Artistic decoration of the facade of the house with siding. Sheathing a house with siding: interesting modern solutions

Among the variety of finishing materials intended for facade decoration, siding occupies a leading position. Finishing the facade of the house with siding helps to achieve external attractiveness, increase the thermal insulation of the room and at the same time create additional protection for external walls from the effects of adverse factors. The installation work of the decorative coating does not contain difficulties, so the process will be mastered by a person without special training. The characteristics of individual types of siding and a description of the main stages of installation will help you decide on the choice of material and finish the facade yourself.

Types of siding and the purpose of the material

North America is considered the birthplace of modern siding, where in the 19th century the house was finished with overlapping wooden boards. For the appearance of the coating was called the herringbone. Later, the idea of practical sheathing migrated to Europe. The list of materials used to decorate the facade of the house has also expanded. The characteristics of individual types of siding will give an idea of the properties of the finishing coating and the most suitable option for finishing private housing construction.

Vinyl

Vinyl siding has gained wide popularity due to its high performance. The decision to finish the facade with a vinyl coating will bring the following benefits:

simple installation;
affordable cost;
service life exceeds 20 years;
light weight does not create a significant additional load on the foundation of a private house;
wide color palette;
the texture of vinyl siding successfully imitates various surfaces, including expensive woods, marble and stone;
suitable for finishing any surface of the facade;
resistance to cleaning agents.

Comment! Hard blows to vinyl siding can cause cracks to form.

This is the most acceptable option for finishing the facades of private houses. But non-compliance with the installation technology threatens the formation of gaps that will violate the insulating properties of the material.

Wooden

The use of wooden panels is relevant for the interior cladding of private houses. The main advantages of the material are a high degree of thermal insulation and an attractive appearance. Finishing the facade with wood siding is impractical for the following reasons:

low resistance to adverse external factors;
to extend the period of operation, it needs regular impregnation with protective compounds;
high cost of the product;
fragility in comparison with the finishing coating of other materials.

Metal

Metal siding is presented in two versions - steel and aluminum. Metal steel panels are relevant for lining warehouses and other industrial buildings. Material advantages:

durability;
fire safety;
large selection of colors.

Along with the advantages, metal panels made of steel are also characterized by negative points:

need periodic coating with anti-corrosion agents;
dents remain after mechanical damage;
the significant weight of the metal finish creates a serious additional load on the foundation of the structure.
high price.

Aluminum metal siding is designed for industrial buildings and facade cladding of private buildings. Winning sides of the finishing coating:

strength and durability;
wide palette of shades;
color fastness;
affordable cost.

Among the shortcomings, it is worth noting the risk of deformation as a result of serious mechanical stress. But in general, facade cladding with aluminum metal siding is an acceptable solution that has practicality.

cement

A novelty in the market of finishing materials is cement siding, which is called fiber cement. Imitation of expensive wood or stone is achieved by mixing ordinary cement with cellulose fibers. Cement panels are characterized by the following positive features:

Resistant to fire and moisture.
There is no risk of mold and mildew.
Strength and durability.
A wide choice of colors is accompanied by visual appeal due to the ability to recreate any pattern.

But the negative aspects have become the reason for the extremely rare use of fiber cement as a facade finish for private buildings. The coating is relevant for the design of industrial buildings. Main disadvantages:

Significant weight, which not every foundation is able to withstand.
Complexity of processing.
It is almost impossible to carry out installation without special training; work is carried out using protective equipment (respirators).
High price.

The need for finishing the facade of private housing construction with siding does not always arise. Work is underway, if necessary:

give the house respectability;
carry out additional thermal insulation;
protect the walls from the influence of adverse external factors.

In the absence of these factors, a private house does not need finishing work on the front side.

Preparatory stage

The process of finishing the facade is preceded by a preparatory stage. Initially, they are determined with the amount of siding that is necessary for the job. The calculation is carried out independently, focusing on the scheme below, or they entrust a responsible event to sales consultants.

To determine the right amount of material for finishing the facade, the following information will be required:

dimensions and area of facade walls;
number and size of windows;
roof configuration of a private house.

Attention! The approximate amount of siding for facade decoration is calculated by calculating the area of windows and doors from the total area of the walls. The result obtained is divided by the area of one panel.

The material is always purchased with a margin, this is done in case of damage to the siding during cutting or installation. Therefore, the final figure is multiplied by a factor of 1.1. This will be the minimum amount of finishing coating that should be purchased for finishing the facade.

In addition to panels, additional elements are purchased for facade decoration. This includes:

start and finish profiles;
connecting strips;
inner and outer corners.

More detailed information about the additional siding elements that will be useful when finishing the facade is shown in the photo:

Self-finishing the facade implies the presence of many tools, the list of which is given below:

When the siding and related materials are purchased, all the tools are at hand, you can proceed to the preparatory work. The process is as follows:

The dismantling of hinged elements located on the facade is being carried out.
Loosely adjacent areas of the old finish are removed.
The cracks on the facade are sealed with foam or sealant.
Depending on the wall material, antiseptic treatment may be required.

Attention! If there is a pediment, the work on finishing the facade with siding begins precisely from this section of a private house.

Finishing the facade of a private house with siding in the photo below:

Frame installation

The need to install the frame is determined by the material of the external walls. Wooden slats or metal profiles are used as crates. A wooden frame for facade decoration will cost less, but metal has greater durability and reliability. The main stages of the process.

The history of siding began about two centuries ago in the United States. To protect from rain and wind, the houses began to be sheathed with painted boards, placing them at a slight angle. Today, the technology of finishing the facade with siding is the most popular. With it, you can protect the walls of the house from external influences and give an attractive appearance to the entire structure.

Siding is considered a cost-effective and easy-to-install option for finishing the facade of a building.

Modern manufacturers offer siding not only in a variety of colors, but also from various materials: wood, vinyl, metal. Each has its own advantages and disadvantages. Vinyl, or PVC, siding can mimic a wide variety of natural finishes, is durable, has a wide range of colors, but is affected by temperature, which must be taken into account during installation. Vinyl siding is usually easy to install.

Types of profiles used for finishing the facade of the house.

Wooden panels create excellent thermal insulation, besides they are environmentally friendly. However, like any wooden building materials, they must be treated with an antiseptic to avoid mold, pests and premature failure. Metal siding is strong, durable, has a variety of colors. The only negative is that it is prone to corrosion in places where the surface layer is damaged.

Ease of installation facade siding compares favorably with other cladding materials. Before you start facing, prepare the necessary tools:

perforator;
roulette;
hacksaw;
long level;
pencil;
construction rope;
tool for cutting panels (depending on the material, it can be, for example, metal shears).

Scheme of the correct installation of siding to frame rails.

For fasteners you will need nails and screws. The latter is better to choose with a small round hat.

Before you start finishing the facade in this way, you need to prepare it:

dismantle drainage systems and attachments (platbands, shutters);
carefully remove climbing plants;
if the facade is already sheathed with clapboard, then it is worth checking the integrity of all the boards, replacing the damaged ones, checking the reliability of the fasteners, if necessary, strengthening;
using a plumb line and level, check the evenness of the surface;
check, if necessary, adjust, window openings and frames.

The technology of finishing the facade takes place in several stages

To prevent deformation of the siding from exposure to sunlight, it is necessary to make temperature gaps.

The device frame for siding and laying thermal insulation. The crate helps to hide the unevenness of the wall, creates an air gap between the cladding and the wall of the house (this is additional heat and sound insulation). Depending on the location of the siding, the frame is also performed. If the siding is mounted vertically, then the crate is horizontal. And vice versa. The frame is attached to the wall with nails, the fastener pitch is 40 cm. For additional thermal insulation, a heater is placed in the crate. Suitable mineral wool, polystyrene foam.
The start of finishing cannot be arbitrary. It is carried out strictly according to the instructions. Experts recommend attaching the siding start panels and auxiliary elements at the second stage. A starting strip is installed around the perimeter of the house. If there is already any skin, then its lower edge must coincide with the upper edge of the starting strip. Using vinyl siding in your work, you can easily pick up special corners that are simply indispensable for finishing corner joints. The upper edge of the corner should not reach the eaves by 6 mm, and the lower one must be lowered by 8 mm below the launch pad. The step of fixing the corner is 20-40 cm.
Directly fastening the siding to the frame can be done in two ways. The first is with the help of an auxiliary rail. It is part of the facade and is matched to the color of the main cladding. Siding panels are inserted from both sides into this rail. The second is the "overlap" fastening. Here you should strictly ensure that the vertical joints of the panels of different rows do not coincide, as this will make the seams noticeable. It is necessary to start installation from the launch pad, that is, from the bottom up.

Important Points

All work with siding can only be carried out at an air temperature of at least -10 ° C.

It is better to adjust the length of the panels in the process of work in order to avoid trouble with too short parts.

The panels are attached to each other according to the tongue-and-groove principle. The last panel is fixed with screws or nails. All elements are attached only through a special mounting slot (it runs in the middle of the panel). It is absolutely impossible to fasten along the edges. When fastening, do not press the panels and do not pull them, so that later there is no distortion of the cladding. To return the hinged elements to their place, prepare holes in the siding for their fastening. The diameter of such holes should be 5 mm larger than necessary so that there are no problems when compressing or expanding the panels.

Siding is considered one of the most practical materials that are used for facade cladding.

Siding has good quality and performance characteristics, and is also very easy to install.

Products have a diverse range, which makes it possible to provide the house with an ideal appearance.

In this article you will see photos of houses sheathed with siding.

The material is a panel, which later acquire a complete system on the facade of the house. The material used to make the product is varied.. Accordingly, each type of siding has its own characteristics and performance characteristics.

There are a lot of options for implementing the desired design solution, each type of product has its own color scheme and a variety of textures. Basically, products are characterized by a fairly high level of strength and reliability, it is also beneficial to use them because their price level is not too high.

Beautiful siding for house cladding - photo:

Advantages and disadvantages

There are a lot of positive characteristics of siding material, the main ones are:

the duration of the period in which siding can be operated without problems reaches 50 years;
thanks to the decoration with siding panels, the house acquires an attractive appearance. With the help of this material it is possible to create a variety of styles and implement the most daring design ideas;
the material does not need special care measures, it does not need to be painted. It is very easy to handle him;
siding is characterized by lightness and elasticity;
the process of mounting the panels is very simple, it requires the efforts of only one person, which can significantly save on a team of workers;
has high resistance to sudden changes in temperature;
creates a reliable protective barrier for the surface of the facade of the house finished with siding from the effects of negative destructive environmental phenomena;
condensation does not form under the surface of the panels, since it contains ventilation holes that remove accumulated moisture;
the material is resistant to rotting and corrosion processes, and also does not collapse due to the vital activity of insects and microorganisms.

As for the disadvantages of this material, it is worth considering the following points:

The material from which the siding is made is completely synthetic. Respectively, does not have a sufficient level of environmental friendliness. This does not apply to the wooden variety of panels, although it is not as reliable as the rest.
Flammability of siding. This moment is important in the event of a fire. If the panel begins to melt from fire, then corrosive and toxic substances are released from it, which are dangerous to the health of people and animals. It is very difficult to extinguish products.
If a low temperature regime is maintained for a long time, then siding panels become very brittle and may begin to crack. It is even possible to chip off parts of the panel.
The material is not very resistant to mechanical damage. This is especially important for the metal variety, since for it even a scratch on the surface is a significant quality threat. Panels cannot be restored, which requires the cost of replacing a damaged panel.

NOTE!

For homes that are more exposed to sunlight, light-colored siding is best because it is less prone to fading.

Kinds

Those who decide to use siding for finishing work on the facade need to familiarize themselves with the varieties of such material.

Allocate:

Aluminum. It is characterized by a wide range of different reliefs and colors, this variety is intended for finishing office premises or residential type of multi-storey buildings. This is due to the fact that the panels weigh very little, and therefore will not weigh down the facade of a private house.
. It consists of wood fibers, which are pressed under high temperature conditions with the addition of a special resin. In appearance, they imitate natural wood. The price category of such products is quite high. Panels are flammable.
Steel. In most cases, this variety is used in industrial construction. The color range is quite wide, the product weighs a lot and has a tendency to the appearance of corrosion processes.
. This variety is one of the newest, invented by foreign industry. Has a high level of fire resistance. It is made from cement and cellulose fibers. It looks like wooden planks. Well suited for finishing work in educational institutions, kindergartens. In private construction is also gaining its popularity.
. It is also one of the latest inventions. It has its origins in Japan. The price category of the material is low. The siding contains clay and some other natural materials.
. It is considered the most common and popular, because it has an affordable cost, a simple installation process, the ability to hide all defects in the facade surface, and is also resistant to moisture and does not support combustion.
. A variety of siding panels that vary in width. Made from steel (galvanized). A polyester coating is applied to the surface of the product during production, which protects the material from corrosion. The main advantages of this variety are a high level of fire resistance, strength and the maximum possible duration of operation. Resistant to a wide temperature range.

CAREFULLY!

When choosing an aluminum type of siding for home decoration, it must be taken into account that during the installation process there is a risk of injury. Such work should be approached with the utmost care.

Photos of houses sheathed with siding of different colors:

Finish options

Departing from the operational characteristics and protective properties of the siding material, it is worth paying attention to the appearance of the building, which will be achieved through panels. There are a great variety of finishing options, since the range of this material allows any imagination and fantasy to be realized.

In addition to the fact that it is possible to combine several colors of the material on the facade of the building, you can purchase panels of various textures and, for example, create an imitation, or.

With regards to finishing options for installation technology, there are two of them:

horizontal.

With the help of vertical installation of siding panels, the facade of the house is visually extended, the height of the wall becomes visually larger. Horizontal finishing creates a single, coherent system that looks harmonious and cozy.

To create a more expressive and bright facade of the house, you can use dark-colored siding on the corners of the building.

Features of care

To maintain a neat appearance of the house, it is sometimes necessary to clean the surface of the siding panels from dirt. If the contamination is insignificant, then they are easily removed with a strong pressure jet of water.. You can use the usual Karcher for this. If more significant contaminants have appeared on the surface, then a soft brush is used to remove them.

If mold is found on some panels, then after removing it, the panels must be treated with a solution with a 5% chlorine concentration. In its pure form, chlorine should not be used for panels. Do not clean the surface if the outside temperature is low.

The use of various cleaning products that include abrasive structures is not recommended, as they can damage the top layer of the material. Chemicals should not be left on the siding surface for more than 10 minutes.

Useful video

In this video you will see many design options for houses with siding:

Conclusion

The ease of use of siding material, as well as its simple installation and affordable price make it a very good option for finishing work on the facade. By following all the necessary recommendations during operation, you can not return to repair work for a very long time.

In contact with

When buying a private house or building one, in any case, people think about how to improve the appearance of housing. Now this can be done in a variety of ways, because the shelves of the construction markets are simply bursting with all kinds of products.

The best way to improve the appearance of a private house is to use siding. This material appeared relatively recently, but has already become quite popular due to its qualities. Siding perfectly tolerates the effects of external factors, wind, humidity, temperature changes and mechanical damage.

As mentioned above, siding improves the appearance of a building, even if it is quite old. The bottom line is that you can not do home decoration. When using siding, there is no need to repair cracks and chips with plaster and primer.

Finishing the facade of a wooden house with siding

As a finishing material, siding has gained great popularity primarily due to its low cost and ease of installation. Any person, even without average repair skills, will be able to make the cladding of a private house using siding.

Previously, when decorating the walls of a private house, materials of natural origin were used. It could be stone or wood, but the construction market is now quite diverse in this aspect. After siding appeared on the shelves of the markets, the sale of natural wood materials fell, and there is nothing surprising here. Wooden products are extremely expensive, and at the same time they are inferior in quality. The tree does not withstand moisture or temperature changes.

Siding, of course, is made not only of plastic, but even from natural wood, and this material has a large number of disadvantages. These include the low durability of the material, as well as the increased risk of fire. The tree has to be constantly monitored, painted and restored, which requires money and time.

Metal siding has more advantages than wooden material, but it is recommended to install metal only on small buildings that belong to warehouse or industrial areas. Benefits of metal siding worth highlighting:

high strength;
long service life;
a variety of shades and colors;
low fire risk.

Although this finishing material has a fairly large number of advantages, the metal has to be closely monitored. The metal is prone to rust on its surface, so it is necessary to constantly treat the finishing material with an anti-corrosion solution. In addition, metal siding is also heavy, which can damage a wooden house too much for a long time.

The newest type of finishing material is ground type. This is a kind of siding, which in appearance is made under a stone or brick. It is distinguished by high quality, as well as resistance to weathering and humidity. The stone fits perfectly into almost any style of a private house.

We must not forget about the vinyl type of wall decoration, which is also often used to improve the appearance. The panels, which have a vinyl coating, consist of two layers. The first layer refers to a protective material that inhibits the constant impact of external factors. The second layer provides protection against physical and mechanical impact. On vinyl siding benefits such as:

service life exceeds 45 years;
no need for additional care or restoration;
resistance to corrosion and mold formation;
Fire safety;
can be mounted on any type of surface.

Facade siding technology

The technology for installing siding on the facade of a wooden house can be divided into two groups, such as:

installation work on the installation of the frame;
panel installation.

Crate for installing panels it is not always used, but only in cases where there are large drops or obvious irregularities on the surface of the walls of a private house. The frame is also erected if there is already a pre-installed cladding on the facade of the house. There is simply no point in dismantling it, because it will be cheaper and easier to install the crate on the old coating, although some advise removing it.

Usually, for the manufacture of the frame, you can use improvised materials in the form of planks and wooden boards. You can also buy ready-made aluminum strips for the frame along with fasteners. The guide rails should be installed perpendicular to the siding. The distance between wooden planks should be 400 mm, and between metal products 300 mm. Naturally, the installation of planks and the subsequent installation of siding create extra space between the finishing material and the wall surface, but it can be used to create heat and sound insulation.

After building the frame you can safely proceed to the installation of siding. To do this, follow these steps.

First you need to purchase aluminum nails, with a diameter of 3 mm and a length of 20 mm. Nails will be needed to attach the panels to the frame slats.
Installation of siding always starts from the central part of the wall and then moves in any direction until the very end. Then you can proceed to finish the second side, extending from the central part.
If the material is not suitable in size, then it can be easily cut with an electric saw. This will reduce the risk of panel deformation.
Siding, unlike other finishing material, cannot be fixed close to the wall surface.
After installing five rows, you need to check the design with a level.

It is important to remember that siding is only suitable for installation on old-style buildings or on houses that have already gone through the shrinkage stage. It is impossible to install this material on new buildings.

Necessary material when decorating a house with siding outside

When finishing with siding such tools are required, how:

For panel mounting on the surface of the house you will need material such as:

chamfers;
initial and hinged trims for finishing;
siding panels;
connecting strips;
slats for edging;
spotlights;
strips for the finishing stage;
corner elements for the inside and outside;
platbands.

It is worth noting that it will not be necessary to walk around the market in search of the necessary parts for finishing the facade of the house. The bottom line is that the siding is completed with all the necessary materials. All that is needed is to place an order, provide the company with the dimensions and type of the building, and then the specialists will already form a siding kit, which will include all the parts necessary for installation.

Although installing siding is quite simple, it’s still during installation mistakes can be made, which will eventually affect the appearance, quality and service life of the material.

First of all, it is important to remember that the panels have the ability to expand or, conversely, become smaller depending on the weather outside. Typically, changes in size during the year can vary within 1%. Naturally, during frost, the material narrows, and at high temperatures, the length of the siding can increase, so the material cannot be fixed during installation, it is too hard. When it expands, there is a chance of damage to the panels or deformation. Even if a breakdown does not occur, it still significantly reduces the life of the panels.

When finishing the facade of the house, it is important to remember that between the slats and the guide panels there should be distance in size 1cm. This will help to avoid deformation during its expansion at high temperatures. In order to reduce the chance of siding expansion, you can also install protection that repels direct sunlight and thereby prevents the material from heating up.

Facing the facade of the house is one of the main components not only of external attractiveness, but also of reliable protection of external walls from the adverse effects of natural factors: rain, snow, sunlight. In addition to the protective functions, the cladding of the house creates a good thermal insulation of the room.

Today, in the construction market, you can find many options for facade cladding. One of the popular types of finishes is siding. Do-it-yourself facade decoration with siding does not require special training, skills and abilities. A responsible approach, the right choice of material, strict adherence to the installation technology, as a result of which a high-quality facade finish will be ensured.

Varieties of siding panels

Before proceeding with the cladding of the facade of the house, you need to familiarize yourself with the varieties of siding panels and study the characteristics of the material from which they are made.

Steel

Steel siding is used for cladding industrial buildings and warehouses.

Advantages:

a large selection of colors and shades;
resistance to deformation;
durability;
not flammable.

Disadvantages:

periodically requires coating with an anti-corrosion compound;
dents from mechanical damage remain;
a large mass increases the load on the foundation of the building, which must be taken into account even when building a house;
high price.

Aluminum siding is used for cladding industrial and residential buildings.

Advantages:

light, strong and durable material;
does not fade in the sun;
a huge selection of colors;
acceptable price.

Disadvantages:

corroded;
deformations from strong mechanical impact are possible.

Wooden siding is mainly used for interior cladding of residential and office premises.

Advantages:

aesthetic appearance;
retains heat well.

Disadvantages:

fragility;
high price;
needs constant impregnation with special compounds to increase the service life.

cement

Cement siding is the latest technology for building facade cladding. Cellulose fibers are added to ordinary cement, thus, a sheathing is obtained that resembles expensive types of wood. A special pressing technology allows you to make this type of siding with any pattern. It is applied to a covering of industrial objects. For residential premises it is used in rare cases.

Advantages:

a huge selection of colors;
not combustible;
durable and strong.

Disadvantages:

large weight, which will create an extra load on the foundation;
complexity of material processing;
facade cladding will require not only special training, but also the use of respiratory protection equipment (respirators);
high price.

Vinyl siding is one of the most used types of finishes. The material looks spectacular and expensive, as it imitates many textures: expensive types of wood, stone, marble. You can also choose different colors and create an original pattern or picture.

Advantages:

simplicity and ease of installation;
reasonable cost;
reliability, durability (more than 20 years);
lightness of the material;
a huge selection of textures and colors;
can be sheathed on any type of surface;
the ability to replace multiple panels;
can be treated with various detergent mixtures.

Disadvantages:

vinyl panels do not withstand strong impacts and may crack.

Facade cladding with vinyl siding is the best solution for finishing the facade of a house. It is desirable that a specialized team was engaged in facing the facade. Poorly laid panels will allow air, moisture and insects to pass to the wall of the house, and this threatens to damage it. It is possible to sheathe the facade with your own hands, for this you need to prepare tools and materials that will help in the work, as well as read the instructions.

Tools and materials

Required tool:

measuring instruments (ruler, square, tape measure);
hammer;
rope;
screwdriver;
ladder;
electric saw for cutting panels.

Material:

outer and inner corner;
window strip;
H and J profiles;
starting and drain bar;
spotlights.

Stages of facade finishing

Before sheathing the facade with siding, it is necessary to strictly follow the installation technology, which consists of several stages.

counting

the area of the walls of the house (cottage);
wall dimensions;
size and number of window openings;
type of roof of a country house.

Having all the data for the calculation, you can independently calculate the required number of panels for cladding using the following algorithm: subtract the area of doors and windows from the area of \u200b\u200ball the walls of the house, divide the resulting number by the area of one siding panel. Multiply the result by 1.10. Thus, the panel area is calculated with a 10% margin.

Training

Prepare the surface of the walls. Clean them of pollution, remove unnecessary items (pipes, trim, window sills, etc.). Blow out cracks with mounting foam or seal with cement mortar. If the surface is wooden, then treat it with a special mixture (antiseptic).

crate

If the house is new, then the crate is not required. Provided that the house is old, it is necessary to prepare a crate for attaching panels. For the crate, wood or metal is used. Wooden crate is cheaper than metal. But the metal crate is more reliable and durable. For a wooden crate, slats that are pre-treated with an antiseptic are suitable. The iron crate is made of galvanized profile.

Warming and waterproofing

The next step is insulation and waterproofing. Styrofoam can be used as a heater. For waterproofing - a membrane. The first layer is a heater, the second is a membrane, and then a new crate is made.

Mounting

The siding is fastened with a gap between the end of the panels and the corners of 6–8 mm. Between the panels and the crate, it is also necessary to maintain a gap of about 2 mm to prevent deformation of the siding.
Before attaching a new panel, it is connected to the panel attached to the crate. The outer corner should close the joints of the panels.
Fasten planks of window openings and j-profiles, including in doorways. Lay the corners of the profiles with an overlap.
Install the H-profile in a vertical position, leaving a gap of 3–5 mm at the top and bottom.
Fasten the finishing bar under the roof of the building.
The first row of siding is attached to the starting bar, and is reinforced with a self-tapping screw at the top and in the middle at a distance of 35–45 cm. Installation of the following rows occurs in the same way.

The technological process of installing siding is not particularly difficult, so you can do it yourself.

Video

Detailed description of the stages of installation of siding:

Schemes

Correct installation diagrams: