How to make a fountain at home? Decorative indoor fountain with your own hands. Decorative fountains for home and apartment Homemade fountain from improvised means

Who said that a fountain is an exclusively outdoor fixture? Modern decorations of this type are used with equal success both outside the house and indoors - everything is decided by the size and device. For apartments and houses, as a rule, small-sized fountains are used, which are called "home fountain". It is about them, or rather about the options for their self-production, that will be discussed in this article.

A person can contemplate three things for a long time - for a long time he is not able to take his eyes off the flame, the flowing water and how someone else is working. It is for this reason that the most common decorations in houses and apartments are all kinds of fireplaces and fountains. In this article we will talk about fountains - together with the Dream House website, we will deal with the question of how to make a home fountain with your own hands? We will consider various options for the independent manufacture of this decor, and most importantly, we will deal with the principle of creating such things, the knowledge of which will allow you to independently design these products at home.

Do-it-yourself home mini-fountain photo

Home fountain: how it works

Most of you will probably be surprised at how simple a fountain is - you can even say that by the standards of modern technology this is an elementary thing that does not cause any difficulties in manufacturing. If you deal with its design, then it can be divided into just a few separate parts. Plus or minus, of course, since there is no limit to perfection, and you can improve it, as they say, to infinity.

As for the principle of operation of such devices, there is nothing special to understand here - the movement of the liquid simply loops. There is a container from which the pump pumps out water and delivers it to the fountain nozzles - flying out in the form of a beautiful decorative jet or flowing down a waterfall, it returns back to the same container, from which, again, it is sucked in by the pump and sent to the next ring cycle. That's the whole fountain.

How to make a fountain at home: options

Among the most common options for making home fountains with your own hands, you can select just a couple of more or less successful designs. To be honest, only one is completely successful - the first variation, although acceptable for a house or apartment, still has several significant drawbacks.

Depending on the required dimensions, you can also install intermediate containers - create a so-called cascade of waterfalls, which will look much more attractive. The principle of making such fountains is no different from a single waterfall - the only thing that is added here is one or more intermediate containers. In such a situation, the pump pumps water into the upper tank, from where it flows by gravity into the reservoir located just below. In turn, water will flow from this reservoir into a container located below - with this approach to business, the number of containers can be unlimited.

home fountain photo

How to make a home fountain with your own hands: installation without a pump

I’ll make a reservation right away that this is not a perpetual motion machine, and such a fountain will not be able to work indefinitely - this is an excellent toy that clearly demonstrates the work of the laws of physics and nothing more. Depending on the containers used in the design of such a fountain, you can count on 10, 15 minutes, maybe even half an hour of operation time - then you need to recharge, which you will get tired of doing in the very near future.

We are talking about, for the operation of which three containers are required, connected in series with each other by tubes - this is a completely sealed system that works thanks to an air lock. From the receiving bowl, water enters the lowest, and most importantly, empty container - it presses on the air in it, which, in turn, creates pressure in the upper container (it is filled with water). It is this pressure that causes the water to rise upwards. What is most interesting, the rise of the jet can be quite large and reach 1m in height. Moreover, this fountain can even be somewhat "automated" - to organize its recharging with less time and effort spent. Undoubtedly, this is a noteworthy invention of mankind, to which it is worth devoting a separate article, which we will do in the future.

How to make a home fountain with your own hands: Heron's fountain photo

In conclusion of the topic of how to make a home fountain, a few words about very attractive additions that will allow you to contemplate not only the view of flowing water, but also observe various effects. The very first thing that comes to mind here is . It can be organized in many ways, but the most interesting of them is the use of a small electric generator. A small appliance bought in a store is quite capable of making the LEDs glow - you can arrange them any way and anywhere, the main thing is not to forget that water and electricity are incompatible things in principle.

For those who want to update the exterior, make it special and memorable, we suggest using a small homemade fountain. The step-by-step instructions for making a fountain with your own hands are quite simple and anyone who has a certain set of tools and materials can create this beauty in their yard.

We install a fountain in the country

The first point of the fountain installation plan is planning its size and type. Consider the size of the yard, do not make the fountain too big or small - this will not give a positive visual effect. Remember, the power of pumping equipment is directly proportional to the size of the structure.

Now you have to choose right piece of land for installation. Firstly, the fountain should be located where it will be clearly visible. Secondly, it should be close to the place of rest. The sound of running water and cool freshness in the summer heat are important components of a pleasant and peaceful outdoor recreation. Try not to install the fountain in the open sun. Water will have to be changed frequently due to its flowering. There is also no place next to the construction trees, the roots can damage the thicket and for repairs you will have to disassemble the entire decor element.

To install a fountain with your own hands on the site correctly, do not choose places near the walls. In this case, the structure will not avoid acquaintance with mold and fungus. And this, in turn, will not only spoil the appearance, but also cause an unpleasant musty smell.

Plan ahead for future buildings on the site. Do not install a fountain on the road to them.

Do-it-yourself step-by-step guide for installing a fountain in the country

Let's talk about how to make a fountain with your own hands using the example of a very simple design - fontanel fountain. This type of building has several advantages:

Effective appearance;
Easy care;
Easy access to parts for the purpose of repair;
The possibility of parsing for the winter.

Having picked up a place for installation, we dig out foundation pit slightly larger than a fountain bowl. Additionally, a shallow hole should be dug around it. gutter(about 10 cm).

Do-it-yourself fountain. Instructions in the photo

At the bottom of the pit should be sand cushion 15 cm thick. This will protect the underground part of the structure from plant roots. We level the surface and install on it plastic bowl. We set the font according to the level, pour and ram the sand. The container should be installed in such a way that its edges protrude by 5-8 cm.

The next step is to fill the plastic container under the bowl with water. It is not necessary to pour “with a slide”, leave 4-6 cm to the edge.

Now you need install a fountain and check the operation of pumping equipment. If power pumps can be adjusted, then we adjust so that the water falls back into the bowl. Approach to the choice of equipment should be very careful. Ideally, at the time of purchase, explain to the seller what bowl size and bowl volume is expected. Then he will help you choose the equipment of the required power.

Do-it-yourself fountain. Instructions in the photo

After installing the bowl and pump, you need to do waterproofing fabric. Cut out the canvas with a diameter of a hole for the fountain. Starting from its center, cut into strips. This must be done so that the diameter of the resulting inner circle is equal to the diameter of the bowl of the structure. We bend the resulting strips of material and lower them into a container. You can fix them with a sealant. Do-it-yourself fountains always require a lot of patience and accuracy in work, especially this stage of construction.

So that the base of the structure does not lose its shape and is stable, we put a couple of rods on the sealed fabric fittings, and on top of them - galvanized fine mesh. The cell size will affect the size of the stones or rubble used. used in the decor of the fountain.

Do-it-yourself fountain. Instructions in the photo

The final stage of construction - decoration designs. The border of the fountain can be laid out with larger stones, but you should not make it too clear. Small stones like sea pebbles or gravel are laid out on the grid. If you want to add a natural fountain, then its boundaries should not be too clear. Various plants will look good along the edges of the structure.
Thematic japanese fountainfor lovers of oriental exoticism, it is installed in a similar way. A step-by-step instruction for making a Japanese-style garden fountain with your own hands consists of the same points. You will find a diagram of the structure below.

Do-it-yourself waterfall fountain

We will not build anything grandiose, but small, about 1 m high, cascading waterfall we are quite capable. It has already been described in detail above how to prepare a foundation pit for a pond bowl. But this time we are building a waterfall. And if there is no natural elevation for him, he will have to create it himself.

Do mound convenient in the process of digging a pit. We just throw off the ground where the hill should be, and carefully ram it. For the hose supplying water to the point where the water falls, make a small groove in the wall of the pit and embankment.

Do-it-yourself waterfall fountain. Instructions in the photo

After the foundation pit and the base of the waterfall are ready, we begin to cover the bottom and walls of the mini-pond waterproofing material(for example, PVC film). It is necessary to lay the canvas in such a way that it not only completely covers the bottom and walls of the pit, but also protrudes about half a meter on the sides of the pit.

Be sure to lay a pipe for supplying water to the top of the waterfall in a pre-prepared channel-ditch. Bend one of its edges 30-40 cm up.

This time we are making a permanent structure, and therefore it is best concrete pond bowl. To begin, carefully lay out metal mesh at the bottom of the pit. Do not allow the waterproofing to be damaged. Next, pour a layer of concrete with a thickness of about 12-15 cm.

How to make a fountain in the country with your own hands. A photo

Now you need to prepare bowl walls. We lay out the grid, strengthening it in a solution that has not yet hardened. You can continue to install a fountain with a pump with your own hands, which will look like a cascading waterfall, in a day. We fill the walls of the pond bowl and finish the most difficult stage of construction.

The next part of the build is decoration the resulting structure. We build steps on a pre-rammed hill. The step should be about 30 cm and three ledges will be enough.

On the resulting smooth surfaces lay out flat sandstone, pebbles or any other material you like. We decorate the rest of the fountain, including the film around the perimeter, with stones, rubble, marble or other pre-prepared materials.

It remains only to turn on the pump and fill the font of the structure with water. We observe how the stream falls steadily down the steps of the waterfall and enjoy the originality of our suburban area.

DIY stone fountain

How to build stone fountain? We will talk about this right now. First you need to take care of the availability of all necessary devices and materials. We will need:

Water pump (underwater with medium power is suitable);
Plastic container for a bowl;
Tube made of metal or PVC for holding an electric cable;
Coupling;
Flat stones and gravel;
Bars of wood;
Water flow power regulator;
Copper tube with a diameter of 15 mm.

foundation pit for the bowl of the fountain should be a little more than the capacity prepared for these purposes. By filling the space between it and the walls of the pit with soil, we will significantly strengthen the position of the bowl. As in previous cases, do not forget to create at the bottom of the pit sand cushion. Lay a layer on top pebbles.

Water pump located freely in the water tank. This will make it easier to repair it if necessary. From debris, the water tank can be secured by a simple fine mesh. To give structural strength on top of the metal mesh are placed wooden bars(if desired, they can be replaced with metal fittings).

The base of the fountain will be metal pipe which is attached vertically to the pump.

The next step is preparation flat stones. To do this, using special tools, we make holes with a diameter slightly larger than the diameter of the metal pipe - the base of the structure.

Further, according to the principle of the children's pyramid, we “plant” the stones on the pipe. It remains only to add decorative elements to the fountain and connect the pump. A very simple, but spectacular and beautiful do-it-yourself fountain in the country is ready for use.

A variety of do-it-yourself fountains on personal plots

Submersible fountains

If there is already a pond in the yard, then it can be used as a basis submersible fountain. The principle of its work is simple. Water is supplied by a pump directly from the pond. In this case, to install a submersible fountain, you will need:

Pump;
Pipe for water supply;
Appropriate nozzle for shaping the water jet and setting it in the right direction.

Nozzles are very different. For instance, bell nozzle is a two-disk design. The flow of water passes between them and changes when the gap is adjusted. Nozzle " geyser” - a tube narrowed to the top - quite effectively copies the corresponding natural phenomenon.

Such structures have quite a lot of possibilities. For example, you can create the effect of a key beating out of the ground. To do this, do-it-yourself fountain is mounted in such a way that the end of the pipe does not protrude above the surface of the reservoir.

Using more complex nozzles, you can significantly expand the possibilities of decor. The effect of spraying water, the simultaneous combination of several nozzles and many other variations for the choice of those who design a fountain in their country house.

Stationary fountains

A fountain of this type is a real find for lovers and professionals of design art. Structures can take the form of natural stone fonts, antique structures; they are made from clay pots, plastic bottles and any material that is at hand. Fountains for Japanese gardens are especially popular recently.

Any frost-resistant material will do: marble, artificial stone, sea pebbles, etc. To decorate such fountains, they often resort to painting. There are two ways to do it:

Staining of the material before the manufacture of the structure;
Painting of the finished figure.

The first option is much more expensive, but it is also much more reliable. To protect against moss, fungus and mold, it is useful to treat the fountain structure with special means.

Small stationary fountain will look good in family recreation areas or close to playgrounds. Our master class "Do-it-yourself fountain in the country" will help novice designers to correctly build, perhaps, one of the main elements of decor in a suburban area. And it doesn't matter if it's a small fountain-geyser or a large-scale cascading waterfall 2 meters high. The main thing is that he pleases the owners and does not cause problems.

Video instructions for making a fountain in the country

Having made an indoor fountain with your own hands at home, you can not only save a fairly large amount of money, but also acquire a useful interior decoration. According to the Chinese teachings of Feng Shui, the symbol of Water, placed in the northwestern part of the dwelling, provides prosperity to the family. A babbling brook, a cascade of waterfalls or another form of a fountain can become an excellent personification of the moving elements in the house.

Small decorative cascades for decorating the interior should be made taking into account the fact that there is nowhere to drain the constantly arriving water at home. This means that the amount of liquid that is in the system must be constant. To comply with this requirement, the fountain installed in the room must be made working in a closed cycle. In this case, water will be collected in a storage tank. The pump installed in the system must raise it to the upper point of the structure, from where the liquid will pour out, again falling into the tank.

In order for a thin stream to flow down, drip or beat up beautifully, decorative obstacles should be made of shells, stone, shards or other objects on its way. In ancient China and Japan, specially trained craftsmen built a channel for a stream so that it murmured beautifully. The tuners of the "music of water" created real masterpieces from ordinary pebbles, stacking them so that cascades with recesses formed into which drops and streams fell, producing the noise characteristic of a stream or waterfall.

What to prepare for work?

To create a mini fountain, you need to choose the right pump. Its power depends on the height to which you need to lift the liquid. This value is dictated by the dimensions of the structure and is determined individually. If you want to make a fountain with your own hands so that the jet of water shoots up, it is better to buy a pump with more power and a regulator. To assemble a small tabletop cascade, an aquarium water filter pump is enough.

Before you make a fountain with your own hands, you need to prepare:

a tank into which water will flow;
silicone tubes;
waterproof glue;
materials for decorating the product.

The bowl of the reservoir must be capacious. In addition to its direct function - collecting the liquid circulating in the system - it will also serve as the basis for a composition made of stone or other materials. Some of them can be placed directly in the container.

What if there is no pump?

A low-power pump that can raise water to a height of about 20 cm can be made independently. For this you need:

a motor from a children's toy, camera or other, protected from water;
batteries (from the phone or finger);
charging connector if using a mobile phone battery;
LEDs - optional;
switch of any type;
electrical wires;
plastic gear;
small round container (aerosol cap, plastic bottle);
waterproof adhesive.

From a gear from an unnecessary mechanism, make an impeller for water supply: fit the wheel to the diameter of a round container, glue 4 pieces of plastic crosswise on the shaft: fig. eleven). Drill a hole in the bottom of the tank for the motor shaft, and in the side for water. Drive the motor shaft inside the tank, glue the motor housing to the bottom of the pump tank from the outside, and fix the impeller on the shaft inside (2). Cut off a piece of plastic, make a small hole in it, seal the open part of the pump housing. Attach a tube to the hole in the side and seal the connection (3). Lead the wires to the motor and carefully insulate the connection, protecting it from water. Any sealant will work for this.

To install the connection of the motor to the power supply, use the diagram (4). It is important to remember that the batteries must be inaccessible to moisture. You can fix them on the outside of the pool, and glue the switch here.

You can include a resistor in the circuit to adjust the speed of rotation of the motor or LEDs for decorative lighting.

Assembly Method

A homemade or purchased pump must be attached to the bottom of the tank (storage tank). Its depth should be such that the pump is completely submerged in water. You can hide the pump in different ways: place a mesh cover on top of it, on which pebbles or shells representing the bottom of the reservoir will be laid, or hide it inside a large decorative element. One of the design options - a dry fountain - provides for a completely hidden surface of the water in the reservoir. To do this, you need to lay a grate on top of it and fix the stones. The water will pass through the stones into the container without forming a visible pool. Rice. 2.

How to make a mini fountain in an apartment with your own hands from ceramic pots (Fig. 3), a small master class will tell:

1 Prepare 2 ceramic pots and 5 trays (2 large and 3 small). Cover them with waterproof varnish, drill a hole for the tube in the center of 1 larger and 1 smaller pallet. Make cuts on the edges of the pallets to drain water.
2 Install the pump at the bottom of the tank, following the diagram in the figure. Close it with a large pot, and bring the tube through its drainage hole and drilled holes in the pallets to the very top of the structure.
3 Place a smaller pot next to it and attach the tray to it. The next tier consists of 2 small pallets (one is upside down and serves as the base for a bowl from the other). Pallets should be placed so that the holes sawn into their sides allow water to overflow from one to another, forming a cascade.
4 Decorate a fountain, assembled with your own hands from the simplest materials, with beautiful pebbles, plants and shells, figurines of aquatic animals or birds.

Such a miniature pond can be put on the table or given a special corner among indoor plants. Overflowing water will not only enliven and decorate the composition, but also allow you to slightly moisten the air.

Waterfalls in the room

A stylish and fashionable interior decoration is a vertical waterfall (Fig. 4). Making this kind of indoor fountain with your own hands is not much more difficult to make than a desktop mini fountain. The only difference is the power of the pump for such a large structure. When looking for a pump, you need to pay attention to the fact that the height of the water column is at least 1.8-2 m. This will make it possible to arrange a water wall or a stream originating under the ceiling of the room.

Before you make a home waterfall, you need to waterproof the floor in case the tank leaks. For this, polyethylene film can be used. It is advisable to close with it a section of the floor 15-20 cm larger than the perimeter of the future structure.

For the panel on which the water will flow, you will need:

thick glass or mirror;
bars 5x5 cm for support posts;
boards for the base of the top cover;
plastic pipe with a diameter of 2 cm for distributing water over glass;
a bar or thick board for the latch step.

The device of the fountain supply system is the same as discussed above.

On top of the fountain tray, you need to install and fix a board with an emphasis to fix the glass in a vertical position. Knock down the frame from the support bars and the crossbar from above. The horizontal bar of the top cover can play the role of the crossbar.

A piece of plastic water pipe, the length of which is equal to the width of the glass panel, is drilled in one line along the axis. The holes should not be spaced too far apart to give the impression of separate trickles. Plug one end of the sprinkler tube, fasten it to the top cover bar. Set backlight if needed.

Place the glass panel vertically, resting the lower edge against the step of the latch. Attach the side parts to the support bars with liquid nails. In order to prevent water from spreading outside the panel, it is necessary to glue sides made of strips of glass, wood, and plastic on its edges.

Install the pump in the pan, run the water supply tube up to the open end of the distribution pipe. Connect, seal the connection. Attach the front part of the top cover. Make a decorative finish for a home fountain with your own hands to your own taste. Through the many holes in the sprinkler pipe, water jets will fall on the glass and flow down it into the pan, creating the illusion of a falling stream.

Materials for decorative finishing of indoor fountains, made by hand in desktop or floor versions, can be found in pet stores (colored soil, castles, shells, ships in the aquarium department). Flower shops sell bamboo plant supports and beautiful containers. In the souvenir departments you can find artificial bonsai, figurines of birds and animals.

There is nothing more pleasant than to relax after a hard day under the quiet splash of water in a man-made stream. The decorative functions of the fountain are perfectly combined with its main purpose - to humidify the air in the room. In addition to the jets of pouring water, you can make live indoor plants.

Decorating the site is a favorite pastime of summer residents and homeowners. Beautiful flower beds, flower beds and even beds are a true decoration. However, nothing is more pleasing to the eye than ponds and ponds, surrounded by beautiful vegetation. And if a stream of water still beats out of it, then the corner turns into the best place to relax. If you still manage to make not only a fountain with your own hands, but also beautiful lighting, put swings or benches nearby, in the evenings all the inhabitants will gather on this patch.

This fountain is handmade, as is the lighting: waterproof LED light with remote control to change color

Fountain device

To make a fountain in the country does not need very big expenses. Of course, it all depends on the size of the reservoir and how you imagine it. According to the method of construction, fountains are of closed and open type. It is about the cycle of water use. The closed type uses the same volume of water, driving it in a circle. Open - all the time new. Garden and country fountains are made mainly of a closed type: their device is simpler and more economical. Of course, water has to be topped up and periodically changed - it evaporates and becomes contaminated, but still, the costs are not very high.

When installing an open-type system, you will have to think over the water supply system, its level control, drainage and discharge. You can, of course, use the fountain tank as a container for heating water before watering, and make wiring around the garden from the bowl, but watering is not needed around the clock, and the fountain can work in this mode.

In the simplest version, to make a small fountain, you need some sealed container and a submersible pump. Any container can be adapted - a special plastic one for a pond, a barrel, an old bathtub, a basin, a cut tire covered with foil, etc. Pumps are a little more difficult.

Fountain pumps

Fountain pumps are sold special, with built-in filters. To make it easier to make a fountain with your own hands, you can buy such models. It is very easy to work with them: put them in a container, fix them so that they do not move, fill them with water, carry out the starting manipulations (described in the instructions) and turn them on.

Fountain pumps come in different capacities, raise the jet to different heights. Often included are interchangeable nozzle nozzles that change the nature of the jet. They are powered by 220 V, there are models powered by solar panels. Made hermetically, so there will be no problems when connecting, step-down transformers are not needed. The only thing that does not interfere is the machine and the RCD on the line to which the pump will be connected. This is just in case, to increase security. The price of the smallest and low-power fountain pump is $25-30. Performance models cost several hundred or more.

You can use any submersible pump for the fountain. But to it you need to buy or make (you can make sand) and a step-down transformer. A security group from an automatic machine and an RCD on the line will not be superfluous here either. This circuit is worth fiddling with if you have an old pump that is not currently in use.

How to do without a pump

Is it possible to make a fountain without a pump? Yes, but open type. For example, bring a water pipe into the pond - central or. The water coming out under pressure will give a jet of some height. By installing a tip on the pipe, we can change its shape. But with such a construction, it is necessary to figure out where to divert water. You can - back to the well or to the river, to the area for irrigation, etc. Although a pump is present with such an organization, it pumps water into the house, and the fountain is only one of the flow points.

The second option is to put some kind of container at a height, supply water to it, and from there it is fed through pipes to the fountain located below. To create a more or less decent jet height, the container must be raised by 3 meters or more. But the question remains: how to supply water there. Again with the help of a pump, but no longer submersible. They are cheaper, but require a filter. You will also need a pit in which the equipment is installed. A system of pipes connects it with the bowl of the fountain.

In this area, everything has become easier with the advent of LEDs. They are powered by 12V or 24V, which is much safer than the regular mains. There are even solar-powered lamps.

Lighting can be done using waterproof or the same spotlights and lamps. To power them, you need an adapter that converts 220 V to 12 or 24 V, but they are usually sold in the same place as LEDs, so there should be no problems. Installation is simple: spotlights have mounting brackets, the tape can be “shot” from a stapler, only the brackets need to be found larger than the size of the tape: it is unnecessary to punch it so as not to violate the tightness.

There are LEDs that change color. Shades from 8 to several thousand

Schemes of fountains of various configurations and photos of their design

Surely you know that the main component of the fountain is its bowl. In fact, this is the same pond, but with additional equipment - a pump. A pond can be made in at least a dozen different ways, and some of them are described in a separate one, because we will not describe how to make a pool bowl. We will pay maximum attention to the organization of fountains and their decor.

small fountain

The device requires a container and a pump. A decoration is put on the tube that comes from the pump. These can be stone slabs in which it is necessary to drill a screw, with a diameter slightly larger than the diameter of the pipe. These plates are strung one on top of the other like a children's pyramid.

Scheme of organizing a decorative fountain for a summer residence

To avoid water overflow, it is necessary to provide a drain system - just below the maximum level, insert a pipe into the container, the second edge of which should be connected to the sewer, drainage system or garden. You can do it differently: arrange a water collector around the bowl - make a concrete groove or dig in a plastic one. Collected water is also taken somewhere. Usually in closed systems, the problem is not overflow, but a lack of water - it evaporates, but you can play it safe.

Do-it-yourself fountain: photo report 1

And now a photo report of how a do-it-yourself mini-fountain was made according to this scheme. It turned out interesting.

To make this fountain you need:

square plastic flowerpot without holes;
small fountain pump;
plastic pipe 0.7 m long, diameter such that it is put on the pump outlet;
a bag of decorative pebbles;
three bricks;
sawn red granite on slabs.

From the tool - a drilling machine to drill holes in granite with a diameter slightly larger than the diameter of the pipe.

We install a bowl in the prepared hole, put bricks in it, closer to the edges. They are needed for the stability of the structure and in order to reduce the amount of pebbles. They also serve as a support for the stone structure. Between the installed bricks we put a pump with a tube put on, pour water and check how it works.

Holes were pre-drilled in the slabs in the workshop. They should be located approximately in the center so that the stones do not overturn the structure with their weight.

The first plate rests on the lying bricks, the rest are strung so that the center of gravity does not shift. Having laid the first, we fill the remaining space with pebbles. After the last piece is laid, a mark is made on the pipe. The very last stone is removed, the pipe is cut down just below the mark, then the last fragment is returned to its place. When the water is turned on, it looks like it is running straight out of the stone. Very unusual and easy.

Photo report 2

The next version of a small fountain is made according to the same principle, only a flexible hose is used instead of a pipe, and a snag is used instead of a stone. The effect is just wonderful.

Everything is so clear that there is no need for comments. It differs from the previous design only in the presence of a grid. This is to increase the volume of water: the pan is small.

Until you see it, it's hard to imagine how easy it is to make things of amazing beauty. As for pipes - it is better to use polyethylene pipes - they bend well and are not afraid of ultraviolet radiation.

How to make a fountain out of a tire, see the video report.

Room or desktop

Mini-fountains are made according to the same principle, only pumps use very low-power ones. Suitable even for aquariums, but without aeration. They even work almost inaudibly. We will make a fountain in the Japanese style. In addition to the pump, you will need a small ceramic container for this. In our case, it is oval made of baked clay. A piece of bamboo - about 70 cm long (bought at a flower shop, sold as a support for climbing plants), a bunch of living growing bamboo and some small pebbles. This is what beauty comes from.

First of all, we cut a piece of bamboo into pieces of different lengths. It is hollow inside - these are natural pipes, which, moreover, do not rot for a long time. One of the sides should have an oblique cut, the second - even. Sawing so that the longest piece near the evenly cut end has a “joint”. The lower incision goes about 5 mm below this thickening. It’s just that there is a partition inside, with its help it will be easy to put this segment on the pump outlet. It is difficult to cut, but it was possible to saw through a thin trunk with a metal blade.

We put a small pump in the bowl, put on it the longest piece of bamboo - its length is about 35 cm. On the other hand, we put a bunch of live bamboo, fill the space between them with pebbles.

We tie the remaining two pieces of dry bamboo to our "pipe". You can use hemp rope. That's all, we made a mini-fountain with our own hands. It remains to fill the water and turn on the pump.

By the same principle, other models can be made. Now you understand how and it will be easy to change the design. A few photos for inspiration.

Another type, more traditional and familiar to us, uses almost the same idea and the same tools. Difference in design. You can take a large ceramic or even plastic pot. It is only important that it be without holes for drainage. Then it’s a matter of technique: divide it with a plastic partition into two or three zones, pour more soil into one and plant one of the moisture-loving plants.

The second part will be the reservoir. Only when organizing circulation, multi-stage filtration is necessary: water is very polluted. Therefore, cups made of filter materials with different cells are inserted one after the other - first, a wire or plastic mesh, then a cloth with a different cell, and inside this design is a small pump.

You can make your own hands not only the composition of such a table fountain, but also a pump. How? Watch in the video.

Pebble fountain

A very interesting design at the fountains with pebbles. Their bowl is disguised so that it looks like a dry fountain without a bowl. In fact, there is a bowl, but it is decorated with pebbles, which are laid on a grid that covers the tank.

Dry pebble fountain - device diagram

A certain container is installed in a dug pit. Its volume and dimensions should be quite decent: to collect all the splashes, or at least most of them. A pump is placed in the container, covered with a metal or plastic mesh with a small cell on top. It serves to protect against the ingress of large contaminants into the water, and a thick wire mesh can be laid on top of this fine mesh. This is if you use pebbles. If you will be laying stone slabs, you can use boards or bars.

How to make a "dry" fountain with your own hands

With pebbles, it is probably better to do the opposite: first, lay a grid with a large cell as a base, and on it with a small one. So you don’t have to suffer with the choice of large pebbles, and garbage will not get into the water.

Rockery with a source - this fountain may look like this

If you turn on fantasy, you can come up with very interesting compositions on this basis. For example, one of the options with a garden watering can. If yours is in a classic style, a fountain from a watering can is unlikely to fit well, but in a country style it is very much so.

As you can see, water is collected in the same vessel, hidden under pebbles, and from there it is pumped into a watering can with a small pump.

Near the wall

This is a classic option - a small or large trickle of water runs from the wall, flowing into the bowl. As you may have guessed, there is a pump in the bowl that supplies water through a pipe to the water outlet point. It's simple if you know how. It's just a matter of implementation and decoration.

In order for the pump to float, it is screwed to some kind of heavy plate. At least to the sidewalk, as long as the size fits. The case usually has corresponding mounting holes, but you should pay attention to this when choosing.

If you plan to do something similar near the wall of the house or fence, take care of its waterproofing. Even if the water does not flow down the wall, splashes will fall on it and the humidity will be high. At a minimum, it is necessary to coat several times with a hydrophobic composition. Try to find one that doesn't change the color of the surface too much.

The design style may be different. At the top bowl make a flat surface from which water flows down the wall. The effect is very interesting. It is important that the surface from which the water falls is mirror-smooth and absolutely horizontal.

fountain cascade

Iridescent jets look very interesting. Fountains of this type are called cascades or cascades. With this organization, water is poured from one bowl to another. In the case of a country or garden fountain, you can come up with interesting shapes. For example, a fountain made of buckets, watering cans, kettles and even old garden carts.

The principle of organizing such a cascade is simple: several vessels or bowls fixed one above the other so that a stream of water falls from one to another. Below is the largest tank, and which is the pump. It delivers water through a hose to the uppermost of the vessels.

How to make a fountain bowl

If you need a classic shape - a round, square or oval bowl with a jet of water - the easiest way is to find a suitable plastic tank. They are of different shapes and volumes - from tens of liters to several tons. They are mostly black and blue in color. Although it seems that for our purposes it is better to take blue, keep in mind that pollution is more visible against such a background. So that your fountain does not seem like a swamp, you will have to clean such a bowl often. From this point of view, it is more practical to take black - the water looks the same, but it needs to be washed less often.

The selected tank can either be buried flush with the ground level, or a side can be left. Most often, the sides are decorated with stone or pebbles. Depending on this, choose the depth of the pit. It is dug out in size a little more than a bowl.

When the required depth is reached, all stones, roots, snags are removed, the bottom is leveled, rammed, sand is poured, with a layer of about 10 cm. It is well leveled and spilled so that it is compacted. Put a bowl on the prepared base, fill it with water. Sand or soil is poured into the gap between the walls of the bowl and the pit. Sand - if the soil is clayey, and the soil - if it drains normally. Having fallen asleep a small layer, it is compacted - carefully, with a pole or a deck, falling into the gap to be filled. But no matter how well you compact, be prepared for the fact that in a couple of weeks you will have to add more: the soil will sit down a few centimeters.

You can do without a plastic bowl. There are two other options: make the tank out of cast-in-situ concrete. In this case, you can make a fountain with sides. The process is long and costly, and even waterproofing needs to be taken care of.

The cheapest option is to dig a pit and lay it out with a film. In principle, any high-density polyethylene will do, but it will last a year, maybe two. Then she starts to let the water through. Special films for pools are more reliable in this regard, but they cost decent money, but they can be used for years. The manufacturing technology of such a bowl for the fountain is captured in the photo.

The first stage is digging a pit and leveling the walls. After the required shape and dimensions are reached, the horizontal platforms are leveled and covered with a layer of sand. It will protect the film from possible damage.

We lay the film in the finished pit. Inside, it should lie without tension, freely. Its edges are covered with soil, pressed with boulders. To prevent the germination of plant roots through the film, it is not advisable to spread it under. This non-woven fabric is very tear-resistant. It is used when laying roads so that the soil is not crushed and trees do not sprout. So she protect the fountain without difficulty.

Boulders are laid out on the laid out film. If the pit is stepped, boulders should lie on each step. When the design of the bowl is almost completed, the pump is placed. The bowl is filled with water and tested - and the bowl for tightness and pump performance.

Each owner of a suburban area seeks to make his home and the space around it as comfortable as possible and at the same time beautiful. After all, a well-designed landscape design is not only a decoration of a summer cottage, but also a harmonious combination of different zones in one area. How nice after a hard day to have dinner in the gazebo with your family or relax on a bench in the hot summer, enjoying the coolness of the fountain. It is about him that we will discuss in our article, and more specifically, how to make a fountain with your own hands.

Advantages

Most would agree with psychologists that the sound of water has a calming effect on the nervous system. A person watching the flow of water internally relaxes and gains emotional balance. You can sit for hours at the fountain, watch its play and splashes, think about your own.

There is nothing complicated in the design, so almost anyone can install a fountain in the country with their own hands - you just need to have the desire and the necessary materials. We will also consider the latter in our article.

The incomparable advantage of the fountain is that it can be an excellent addition to the landscape design of any suburban area. In addition, a home-made fountain with the right lighting will become your guests' favorite vacation spot.

Depending on your preferences and the general style of landscape design, the design of the fountain is also selected, but also consider the size: if the area is small, then you better install a small garden fountain with your own hands.

How it works?

The device uses the principle of circular water supply. In other words, initially a certain amount of water is poured into the reservoir (bowl), which, using a pump, then circulates throughout the entire structure. Above the surface of the bowl there is a nozzle to which water is supplied. To prevent the bowl from overflowing, a special device is installed in it that regulates the amount of water.

This is a generalized diagram that describes the simplicity of the design. Therefore, by installing a fountain in the country, you do not need to think that water consumption in the area will increase. Simply fill in the required volume of water once and from time to time only check the degree of contamination. Although the pump has a filter, the water should still not be too dirty.

Choose a place

Of course, before you install the fountain with your own hands, you must at least visually determine the most suitable place for it. And even better - draw a plan in order to have a specific idea of \u200b\u200bthe location of the structure and take into account all the nuances in advance. Here are some practical tips for choosing a location:

The structure should be visible from any point on your site and not block the paths.
If there is a gazebo or a summer kitchen on the territory, then a cozy do-it-yourself fountain will be an ideal addition to such a recreation area. If you have a playground, then you can make a mini fountain nearby with your own hands - children will be happy to splash in it in the summer.
Study the relief of your site and find a low-lying place - it is best suited to install a fountain on the site with your own hands - in the warm season it will be cool and comfortable here.
The presence of trees nearby will not have the best effect on the operation of your fountain - the roots can damage part of the structure underground, and the falling leaves can clog the water. At the same time, too open space in direct sunlight can cause the water to “bloom”.
It is best to install the structure away from the house, as gusts of wind can carry the water jet to the side, from which the walls will be constantly wet.

Varieties

Surely, many noticed that the fountains outwardly differ from each other not only in design, but also in design. Some are made in the form of reservoirs with nozzles, others - on a stand in the form of jugs, statues and other devices from which water flows.

Accordingly, fountains are of two types:

submersible;
stationary.

The first option has a simple design and is often found in suburban areas and even in homes. To make a similar home fountain with your own hands, you will need a bowl, a plastic pipe, a pump and a nozzle.

Stationary have a more complex design and pompous appearance. Such devices can often be found in city parks and squares. For this option, you already need to lay the foundation, since the body is made mainly of stone or marble - durable materials that are resistant to aggressive weather conditions.

For a large area of ten to twenty square meters, a large stationary fountain is suitable, for a small area, it is best to install a submersible one. Well, the style of landscape design also dictates its own rules: for a Japanese garden, for example, a submersible type is suitable.

Construction design

As we noted earlier, the style of design also plays an important role. After all, all elements of landscape design should complement each other and be in harmony with each other. The most common option is the classic submersible jet fountain. Its construction does not require large financial and physical costs, and it will look advantageous in any design. Especially if you want to supplement an artificial reservoir with it. If you want to see options for how do-it-yourself fountains can look like, we presented a photo idea at the end of the article.

The shape of the bowl is most often symmetrical - it is either a circle or a square. Along the edges, you can lay out a decorative stone or pebbles, add greenery. Only plants must be moisture-loving, otherwise the appearance of the composition will be hopelessly spoiled by rotting plants.

Necessary materials

Before you make a decorative fountain with your own hands, you should take care of the materials and tools for construction in advance. If you want to make a stone fountain, then you will need the following materials:

smooth rounded and flat stones of different sizes;
gravel or crushed stone for drainage;
bowl for water;
water pump;
copper tube;
clutch;
plastic pipe of small diameter;
silicone;
boards to strengthen the structure.

In accordance with the above materials, you will need tools:

hammer;
jigsaw or small saw;
scissors;
fum tape;
drill;
sliding key.

Depending on the desired decor method, additional materials and tools may be needed. Here you can orient yourself according to the situation or make a list of necessary items for work in advance so as not to be distracted in the process.

Pump installation

Undoubtedly, the main and important part of the whole structure is the pump. If you are a beginner and still do not know how to build a fountain in the country with your own hands, listen to our advice: you need to approach the choice of a pump thoroughly. First, consider the volume of the bowl - the larger it is, the more powerful the pump will be. The presence of a filter will protect it from various debris and extend its service life.

There are two types:

surface;
submersible.

The first type is installed on the surface, but in no case above the water level. This is where the principle of communicating vessels comes into play.

It is advisable to install a submersible pump not at the very bottom of the bowl, but at some elevation - then the sediment will not enter the filter. Keep in mind that the pump will consume electricity, so make the necessary communications in advance and provide a safety shield.

Even if it is not possible to install an electric pump, do not be upset - then we will tell you how to make a fountain in the country without it.

Design without pump

Without a submersible pump, you can make an open fountain. If you have a well with a pump on your site, then you can bring this water through the pipe into the fountain. The only thing you will need to decide on the place of water flow - for example, you can turn on the fountain and water nearby plants at the same time.

Thus, you can create mini garden fountains with your own hands at several points on your site.

External design

Of course, you should not forget about the end result of your work. The appearance of the finished structure should be pleasing to the eye, and the backlight will allow you to enjoy the beauty of the fountain in the evening. Here are some decorating tips for you:

You can use a variety of nozzles: the shape of the jet will depend on their shape. It can be in the form of a dome, an umbrella and even a geyser.
Properly selected lighting will add zest and mystery to the reservoir. Light sources can be installed not only around the perimeter of the fountain, but also under water. And it is not at all necessary to use standard options - the multi-colored glow of water will definitely fascinate any viewer.
Use flowers and shrubs to decorate the pond - thanks to them, the impression of a truly "paradise" corner will be created.

We offer you to see how beautifully decorated do-it-yourself garden fountains, photos of which are below.

Ideas and important little things

There are many photos of country fountains on the Internet, methods of their construction are described. You can also find enough information on how to make a home fountain with your own hands. Yes, yes, such mini-devices look very original and complement the interior. Such designs are especially popular among supporters of Feng Shui. Of course, the process of their construction is much simpler and cheaper - and the dimensions are quite small.

If you still have a desire, but do not know how to make a fountain at home, we will help you make the right choice and give some useful tips:

If there is no space on the site, the fountain can even be made at home - in the hallway, for example, or in the greenhouse. Its dimensions can be completely different - depending on your desires and the available space.
A submersible fountain can be made from improvised means - an old cast-iron bath or a bath cut along a car tire, a large flower pot, a wide basin can serve as a bowl.
The stationary version can be made in the form of a jug, bottles, stones, in the middle of which there is a water hose - this is also a great option for a home-made design.
The fountain does not have to be placed separately - it can be part of a wall or landscape composition.
The fountain-cascade belongs to the stationary type, and has an undeniable advantage - such a structure can become the fruit of even the wildest imagination. The matter can be limited not only to traditional pots, from which water pours and overflows, but also to entire structures in the form of garden carts, samovar teapots, watering cans with buckets, etc.
Fountain elements can be painted in various colors, often using special compositions for processing to avoid the appearance of moss and mold.

And, of course, do not forget about leaving - with the onset of cold weather, the fountain must be turned off, the water drained from it and the entire structure covered with a film before the onset of heat. In this case, your little country oasis will delight all households and guests with its joyful murmur for many years to come.

Photo gallery

We bring to your attention a successful selection of 30 do-it-yourself fountain design photo ideas.