Currently, such a coating is increasingly used for walls and ceilings. The bottom layer or the base of the wallpaper is paper, the top layer is vinyl, which has protective functions and gives the walls a beautiful look. How to glue vinyl wallpaper on a paper basis, is discussed in the proposed article.

Vinyl wallpapers are:

In the manufacture of material on the substrate is applied a vinyl layer by spraying or sticking a film.

• The stamping is done.
• Printed picture.
• It can be foamed.

The coating can be hot stamped. In this case, after foaming, the top layer rolls around with two rollers: one presses the material, the other - embossed, which allows to obtain the desired texture on the surface.

It may be:

• Silk-screen or light wallpaper. On the basis of paper is applied a thin layer of PVC, and different textures are created by hot stamping. Cloths turn out thin and smooth, reminding beautiful silk fabrics, various on design.

•   - This is a heavier material. In it the vinyl layer can imitate a natural stone, various types of fabrics, plasters.

•   it is distinguished by the thickest upper layer with high strength and high relief. This creates the effects of bulk embroidery, skinned skin. Relief allows you to hide minor irregularities of the walls.

There are chemically embossed webs with a smooth, usually glossy surface, obtained by inhibition. At the same time on the vinyl layer with a printed pattern are applied to individual sections of the inhibitors - compounds that prevent foaming.

They differ:

• Increased strength.
• High resistance to light and moisture.
• Easy to clean with detergents.

The choice of material depends on the quality of the walls, the purpose of the room and its style.

Tip: To hide the visually small irregularities, use embossed and matte panels, and for smooth and smooth surfaces - smooth glossy canvas.

The advantages and disadvantages of the wallpaper are presented in the table:

Tools for work

A sample list of tools for performing work is presented in the table:

This is an optimal set of tools. Some of them can be replaced, but it is necessary that the quality of wallpapering is not affected.

For example:

• Rubber rollers can be replaced with a regular rag, but then there will be a risk of damaging the vinyl layer or breaking the wallpaper through.
• Instead of replacing the small brush with a small brush and smearing it with walls and cloths, it also increases the duration of the work and labor intensity.
• Replacing a stepladder or table with a stool may cause injury from falling.

Vinyl wallpaper sticking features

Before you glue the fabric, you should get acquainted with the features of the work:

• Who does not know how to stick vinyl wallpaper on a paper basis, has never done this before, it is better to invite a person who is already “in the know.”
• It is very important, especially for embossed vinyl sheets of large width, so that the wallpaper glued only on a dry, flat surface. For this, the old coating is removed from the walls (see). All cracks are filled, the surface is leveled and completely dried.
• Dry walls can be easily checked with masking tape and a piece of cellophane that will stick to the surface. Material left overnight. The presence of a drop of water on its inside means that the dryness of the walls is insufficient for sticking vinyl wallpaper on them.
• The usual adhesive tape checks the strength of the coating. For this, a piece of material is stuck on the wall and sharply pulled back. If old paint or plaster particles remain on the inside of the scotch tape, it means that the surface needs to be prepared: remove the existing coating, re-primed, level.
• The room should not be in any case drafts. Terrible taboo: air conditioning, fans, wide open windows. This can be allowed only after the wallpaper has completely dried.
• You can not glue the new canvas on the old wallpaper. They must be completely removed from the walls. To do this, we need to wet the canvas with water, wait a bit, and then remove it with a spatula.

Before you glue vinyl wallpaper on paper, you need to make preparatory work.

For this:

• Removed old wallpaper.
• Scraped areas and flows from the existing plaster (see).

• The wall is thoroughly puttied with several layers.
• It is sanded with sandpaper, which allows the surface to be clean and level.
• The walls are primed, it improves the adhesion of the coating on the wall and helps to protect surfaces from mold and fungus.

Tip: In order for the coating to hold tight, before you glue the vinyl wallpaper on a paper base, you need to coat the walls and the ceiling on which the canvas will be placed with an adhesive. Let the primer dry during the day.

• After the glue dries, a vertical line is drawn on the wall with a weight and thread. This will be the guide for the first wallpaper sticker.
• Turns off electricity.
• All sockets and switches are removed.

Selection of glue and preparation of cloths

Glue for sticking vinyl paper-based wallpaper requires a special one that has greater strength than ordinary paper-based wallpapers. In addition, for vinyl it is better to use glue with additives against the formation of mold and fungus.

Tip: When purchasing glue, you need to make sure that it is suitable for gluing this material. When using PVA glue, it should be borne in mind that it is very durable, so much so that if you need to remove wallpaper from the wall, this will be very difficult.

Before the beginning of the sticker it is more convenient to cut several canvases of the desired length at once.

If you need to use wallpaper with a repetitive pattern, or embossed, you will need to perform a combination of patterns at the joints. To do this, it is more convenient to number the pieces, which will not confuse them in the process.

When working with paper-based wallpaper, glue is applied to the canvas itself, and not to the surface of the wall. After applying the adhesive composition, the wallpapers are folded with the smeared side inside, they remain so for several minutes, which will allow the best material to soak.

Before you begin sticking wallpaper worth watching the video. It will help to take into account all the nuances of the work.

Pasting wallpaper on the wall

Instructions for sticking vinyl wall coverings:

• On the wall before gluing the canvases with a plumb or level, a line is strictly vertically marked along which the first panel is aligned.
• Vinyl wallpaper must be butt-bonded.

Tip: Foamed vinyl on paper is stretched a little when wet, and when dried it is tightened, which makes it difficult to align the joints so that after the final drying there is no overlap or they do not diverge. When unfolding and leveling the cloth on the wall, it cannot be strongly stretched or deformed in another way.

To get a high-quality and smooth joint for wallpaper without rapport, you can:

• Stick the sheets with small overlap.
• Wait until they are a little dry, so that the sheets can move away from the wall when they are stretched.
• A sharp knife in the middle of the overlap stripe along the entire height of the wall is a vertical cut.
• Cut edges are removed.
• Joints are smoothed.
• Aligned cloths are rolled onto the wall, smoothed, squeezed out from under it by air bubbles with a roller or a special soft spatula. In this case, the movement should go from top to bottom, from the middle of the canvas to its edges.
• Excess adhesive extruded at the edges is removed with a spatula or soft cloth.
• Cut off the extra pieces of wallpaper above and below.

Glueing corners

The most problematic area when sticking any wallpaper with their own hands, are the corners. They require special care. The order of work presented in the photo.

The main thing that you need to know if vinyl wallcovering on paper is used to cover the walls, how to glue them in the corners. In this case, one of the joints must be cut through.

For this:

• When the distance to the angle is approximately one width in width and less, this distance is measured and about 4 centimeters are added to it.
• The canvas of this width is pasted on the wall, so that these 4 centimeters are found on the second wall.
• A vertical line is marked on the second wall at a distance equal to the width of the web from the corner.
• The following canvas is glued along this line.
• In the corner turns overlap wallpaper.
• With a sharp knife, two blades are carefully cut through the ruler in this place, and the cuttings of the material are removed.
• So it turns out the joint.
• The junction is well coated with glue and gently smoothed.
• Most often this will shift the pattern. Of course you can try to reduce it.

Wallpapering on the ceiling

The use of lightweight vinyl paper-based wallpaper will reduce the load on adhesion of glue and wallpaper.

Tip: There is no particular difference when sticking wallpaper on a wall or ceiling. The only thing is that you constantly have to keep your hands on the weight, from which your back gets very tired. To facilitate the process should take more breaks.

Despite one technology of performance of work, there are several points that should be considered (see).

These include:

• Even with a starting line, which is a wall, you should make your markup on the ceiling.
• A straight line is drawn on the ceiling along the wall, departing from it a distance shorter than the roll width by 10 centimeters.
• The first roll is glued by aligning it along this line, gently overlapping the wall so as not to smear the wallpaper on the wall with glue.
• For safety it is better to glue paper or tape onto the wall with masking tape, which will protect the wallpaper from glue, and at the end of the work this protection is removed without a trace. But you need to use masking tape, clerical leaves traces.

Look great vinyl wallpaper on paper. How to glue them is briefly described in the article. Observing these recommendations, doing all the work, carefully and slowly, you can not be afraid that the canvases will disappear the next day.

Send the material to you by e-mail

Wallpapering is an important part of any repair. This process is labor intensive and complex. It is interesting to many: how to glue vinyl wallpaper on a paper basis. It is important to choose high-quality glue, because when using poor-quality composition all need to finish again. Features sticky depend on the selected material. Vinyl panels that are characterized by durability, wear resistance and resistance to ultraviolet light are popular. Before you purchase the material is to learn the features of working with this material.

Finishing with vinyl-based cloths provides an opportunity to apply unusual design techniques in the interior.

Sticking consists of the following steps:

• walls are being prepared;

• primer is applied, with the help of which bugs are fixed and miniature bumps are hidden;

• glue is diluted in the container. It should be a solution without lumps and clots;

• using the level draws a line for sticking the first sheet;

• the electricity must be turned off in the room, and all switches and sockets are removed from the walls;
• each roll is cut into strips;
• glue composition is applied to the workpiece, and dry places should not be left;

• a solution is also applied to the surface of the wall;
• sheets are glued end-to-end without allowance;

• excess glue removed by foam rubber or soft cloth;

• the edges are trimmed with a stationery knife.

Useful information!  There should be no drafts in the room. The sheets will dry for two days.

Related article:

Secrets of the correct sticking of the ceiling

Ceiling surface to glue to pasting walls. At the same time it is worth choosing lighter materials.When processing the ceiling is to make all the items and carpeting. If the items cannot be removed, they are covered with plastic wrap.

Note!  Vinyl conducts electricity perfectly, so it is important to remove all exposed wires.

How to glue material in the corners?

Special care is required corners. When the distance to the corner zone remains less than the web, the sheet is cut off by overlapping. This part will move on a perpendicular wall surface. Then the second layer is glued with overlap. Sheets are covered with a special roller.

How much dry vinyl wallpaper on paper basis?

Drying time of cloths depends on the dryness of the working surface and temperature values. If the humidity is exceeded, and the temperature is slightly reduced, then the finish will dry for a long time.

Also, the drying time depends on the type of glue, the amount of mortar used and the microclimate in a particular room.

Flizelinovy ​​surfaces can dry within a day, and paper a smaller temporary interval.

Useful information!  When drying, the canvas with a paper base can significantly shrink, so you need to make sure that the seams do not move down.

With the help of vinyl wallpaper, you can create a stylish and original interior. When choosing textures and patterns, you should use original design solutions and various combinations.

Save time: select articles by mail every week

/ Vinyl wallpaper on paper basis - how to glue them correctly?

Vinyl wallpaper on paper basis - how to glue them correctly?

When carrying out any repairs, everyone wants to get the best possible and beautiful result. One of the suitable finishes that meets all the requirements for beauty and quality - sticking.

Advantages of the solution

Unlike wallpaper, the base of which is made of non-woven, they will be cheaper. This is connected with a simple moment - we have such material as, it is not done, and all the coatings made on its basis are more expensive due to the fact that we have to purchase it in other countries.

To understand how to glue vinyl wallpaper on a paper basis is easy. Everything can be done personally and not resort to the help of outside specialists. The result will please if you follow the basic rules for handling this type of coverage.

The surface made of vinyl is very resistant to impacts. This means that you can apply this finish in a variety of areas, including - with the most difficult operating conditions that require high strength surfaces. For example - in the corridors.

The front surface of vinyl differs in brightness of paints and a huge number of possible drawings or ornaments. There are monochrome options. Some varieties of such coatings can be painted, giving them the shade that they want.

Features

Even on a paper basis, you need to deal with some features of the work ahead. Some nuances and techniques are better known in advance and taken into account in subsequent work.

Glue adjacent strips need only end to end. At the same time, it is important to control the spreading of the adhesive solution - there should not be a lot of it, since with an excess of solution, the wallpaper can begin to stretch. This will lead to the fact that after the evaporation of moisture, they will sit down, forming gaps at the joints.

Another feature is that when smoothing, they can not be smoothed from the center to the edges with stretching. The joints will inevitably disperse after drying. In order to prevent such a situation, when leveling the canvas on the wall, it is necessary to use a spatula, which is not usual in such a case, but a special roller made of rubber. Stripes tightly rolled to the wall and not smoothed with a spatula. Speaking at the joints of the adhesive must be removed without rubbing. After complete polymerization, it forms an ugly film.

Draft - the worst enemies of such coatings and therefore, it is necessary to strictly monitor the formation of such a phenomenon. It is also possible to ventilate the room no sooner than the entire surface dries out. Find out how much dry vinyl wallpaper on a paper basis, you can from the instructions on the roll. The average time required for this is approximately one day.

Pasting process

It all starts with the usual preparation of the wall or ceiling. All traces of old finishes must be carefully removed. If necessary, level the plane with plaster or putty. After that, priming is carried out.

It is very important to wait until the primer dries. You can start working only on completely dry planes. The second most important point will be the choice of glue. The result will depend on the glue on which the vinyl wallpaper on the paper base will be stuck.

You can only use a special adhesive solution that is designed specifically for this type of finish. You should not save on this moment, as the poor quality of the adhesive composition usually leads to the alteration of all the work - wallpaper can fall off the walls.

In addition, with good glue there are fewer problems when gluing the panels on the walls. They are not deformed so much and work with them easier.

The greatest difficulty in the process of sticking, always represents the fitting of drawings. In order to avoid mistakes, it is better to cut the necessary number of strips with an allowance of 10 - 20 centimeters in advance. The size of the allowance depends on the complexity of the ornament.

Having laid them on the floor, you need to achieve the maximum convergence and number the strips in the order of sticking. So, errors will not happen and the picture will match as accurately as possible.

To find out what size stripes are needed, it is necessary to measure all the corners in the room and add another ten centimeters to the largest value. This will be the desired value of the length of one strip.

In contrast to the non-woven varieties of wallpaper, paper base involves smearing the adhesive composition on the strip itself, and not on the wall. When the cloth is plastered, it is folded edges to the middle and left for 10 minutes so that they are completely saturated with glue. This is important - without impregnation, such wallpapers will not adhere well to the plane on which they are glued.

As for the rest, the nick process does not differ from sticking to any other type of such coatings. Pasting starts from one of the corners and the first strip is positioned so that it slightly goes to the corner and the adjacent wall. This allows you to make the joint with the adjacent strip vertical. For reference, they often hold a vertical line, applying a level or a normal plumb line for this.

When choosing a wallpaper for a room, you should follow some rules and do not forget that bright wallpaper with a large pattern is not suitable for small rooms. They will visually reduce its area even more. Best for such a room to choose bright wallpaper. If you want to visually increase the height of the ceiling, then the most appropriate is the use of wallpaper in a narrow vertical strip. AT
this article will cover

From this article you will learn:

Glue the correct vinyl wallpaper on a paper basis, a few steps.

Preparatory work
Before proceeding to the label paper-based vinyl wallpaper, surface preparation is required. It must be leveled to get rid of defects with putty and clean from old wallpaper with a spatula and ordinary water. At the same time, the wall should be not only absolutely flat, but also dry. When working there must be no drafts, the windows are closed and the air conditioner is off. To subsequently under the wallpaper does not appear fungus, it is recommended to process the wall with a special substance.
The first step is to prepare the glue. It is diluted with water in the amount indicated on the package.
While the glue is being prepared, you can start cutting the roll of wallpaper into strips with an allowance of at least 10 centimeters.
This is important, it must be remembered! Glue is applied on vinyl wallpaper, and not on the wall! After which the canvas folds in half for 5-10 minutes. Now you know, .
Now the wallpaper needs some time to swell. This impregnates the fibrous parts of the paper, and the wallpaper material becomes more pliable and stretches.
The technology of gluing vinyl wallpaper on paper basis is almost the same as other technologies. Work starts from one of the corners. At the same time, the canvas can be found on each other by no more than 3 centimeters. It is much more convenient to do it together with an assistant when one is standing on a stepladder and the other combines the edges of the wallpaper butt, holding the bottom of the strip. When the glue hits the wallpaper, it should immediately be wiped off with a soft, dry cloth.
By leaving a stock allowance when cutting wallpaper, a surplus of them is formed under the ceiling, which must be carefully cut off. To do this, use a sharp wallpaper knife.
Before you start glueing wallpaper, sockets and switches in the room are removed, and the electricity is turned off. Wallpapers are glued right on the holes, and then after drying, cut around them, and sockets and switches return to their place. You may have to remove air from under the wallpaper. This is done easily by means of a special rubber spatula or with a dry cloth or a large soft roller.

Practically everyone in his life wondered how quickly to change the design of his apartment? Perhaps the easiest and most accessible material for this is wallpaper. Now the market of materials for decorating walls is represented by various types of wallpaper: classic paper, a variety of vinyl, practical non-woven, unusual photo wallpapers.

The most commonly used vinyl wallpaper on a paper basis. They are made by applying polyvinyl chloride on a paper base. As a rule, this composition is applied in several layers, which makes the coating quite strong and durable. At the end of all, the finished canvas is impregnated with a special composition, thanks to which the pasted surface can be washed.

In order to properly stick vinyl wallpaper on a paper basis, you need to carefully prepare everything. So, let's begin.

Required Tools

Please note that this list is introductory. Everyone can decide for himself what tool will be more convenient for him to work. For example, instead of a wallpaper brush, you can use a plastic spatula or an ordinary roller with a short nap. Perhaps it will be more convenient to apply the primer using an airbrush, and instead of using a simple pencil, use a pen.

Surface preparation

Surface preparation includes:

On a note! If you decide to glue vinyl paper-based wallpapers to paper ones, make sure they last firmly. And only having made sure that the old ones are kept “tightly”, you can proceed with the sticking. However, drawing from previously pasted paper wallpaper can tread on new vinyl. In addition, there is a risk that the old coating will swell or even peel off. Therefore, it is still better to carefully prepare the base before pasting new wallpaper.

Important! Priming surface is a must. This can be done not only with a special primer, but also with liquid wallpaper glue. As a result of priming, a film is formed on the surface of the wall, which contributes to a better adhesion of the wallpaper panels to the wall.

Preparation of materials

Before you start pasting, you need to prepare the canvas.

Roll out of the roll and cut the sheet 10 centimeters more than the height of the room. If the wallpaper is glued with the selection of the picture, when cutting it should be taken into account. In this case, the stock may be more. We recommend on each sheet of wallpaper to mark where the top is. Especially it concerns panels with small, monophonic drawing.

When buying vinyl wallpaper with a picture, do not forget about the selection. So, for canvases with a small pattern, 5 - 10% of the wall area is allocated to the stock. For wallpapers with large print - 10-15%.

Note!Buy vinyl wallpaper on paper basis with only the same batch numbers. Wallpaper rolls with different numbers on the pasted surface may vary by several shades.

Glue preparation. It is better to use glue for vinyl wallpaper, dilute it according to the instructions. The universal type of glue can also be used, but you need to be prepared for the fact that it can be a little worse, since it is designed for both simple paper and heavy non-woven materials. Do not save and make glue very liquid, because it can not withstand the severity of the sheets. At the same time, too thick glue will be applied unevenly, which can lead to deformation.

Tip! Use wallpaper glue with a color indicator. Its use allows you to eliminate the gaps, as well as apply the adhesive composition more evenly.

Important! During pasting of wallpaper sheets, as well as during the period of their drying it is necessary to completely eliminate drafts. All windows, doors must be closed, air conditioning and fans off. It is also not allowed to use heaters for drying wallpaper.

Pasting process

To begin pasting the room you need to mark the wall. Using a tape measure measure the width of the canvas from the window or from the corner, make a mark. Next, you need to attach a plumb to the mark and lower it to the floor. If you do not have a plumb, make it out of improvised means: a rope and a heavy bolt. It now remains to connect the marks on the wall in one solid line, using a level or a ruler. Thus, we have a landmark for gluing the first vinyl sheet on a paper base.

Do not neglect the actions on the surface marking, because without this the wallpaper can stick at a slight angle. Immediately, in one lane, this can and not be noticed, but on a large plane such a marriage will immediately be evident.

Tip! You need to start glueing wallpaper from the window and move to the opposite side of the room. In the room where there are no windows, work begins to be made from the corner.

When sticking vinyl wallpaper with a base of paper, glue applied directly to the sheet. The lubricated sheet is folded from the edges to the center and left to soak for a couple of minutes. It is important not to overdo the wallpaper, because they can soak and stretch, and after drying, shrink back, forming a gap on the wall. However, you should not glue just plastered sheets, as the glue will be absorbed into the wall and the wallpaper may lag behind it.

To learn more about pasting vinyl wallpaper on a paper basis in this video:

Before you start work, it is better to remove the baseboards, sockets and switches. This will speed up the process of sticking, and the work done will look neater.

The process of sticking is best done by several people. One of them will perform work at the top, the second - at the bottom. The first sheet of wallpaper is applied to the previously conducted reference point - vertical marking. Focusing on that, glue the canvas. Smooth wallpaper on paper basis from the center to the edges, in order to remove all the excess air between the wallpaper and the wall. If this is done poorly, swelling may occur after drying. The following is glued butt with the combination of the pattern if necessary. The seams are rolled with a special rubber roller. Wipe excess glue off immediately with a clean cloth.

In the corners, near the floor and ceiling, excess wallpaper is cut with a spatula and a painting knife. Instead of a spatula, you can use a regular ruler. The spatula is applied to the wall and wallpaper is ejected with sufficient pressure on it. It is better to replace the blades more often, since the blunt knife does not cut, but tears the material. As a result, all the work will not look very high quality.

Perhaps, the process of sticking vinyl paper on paper base may seem complicated, but with the right selection of tools, careful surface preparation and good mood, everything will definitely work out!