Add site to bookmarks

• Kinds
• Selection
• Installation
• Finish
• Repairs
• Installation
• Device
• Cleaning

What to consider when buying a hot tub

In any store offering hydromassage baths, the seller will probably colorfully paint the advantages of this product, tell about its technical characteristics and all sorts of advantages. However, it will be quite good if, before communicating with a consultant, you already have information about how to choose a hot tub. This will save you from acquiring as too expensive, and low-functional device.

When choosing a hot tub, pay attention to the insulation, the better it is, the longer the bath will keep warm.

Shapes, sizes and materials

For the manufacture of baths with hydromassage usually used materials such as steel, cast iron, acrylic.

In order to correctly choose a container made of a specific material, you need to take into account your own financial capabilities, operating conditions, dimensions of the room where the bath will be mounted.

1. Steel baths are inexpensive, weigh a little. The disadvantages are the poor ability to keep heat and noise that appears when the bath is filled with water.
2. Cast iron as a material for a jacuzzi is distinguished by a large proportion, high cost. Such capacity will store heat for a long time. However, owners of cast iron tanks with hydromassage should be cautious about the enamel coating; in order to repair the chips, you have to invite the master, since Special materials and tools will be required.
3. The best option when choosing a material - acrylic bath with hydromassage. Acrylic keeps heat for a long time, weighs a little, and scratches can be removed by yourself.

When the material is selected, it is necessary to determine the shapes, sizes. The choice here is quite varied: from modest seated baths to huge tanks, more like a small pool. The latter option is more suitable for SPA salons, rather than for the home. Therefore, in order to correctly choose the shape of a bath with a hydromassage, it is necessary to take into account the dimensions of the room and the possibility of connecting communications (plumbing, electricity, sewage). Today, the manufacturer offers 3 form options.

1. Rectangular. The most popular model that fits well with any, even the smallest room. The usual standard dimensions of a rectangular bath with hydromassage allow the average person to fully immerse in water: length - 180 cm, width 80 cm. If you have only a sitting bath in an apartment, then manufacturers usually offer products with a length of 130-150 cm, with a width of 70-80 cm (height of the sit-down bath - about a meter).
2. Corner. They are considered the most convenient for accommodation in small-sized housing. Corner baths with hydromassage take into account the anatomical features of a person - the body assumes a comfortable posture in the corner jacuzzi, which contributes to better relaxation. The usual dimensions of such a bath: from 140 to 180 cm along the length of one of the sides. You can choose a bath depth of from 60 to 70 cm.
3. Round. Distributed less than others, because for installation require a fairly spacious room. The usual dimensions start at a diameter of 1.3 m. There are models for both one person and two.

In a rectangular or angular hot tub, if you choose a capacity of the appropriate size, also often fit 2 people - then the kit includes a pair of head restraints. The length of the rectangular bath in this case increases to 2 meters or more (with a width of up to 1.3 m), angular - not less than up to 1.5 m.

Back to table of contents

Technical, operational characteristics

The standard dimensions of a rectangular bath with hydromassage.

Whirlpool baths of any type are a system that includes a pump, nozzles and nozzles, and a control panel. Each technical element has its own purpose, which is a good idea to have.

1. Pump. In low-cost models, one unit is used (usually with a power of up to 1 kW), which allows changing the pressure of water jets (their force) only within narrow limits. Large hydromassage baths are additionally equipped with a compressor that mixes both water and air in the nozzles. You can choose a model where you install a separate pump for spinal massage.
2. Nozzles Usually they are installed on the side walls in an amount of not less than 3 pieces on each side. If there is a compressor for back massage, then put a couple more injectors. It is not necessary to chase a large number of them, because in this case, the pressure will drop, and the jets will beat with less force. Sometimes micro nozzles are installed in the bottom, providing aero massage, which, although it does not provide a therapeutic effect, makes the bathing procedure more pleasant.
3. Remote and additional items. PU can be electronic or pneumatic. The first option is more functional, since allows you to set a lot of additional modes. For example, change of pressure of jets, variable connection of nozzles, etc. From additional accessories hydromassage baths can be completed with music, radio, video player, TV. Chromotherapy may also be present in the form of color changing jets.

Want to know the difference between a hot tub and a jacuzzi? Then read our article! In addition, we will tell you how to choose a whirlpool bath and enjoy shopping for many, many years ...

Whatever you know, a jacuzzi and a hot tub are equivalent. So called prophylactic baths designed for comfortable taking of water procedures, massage and relaxation.

You relax - she does everything herself ...

For your information, the overseas word "jacuzzi" is the wrong sound of the name of the manufacturer of the miracle bath. In fact, the “father” of the massage baths was called Candido Jacuzzi, and he was Italian. For the sake of laughter, it is worth mentioning that originally Jacuzzi was engaged in the development of aircraft.

The slogan of the company Jacuzzi and to this day is the phrase "Jacuzzi: the water that moves you" ("Jacuzzi: Water that moves you").

Stress, chronic fatigue, insomnia ... There is a way out! A few sessions of hydromassage - and you perk up. Different modes of the hot tub will help not only to improve the metabolism, but also to improve blood flow.

If you have decided to become the happy owner of a whirlpool bath - how to choose a jacuzzi that is ideal for you?

The main types of hot tubs

Jacuzzis are:

• ordinary,
• combined.

In conventional baths, hydromassage is performed with the help of air-water jets. In such baths, nozzles are located in the sides of the bathroom.

In the combined baths, body massage occurs due to air-bubble and air-water flows. At the same time both hydromassage and aero massage nozzles are involved. The combination of two types of massage allows you to get the greatest effect and benefits from a bath.

Nozzle - the main element of the jacuzzi

When purchasing a whirlpool bath with massage, buyers usually pay attention to the presence of basic and additional functions, since the purchase of hydromassage is mainly due to the desire to get a tool to improve health and maintain shape.

Therefore, the first thing potential buyers need to figure out which type of massage is best suited for them, remembering also the set of additional functions and features.

Jacuzzi - chic, shine and health benefits

But how to choose a hot tub? The main criterion for choosing a whirlpool bath is its functional purpose.

Modern Jacuzzi can have up to ten massage modes, as well as various additional features, such as:

• disinfection system
• backlight
• chromotherapy,
• aromatherapy,
• equipment auxiliary mixers.

What do hot tubs do and what do they eat?

The material for the manufacture of baths with hydromassage can be:

• cast iron,
• steel,
• acrylic.

What is the difference of one material from another?

Baths of cast iron and steel perfectly withstand chemical and mechanical loads, and their main drawback is the possible chipping of the surface in case of accidental impacts, as well as the high level of noise of these metals.

The disadvantages of steel baths can also be attributed to high thermal conductivity, which is why they retain heat poorly and cool down quickly. A flight of fancy is limited to the standard sizes and shapes of steel and cast iron baths.

The most common material for making a hot tub is acrylic.

Enumerate its advantages can be infinite, but here are the main ones:

Acryl perfectly cleaned and does not accumulate microbes.

In comparison with other materials from which the baths are made, acrylic is the most hygienic.

Acrylic is the most appropriate and suitable material for the human body (in terms of our metabolism).

If damage or scratching appears on the surface of the acrylic bath, they can be easily removed with emery cloth.
  Properly treating the damaged place with sandpaper, polish it with car paint.

In comparison with other baths losing color, acrylic will retain its luster forever, since the color pigments are distributed in it uniformly (homogeneously).

Acryl is a kind of insulation material, as it has rather low heat-conducting properties. An empty acrylic bath has the temperature of the room in which it is located.

Acrylic bath is very light, one man (or strong woman) can easily lift it. In this regard, transportation and installation of acrylic baths is not the most time-consuming process in all repairs.

Acrylic is resistant to both ultraviolet and infrared rays.

For a decade, acrylic perfectly preserves its original appearance and properties, which cannot be said about other materials.

A self-respecting manufacturer of an acrylic bath body sets a 10-year warranty, and that says a lot.

As you can see, the choice of a hot tub from acrylic is the best option.

Acrylic pleasure

Note!

Whatever bath you prefer, remember: the composition of massage systems does not depend on the material of the hot tub.

For every taste and wallet

In the modern market of hydromassage technology, the leading position is taken by the Italian firm Jacuzzi, and this is understandable. The elite jacuzzi of this mega-company is designed according to the recommendations of reputable world-famous doctors, for the production of such baths only the best materials and the highest quality components are used.

Jacuzzi vip-class company Jacuzzi will be an exquisite decoration of any elegant bathroom.

Massage "throne" at your service

But do not think that a hot tub is a privilege only for very wealthy people. For buyers with an average level of prosperity, an economy class jacuzzi is perfect.

What's inside?

The Jacuzzi is based on a hydromassage system consisting of a pump, a compressor, nozzles, a control panel and a nozzle system. There is a direct relationship between the number of nozzles and the power of the hot tub.

With a large bath volume, a more powerful pump is needed, and if spinal jets are also present, it is advisable to purchase a bath and a pump separately. For mixing jets of water and air is a compressor.

With the help of an electronic and pneumatic remote you can easily control the intensity and types of massages. Like any other technology, hydromassage baths need proper management and careful care.

Hydromassage footbath - Jacuzzi in mini format

Forget tired legs

To date, the market and in plumbing stores, supermarkets of electronics and household appliances presents a huge number of such useful devices as a hot tub for the feet: how to choose the most optimal option for yourself?
  Let's first understand the appointment of foot Jacuzzi.

Hydromassage foot baths combine the healing effects of water and the benefits of massage, combining relaxation and healing effect into one whole.

Foot jacuzzi has a beneficial effect on tired legs, and massaging the reflexogenic areas of the foot with the bumpy surface of the bottom of the bath helps to improve the functions of all systems of the human body. When aromatic oils, salts and infusions of herbs are added to the water, all of the above effects only increase.

Legs - the health of the whole body

Practically in each modern model of hydromassage baths the function of water heating is provided.

More expensive foot jacuzzi can please their owners with such useful modes as

• bubble massage
• jet massage
• turbo massage,
• wet massage
• dry massage
• boiling water effect
• splash protection, etc.

As additional features, magnets and infrared lamps can be built into the foot bath. Magnets create a small magnetic field, which has a general health effect on the entire body, and infrared lamps are useful for improving blood circulation and improving muscle elasticity and elasticity.

If you are already set up for a much needed purchase and even searched the Internet for useful information on the topic of “hydromassage baths for the feet: how to choose,” then you should not hesitate with the purchase. The choice is yours!

Prices for baths range from 1000 to 10 thousand rubles. Below are the technical specifications of the most popular models of foot whirlpool.

Table 1. Comparison of the functions of hot tubs for the feet of different manufacturers

However, even such a seemingly innocuous device has a number of contraindications, namely:

• thrombophlebitis,
• phlebeurysm,
• dermatitis,
• leg inflammation,
• diseases of the musculoskeletal and nervous systems,
• injuries
• pregnancy.

Clean - the guarantee of health ...

In the care of a Jacuzzi of any size, you must comply with basic hygiene requirements. It is desirable to disinfect the bath after every seventh or eighth massage. Using a non-abrasive detergent, as well as common food acids, it is necessary to clean the bath from limescale and grease.

You want to buy a bath with hydromassage, but do not know which option will be the most optimal? There are different models on the market, differing in type, form, material production and price: from inexpensive Chinese-made baths to luxury-class baths from famous American brands - they can cost as good representative cars.

The main thing in the bath is not the country of origin, although it also affects the price, but the technical component. Paying attention to the quality of the assembly of bathrooms, you need to not forget about such things as warranty and post-warranty service.

Although the manufacturer country is not so important, it is worthwhile to pay attention to Chinese-made bathrooms. If you decide to opt for such a bath, be prepared for surprises. Naturally, there are exceptions.

Production technology in different countries are similar. It is worth noting that baths with hydromassage began to be made in Germany, there they received initially the greatest distribution and development.

The rest of the manufacturers took German technology as a basis in order to further take their own path, introducing their own know-how.

Manufacturing materials ^

The quality indicator is influenced by the material from which the bath is made. The body of your bathroom is its “face”, the buyer looks first of all at the appearance of the bathroom when he mentally puts a tick in the “like-dislike” column and makes a purchase decision.

• In most cases, the law is one - the better the material, the higher the price.
• The material also affects durability. The service life depends on the material itself and on its quality.
• Depends on material  and appearance  your bath and tactile sensations, whether the bath will be pleasant to the touch or sensations will be neutral.

Sport is health, and swimming is one of the most rewarding sports. Everything about you will learn from our article, perhaps you are already a sportsman-discharger, just do not know about it?

Everything about Geyser water filters and their use at the cottage you can read, you need to protect our health!

The cheapest options ^

• Cheap hot tubs are made of banal plastic. Aggressive environment may affect plastic - hard water, salt, light and heat.

  So that this material is not very durable. The "gloss" is quickly lost, the bath grows dull and loses its presentable appearance, scratches appear on the plastic, if handled carelessly, chips are chipped, the casing is quickly contaminated and difficult to clean. That is why plastic tubs, the cheapest.

• Cheap models made of fiberglass, another option. The quality of these baths is better, they are harder to scratch, easier to clean.

Top quality options: ^

These baths benefit from their equipment and additional options. Although not as common, the material is quite expensive. The main drawback is their weight.

It is difficult to deliver a bath, to mount, to make additional holes in it. But cast iron baths have excellent quality characteristics, so they are a popular product in the plumbing market.

pros – high heat capacity and low noiseThese baths are called "classic." Baths are a good competition and steel, and acrylic options. Such baths are very fashionable in Europe.

Acrylic whirlpool bath ^

This is the most popular option. After all, professional whirlpool baths, which are used in medicineexactly fulfilled from acrylic.

In order to increase the service life of such baths on the outside they are strengthened with fiberglass.

• Acrylic baths have good durability. Some companies, such as Unbescheiden, offer enclosure warranty on their bathtubs. up to 20 years.
• Acrylic baths are hard enough to scratch and cause other damage.
• Acrylic baths easy to clean, clean and sanitize.
• Acrylic baths are not exposed to aggressive environment - sunlight, heat, salt, hard water, etc. Nothing will happen to them.
• Acrylic baths are resistant and to temperature changes.

One of the types of hydromassage, very healthy, is Charcot's douche. What is it, and indications for use, about the cost of this procedure, see our article.

Steel bath with hydromassage ^

This type of bath is quite rare. The flexibility of the acrylic coating has led to the fact that today the whirlpool equipment is installed more often on acrylic baths.

Much less often, steel baths are used for this, even more rarely cast-iron baths, which weigh very heavily, especially with hydro-massage.

In terms of heat capacity, steel baths are inferior to cast-iron versions. Water cools faster in steel tanks.

Although the process of hydromassage does not interfere at all. You can enjoy it indefinitely. Level of voicing  - an important indicator of steel baths.

It is important to worry about availability rubber liningso that the metal does not ring under the stream of spurting water. Steel baths of the latest generation are manufactured using new technologies with the use of noise absorbing material.

Bath size ^

Not everyone thinks about the dimensions of the bath in advance, and it is in vain. Then you can face a number of problems, if the bath does not fit into the room or does not fit in the elevator, you will have to cut through the door, push it on the tap through the window, simply return it to the seller.

Choose a bath with hydromassage. Step-by-step instruction. ^

1. We start with the fact that we define the dimensions of the room where the bath with hydromassage will be installed.
2. It is important to find out the maximum allowable area for the installation of a hot tub. For a small room better suited rectangular option.
3. The shape of the bath can be any - rectangular, round, angular, oval. Oval is better positioned against the wall, the corner bath, which is a quarter of a circle, should be placed in the corner. The round bathtub looks great in the center.
4. Decide exactly how much money you are willing to spend on a bath, whether you need a budget option or you are ready to fork out for a luxurious luxury bath.
5. Choose an option based on your taste preferences, the size and interior of the bathroom and the design of your home.

Note!

• For an ordinary apartment, the optimal choice would be a small whirlpool bath, if you have large areas and where you can walk around - you can buy a bath of any shape and size. Round models look beautifulwhich can be placed in the center of the room.
• Large models should be purchased taking into account the maximum permissible room size and human anthropology. Bath should be comfortable.
• The person should not slide off in the bath, and should not feel discomfort in the constant search for a foothold.
• The bath should be deep, but there should be no risk of drowning in it.
• The bath should be wide and long, so that the person feels well when sitting or reclining in it.
• Depth 42-43 cm with a capacity of up to 200 liters  - optimally. If the volume of water is larger, the weight of your bathroom will be greater, hardwood floors may not withstand such a load.
• The best length of the hot tub in most standard apartments 1.5-1.7 meters.
• The compressor is one of the main parts of the bath. Power of air streams depends on it. If you want to enjoy a quality massage, give preference powerful compressors. Naturally, the more powerful the compressor, the more expensive the bath.
• For the hydromassage is responsible pump. For a 250 liter bath, power from 1 kW is needed. But the more injectors, the more powerful it should be the pump.
• The number of nozzles is important. The quality of the massage, the power of the pump and the compressor, and, ultimately, the price of the bath will depend on this. When choosing, pay attention to models with jets for massage the main body areas.
• If you are counting on the original design, then keep in mind that for the work of professionals will also have to pay a tidy sum.
• For all the extra gadgets: the presence of a radio, remote control, heating, lighting and other additional bonuses to the bath - a separate surcharge. Decide whether you need such a bath or you want a simple budget option.

Clean water - the guarantee of health, but if you have a country house or cottage, water purification becomes a must. Learn how to choose, by what parameters?

Everything about radon baths in the city of Pyatigorsk, the healing properties of this procedure, you will learn, preserve and increase our health!

Returning to the topic of choice of baths. For bathing newborns special baths are used and it is not so easy to choose them, because there are many nuances. Read how to make the right choice of bath here: find the best option for you in terms of price and quality!

Foot bath with hydromassage ^

Hot tub is a tank, most often plastic, equipped with massage nozzles, and it is quite simple to manage them. To prevent puddles, the bath is equipped with a splash shield.

If the device is filled with water and works in vibration mode, water will not splash. Use of hydromassage for legs incredibly useful.

The beneficial effects of water on the nerves and important points of the legs restores the tone of the body. Choosing a bath, pay attention to the size, because you have to store it somewhere.

It should be compact for storage conditions in a modern apartment. There is a wide range of models of hydromassage foot baths on the market. When choosing be sure to pay attention to the availability guarantees.

Hot tub prices ^

On average, a good hot tub can be purchased in the area 1000 dollars  or 32,000 - 35,000 rubles.

Acrylic baths  - most popular in the sanitary market, the price range for them varies on average in the area from 15,000 to 35,000 rubles.

Cast iron baths are more expensive, average prices from 25,000 to 50,000.

Steel baths are on average from 10,000 to 30,000.

Prices for hydromassage baths vary from 1000 to 10 000 rubles, depending on the functions and the number of nozzles.

If you are aiming for a hydromassage spa pool, you will have to fork out. The price of the question starts from 350 000 rubles.

What you should pay attention to when choosing a bath with hydromassage using the example of Radomir baths:

Just 10 years ago, a hot tub was considered a real luxury, available only to wealthy people. But times have changed. Now the middle class can get a bath with the function of hydromassage. A wide range of types and models of such baths can not but delight buyers. But how to choose a hot tub? What should be considered in the first and second? Let's try to figure it out together.

Forms, types, modifications of hot tubs

Manufacturing companies offer a variety of style and color bath solutions. On sale there are models made of different materials. Which hot tub to choose - acrylic, steel or cast iron? Each of them has its own characteristics. For example, cast iron baths retain heat for a long time and do not require special care. Acrylic products are easy to lift and durable. Bathtubs from steel differ in reliability and stability.

Types of whirlpools:

• With air system. At the bottom of such a bath are nozzles. They blow air into the water, resulting in bubbles. Thanks to these bubbles, a light massage of the skin is provided.

• With hydraulic system. On the walls and bottom of the bath are special jets, supplying a jet of water. The direction of the water jets is easily adjustable. Thus, you can massage the problem areas of the body.

• With a mixed system. This is a "hybrid" of the two previous species. Such a bath model is more expensive than the others, but it provides an effective effect on certain areas of the body and the organism as a whole.

The shape of hydromassage baths can be:

• round

• rectangular

• corner

• oval

Which whirlpool bath to choose? It all depends on the taste preferences of the buyer, his budget and design features of the bathroom. If the room has a modest size, then a corner model would be a suitable option.

We have dealt with the forms, types, modifications of the whirlpool baths. But for the final decision, other factors must be taken into account.

Advantages of whirlpools

Far from all Russians understand why you need to give so much money for a bath with special functions, when a regular bath is several times cheaper.

Hydromassage is useful for people of any age. It is shown to be experiencing serious physical and psychological stress. It is enough to lie in a hot tub for only 15-20 minutes - and there will be no trace of fatigue. You can add to the water aroma oils, sea salt and medicinal herbs in the form of decoctions.

Water massage is considered an excellent tool in the fight against cellulite. The appearance of visible results is worth the wait after 7-10 procedures. People who regularly take a hydromassage bath are less irritated and feel great. They are always in a great mood.

TO the benefits of hot tubs  also include:

• Attractive appearance;
• Large selection of forms and modifications;
• Reliability and durability;
• Availability of additional functions;
• Long service life.

Disadvantages of whirlpools

Before you install in your home bath with massage function, you need to explore not only its advantages, but also disadvantages. This will avoid wasting money and problems in the future. Disadvantages of whirlpools  a little, but still they are. This is due to the materials from which the construction is made. Cast iron bath is very cumbersome and traumatic. Scratches and cracks may appear on the acrylic surface. And the walls of steel baths retain heat poorly.

Hot tub pipes are a separate topic of conversation. They can not be processed by chemical means, which creates a suitable environment for the reproduction of bacteria.

A common disadvantage for all whirlpools (regardless of the material of manufacture) is their high cost. Although many buyers are willing to pay any money to improve their health.

Main dimensions of whirlpools

Answering the question " how to choose a hot tub“It is worth noting that its size plays an important role. It takes into account the size and configuration of the room. Oval, angular, round - such are hydromassage baths. How to choose  appropriate option? Experts advise to choose a bath so that after its installation in the room there is free space, and also remained the same level of comfort.

Let's talk about the main the size of the hot tubs:

1. Rectangular model (in this bath you can lie). Its length is 1.7-1.8 m, and its width reaches 800 mm.

Hot Tub AT-918 APOLLO Dimensions: 170 x 90 x 63 mm

2. Hip bath with hydromassage function. The length is 1.3-1.5 m, and the width is 700-800 mm.

3. Angle model. It can have dimensions of 1500x1500 mm or 1800x1800 mm. The height of such baths is 600-700 mm.

Manufacturers

How to choose a whirlpool bath and do not lose? Many buyers are chasing low prices. But a truly high-quality product can not cost a penny. Some companies that produce hot tubs, go to meet their customers. They produce low-end models of excellent quality, as well as a full range of functions.

We list manufacturersyou can trust:

• Bellrado company. All products undergo numerous tests and quality checks. Huge selection of models of baths, various shapes and colors.
• The company "Niagara". The production of hydromassage baths is carried out according to the latest South Korean technology.
• The company "Radomir". One of the few Russian manufacturers. Baths manufactured under this brand are distinguished by their durability and ease of installation.

The cost of hot tubs

Everyone knows that baths with hydromassage function are much more expensive than ordinary models. Here, too, you can choose a profitable option for yourself. Sometimes in cost of hot tubs  includes costs associated with their delivery and subsequent installation. In general, the price of such a bath depends on several factors: the manufacturer, the availability of additional functions, shape and size.

The cost of whirlpool baths varies greatly. The cheapest is the model BAS Tessa (from 6 360 rubles). And expensive models can cost from 300 to 550 thousand rubles. These include products from Teuco, Victory Spa and Jacuzzi.

Now know how to choose a whirlpool bath. First you need to decide on the appropriate size, type and shape of the bath. Then study the technical characteristics of the models presented. The final step will be the choice of a bath for the price and manufacturer.

After a hard day of work, a hydromassage bath is the ideal solution to relieve both physical and psychological stress. There are several options, so it is important to know the features relating to the choice and use of such baths.

Pros and cons of the bathroom with hydromassage

Before buying any expensive equipment or equipment, it is recommended to analyze the existing advantages and disadvantages. Thanks to this, it will be possible to decide whether a hydromassage is needed in the bathroom or whether it can be saved. Existing benefits:

1. Promotes healing of the body, improving blood circulation and denying a tonic and relaxing effect. There are advantages from a cosmetic point of view, because the hydromassage eliminates.
2. Some models are multifunctional, combining hydro and aero massage, chromotherapy and so on.

Bath with hydromassage and has disadvantages:

1. If you compare with ordinary baths, then for the additional function of the "hydro" will have to pay more.
2. To operate the equipment you need to connect to the electrical network, which implies additional spending on electricity.
3. For many, a significant drawback is the installation features and the need to regularly flush the pipes.

How to use the hot tub?

All models come with their own instructions, which describe how to properly use the bathroom. There are a number of general recommendations that should be considered:

1. Although the massage bath is relaxing, hydromassage sessions should not be too long. It should start with short procedures for 10-15 minutes. gradually increasing the time to 30 minutes.
2. It is not recommended to collect too hot water, so ideal indicators are 36-39 ° C. For a tonic bath, it is better to use cool water up to 30 ° C.
3. If while taking a bath with hydromassage there were unpleasant feelings, then you should stop the session. For your own safety, it is recommended that you first consult a doctor.

Best whirlpool bath

The stores offer a wide range of models, so it is important to know what you should pay attention to in order for the purchase not to disappoint in the future:

1. First, consider the size of the equipment, since it is important not only the place to install, but also the ability to deliver it to the site, since the hydromassage baths are supplied assembled with all the tubes and nozzles.
2. The most popular are acrylic hydromassage baths, which are not as noisy as steel and not as heavy as cast iron. Due to the plasticity of the material, you can create original forms.
3. In addition to hydromassage in the bathroom, additional functions can be used, for example, aero massage. There are models that use swirling jets that create whirlpools. Used in the baths and light jets for original color effects. Useful additions include the headrest, side rails, ionization, disinfection, automatic cleaning, voice control, and so on.

Corner whirlpool bath

If the area of ​​the bathroom is small, this is not a reason to refuse to install the bath, since space can be saved with the help of corner baths. Traditionally they are performed in the form of a fan opened at 90 °. In addition, you can find an acrylic bath with hydromassage in the form of a petal or in the form of a trimmed drop. You can install it in any corner of the room, since manufacturers duplicate models in two versions, that is, making left-sided and right-sided baths.

Round bath with hydromassage

If the area of ​​the bathroom allows, then you can install a round bath. In most cases, models are made of acrylic, as it is a very convenient material necessary to obtain the desired shape. If you are interested, you should take into account that in some variants the volume of the bowl is small and it’s not possible to accept the horizontal position in it. The diameter of the comfortable baths can vary in the range of 150-200 cm. It should be noted that there are recessed and outdoor round options.

Double bath with hydromassage

In modern interiors, you can often see large baths that can fit two people. This is the perfect solution for lovers of romance. A large whirlpool bath can have a rectangular and figured shape. Due to their large size, manufacturers can install many additional functions in such devices. In most cases, there are several programs on the hydromassage and jet to relax the muscles. You can install a bath with a hydromassage with a side waterfall.

Hot tub treatment

In order to be able to enjoy the hydromassage for a long time, it is necessary to clean it regularly. There are a number of tips on how to care for a hydromassage bath:

1. To make the acrylic bath shine, use a soft sponge and special products that do not contain abrasive particles, ammonia, acetone and other solvents to clean it.
2. For disinfection, fill the bath with water at a temperature of 20 ° C so that its level is higher than the nozzles. Add 1.5 liters of 5% bleach solution or a special disinfectant. Turn on the hydromassage for 10 minutes. After that, turn it off, drain the water and refill the bath. Turn on the hydromassage for a few seconds to remove residual product, drain the water and rinse the surface from the shower. Perform the procedure once a month.
3. To clean the nozzles from water stone deposits, fill the bath with water, as in the previous method and add 1.5 liters of 10% solution of citric acid or vinegar. Turn on for a few seconds to mix everything up, and leave it at 12 o'clock. The end of this procedure is identical to the cleaning option discussed above. Hold it once a year.