How to update a kitchen set. How to update an old kitchen? What can be repaired in the kitchen set on their own

When you can't afford a new kitchen set, you don't have to sit and sigh looking at a chipped countertop or worn backs of chairs. A little effort - and the restoration of kitchen furniture with your own hands will breathe new life into it.

Restoration of a kitchen set

Of course, the replacement of functional elements of furniture (tabletops, etc.) can only be done by a pro. But lighter types of restoration work are available to any home master. These include:

• replacement and restoration of accessories;
• attaching a self-adhesive film;
• staining;
• varnishing;
• fabric trim;
• seat upholstery;
• gluing tiles.

accessories

First of all, the replacement of the following elements is needed to resume the functionality of the furniture, but at the same time, a minimal update of its appearance is also ensured:

• loops;
• guides;
• pens.

Replacing and relocating door hinges

A common problem is that the hinges are still in working order, but the places where they are connected to the elements are loose or pieces are torn out altogether. In this case, door hinges need to be moved.

Stages of work:

• dismantling of old hinges;
• marking holes for new hinges;
• drilling holes;
• installation .

Now the cabinet doors hang straight and shine with new hinges. But what to do with the holes for the old hinges? They must be carefully sealed with an acrylic-based putty.

On the construction market, you can find a whole range of such putties, designed specifically to mask bumps and depressions in wooden surfaces. Since these compounds shrink, they need to be applied in 3-4 layers and then level the surface of the putty with sandpaper. The final stage of masking the old grooves under the hinges is the application of varnish or paint (the choice depends on the color of the furniture). You can read about design ideas for the kitchen at.

An equally common type of breakdown of kitchen fittings is the failure of guides in drawers. If the original assembly had roller guides, it is better to replace them with ball guides. The replacement technology is simple: fasteners are unwound, old guides are removed and new ones are installed.

Replacing handles can already bring new notes to the appearance of the kitchen facade. But they will look aesthetically pleasing only if the entire set of handles is replaced, so it is important to choose the same ones for all cabinets and drawers.

When choosing handles, show your imagination, choose a design that is different from the previous one. At the same time, it is worth remembering the compatibility of materials: for example, plastic ones will look inappropriate on a fiberboard facade, and metal ones will be trite. Handles made of combined materials look spectacular, for example, metal with wooden or glass inserts. You can read about the kitchen in art style in this.

facades

At home, the following types of restoration of kitchen facades are available without the use of paints and varnishes:

• gluing a vinyl film;
• pasting with a cloth or oilcloth (decoupage);
• molding.

Wrapping with vinyl film

This type of furniture redesign is cardinal (you can completely change the color and pattern), but it does not hit the pocket.

The range of self-adhesive film is huge, there are plenty to choose from.

When buying a self-adhesive, first of all, pay attention to the print quality - the pattern should be even, without color differences along the entire length of the material.

Self-adhesive film can be smooth and textured, imitating various materials: the surface of marble, wood, fabric, etc. The average service life of such a film is 3-4 years. The convenience of self-adhesive film as a material for redesign is that a damaged or torn off area is easy to replace.

An interesting solution is the restoration of the kitchen facade with a film in two color variations: the upper part in light colors, the lower part in dark colors, or vice versa.

Working mechanism:

1. Height and width measurements of cabinets and drawers. For the convenience of measurements, there is a grid with a 1x1 cm square on the back of the vinyl film. All the necessary parameters need to be marked only on the back! In places where the film is bent, an allowance of 20 mm is left.
2. Open the films. The vinyl film is cut with sharp construction scissors, with an indent of 2-3 mm from the contour line.
3. Preparation of pasted parts of the facade. The handles are unscrewed, the surface of the panels is cleaned, degreased and left to dry completely.
4. The film is glued from top to bottom, the back, the paper layer is removed gradually. It is important to ensure that there are no air bubbles between the film and the surface of the furniture: they are very difficult to remove when the part is already pasted.
5. Smoothing the surface of the film with a rubber roller.
6. Screwing the fittings into place.

Watch the video instruction, where you will see clearly about all the nuances of work.

It is difficult to carefully stick the film on weight, so it is better to unscrew the facade elements and place them on the floor for measurements and pasting. It will take longer, but the work will be done more carefully.

Decoupage

The decor of furniture facades with dense fabric is a distinctive element of the fashionable Provence style. You can imitate Provencal design using an equally fashionable decor method - decoupage.

The choice of decoupage material depends entirely on your personal preferences. Decoupage elements in ethnic style look original and appropriate in the decor of the kitchen in light colors - ornaments “Petrikovskaya painting” or “Gzhel”.

Decoupage steps:

• Surface cleaning. In order for the fabric to lie on the surface of the facade evenly, without wrinkles and creases, it is necessary to get rid of pores or microcracks, if any, using the same wood putty. After the putty dries, the entire surface on which the fabric will be glued must be treated with fine-grained sandpaper.
• Bonding the fabric to the prepared surface. For this, ordinary PVA glue is suitable.
• Covering the decoupage surface with acrylic varnish. Varnishing is carried out in 3-4 layers, the next layer is applied only after the previous one has dried. It is most convenient to use a brush with a long, but narrow brush.

The fabric can be pasted over not only wooden, but also plastic or glass surfaces of the kitchen set. It is not necessary to clean them, it is enough just to thoroughly degrease the place where the fabric will be glued.

The material for decoupage can be not only fabric, but also a regular one with a pattern you like.

Another interesting option for restoring kitchen furniture with fabric is decorating hanging cabinets with fabric from the inside. It will give new life even to ancient cabinets that do not have doors. The fabric is stretched over the corners of the cabinet and fixed with nails and screws. Crockery and kitchen utensils look much more interesting against the background of stretched plain or patterned fabric than against the background of a bare board.

Decoration molding (pasting)

Molding is another type of affordable decor for kitchen set panels. It is an overhead element made of wood or plastic, which are attached to the facade with wood glue. Classic molding comes in the form of wooden planks, which are cut to the desired length and with which you can form decorative elements to your liking. But you can also purchase a decorative molding that imitates stucco or carved elements. We can say with confidence that if you have such a set, you can read about how to choose wallpaper for a classic kitchen in.

The combination of molding with other types of restoration, for example, repainting, can completely update the appearance of a kitchen set.

Processing of furniture with paints and varnishes

Restoration of kitchen furniture with the help of paintwork materials provides for the following types of work:

• staining
• varnishing;
• stain processing.

Painting in a contrasting previous color will radically update the look of the entire kitchen space. The most suitable coloring agent is car enamel, which is resistant to aggressive environments (high temperatures, high acidity, etc.)

Coloring

1. Disassembly of the facade. At this stage, the headset elements to be painted are removed, all handles are unscrewed and the glasses are removed. Areas that are not planned to be painted must be sealed with mounting tape (you can also glue the glass with it if they cannot be removed). If the surface of the facade is covered with MDF film, it must be completely removed. For this purpose, a building hair dryer is used.
2. Sanding the surface with sandpaper. It is convenient to use a construction grater.
3. Coating the surface to be painted with a primer for wood. The composition is applied in two layers.
4. Direct staining. Here you can use a different tool: brush, roller, spray gun. It all depends on the skills of the master. If the hand in the finishing area is not stuffed enough, it is easier to use a roller.

If the usual coloring does not impress you, try adding zest to it with the help of a glitz. It is a translucent paint with a thick texture. Glizal is applied to the prepared (cleaned and primed) surface in a thick layer. Further, patterns are formed on the paint that has not yet dried with the help of a sponge moistened with water. An unsuccessful line or curl can always be removed by running a roller over the work surface. You can find out about ceramic tiles for an apron.

Expert advice on working with paints and step-by-step instructions on how to transform a wooden instruction:

Lacquering and stain treatment

Opening with varnish will help restore the presentation of kitchen sets made of natural wood. Choosing a clear varnish will update the natural color of the wood, and if you use a varnish with a pigment, you can change its shade. You can read about built-in kitchen appliances.

Opening facade elements with varnish is best done in non-residential premises - a dry coating is very toxic.

Stages of work:

1. Preparation of varnished surfaces. Just like when painting, fittings are removed from the facade elements, glass inserts are sealed with adhesive tape;
2. Removing the old layer of varnish. To do this, use fine-grained sandpaper. The surface of the wood is sanded until the remnants of the old coating are completely removed. Wood-chemical dust arising in the process can be easily removed with a vacuum cleaner. After dedusting, the surface is carefully wiped with a damp flannel or sponge and thoroughly dried.
3. Applying a primer. We make sure that the primer composition is evenly distributed over the surface to be treated. Let the primer dry completely.
4. Lacquering in several layers with a brush. To maximize the natural beauty of wood, we make each top layer thinner than the bottom one.

Mahogany furniture can be updated by covering the elements of the facade with three to four layers of stain. This will give it a solid retro look. The stain is applied in the same way as varnish, on a previously cleaned and sanded surface.

How to update kitchen furniture

Restoration of the facade of the kitchen set is only part of the resuscitation of its beautiful appearance. But it is quite realistic to restore other elements of the headset with your own hands: the tabletop.

DIY repair chairs

Types of work that can be done at home include:

• updating varnishing;
• seat stretch.

How to apply paintwork is described above - the mechanism for varnishing chair parts is no different from working with facade elements. Consider how the seat upholstery is replaced:

• The seat is dismantled, the old fabric and upholstery are removed. Try not to damage the wooden base - it will still serve.
• A pattern for the future seat is made of thick cardboard. Lay the plywood base on the cardboard and circle it with a pencil, taking into account 3 cm for allowances.
• Using a template, cut out a blank for a new seat from foam rubber or batting. Next, using the same pattern, we cut out the fabric base of the new seat. On each side, you need to leave at least 12 cm for the hem. If the fabric is not plain, it is important to monitor the location of the pattern or ornament on it. The image should be strictly in the center of the fabric base.
• Glue the foam blank to the plywood base using regular superglue.
• The fabric is fastened with a staple gun or a construction gun. First, a fabric blank is spread on a flat surface face down, then plywood is applied to it, the side to which the foam rubber was attached should be at the bottom. Stretch the fabric around the entire perimeter or circumference of the chair and secure with staples. Try not to have large folds between the staples.

If the old upholstery of the chair has not leaked and still retains its density, you can stretch the fabric directly over it. In the same way, you can restore a worn one.

Countertop in the kitchen

The countertop is one of the most vulnerable places of the kitchen set, because it is located in the working area. That is why or other materials lose their presentable appearance before the rest of the furniture elements. There are several ways to simple and not very expensive restoration of countertops:

• staining;
• varnishing;
• decoupage;
• ceramic tiling.

The first three methods have already been described above. Tiling involves gluing to the surface of the tile (it is better if it repeats the finish of the kitchen backsplash in color and texture) using tile adhesive. The final stage of laying - grouting. You can read about wall decoration in the kitchen by clicking on this.

Tile adhesive dries very quickly, so do not smear the entire surface of the countertop with it at once. Apply glue to the new area after you lay the tile over the previous one. You can choose the original skirting boards for the countertop

Kitchen table

The tabletop, as well as the kitchen worktop of the working area, loses its presentable appearance before the rest of the headset elements. Various restoration methods are suitable for updating it, the schemes of which were described above:

• for tables made of natural wood - painting and varnishing;
• for tables made of fiberboard - painting, varnishing, pasting with a vinyl film, decoupage, gluing tiles.

And finally, another master class on how to restore kitchen furniture:

A comprehensive restoration of a kitchen set, from replacing (changing) fittings to reupholstering chair seats, will cost several times cheaper than purchasing a new set. If you do, the design will be completely unique.

It may seem that handles are an insignificant element and are not even worth talking about. But designers have a completely different opinion on this matter. They argue that it is the small details that play a rather large role in the overall image - they give the furniture a finished look and emphasize the style. If the kitchen set as a whole is well preserved, has not cracked, but the handles have faded and peeled off, then the interior of the kitchen will look sloppy.

That is why urgently replace the old handles with new ones! Now you can find a huge variety of different options: these are modern staples of various colors, wooden, or transparent plastic.

Want to brighten up your kitchen? Get colored pens, they will certainly bring a fresh touch to the interior of the room. Experiment not only with the material, but also with the shape. Now there is a huge selection of different handles for furniture fronts, for example, in the form of animals or plants, which your child will simply be delighted with.

The range of door handles is so diverse that it can satisfy the needs of any, even the most demanding customer.

When going to the store for new kitchen cabinet hardware, be sure to take an old handle as a sample, otherwise you can make a mistake with the size, as a result, you will have to make new holes in the doors, and this is just a waste of time.

Decorative inserts

Another interesting idea on how to update a kitchen set with your own hands is a sticker on the facade of cabinets (including doors) of decorative inserts. You can use a variety of materials for this - the remains of ceramic tiles, for example.

This will require the following materials and tools:

• ceramic tiles (you can take leftovers for this purpose and even buy scrap at a bargain price);
• tile adhesive;
• overlay strips.

Special skills are not required. You should not abandon this method for the reason that you have never had to lay out a tile before. Believe me, everything is much easier than it seems. First you need to unscrew the doors of the cabinets, remove the fittings. Wash them thoroughly and let dry. It does not hurt to treat the pollution with some kind of alcohol-containing solution. If you want to radically update the facades, then it is worth pre-painting. Dilute the tile adhesive. Lubricate the surface of the facade. And start gluing the tiles according to a pre-created sketch.

To add aesthetics to the facade, make a frame of decorative or plastic strips around the tiled mosaic. Glue them also on glue, but pick up a universal one, one that fits both surfaces without any problems and leaves no marks.

By the way, inserts can be not only ceramic, but also made of rattan fabric - they are most suitable for kitchens whose interior is designed for eco-style or for some kind of country style.

That's all - the finishing of the facades of the kitchen set is completed. The home master only had to install them in their places and screw the unscrewed fittings.

Let there be color!

Colored boxes will instantly transform the interior of the kitchen space. Colored blotches, disproportionately located on the surface, are very fashionable now. If the kitchen is made of wood, just paint a few of the drawers in different colors. For example, if a white kitchen needs updating, then paint the drawers green or blue. Do not be afraid to create, there are no restrictions, it can be red or yellow, to your taste.

Although white is considered the color of purity and neatness, in general it is rather boring and monotonous. And it is the bright color blotches that can make the furniture colorful and cheerful. If the kitchen is made of plastic, then the boxes can be pasted over with colored self-adhesive film, which is sold both in construction markets and in stores. Remove boredom and despondency from the family hearth!

wooden decor

Wooden stickers on kitchen doors look original. You can buy them ready-made - kits for children's creativity are also suitable for this purpose. Can you cut? Wonderful! Then make wooden blanks with your own hands! Cover them with varnish and glue to the doors.

It is up to you to decide what shape the sticker will be - small flowers or stars, geometric shapes or fences glued across or along the door panels. If you have a child, invite him to participate in this interesting business, he will decorate kitchen furniture with great pleasure under your guidance.

Chintz accent

Chintz facades look non-trivial. In order to decorate the kitchen in this way, you will need a piece of chintz, which you can buy in a store or find in your closet, measure the doors of kitchen furniture, cut the fabric according to the measurements and stick it on the panel (be sure to remove the handles before this!).

After drying, paint over the chintz with a colorless varnish - this should be done five to seven times. Along the perimeter of the glued fabric, you can attach wooden slats that will complement the innovation and make the decoration more accurate. And if you manage to make a lampshade from the same fabric, sew chair covers, then you will get an unusually beautiful kitchen.

Decoupage

Decoupage is one of the most spectacular and cheap ways to update a kitchen set. The works of the masters turn out to be so interesting that even after looking at not very high-quality photos, it is still breathtaking and I want to try to transform the furniture in the kitchen that has become incredibly annoying beyond recognition with my own hands.

To make such beauty, nothing expensive is required. All you need is an artistic flair, an understanding of how the transformed furniture will look after the decoupage work comes to an end.

What will be required:

• dye;
• large drawings of a kitchen theme (for example, fruits, beautiful jars of spices or cereals);
• acrylic lacquer;
• primer;
• craquelure varnish (provided that you want to achieve the effect of aging - as a result, the furniture will be covered with artistic cracks);
• PVA glue (or special decoupage);
• sandpaper;
• a set of brushes.

Again, you can not do without parsing the kitchen. Unscrew the panels, remove the fittings. Thoroughly wash the surface to be decoupage. If necessary, sand, remove bumps.

Carefully inspect the surface, if there are large cracks on it that spoil the appearance, then you will first have to putty them. After that, go over the panel with sandpaper.

To make the surface look even and the applied decor then look natural, it is better not to be too lazy and primed.

If you plan to do decoupage on glass inserts, then you must definitely degrease the glass. Special detergents will help you deal with this.

Prepare the pattern you want to place on the furniture. Consider the surface area, the size of the pattern will depend on it. Do not paste too small images. But, of course, it all depends on the idea being implemented. It is better to use special three-layer napkins for decoupage. Which drawing to choose is up to you, but keep in mind that they must be of good quality and fit the overall interior of the kitchen. If the main decor of the room is made in the Provence style, then pictures depicting lavender, olives, climbing roses will do.

By the way, you can print pictures for decoupage yourself if you have a laser printer available.

You can go the other way - decorate kitchen cabinets with pieces of wallpaper with a suitable pattern. Perhaps this is the easiest decor option.

If you decide to decorate an old set with wallpaper, then in this case standard decoupage glue or PVA will not work. In this case, the adhesive is selected from the type of wallpaper.

The final touch is to completely cover the entire part with acrylic varnish. This must be done 5-6 times.

It is necessary that each previous coat of varnish dry well.

We assemble the kitchen set and admire the transformation. Do not forget to take a photo and post it on social networks - this way you will wait for your friends to visit faster, they will probably want to learn the secrets of updating kitchen furniture with their own hands and see how the set looks live.

Imitation of fabric on old kitchen furniture

There is another way to update a kitchen set - fabric imitation. If you do not want to mess with the real material, use this method. First you need to remove the doors from the hinges. Paint the front with white paint and let dry completely. Next, apply a thin layer of paint in any other color of your choice, but make sure that the white color does not show through the new layer. If desired, you can leave a white border around the edges. Now start creating. Take a spatula with large teeth and draw straight lines from top to bottom. The result is smooth tracks. Move a little distance and look at the door - it seems that it is covered with a striped fabric. If you also draw horizontal lines, there will be a feeling that the fabric is in a cage. There is one important circumstance - be sure to make sure that the hand does not tremble, the lines are even. It is also impossible to tear off your hand when drawing lines, otherwise the tracks will look sloppy.

Self-adhesive film

One of the easiest and most inexpensive ways to update a kitchen set is to glue the facades and internal shelves with self-adhesive film. The assortment of this material in stores is impressive - you can easily pick up a vinyl film with the desired pattern. The image on the film imitates different surfaces: natural stone, leather, wood texture.

Self-adhesive film is ideal for the restoration of old kitchen furniture:

1. It tolerates high humidity;
2. Resistant to sudden temperature changes;
3. Washes well;
4. If necessary, it is easy to replace the damaged fragment.

Materials and tools:

• vinyl self-adhesive film with the desired pattern;
• accessories;
• roulette;
• marker knife / scissors;
• rubber roller;
• sponge.

Before starting restoration work to improve the appearance of kitchen furniture, it is necessary to completely free it from the contents, remove shelves, drawers, remove facades from hinges, and remove fittings.

Place the unscrewed fronts on a hard horizontal surface. Now take measurements - the height and width of the boxes, facades that you are going to paste over with self-adhesive film. Record this data.

Unscrew the handles, corners and other fittings, if any, on the facades.

Now arm yourself with sponges, detergents - thoroughly wash the surface on which you plan to stick the self-adhesive. Make sure that there are no greasy stains on the panels and shelves. Be sure to dry the headset with a clean, soft, lint-free cloth.

Self-adhesive film is easy to work with, and even a novice furniture restorer can handle it without any problems. Please note that a paper centimeter grid is applied on the reverse side of the film. It will help you cut out the details of the desired size.

Do not forget to add 4-5 cm to the pattern in those places where the film will be bent. This margin is necessary in order for the film to stretch well. When you start cutting the film, control the location of the pattern, if it is there.

Using a marker knife, cut out the required number of parts according to predetermined sizes (taking into account the margin for hem).

Start decorating the headset. Attach the film to the surface of the facade, carefully peel off the protective paper base, on which the centimeter layout is made. After the film has adhered evenly, pass over it with a rubber roller. Make sure that the self-adhesive film lies evenly, there are no air bubbles under it.

In such a simple way, paste over all the facades, shelves, drawers. Replace hardware if necessary. Screw the fronts into place.

Now enjoy your work! The set has changed, will last a few more years or until you want to radically replace all the furniture in the kitchen. In the meantime, get ready to listen to compliments from friends who have come to the light that they were able to transform their old headset so cheaply beyond recognition.

Facade replacement

There is another cardinal way to update the kitchen set - a complete replacement of doors. But we must say right away that this method cannot be classified as economical. Having made measurements of old doors, you can order new ones, at your discretion, both in color and in material.

You can varnish or paint new doors. And do not be upset that, apart from the doors, everything remains old, no one, believe me, will notice this. And if the base of the kitchen is in good condition, then it will be able to please you for many more years. There is another important detail - you did not overpay for the update, because almost all wooden kitchens are basically made of chipboard, and only front panels are made of wood. Think for yourself why you need new costs when the “skeleton” of furniture is already good. If the shelves over the past years have become so dirty that it is almost impossible to wipe them off, paste over the surface with self-adhesive wood-like film - inexpensive and beautiful!

Glass replacement

If your kitchen cabinets have glass doors and shelves, replace them with new, more modern ones. Now at the peak of popularity frosted and colored glass. The updated facade of kitchen furniture, as well as new shelves - and we can assume that you have fashionable furniture in your kitchen.

It is best to order glass in a store, but if you do not have the means, you can use the method that our grandfathers invented - apply a mixture of powdered chalk with silicate glue with a brush on the glass in two layers.

You can put beautiful bright dishes on the shelves, which will give the kitchen a “cheerful mood”, and under the shelves you can make a backlight. The result is a kitchen set that will not yield to expensive Italian furniture.

Moidodyr

If our advice and examples with photos did not convince you to update the old kitchen set, then try to at least just wash it thoroughly. Over the years, a huge amount of soot and grease eats into the surface of the furniture, and with high-quality cleaning, it can even change color. Furniture that is finished with plastic and enameled is easily cleaned with ordinary washing powder at the rate of one tablespoon per liter of water. Washing the surface of enameled furniture with water above fifty degrees with soda or laundry soap is not worth it. These funds lead to tarnishing of the enamel. It is enough to wipe the wood with a well-wrung out cloth, and then dry the surface of the furniture with a linen napkin.

If there are many small cracks and scratches on the surface of the furniture, purchase a special product from the store that masks them. In case your table top has a stain from a hot pot once placed, you can easily wipe it off with a mixture of alcohol and vegetable oil.

Metal parts of the kitchen that have darkened or faded from time to time can be updated with a self-prepared product - ammonia (30 g), chalk or tooth powder (15 g) and water (50 g). All this mixture must be shaken well, and then applied with a flannel napkin to the darkened surface and rub it to a shine. After such processing, furniture handles will be better than new ones.

In a word, choose the method that you like and go! Everything that you do for the sake of your favorite cuisine, she, believe me, will appreciate it and will delight you with its new look for a long time to come. We will be glad to see in the photo how the furniture has changed, thanks to our advice and your skillful hands.

The advice of a professional designer for the restoration of the kitchen, one way or another, is necessary. Our masters are working on the restoration of kitchens, adjusted for the features of lighting and layout of the room. The style of furniture should be effectively conveyed. To do this, fittings of the correct color and shape are selected, a certain color and texture of the finish are used in the restoration of kitchen furniture, the choice of built-in appliances and household utensils is important.

Restoration of an old kitchen, for example, in country style is carried out using transparent varnishes to show the natural pattern of wood or deep, but not bright matte paints. There are many artistic effects when renovating a wooden kitchen. Painted wood can be given the effect of aging by stitching or patination. The main thing is that such techniques look appropriate.

Restoration of kitchen furniture in high-tech and minimalist style, on the contrary, should emphasize the conciseness of the design. For her, resistant materials with a pronounced shine are selected to emphasize impeccable cleanliness. On the facades it is customary to use laminated plastic, and for countertops - natural and artificial stone. After the restoration of kitchen furniture, it is important to properly mount the built-in appliances. It should look like a glove, without visible gaps and transitions.

Restoration of kitchen facades

Of all the parts of a headset, fronts attract the most attention, so leaving them damaged is simply a crime. Restoration of facades of MDF kitchen furniture is quite simple - external damage can be easily hidden with vinyl film or painted over. Restoration of solid kitchen fronts varnished is more difficult, because requires careful stripping of the old coating and repeated application.

Restoration of kitchen facades will eliminate:

• holes in the panel insert;
• cracking of wooden frames of facades;
• peeling and faded paint;
• cracked glass and prefabricated stained-glass windows;
• faulty door hinges and fasteners.

Professional restoration of wooden facades of the kitchen requires a lot of ingenuity. When working with solid wood products, a small mistake during the assembly of thermal seams is enough to create a distortion or stress, which will later lead to the spreading of the facade frame. That is why it is better to entrust the restoration of solid wood kitchen facades to specialists.

In the workshop, we maintain optimal conditions for gluing and drying products, adjusting wooden parts with precision, and monitoring the moisture level of the wood. The restoration of kitchen facades that have suffered from dampness can take a decent amount of time. But when completed, they will look perfect on wall cabinets and drawers.

Restoration of a kitchen set

Restoration of a kitchen set entirely more than logical if it was purchased 15 or more years ago. With such a solid age, its appearance and functionality require the intervention of a master.

We begin the restoration of kitchen furniture, first of all, with an assessment of the strength of the assembly and mechanisms. If they do not cause complaints, then you can focus on restoring the finish. It is recommended to change the paint and varnish on the facades, even they are visually intact, one way or another they fade or fade over time. Taking into account the unfavorable conditions for the restoration of the kitchen set, the most resistant varnishes and paints are selected; oil or drying oils for wood are not suitable for processing.

By the way, if redevelopment was planned in the kitchen for a long time, then the restoration of kitchen furniture will be a convenient reason to re-arrange the cabinets and rearrange the bedside tables. Furnishings can be arranged so that there is more free space around, and cutlery and dishes are at your fingertips.

Sometimes the old interior gets bored and you want to update the atmosphere with new interesting elements. The question of how to update the kitchen set, in this case, becomes very relevant. Especially if the old kitchen furniture functions quite well, and there is no desire to change the set to similar analogues. There is no point in contacting restoration specialists when you can remake kitchen furniture with your own hands at minimal cost. Designers will reveal the secrets of a unique headset upgrade.

accessories

Repair of kitchen sets, first of all, should be started with an inspection of hinges, guides, handles - all fittings that are responsible for ease of use and functionality. It often happens that at the junctions of the mechanisms with the facade, the holes have become wider than necessary, or part of the canvas is completely missing. Then the headset door becomes loose and lopsided. Dismantling and moving the fittings to a new location will help correct the situation. For work you will need:

• putty;
• screwdriver or screwdriver;
• putty knife;
• sandpaper;
• new fittings;
• varnish or paint to match the color of the headset.

Updating the kitchen set begins with the dismantling of old mechanisms. It is better to remove the doors altogether for ease of repair. Old holes are no longer suitable for fixing fittings, so they must be sealed with putty in 2-3 layers. It is better to choose an acrylic-based substance that matches the color of the facade for good camouflage. After the material settles a little, it must be sanded with sandpaper so that there are no bumps and bulges and opened with varnish or paint.

Next, you need to drill new holes and install the appropriate fittings. It is not difficult to pick it up yourself: just show the old part to a sales assistant in a hardware store - and he will immediately offer a suitable analogue. In drawers, when the guides fail, it is recommended to update the roller mechanism with a new ball mechanism, because. it is more reliable. If you need to update the handle, it is advisable to choose it according to style and material. For example, a plastic product looks out of place on a wooden kitchen facade, so it is better to stop at a metal handle with wooden or glass inserts.

Perhaps someone will like the mortise handles, ideal for a modern kitchen

Vinyl film

Pasting kitchen facades with self-adhesive film is the most budget option on how to update an old kitchen set with your own hands. Manufacturers offer a wide range of self-adhesives of different colors and textures: matte or glossy, textured and even, with or without patterns. The service life of such a coating is on average 3-4 years. The material is characterized by good moisture resistance, resistance to temperature extremes. It is noteworthy that you can update the facade of the kitchen with this method even on plastic coatings. In order to transform old furniture, you will need:

• scissors;
• plastic spatula or scraper;
• vinyl film;
• soft centimeter and ruler.

Before you restore a kitchen set, you should measure all doors and cabinets in order to understand how much vinyl film you need to purchase in order to update the kitchen set. It is advisable to purchase a little more self-adhesive tape so that you can correct possible errors. Next, you should disassemble the facade, number each part to facilitate the final assembly of the headset. Using a ruler, you need to measure the desired pieces on paper and cut them out with scissors. For ease of use, there are usually markings in the form of 1x1 cm squares on the reverse side. When cutting out parts, it is recommended to leave a margin of 2 cm on the sides and be sure to take into account bends.

Before you update the facades of the old kitchen, you should thoroughly wash the surfaces of the headset from grease and soot, otherwise the film simply will not stick. After washing, the parts should be degreased and allowed to dry completely. The next stage of work is directly pasting with a film. It is necessary to remove a part of the protective layer from the wrong side of 5-10 cm and press it to the surface. The film must be immediately straightened and smoothed with a spatula or scraper so that there are no bumps and bends. The formed bubbles can be pierced with a needle. It is necessary to glue in the direction from top to bottom, gradually removing the protective layer and at the same time smoothing the self-adhesive. If something went wrong, the film can be removed and re-glued, but not more than twice, since the adhesive will quickly lose its properties. The film is strongly attracted to the surface after 5-6 hours, so there is a chance to correct errors and update the headset at the proper level.

After work, kitchen facades can be installed back and fastened with fittings. A bright stylish set will certainly refresh the interior, bring a touch of originality and style. You can take a pattern with imitation of wood or marble, or you can choose just a plain coating. Designers recommend combining 2 colors when pasting a headset: for example, white hanging drawers and a brown lower tier. Photos of the updated kitchen furniture with their own hands are presented on the site.

Decoupage

For an interior in an ethnic country style, Provence, the restoration of a kitchen set can be based on the decoupage method, which is widely used by modern designers. Hand-made things are in great demand, as they reflect the inner world of the hostess, her talent and skills. As a material, you can use fabric or oilcloth with a pattern or ornament you like, for example, “Gzhel” or “Petrikovskaya painting”. For work you will also need:

• spatula and paint brush with a long narrow brush;
• sandpaper;
• putty;
• PVA glue;
• solvent.

Before updating the facade of a kitchen set, the surface should be sanded first with coarse-grained and then fine-grained sandpaper. A grinder will greatly facilitate manual labor. If there are cracks in the headset, they should be repaired with putty. After applying a thin layer, it is necessary to wait until it dries completely and grind again so that the surface becomes smooth and even, without depressions and bumps. The solvent will help degrease the facade so that the future material is well attached to the panel. By the way, the decoupage technique can be used not only for wooden, but also for plastic and glass kitchen sets. It is necessary to process only those parts of the surface where the new material will be attached.

After drying, glue the fabric on ordinary PVA glue, and then open the surface with acrylic varnish. For this, a narrow and flexible brush with long bristles is suitable so that there are no gaps and pale spots on the facades. The varnish is applied to the headset in 3-4 thin layers. Each layer dries in about 1-2 hours, and the headset will be ready in a day.

The rattan fabric on the facades looks very interesting. To work, you need to measure and cut off the desired piece and soak the material in cold water. After half an hour, it will swell and increase slightly in size, so it will be easier to update the product. Wet rattan must be applied to the surface, smoothed, stretched and fixed along the edges with a furniture stapler. This fastening is more reliable, however, if desired, you can use superglue or PVA. After that, you should attach the planks around the perimeter, join them to each other at an angle of 45 degrees and nail them with nails without caps. Such moldings will close the visible fasteners and give the headset a coherent and harmonious appearance. After drying, the rattan will look like a stretched string.

There is another interesting way to update the kitchen set with your own hands. If there are no doors in the hanging cabinets or they are transparent, you can upholster the inside of the kitchen furniture with fabric. The material should be selected from the overall concept of the interior so that it is in harmony with other elements. First you need to measure the cabinet and cut the fabric into the desired pieces, leaving a small gap. Next, the fabric is strongly stretched at the corners of the niche and fixed with self-tapping screws or a furniture stapler. Such restoration of kitchen furniture will make the room more comfortable and homely. In addition, dishes and decor items on decorated shelves look very elegant than on a plain background, especially in a Provence or country interior.

Painting and moldings

Peeling paint, cracks, chips - all these are the consequences of long-term operation of the kitchen set. You can eliminate them and update the furniture yourself with the help of ordinary staining. Designers recommend choosing auto enamel, which, in terms of properties and characteristics, significantly outperforms acrylic paint. The substance makes the surface more durable, moisture resistant, wear-resistant and resistant to mechanical damage. The advantage of acrylic paint is its low price (100-400 rubles per 1 liter), while car enamel costs 2-3 times more. However, the acrylic surface will become unusable much faster, so before restoring the old kitchen set with your own hands, you should carefully weigh the pros and cons.

For work you will need:

• grinder or sandpaper;
• putty;
• primer;
• solvent;
• wooden planks;
• paint or enamel matching the color of the original product;
• brush or roller.

Before starting work, it is necessary to dismantle the facades and number each part of the headset for the convenience of subsequent assembly. It is advisable to comfortably equip the workplace by covering it with newspapers or oilcloth so that the paint does not get on the floor or other furniture. If there are decorative elements on the facades, it is worth sticking them with masking tape, like other fittings, including hinges. Then the surface should be sanded with a machine or sandpaper to remove old varnish or paint. If the headset is covered with PVC film, it is recommended to use a building hair dryer. It will melt the coating and make it easier to remove. In the process of work, it is necessary to wear a respirator, since the smell from the film will be very caustic and toxic. Next, putty and primed the surface in two layers, leave to dry.

During this time, you can prepare the moldings. They can be smooth, textured, with imitation of stucco - it all depends on the desire and ability of the owner. Wooden panels must be sanded and joined to each other at an angle of 45 degrees to make an even rectangle or square. After that, they should be applied to the dried surface and glued to the construction adhesive or fixed with nails without hats. The facade is degreased with a solvent, and the staining process begins.

Paint or car enamel is recommended to be applied with a brush in one direction, or you can use a soft roller if the surface is large enough. To update the headset, you can use an aerosol, but in the process, be sure to wear a respirator and goggles. After the layer has completely dried, repeat the procedure 1-2 more times. After a day, the parts can be installed in place.

Varnishing, glisal or stain treatment

Sometimes ordinary staining seems very banal - then glisal comes to the rescue. This is a thick translucent paint with a glossy finish. It must be diluted with water in the proportion indicated in the instructions. The technology of work is the same as conventional painting, however, until the layer is dry, the surface of the headset can be given an unusual texture. With the help of polyethylene or a damp sponge, it is necessary to draw chaotic movements along the facade, leaving behind bizarre patterns and lines. If you don’t like some drawings, you can remove them with a roller. This way, how to update the facades of the kitchen with your own hands, will appeal to lovers of decoupage and ethnic style.

For a wooden headset, ordinary varnishing is suitable. Such restoration will help to preserve the original appearance of the product without violating its structure and design. Opening with varnish is desirable to do on the street or in non-residential premises, since the substance has a sharp and pungent odor. The same applies to stains. This is the coating with which the headset takes on a retro look. Furniture aging is also suitable for Provence or country interiors. Both stain and varnish are applied to a previously cleaned and sanded surface. After work, you need to leave the headset to dry for a day.

Table top restoration

The question of how to update the countertop of a kitchen set is most common, since the surface is systematically subjected to mechanical damage and quickly becomes unusable. The most budgetary options include staining and varnishing, but a more practical way would be decoupage and finishing the headset with ceramic tiles. Well, if the material is combined with the finish of the apron - then the interior will look stylish and harmonious. The tile is glued to the base with a special adhesive that firmly fixes the parts and dries quickly.

As for the restoration of the kitchen table, varnishing and staining are also suitable here. If the product is made of fiberboard, you can apply film pasting and decoupage technique.

Chair renovation

Knowing how to update the kitchen with your own hands, you should not forget about the chairs, which also wear out quickly and become less attractive. If these are ordinary wooden stools, you can simply paint and varnish them like the rest of the set, after sanding and treating them with a degreaser. If there is fabric upholstery, it is recommended to replace it. For seat upholstery you will need:

• the cloth;
• scissors;
• cardboard;
• pencil;
• foam rubber or batting;
• Super glue;
• construction gun.

Before starting work, you should dismantle the old upholstery, worn foam rubber. If the legs are loose, the fittings must be tightened to give stability or replaced with a new one. Next, you need to attach cardboard to the seat and circle around the contour, leaving a gap of 3 cm. Using the pattern, the desired piece of batting or foam rubber is cut out, which is glued to the seat with superglue. Next, the template is applied to the fabric and outlined along the contour, but with a gap of 12 cm, which are necessary to wrap around the fabric of the chair. When cutting fabric, it is recommended to pay attention to the pattern so that it is not skewed or displaced. Next, the material should be applied to the seat, stretched, smoothed and fixed with a construction gun or staples from the bottom of the chair, under the base. It is desirable that there are no large folds. The new chair is ready.

Another practical option is sewing chair covers. Firstly, the frame is not visible, so there is no need to repaint the base, back and legs. Secondly, if necessary, the cover can be removed and washed, so the furniture will always have a neat and clean look. When choosing a material, pay attention to the quality and color so that the fabric is easily washed off stains and does not absorb odors so much.

There are many ways to update old furniture yourself at home. It’s good if household members join the process - this way the work will go easier and more fun. The main thing is a creative non-standard approach, creativity and a little imagination. Then the updated set will become the real pride of the owners and the decoration of any interior.

Video: how to independently paste over the headset with vinyl film.

Do you want something new and fresh in the interior of the kitchen, but you don’t want to start a global renovation? A great option is to decorate an old kitchen so that the room sparkles with new colors. From this article you will learn how to transform the interior beyond recognition at low material and labor costs. All you need is a little imagination and materials at hand. Go!

IDEA #1

An option from the “cheap and cheerful” category is to use a self-adhesive film. This relatively inexpensive material, after simple manipulations, will change the furniture beyond recognition. The stores offer a large selection of such films: they are one-color or with bright unusual prints, they can imitate any material: marble, tile, wood, etc. See what a wide choice you have before you? In addition to decorative properties, high-quality film is also valued for something else: it is moisture resistant, not afraid of temperature effects and mechanical damage. Thanks to this, it can be glued not only on the facade of the kitchen, but also on the countertop.

Renovating an old kitchen this way won't take long. The list of necessary tools is not so big, if not tiny. To restore beauty, you will need the material itself, scissors and a ruler. By the way, some companies put a grid on the paper on the back of the film, so you can cut it perfectly even. If global changes are not needed and you just want to refresh the look of the room, then you can purchase vinyl stickers. They can be glued to any flat surface: kitchen facade, refrigerator, table, apron. Manufacturers offer different themes for stickers: it can be delicate flowers or funny images of animals.

IDEA #2

The most obvious option for remodeling an old kitchen with your own hands is to paint it. A new color can give furniture new life. Be sure your guests will think you've got a brand new headset! An option for the brave is to combine several colors, then the changes will be dramatic.

IDEA #3

How to restore an old kitchen with other materials, ceramic tiles for example? This is a stereotype that it can only be on the wall. Such material will look great on the kitchen facade! The tile can be the same as on the apron - if you do not know where to put the leftovers after the repair. Then the motifs on different surfaces will overlap, and the kitchen will become very harmonious. Otherwise, you can play on contrasts and decorate the doors contrary to the general style of the room.

How to do this trick? It's simple: remove the doors from the hinges, clean their surface, paint if necessary. The tile is attached to the facade with a special adhesive. If the pattern does not seem self-sufficient to you, then you can frame the tile in a frame of decorative molding.

IDEA #4

If the methods described above do not suit you, then you still have to violate the integrity of the furniture. We offer to make a new one from the old kitchen with the help of new doors. Of all the proposals, this option is the most expensive, however, the result will be more noticeable. In any case, it will cost much less than buying a new headset. If the model of your kitchen is quite popular, then it will not be difficult to find its facade. If such furniture is out of fashion or was not very common at all, then you will have to look for or order doors. Fortunately, there are a lot of companies that offer such services.

You can vary the cost of restoring an old kitchen. Cheap options: doors made of pine, plastic, chipboard. MDF or solid wood will have to be spent more seriously. The installation of new doors can be done by specialists from the same company where you ordered them. However, anyone who knows the word “repair” firsthand will cope with this simple task. Modern furniture is assembled, as a rule, quickly and effortlessly.

And a few more tricks on how to redo an old kitchen.

Trick number 1

Lazy Tip: You don't have to redo an old kitchen to make it look new. You can just take your eyes off the old furniture with bright accessories. Colored curtains, clocks, dishes - and all eyes are on them. However, keep in mind that if the condition of the furniture is very much in need of repair, then such a trick will not always be successful. Another nuance: kitchen cabinets should be neutral in color, otherwise the placement of accents will only make the interior unnecessarily colorful.

Trick number 2

Open shelves will lighten the interior of the kitchen. They also provide more options for design, because in this case the content of the shelves will set the tone for it. Beautiful dishes, original jars for storing cereals - and now the boring kitchen has turned into an island of brightness. To change the interior, just change a few items. Thanks to this, the room will not have time to bore you.

Trick number 3

Buy black or brown paint and paint over one cabinet or part of the door. And here in the room there was a place for notes. Here you can mark a list of products to buy or favorite recipes. Also, the surface will fit in order to leave a message at home. By the way, you can buy special vinyl stickers on which you can write with chalk. Then you won't have to mess around with paint.

Trick number 4

Who would have thought that simple handles could change the interior so much? It seems like such a small detail! But their replacement will be noticeable. By the way, long tubular handles are very fashionable now. They will turn even Soviet furniture into a modern set.

Trick number 5

If you want to follow the rustic style when remodeling the kitchen, you can replace the cabinet doors with curtains. So the interior will become more airy. In addition, it will be easier to get close to the dishes.

Trick number 6

Moldings are decorative three-dimensional elements that can turn an ordinary closet into an exquisite piece of furniture. It is attached with special glue.