Coffee table with their own hands from the chair. DIY coffee table: ideas and implementation

To begin with, a lover of self-made furniture should learn how to create a stool, since this is the easiest. And then comes the time to study the issue of creating a table.

Table designs vary, however, the simple version is very similar to the process of making a stool.

A simple table for use in the country or during a picnic can be assembled in just a few hours. To do this, you need a hacksaw, hammer or drill.

However, a table based on a similar approach can also be made for living quarters. Because it is able to perfectly replace the current very large version bought at a retail outlet or furniture store.

The process of self-creation of the table is also interesting from the other side, since with the help of it there is freedom of the author's creative expression. It can be imagined as a noticeable element of the interior of the room.

The creators of handmade amateur furniture are called carpenters for a reason. They do not apply the usual definition like: sofas or bedside tables, or maybe cabinets.

Having gained experience in this area, over time it will be possible to create exclusive types of tables with advanced characteristics.

Now consider the issue of self-creation of tables based on wood.

Wood is distinguished by its purity and availability, in addition, it is not as difficult to process as other materials. It conveys the maximum energy of the aesthetic filling of the style of the living room.

Due to its properties, it is condescending to the mistakes of beginners in the field of self-creation of furniture. However, thinner versions of the tables will require an advanced level of skill.

To begin with, having learned how to work with wooden things, then it will be easier to use as a material: glass, plastic or even metal.

Selection of tools and premises for work

To engage in the independent creation of tables or other wooden furniture elements, it is necessary to use only non-residential premises.

This is due to the specifics of working with wood. It leads to the formation of a large amount of dust, chips and other waste.

And the process of toning or creating protection for a stain-based material can form dangerous emissions into the air. Actually, nitro-varnishes can also be dangerous.

Because of this, for a personal carpentry workshop, you will have to take care of airing the room. Experts advise creating artificial ventilation of the room.

Many people use the garage for this, however, production waste can pollute or damage the car because of this, this is not the best option.

Carpentry tools belong to modern and traditional types

For the most part, you can start with a simple carpentry tool, however, later modern versions may be required in the form of:

• A rotary version of the miter box, which helps to create saw cuts based on two planes, adhering to the required size.

• This tool will reveal all its useful properties, first of all, with a bow saw. This couple is considered universal, it can be useful for many jobs.

• A manual version of the universal electric jigsaw, featuring a tilting shoe to help create a cut based on the desired angle in relation to the vertical plane.

• Disc version of the grinder. It will help beginners complete the surface treatment of wood in about 5-15 minutes. An experienced carpenter, along with sandpaper, can do the same job in about an hour.

And there is also a conventional belt grinder for grooves with recessed places, which is distinguished by a protruding version of the working part.

Such tools are distinguished by the price and narrow specialization of the work, experienced craftsmen recommend taking them for a short rental period.

The best specialists, using various sanding machines, can even create the effect of artificial aging of wood, however, this is a very difficult job, as for beginners.

Which tree is the best?

To create a wooden table, any wood that has an average resistance to the rotting process will work well, however, you should refrain from soft versions like: poplar, willow, ailanthus, aspen, and even alder.

From domestic types of wood it is best to use:

• soft options in the form of pine, fir, cedar, horse chestnut, plane tree, juniper or spruce.

• solid in the form of an ideal oak, suitable for many works beech, maple, walnut or ash, larch, as well as fruit species represented by apples, plums, pears, apricots and quince. And also here it is worth including elm and mountain ash.

• rather hard species based on acacia, yew, stone birch, dogwood and boxwood.

Conclusion

You want to decorate the table and probably all types of furniture created by yourself with an artistic version of the painting, and not with ordinary stripes.

However, over time, the pattern may deteriorate, so that this does not happen, it is necessary to rub the paint into the depth of the tree before the varnishing process. This can be done on the basis of technology - glazing. We are talking about layer-by-layer rubbing of the paints used.

DIY table photo

Landscaping is an ongoing process. You build something, you improve it. Moreover, furniture is constantly required and tables are most in demand in the country. And put in the garden, and near the house, and also in. How to make a table for a summer residence with your own hands we will tell in this article using the example of finished projects.

Homemade table from boards from pallets

Dismantled pallets served as the material for this table. Naturally, you can use new boards. Only one condition - they must be dry. You can buy dry ones (it costs more) or buy ordinary ones, put them somewhere in ventilated piles and soak for at least 4 months, or better, six months. In general, any furniture, including, is made from dry wood.

We assemble the table for the street - put it in the gazebo, therefore we will not glue the tabletop boards, but fasten them from below, with the help of planks. This is a very simple country table and very cheap.

Having dismantled the pallets, we get boards with an individual color and pattern. Having conjured a little, shifting them several dozen times in different manners, we achieve the desired result. It turns out quite a nice table.

We take the side parts of the pallet. We use them for the frame of the table. We grind them first with coarse sandpaper, then finely bring them to the required smoothness (grain 120 and 220).

We take the strips that remained unused, with their help we fasten the countertop. We place them in the place where the joints of the boards are located. We use two self-tapping screws for fastening each board with a joint, one for a solid one.

From the processed sidewalls and two boards (also sanded), we assemble the table frame. We fix its parts with self-tapping screws at the end (two for each joint). The frame can be glued or also “planted” on self-tapping screws. Only their length is large. Under each, we pre-drill holes with a drill, the diameter of which is slightly smaller than the diameter of the self-tapping screws.

We turn the assembled countertop over and grind it. The order is the same - first with sandpaper with a large grain, then with a fine one.

Next up is installing the legs. We select four boards of the same size, check their length, adjust if necessary. Then again grinding. It's easier than sanding already screwed legs. We fasten the sanded boards to the frame. These will be the legs. For each - two self-tapping screws fixed in a diagonal (look at the photo). For greater stability, we install jumpers at the bottom. About 10 cm can be left from the floor to the jumpers. We connect everything with self-tapping screws so that the boards do not crack, we pre-drill holes.

After removing the dust, varnish again. In theory, the varnish should lie flat, but depends on the wood, so another sanding / painting cycle may be necessary. As a result, we get such a homemade country table.

If you do not like motley boards and traces of old nails, you can make their boards the same design. This table can be rectangular, maybe square. All dimensions are arbitrary - see the available space.

Country table from the remnants of the boards

This do-it-yourself table for giving is assembled from the remains of boards of different breeds and sizes. Pine boards 25 mm thick and 50 mm wide went to the frame of the tabletop, the remains of 15 * 50 mm were left on the legs. We make the frame according to the dimensions you need. This table will stand on the veranda, and it has a small width. So let's make it not wide - 60 cm, and the length is 140 cm. The height of the legs is 80 cm (everyone in the family is tall).

We immediately cut off two long boards of 140 cm each. To make the width of the table top 60 cm, subtract twice the thickness of the board used - this is 5 cm. Short bars should be 60 cm - 5 cm = 55 cm. We fold the frame, following right angles, twist with screws. We check whether the bars are folded correctly - we measure the diagonals, they should be the same.

We cut off the boards four boards of 80 cm each, fasten them from the inside to the assembled frame. You can use 4 screws for each leg.

Approximately at the middle of the height of the legs we fasten the crossbars. This is a shelf frame. The shelf can be used for its intended purpose, and it also increases the rigidity of the structure. We fasten strictly at right angles, checking with a large square.

We put the frame on the floor, check whether it staggers or not. If everything is done correctly, it should stand rigidly. Next, take sandpaper or a grinder and grind.

Let's start assembling the countertop. From the finishing work there were boards of different types of wood, some of which were stained. We alternate boards of different colors.

We fasten the tabletop boards with finishing nails, carefully finishing them with a finisher. On the shelf can be fixed with ordinary nails or self-tapping screws. Then smooth with a grinder. The last step is painting. Very unlucky with the choice of varnish. Bought too dark, did not like the look. Will have to sand again and paint a different color.

Wooden table with glued top

This design features L-shaped legs. They are assembled from boards of the same thickness. In this case, 20 mm. To keep them well, 5 self-tapping screws are needed. Pre-drill holes with a drill with a diameter of 1-2 mm less than the diameter of the self-tapping screws. Then, with a larger diameter drill, we drill recesses for the caps. The diameter can be matched to furniture plugs of a suitable color or made from a wooden rod. Another option is to use wood putty, to which you add wood dust that remains after sanding. After drying and sanding, traces will be difficult to find.

When assembling the legs, make sure that the angle is exactly 90°. As a pattern, you can choose a bar. First, we coat the joint of the two parts of the leg with carpentry glue, then install the screws in the following sequence: first the two extreme ones, then the middle one, and only then the other two. After the glue dries, sand the legs, varnish and dry.

It's time to make the tabletop. It is assembled from boards of the same thickness. Pick up the size you need. You can use fragments of different widths. It is only important that everything looks organic, and the sidewalls of the boards are even and docked without gaps.

We coat the sides of the boards selected for the table top with glue, lay them on a flat surface (some kind of table) and tighten them with clamps. In this case, they managed one, but preferably at least three. We tighten so that there are no gaps in the resulting shield. We leave for a day. Having removed the clamps, we get an almost finished countertop. It still needs to be trimmed - to align the edges, and then sand it. You can trim with a jigsaw or a regular hand saw. Using a grinder is difficult to get a straight line, but you can try. After grinding, we get a beautiful countertop.

Using the same technique, you can make an oval or round countertop. It will only be necessary to draw the appropriate line and cut the glued boards along it.

To make the table look more attractive, we will make a frame. We take a thin bar, process it with sandpaper and fasten it around the perimeter of the countertop. Finishing nails can also be used. Only the planks are also pre-lubricated with carpentry glue, and then with nails.

After the glue dries, we again process the junction with sandpaper.

Now you can attach the table legs. We assemble a table frame from four boards (there is no photo, but you can do it as in the previous paragraph). We fasten it to the back of the countertop with glue, then install furniture confirmations through the countertop. Under the confirmations, a preliminary hole is drilled with an extension for the cap. Holes for fasteners are masked in the same way as on the legs.

We attach the legs to the fixed frame. We put them inside the frame. You can attach with ordinary screws. That's it, we made a table for giving with our own hands.

How to make a wooden garden table with benches

For this table, boards of 38 * 89 mm were used (they dissolved them themselves), but you can take standard sizes. The difference in millimeters will not really affect the results. In the photo below you can see what should happen.

To connect the parts, studs 16 cm long with washers and nuts (24 pieces) were used. All other connections are made with nails 80 mm long.

The parts are installed in place, a through hole is drilled with a drill. A stud is installed in it, washers are put on both sides and nuts are tightened. Everything is tightened with a wrench. How convenient is this option? For the winter, you can disassemble and take it to a barn or garage.

Making seats

According to the drawing, we cut the boards of the required size. Everything is necessary in double quantity - for two seats. We grind the boards, pay special attention to the ends.

We cut the short segments with which we fasten the three seat boards along the edges at an angle of 45 °. First, we assemble a structure that is attached to the seat from below. We take a board about 160 cm long, at the end we attach two short boards cut at an angle to it. Attach it so that this board is in the middle.

Then we attach the legs to the resulting structure (you can use nails). Then we add more boards cut at an angle and tighten everything with studs and bolts.

We attach the seat boards to the resulting structure. Since this is a table for the street, it is not necessary to knock them down close. Leave a gap between two adjacent at least 5 mm. We nail to the supports (which are cut down), two for each board.

We fix the finished seats with four boards 160 cm long. We fasten each leg with studs (if you walk, you can put two studs by setting them diagonally or one above the other).

Putting together a table

The table is assembled in a different way. Please note that for the countertop, the transverse boards are sawn along the edges at 52 °. We fasten them at such a distance that the legs enter. Each board has 2 nails. You can finish, with small hats, or you can hammer deep, and then mask the holes with putty.

Now we need to assemble the legs-crosses. We take two boards, cross them so that the distance between their ends is 64.5 cm. We circle the intersection with a pencil. At this point, it will be necessary to remove the wood by half the thickness of the board.

We make the same notch on the second board. If you add them together, they are in the same plane. We connect with four nails.

Similarly, we make the second leg for the table. While the table is not collected.

Installing the table

Now you need to fix the legs to the structure on which the benches are installed. We put them at an equal distance from the benches, fasten them with hairpins.

Now install the table top. We also fasten it with studs. The last step is painting. Here everyone does as he likes.

Variations on a theme

According to this drawing, you can make benches and a table separately for giving, garden. The design is reliable and easy to implement.

Do-it-yourself table for giving: drawings

Do you love designer clothes, but sigh in frustration when you look at the price tags that adorn them in stores? Try to become a designer yourself. Think it's difficult? Nothing like this! Following the instructions, you can easily create an original piece of furniture from improvised materials with your own hands. And we suggest starting with a coffee table - such a simple, but very important piece of furniture. Believe me, at such a table you will be happy to give tea to your guests, who will admire your skills. In addition, by creating a coffee table with your own hands, you literally fill your home with warmth and put a piece of your soul into it. So it's definitely worth a try.

Romantic idea. All year round, drinking your favorite drink at this table, you will remember the warm sea, the gentle surf and the moonlit path. "Marine" table is tenderness, sophistication and originality in the heart of your home.

How to do?

1. Take an old window frame and clean it of dust and dirt. If the old glass is cracked, insert a new one, then get rid of the layer of old paint and sand the surface. Next, you should remove the metal corners, which additionally fix the frame parts.

2. Cover the frame with white enamel or acrylic paint. If you chose acrylic paint, after drying, sand it with sandpaper so that the wood shows through - this will make the table look aged, which will give it a special sophisticated look. You can also use two colors by choosing a white and blue gamut. First, paint the frame with blue paint, and after the first layer has dried, cover it with white. When the second layer dries, rub it with sandpaper - then blue will come out from under the white paint.

3. We make legs for the table. To do this, take the cutting and cut it into 4 equal parts (each about 34 cm), then go over them with sandpaper to remove all the roughness.

5. Now each blank needs to be drilled in 4 places. Pre-mark and then drill a hole for attaching the legs, as well as another one - in any convenient place - in order to secure the legs more securely.

6. After that, using a long self-tapping screw, you need to attach each leg to the base.

7. Next, you need to attach the legs to the frame using self-tapping screws. The window frame is a kind of “box” in which it will be necessary to put all the sea gifts brought from the rest - the front part of the frame, which stands on legs, will be facing the floor, down.

8. Now you will need a coarse thin rope, which will need to be braided around each leg. Fix the rope using a glue gun.

9. Now you need to wash and degrease the glass on both sides. Next - pick up and place on the glass "seafood". Arrange them so that it seems as if they are casually scattered and at the same time flow from one corner of the table to another - and their number should gradually disappear. Now you need to attach each element with a two-component transparent adhesive. At the same time, marine elements should not protrude above the edges of the flat “box”.

10. You will need to order glass from the glass workshop, the thickness of which will be 4 mm. The size of the glass should be such that, leaning on the frame, it can cover the “box”. At the same time, 1.5 -2 cm of the frame should be open on each side. In the workshop, you need to ask that the edges of the glass be processed and holes 4 mm in diameter should be drilled into them. The glass needs to be wiped and covered with a table. From leather or thin rubber, cut out spacers that will be under the washers. Fix the glass with self-tapping screws. Screw them in carefully so that the glass does not crack.

11. Take a coarse thick rope and make a loop at one end, which will be equal to half the length of the table. Using a hot glue gun, glue the folded rope in half from the center of the long side of the table to its edge. The loop itself (about 12-15 cm) does not need to be glued - it should be free so that you can then tie a knot. “Bypassing” the glass around the perimeter and going around all its corners, continue to glue the long end of the rope to it. When you reach the loop, you need to thread the end of the rope into it so that you have a sea knot. Now, stretching the rope in the opposite direction (doubling), you need to glue it.

12. Decorate the outer corner of the table - on the side where the most marine elements are located. Make a continuation of the composition by placing additional details as if they are “draining” from the table leg right under the glass of the tabletop.

Ready! Enjoy your creation and give joy to your guests!

Table-suitcase for travel lovers

A very original solution for an old favorite suitcase that has seen other lands with you and that you don’t want to throw away because of the memories.

How to do?

To get started, go to the store where you will need to purchase furniture legs (wooden or metal). If you want to make a mobile table - then you need to take the wheels. You will also need plywood, screws and a screwdriver.

Now we make markings on the bottom of the suitcase for future legs and drill holes. Since it will not work to attach the legs to the fabric, we put plywood inside the suitcase, make markings on it through the holes and also drill it. Now we attach the mount to the bottom of the suitcase and fasten the legs. Using hot glue, glue the felt inside the suitcase.

To give the table an original appearance, reminiscent of distant travels, you can decorate it with stickers made in the form of stamps, or decorate it at your discretion.

That's all - an unusual coffee table is ready! By the way, there are a lot of options for turning suitcases into tables: choosing the legs to your liking, you can make a table in retro or classic style. You can not attach the legs at all if you have a massive suitcase - it will look truly incredible: such a table will bring a sense of adventure and adventure into the interior, the spirit of travel and unexplored distant countries.

Log table for nature lovers

A log table for connoisseurs of the nature of a summer house or a country house is warm and natural, it will always evoke the mood of a weekend, in which everything is saturated with tranquility, birdsong and the scents of nature. Making such a wonderful table is also quite simple.

We take wooden bars (in this case, birch) of the same height and width, only 32 pieces. You also need to take the base for the table, legs (4 pieces), putty to match the wood, a screwdriver and glue designed for wooden surfaces.

First you need to assemble the base for the table, then glue wooden bars around the perimeter, and sew up the middle with cardboard. Then we fasten the legs to the bottom. Next, we glue thin wooden dies to the inner surface - thanks to this, it will seem that the table is completely wooden. Now we take the putty and carefully close up all the voids, after which we overwrite until an absolutely flat surface is created. Voila! Now you are the owner of an unusual table that will become the highlight of your interior.

If you like the idea, you can create other tables according to this scheme, using, for example, branches instead of bars. To create such a table, you need to take a plywood box painted with black paint, the size of which is 40x40x60 cm (or any other size of your choice).

To glue the frame, we take branches, from which we first remove the loosely holding bark (we do this with sandpaper). What is the procedure for gluing: first we glue the branches on the long side of the table, and then we select wooden dies and, like a mosaic, lay them out on the ends. The thickness of the dies should be approximately 1 cm, they can be cut with a parquet or circular saw. And finally - install the glass, which will be the countertop. If desired, by screwing wheel supports to the table, it can be made mobile.

Using the same technology, you can create many more unusual pieces of furniture. You can lay out the branches horizontally and then you get such a wonderful table. Such furniture looks not only very original, but also incredibly stylish.

original pallet table

An original table made of pallets of pallets, which are probably lying around in every country house? And you can make them a very convenient and functional element of the interior.

How to do?

To get started, collect all the tools you need for your idea: the pallet itself, a drill, clamps, a hammer, screws, a nail puller, glue designed for wood, wheels, soap, a primer, a screwdriver. In addition, take paint brushes, a petal brush head with abrasive bristles for a drill, varnish and a colorless primer.

First of all, you should take a drill with a nozzle designed for processing wood and clean the surface of the boards from dirt with it. Now carefully disassemble the sanded pallet into parts. Lightly tap the rusty nails with a large hammer and carefully pull them out with a nail puller. Glue the broken pieces of boards with wood glue. At this stage you will need clamps. They need to carefully clamp the boards and wait until they dry out.

Now the parts prepared for the countertop need to be nailed and glued on the reverse side, then clamped with clamps and wait until they dry.

Then cover the table with a colorless primer, and then varnish. Next, on the back of the table, mark the places for the screws to attach the wheels. Drill holes for the fasteners. In order for the screws to easily enter the wood, grease them with soap. Using a ratchet, you can quickly and conveniently tighten hex screws.

Stylish, compact and quite functional table is ready!

Photo instructions for making a coffee table from pallets

Table from boxes

A table made from drawers of drawers? But it has come, and now you yourself can create such an unusual piece of furniture at home. Surely you yourself will be delighted, and your guests will appreciate the originality of this idea.

How to do?

Take 4 wooden boxes, sandpaper, water-based varnish, roller and brush, dowels, 10 mm plywood sheet, PVA glue, 4 wheels and self-tapping screws.

First you need to sand the boxes and varnish them. Then, using a drill with an emphasis, make holes at the ends of the boxes. Using wood glue, you need to fix the dowels in the attachment points and connect the ends of the boxes to each other. Attach the wheels to the plywood sheet, and then attach the sheet to the boxes with self-tapping screws. The table is ready!

These extraordinary things can be created from quite ordinary materials. Having imagination and a desire for originality and comfort in your home, you can easily work wonders. Look around: maybe the old window frame has every chance to turn into an interesting element of the interior?

Or maybe a huge wooden reel from an industrial cable that can become an elegant piece of furniture?

Believe me, there are a lot of things around us that can turn into something truly unique and precious. You just need to look at them from a slightly different angle.

Even a novice master can make a table from improvised materials. But before assembling a coffee table with your own hands, it is better to view the drawings and diagrams in advance. This will allow you to decide on the shape of future furniture and cut off too complex options.

Do-it-yourself drawings and diagrams of coffee tables

It is comfortable, lightweight and versatile. For the rigidity of the frame, the underframe is assembled from legs and a drawer - a rectangle connecting the legs and supporting the tabletop. Otherwise, the legs will move apart and the table will lose its stability.

At the same time, the complexity of the assembly does not increase much, but now you can store books, notebooks or other trinkets in the coffee table.

A feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. To it, on a short pair of supports, a wide board is fixed - the underframe, and a double tabletop is attached to the high supports, which, in the unfolded version, rests on the underframe.

PVC pipe magazine table

The simplest and most economical, but very original version of a coffee table is to make it from plastic pipes. The shape and height depend only on the wild imagination. It can be a small round table that functions as a bedside table or a full-fledged coffee table with a glass top.

To create it you will need:

• pipes of two diameters - thicker for the legs and narrower for the underframe, for example, 16 and 9 mm;
• glue gun or a tube of transparent superglue;
• medium grit sandpaper;
• hacksaw for cutting plastic pipes (can be replaced with a saw for wood);
• acrylic paint to hide the printed markings on the pipes.

The process itself is simple to disgrace:

1. Cylinders of the selected length are cut. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
2. You need to start assembling the base from the center - so there will definitely not be large gaps between the cylinders. Glue is applied to the entire surface of the adjacent pipes. A little trick - to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it stacks down the entire length of the joint. With a glue gun, the joints are simply processed from the outside - after painting they will become invisible.
3. When the desired shape is reached, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will fall on one side.
4. The final step is painting. The easiest way to do this is with an aerosol method, although you can also use a simple paint brush.

When laying a glass top on your table, you should choose tempered glass with a thickness of 10 mm. To prevent the removable tabletop from sliding on the base, use silicone shock absorbers for furniture.

If a non-removable countertop is planned, it is fixed with transparent silicone glue.

Assembling a wooden coffee table with your own hands

For admirers of the classic style, there is nothing better than a wooden table. For him, you need to stock up:

• planed bar 40x40 mm - for legs;
• planed board 50x20 mm - for the side;
• a finished worktop made of furniture board 800x400 mm (but MDF or plywood is also suitable);
• putty for wood - overwrite holes from self-tapping screws;
• sandpaper or a grinding nozzle on a drill - process wood;
• varnish or paint - for finishing the table.

Of the tools you will need a screwdriver (or screwdriver), a saw for wood and a drill. After cutting the bar into legs, and the boards into the drawer side, the assembly of the table itself begins:

1. The underframe is assembled first. For convenience and ease of assembly, everything is done upside down. Sidewalls to the legs are attached obliquely with self-tapping screws through pre-drilled holes. But you can also use metal corners if aesthetics are not so important.

Wooden tables are not only made from planed wood. With minimal woodworking skills, you can create original furniture even from firewood. For example, picking up a wooden block of suitable height and a pair of U-shaped thick branches, working a little with a grinding nozzle and varnishing everything, you get an excellent massive coffee table for a summer residence.

And if after the construction of the house there are several euro pallets left, there is no need to rush to dispose of them. It's almost a finished table!

It is enough to grind and stain the surface, put them one on top of the other and securely connect them together. And to make the table mobile, 4 wheels are screwed from below, 2 of which are with brakes.

Decorating a coffee table with epoxy resin

If there is a sawmill nearby and there you can get a sawn board with a lot of defects for a pittance - just great! It is from such materials that the most beautiful tables decorated with epoxy resin are obtained.

The process is time consuming but not overly complicated:

1. The cut board is glued with wood glue into the countertop. Flat boards must be placed under the clamps - for uniform fixation.



2. After the glue has completely dried, the tabletop is polished, all cracks and holes from knots are cleaned. Before applying epoxy, the surface must be cleaned of dust and small chips.



3. To make the table glow effectively, use luminescent paint in powder. About 100 g of paint is needed for 2 liters of the finished resin solution. Resin and hardener are mixed 1:1, the dose should be measured accurately and so that the hand does not flinch. Too much hardener will cause the resin to crack, while a lack of hardener will delay the curing period.

Such a tabletop is suitable for a coffee table in the living room of a cottage, and in the bedroom of a city apartment.

If there are several meters of wooden bars left at home, you can even make a table out of them! The video shows in detail and clearly how to make unusual designer furniture from building debris:

.

Those who are not particularly concerned about mobility may catch fire to see a solid table made in a rustic style in their living room. Such a craftsman can be offered to create a table from powerful boards. This version of the table will perfectly fit into the interior of any country house.

Unobtrusive thoughtful laziness, coupled with a thirst for creativity, can often lead to quite interesting discoveries. And one of these discoveries is a soft table made from a used tire.

It's easy to assemble:

• In the chipboard, it is necessary to cut out two round segments, 3-4 cm in diameter less than the diameter of the tire chosen for the table.
• Four legs, preferably metal, should be screwed to one of the round segments, since the table will turn out to be quite weighty.
• The bottom segment and the tabletop are attached to the sides of the wheel by means of self-tapping screws.
• After that, it remains only to decorate the sidewalls with the table top with jute piping.

In the end, the jute construction from the old tire looks great.

You can use random items. After only a few hours of work with this material, consisting of 4 boxes and a pallet, a completely original and noteworthy design can be obtained.

You can also use planed bars and planks of a conventional picket fence to make a table.

Frame - a base made of picket fence can be tinted with black stain to give the structure a kind of contrast.

Also, wood can be combined well with metal parts. Here is a model of a table made from pieces of grooved board framed by a cornice strip on metal legs.

Legs made of smooth reinforcing bar look very elegant

According to the prepared template, bars with a cross section of 10-14 mm are bent, corners with a thickness of 1.5 to 2 mm are welded to them by means of a welding machine. The tabletop is made of tongue-and-groove boards "forties". After the legs are screwed to the countertop, it should be cleaned, toned and varnished. Legs can be painted black.

An excellent way to make a frame for a coffee table would be a profile pipe. Having welded two identical squares from it, painted them and provided them with a tabletop made of strong boards, a good example of country furniture came out.

For stability, the squares under the tabletop should also be connected to each other by welding and a profile pipe.

Wood saw cut will also look very original in the form of a table top.

Electric planer, grinder, varnish, a couple of hours of time and the countertop is ready. The legs of the reinforcing bar will look great under such a massive tabletop.

A good option is a combination of glass and wood. Here is one of the options for such a community.

Light glass is originally combined with a massive wooden base

A mobile table looks very modern and stylish, made from an ordinary wooden pallet and covered with glass on top.

For lovers of functional models, a transformer table may come up. A few manipulations and the table radically changes its appearance.

The basis of the next transforming model is a pair of metal pedestal frames hinged to the table top. When the lid is turned, the horizontally lying structure rises to a vertical position.

The cover of this table is made up of two plates, shifted horizontally. One plate rotates around its own axis. If desired, this transformer can be easily deployed into a dining table for 4 people.

Transforming table "three in one"

After a successful experiment with plywood scraps, such a miracle may appear

For a long time, the master had to fiddle with measurements and calculations.

In theory - everything is simple, but in appearance - you can not say.

Not otherwise, for the calculation, it was necessary to use a three-dimensional modeling program.

Some home craftsmen do not bother with the complexity of the design and conceived just like to play with cubes. And here's what comes out of it.

The cracks are begging to be covered with a glass top.

A transparent optical adhesive is best for bonding glass to wood. It will be impossible to drill ordinary glass at home without special tools.

For the manufacture of countertops, eurolining may be best suited. Spacers with legs and sides also come out well from it.

Euro lining tabletop

From eurolining, you can make a tabletop of any shape. It is easy to cut with a jigsaw.

Before making a coffee table, you should prepare some tools:

• screwdriver;
• belt grinder;
• jigsaw;
• roulette;
• hacksaw.

Also, before proceeding with the manufacture, a drawing should be made, which will display the entire design and diagrams of the docking nodes.

Finishing the table should be done in two stages. Before assembly, sand the lid itself, legs and bottom with sandpaper. After the table is assembled, the product is coated with stain and varnish.

Even more simply, a table is made of chipboard. This material can simultaneously perform two functions, form a surface and carry a load. It is better to use for veneered sheets, since no varnish can hide the wood-chip texture.

Upon completion of the assembly, all edges of both the table top and the legs with the bottom must be sealed with a special plastic furniture tape, warming it up with a building hair dryer before gluing.

Video: Homemade coffee table