cleaning will be most effective. You do not need to add citric acid during washing - this way you will not achieve any effect or even reduce the effectiveness of the washing powder.

If your area has very hard water, install a softening filter - this will protect the equipment from damage. Increased rigidity is manifested in the form of a barely noticeable film on the surface of clean, freshly collected water from a tap or in the form of a grandiose scale of lime scale in your teapot;
Even if the water in your area is relatively soft, we recommend that you do preventative cleanings of your washing machine with citric acid - in addition to plaque, other deposits that need to be removed (including pile) may settle on the heater and drum;
After cleaning the washing machine, we recommend that you look under the rubber seal and into the filter - there may be residues of citric acid and residues of scale. All these contaminants must be removed.

Thus, there is nothing complicated in caring for the washing machine - you just need to regularly clean it with food citric acid. And forget about expensive products like Kalgon - lemon is more effective and cheaper.

Is it possible to clean the washing machine with citric acid - despite the fact that this product is one of the most common, tested and affordable, the question among users still does not lose its relevance. A washing machine is a necessary home appliance.

It greatly facilitates the life of not only large families, but also single people. And since such an assembly costs a lot, I would like to keep it in good condition for a long time.

The most common reason washing machines fail is deposits of limescale on internal parts. In order to prevent this and dissolve the one that has already formed, from time to time the unit needs to be cleaned with special tools.

Such a cleaning composition is worth a lot, and savvy housewives have long been accustomed to replace it with more accessible substances. Citric acid is one such. This white crystalline powder over the years has fully justified its effectiveness and safety - if you know how to.

Many people like to repeat - "We have very hard water in the region." while they don’t really understand exactly what they are talking about. IN

the ode in city water supplies is really tough, and this means that it contains a lot of calcium and magnesium salts. If you wash things in it or even wash your hair without additives, both the linen and the hair will become very rough and hard to the touch - this is the name that came from.

If such water is boiled, magnesium and calcium salts will precipitate. It is he who settles on various elements of the automatic washing machine, forming a scum. The more often you wash, especially at high temperatures, the denser and thicker the scale layer will be and the faster it will form. What does this threaten?

The thicker the layer of limescale on the heating element - the heating element of the washing machine - the slower the water will heat up, since lime has a low thermal conductivity.
It will take more electricity to bring the water to the right temperature.
The heater will overheat and will fail more quickly.

That is why you need not to be lazy to timely descale the unit. Efforts will be required quite a bit, but the machine will last several times longer without breakdowns, and you do not have to overpay for electricity.

How often do you need to carry out this procedure? just look at the filter of the washing machine (for this you first need to remove it). If a grayish coating is visible on it, then it is time for another cleaning. It is difficult to navigate in time in this case.

Those who operate the machine too often should clean once a quarter. The rest is enough to do this once every 6-12 months.

Advantages and disadvantages of citric acid

Why precisely this means, and not some other? The method of cleaning the washing machine from limescale with citric acid has its pros and cons. The obvious benefits are:

Accessibility - citric acid is sold everywhere and is quite inexpensive in comparison with professional products (which, by the way, also include citric acid as one of its main components).
Safety - after citric acid there is no plaque or smell left in the mashinka, which could affect the quality of the laundry during subsequent washing.
Efficiency - this powder really perfectly dissolves even petrified lime growths on the details of the automatic machine.

Additional bonuses include the fact that the inside of the washing machine at the same time get rid of the unpleasant odor, and the window becomes transparent and radiant. What are the disadvantages? They are not, if you do not abuse this product and do not violate the instructions for cleaning the washing machine from scale with citric acid.

Of course, this instruction was not compiled by the manufacturer of household appliances, but by the people. But the more reliable and reliable it is.

How to clean the washing machine with citric acid

All that is needed for this procedure is citric acid and a clean soft cloth with which you will wipe the washing machine after cleaning. Next, proceed as follows:

Remove all dirty items from the drum, remove powder or conditioner from the tray. In order to properly clean the internal parts of the unit, it is necessary to wash at idle speed. Then the linen will not suffer, and the scale will be effectively removed the first time.
Pour citric acid into the tray for washing powder - it will need 100 g for a small machine, and 150 for a larger one. If you have acid in sachets, then for one cleaning you will need 3-4 sachets, depending on how many grams of powder it contains.
Water temperature is set to 90 degrees and not less. The washing mode must be selected the longest.
If the machine has not been cleaned for a long time, then you can do this: when the drum is filled with water and it warms up, press the pause and leave the machine for half an hour. Then, the acid is guaranteed to dissolve even the most dense deposits of calcium and magnesium salts. Then take a break and continue normal washing.
If you have doubts that when rinsing washed all the pieces of scale, you can enable additional rinsing.

After the machine finishes washing and turns off, open the drum and wipe dry with a soft cloth all available parts and planes. Be sure to bend the edges of the rubber seal and wipe it thoroughly. Firstly, pieces of lime may remain in the crease, and secondly, from contact with acid, the rubber becomes hard and may break.

Therefore, after each cleaning with citric acid, do not forget to wipe the seal off dry, otherwise the unit cover will soon lose its tightness.

If you already started cleaning the washing machine, then it will not hurt to remove the filter and clean it too. In it, probably, particles of scale were delayed, which are better to remove immediately. That's all. Now your washing machine-atom shines and smells good, you can operate it further.

Many users are interested in whether there are alternatives to citric acid. yes, they are, but it’s not lemon juice at all. All that you will achieve if you clean the machine in this way is to get rid of the unpleasant smell, if it was. The acid, which contains lemon juice, will not dissolve scale on the heater; its concentration is too low.

At the same time, one should not be too diligent with citric acid powder, since this substance, on the contrary, is very concentrated. If it seems to you that not all the scum has departed, it is better to repeat the procedure, but do not immediately pour too much powder.

To prevent the re-formation of scale quickly, try not to wash old items in the machine, especially from fleecy fabrics. The optimum water temperature is 60-70 degrees. Then the bacteria on dirty things will be destroyed, and the sediment will not fall out so intensively.

After washing, try to immediately remove wet laundry from the drum, and wipe the drum itself dry and ventilate. subject to all these rules, as well as regular cleaning, your automatic washing machine will last you 10-15 years - as the manufacturer guarantees.